ffi 1.1.5 → 1.15.5

data/ext/ffi_c/libffi/src/powerpc/ffitarget.h

@@ -1,6 +1,8 @@
 /* -----------------------------------------------------------------*-C-*-
-   ffitarget.h - Copyright (c) 1996-2003  Red Hat, Inc.
-   Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc
+   ffitarget.h - Copyright (c) 2012  Anthony Green
+                 Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc
+                 Copyright (c) 1996-2003  Red Hat, Inc.
+
    Target configuration macros for PowerPC.
 
    Permission is hereby granted, free of charge, to any person obtaining
@@ -28,6 +30,10 @@
 #ifndef LIBFFI_TARGET_H
 #define LIBFFI_TARGET_H
 
+#ifndef LIBFFI_H
+#error "Please do not include ffitarget.h directly into your source.  Use ffi.h instead."
+#endif
+
 /* ---- System specific configurations ----------------------------------- */
 
 #if defined (POWERPC) && defined (__powerpc64__)	/* linux64 */
@@ -54,49 +60,80 @@ typedef signed long            ffi_sarg;
 typedef enum ffi_abi {
   FFI_FIRST_ABI = 0,
 
-#ifdef POWERPC
-  FFI_SYSV,
-  FFI_GCC_SYSV,
-  FFI_LINUX64,
-  FFI_LINUX,
-  FFI_LINUX_SOFT_FLOAT,
-# ifdef POWERPC64
-  FFI_DEFAULT_ABI = FFI_LINUX64,
-# else
-#  if (!defined(__NO_FPRS__) && (__LDBL_MANT_DIG__ == 106))
-  FFI_DEFAULT_ABI = FFI_LINUX,
-#  else
-#   ifdef __NO_FPRS__
-  FFI_DEFAULT_ABI = FFI_LINUX_SOFT_FLOAT,
-#   else
-  FFI_DEFAULT_ABI = FFI_GCC_SYSV,
-#   endif
-#  endif
-# endif
-#endif
-
-#ifdef POWERPC_AIX
+#if defined (POWERPC_AIX)
   FFI_AIX,
   FFI_DARWIN,
   FFI_DEFAULT_ABI = FFI_AIX,
-#endif
+  FFI_LAST_ABI
 
-#ifdef POWERPC_DARWIN
+#elif defined (POWERPC_DARWIN)
   FFI_AIX,
   FFI_DARWIN,
   FFI_DEFAULT_ABI = FFI_DARWIN,
-#endif
+  FFI_LAST_ABI
 
-#ifdef POWERPC_FREEBSD
-  FFI_SYSV,
-  FFI_GCC_SYSV,
-  FFI_LINUX64,
-  FFI_LINUX,
-  FFI_LINUX_SOFT_FLOAT,
-  FFI_DEFAULT_ABI = FFI_SYSV,
+#else
+  /* The FFI_COMPAT values are used by old code.  Since libffi may be
+     a shared library we have to support old values for backwards
+     compatibility.  */
+  FFI_COMPAT_SYSV,
+  FFI_COMPAT_GCC_SYSV,
+  FFI_COMPAT_LINUX64,
+  FFI_COMPAT_LINUX,
+  FFI_COMPAT_LINUX_SOFT_FLOAT,
+
+# if defined (POWERPC64)
+  /* This bit, always set in new code, must not be set in any of the
+     old FFI_COMPAT values that might be used for 64-bit linux.  We
+     only need worry about FFI_COMPAT_LINUX64, but to be safe avoid
+     all old values.  */
+  FFI_LINUX = 8,
+  /* This and following bits can reuse FFI_COMPAT values.  */
+  FFI_LINUX_STRUCT_ALIGN = 1,
+  FFI_LINUX_LONG_DOUBLE_128 = 2,
+  FFI_LINUX_LONG_DOUBLE_IEEE128 = 4,
+  FFI_DEFAULT_ABI = (FFI_LINUX
+#  ifdef __STRUCT_PARM_ALIGN__
+		     | FFI_LINUX_STRUCT_ALIGN
+#  endif
+#  ifdef __LONG_DOUBLE_128__
+		     | FFI_LINUX_LONG_DOUBLE_128
+#   ifdef __LONG_DOUBLE_IEEE128__
+		     | FFI_LINUX_LONG_DOUBLE_IEEE128
+#   endif
+#  endif
+		     ),
+  FFI_LAST_ABI = 16
+
+# else
+  /* This bit, always set in new code, must not be set in any of the
+     old FFI_COMPAT values that might be used for 32-bit linux/sysv/bsd.  */
+  FFI_SYSV = 8,
+  /* This and following bits can reuse FFI_COMPAT values.  */
+  FFI_SYSV_SOFT_FLOAT = 1,
+  FFI_SYSV_STRUCT_RET = 2,
+  FFI_SYSV_IBM_LONG_DOUBLE = 4,
+  FFI_SYSV_LONG_DOUBLE_128 = 16,
+
+  FFI_DEFAULT_ABI = (FFI_SYSV
+#  ifdef __NO_FPRS__
+		     | FFI_SYSV_SOFT_FLOAT
+#  endif
+#  if (defined (__SVR4_STRUCT_RETURN)					\
+       || defined (POWERPC_FREEBSD) && !defined (__AIX_STRUCT_RETURN))
+		     | FFI_SYSV_STRUCT_RET
+#  endif
+#  if __LDBL_MANT_DIG__ == 106
+		     | FFI_SYSV_IBM_LONG_DOUBLE
+#  endif
+#  ifdef __LONG_DOUBLE_128__
+		     | FFI_SYSV_LONG_DOUBLE_128
+#  endif
+		     ),
+  FFI_LAST_ABI = 32
+# endif
 #endif
 
-  FFI_LAST_ABI
 } ffi_abi;
 #endif
 
@@ -104,26 +141,54 @@ typedef enum ffi_abi {
 
 #define FFI_CLOSURES 1
 #define FFI_NATIVE_RAW_API 0
+#if defined (POWERPC) || defined (POWERPC_FREEBSD)
+# define FFI_GO_CLOSURES 1
+# define FFI_TARGET_SPECIFIC_VARIADIC 1
+# define FFI_EXTRA_CIF_FIELDS unsigned nfixedargs
+#endif
+#if defined (POWERPC_AIX)
+# define FFI_GO_CLOSURES 1
+#endif
 
-/* For additional types like the below, take care about the order in
-   ppc_closures.S. They must follow after the FFI_TYPE_LAST.  */
+/* ppc_closure.S and linux64_closure.S expect this.  */
+#define FFI_PPC_TYPE_LAST FFI_TYPE_POINTER
 
-/* Needed for soft-float long-double-128 support.  */
-#define FFI_TYPE_UINT128 (FFI_TYPE_LAST + 1)
+/* We define additional types below.  If generic types are added that
+   must be supported by powerpc libffi then it is likely that
+   FFI_PPC_TYPE_LAST needs increasing *and* the jump tables in
+   ppc_closure.S and linux64_closure.S be extended.  */
 
-/* Needed for FFI_SYSV small structure returns.
-   We use two flag bits, (FLAG_SYSV_SMST_R3, FLAG_SYSV_SMST_R4) which are
-   defined in ffi.c, to determine the exact return type and its size.  */
-#define FFI_SYSV_TYPE_SMALL_STRUCT (FFI_TYPE_LAST + 2)
+#if !(FFI_TYPE_LAST == FFI_PPC_TYPE_LAST		\
+      || (FFI_TYPE_LAST == FFI_TYPE_COMPLEX		\
+	  && !defined FFI_TARGET_HAS_COMPLEX_TYPE))
+# error "You likely have a broken powerpc libffi"
+#endif
 
-#if defined(POWERPC64) || defined(POWERPC_AIX)
+/* Needed for soft-float long-double-128 support.  */
+#define FFI_TYPE_UINT128 (FFI_PPC_TYPE_LAST + 1)
+
+/* Needed for FFI_SYSV small structure returns.  */
+#define FFI_SYSV_TYPE_SMALL_STRUCT (FFI_PPC_TYPE_LAST + 2)
+
+/* Used by ELFv2 for homogenous structure returns.  */
+#define FFI_V2_TYPE_VECTOR		(FFI_PPC_TYPE_LAST + 1)
+#define FFI_V2_TYPE_VECTOR_HOMOG	(FFI_PPC_TYPE_LAST + 2)
+#define FFI_V2_TYPE_FLOAT_HOMOG		(FFI_PPC_TYPE_LAST + 3)
+#define FFI_V2_TYPE_DOUBLE_HOMOG	(FFI_PPC_TYPE_LAST + 4)
+#define FFI_V2_TYPE_SMALL_STRUCT	(FFI_PPC_TYPE_LAST + 5)
+
+#if _CALL_ELF == 2
+# define FFI_TRAMPOLINE_SIZE 32
+#else
+# if defined(POWERPC64) || defined(POWERPC_AIX)
 #  if defined(POWERPC_DARWIN64)
 #    define FFI_TRAMPOLINE_SIZE 48
 #  else
 #    define FFI_TRAMPOLINE_SIZE 24
 #  endif
-#else /* POWERPC || POWERPC_AIX */
+# else /* POWERPC || POWERPC_AIX */
 #  define FFI_TRAMPOLINE_SIZE 40
+# endif
 #endif
 
 #ifndef LIBFFI_ASM

data/ext/ffi_c/libffi/src/powerpc/linux64.S

@@ -29,159 +29,263 @@
 #include <fficonfig.h>
 #include <ffi.h>
 
-#ifdef __powerpc64__
-	.hidden	ffi_call_LINUX64, .ffi_call_LINUX64
-	.globl	ffi_call_LINUX64, .ffi_call_LINUX64
+#ifdef POWERPC64
+	.hidden	ffi_call_LINUX64
+	.globl	ffi_call_LINUX64
+	.text
+	.cfi_startproc
+# if _CALL_ELF == 2
+ffi_call_LINUX64:
+#  ifndef __PCREL__
+	addis	%r2, %r12, .TOC.-ffi_call_LINUX64@ha
+	addi	%r2, %r2, .TOC.-ffi_call_LINUX64@l
+#  endif
+	.localentry ffi_call_LINUX64, . - ffi_call_LINUX64
+# else
 	.section	".opd","aw"
 	.align	3
 ffi_call_LINUX64:
+#  ifdef _CALL_LINUX
+	.quad	.L.ffi_call_LINUX64,.TOC.@tocbase,0
+	.type	ffi_call_LINUX64,@function
+	.text
+.L.ffi_call_LINUX64:
+#  else
+	.hidden	.ffi_call_LINUX64
+	.globl	.ffi_call_LINUX64
 	.quad	.ffi_call_LINUX64,.TOC.@tocbase,0
 	.size	ffi_call_LINUX64,24
 	.type	.ffi_call_LINUX64,@function
 	.text
 .ffi_call_LINUX64:
-.LFB1:
+#  endif
+# endif
 	mflr	%r0
 	std	%r28, -32(%r1)
 	std	%r29, -24(%r1)
 	std	%r30, -16(%r1)
 	std	%r31, -8(%r1)
+	std	%r7, 8(%r1)	/* closure, saved in cr field.  */
 	std	%r0, 16(%r1)
 
 	mr	%r28, %r1	/* our AP.  */
-.LCFI0:
-	stdux	%r1, %r1, %r4
-	mr	%r31, %r5	/* flags, */
-	mr	%r30, %r6	/* rvalue, */
-	mr	%r29, %r7	/* function address.  */
+	.cfi_def_cfa_register 28
+	.cfi_offset 65, 16
+	.cfi_offset 31, -8
+	.cfi_offset 30, -16
+	.cfi_offset 29, -24
+	.cfi_offset 28, -32
+
+	stdux	%r1, %r1, %r8
+	mr	%r31, %r6	/* flags, */
+	mr	%r30, %r5	/* rvalue, */
+	mr	%r29, %r4	/* function address.  */
+/* Save toc pointer, not for the ffi_prep_args64 call, but for the later
+   bctrl function call.  */
+# if _CALL_ELF == 2
+	std	%r2, 24(%r1)
+# else
 	std	%r2, 40(%r1)
+# endif
 
 	/* Call ffi_prep_args64.  */
 	mr	%r4, %r1
+# if defined _CALL_LINUX || _CALL_ELF == 2
+#  ifdef __PCREL__
+	bl	ffi_prep_args64@notoc
+#  else
+	bl	ffi_prep_args64
+	nop
+#  endif
+# else
 	bl	.ffi_prep_args64
+	nop
+# endif
 
-	ld	%r0, 0(%r29)
+# if _CALL_ELF == 2
+	mr	%r12, %r29
+# else
+	ld	%r12, 0(%r29)
 	ld	%r2, 8(%r29)
-	ld	%r11, 16(%r29)
-
+# endif
 	/* Now do the call.  */
-	/* Set up cr1 with bits 4-7 of the flags.  */
-	mtcrf	0x40, %r31
+	/* Set up cr1 with bits 3-7 of the flags.  */
+	mtcrf	0xc0, %r31
 
 	/* Get the address to call into CTR.  */
-	mtctr	%r0
+	mtctr	%r12
 	/* Load all those argument registers.  */
-	ld	%r3, -32-(8*8)(%r28)
-	ld	%r4, -32-(7*8)(%r28)
-	ld	%r5, -32-(6*8)(%r28)
-	ld	%r6, -32-(5*8)(%r28)
+	addi	%r29, %r28, -32-(8*8)
+	ld	%r3,  (0*8)(%r29)
+	ld	%r4,  (1*8)(%r29)
+	ld	%r5,  (2*8)(%r29)
+	ld	%r6,  (3*8)(%r29)
 	bf-	5, 1f
-	ld	%r7, -32-(4*8)(%r28)
-	ld	%r8, -32-(3*8)(%r28)
-	ld	%r9, -32-(2*8)(%r28)
-	ld	%r10, -32-(1*8)(%r28)
+	ld	%r7,  (4*8)(%r29)
+	ld	%r8,  (5*8)(%r29)
+	ld	%r9,  (6*8)(%r29)
+	ld	%r10, (7*8)(%r29)
 1:
 
 	/* Load all the FP registers.  */
 	bf-	6, 2f
-	lfd	%f1, -32-(21*8)(%r28)
-	lfd	%f2, -32-(20*8)(%r28)
-	lfd	%f3, -32-(19*8)(%r28)
-	lfd	%f4, -32-(18*8)(%r28)
-	lfd	%f5, -32-(17*8)(%r28)
-	lfd	%f6, -32-(16*8)(%r28)
-	lfd	%f7, -32-(15*8)(%r28)
-	lfd	%f8, -32-(14*8)(%r28)
-	lfd	%f9, -32-(13*8)(%r28)
-	lfd	%f10, -32-(12*8)(%r28)
-	lfd	%f11, -32-(11*8)(%r28)
-	lfd	%f12, -32-(10*8)(%r28)
-	lfd	%f13, -32-(9*8)(%r28)
+	addi	%r29, %r29, -(14*8)
+	lfd	%f1,  ( 1*8)(%r29)
+	lfd	%f2,  ( 2*8)(%r29)
+	lfd	%f3,  ( 3*8)(%r29)
+	lfd	%f4,  ( 4*8)(%r29)
+	lfd	%f5,  ( 5*8)(%r29)
+	lfd	%f6,  ( 6*8)(%r29)
+	lfd	%f7,  ( 7*8)(%r29)
+	lfd	%f8,  ( 8*8)(%r29)
+	lfd	%f9,  ( 9*8)(%r29)
+	lfd	%f10, (10*8)(%r29)
+	lfd	%f11, (11*8)(%r29)
+	lfd	%f12, (12*8)(%r29)
+	lfd	%f13, (13*8)(%r29)
 2:
 
+	/* Load all the vector registers.  */
+	bf-	3, 3f
+	addi	%r29, %r29, -16
+	lvx	%v13, 0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v12, 0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v11, 0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v10, 0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v9,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v8,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v7,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v6,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v5,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v4,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v3,  0, %r29
+	addi	%r29, %r29, -16
+	lvx	%v2,  0, %r29
+3:
+
 	/* Make the call.  */
+	ld	%r11, 8(%r28)
 	bctrl
 
 	/* This must follow the call immediately, the unwinder
 	   uses this to find out if r2 has been saved or not.  */
+# if _CALL_ELF == 2
+	ld	%r2, 24(%r1)
+# else
 	ld	%r2, 40(%r1)
+# endif
 
 	/* Now, deal with the return value.  */
 	mtcrf	0x01, %r31
-	bt-	30, .Ldone_return_value
-	bt-	29, .Lfp_return_value
+	bt	31, .Lstruct_return_value
+	bt	30, .Ldone_return_value
+	bt	29, .Lfp_return_value
+	bt	28, .Lvec_return_value
 	std	%r3, 0(%r30)
 	/* Fall through...  */
 
 .Ldone_return_value:
 	/* Restore the registers we used and return.  */
 	mr	%r1, %r28
+	.cfi_def_cfa_register 1
 	ld	%r0, 16(%r28)
-	ld	%r28, -32(%r1)
+	ld	%r28, -32(%r28)
 	mtlr	%r0
 	ld	%r29, -24(%r1)
 	ld	%r30, -16(%r1)
 	ld	%r31, -8(%r1)
 	blr
 
+.Lvec_return_value:
+	stvx	%v2, 0, %r30
+	b	.Ldone_return_value
+
 .Lfp_return_value:
-	bf	28, .Lfloat_return_value
-	stfd	%f1, 0(%r30)
+	.cfi_def_cfa_register 28
 	mtcrf	0x02, %r31 /* cr6  */
-	bf	27, .Ldone_return_value
+	bf	27, .Lfloat_return_value
+	stfd	%f1, 0(%r30)
+	bf	26, .Ldone_return_value
 	stfd	%f2, 8(%r30)
 	b	.Ldone_return_value
 .Lfloat_return_value:
 	stfs	%f1, 0(%r30)
 	b	.Ldone_return_value
-.LFE1:
+
+.Lstruct_return_value:
+	bf	29, .Lvec_homog_or_small_struct
+	mtcrf	0x02, %r31 /* cr6  */
+	bf	27, .Lfloat_homog_return_value
+	stfd	%f1, 0(%r30)
+	stfd	%f2, 8(%r30)
+	stfd	%f3, 16(%r30)
+	stfd	%f4, 24(%r30)
+	stfd	%f5, 32(%r30)
+	stfd	%f6, 40(%r30)
+	stfd	%f7, 48(%r30)
+	stfd	%f8, 56(%r30)
+	b	.Ldone_return_value
+
+.Lfloat_homog_return_value:
+	stfs	%f1, 0(%r30)
+	stfs	%f2, 4(%r30)
+	stfs	%f3, 8(%r30)
+	stfs	%f4, 12(%r30)
+	stfs	%f5, 16(%r30)
+	stfs	%f6, 20(%r30)
+	stfs	%f7, 24(%r30)
+	stfs	%f8, 28(%r30)
+	b	.Ldone_return_value
+
+.Lvec_homog_or_small_struct:
+	bf	28, .Lsmall_struct
+	stvx	%v2, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v3, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v4, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v5, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v6, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v7, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v8, 0, %r30
+	addi	%r30, %r30, 16
+	stvx	%v9, 0, %r30
+	b	.Ldone_return_value
+
+.Lsmall_struct:
+	std	%r3, 0(%r30)
+	std	%r4, 8(%r30)
+	b	.Ldone_return_value
+
+	.cfi_endproc
+# if _CALL_ELF == 2
+	.size	ffi_call_LINUX64,.-ffi_call_LINUX64
+# else
+#  ifdef _CALL_LINUX
+	.size	ffi_call_LINUX64,.-.L.ffi_call_LINUX64
+#  else
 	.long	0
 	.byte	0,12,0,1,128,4,0,0
 	.size	.ffi_call_LINUX64,.-.ffi_call_LINUX64
+#  endif
+# endif
 
-	.section	.eh_frame,EH_FRAME_FLAGS,@progbits
-.Lframe1:
-	.4byte	.LECIE1-.LSCIE1	 # Length of Common Information Entry
-.LSCIE1:
-	.4byte	0x0	 # CIE Identifier Tag
-	.byte	0x1	 # CIE Version
-	.ascii "zR\0"	 # CIE Augmentation
-	.uleb128 0x1	 # CIE Code Alignment Factor
-	.sleb128 -8	 # CIE Data Alignment Factor
-	.byte	0x41	 # CIE RA Column
-	.uleb128 0x1	 # Augmentation size
-	.byte	0x14	 # FDE Encoding (pcrel udata8)
-	.byte	0xc	 # DW_CFA_def_cfa
-	.uleb128 0x1
-	.uleb128 0x0
-	.align 3
-.LECIE1:
-.LSFDE1:
-	.4byte	.LEFDE1-.LASFDE1	 # FDE Length
-.LASFDE1:
-	.4byte	.LASFDE1-.Lframe1	 # FDE CIE offset
-	.8byte	.LFB1-.	 # FDE initial location
-	.8byte	.LFE1-.LFB1	 # FDE address range
-	.uleb128 0x0	 # Augmentation size
-	.byte	0x2	 # DW_CFA_advance_loc1
-	.byte	.LCFI0-.LFB1
-	.byte	0xd	 # DW_CFA_def_cfa_register
-	.uleb128 0x1c
-	.byte	0x11	 # DW_CFA_offset_extended_sf
-	.uleb128 0x41
-	.sleb128 -2
-	.byte	0x9f	 # DW_CFA_offset, column 0x1f
-	.uleb128 0x1
-	.byte	0x9e	 # DW_CFA_offset, column 0x1e
-	.uleb128 0x2
-	.byte	0x9d	 # DW_CFA_offset, column 0x1d
-	.uleb128 0x3
-	.byte	0x9c	 # DW_CFA_offset, column 0x1c
-	.uleb128 0x4
-	.align 3
-.LEFDE1:
 #endif
 
-#if defined __ELF__ && defined __linux__
+#if (defined __ELF__ && defined __linux__) || _CALL_ELF == 2
 	.section	.note.GNU-stack,"",@progbits
 #endif