grpc 1.50.0.pre1-x86_64-linux → 1.52.0.pre2-x86_64-linux

data/third_party/re2/re2/re2.h

@@ -1,1017 +0,0 @@
-// Copyright 2003-2009 The RE2 Authors.  All Rights Reserved.
-// Use of this source code is governed by a BSD-style
-// license that can be found in the LICENSE file.
-
-#ifndef RE2_RE2_H_
-#define RE2_RE2_H_
-
-// C++ interface to the re2 regular-expression library.
-// RE2 supports Perl-style regular expressions (with extensions like
-// \d, \w, \s, ...).
-//
-// -----------------------------------------------------------------------
-// REGEXP SYNTAX:
-//
-// This module uses the re2 library and hence supports
-// its syntax for regular expressions, which is similar to Perl's with
-// some of the more complicated things thrown away.  In particular,
-// backreferences and generalized assertions are not available, nor is \Z.
-//
-// See https://github.com/google/re2/wiki/Syntax for the syntax
-// supported by RE2, and a comparison with PCRE and PERL regexps.
-//
-// For those not familiar with Perl's regular expressions,
-// here are some examples of the most commonly used extensions:
-//
-//   "hello (\\w+) world"  -- \w matches a "word" character
-//   "version (\\d+)"      -- \d matches a digit
-//   "hello\\s+world"      -- \s matches any whitespace character
-//   "\\b(\\w+)\\b"        -- \b matches non-empty string at word boundary
-//   "(?i)hello"           -- (?i) turns on case-insensitive matching
-//   "/\\*(.*?)\\*/"       -- .*? matches . minimum no. of times possible
-//
-// The double backslashes are needed when writing C++ string literals.
-// However, they should NOT be used when writing C++11 raw string literals:
-//
-//   R"(hello (\w+) world)"  -- \w matches a "word" character
-//   R"(version (\d+))"      -- \d matches a digit
-//   R"(hello\s+world)"      -- \s matches any whitespace character
-//   R"(\b(\w+)\b)"          -- \b matches non-empty string at word boundary
-//   R"((?i)hello)"          -- (?i) turns on case-insensitive matching
-//   R"(/\*(.*?)\*/)"        -- .*? matches . minimum no. of times possible
-//
-// When using UTF-8 encoding, case-insensitive matching will perform
-// simple case folding, not full case folding.
-//
-// -----------------------------------------------------------------------
-// MATCHING INTERFACE:
-//
-// The "FullMatch" operation checks that supplied text matches a
-// supplied pattern exactly.
-//
-// Example: successful match
-//    CHECK(RE2::FullMatch("hello", "h.*o"));
-//
-// Example: unsuccessful match (requires full match):
-//    CHECK(!RE2::FullMatch("hello", "e"));
-//
-// -----------------------------------------------------------------------
-// UTF-8 AND THE MATCHING INTERFACE:
-//
-// By default, the pattern and input text are interpreted as UTF-8.
-// The RE2::Latin1 option causes them to be interpreted as Latin-1.
-//
-// Example:
-//    CHECK(RE2::FullMatch(utf8_string, RE2(utf8_pattern)));
-//    CHECK(RE2::FullMatch(latin1_string, RE2(latin1_pattern, RE2::Latin1)));
-//
-// -----------------------------------------------------------------------
-// MATCHING WITH SUBSTRING EXTRACTION:
-//
-// You can supply extra pointer arguments to extract matched substrings.
-// On match failure, none of the pointees will have been modified.
-// On match success, the substrings will be converted (as necessary) and
-// their values will be assigned to their pointees until all conversions
-// have succeeded or one conversion has failed.
-// On conversion failure, the pointees will be in an indeterminate state
-// because the caller has no way of knowing which conversion failed.
-// However, conversion cannot fail for types like string and StringPiece
-// that do not inspect the substring contents. Hence, in the common case
-// where all of the pointees are of such types, failure is always due to
-// match failure and thus none of the pointees will have been modified.
-//
-// Example: extracts "ruby" into "s" and 1234 into "i"
-//    int i;
-//    std::string s;
-//    CHECK(RE2::FullMatch("ruby:1234", "(\\w+):(\\d+)", &s, &i));
-//
-// Example: fails because string cannot be stored in integer
-//    CHECK(!RE2::FullMatch("ruby", "(.*)", &i));
-//
-// Example: fails because there aren't enough sub-patterns
-//    CHECK(!RE2::FullMatch("ruby:1234", "\\w+:\\d+", &s));
-//
-// Example: does not try to extract any extra sub-patterns
-//    CHECK(RE2::FullMatch("ruby:1234", "(\\w+):(\\d+)", &s));
-//
-// Example: does not try to extract into NULL
-//    CHECK(RE2::FullMatch("ruby:1234", "(\\w+):(\\d+)", NULL, &i));
-//
-// Example: integer overflow causes failure
-//    CHECK(!RE2::FullMatch("ruby:1234567891234", "\\w+:(\\d+)", &i));
-//
-// NOTE(rsc): Asking for substrings slows successful matches quite a bit.
-// This may get a little faster in the future, but right now is slower
-// than PCRE.  On the other hand, failed matches run *very* fast (faster
-// than PCRE), as do matches without substring extraction.
-//
-// -----------------------------------------------------------------------
-// PARTIAL MATCHES
-//
-// You can use the "PartialMatch" operation when you want the pattern
-// to match any substring of the text.
-//
-// Example: simple search for a string:
-//      CHECK(RE2::PartialMatch("hello", "ell"));
-//
-// Example: find first number in a string
-//      int number;
-//      CHECK(RE2::PartialMatch("x*100 + 20", "(\\d+)", &number));
-//      CHECK_EQ(number, 100);
-//
-// -----------------------------------------------------------------------
-// PRE-COMPILED REGULAR EXPRESSIONS
-//
-// RE2 makes it easy to use any string as a regular expression, without
-// requiring a separate compilation step.
-//
-// If speed is of the essence, you can create a pre-compiled "RE2"
-// object from the pattern and use it multiple times.  If you do so,
-// you can typically parse text faster than with sscanf.
-//
-// Example: precompile pattern for faster matching:
-//    RE2 pattern("h.*o");
-//    while (ReadLine(&str)) {
-//      if (RE2::FullMatch(str, pattern)) ...;
-//    }
-//
-// -----------------------------------------------------------------------
-// SCANNING TEXT INCREMENTALLY
-//
-// The "Consume" operation may be useful if you want to repeatedly
-// match regular expressions at the front of a string and skip over
-// them as they match.  This requires use of the "StringPiece" type,
-// which represents a sub-range of a real string.
-//
-// Example: read lines of the form "var = value" from a string.
-//      std::string contents = ...;     // Fill string somehow
-//      StringPiece input(contents);    // Wrap a StringPiece around it
-//
-//      std::string var;
-//      int value;
-//      while (RE2::Consume(&input, "(\\w+) = (\\d+)\n", &var, &value)) {
-//        ...;
-//      }
-//
-// Each successful call to "Consume" will set "var/value", and also
-// advance "input" so it points past the matched text.  Note that if the
-// regular expression matches an empty string, input will advance
-// by 0 bytes.  If the regular expression being used might match
-// an empty string, the loop body must check for this case and either
-// advance the string or break out of the loop.
-//
-// The "FindAndConsume" operation is similar to "Consume" but does not
-// anchor your match at the beginning of the string.  For example, you
-// could extract all words from a string by repeatedly calling
-//     RE2::FindAndConsume(&input, "(\\w+)", &word)
-//
-// -----------------------------------------------------------------------
-// USING VARIABLE NUMBER OF ARGUMENTS
-//
-// The above operations require you to know the number of arguments
-// when you write the code.  This is not always possible or easy (for
-// example, the regular expression may be calculated at run time).
-// You can use the "N" version of the operations when the number of
-// match arguments are determined at run time.
-//
-// Example:
-//   const RE2::Arg* args[10];
-//   int n;
-//   // ... populate args with pointers to RE2::Arg values ...
-//   // ... set n to the number of RE2::Arg objects ...
-//   bool match = RE2::FullMatchN(input, pattern, args, n);
-//
-// The last statement is equivalent to
-//
-//   bool match = RE2::FullMatch(input, pattern,
-//                               *args[0], *args[1], ..., *args[n - 1]);
-//
-// -----------------------------------------------------------------------
-// PARSING HEX/OCTAL/C-RADIX NUMBERS
-//
-// By default, if you pass a pointer to a numeric value, the
-// corresponding text is interpreted as a base-10 number.  You can
-// instead wrap the pointer with a call to one of the operators Hex(),
-// Octal(), or CRadix() to interpret the text in another base.  The
-// CRadix operator interprets C-style "0" (base-8) and "0x" (base-16)
-// prefixes, but defaults to base-10.
-//
-// Example:
-//   int a, b, c, d;
-//   CHECK(RE2::FullMatch("100 40 0100 0x40", "(.*) (.*) (.*) (.*)",
-//         RE2::Octal(&a), RE2::Hex(&b), RE2::CRadix(&c), RE2::CRadix(&d));
-// will leave 64 in a, b, c, and d.
-
-#include <stddef.h>
-#include <stdint.h>
-#include <algorithm>
-#include <map>
-#include <mutex>
-#include <string>
-#include <type_traits>
-#include <vector>
-
-#if defined(__APPLE__)
-#include <TargetConditionals.h>
-#endif
-
-#include "re2/stringpiece.h"
-
-namespace re2 {
-class Prog;
-class Regexp;
-}  // namespace re2
-
-namespace re2 {
-
-// Interface for regular expression matching.  Also corresponds to a
-// pre-compiled regular expression.  An "RE2" object is safe for
-// concurrent use by multiple threads.
-class RE2 {
- public:
-  // We convert user-passed pointers into special Arg objects
-  class Arg;
-  class Options;
-
-  // Defined in set.h.
-  class Set;
-
-  enum ErrorCode {
-    NoError = 0,
-
-    // Unexpected error
-    ErrorInternal,
-
-    // Parse errors
-    ErrorBadEscape,          // bad escape sequence
-    ErrorBadCharClass,       // bad character class
-    ErrorBadCharRange,       // bad character class range
-    ErrorMissingBracket,     // missing closing ]
-    ErrorMissingParen,       // missing closing )
-    ErrorUnexpectedParen,    // unexpected closing )
-    ErrorTrailingBackslash,  // trailing \ at end of regexp
-    ErrorRepeatArgument,     // repeat argument missing, e.g. "*"
-    ErrorRepeatSize,         // bad repetition argument
-    ErrorRepeatOp,           // bad repetition operator
-    ErrorBadPerlOp,          // bad perl operator
-    ErrorBadUTF8,            // invalid UTF-8 in regexp
-    ErrorBadNamedCapture,    // bad named capture group
-    ErrorPatternTooLarge     // pattern too large (compile failed)
-  };
-
-  // Predefined common options.
-  // If you need more complicated things, instantiate
-  // an Option class, possibly passing one of these to
-  // the Option constructor, change the settings, and pass that
-  // Option class to the RE2 constructor.
-  enum CannedOptions {
-    DefaultOptions = 0,
-    Latin1, // treat input as Latin-1 (default UTF-8)
-    POSIX, // POSIX syntax, leftmost-longest match
-    Quiet // do not log about regexp parse errors
-  };
-
-  // Need to have the const char* and const std::string& forms for implicit
-  // conversions when passing string literals to FullMatch and PartialMatch.
-  // Otherwise the StringPiece form would be sufficient.
-#ifndef SWIG
-  RE2(const char* pattern);
-  RE2(const std::string& pattern);
-#endif
-  RE2(const StringPiece& pattern);
-  RE2(const StringPiece& pattern, const Options& options);
-  ~RE2();
-
-  // Returns whether RE2 was created properly.
-  bool ok() const { return error_code() == NoError; }
-
-  // The string specification for this RE2.  E.g.
-  //   RE2 re("ab*c?d+");
-  //   re.pattern();    // "ab*c?d+"
-  const std::string& pattern() const { return pattern_; }
-
-  // If RE2 could not be created properly, returns an error string.
-  // Else returns the empty string.
-  const std::string& error() const { return *error_; }
-
-  // If RE2 could not be created properly, returns an error code.
-  // Else returns RE2::NoError (== 0).
-  ErrorCode error_code() const { return error_code_; }
-
-  // If RE2 could not be created properly, returns the offending
-  // portion of the regexp.
-  const std::string& error_arg() const { return error_arg_; }
-
-  // Returns the program size, a very approximate measure of a regexp's "cost".
-  // Larger numbers are more expensive than smaller numbers.
-  int ProgramSize() const;
-  int ReverseProgramSize() const;
-
-  // If histogram is not null, outputs the program fanout
-  // as a histogram bucketed by powers of 2.
-  // Returns the number of the largest non-empty bucket.
-  int ProgramFanout(std::vector<int>* histogram) const;
-  int ReverseProgramFanout(std::vector<int>* histogram) const;
-
-  // Returns the underlying Regexp; not for general use.
-  // Returns entire_regexp_ so that callers don't need
-  // to know about prefix_ and prefix_foldcase_.
-  re2::Regexp* Regexp() const { return entire_regexp_; }
-
-  /***** The array-based matching interface ******/
-
-  // The functions here have names ending in 'N' and are used to implement
-  // the functions whose names are the prefix before the 'N'. It is sometimes
-  // useful to invoke them directly, but the syntax is awkward, so the 'N'-less
-  // versions should be preferred.
-  static bool FullMatchN(const StringPiece& text, const RE2& re,
-                         const Arg* const args[], int n);
-  static bool PartialMatchN(const StringPiece& text, const RE2& re,
-                            const Arg* const args[], int n);
-  static bool ConsumeN(StringPiece* input, const RE2& re,
-                       const Arg* const args[], int n);
-  static bool FindAndConsumeN(StringPiece* input, const RE2& re,
-                              const Arg* const args[], int n);
-
-#ifndef SWIG
- private:
-  template <typename F, typename SP>
-  static inline bool Apply(F f, SP sp, const RE2& re) {
-    return f(sp, re, NULL, 0);
-  }
-
-  template <typename F, typename SP, typename... A>
-  static inline bool Apply(F f, SP sp, const RE2& re, const A&... a) {
-    const Arg* const args[] = {&a...};
-    const int n = sizeof...(a);
-    return f(sp, re, args, n);
-  }
-
- public:
-  // In order to allow FullMatch() et al. to be called with a varying number
-  // of arguments of varying types, we use two layers of variadic templates.
-  // The first layer constructs the temporary Arg objects. The second layer
-  // (above) constructs the array of pointers to the temporary Arg objects.
-
-  /***** The useful part: the matching interface *****/
-
-  // Matches "text" against "re".  If pointer arguments are
-  // supplied, copies matched sub-patterns into them.
-  //
-  // You can pass in a "const char*" or a "std::string" for "text".
-  // You can pass in a "const char*" or a "std::string" or a "RE2" for "re".
-  //
-  // The provided pointer arguments can be pointers to any scalar numeric
-  // type, or one of:
-  //    std::string     (matched piece is copied to string)
-  //    StringPiece     (StringPiece is mutated to point to matched piece)
-  //    T               (where "bool T::ParseFrom(const char*, size_t)" exists)
-  //    (void*)NULL     (the corresponding matched sub-pattern is not copied)
-  //
-  // Returns true iff all of the following conditions are satisfied:
-  //   a. "text" matches "re" fully - from the beginning to the end of "text".
-  //   b. The number of matched sub-patterns is >= number of supplied pointers.
-  //   c. The "i"th argument has a suitable type for holding the
-  //      string captured as the "i"th sub-pattern.  If you pass in
-  //      NULL for the "i"th argument, or pass fewer arguments than
-  //      number of sub-patterns, the "i"th captured sub-pattern is
-  //      ignored.
-  //
-  // CAVEAT: An optional sub-pattern that does not exist in the
-  // matched string is assigned the empty string.  Therefore, the
-  // following will return false (because the empty string is not a
-  // valid number):
-  //    int number;
-  //    RE2::FullMatch("abc", "[a-z]+(\\d+)?", &number);
-  template <typename... A>
-  static bool FullMatch(const StringPiece& text, const RE2& re, A&&... a) {
-    return Apply(FullMatchN, text, re, Arg(std::forward<A>(a))...);
-  }
-
-  // Like FullMatch(), except that "re" is allowed to match a substring
-  // of "text".
-  //
-  // Returns true iff all of the following conditions are satisfied:
-  //   a. "text" matches "re" partially - for some substring of "text".
-  //   b. The number of matched sub-patterns is >= number of supplied pointers.
-  //   c. The "i"th argument has a suitable type for holding the
-  //      string captured as the "i"th sub-pattern.  If you pass in
-  //      NULL for the "i"th argument, or pass fewer arguments than
-  //      number of sub-patterns, the "i"th captured sub-pattern is
-  //      ignored.
-  template <typename... A>
-  static bool PartialMatch(const StringPiece& text, const RE2& re, A&&... a) {
-    return Apply(PartialMatchN, text, re, Arg(std::forward<A>(a))...);
-  }
-
-  // Like FullMatch() and PartialMatch(), except that "re" has to match
-  // a prefix of the text, and "input" is advanced past the matched
-  // text.  Note: "input" is modified iff this routine returns true
-  // and "re" matched a non-empty substring of "input".
-  //
-  // Returns true iff all of the following conditions are satisfied:
-  //   a. "input" matches "re" partially - for some prefix of "input".
-  //   b. The number of matched sub-patterns is >= number of supplied pointers.
-  //   c. The "i"th argument has a suitable type for holding the
-  //      string captured as the "i"th sub-pattern.  If you pass in
-  //      NULL for the "i"th argument, or pass fewer arguments than
-  //      number of sub-patterns, the "i"th captured sub-pattern is
-  //      ignored.
-  template <typename... A>
-  static bool Consume(StringPiece* input, const RE2& re, A&&... a) {
-    return Apply(ConsumeN, input, re, Arg(std::forward<A>(a))...);
-  }
-
-  // Like Consume(), but does not anchor the match at the beginning of
-  // the text.  That is, "re" need not start its match at the beginning
-  // of "input".  For example, "FindAndConsume(s, "(\\w+)", &word)" finds
-  // the next word in "s" and stores it in "word".
-  //
-  // Returns true iff all of the following conditions are satisfied:
-  //   a. "input" matches "re" partially - for some substring of "input".
-  //   b. The number of matched sub-patterns is >= number of supplied pointers.
-  //   c. The "i"th argument has a suitable type for holding the
-  //      string captured as the "i"th sub-pattern.  If you pass in
-  //      NULL for the "i"th argument, or pass fewer arguments than
-  //      number of sub-patterns, the "i"th captured sub-pattern is
-  //      ignored.
-  template <typename... A>
-  static bool FindAndConsume(StringPiece* input, const RE2& re, A&&... a) {
-    return Apply(FindAndConsumeN, input, re, Arg(std::forward<A>(a))...);
-  }
-#endif
-
-  // Replace the first match of "re" in "str" with "rewrite".
-  // Within "rewrite", backslash-escaped digits (\1 to \9) can be
-  // used to insert text matching corresponding parenthesized group
-  // from the pattern.  \0 in "rewrite" refers to the entire matching
-  // text.  E.g.,
-  //
-  //   std::string s = "yabba dabba doo";
-  //   CHECK(RE2::Replace(&s, "b+", "d"));
-  //
-  // will leave "s" containing "yada dabba doo"
-  //
-  // Returns true if the pattern matches and a replacement occurs,
-  // false otherwise.
-  static bool Replace(std::string* str,
-                      const RE2& re,
-                      const StringPiece& rewrite);
-
-  // Like Replace(), except replaces successive non-overlapping occurrences
-  // of the pattern in the string with the rewrite. E.g.
-  //
-  //   std::string s = "yabba dabba doo";
-  //   CHECK(RE2::GlobalReplace(&s, "b+", "d"));
-  //
-  // will leave "s" containing "yada dada doo"
-  // Replacements are not subject to re-matching.
-  //
-  // Because GlobalReplace only replaces non-overlapping matches,
-  // replacing "ana" within "banana" makes only one replacement, not two.
-  //
-  // Returns the number of replacements made.
-  static int GlobalReplace(std::string* str,
-                           const RE2& re,
-                           const StringPiece& rewrite);
-
-  // Like Replace, except that if the pattern matches, "rewrite"
-  // is copied into "out" with substitutions.  The non-matching
-  // portions of "text" are ignored.
-  //
-  // Returns true iff a match occurred and the extraction happened
-  // successfully;  if no match occurs, the string is left unaffected.
-  //
-  // REQUIRES: "text" must not alias any part of "*out".
-  static bool Extract(const StringPiece& text,
-                      const RE2& re,
-                      const StringPiece& rewrite,
-                      std::string* out);
-
-  // Escapes all potentially meaningful regexp characters in
-  // 'unquoted'.  The returned string, used as a regular expression,
-  // will match exactly the original string.  For example,
-  //           1.5-2.0?
-  // may become:
-  //           1\.5\-2\.0\?
-  static std::string QuoteMeta(const StringPiece& unquoted);
-
-  // Computes range for any strings matching regexp. The min and max can in
-  // some cases be arbitrarily precise, so the caller gets to specify the
-  // maximum desired length of string returned.
-  //
-  // Assuming PossibleMatchRange(&min, &max, N) returns successfully, any
-  // string s that is an anchored match for this regexp satisfies
-  //   min <= s && s <= max.
-  //
-  // Note that PossibleMatchRange() will only consider the first copy of an
-  // infinitely repeated element (i.e., any regexp element followed by a '*' or
-  // '+' operator). Regexps with "{N}" constructions are not affected, as those
-  // do not compile down to infinite repetitions.
-  //
-  // Returns true on success, false on error.
-  bool PossibleMatchRange(std::string* min, std::string* max,
-                          int maxlen) const;
-
-  // Generic matching interface
-
-  // Type of match.
-  enum Anchor {
-    UNANCHORED,         // No anchoring
-    ANCHOR_START,       // Anchor at start only
-    ANCHOR_BOTH         // Anchor at start and end
-  };
-
-  // Return the number of capturing subpatterns, or -1 if the
-  // regexp wasn't valid on construction.  The overall match ($0)
-  // does not count: if the regexp is "(a)(b)", returns 2.
-  int NumberOfCapturingGroups() const { return num_captures_; }
-
-  // Return a map from names to capturing indices.
-  // The map records the index of the leftmost group
-  // with the given name.
-  // Only valid until the re is deleted.
-  const std::map<std::string, int>& NamedCapturingGroups() const;
-
-  // Return a map from capturing indices to names.
-  // The map has no entries for unnamed groups.
-  // Only valid until the re is deleted.
-  const std::map<int, std::string>& CapturingGroupNames() const;
-
-  // General matching routine.
-  // Match against text starting at offset startpos
-  // and stopping the search at offset endpos.
-  // Returns true if match found, false if not.
-  // On a successful match, fills in submatch[] (up to nsubmatch entries)
-  // with information about submatches.
-  // I.e. matching RE2("(foo)|(bar)baz") on "barbazbla" will return true, with
-  // submatch[0] = "barbaz", submatch[1].data() = NULL, submatch[2] = "bar",
-  // submatch[3].data() = NULL, ..., up to submatch[nsubmatch-1].data() = NULL.
-  // Caveat: submatch[] may be clobbered even on match failure.
-  //
-  // Don't ask for more match information than you will use:
-  // runs much faster with nsubmatch == 1 than nsubmatch > 1, and
-  // runs even faster if nsubmatch == 0.
-  // Doesn't make sense to use nsubmatch > 1 + NumberOfCapturingGroups(),
-  // but will be handled correctly.
-  //
-  // Passing text == StringPiece(NULL, 0) will be handled like any other
-  // empty string, but note that on return, it will not be possible to tell
-  // whether submatch i matched the empty string or did not match:
-  // either way, submatch[i].data() == NULL.
-  bool Match(const StringPiece& text,
-             size_t startpos,
-             size_t endpos,
-             Anchor re_anchor,
-             StringPiece* submatch,
-             int nsubmatch) const;
-
-  // Check that the given rewrite string is suitable for use with this
-  // regular expression.  It checks that:
-  //   * The regular expression has enough parenthesized subexpressions
-  //     to satisfy all of the \N tokens in rewrite
-  //   * The rewrite string doesn't have any syntax errors.  E.g.,
-  //     '\' followed by anything other than a digit or '\'.
-  // A true return value guarantees that Replace() and Extract() won't
-  // fail because of a bad rewrite string.
-  bool CheckRewriteString(const StringPiece& rewrite,
-                          std::string* error) const;
-
-  // Returns the maximum submatch needed for the rewrite to be done by
-  // Replace(). E.g. if rewrite == "foo \\2,\\1", returns 2.
-  static int MaxSubmatch(const StringPiece& rewrite);
-
-  // Append the "rewrite" string, with backslash subsitutions from "vec",
-  // to string "out".
-  // Returns true on success.  This method can fail because of a malformed
-  // rewrite string.  CheckRewriteString guarantees that the rewrite will
-  // be sucessful.
-  bool Rewrite(std::string* out,
-               const StringPiece& rewrite,
-               const StringPiece* vec,
-               int veclen) const;
-
-  // Constructor options
-  class Options {
-   public:
-    // The options are (defaults in parentheses):
-    //
-    //   utf8             (true)  text and pattern are UTF-8; otherwise Latin-1
-    //   posix_syntax     (false) restrict regexps to POSIX egrep syntax
-    //   longest_match    (false) search for longest match, not first match
-    //   log_errors       (true)  log syntax and execution errors to ERROR
-    //   max_mem          (see below)  approx. max memory footprint of RE2
-    //   literal          (false) interpret string as literal, not regexp
-    //   never_nl         (false) never match \n, even if it is in regexp
-    //   dot_nl           (false) dot matches everything including new line
-    //   never_capture    (false) parse all parens as non-capturing
-    //   case_sensitive   (true)  match is case-sensitive (regexp can override
-    //                              with (?i) unless in posix_syntax mode)
-    //
-    // The following options are only consulted when posix_syntax == true.
-    // When posix_syntax == false, these features are always enabled and
-    // cannot be turned off; to perform multi-line matching in that case,
-    // begin the regexp with (?m).
-    //   perl_classes     (false) allow Perl's \d \s \w \D \S \W
-    //   word_boundary    (false) allow Perl's \b \B (word boundary and not)
-    //   one_line         (false) ^ and $ only match beginning and end of text
-    //
-    // The max_mem option controls how much memory can be used
-    // to hold the compiled form of the regexp (the Prog) and
-    // its cached DFA graphs.  Code Search placed limits on the number
-    // of Prog instructions and DFA states: 10,000 for both.
-    // In RE2, those limits would translate to about 240 KB per Prog
-    // and perhaps 2.5 MB per DFA (DFA state sizes vary by regexp; RE2 does a
-    // better job of keeping them small than Code Search did).
-    // Each RE2 has two Progs (one forward, one reverse), and each Prog
-    // can have two DFAs (one first match, one longest match).
-    // That makes 4 DFAs:
-    //
-    //   forward, first-match    - used for UNANCHORED or ANCHOR_START searches
-    //                               if opt.longest_match() == false
-    //   forward, longest-match  - used for all ANCHOR_BOTH searches,
-    //                               and the other two kinds if
-    //                               opt.longest_match() == true
-    //   reverse, first-match    - never used
-    //   reverse, longest-match  - used as second phase for unanchored searches
-    //
-    // The RE2 memory budget is statically divided between the two
-    // Progs and then the DFAs: two thirds to the forward Prog
-    // and one third to the reverse Prog.  The forward Prog gives half
-    // of what it has left over to each of its DFAs.  The reverse Prog
-    // gives it all to its longest-match DFA.
-    //
-    // Once a DFA fills its budget, it flushes its cache and starts over.
-    // If this happens too often, RE2 falls back on the NFA implementation.
-
-    // For now, make the default budget something close to Code Search.
-    static const int kDefaultMaxMem = 8<<20;
-
-    enum Encoding {
-      EncodingUTF8 = 1,
-      EncodingLatin1
-    };
-
-    Options() :
-      encoding_(EncodingUTF8),
-      posix_syntax_(false),
-      longest_match_(false),
-      log_errors_(true),
-      max_mem_(kDefaultMaxMem),
-      literal_(false),
-      never_nl_(false),
-      dot_nl_(false),
-      never_capture_(false),
-      case_sensitive_(true),
-      perl_classes_(false),
-      word_boundary_(false),
-      one_line_(false) {
-    }
-
-    /*implicit*/ Options(CannedOptions);
-
-    Encoding encoding() const { return encoding_; }
-    void set_encoding(Encoding encoding) { encoding_ = encoding; }
-
-    bool posix_syntax() const { return posix_syntax_; }
-    void set_posix_syntax(bool b) { posix_syntax_ = b; }
-
-    bool longest_match() const { return longest_match_; }
-    void set_longest_match(bool b) { longest_match_ = b; }
-
-    bool log_errors() const { return log_errors_; }
-    void set_log_errors(bool b) { log_errors_ = b; }
-
-    int64_t max_mem() const { return max_mem_; }
-    void set_max_mem(int64_t m) { max_mem_ = m; }
-
-    bool literal() const { return literal_; }
-    void set_literal(bool b) { literal_ = b; }
-
-    bool never_nl() const { return never_nl_; }
-    void set_never_nl(bool b) { never_nl_ = b; }
-
-    bool dot_nl() const { return dot_nl_; }
-    void set_dot_nl(bool b) { dot_nl_ = b; }
-
-    bool never_capture() const { return never_capture_; }
-    void set_never_capture(bool b) { never_capture_ = b; }
-
-    bool case_sensitive() const { return case_sensitive_; }
-    void set_case_sensitive(bool b) { case_sensitive_ = b; }
-
-    bool perl_classes() const { return perl_classes_; }
-    void set_perl_classes(bool b) { perl_classes_ = b; }
-
-    bool word_boundary() const { return word_boundary_; }
-    void set_word_boundary(bool b) { word_boundary_ = b; }
-
-    bool one_line() const { return one_line_; }
-    void set_one_line(bool b) { one_line_ = b; }
-
-    void Copy(const Options& src) {
-      *this = src;
-    }
-
-    int ParseFlags() const;
-
-   private:
-    Encoding encoding_;
-    bool posix_syntax_;
-    bool longest_match_;
-    bool log_errors_;
-    int64_t max_mem_;
-    bool literal_;
-    bool never_nl_;
-    bool dot_nl_;
-    bool never_capture_;
-    bool case_sensitive_;
-    bool perl_classes_;
-    bool word_boundary_;
-    bool one_line_;
-  };
-
-  // Returns the options set in the constructor.
-  const Options& options() const { return options_; }
-
-  // Argument converters; see below.
-  template <typename T>
-  static Arg CRadix(T* ptr);
-  template <typename T>
-  static Arg Hex(T* ptr);
-  template <typename T>
-  static Arg Octal(T* ptr);
-
- private:
-  void Init(const StringPiece& pattern, const Options& options);
-
-  bool DoMatch(const StringPiece& text,
-               Anchor re_anchor,
-               size_t* consumed,
-               const Arg* const args[],
-               int n) const;
-
-  re2::Prog* ReverseProg() const;
-
-  std::string pattern_;         // string regular expression
-  Options options_;             // option flags
-  re2::Regexp* entire_regexp_;  // parsed regular expression
-  const std::string* error_;    // error indicator (or points to empty string)
-  ErrorCode error_code_;        // error code
-  std::string error_arg_;       // fragment of regexp showing error
-  std::string prefix_;          // required prefix (before suffix_regexp_)
-  bool prefix_foldcase_;        // prefix_ is ASCII case-insensitive
-  re2::Regexp* suffix_regexp_;  // parsed regular expression, prefix_ removed
-  re2::Prog* prog_;             // compiled program for regexp
-  int num_captures_;            // number of capturing groups
-  bool is_one_pass_;            // can use prog_->SearchOnePass?
-
-  // Reverse Prog for DFA execution only
-  mutable re2::Prog* rprog_;
-  // Map from capture names to indices
-  mutable const std::map<std::string, int>* named_groups_;
-  // Map from capture indices to names
-  mutable const std::map<int, std::string>* group_names_;
-
-  mutable std::once_flag rprog_once_;
-  mutable std::once_flag named_groups_once_;
-  mutable std::once_flag group_names_once_;
-
-  RE2(const RE2&) = delete;
-  RE2& operator=(const RE2&) = delete;
-};
-
-/***** Implementation details *****/
-
-namespace re2_internal {
-
-// Types for which the 3-ary Parse() function template has specializations.
-template <typename T> struct Parse3ary : public std::false_type {};
-template <> struct Parse3ary<void> : public std::true_type {};
-template <> struct Parse3ary<std::string> : public std::true_type {};
-template <> struct Parse3ary<StringPiece> : public std::true_type {};
-template <> struct Parse3ary<char> : public std::true_type {};
-template <> struct Parse3ary<signed char> : public std::true_type {};
-template <> struct Parse3ary<unsigned char> : public std::true_type {};
-template <> struct Parse3ary<float> : public std::true_type {};
-template <> struct Parse3ary<double> : public std::true_type {};
-
-template <typename T>
-bool Parse(const char* str, size_t n, T* dest);
-
-// Types for which the 4-ary Parse() function template has specializations.
-template <typename T> struct Parse4ary : public std::false_type {};
-template <> struct Parse4ary<long> : public std::true_type {};
-template <> struct Parse4ary<unsigned long> : public std::true_type {};
-template <> struct Parse4ary<short> : public std::true_type {};
-template <> struct Parse4ary<unsigned short> : public std::true_type {};
-template <> struct Parse4ary<int> : public std::true_type {};
-template <> struct Parse4ary<unsigned int> : public std::true_type {};
-template <> struct Parse4ary<long long> : public std::true_type {};
-template <> struct Parse4ary<unsigned long long> : public std::true_type {};
-
-template <typename T>
-bool Parse(const char* str, size_t n, T* dest, int radix);
-
-}  // namespace re2_internal
-
-class RE2::Arg {
- private:
-  template <typename T>
-  using CanParse3ary = typename std::enable_if<
-      re2_internal::Parse3ary<T>::value,
-      int>::type;
-
-  template <typename T>
-  using CanParse4ary = typename std::enable_if<
-      re2_internal::Parse4ary<T>::value,
-      int>::type;
-
-#if !defined(_MSC_VER)
-  template <typename T>
-  using CanParseFrom = typename std::enable_if<
-      std::is_member_function_pointer<
-          decltype(static_cast<bool (T::*)(const char*, size_t)>(
-              &T::ParseFrom))>::value,
-      int>::type;
-#endif
-
- public:
-  Arg() : Arg(nullptr) {}
-  Arg(std::nullptr_t ptr) : arg_(ptr), parser_(DoNothing) {}
-
-  template <typename T, CanParse3ary<T> = 0>
-  Arg(T* ptr) : arg_(ptr), parser_(DoParse3ary<T>) {}
-
-  template <typename T, CanParse4ary<T> = 0>
-  Arg(T* ptr) : arg_(ptr), parser_(DoParse4ary<T>) {}
-
-#if !defined(_MSC_VER)
-  template <typename T, CanParseFrom<T> = 0>
-  Arg(T* ptr) : arg_(ptr), parser_(DoParseFrom<T>) {}
-#endif
-
-  typedef bool (*Parser)(const char* str, size_t n, void* dest);
-
-  template <typename T>
-  Arg(T* ptr, Parser parser) : arg_(ptr), parser_(parser) {}
-
-  bool Parse(const char* str, size_t n) const {
-    return (*parser_)(str, n, arg_);
-  }
-
- private:
-  static bool DoNothing(const char* /*str*/, size_t /*n*/, void* /*dest*/) {
-    return true;
-  }
-
-  template <typename T>
-  static bool DoParse3ary(const char* str, size_t n, void* dest) {
-    return re2_internal::Parse(str, n, reinterpret_cast<T*>(dest));
-  }
-
-  template <typename T>
-  static bool DoParse4ary(const char* str, size_t n, void* dest) {
-    return re2_internal::Parse(str, n, reinterpret_cast<T*>(dest), 10);
-  }
-
-#if !defined(_MSC_VER)
-  template <typename T>
-  static bool DoParseFrom(const char* str, size_t n, void* dest) {
-    if (dest == NULL) return true;
-    return reinterpret_cast<T*>(dest)->ParseFrom(str, n);
-  }
-#endif
-
-  void*         arg_;
-  Parser        parser_;
-};
-
-template <typename T>
-inline RE2::Arg RE2::CRadix(T* ptr) {
-  return RE2::Arg(ptr, [](const char* str, size_t n, void* dest) -> bool {
-    return re2_internal::Parse(str, n, reinterpret_cast<T*>(dest), 0);
-  });
-}
-
-template <typename T>
-inline RE2::Arg RE2::Hex(T* ptr) {
-  return RE2::Arg(ptr, [](const char* str, size_t n, void* dest) -> bool {
-    return re2_internal::Parse(str, n, reinterpret_cast<T*>(dest), 16);
-  });
-}
-
-template <typename T>
-inline RE2::Arg RE2::Octal(T* ptr) {
-  return RE2::Arg(ptr, [](const char* str, size_t n, void* dest) -> bool {
-    return re2_internal::Parse(str, n, reinterpret_cast<T*>(dest), 8);
-  });
-}
-
-#ifndef SWIG
-// Silence warnings about missing initializers for members of LazyRE2.
-#if !defined(__clang__) && defined(__GNUC__) && __GNUC__ >= 6
-#pragma GCC diagnostic ignored "-Wmissing-field-initializers"
-#endif
-
-// Helper for writing global or static RE2s safely.
-// Write
-//     static LazyRE2 re = {".*"};
-// and then use *re instead of writing
-//     static RE2 re(".*");
-// The former is more careful about multithreaded
-// situations than the latter.
-//
-// N.B. This class never deletes the RE2 object that
-// it constructs: that's a feature, so that it can be used
-// for global and function static variables.
-class LazyRE2 {
- private:
-  struct NoArg {};
-
- public:
-  typedef RE2 element_type;  // support std::pointer_traits
-
-  // Constructor omitted to preserve braced initialization in C++98.
-
-  // Pretend to be a pointer to Type (never NULL due to on-demand creation):
-  RE2& operator*() const { return *get(); }
-  RE2* operator->() const { return get(); }
-
-  // Named accessor/initializer:
-  RE2* get() const {
-    std::call_once(once_, &LazyRE2::Init, this);
-    return ptr_;
-  }
-
-  // All data fields must be public to support {"foo"} initialization.
-  const char* pattern_;
-  RE2::CannedOptions options_;
-  NoArg barrier_against_excess_initializers_;
-
-  mutable RE2* ptr_;
-  mutable std::once_flag once_;
-
- private:
-  static void Init(const LazyRE2* lazy_re2) {
-    lazy_re2->ptr_ = new RE2(lazy_re2->pattern_, lazy_re2->options_);
-  }
-
-  void operator=(const LazyRE2&);  // disallowed
-};
-#endif
-
-namespace hooks {
-
-// Most platforms support thread_local. Older versions of iOS don't support
-// thread_local, but for the sake of brevity, we lump together all versions
-// of Apple platforms that aren't macOS. If an iOS application really needs
-// the context pointee someday, we can get more specific then...
-//
-// As per https://github.com/google/re2/issues/325, thread_local support in
-// MinGW seems to be buggy. (FWIW, Abseil folks also avoid it.)
-#define RE2_HAVE_THREAD_LOCAL
-#if (defined(__APPLE__) && !TARGET_OS_OSX) || defined(__MINGW32__)
-#undef RE2_HAVE_THREAD_LOCAL
-#endif
-
-// A hook must not make any assumptions regarding the lifetime of the context
-// pointee beyond the current invocation of the hook. Pointers and references
-// obtained via the context pointee should be considered invalidated when the
-// hook returns. Hence, any data about the context pointee (e.g. its pattern)
-// would have to be copied in order for it to be kept for an indefinite time.
-//
-// A hook must not use RE2 for matching. Control flow reentering RE2::Match()
-// could result in infinite mutual recursion. To discourage that possibility,
-// RE2 will not maintain the context pointer correctly when used in that way.
-#ifdef RE2_HAVE_THREAD_LOCAL
-extern thread_local const RE2* context;
-#endif
-
-struct DFAStateCacheReset {
-  int64_t state_budget;
-  size_t state_cache_size;
-};
-
-struct DFASearchFailure {
-  // Nothing yet...
-};
-
-#define DECLARE_HOOK(type)                  \
-  using type##Callback = void(const type&); \
-  void Set##type##Hook(type##Callback* cb); \
-  type##Callback* Get##type##Hook();
-
-DECLARE_HOOK(DFAStateCacheReset)
-DECLARE_HOOK(DFASearchFailure)
-
-#undef DECLARE_HOOK
-
-}  // namespace hooks
-
-}  // namespace re2
-
-using re2::RE2;
-using re2::LazyRE2;
-
-#endif  // RE2_RE2_H_