grpc-z 1.11.1

data/third_party/boringssl/crypto/cpu-arm.c

@@ -0,0 +1,38 @@
+/* Copyright (c) 2014, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#include <openssl/cpu.h>
+
+#if (defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)) && \
+    !defined(OPENSSL_STATIC_ARMCAP)
+
+#include <openssl/arm_arch.h>
+
+
+extern uint32_t OPENSSL_armcap_P;
+
+char CRYPTO_is_NEON_capable_at_runtime(void) {
+  return (OPENSSL_armcap_P & ARMV7_NEON) != 0;
+}
+
+int CRYPTO_is_ARMv8_AES_capable(void) {
+  return (OPENSSL_armcap_P & ARMV8_AES) != 0;
+}
+
+int CRYPTO_is_ARMv8_PMULL_capable(void) {
+  return (OPENSSL_armcap_P & ARMV8_PMULL) != 0;
+}
+
+#endif  /* (defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)) &&
+           !defined(OPENSSL_STATIC_ARMCAP) */

data/third_party/boringssl/crypto/cpu-intel.c

@@ -0,0 +1,288 @@
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#if !defined(__STDC_FORMAT_MACROS)
+#define __STDC_FORMAT_MACROS
+#endif
+
+#include <openssl/cpu.h>
+
+
+#if !defined(OPENSSL_NO_ASM) && (defined(OPENSSL_X86) || defined(OPENSSL_X86_64))
+
+#include <inttypes.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined(_MSC_VER)
+OPENSSL_MSVC_PRAGMA(warning(push, 3))
+#include <immintrin.h>
+#include <intrin.h>
+OPENSSL_MSVC_PRAGMA(warning(pop))
+#endif
+
+#include "internal.h"
+
+
+// OPENSSL_cpuid runs the cpuid instruction. |leaf| is passed in as EAX and ECX
+// is set to zero. It writes EAX, EBX, ECX, and EDX to |*out_eax| through
+// |*out_edx|.
+static void OPENSSL_cpuid(uint32_t *out_eax, uint32_t *out_ebx,
+                          uint32_t *out_ecx, uint32_t *out_edx, uint32_t leaf) {
+#if defined(_MSC_VER)
+  int tmp[4];
+  __cpuid(tmp, (int)leaf);
+  *out_eax = (uint32_t)tmp[0];
+  *out_ebx = (uint32_t)tmp[1];
+  *out_ecx = (uint32_t)tmp[2];
+  *out_edx = (uint32_t)tmp[3];
+#elif defined(__pic__) && defined(OPENSSL_32_BIT)
+  // Inline assembly may not clobber the PIC register. For 32-bit, this is EBX.
+  // See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=47602.
+  __asm__ volatile (
+    "xor %%ecx, %%ecx\n"
+    "mov %%ebx, %%edi\n"
+    "cpuid\n"
+    "xchg %%edi, %%ebx\n"
+    : "=a"(*out_eax), "=D"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
+    : "a"(leaf)
+  );
+#else
+  __asm__ volatile (
+    "xor %%ecx, %%ecx\n"
+    "cpuid\n"
+    : "=a"(*out_eax), "=b"(*out_ebx), "=c"(*out_ecx), "=d"(*out_edx)
+    : "a"(leaf)
+  );
+#endif
+}
+
+// OPENSSL_xgetbv returns the value of an Intel Extended Control Register (XCR).
+// Currently only XCR0 is defined by Intel so |xcr| should always be zero.
+static uint64_t OPENSSL_xgetbv(uint32_t xcr) {
+#if defined(_MSC_VER)
+  return (uint64_t)_xgetbv(xcr);
+#else
+  uint32_t eax, edx;
+  __asm__ volatile ("xgetbv" : "=a"(eax), "=d"(edx) : "c"(xcr));
+  return (((uint64_t)edx) << 32) | eax;
+#endif
+}
+
+// handle_cpu_env applies the value from |in| to the CPUID values in |out[0]|
+// and |out[1]|. See the comment in |OPENSSL_cpuid_setup| about this.
+static void handle_cpu_env(uint32_t *out, const char *in) {
+  const int invert = in[0] == '~';
+  uint64_t v;
+
+  if (!sscanf(in + invert, "%" PRIu64, &v)) {
+    return;
+  }
+
+  if (invert) {
+    out[0] &= ~v;
+    out[1] &= ~(v >> 32);
+  } else {
+    out[0] = v;
+    out[1] = v >> 32;
+  }
+}
+
+void OPENSSL_cpuid_setup(void) {
+  // Determine the vendor and maximum input value.
+  uint32_t eax, ebx, ecx, edx;
+  OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0);
+
+  uint32_t num_ids = eax;
+
+  int is_intel = ebx == 0x756e6547 /* Genu */ &&
+                 edx == 0x49656e69 /* ineI */ &&
+                 ecx == 0x6c65746e /* ntel */;
+  int is_amd = ebx == 0x68747541 /* Auth */ &&
+               edx == 0x69746e65 /* enti */ &&
+               ecx == 0x444d4163 /* cAMD */;
+
+  int has_amd_xop = 0;
+  if (is_amd) {
+    // AMD-specific logic.
+    // See http://developer.amd.com/wordpress/media/2012/10/254811.pdf
+    OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000000);
+    uint32_t num_extended_ids = eax;
+    if (num_extended_ids >= 0x80000001) {
+      OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 0x80000001);
+      if (ecx & (1u << 11)) {
+        has_amd_xop = 1;
+      }
+    }
+  }
+
+  uint32_t extended_features = 0;
+  if (num_ids >= 7) {
+    OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 7);
+    extended_features = ebx;
+  }
+
+  // Determine the number of cores sharing an L1 data cache to adjust the
+  // hyper-threading bit.
+  uint32_t cores_per_cache = 0;
+  if (is_amd) {
+    // AMD CPUs never share an L1 data cache between threads but do set the HTT
+    // bit on multi-core CPUs.
+    cores_per_cache = 1;
+  } else if (num_ids >= 4) {
+    // TODO(davidben): The Intel manual says this CPUID leaf enumerates all
+    // caches using ECX and doesn't say which is first. Does this matter?
+    OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 4);
+    cores_per_cache = 1 + ((eax >> 14) & 0xfff);
+  }
+
+  OPENSSL_cpuid(&eax, &ebx, &ecx, &edx, 1);
+
+  // Adjust the hyper-threading bit.
+  if (edx & (1u << 28)) {
+    uint32_t num_logical_cores = (ebx >> 16) & 0xff;
+    if (cores_per_cache == 1 || num_logical_cores <= 1) {
+      edx &= ~(1u << 28);
+    }
+  }
+
+  // Reserved bit #20 was historically repurposed to control the in-memory
+  // representation of RC4 state. Always set it to zero.
+  edx &= ~(1u << 20);
+
+  // Reserved bit #30 is repurposed to signal an Intel CPU.
+  if (is_intel) {
+    edx |= (1u << 30);
+
+    // Clear the XSAVE bit on Knights Landing to mimic Silvermont. This enables
+    // some Silvermont-specific codepaths which perform better. See OpenSSL
+    // commit 64d92d74985ebb3d0be58a9718f9e080a14a8e7f.
+    if ((eax & 0x0fff0ff0) == 0x00050670 /* Knights Landing */ ||
+        (eax & 0x0fff0ff0) == 0x00080650 /* Knights Mill (per SDE) */) {
+      ecx &= ~(1u << 26);
+    }
+  } else {
+    edx &= ~(1u << 30);
+  }
+
+  // The SDBG bit is repurposed to denote AMD XOP support.
+  if (has_amd_xop) {
+    ecx |= (1u << 11);
+  } else {
+    ecx &= ~(1u << 11);
+  }
+
+  uint64_t xcr0 = 0;
+  if (ecx & (1u << 27)) {
+    // XCR0 may only be queried if the OSXSAVE bit is set.
+    xcr0 = OPENSSL_xgetbv(0);
+  }
+  // See Intel manual, volume 1, section 14.3.
+  if ((xcr0 & 6) != 6) {
+    // YMM registers cannot be used.
+    ecx &= ~(1u << 28);  // AVX
+    ecx &= ~(1u << 12);  // FMA
+    ecx &= ~(1u << 11);  // AMD XOP
+    // Clear AVX2 and AVX512* bits.
+    //
+    // TODO(davidben): Should bits 17 and 26-28 also be cleared? Upstream
+    // doesn't clear those.
+    extended_features &=
+        ~((1u << 5) | (1u << 16) | (1u << 21) | (1u << 30) | (1u << 31));
+  }
+  // See Intel manual, volume 1, section 15.2.
+  if ((xcr0 & 0xe6) != 0xe6) {
+    // Clear AVX512F. Note we don't touch other AVX512 extensions because they
+    // can be used with YMM.
+    extended_features &= ~(1u << 16);
+  }
+
+  // Disable ADX instructions on Knights Landing. See OpenSSL commit
+  // 64d92d74985ebb3d0be58a9718f9e080a14a8e7f.
+  if ((ecx & (1u << 26)) == 0) {
+    extended_features &= ~(1u << 19);
+  }
+
+  OPENSSL_ia32cap_P[0] = edx;
+  OPENSSL_ia32cap_P[1] = ecx;
+  OPENSSL_ia32cap_P[2] = extended_features;
+  OPENSSL_ia32cap_P[3] = 0;
+
+  const char *env1, *env2;
+  env1 = getenv("OPENSSL_ia32cap");
+  if (env1 == NULL) {
+    return;
+  }
+
+  // OPENSSL_ia32cap can contain zero, one or two values, separated with a ':'.
+  // Each value is a 64-bit, unsigned value which may start with "0x" to
+  // indicate a hex value. Prior to the 64-bit value, a '~' may be given.
+  //
+  // If '~' isn't present, then the value is taken as the result of the CPUID.
+  // Otherwise the value is inverted and ANDed with the probed CPUID result.
+  //
+  // The first value determines OPENSSL_ia32cap_P[0] and [1]. The second [2]
+  // and [3].
+
+  handle_cpu_env(&OPENSSL_ia32cap_P[0], env1);
+  env2 = strchr(env1, ':');
+  if (env2 != NULL) {
+    handle_cpu_env(&OPENSSL_ia32cap_P[2], env2 + 1);
+  }
+}
+
+#endif  // !OPENSSL_NO_ASM && (OPENSSL_X86 || OPENSSL_X86_64)

data/third_party/boringssl/crypto/cpu-ppc64le.c

@@ -0,0 +1,38 @@
+/* Copyright (c) 2016, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#include <openssl/cpu.h>
+
+#if defined(OPENSSL_PPC64LE)
+
+#include <sys/auxv.h>
+
+#include "internal.h"
+
+
+#if !defined(PPC_FEATURE2_HAS_VCRYPTO)
+// PPC_FEATURE2_HAS_VCRYPTO was taken from section 4.1.2.3 of the “OpenPOWER
+// ABI for Linux Supplement”.
+#define PPC_FEATURE2_HAS_VCRYPTO 0x02000000
+#endif
+
+void OPENSSL_cpuid_setup(void) {
+  OPENSSL_ppc64le_hwcap2 = getauxval(AT_HWCAP2);
+}
+
+int CRYPTO_is_PPC64LE_vcrypto_capable(void) {
+  return (OPENSSL_ppc64le_hwcap2 & PPC_FEATURE2_HAS_VCRYPTO) != 0;
+}
+
+#endif  // OPENSSL_PPC64LE

data/third_party/boringssl/crypto/crypto.c

@@ -0,0 +1,198 @@
+/* Copyright (c) 2014, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#include <openssl/crypto.h>
+
+#include <openssl/cpu.h>
+
+#include "internal.h"
+
+
+#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_STATIC_ARMCAP) && \
+    (defined(OPENSSL_X86) || defined(OPENSSL_X86_64) || \
+     defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64) || \
+     defined(OPENSSL_PPC64LE))
+// x86, x86_64, the ARMs and ppc64le need to record the result of a
+// cpuid/getauxval call for the asm to work correctly, unless compiled without
+// asm code.
+#define NEED_CPUID
+
+#else
+
+// Otherwise, don't emit a static initialiser.
+
+#if !defined(BORINGSSL_NO_STATIC_INITIALIZER)
+#define BORINGSSL_NO_STATIC_INITIALIZER
+#endif
+
+#endif  /* !OPENSSL_NO_ASM && (OPENSSL_X86 || OPENSSL_X86_64 ||
+                               OPENSSL_ARM || OPENSSL_AARCH64) */
+
+
+// Our assembly does not use the GOT to reference symbols, which means
+// references to visible symbols will often require a TEXTREL. This is
+// undesirable, so all assembly-referenced symbols should be hidden. CPU
+// capabilities are the only such symbols defined in C. Explicitly hide them,
+// rather than rely on being built with -fvisibility=hidden.
+#if defined(OPENSSL_WINDOWS)
+#define HIDDEN
+#else
+#define HIDDEN __attribute__((visibility("hidden")))
+#endif
+
+
+// The capability variables are defined in this file in order to work around a
+// linker bug. When linking with a .a, if no symbols in a .o are referenced
+// then the .o is discarded, even if it has constructor functions.
+//
+// This still means that any binaries that don't include some functionality
+// that tests the capability values will still skip the constructor but, so
+// far, the init constructor function only sets the capability variables.
+
+#if defined(OPENSSL_X86) || defined(OPENSSL_X86_64)
+
+// This value must be explicitly initialised to zero in order to work around a
+// bug in libtool or the linker on OS X.
+//
+// If not initialised then it becomes a "common symbol". When put into an
+// archive, linking on OS X will fail to resolve common symbols. By
+// initialising it to zero, it becomes a "data symbol", which isn't so
+// affected.
+HIDDEN uint32_t OPENSSL_ia32cap_P[4] = {0};
+
+#elif defined(OPENSSL_PPC64LE)
+
+HIDDEN unsigned long OPENSSL_ppc64le_hwcap2 = 0;
+
+#elif defined(OPENSSL_ARM) || defined(OPENSSL_AARCH64)
+
+#include <openssl/arm_arch.h>
+
+#if defined(OPENSSL_STATIC_ARMCAP)
+
+HIDDEN uint32_t OPENSSL_armcap_P =
+#if defined(OPENSSL_STATIC_ARMCAP_NEON) || defined(__ARM_NEON__)
+    ARMV7_NEON |
+#endif
+#if defined(OPENSSL_STATIC_ARMCAP_AES) || defined(__ARM_FEATURE_CRYPTO)
+    ARMV8_AES |
+#endif
+#if defined(OPENSSL_STATIC_ARMCAP_SHA1) || defined(__ARM_FEATURE_CRYPTO)
+    ARMV8_SHA1 |
+#endif
+#if defined(OPENSSL_STATIC_ARMCAP_SHA256) || defined(__ARM_FEATURE_CRYPTO)
+    ARMV8_SHA256 |
+#endif
+#if defined(OPENSSL_STATIC_ARMCAP_PMULL) || defined(__ARM_FEATURE_CRYPTO)
+    ARMV8_PMULL |
+#endif
+    0;
+
+#else
+HIDDEN uint32_t OPENSSL_armcap_P = 0;
+#endif
+
+#endif
+
+#if defined(BORINGSSL_FIPS)
+// In FIPS mode, the power-on self-test function calls |CRYPTO_library_init|
+// because we have to ensure that CPUID detection occurs first.
+#define BORINGSSL_NO_STATIC_INITIALIZER
+#endif
+
+#if defined(OPENSSL_WINDOWS) && !defined(BORINGSSL_NO_STATIC_INITIALIZER)
+#define OPENSSL_CDECL __cdecl
+#else
+#define OPENSSL_CDECL
+#endif
+
+#if defined(BORINGSSL_NO_STATIC_INITIALIZER)
+static CRYPTO_once_t once = CRYPTO_ONCE_INIT;
+#elif defined(_MSC_VER)
+#pragma section(".CRT$XCU", read)
+static void __cdecl do_library_init(void);
+__declspec(allocate(".CRT$XCU")) void(*library_init_constructor)(void) =
+    do_library_init;
+#else
+static void do_library_init(void) __attribute__ ((constructor));
+#endif
+
+// do_library_init is the actual initialization function. If
+// BORINGSSL_NO_STATIC_INITIALIZER isn't defined, this is set as a static
+// initializer. Otherwise, it is called by CRYPTO_library_init.
+static void OPENSSL_CDECL do_library_init(void) {
+ // WARNING: this function may only configure the capability variables. See the
+ // note above about the linker bug.
+#if defined(NEED_CPUID)
+  OPENSSL_cpuid_setup();
+#endif
+}
+
+void CRYPTO_library_init(void) {
+  // TODO(davidben): It would be tidier if this build knob could be replaced
+  // with an internal lazy-init mechanism that would handle things correctly
+  // in-library. https://crbug.com/542879
+#if defined(BORINGSSL_NO_STATIC_INITIALIZER)
+  CRYPTO_once(&once, do_library_init);
+#endif
+}
+
+int CRYPTO_is_confidential_build(void) {
+#if defined(BORINGSSL_CONFIDENTIAL)
+  return 1;
+#else
+  return 0;
+#endif
+}
+
+int CRYPTO_has_asm(void) {
+#if defined(OPENSSL_NO_ASM)
+  return 0;
+#else
+  return 1;
+#endif
+}
+
+const char *SSLeay_version(int unused) {
+  return "BoringSSL";
+}
+
+const char *OpenSSL_version(int unused) {
+  return "BoringSSL";
+}
+
+unsigned long SSLeay(void) {
+  return OPENSSL_VERSION_NUMBER;
+}
+
+unsigned long OpenSSL_version_num(void) {
+  return OPENSSL_VERSION_NUMBER;
+}
+
+int CRYPTO_malloc_init(void) {
+  return 1;
+}
+
+void ENGINE_load_builtin_engines(void) {}
+
+int ENGINE_register_all_complete(void) {
+  return 1;
+}
+
+void OPENSSL_load_builtin_modules(void) {}
+
+int OPENSSL_init_crypto(uint64_t opts, const OPENSSL_INIT_SETTINGS *settings) {
+  CRYPTO_library_init();
+  return 1;
+}