ffi 1.1.5 → 1.15.5

data/ext/ffi_c/libffi/src/tile/tile.S

@@ -0,0 +1,360 @@
+/* -----------------------------------------------------------------------
+   tile.S - Copyright (c) 2011 Tilera Corp.
+
+   Tilera TILEPro and TILE-Gx Foreign Function Interface
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+   NONINFRINGEMENT.  IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+   HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+   WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+   DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM
+#include <fficonfig.h>
+#include <ffi.h>
+
+/* Number of bytes in a register. */
+#define REG_SIZE FFI_SIZEOF_ARG
+
+/* Number of bytes in stack linkage area for backtracing.
+
+   A note about the ABI: on entry to a procedure, sp points to a stack
+   slot where it must spill the return address if it's not a leaf.
+   REG_SIZE bytes beyond that is a slot owned by the caller which
+   contains the sp value that the caller had when it was originally
+   entered (i.e. the caller's frame pointer). */
+#define LINKAGE_SIZE (2 * REG_SIZE)
+
+/* The first 10 registers are used to pass arguments and return values. */
+#define NUM_ARG_REGS 10
+
+#ifdef __tilegx__
+#define SW st
+#define LW ld
+#define BGZT bgtzt
+#else
+#define SW sw
+#define LW lw
+#define BGZT bgzt
+#endif
+
+
+/* void ffi_call_tile (int_reg_t reg_args[NUM_ARG_REGS],
+                       const int_reg_t *stack_args,
+                       unsigned long stack_args_bytes,
+                       void (*fnaddr)(void));
+
+        On entry, REG_ARGS contain the outgoing register values,
+        and STACK_ARGS contains STACK_ARG_BYTES of additional values
+        to be passed on the stack. If STACK_ARG_BYTES is zero, then
+        STACK_ARGS is ignored.
+
+        When the invoked function returns, the values of r0-r9 are
+        blindly stored back into REG_ARGS for the caller to examine. */
+
+        .section .text.ffi_call_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_call_tile
+        FFI_HIDDEN(ffi_call_tile)
+ffi_call_tile:
+
+/* Incoming arguments. */
+#define REG_ARGS                r0
+#define INCOMING_STACK_ARGS     r1
+#define STACK_ARG_BYTES         r2
+#define ORIG_FNADDR             r3
+
+/* Temporary values. */
+#define FRAME_SIZE              r10
+#define TMP                     r11
+#define TMP2                    r12
+#define OUTGOING_STACK_ARGS     r13
+#define REG_ADDR_PTR            r14
+#define RETURN_REG_ADDR         r15
+#define FNADDR                  r16
+
+        .cfi_startproc
+        {
+         /* Save return address. */
+         SW     sp, lr
+         .cfi_offset lr, 0
+         /* Prepare to spill incoming r52. */
+         addi   TMP, sp, -REG_SIZE
+         /* Increase frame size to have room to spill r52 and REG_ARGS.
+            The +7 is to round up mod 8. */
+         addi   FRAME_SIZE, STACK_ARG_BYTES, \
+                REG_SIZE + REG_SIZE + LINKAGE_SIZE + 7
+        }
+        {
+         /* Round stack frame size to a multiple of 8 to satisfy ABI. */
+         andi   FRAME_SIZE, FRAME_SIZE, -8
+         /* Compute where to spill REG_ARGS value. */
+         addi   TMP2, sp, -(REG_SIZE * 2)
+        }
+        {
+         /* Spill incoming r52. */
+         SW     TMP, r52
+         .cfi_offset r52, -REG_SIZE
+         /* Set up our frame pointer. */
+         move   r52, sp
+         .cfi_def_cfa_register r52
+         /* Push stack frame. */
+         sub    sp, sp, FRAME_SIZE
+        }
+        {
+         /* Prepare to set up stack linkage. */
+         addi   TMP, sp, REG_SIZE
+         /* Prepare to memcpy stack args. */
+         addi   OUTGOING_STACK_ARGS, sp, LINKAGE_SIZE
+         /* Save REG_ARGS which we will need after we call the subroutine. */
+         SW     TMP2, REG_ARGS
+        }
+        {
+         /* Set up linkage info to hold incoming stack pointer. */
+         SW     TMP, r52
+        }
+        {
+         /* Skip stack args memcpy if we don't have any stack args (common). */
+         blezt  STACK_ARG_BYTES, .Ldone_stack_args_memcpy
+        }
+
+.Lmemcpy_stack_args:
+        {
+         /* Load incoming argument from stack_args. */
+         LW     TMP, INCOMING_STACK_ARGS
+         addi   INCOMING_STACK_ARGS, INCOMING_STACK_ARGS, REG_SIZE
+        }
+        {
+         /* Store stack argument into outgoing stack argument area. */
+         SW     OUTGOING_STACK_ARGS, TMP
+         addi   OUTGOING_STACK_ARGS, OUTGOING_STACK_ARGS, REG_SIZE
+         addi   STACK_ARG_BYTES, STACK_ARG_BYTES, -REG_SIZE
+        }
+        {
+         BGZT   STACK_ARG_BYTES, .Lmemcpy_stack_args
+        }
+.Ldone_stack_args_memcpy:
+
+        {
+         /* Copy aside ORIG_FNADDR so we can overwrite its register. */
+         move   FNADDR, ORIG_FNADDR
+         /* Prepare to load argument registers. */
+         addi   REG_ADDR_PTR, r0, REG_SIZE
+         /* Load outgoing r0. */
+         LW     r0, r0
+        }
+
+        /* Load up argument registers from the REG_ARGS array. */
+#define LOAD_REG(REG, PTR) \
+        { \
+         LW     REG, PTR ; \
+         addi   PTR, PTR, REG_SIZE \
+        }
+
+        LOAD_REG(r1, REG_ADDR_PTR)
+        LOAD_REG(r2, REG_ADDR_PTR)
+        LOAD_REG(r3, REG_ADDR_PTR)
+        LOAD_REG(r4, REG_ADDR_PTR)
+        LOAD_REG(r5, REG_ADDR_PTR)
+        LOAD_REG(r6, REG_ADDR_PTR)
+        LOAD_REG(r7, REG_ADDR_PTR)
+        LOAD_REG(r8, REG_ADDR_PTR)
+        LOAD_REG(r9, REG_ADDR_PTR)
+
+        {
+         /* Call the subroutine. */
+         jalr   FNADDR
+        }
+
+        {
+         /* Restore original lr. */
+         LW     lr, r52
+         /* Prepare to recover ARGS, which we spilled earlier. */
+         addi   TMP, r52, -(2 * REG_SIZE)
+        }
+        {
+         /* Restore ARGS, so we can fill it in with the return regs r0-r9. */
+         LW     RETURN_REG_ADDR, TMP
+         /* Prepare to restore original r52. */
+         addi   TMP, r52, -REG_SIZE
+        }
+
+        {
+         /* Pop stack frame. */
+         move   sp, r52
+         /* Restore original r52. */
+         LW     r52, TMP
+        }
+
+#define STORE_REG(REG, PTR) \
+        { \
+         SW     PTR, REG ; \
+         addi   PTR, PTR, REG_SIZE \
+        }
+
+        /* Return all register values by reference. */
+        STORE_REG(r0, RETURN_REG_ADDR)
+        STORE_REG(r1, RETURN_REG_ADDR)
+        STORE_REG(r2, RETURN_REG_ADDR)
+        STORE_REG(r3, RETURN_REG_ADDR)
+        STORE_REG(r4, RETURN_REG_ADDR)
+        STORE_REG(r5, RETURN_REG_ADDR)
+        STORE_REG(r6, RETURN_REG_ADDR)
+        STORE_REG(r7, RETURN_REG_ADDR)
+        STORE_REG(r8, RETURN_REG_ADDR)
+        STORE_REG(r9, RETURN_REG_ADDR)
+
+        {
+         jrp    lr
+        }
+
+        .cfi_endproc
+        .size ffi_call_tile, .-ffi_call_tile
+
+/* ffi_closure_tile(...)
+
+   On entry, lr points to the closure plus 8 bytes, and r10
+   contains the actual return address.
+
+   This function simply dumps all register parameters into a stack array
+   and passes the closure, the registers array, and the stack arguments
+   to C code that does all of the actual closure processing. */
+
+        .section .text.ffi_closure_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_closure_tile
+        FFI_HIDDEN(ffi_closure_tile)
+
+        .cfi_startproc
+/* Room to spill all NUM_ARG_REGS incoming registers, plus frame linkage. */
+#define CLOSURE_FRAME_SIZE (((NUM_ARG_REGS * REG_SIZE * 2 + LINKAGE_SIZE) + 7) & -8)
+ffi_closure_tile:
+        {
+#ifdef __tilegx__
+         st     sp, lr
+         .cfi_offset lr, 0
+#else
+         /* Save return address (in r10 due to closure stub wrapper). */
+         SW     sp, r10
+         .cfi_return_column r10
+         .cfi_offset r10, 0
+#endif
+         /* Compute address for stack frame linkage. */
+         addli   r10, sp, -(CLOSURE_FRAME_SIZE - REG_SIZE)
+        }
+        {
+         /* Save incoming stack pointer in linkage area. */
+         SW     r10, sp
+         .cfi_offset sp, -(CLOSURE_FRAME_SIZE - REG_SIZE)
+         /* Push a new stack frame. */
+         addli   sp, sp, -CLOSURE_FRAME_SIZE
+         .cfi_adjust_cfa_offset CLOSURE_FRAME_SIZE
+        }
+
+        {
+         /* Create pointer to where to start spilling registers. */
+         addi   r10, sp, LINKAGE_SIZE
+        }
+
+        /* Spill all the incoming registers. */
+        STORE_REG(r0, r10)
+        STORE_REG(r1, r10)
+        STORE_REG(r2, r10)
+        STORE_REG(r3, r10)
+        STORE_REG(r4, r10)
+        STORE_REG(r5, r10)
+        STORE_REG(r6, r10)
+        STORE_REG(r7, r10)
+        STORE_REG(r8, r10)
+        {
+         /* Save r9. */
+         SW     r10, r9
+#ifdef __tilegx__
+         /* Pointer to closure is passed in r11. */
+         move  r0, r11
+#else
+         /* Compute pointer to the closure object. Because the closure
+            starts with a "jal ffi_closure_tile", we can just take the
+            value of lr (a phony return address pointing into the closure)
+            and subtract 8. */
+         addi   r0, lr, -8
+#endif
+         /* Compute a pointer to the register arguments we just spilled. */
+         addi   r1, sp, LINKAGE_SIZE
+        }
+        {
+         /* Compute a pointer to the extra stack arguments (if any). */
+         addli   r2, sp, CLOSURE_FRAME_SIZE + LINKAGE_SIZE
+         /* Call C code to deal with all of the grotty details. */
+         jal    ffi_closure_tile_inner
+        }
+        {
+         addli   r10, sp, CLOSURE_FRAME_SIZE
+        }
+        {
+         /* Restore the return address. */
+         LW     lr, r10
+         /* Compute pointer to registers array. */
+         addli   r10, sp, LINKAGE_SIZE + (NUM_ARG_REGS * REG_SIZE)
+        }
+        /* Return all the register values, which C code may have set. */
+        LOAD_REG(r0, r10)
+        LOAD_REG(r1, r10)
+        LOAD_REG(r2, r10)
+        LOAD_REG(r3, r10)
+        LOAD_REG(r4, r10)
+        LOAD_REG(r5, r10)
+        LOAD_REG(r6, r10)
+        LOAD_REG(r7, r10)
+        LOAD_REG(r8, r10)
+        LOAD_REG(r9, r10)
+        {
+         /* Pop the frame. */
+         addli   sp, sp, CLOSURE_FRAME_SIZE
+         jrp    lr
+        }
+
+        .cfi_endproc
+        .size   ffi_closure_tile, . - ffi_closure_tile
+
+
+/* What follows are code template instructions that get copied to the
+   closure trampoline by ffi_prep_closure_loc.  The zeroed operands
+   get replaced by their proper values at runtime. */
+
+        .section .text.ffi_template_tramp_tile, "ax", @progbits
+        .align  8
+        .globl  ffi_template_tramp_tile
+        FFI_HIDDEN(ffi_template_tramp_tile)
+ffi_template_tramp_tile:
+#ifdef __tilegx__
+        {
+          moveli r11, 0 /* backpatched to address of containing closure. */
+          moveli r10, 0 /* backpatched to ffi_closure_tile. */
+        }
+        /* Note: the following bundle gets generated multiple times
+           depending on the pointer value (esp. useful for -m32 mode). */
+        { shl16insli r11, r11, 0 ; shl16insli r10, r10, 0 }
+        { info 2+8 /* for backtracer: -> pc in lr, frame size 0 */ ; jr r10 }
+#else
+        /* 'jal .' yields a PC-relative offset of zero so we can OR in the
+           right offset at runtime. */
+        { move r10, lr ; jal . /* ffi_closure_tile */ }
+#endif
+
+        .size   ffi_template_tramp_tile, . - ffi_template_tramp_tile

data/ext/ffi_c/libffi/src/types.c

@@ -33,35 +33,58 @@
 
 /* Type definitions */
 
-#define FFI_TYPEDEF(name, type, id)		\
+#define FFI_TYPEDEF(name, type, id, maybe_const)\
 struct struct_align_##name {			\
   char c;					\
   type x;					\
 };						\
-const ffi_type ffi_type_##name = {		\
+FFI_EXTERN					\
+maybe_const ffi_type ffi_type_##name = {	\
   sizeof(type),					\
   offsetof(struct struct_align_##name, x),	\
   id, NULL					\
 }
 
+#define FFI_COMPLEX_TYPEDEF(name, type, maybe_const)	\
+static ffi_type *ffi_elements_complex_##name [2] = {	\
+	(ffi_type *)(&ffi_type_##name), NULL		\
+};							\
+struct struct_align_complex_##name {			\
+  char c;						\
+  _Complex type x;					\
+};							\
+FFI_EXTERN						\
+maybe_const ffi_type ffi_type_complex_##name = {	\
+  sizeof(_Complex type),				\
+  offsetof(struct struct_align_complex_##name, x),	\
+  FFI_TYPE_COMPLEX,					\
+  (ffi_type **)ffi_elements_complex_##name		\
+}
+
 /* Size and alignment are fake here. They must not be 0. */
-const ffi_type ffi_type_void = {
+FFI_EXTERN const ffi_type ffi_type_void = {
   1, 1, FFI_TYPE_VOID, NULL
 };
 
-FFI_TYPEDEF(uint8, UINT8, FFI_TYPE_UINT8);
-FFI_TYPEDEF(sint8, SINT8, FFI_TYPE_SINT8);
-FFI_TYPEDEF(uint16, UINT16, FFI_TYPE_UINT16);
-FFI_TYPEDEF(sint16, SINT16, FFI_TYPE_SINT16);
-FFI_TYPEDEF(uint32, UINT32, FFI_TYPE_UINT32);
-FFI_TYPEDEF(sint32, SINT32, FFI_TYPE_SINT32);
-FFI_TYPEDEF(uint64, UINT64, FFI_TYPE_UINT64);
-FFI_TYPEDEF(sint64, SINT64, FFI_TYPE_SINT64);
+FFI_TYPEDEF(uint8, UINT8, FFI_TYPE_UINT8, const);
+FFI_TYPEDEF(sint8, SINT8, FFI_TYPE_SINT8, const);
+FFI_TYPEDEF(uint16, UINT16, FFI_TYPE_UINT16, const);
+FFI_TYPEDEF(sint16, SINT16, FFI_TYPE_SINT16, const);
+FFI_TYPEDEF(uint32, UINT32, FFI_TYPE_UINT32, const);
+FFI_TYPEDEF(sint32, SINT32, FFI_TYPE_SINT32, const);
+FFI_TYPEDEF(uint64, UINT64, FFI_TYPE_UINT64, const);
+FFI_TYPEDEF(sint64, SINT64, FFI_TYPE_SINT64, const);
 
-FFI_TYPEDEF(pointer, void*, FFI_TYPE_POINTER);
+FFI_TYPEDEF(pointer, void*, FFI_TYPE_POINTER, const);
 
-FFI_TYPEDEF(float, float, FFI_TYPE_FLOAT);
-FFI_TYPEDEF(double, double, FFI_TYPE_DOUBLE);
+FFI_TYPEDEF(float, float, FFI_TYPE_FLOAT, const);
+FFI_TYPEDEF(double, double, FFI_TYPE_DOUBLE, const);
+
+#if !defined HAVE_LONG_DOUBLE_VARIANT || defined __alpha__
+#define FFI_LDBL_CONST const
+#else
+#define FFI_LDBL_CONST
+#endif
 
 #ifdef __alpha__
 /* Even if we're not configured to default to 128-bit long double, 
@@ -73,5 +96,13 @@ FFI_TYPEDEF(double, double, FFI_TYPE_DOUBLE);
 # endif
 const ffi_type ffi_type_longdouble = { 16, 16, 4, NULL };
 #elif FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
-FFI_TYPEDEF(longdouble, long double, FFI_TYPE_LONGDOUBLE);
+FFI_TYPEDEF(longdouble, long double, FFI_TYPE_LONGDOUBLE, FFI_LDBL_CONST);
+#endif
+
+#ifdef FFI_TARGET_HAS_COMPLEX_TYPE
+FFI_COMPLEX_TYPEDEF(float, float, const);
+FFI_COMPLEX_TYPEDEF(double, double, const);
+#if FFI_TYPE_LONGDOUBLE != FFI_TYPE_DOUBLE
+FFI_COMPLEX_TYPEDEF(longdouble, long double, FFI_LDBL_CONST);
+#endif
 #endif

data/ext/ffi_c/libffi/src/vax/elfbsd.S

@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2013 Miodrag Vallat.  <miod@openbsd.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * ``Software''), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * vax Foreign Function Interface
+ */
+
+#define LIBFFI_ASM	
+#include <fficonfig.h>
+#include <ffi.h>
+
+	.text
+
+/*
+ * void *					%r0
+ * ffi_call_elfbsd(extended_cif *ecif,		4(%ap)
+ *		   unsigned bytes,		8(%ap)
+ *		   unsigned flags,		12(%ap)
+ *		   void *rvalue,		16(%ap)
+ *		   void (*fn)());		20(%ap)
+ */
+	.globl	ffi_call_elfbsd
+	.type	ffi_call_elfbsd,@function
+	.align	2
+ffi_call_elfbsd:
+	.word	0x00c		# save R2 and R3
+
+	# Allocate stack space for the args
+	subl2	8(%ap), %sp
+
+	# Call ffi_prep_args
+	pushl	%sp
+	pushl	4(%ap)
+	calls	$2, ffi_prep_args
+
+	# Get function pointer
+	movl	20(%ap), %r1
+
+	# Build a CALLS frame
+	ashl	$-2, 8(%ap), %r0
+	pushl	%r0		# argument stack usage
+	movl	%sp, %r0	# future %ap
+	# saved registers
+	bbc	$11, 0(%r1), 1f
+	pushl	%r11
+1:	bbc	$10, 0(%r1), 1f
+	pushl	%r10
+1:	bbc	$9, 0(%r1), 1f
+	pushl	%r9
+1:	bbc	$8, 0(%r1), 1f
+	pushl	%r8
+1:	bbc	$7, 0(%r1), 1f
+	pushl	%r7
+1:	bbc	$6, 0(%r1), 1f
+	pushl	%r6
+1:	bbc	$5, 0(%r1), 1f
+	pushl	%r5
+1:	bbc	$4, 0(%r1), 1f
+	pushl	%r4
+1:	bbc	$3, 0(%r1), 1f
+	pushl	%r3
+1:	bbc	$2, 0(%r1), 1f
+	pushl	%r2
+1:	
+	pushal	9f
+	pushl	%fp
+	pushl	%ap
+	movl	16(%ap), %r3	# struct return address, if needed
+	movl	%r0, %ap
+	movzwl	4(%fp), %r0	# previous PSW, without the saved registers mask
+	bisl2	$0x20000000, %r0 # calls frame
+	movzwl	0(%r1), %r2
+	bicw2	$0xf003, %r2	# only keep R11-R2
+	ashl	$16, %r2, %r2
+	bisl2	%r2, %r0	# saved register mask of the called function
+	pushl	%r0	
+	pushl	$0
+	movl	%sp, %fp
+
+	# Invoke the function
+	pushal	2(%r1)		# skip procedure entry mask
+	movl	%r3, %r1
+	bicpsw	$0x000f
+	rsb
+
+9:
+	# Copy return value if necessary
+	tstl	16(%ap)
+	jeql	9f
+	movl	16(%ap), %r2
+
+	bbc	$0, 12(%ap), 1f	# CIF_FLAGS_CHAR
+	movb	%r0, 0(%r2)
+	brb	9f
+1:
+	bbc	$1, 12(%ap), 1f	# CIF_FLAGS_SHORT
+	movw	%r0, 0(%r2)
+	brb	9f
+1:
+	bbc	$2, 12(%ap), 1f	# CIF_FLAGS_INT
+	movl	%r0, 0(%r2)
+	brb	9f
+1:
+	bbc	$3, 12(%ap), 1f	# CIF_FLAGS_DINT
+	movq	%r0, 0(%r2)
+	brb	9f
+1:
+	movl	%r1, %r0	# might have been a struct
+	#brb	9f
+
+9:
+	ret
+
+/*
+ * ffi_closure_elfbsd(void);
+ * invoked with	%r0: ffi_closure *closure
+ */
+	.globl	ffi_closure_elfbsd
+	.type	ffi_closure_elfbsd, @function
+	.align	2
+ffi_closure_elfbsd:
+	.word	0
+
+	# Allocate room on stack for return value
+	subl2	$8, %sp
+
+	# Invoke the closure function
+	pushal	4(%ap)		# calling stack
+	pushal	4(%sp)		# return value
+	pushl	%r0		# closure
+	calls	$3, ffi_closure_elfbsd_inner
+
+	# Copy return value if necessary
+	bitb	$1, %r0		# CIF_FLAGS_CHAR
+	beql	1f
+	movb	0(%sp), %r0
+	brb	9f
+1:
+	bitb	$2, %r0		# CIF_FLAGS_SHORT
+	beql	1f
+	movw	0(%sp), %r0
+	brb	9f
+1:
+	bitb	$4, %r0		# CIF_FLAGS_INT
+	beql	1f
+	movl	0(%sp), %r0
+	brb	9f
+1:
+	bitb	$8, %r0		# CIF_FLAGS_DINT
+	beql	1f
+	movq	0(%sp), %r0
+	#brb	9f
+1:
+
+9:
+	ret
+
+/*
+ * ffi_closure_struct_elfbsd(void);
+ * invoked with	%r0: ffi_closure *closure
+ *		%r1: struct return address
+ */
+	.globl	ffi_closure_struct_elfbsd
+	.type	ffi_closure_struct_elfbsd, @function
+	.align	2
+ffi_closure_struct_elfbsd:
+	.word	0
+
+	# Invoke the closure function
+	pushal	4(%ap)		# calling stack
+	pushl	%r1		# return value
+	pushl	%r0		# closure
+	calls	$3, ffi_closure_elfbsd_inner
+
+	ret