grpc 1.45.0-x86_64-linux → 1.47.0-x86_64-linux

data/third_party/abseil-cpp/absl/strings/internal/cord_rep_btree_reader.h

@@ -0,0 +1,211 @@
+// Copyright 2021 The Abseil Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef ABSL_STRINGS_INTERNAL_CORD_REP_BTREE_READER_H_
+#define ABSL_STRINGS_INTERNAL_CORD_REP_BTREE_READER_H_
+
+#include <cassert>
+
+#include "absl/base/config.h"
+#include "absl/strings/internal/cord_internal.h"
+#include "absl/strings/internal/cord_rep_btree.h"
+#include "absl/strings/internal/cord_rep_btree_navigator.h"
+#include "absl/strings/internal/cord_rep_flat.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace cord_internal {
+
+// CordRepBtreeReader implements logic to iterate over cord btrees.
+// References to the underlying data are returned as absl::string_view values.
+// The most typical use case is a forward only iteration over tree data.
+// The class also provides `Skip()`, `Seek()` and `Read()` methods similar to
+// CordRepBtreeNavigator that allow more advanced navigation.
+//
+// Example: iterate over all data inside a cord btree:
+//
+//   CordRepBtreeReader reader;
+//   for (string_view sv = reader.Init(tree); !sv.Empty(); sv = sv.Next()) {
+//     DoSomethingWithDataIn(sv);
+//   }
+//
+// All navigation methods always return the next 'chunk' of data. The class
+// assumes that all data is directly 'consumed' by the caller. For example:
+// invoking `Skip()` will skip the desired number of bytes, and directly
+// read and return the next chunk of data directly after the skipped bytes.
+//
+// Example: iterate over all data inside a btree skipping the first 100 bytes:
+//
+//   CordRepBtreeReader reader;
+//   absl::string_view sv = reader.Init(tree);
+//   if (sv.length() > 100) {
+//     sv.RemovePrefix(100);
+//   } else {
+//     sv = reader.Skip(100 - sv.length());
+//   }
+//   while (!sv.empty()) {
+//     DoSomethingWithDataIn(sv);
+//     absl::string_view sv = reader.Next();
+//   }
+//
+// It is important to notice that `remaining` is based on the end position of
+// the last data edge returned to the caller, not the cumulative data returned
+// to the caller which can be less in cases of skipping or seeking over data.
+//
+// For example, consider a cord btree with five data edges: "abc", "def", "ghi",
+// "jkl" and "mno":
+//
+//   absl::string_view sv;
+//   CordRepBtreeReader reader;
+//
+//   sv = reader.Init(tree); // sv = "abc", remaining = 12
+//   sv = reader.Skip(4);    // sv = "hi",  remaining = 6
+//   sv = reader.Skip(2);    // sv = "l",   remaining = 3
+//   sv = reader.Next();     // sv = "mno", remaining = 0
+//   sv = reader.Seek(1);    // sv = "bc", remaining = 12
+//
+class CordRepBtreeReader {
+ public:
+  using ReadResult = CordRepBtreeNavigator::ReadResult;
+  using Position = CordRepBtreeNavigator::Position;
+
+  // Returns true if this instance is not empty.
+  explicit operator bool() const { return navigator_.btree() != nullptr; }
+
+  // Returns the tree referenced by this instance or nullptr if empty.
+  CordRepBtree* btree() const { return navigator_.btree(); }
+
+  // Returns the current data edge inside the referenced btree.
+  // Requires that the current instance is not empty.
+  CordRep* node() const { return navigator_.Current(); }
+
+  // Returns the length of the referenced tree.
+  // Requires that the current instance is not empty.
+  size_t length() const;
+
+  // Returns the number of remaining bytes available for iteration, which is the
+  // number of bytes directly following the end of the last chunk returned.
+  // This value will be zero if we iterated over the last edge in the bound
+  // tree, in which case any call to Next() or Skip() will return an empty
+  // string_view reflecting the EOF state.
+  // Note that a call to `Seek()` resets `remaining` to a value based on the
+  // end position of the chunk returned by that call.
+  size_t remaining() const { return remaining_; }
+
+  // Resets this instance to an empty value.
+  void Reset() { navigator_.Reset(); }
+
+  // Initializes this instance with `tree`. `tree` must not be null.
+  // Returns a reference to the first data edge of the provided tree.
+  absl::string_view Init(CordRepBtree* tree);
+
+  // Navigates to and returns the next data edge of the referenced tree.
+  // Returns an empty string_view if an attempt is made to read beyond the end
+  // of the tree, i.e.: if `remaining()` is zero indicating an EOF condition.
+  // Requires that the current instance is not empty.
+  absl::string_view Next();
+
+  // Skips the provided amount of bytes and returns a reference to the data
+  // directly following the skipped bytes.
+  absl::string_view Skip(size_t skip);
+
+  // Reads `n` bytes into `tree`.
+  // If `chunk_size` is zero, starts reading at the next data edge. If
+  // `chunk_size` is non zero, the read starts at the last `chunk_size` bytes of
+  // the last returned data edge. Effectively, this means that the read starts
+  // at offset `consumed() - chunk_size`.
+  // Requires that `chunk_size` is less than or equal to the length of the
+  // last returned data edge. The purpose of `chunk_size` is to simplify code
+  // partially consuming a returned chunk and wanting to include the remaining
+  // bytes in the Read call. For example, the below code will read 1000 bytes of
+  // data into a cord tree if the first chunk starts with "big:":
+  //
+  //   CordRepBtreeReader reader;
+  //   absl::string_view sv = reader.Init(tree);
+  //   if (absl::StartsWith(sv, "big:")) {
+  //     CordRepBtree tree;
+  //     sv = reader.Read(1000, sv.size() - 4 /* "big:" */, &tree);
+  //   }
+  //
+  // This method will return an empty string view if all remaining data was
+  // read. If `n` exceeded the amount of remaining data this function will
+  // return an empty string view and `tree` will be set to nullptr.
+  // In both cases, `consumed` will be set to `length`.
+  absl::string_view Read(size_t n, size_t chunk_size, CordRep*& tree);
+
+  // Navigates to the chunk at offset `offset`.
+  // Returns a reference into the navigated to chunk, adjusted for the relative
+  // position of `offset` into that chunk. For example, calling `Seek(13)` on a
+  // cord tree containing 2 chunks of 10 and 20 bytes respectively will return
+  // a string view into the second chunk starting at offset 3 with a size of 17.
+  // Returns an empty string view if `offset` is equal to or greater than the
+  // length of the referenced tree.
+  absl::string_view Seek(size_t offset);
+
+ private:
+  size_t remaining_ = 0;
+  CordRepBtreeNavigator navigator_;
+};
+
+inline size_t CordRepBtreeReader::length() const {
+  assert(btree() != nullptr);
+  return btree()->length;
+}
+
+inline absl::string_view CordRepBtreeReader::Init(CordRepBtree* tree) {
+  assert(tree != nullptr);
+  const CordRep* edge = navigator_.InitFirst(tree);
+  remaining_ = tree->length - edge->length;
+  return CordRepBtree::EdgeData(edge);
+}
+
+inline absl::string_view CordRepBtreeReader::Next() {
+  if (remaining_ == 0) return {};
+  const CordRep* edge = navigator_.Next();
+  assert(edge != nullptr);
+  remaining_ -= edge->length;
+  return CordRepBtree::EdgeData(edge);
+}
+
+inline absl::string_view CordRepBtreeReader::Skip(size_t skip) {
+  // As we are always positioned on the last 'consumed' edge, we
+  // need to skip the current edge as well as `skip`.
+  const size_t edge_length = navigator_.Current()->length;
+  CordRepBtreeNavigator::Position pos = navigator_.Skip(skip + edge_length);
+  if (ABSL_PREDICT_FALSE(pos.edge == nullptr)) {
+    remaining_ = 0;
+    return {};
+  }
+  // The combined length of all edges skipped before `pos.edge` is `skip -
+  // pos.offset`, all of which are 'consumed', as well as the current edge.
+  remaining_ -= skip - pos.offset + pos.edge->length;
+  return CordRepBtree::EdgeData(pos.edge).substr(pos.offset);
+}
+
+inline absl::string_view CordRepBtreeReader::Seek(size_t offset) {
+  const CordRepBtreeNavigator::Position pos = navigator_.Seek(offset);
+  if (ABSL_PREDICT_FALSE(pos.edge == nullptr)) {
+    remaining_ = 0;
+    return {};
+  }
+  absl::string_view chunk = CordRepBtree::EdgeData(pos.edge).substr(pos.offset);
+  remaining_ = length() - offset - chunk.length();
+  return chunk;
+}
+
+}  // namespace cord_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_INTERNAL_CORD_REP_BTREE_READER_H_

data/third_party/abseil-cpp/absl/strings/internal/cord_rep_consume.cc

@@ -0,0 +1,129 @@
+// Copyright 2021 The Abseil Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "absl/strings/internal/cord_rep_consume.h"
+
+#include <array>
+#include <utility>
+
+#include "absl/container/inlined_vector.h"
+#include "absl/functional/function_ref.h"
+#include "absl/strings/internal/cord_internal.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace cord_internal {
+
+namespace {
+
+// Unrefs the provided `substring`, and returns `substring->child`
+// Adds or assumes a reference on `substring->child`
+CordRep* ClipSubstring(CordRepSubstring* substring) {
+  CordRep* child = substring->child;
+  if (substring->refcount.IsOne()) {
+    delete substring;
+  } else {
+    CordRep::Ref(child);
+    CordRep::Unref(substring);
+  }
+  return child;
+}
+
+// Unrefs the provided `concat`, and returns `{concat->left, concat->right}`
+// Adds or assumes a reference on `concat->left` and `concat->right`.
+// Returns an array of 2 elements containing the left and right nodes.
+std::array<CordRep*, 2> ClipConcat(CordRepConcat* concat) {
+  std::array<CordRep*, 2> result{concat->left, concat->right};
+  if (concat->refcount.IsOne()) {
+    delete concat;
+  } else {
+    CordRep::Ref(result[0]);
+    CordRep::Ref(result[1]);
+    CordRep::Unref(concat);
+  }
+  return result;
+}
+
+void Consume(bool forward, CordRep* rep, ConsumeFn consume_fn) {
+  size_t offset = 0;
+  size_t length = rep->length;
+  struct Entry {
+    CordRep* rep;
+    size_t offset;
+    size_t length;
+  };
+  absl::InlinedVector<Entry, 40> stack;
+
+  for (;;) {
+    if (rep->tag == CONCAT) {
+      std::array<CordRep*, 2> res = ClipConcat(rep->concat());
+      CordRep* left = res[0];
+      CordRep* right = res[1];
+
+      if (left->length <= offset) {
+        // Don't need left node
+        offset -= left->length;
+        CordRep::Unref(left);
+        rep = right;
+        continue;
+      }
+
+      size_t length_left = left->length - offset;
+      if (length_left >= length) {
+        // Don't need right node
+        CordRep::Unref(right);
+        rep = left;
+        continue;
+      }
+
+      // Need both nodes
+      size_t length_right = length - length_left;
+      if (forward) {
+        stack.push_back({right, 0, length_right});
+        rep = left;
+        length = length_left;
+      } else {
+        stack.push_back({left, offset, length_left});
+        rep = right;
+        offset = 0;
+        length = length_right;
+      }
+    } else if (rep->tag == SUBSTRING) {
+      offset += rep->substring()->start;
+      rep = ClipSubstring(rep->substring());
+    } else {
+      consume_fn(rep, offset, length);
+      if (stack.empty()) return;
+
+      rep = stack.back().rep;
+      offset = stack.back().offset;
+      length = stack.back().length;
+      stack.pop_back();
+    }
+  }
+}
+
+}  // namespace
+
+void Consume(CordRep* rep, ConsumeFn consume_fn) {
+  return Consume(true, rep, std::move(consume_fn));
+}
+
+void ReverseConsume(CordRep* rep, ConsumeFn consume_fn) {
+  return Consume(false, rep, std::move(consume_fn));
+}
+
+}  // namespace cord_internal
+ABSL_NAMESPACE_END
+}  // namespace absl

data/third_party/abseil-cpp/absl/strings/internal/cord_rep_consume.h

@@ -0,0 +1,50 @@
+// Copyright 2021 The Abseil Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef ABSL_STRINGS_INTERNAL_CORD_REP_CONSUME_H_
+#define ABSL_STRINGS_INTERNAL_CORD_REP_CONSUME_H_
+
+#include <functional>
+
+#include "absl/functional/function_ref.h"
+#include "absl/strings/internal/cord_internal.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace cord_internal {
+
+// Functor for the Consume() and ReverseConsume() functions:
+//   void ConsumeFunc(CordRep* rep, size_t offset, size_t length);
+// See the Consume() and ReverseConsume() function comments for documentation.
+using ConsumeFn = FunctionRef<void(CordRep*, size_t, size_t)>;
+
+// Consume() and ReverseConsume() consume CONCAT based trees and invoke the
+// provided functor with the contained nodes in the proper forward or reverse
+// order, which is used to convert CONCAT trees into other tree or cord data.
+// All CONCAT and SUBSTRING nodes are processed internally. The 'offset`
+// parameter of the functor is non-zero for any nodes below SUBSTRING nodes.
+// It's up to the caller to form these back into SUBSTRING nodes or otherwise
+// store offset / prefix information. These functions are intended to be used
+// only for migration / transitional code where due to factors such as ODR
+// violations, we can not 100% guarantee that all code respects 'new format'
+// settings and flags, so we need to be able to parse old data on the fly until
+// all old code is deprecated / no longer the default format.
+void Consume(CordRep* rep, ConsumeFn consume_fn);
+void ReverseConsume(CordRep* rep, ConsumeFn consume_fn);
+
+}  // namespace cord_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_INTERNAL_CORD_REP_CONSUME_H_

data/third_party/abseil-cpp/absl/strings/internal/cord_rep_flat.h

@@ -0,0 +1,146 @@
+// Copyright 2020 The Abseil Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef ABSL_STRINGS_INTERNAL_CORD_REP_FLAT_H_
+#define ABSL_STRINGS_INTERNAL_CORD_REP_FLAT_H_
+
+#include <cassert>
+#include <cstddef>
+#include <cstdint>
+#include <memory>
+
+#include "absl/strings/internal/cord_internal.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace cord_internal {
+
+// Note: all constants below are never ODR used and internal to cord, we define
+// these as static constexpr to avoid 'in struct' definition and usage clutter.
+
+// Largest and smallest flat node lengths we are willing to allocate
+// Flat allocation size is stored in tag, which currently can encode sizes up
+// to 4K, encoded as multiple of either 8 or 32 bytes.
+// If we allow for larger sizes, we need to change this to 8/64, 16/128, etc.
+// kMinFlatSize is bounded by tag needing to be at least FLAT * 8 bytes, and
+// ideally a 'nice' size aligning with allocation and cacheline sizes like 32.
+// kMaxFlatSize is bounded by the size resulting in a computed tag no greater
+// than MAX_FLAT_TAG. MAX_FLAT_TAG provides for additional 'high' tag values.
+static constexpr size_t kFlatOverhead = offsetof(CordRep, storage);
+static constexpr size_t kMinFlatSize = 32;
+static constexpr size_t kMaxFlatSize = 4096;
+static constexpr size_t kMaxFlatLength = kMaxFlatSize - kFlatOverhead;
+static constexpr size_t kMinFlatLength = kMinFlatSize - kFlatOverhead;
+
+constexpr uint8_t AllocatedSizeToTagUnchecked(size_t size) {
+  return static_cast<uint8_t>((size <= 1024) ? size / 8 + 1
+                                             : 129 + size / 32 - 1024 / 32);
+}
+
+static_assert(kMinFlatSize / 8 + 1 >= FLAT, "");
+static_assert(AllocatedSizeToTagUnchecked(kMaxFlatSize) <= MAX_FLAT_TAG, "");
+
+// Helper functions for rounded div, and rounding to exact sizes.
+constexpr size_t DivUp(size_t n, size_t m) { return (n + m - 1) / m; }
+constexpr size_t RoundUp(size_t n, size_t m) { return DivUp(n, m) * m; }
+
+// Returns the size to the nearest equal or larger value that can be
+// expressed exactly as a tag value.
+inline size_t RoundUpForTag(size_t size) {
+  return RoundUp(size, (size <= 1024) ? 8 : 32);
+}
+
+// Converts the allocated size to a tag, rounding down if the size
+// does not exactly match a 'tag expressible' size value. The result is
+// undefined if the size exceeds the maximum size that can be encoded in
+// a tag, i.e., if size is larger than TagToAllocatedSize(<max tag>).
+inline uint8_t AllocatedSizeToTag(size_t size) {
+  const uint8_t tag = AllocatedSizeToTagUnchecked(size);
+  assert(tag <= MAX_FLAT_TAG);
+  return tag;
+}
+
+// Converts the provided tag to the corresponding allocated size
+constexpr size_t TagToAllocatedSize(uint8_t tag) {
+  return (tag <= 129) ? ((tag - 1) * 8) : (1024 + (tag - 129) * 32);
+}
+
+// Converts the provided tag to the corresponding available data length
+constexpr size_t TagToLength(uint8_t tag) {
+  return TagToAllocatedSize(tag) - kFlatOverhead;
+}
+
+// Enforce that kMaxFlatSize maps to a well-known exact tag value.
+static_assert(TagToAllocatedSize(225) == kMaxFlatSize, "Bad tag logic");
+
+struct CordRepFlat : public CordRep {
+  // Creates a new flat node.
+  static CordRepFlat* New(size_t len) {
+    if (len <= kMinFlatLength) {
+      len = kMinFlatLength;
+    } else if (len > kMaxFlatLength) {
+      len = kMaxFlatLength;
+    }
+
+    // Round size up so it matches a size we can exactly express in a tag.
+    const size_t size = RoundUpForTag(len + kFlatOverhead);
+    void* const raw_rep = ::operator new(size);
+    CordRepFlat* rep = new (raw_rep) CordRepFlat();
+    rep->tag = AllocatedSizeToTag(size);
+    return rep;
+  }
+
+  // Deletes a CordRepFlat instance created previously through a call to New().
+  // Flat CordReps are allocated and constructed with raw ::operator new and
+  // placement new, and must be destructed and deallocated accordingly.
+  static void Delete(CordRep*rep) {
+    assert(rep->tag >= FLAT && rep->tag <= MAX_FLAT_TAG);
+
+#if defined(__cpp_sized_deallocation)
+    size_t size = TagToAllocatedSize(rep->tag);
+    rep->~CordRep();
+    ::operator delete(rep, size);
+#else
+    rep->~CordRep();
+    ::operator delete(rep);
+#endif
+  }
+
+  // Returns a pointer to the data inside this flat rep.
+  char* Data() { return reinterpret_cast<char*>(storage); }
+  const char* Data() const { return reinterpret_cast<const char*>(storage); }
+
+  // Returns the maximum capacity (payload size) of this instance.
+  size_t Capacity() const { return TagToLength(tag); }
+
+  // Returns the allocated size (payload + overhead) of this instance.
+  size_t AllocatedSize() const { return TagToAllocatedSize(tag); }
+};
+
+// Now that CordRepFlat is defined, we can define CordRep's helper casts:
+inline CordRepFlat* CordRep::flat() {
+  assert(tag >= FLAT && tag <= MAX_FLAT_TAG);
+  return reinterpret_cast<CordRepFlat*>(this);
+}
+
+inline const CordRepFlat* CordRep::flat() const {
+  assert(tag >= FLAT && tag <= MAX_FLAT_TAG);
+  return reinterpret_cast<const CordRepFlat*>(this);
+}
+
+}  // namespace cord_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_INTERNAL_CORD_REP_FLAT_H_