libarchive-static 1.0.6 → 1.1.0

data/ext/{zlib-1.2.5 → zlib-1.2.13}/inflate.h

@@ -1,5 +1,5 @@
 /* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2009 Mark Adler
+ * Copyright (C) 1995-2019 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -18,7 +18,7 @@
 
 /* Possible inflate modes between inflate() calls */
 typedef enum {
-    HEAD,       /* i: waiting for magic header */
+    HEAD = 16180,   /* i: waiting for magic header */
     FLAGS,      /* i: waiting for method and flags (gzip) */
     TIME,       /* i: waiting for modification time (gzip) */
     OS,         /* i: waiting for extra flags and operating system (gzip) */
@@ -77,13 +77,17 @@ typedef enum {
         CHECK -> LENGTH -> DONE
  */
 
-/* state maintained between inflate() calls.  Approximately 10K bytes. */
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
 struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
     inflate_mode mode;          /* current inflate mode */
     int last;                   /* true if processing last block */
-    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
     int havedict;               /* true if dictionary provided */
-    int flags;                  /* gzip header method and flags (0 if zlib) */
+    int flags;                  /* gzip header method and flags, 0 if zlib, or
+                                   -1 if raw or no header yet */
     unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
     unsigned long check;        /* protected copy of check value */
     unsigned long total;        /* protected copy of output count */

data/ext/{zlib-1.2.5 → zlib-1.2.13}/inftrees.c

@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2010 Mark Adler
+ * Copyright (C) 1995-2022 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
+   " inflate 1.2.13 Copyright 1995-2022 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -54,7 +54,7 @@ unsigned short FAR *work;
     code FAR *next;             /* next available space in table */
     const unsigned short FAR *base;     /* base value table to use */
     const unsigned short FAR *extra;    /* extra bits table to use */
-    int end;                    /* use base and extra for symbol > end */
+    unsigned match;             /* use base and extra for symbol >= match */
     unsigned short count[MAXBITS+1];    /* number of codes of each length */
     unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
     static const unsigned short lbase[31] = { /* Length codes 257..285 base */
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 194, 65};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -181,19 +181,17 @@ unsigned short FAR *work;
     switch (type) {
     case CODES:
         base = extra = work;    /* dummy value--not used */
-        end = 19;
+        match = 20;
         break;
     case LENS:
         base = lbase;
-        base -= 257;
         extra = lext;
-        extra -= 257;
-        end = 256;
+        match = 257;
         break;
-    default:            /* DISTS */
+    default:    /* DISTS */
         base = dbase;
         extra = dext;
-        end = -1;
+        match = 0;
     }
 
     /* initialize state for loop */
@@ -208,21 +206,21 @@ unsigned short FAR *work;
     mask = used - 1;            /* mask for comparing low */
 
     /* check available table space */
-    if ((type == LENS && used >= ENOUGH_LENS) ||
-        (type == DISTS && used >= ENOUGH_DISTS))
+    if ((type == LENS && used > ENOUGH_LENS) ||
+        (type == DISTS && used > ENOUGH_DISTS))
         return 1;
 
     /* process all codes and make table entries */
     for (;;) {
         /* create table entry */
         here.bits = (unsigned char)(len - drop);
-        if ((int)(work[sym]) < end) {
+        if (work[sym] + 1U < match) {
             here.op = (unsigned char)0;
             here.val = work[sym];
         }
-        else if ((int)(work[sym]) > end) {
-            here.op = (unsigned char)(extra[work[sym]]);
-            here.val = base[work[sym]];
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
         }
         else {
             here.op = (unsigned char)(32 + 64);         /* end of block */
@@ -277,8 +275,8 @@ unsigned short FAR *work;
 
             /* check for enough space */
             used += 1U << curr;
-            if ((type == LENS && used >= ENOUGH_LENS) ||
-                (type == DISTS && used >= ENOUGH_DISTS))
+            if ((type == LENS && used > ENOUGH_LENS) ||
+                (type == DISTS && used > ENOUGH_DISTS))
                 return 1;
 
             /* point entry in root table to sub-table */
@@ -289,38 +287,14 @@ unsigned short FAR *work;
         }
     }
 
-    /*
-       Fill in rest of table for incomplete codes.  This loop is similar to the
-       loop above in incrementing huff for table indices.  It is assumed that
-       len is equal to curr + drop, so there is no loop needed to increment
-       through high index bits.  When the current sub-table is filled, the loop
-       drops back to the root table to fill in any remaining entries there.
-     */
-    here.op = (unsigned char)64;                /* invalid code marker */
-    here.bits = (unsigned char)(len - drop);
-    here.val = (unsigned short)0;
-    while (huff != 0) {
-        /* when done with sub-table, drop back to root table */
-        if (drop != 0 && (huff & mask) != low) {
-            drop = 0;
-            len = root;
-            next = *table;
-            here.bits = (unsigned char)len;
-        }
-
-        /* put invalid code marker in table */
-        next[huff >> drop] = here;
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
+       at most one remaining entry, since if the code is incomplete, the
+       maximum code length that was allowed to get this far is one bit) */
+    if (huff != 0) {
+        here.op = (unsigned char)64;            /* invalid code marker */
+        here.bits = (unsigned char)(len - drop);
+        here.val = (unsigned short)0;
+        next[huff] = here;
     }
 
     /* set return parameters */

data/ext/{zlib-1.2.5 → zlib-1.2.13}/inftrees.h

@@ -38,7 +38,7 @@ typedef struct {
 /* Maximum size of the dynamic table.  The maximum number of code structures is
    1444, which is the sum of 852 for literal/length codes and 592 for distance
    codes.  These values were found by exhaustive searches using the program
-   examples/enough.c found in the zlib distribtution.  The arguments to that
+   examples/enough.c found in the zlib distribution.  The arguments to that
    program are the number of symbols, the initial root table size, and the
    maximum bit length of a code.  "enough 286 9 15" for literal/length codes
    returns returns 852, and "enough 30 6 15" for distance codes returns 592.