ffi 1.1.5 → 1.15.5

data/ext/ffi_c/libffi/aclocal.m4

@@ -1,1873 +0,0 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
-#
-#   Copyright (C) 1999-2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Thomas Tanner, 1999
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 18 LTDL_INIT
-
-# LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
-# ------------------------------------------
-# DIRECTORY contains the libltdl sources.  It is okay to call this
-# function multiple times, as long as the same DIRECTORY is always given.
-AC_DEFUN([LT_CONFIG_LTDL_DIR],
-[AC_BEFORE([$0], [LTDL_INIT])
-_$0($*)
-])# LT_CONFIG_LTDL_DIR
-
-# We break this out into a separate macro, so that we can call it safely
-# internally without being caught accidentally by the sed scan in libtoolize.
-m4_defun([_LT_CONFIG_LTDL_DIR],
-[dnl remove trailing slashes
-m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$]))
-m4_case(_LTDL_DIR,
-	[], [dnl only set lt_ltdl_dir if _ARG_DIR is not simply `.'
-	     m4_if(_ARG_DIR, [.],
-	             [],
-		 [m4_define([_LTDL_DIR], _ARG_DIR)
-	          _LT_SHELL_INIT([lt_ltdl_dir=']_ARG_DIR['])])],
-    [m4_if(_ARG_DIR, _LTDL_DIR,
-	    [],
-	[m4_fatal([multiple libltdl directories: `]_LTDL_DIR[', `]_ARG_DIR['])])])
-m4_popdef([_ARG_DIR])
-])# _LT_CONFIG_LTDL_DIR
-
-# Initialise:
-m4_define([_LTDL_DIR], [])
-
-
-# _LT_BUILD_PREFIX
-# ----------------
-# If Autoconf is new enough, expand to `${top_build_prefix}', otherwise
-# to `${top_builddir}/'.
-m4_define([_LT_BUILD_PREFIX],
-[m4_ifdef([AC_AUTOCONF_VERSION],
-   [m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.62]),
-	  [-1], [m4_ifdef([_AC_HAVE_TOP_BUILD_PREFIX],
-			  [${top_build_prefix}],
-			  [${top_builddir}/])],
-	  [${top_build_prefix}])],
-   [${top_builddir}/])[]dnl
-])
-
-
-# LTDL_CONVENIENCE
-# ----------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  LIBLTDL will be prefixed with
-# '${top_build_prefix}' if available, otherwise with '${top_builddir}/',
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!).  If your package is not flat and you're not using automake,
-# define top_build_prefix, top_builddir, and top_srcdir appropriately
-# in your Makefiles.
-AC_DEFUN([LTDL_CONVENIENCE],
-[AC_BEFORE([$0], [LTDL_INIT])dnl
-dnl Although the argument is deprecated and no longer documented,
-dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one
-dnl here make sure it is the same as any other declaration of libltdl's
-dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
-dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
-m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
-_$0()
-])# LTDL_CONVENIENCE
-
-# AC_LIBLTDL_CONVENIENCE accepted a directory argument in older libtools,
-# now we have LT_CONFIG_LTDL_DIR:
-AU_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
-_LTDL_CONVENIENCE])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [])
-
-
-# _LTDL_CONVENIENCE
-# -----------------
-# Code shared by LTDL_CONVENIENCE and LTDL_INIT([convenience]).
-m4_defun([_LTDL_CONVENIENCE],
-[case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-esac
-LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la"
-LTDLDEPS=$LIBLTDL
-LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
-
-AC_SUBST([LIBLTDL])
-AC_SUBST([LTDLDEPS])
-AC_SUBST([LTDLINCL])
-
-# For backwards non-gettext consistent compatibility...
-INCLTDL="$LTDLINCL"
-AC_SUBST([INCLTDL])
-])# _LTDL_CONVENIENCE
-
-
-# LTDL_INSTALLABLE
-# ----------------
-# sets LIBLTDL to the link flags for the libltdl installable library
-# and LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called from here.  If an installed libltdl
-# is not found, LIBLTDL will be prefixed with '${top_build_prefix}' if
-# available, otherwise with '${top_builddir}/', and LTDLINCL will be
-# prefixed with '${top_srcdir}/' (note the single quotes!).  If your
-# package is not flat and you're not using automake, define top_build_prefix,
-# top_builddir, and top_srcdir appropriately in your Makefiles.
-# In the future, this macro may have to be called after LT_INIT.
-AC_DEFUN([LTDL_INSTALLABLE],
-[AC_BEFORE([$0], [LTDL_INIT])dnl
-dnl Although the argument is deprecated and no longer documented,
-dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one
-dnl here make sure it is the same as any other declaration of libltdl's
-dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
-dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
-m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
-_$0()
-])# LTDL_INSTALLABLE
-
-# AC_LIBLTDL_INSTALLABLE accepted a directory argument in older libtools,
-# now we have LT_CONFIG_LTDL_DIR:
-AU_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
-_LTDL_INSTALLABLE])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [])
-
-
-# _LTDL_INSTALLABLE
-# -----------------
-# Code shared by LTDL_INSTALLABLE and LTDL_INIT([installable]).
-m4_defun([_LTDL_INSTALLABLE],
-[if test -f $prefix/lib/libltdl.la; then
-  lt_save_LDFLAGS="$LDFLAGS"
-  LDFLAGS="-L$prefix/lib $LDFLAGS"
-  AC_CHECK_LIB([ltdl], [lt_dlinit], [lt_lib_ltdl=yes])
-  LDFLAGS="$lt_save_LDFLAGS"
-  if test x"${lt_lib_ltdl-no}" = xyes; then
-    if test x"$enable_ltdl_install" != xyes; then
-      # Don't overwrite $prefix/lib/libltdl.la without --enable-ltdl-install
-      AC_MSG_WARN([not overwriting libltdl at $prefix, force with `--enable-ltdl-install'])
-      enable_ltdl_install=no
-    fi
-  elif test x"$enable_ltdl_install" = xno; then
-    AC_MSG_WARN([libltdl not installed, but installation disabled])
-  fi
-fi
-
-# If configure.ac declared an installable ltdl, and the user didn't override
-# with --disable-ltdl-install, we will install the shipped libltdl.
-case $enable_ltdl_install in
-  no) ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-      LIBLTDL="-lltdl"
-      LTDLDEPS=
-      LTDLINCL=
-      ;;
-  *)  enable_ltdl_install=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-install"
-      LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdl.la"
-      LTDLDEPS=$LIBLTDL
-      LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
-      ;;
-esac
-
-AC_SUBST([LIBLTDL])
-AC_SUBST([LTDLDEPS])
-AC_SUBST([LTDLINCL])
-
-# For backwards non-gettext consistent compatibility...
-INCLTDL="$LTDLINCL"
-AC_SUBST([INCLTDL])
-])# LTDL_INSTALLABLE
-
-
-# _LTDL_MODE_DISPATCH
-# -------------------
-m4_define([_LTDL_MODE_DISPATCH],
-[dnl If _LTDL_DIR is `.', then we are configuring libltdl itself:
-m4_if(_LTDL_DIR, [],
-	[],
-    dnl if _LTDL_MODE was not set already, the default value is `subproject':
-    [m4_case(m4_default(_LTDL_MODE, [subproject]),
-	  [subproject], [AC_CONFIG_SUBDIRS(_LTDL_DIR)
-			  _LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"])],
-	  [nonrecursive], [_LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"])],
-	  [recursive], [],
-	[m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])dnl
-dnl Be careful not to expand twice:
-m4_define([$0], [])
-])# _LTDL_MODE_DISPATCH
-
-
-# _LT_LIBOBJ(MODULE_NAME)
-# -----------------------
-# Like AC_LIBOBJ, except that MODULE_NAME goes into _LT_LIBOBJS instead
-# of into LIBOBJS.
-AC_DEFUN([_LT_LIBOBJ], [
-  m4_pattern_allow([^_LT_LIBOBJS$])
-  _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext"
-])# _LT_LIBOBJS
-
-
-# LTDL_INIT([OPTIONS])
-# --------------------
-# Clients of libltdl can use this macro to allow the installer to
-# choose between a shipped copy of the ltdl sources or a preinstalled
-# version of the library.  If the shipped ltdl sources are not in a
-# subdirectory named libltdl, the directory name must be given by
-# LT_CONFIG_LTDL_DIR.
-AC_DEFUN([LTDL_INIT],
-[dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-dnl We need to keep our own list of libobjs separate from our parent project,
-dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while
-dnl we look for our own LIBOBJs.
-m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ]))
-m4_pushdef([AC_LIBSOURCES])
-
-dnl If not otherwise defined, default to the 1.5.x compatible subproject mode:
-m4_if(_LTDL_MODE, [],
-        [m4_define([_LTDL_MODE], m4_default([$2], [subproject]))
-        m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])],
-                [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])
-
-AC_ARG_WITH([included_ltdl],
-    [AS_HELP_STRING([--with-included-ltdl],
-                    [use the GNU ltdl sources included here])])
-
-if test "x$with_included_ltdl" != xyes; then
-  # We are not being forced to use the included libltdl sources, so
-  # decide whether there is a useful installed version we can use.
-  AC_CHECK_HEADER([ltdl.h],
-      [AC_CHECK_DECL([lt_dlinterface_register],
-	   [AC_CHECK_LIB([ltdl], [lt_dladvise_preload],
-	       [with_included_ltdl=no],
-	       [with_included_ltdl=yes])],
-	   [with_included_ltdl=yes],
-	   [AC_INCLUDES_DEFAULT
-	    #include <ltdl.h>])],
-      [with_included_ltdl=yes],
-      [AC_INCLUDES_DEFAULT]
-  )
-fi
-
-dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE
-dnl was called yet, then for old times' sake, we assume libltdl is in an
-dnl eponymous directory:
-AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])])
-
-AC_ARG_WITH([ltdl_include],
-    [AS_HELP_STRING([--with-ltdl-include=DIR],
-                    [use the ltdl headers installed in DIR])])
-
-if test -n "$with_ltdl_include"; then
-  if test -f "$with_ltdl_include/ltdl.h"; then :
-  else
-    AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include'])
-  fi
-else
-  with_ltdl_include=no
-fi
-
-AC_ARG_WITH([ltdl_lib],
-    [AS_HELP_STRING([--with-ltdl-lib=DIR],
-                    [use the libltdl.la installed in DIR])])
-
-if test -n "$with_ltdl_lib"; then
-  if test -f "$with_ltdl_lib/libltdl.la"; then :
-  else
-    AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib'])
-  fi
-else
-  with_ltdl_lib=no
-fi
-
-case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in
-  ,yes,no,no,)
-	m4_case(m4_default(_LTDL_TYPE, [convenience]),
-	    [convenience], [_LTDL_CONVENIENCE],
-	    [installable], [_LTDL_INSTALLABLE],
-	  [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)])
-	;;
-  ,no,no,no,)
-	# If the included ltdl is not to be used, then use the
-	# preinstalled libltdl we found.
-	AC_DEFINE([HAVE_LTDL], [1],
-	  [Define this if a modern libltdl is already installed])
-	LIBLTDL=-lltdl
-	LTDLDEPS=
-	LTDLINCL=
-	;;
-  ,no*,no,*)
-	AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together])
-	;;
-  *)	with_included_ltdl=no
-	LIBLTDL="-L$with_ltdl_lib -lltdl"
-	LTDLDEPS=
-	LTDLINCL="-I$with_ltdl_include"
-	;;
-esac
-INCLTDL="$LTDLINCL"
-
-# Report our decision...
-AC_MSG_CHECKING([where to find libltdl headers])
-AC_MSG_RESULT([$LTDLINCL])
-AC_MSG_CHECKING([where to find libltdl library])
-AC_MSG_RESULT([$LIBLTDL])
-
-_LTDL_SETUP
-
-dnl restore autoconf definition.
-m4_popdef([AC_LIBOBJ])
-m4_popdef([AC_LIBSOURCES])
-
-AC_CONFIG_COMMANDS_PRE([
-    _ltdl_libobjs=
-    _ltdl_ltlibobjs=
-    if test -n "$_LT_LIBOBJS"; then
-      # Remove the extension.
-      _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
-      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
-        _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
-        _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
-      done
-    fi
-    AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs])
-    AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs])
-])
-
-# Only expand once:
-m4_define([LTDL_INIT])
-])# LTDL_INIT
-
-# Old names:
-AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)])
-AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)])
-AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIB_LTDL], [])
-dnl AC_DEFUN([AC_WITH_LTDL], [])
-dnl AC_DEFUN([LT_WITH_LTDL], [])
-
-
-# _LTDL_SETUP
-# -----------
-# Perform all the checks necessary for compilation of the ltdl objects
-#  -- including compiler checks and header checks.  This is a public
-# interface  mainly for the benefit of libltdl's own configure.ac, most
-# other users should call LTDL_INIT instead.
-AC_DEFUN([_LTDL_SETUP],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_SYS_MODULE_EXT])dnl
-AC_REQUIRE([LT_SYS_MODULE_PATH])dnl
-AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl
-AC_REQUIRE([LT_LIB_DLLOAD])dnl
-AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
-AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl
-AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl
-AC_REQUIRE([gl_FUNC_ARGZ])dnl
-
-m4_require([_LT_CHECK_OBJDIR])dnl
-m4_require([_LT_HEADER_DLFCN])dnl
-m4_require([_LT_CHECK_DLPREOPEN])dnl
-m4_require([_LT_DECL_SED])dnl
-
-dnl Don't require this, or it will be expanded earlier than the code
-dnl that sets the variables it relies on:
-_LT_ENABLE_INSTALL
-
-dnl _LTDL_MODE specific code must be called at least once:
-_LTDL_MODE_DISPATCH
-
-# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS
-# the user used.  This is so that ltdl.h can pick up the parent projects
-# config.h file, The first file in AC_CONFIG_HEADERS must contain the
-# definitions required by ltdl.c.
-# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility).
-AC_CONFIG_COMMANDS_PRE([dnl
-m4_pattern_allow([^LT_CONFIG_H$])dnl
-m4_ifset([AH_HEADER],
-    [LT_CONFIG_H=AH_HEADER],
-    [m4_ifset([AC_LIST_HEADERS],
-	    [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[      ]]*,,;s,[[ :]].*$,,'`],
-	[])])])
-AC_SUBST([LT_CONFIG_H])
-
-AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h],
-	[], [], [AC_INCLUDES_DEFAULT])
-
-AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])])
-AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])])
-
-m4_pattern_allow([LT_LIBEXT])dnl
-AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension])
-
-name=
-eval "lt_libprefix=\"$libname_spec\""
-m4_pattern_allow([LT_LIBPREFIX])dnl
-AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix])
-
-name=ltdl
-eval "LTDLOPEN=\"$libname_spec\""
-AC_SUBST([LTDLOPEN])
-])# _LTDL_SETUP
-
-
-# _LT_ENABLE_INSTALL
-# ------------------
-m4_define([_LT_ENABLE_INSTALL],
-[AC_ARG_ENABLE([ltdl-install],
-    [AS_HELP_STRING([--enable-ltdl-install], [install libltdl])])
-
-case ,${enable_ltdl_install},${enable_ltdl_convenience} in
-  *yes*) ;;
-  *) enable_ltdl_convenience=yes ;;
-esac
-
-m4_ifdef([AM_CONDITIONAL],
-[AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
- AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)])
-])# _LT_ENABLE_INSTALL
-
-
-# LT_SYS_DLOPEN_DEPLIBS
-# ---------------------
-AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
-  [lt_cv_sys_dlopen_deplibs],
-  [# PORTME does your system automatically load deplibs for dlopen?
-  # or its logical equivalent (e.g. shl_load for HP-UX < 11)
-  # For now, we just catch OSes we know something about -- in the
-  # future, we'll try test this programmatically.
-  lt_cv_sys_dlopen_deplibs=unknown
-  case $host_os in
-  aix3*|aix4.1.*|aix4.2.*)
-    # Unknown whether this is true for these versions of AIX, but
-    # we want this `case' here to explicitly catch those versions.
-    lt_cv_sys_dlopen_deplibs=unknown
-    ;;
-  aix[[4-9]]*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  amigaos*)
-    case $host_cpu in
-    powerpc)
-      lt_cv_sys_dlopen_deplibs=no
-      ;;
-    esac
-    ;;
-  darwin*)
-    # Assuming the user has installed a libdl from somewhere, this is true
-    # If you are looking for one http://www.opendarwin.org/projects/dlcompat
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  freebsd* | dragonfly*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
-    # GNU and its variants, using gnu ld.so (Glibc)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  hpux10*|hpux11*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  interix*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  irix[[12345]]*|irix6.[[01]]*)
-    # Catch all versions of IRIX before 6.2, and indicate that we don't
-    # know how it worked for any of those versions.
-    lt_cv_sys_dlopen_deplibs=unknown
-    ;;
-  irix*)
-    # The case above catches anything before 6.2, and it's known that
-    # at 6.2 and later dlopen does load deplibs.
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  netbsd*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  openbsd*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  osf[[1234]]*)
-    # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
-    # it did *not* use an RPATH in a shared library to find objects the
-    # library depends on, so we explicitly say `no'.
-    lt_cv_sys_dlopen_deplibs=no
-    ;;
-  osf5.0|osf5.0a|osf5.1)
-    # dlopen *does* load deplibs and with the right loader patch applied
-    # it even uses RPATH in a shared library to search for shared objects
-    # that the library depends on, but there's no easy way to know if that
-    # patch is installed.  Since this is the case, all we can really
-    # say is unknown -- it depends on the patch being installed.  If
-    # it is, this changes to `yes'.  Without it, it would be `no'.
-    lt_cv_sys_dlopen_deplibs=unknown
-    ;;
-  osf*)
-    # the two cases above should catch all versions of osf <= 5.1.  Read
-    # the comments above for what we know about them.
-    # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
-    # is used to find them so we can finally say `yes'.
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  qnx*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  solaris*)
-    lt_cv_sys_dlopen_deplibs=yes
-    ;;
-  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-    libltdl_cv_sys_dlopen_deplibs=yes
-    ;;
-  esac
-  ])
-if test "$lt_cv_sys_dlopen_deplibs" != yes; then
- AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
-    [Define if the OS needs help to load dependent libraries for dlopen().])
-fi
-])# LT_SYS_DLOPEN_DEPLIBS
-
-# Old name:
-AU_ALIAS([AC_LTDL_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [])
-
-
-# LT_SYS_MODULE_EXT
-# -----------------
-AC_DEFUN([LT_SYS_MODULE_EXT],
-[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
-AC_CACHE_CHECK([which extension is used for runtime loadable modules],
-  [libltdl_cv_shlibext],
-[
-module=yes
-eval libltdl_cv_shlibext=$shrext_cmds
-  ])
-if test -n "$libltdl_cv_shlibext"; then
-  m4_pattern_allow([LT_MODULE_EXT])dnl
-  AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"],
-    [Define to the extension used for runtime loadable modules, say, ".so".])
-fi
-])# LT_SYS_MODULE_EXT
-
-# Old name:
-AU_ALIAS([AC_LTDL_SHLIBEXT], [LT_SYS_MODULE_EXT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_SHLIBEXT], [])
-
-
-# LT_SYS_MODULE_PATH
-# ------------------
-AC_DEFUN([LT_SYS_MODULE_PATH],
-[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
-AC_CACHE_CHECK([which variable specifies run-time module search path],
-  [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"])
-if test -n "$lt_cv_module_path_var"; then
-  m4_pattern_allow([LT_MODULE_PATH_VAR])dnl
-  AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"],
-    [Define to the name of the environment variable that determines the run-time module search path.])
-fi
-])# LT_SYS_MODULE_PATH
-
-# Old name:
-AU_ALIAS([AC_LTDL_SHLIBPATH], [LT_SYS_MODULE_PATH])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_SHLIBPATH], [])
-
-
-# LT_SYS_DLSEARCH_PATH
-# --------------------
-AC_DEFUN([LT_SYS_DLSEARCH_PATH],
-[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
-AC_CACHE_CHECK([for the default library search path],
-  [lt_cv_sys_dlsearch_path],
-  [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"])
-if test -n "$lt_cv_sys_dlsearch_path"; then
-  sys_dlsearch_path=
-  for dir in $lt_cv_sys_dlsearch_path; do
-    if test -z "$sys_dlsearch_path"; then
-      sys_dlsearch_path="$dir"
-    else
-      sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir"
-    fi
-  done
-  m4_pattern_allow([LT_DLSEARCH_PATH])dnl
-  AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"],
-    [Define to the system default library search path.])
-fi
-])# LT_SYS_DLSEARCH_PATH
-
-# Old name:
-AU_ALIAS([AC_LTDL_SYSSEARCHPATH], [LT_SYS_DLSEARCH_PATH])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [])
-
-
-# _LT_CHECK_DLPREOPEN
-# -------------------
-m4_defun([_LT_CHECK_DLPREOPEN],
-[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
-  [libltdl_cv_preloaded_symbols],
-  [if test -n "$lt_cv_sys_global_symbol_pipe"; then
-    libltdl_cv_preloaded_symbols=yes
-  else
-    libltdl_cv_preloaded_symbols=no
-  fi
-  ])
-if test x"$libltdl_cv_preloaded_symbols" = xyes; then
-  AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1],
-    [Define if libtool can extract symbol lists from object files.])
-fi
-])# _LT_CHECK_DLPREOPEN
-
-
-# LT_LIB_DLLOAD
-# -------------
-AC_DEFUN([LT_LIB_DLLOAD],
-[m4_pattern_allow([^LT_DLLOADERS$])
-LT_DLLOADERS=
-AC_SUBST([LT_DLLOADERS])
-
-AC_LANG_PUSH([C])
-
-LIBADD_DLOPEN=
-AC_SEARCH_LIBS([dlopen], [dl],
-	[AC_DEFINE([HAVE_LIBDL], [1],
-		   [Define if you have the libdl library or equivalent.])
-	if test "$ac_cv_search_dlopen" != "none required" ; then
-	  LIBADD_DLOPEN="-ldl"
-	fi
-	libltdl_cv_lib_dl_dlopen="yes"
-	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
-    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H
-#  include <dlfcn.h>
-#endif
-    ]], [[dlopen(0, 0);]])],
-	    [AC_DEFINE([HAVE_LIBDL], [1],
-		       [Define if you have the libdl library or equivalent.])
-	    libltdl_cv_func_dlopen="yes"
-	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
-	[AC_CHECK_LIB([svld], [dlopen],
-		[AC_DEFINE([HAVE_LIBDL], [1],
-			 [Define if you have the libdl library or equivalent.])
-	        LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes"
-		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])])
-if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
-then
-  lt_save_LIBS="$LIBS"
-  LIBS="$LIBS $LIBADD_DLOPEN"
-  AC_CHECK_FUNCS([dlerror])
-  LIBS="$lt_save_LIBS"
-fi
-AC_SUBST([LIBADD_DLOPEN])
-
-LIBADD_SHL_LOAD=
-AC_CHECK_FUNC([shl_load],
-	[AC_DEFINE([HAVE_SHL_LOAD], [1],
-		   [Define if you have the shl_load function.])
-	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"],
-    [AC_CHECK_LIB([dld], [shl_load],
-	    [AC_DEFINE([HAVE_SHL_LOAD], [1],
-		       [Define if you have the shl_load function.])
-	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
-	    LIBADD_SHL_LOAD="-ldld"])])
-AC_SUBST([LIBADD_SHL_LOAD])
-
-case $host_os in
-darwin[[1567]].*)
-# We only want this for pre-Mac OS X 10.4.
-  AC_CHECK_FUNC([_dyld_func_lookup],
-	[AC_DEFINE([HAVE_DYLD], [1],
-		   [Define if you have the _dyld_func_lookup function.])
-	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"])
-  ;;
-beos*)
-  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la"
-  ;;
-cygwin* | mingw* | os2* | pw32*)
-  AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include <sys/cygwin.h>]])
-  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la"
-  ;;
-esac
-
-AC_CHECK_LIB([dld], [dld_link],
-	[AC_DEFINE([HAVE_DLD], [1],
-		   [Define if you have the GNU dld library.])
-		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"])
-AC_SUBST([LIBADD_DLD_LINK])
-
-m4_pattern_allow([^LT_DLPREOPEN$])
-LT_DLPREOPEN=
-if test -n "$LT_DLLOADERS"
-then
-  for lt_loader in $LT_DLLOADERS; do
-    LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader "
-  done
-  AC_DEFINE([HAVE_LIBDLLOADER], [1],
-            [Define if libdlloader will be built on this platform])
-fi
-AC_SUBST([LT_DLPREOPEN])
-
-dnl This isn't used anymore, but set it for backwards compatibility
-LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD"
-AC_SUBST([LIBADD_DL])
-
-AC_LANG_POP
-])# LT_LIB_DLLOAD
-
-# Old name:
-AU_ALIAS([AC_LTDL_DLLIB], [LT_LIB_DLLOAD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_DLLIB], [])
-
-
-# LT_SYS_SYMBOL_USCORE
-# --------------------
-# does the compiler prefix global symbols with an underscore?
-AC_DEFUN([LT_SYS_SYMBOL_USCORE],
-[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-AC_CACHE_CHECK([for _ prefix in compiled symbols],
-  [lt_cv_sys_symbol_underscore],
-  [lt_cv_sys_symbol_underscore=no
-  cat > conftest.$ac_ext <<_LT_EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-_LT_EOF
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    ac_nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-      # See whether the symbols have a leading underscore.
-      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
-        lt_cv_sys_symbol_underscore=yes
-      else
-        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
-	  :
-        else
-	  echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD
-        fi
-      fi
-    else
-      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.c >&AS_MESSAGE_LOG_FD
-  fi
-  rm -rf conftest*
-  ])
-  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
-  AC_SUBST([sys_symbol_underscore])
-])# LT_SYS_SYMBOL_USCORE
-
-# Old name:
-AU_ALIAS([AC_LTDL_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [])
-
-
-# LT_FUNC_DLSYM_USCORE
-# --------------------
-AC_DEFUN([LT_FUNC_DLSYM_USCORE],
-[AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
-if test x"$lt_cv_sys_symbol_underscore" = xyes; then
-  if test x"$libltdl_cv_func_dlopen" = xyes ||
-     test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
-	AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
-	  [libltdl_cv_need_uscore],
-	  [libltdl_cv_need_uscore=unknown
-          save_LIBS="$LIBS"
-          LIBS="$LIBS $LIBADD_DLOPEN"
-	  _LT_TRY_DLOPEN_SELF(
-	    [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
-	    [],				 [libltdl_cv_need_uscore=cross])
-	  LIBS="$save_LIBS"
-	])
-  fi
-fi
-
-if test x"$libltdl_cv_need_uscore" = xyes; then
-  AC_DEFINE([NEED_USCORE], [1],
-    [Define if dlsym() requires a leading underscore in symbol names.])
-fi
-])# LT_FUNC_DLSYM_USCORE
-
-# Old name:
-AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# Figure out how to run the assembler.                      -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_PROG_AS
-# ----------
-AC_DEFUN([AM_PROG_AS],
-[# By default we simply use the C compiler to build assembly code.
-AC_REQUIRE([AC_PROG_CC])
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-AC_ARG_VAR([CCAS],      [assembler compiler command (defaults to CC)])
-AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
-_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
-])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well.  Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
-       [enable], [m4_define([am_maintainer_other], [disable])],
-       [disable], [m4_define([am_maintainer_other], [enable])],
-       [m4_define([am_maintainer_other], [enable])
-        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
-  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
-  AC_ARG_ENABLE([maintainer-mode],
-[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      [USE_MAINTAINER_MODE=$enableval],
-      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST([MAINT])dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_PROG_CC_C_O
-# --------------
-# Like AC_PROG_CC_C_O, but changed for automake.
-AC_DEFUN([AM_PROG_CC_C_O],
-[AC_REQUIRE([AC_PROG_CC_C_O])dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([compile])dnl
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-dnl Make sure AC_PROG_CC is never called again, or it will override our
-dnl setting of CC.
-m4_define([AC_PROG_CC],
-          [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/ax_cc_maxopt.m4])
-m4_include([m4/ax_cflags_warn_all.m4])
-m4_include([m4/ax_check_compiler_flags.m4])
-m4_include([m4/ax_compiler_vendor.m4])
-m4_include([m4/ax_configure_args.m4])
-m4_include([m4/ax_enable_builddir.m4])
-m4_include([m4/ax_gcc_archflag.m4])
-m4_include([m4/ax_gcc_x86_cpuid.m4])
-m4_include([m4/libtool.m4])
-m4_include([m4/ltoptions.m4])
-m4_include([m4/ltsugar.m4])
-m4_include([m4/ltversion.m4])
-m4_include([m4/lt~obsolete.m4])
-m4_include([acinclude.m4])