ceedling 0.9.0 → 1.0.1

data/vendor/unity/examples/example_4/test/TestProductionCode.c

@@ -0,0 +1,69 @@
+/* =========================================================================
+    Unity - A Test Framework for C
+    ThrowTheSwitch.org
+    Copyright (c) 2007-25 Mike Karlesky, Mark VanderVoord, & Greg Williams
+    SPDX-License-Identifier: MIT
+========================================================================= */
+
+#include "ProductionCode.h"
+#include "unity.h"
+
+/* sometimes you may want to get at local data in a module.
+ * for example: If you plan to pass by reference, this could be useful
+ * however, it should often be avoided */
+extern int Counter;
+
+void setUp(void)
+{
+  /* This is run before EACH TEST */
+  Counter = 0x5a5a;
+}
+
+void tearDown(void)
+{
+}
+
+
+void test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode(void)
+{
+  /* All of these should pass */
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(78));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(2));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(33));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(999));
+  TEST_ASSERT_EQUAL(0, FindFunction_WhichIsBroken(-1));
+}
+
+void test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken(void)
+{
+  /* You should see this line fail in your test summary */
+  TEST_ASSERT_EQUAL(1, FindFunction_WhichIsBroken(34));
+
+  /* Notice the rest of these didn't get a chance to run because the line above failed.
+   * Unit tests abort each test function on the first sign of trouble.
+   * Then NEXT test function runs as normal. */
+  TEST_ASSERT_EQUAL(8, FindFunction_WhichIsBroken(8888));
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue(void)
+{
+    /* This should be true because setUp set this up for us before this test */
+    TEST_ASSERT_EQUAL_HEX(0x5a5a, FunctionWhichReturnsLocalVariable());
+
+    /* This should be true because we can still change our answer */
+    Counter = 0x1234;
+    TEST_ASSERT_EQUAL_HEX(0x1234, FunctionWhichReturnsLocalVariable());
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain(void)
+{
+    /* This should be true again because setup was rerun before this test (and after we changed it to 0x1234) */
+    TEST_ASSERT_EQUAL_HEX(0x5a5a, FunctionWhichReturnsLocalVariable());
+}
+
+void test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed(void)
+{
+    /* Sometimes you get the test wrong.  When that happens, you get a failure too... and a quick look should tell
+     * you what actually happened...which in this case was a failure to setup the initial condition. */
+    TEST_ASSERT_EQUAL_HEX(0x1234, FunctionWhichReturnsLocalVariable());
+}

data/vendor/unity/examples/example_4/test/TestProductionCode2.c

@@ -0,0 +1,41 @@
+/* =========================================================================
+    Unity - A Test Framework for C
+    ThrowTheSwitch.org
+    Copyright (c) 2007-25 Mike Karlesky, Mark VanderVoord, & Greg Williams
+    SPDX-License-Identifier: MIT
+========================================================================= */
+
+#include "ProductionCode2.h"
+#include "unity.h"
+
+/* These should be ignored because they are commented out in various ways:
+#include "whatever.h" 
+#include "somethingelse.h"
+*/
+
+void setUp(void)
+{
+}
+
+void tearDown(void)
+{
+}
+
+void test_IgnoredTest(void);
+void test_AnotherIgnoredTest(void);
+void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void);
+
+void test_IgnoredTest(void)
+{
+    TEST_IGNORE_MESSAGE("This Test Was Ignored On Purpose");
+}
+
+void test_AnotherIgnoredTest(void)
+{
+    TEST_IGNORE_MESSAGE("These Can Be Useful For Leaving Yourself Notes On What You Need To Do Yet");
+}
+
+void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void)
+{
+    TEST_IGNORE(); /* Like This */
+}

data/vendor/unity/examples/example_4/test/meson.build

@@ -0,0 +1,7 @@
+#
+# build script written by : Michael Brockus.
+# github repo author: Mike Karlesky, Mark VanderVoord, Greg Williams.
+#
+# license: MIT
+#
+subdir('test_runners')

data/vendor/unity/examples/example_4/test/test_runners/TestProductionCode2_Runner.c

@@ -0,0 +1,53 @@
+/* AUTOGENERATED FILE. DO NOT EDIT. */
+
+/*=======Test Runner Used To Run Each Test Below=====*/
+#define RUN_TEST(TestFunc, TestLineNum) \
+{ \
+  Unity.CurrentTestName = #TestFunc; \
+  Unity.CurrentTestLineNumber = TestLineNum; \
+  Unity.NumberOfTests++; \
+  if (TEST_PROTECT()) \
+  { \
+      setUp(); \
+      TestFunc(); \
+  } \
+  if (TEST_PROTECT()) \
+  { \
+    tearDown(); \
+  } \
+  UnityConcludeTest(); \
+}
+
+/*=======Automagically Detected Files To Include=====*/
+#include "unity.h"
+#include <setjmp.h>
+#include <stdio.h>
+#include "ProductionCode2.h"
+
+/*=======External Functions This Runner Calls=====*/
+extern void setUp(void);
+extern void tearDown(void);
+extern void test_IgnoredTest(void);
+extern void test_AnotherIgnoredTest(void);
+extern void test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented(void);
+
+
+/*=======Test Reset Option=====*/
+void resetTest(void);
+void resetTest(void)
+{
+  tearDown();
+  setUp();
+}
+
+
+/*=======MAIN=====*/
+int main(void)
+{
+  UnityBegin("test/TestProductionCode2.c");
+  RUN_TEST(test_IgnoredTest, 18);
+  RUN_TEST(test_AnotherIgnoredTest, 23);
+  RUN_TEST(test_ThisFunctionHasNotBeenTested_NeedsToBeImplemented, 28);
+
+  return (UnityEnd());
+}

data/vendor/unity/examples/example_4/test/test_runners/TestProductionCode_Runner.c

@@ -0,0 +1,57 @@
+/* AUTOGENERATED FILE. DO NOT EDIT. */
+
+/*=======Test Runner Used To Run Each Test Below=====*/
+#define RUN_TEST(TestFunc, TestLineNum) \
+{ \
+  Unity.CurrentTestName = #TestFunc; \
+  Unity.CurrentTestLineNumber = TestLineNum; \
+  Unity.NumberOfTests++; \
+  if (TEST_PROTECT()) \
+  { \
+      setUp(); \
+      TestFunc(); \
+  } \
+  if (TEST_PROTECT()) \
+  { \
+    tearDown(); \
+  } \
+  UnityConcludeTest(); \
+}
+
+/*=======Automagically Detected Files To Include=====*/
+#include "unity.h"
+#include <setjmp.h>
+#include <stdio.h>
+#include "ProductionCode.h"
+
+/*=======External Functions This Runner Calls=====*/
+extern void setUp(void);
+extern void tearDown(void);
+extern void test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode(void);
+extern void test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain(void);
+extern void test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed(void);
+
+
+/*=======Test Reset Option=====*/
+void resetTest(void);
+void resetTest(void)
+{
+  tearDown();
+  setUp();
+}
+
+
+/*=======MAIN=====*/
+int main(void)
+{
+  UnityBegin("test/TestProductionCode.c");
+  RUN_TEST(test_FindFunction_WhichIsBroken_ShouldReturnZeroIfItemIsNotInList_WhichWorksEvenInOurBrokenCode, 20);
+  RUN_TEST(test_FindFunction_WhichIsBroken_ShouldReturnTheIndexForItemsInList_WhichWillFailBecauseOurFunctionUnderTestIsBroken, 30);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValue, 41);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnTheCurrentCounterValueAgain, 51);
+  RUN_TEST(test_FunctionWhichReturnsLocalVariable_ShouldReturnCurrentCounter_ButFailsBecauseThisTestIsActuallyFlawed, 57);
+
+  return (UnityEnd());
+}

data/vendor/unity/examples/example_4/test/test_runners/meson.build

@@ -0,0 +1,13 @@
+#
+# build script written by : Michael Brockus.
+# github repo author: Mike Karlesky, Mark VanderVoord, Greg Williams.
+#
+# license: MIT
+#
+cases = [
+          ['TestProductionCode_Runner.c',  join_paths('..' ,'TestProductionCode.c' )],
+          ['TestProductionCode2_Runner.c', join_paths('..' ,'TestProductionCode2.c')]
+        ]
+
+test('01-test-case', executable('01-test-case', cases[0], dependencies: [ a_dep, unity_dep ]))
+test('02-test-case', executable('02-test-case', cases[1], dependencies: [ b_dep, unity_dep ]))

data/vendor/unity/examples/unity_config.h

@@ -0,0 +1,251 @@
+/* =========================================================================
+    Unity - A Test Framework for C
+    ThrowTheSwitch.org
+    Copyright (c) 2007-25 Mike Karlesky, Mark VanderVoord, & Greg Williams
+    SPDX-License-Identifier: MIT
+========================================================================= */
+
+/* Unity Configuration
+ * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529
+ * Update: December 29th, 2016
+ * See Also: Unity/docs/UnityConfigurationGuide.pdf
+ *
+ * Unity is designed to run on almost anything that is targeted by a C compiler.
+ * It would be awesome if this could be done with zero configuration. While
+ * there are some targets that come close to this dream, it is sadly not
+ * universal. It is likely that you are going to need at least a couple of the
+ * configuration options described in this document.
+ *
+ * All of Unity's configuration options are `#defines`. Most of these are simple
+ * definitions. A couple are macros with arguments. They live inside the
+ * unity_internals.h header file. We don't necessarily recommend opening that
+ * file unless you really need to. That file is proof that a cross-platform
+ * library is challenging to build. From a more positive perspective, it is also
+ * proof that a great deal of complexity can be centralized primarily to one
+ * place in order to provide a more consistent and simple experience elsewhere.
+ *
+ * Using These Options
+ * It doesn't matter if you're using a target-specific compiler and a simulator
+ * or a native compiler. In either case, you've got a couple choices for
+ * configuring these options:
+ *
+ *  1. Because these options are specified via C defines, you can pass most of
+ *     these options to your compiler through command line compiler flags. Even
+ *     if you're using an embedded target that forces you to use their
+ *     overbearing IDE for all configuration, there will be a place somewhere in
+ *     your project to configure defines for your compiler.
+ *  2. You can create a custom `unity_config.h` configuration file (present in
+ *     your toolchain's search paths). In this file, you will list definitions
+ *     and macros specific to your target. All you must do is define
+ *     `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any
+ *     further definitions it may need.
+ */
+
+#ifndef UNITY_CONFIG_H
+#define UNITY_CONFIG_H
+
+/* ************************* AUTOMATIC INTEGER TYPES ***************************
+ * C's concept of an integer varies from target to target. The C Standard has
+ * rules about the `int` matching the register size of the target
+ * microprocessor. It has rules about the `int` and how its size relates to
+ * other integer types. An `int` on one target might be 16 bits while on another
+ * target it might be 64. There are more specific types in compilers compliant
+ * with C99 or later, but that's certainly not every compiler you are likely to
+ * encounter. Therefore, Unity has a number of features for helping to adjust
+ * itself to match your required integer sizes. It starts off by trying to do it
+ * automatically.
+ **************************************************************************** */
+
+/* The first attempt to guess your types is to check `limits.h`. Some compilers
+ * that don't support `stdint.h` could include `limits.h`. If you don't
+ * want Unity to check this file, define this to make it skip the inclusion.
+ * Unity looks at UINT_MAX & ULONG_MAX, which were available since C89.
+ */
+/* #define UNITY_EXCLUDE_LIMITS_H */
+
+/* The second thing that Unity does to guess your types is check `stdint.h`.
+ * This file defines `UINTPTR_MAX`, since C99, that Unity can make use of to
+ * learn about your system. It's possible you don't want it to do this or it's
+ * possible that your system doesn't support `stdint.h`. If that's the case,
+ * you're going to want to define this. That way, Unity will know to skip the
+ * inclusion of this file and you won't be left with a compiler error.
+ */
+/* #define UNITY_EXCLUDE_STDINT_H */
+
+/* ********************** MANUAL INTEGER TYPE DEFINITION ***********************
+ * If you've disabled all of the automatic options above, you're going to have
+ * to do the configuration yourself. There are just a handful of defines that
+ * you are going to specify if you don't like the defaults.
+ **************************************************************************** */
+
+ /* Define this to be the number of bits an `int` takes up on your system. The
+ * default, if not auto-detected, is 32 bits.
+ *
+ * Example:
+ */
+/* #define UNITY_INT_WIDTH 16 */
+
+/* Define this to be the number of bits a `long` takes up on your system. The
+ * default, if not autodetected, is 32 bits. This is used to figure out what
+ * kind of 64-bit support your system can handle.  Does it need to specify a
+ * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option
+ * is going to be ignored.
+ *
+ * Example:
+ */
+/* #define UNITY_LONG_WIDTH 16 */
+
+/* Define this to be the number of bits a pointer takes up on your system. The
+ * default, if not autodetected, is 32-bits. If you're getting ugly compiler
+ * warnings about casting from pointers, this is the one to look at.
+ *
+ * Example:
+ */
+/* #define UNITY_POINTER_WIDTH 64 */
+
+/* Unity will automatically include 64-bit support if it auto-detects it, or if
+ * your `int`, `long`, or pointer widths are greater than 32-bits. Define this
+ * to enable 64-bit support if none of the other options already did it for you.
+ * There can be a significant size and speed impact to enabling 64-bit support
+ * on small targets, so don't define it if you don't need it.
+ */
+/* #define UNITY_SUPPORT_64 */
+
+
+/* *************************** FLOATING POINT TYPES ****************************
+ * In the embedded world, it's not uncommon for targets to have no support for
+ * floating point operations at all or to have support that is limited to only
+ * single precision. We are able to guess integer sizes on the fly because
+ * integers are always available in at least one size. Floating point, on the
+ * other hand, is sometimes not available at all. Trying to include `float.h` on
+ * these platforms would result in an error. This leaves manual configuration as
+ * the only option.
+ **************************************************************************** */
+
+ /* By default, Unity guesses that you will want single precision floating point
+  * support, but not double precision. It's easy to change either of these using
+  * the include and exclude options here. You may include neither, just float,
+  * or both, as suits your needs.
+  */
+/* #define UNITY_EXCLUDE_FLOAT  */
+/* #define UNITY_INCLUDE_DOUBLE */
+/* #define UNITY_EXCLUDE_DOUBLE */
+
+/* For features that are enabled, the following floating point options also
+ * become available.
+ */
+
+/* Unity aims for as small of a footprint as possible and avoids most standard
+ * library calls (some embedded platforms don't have a standard library!).
+ * Because of this, its routines for printing integer values are minimalist and
+ * hand-coded. To keep Unity universal, though, we eventually chose to develop
+ * our own floating point print routines. Still, the display of floating point
+ * values during a failure are optional. By default, Unity will print the
+ * actual results of floating point assertion failures. So a failed assertion
+ * will produce a message like "Expected 4.0 Was 4.25". If you would like less
+ * verbose failure messages for floating point assertions, use this option to
+ * give a failure message `"Values Not Within Delta"` and trim the binary size.
+ */
+/* #define UNITY_EXCLUDE_FLOAT_PRINT */
+
+/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C
+ * floats. If your compiler supports a specialty floating point type, you can
+ * always override this behavior by using this definition.
+ *
+ * Example:
+ */
+/* #define UNITY_FLOAT_TYPE float16_t */
+
+/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard
+ * C doubles. If you would like to change this, you can specify something else
+ * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long
+ * double` could enable gargantuan floating point types on your 64-bit processor
+ * instead of the standard `double`.
+ *
+ * Example:
+ */
+/* #define UNITY_DOUBLE_TYPE long double */
+
+/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as
+ * documented in the Unity Assertion Guide, you will learn that they are not
+ * really asserting that two values are equal but rather that two values are
+ * "close enough" to equal. "Close enough" is controlled by these precision
+ * configuration options. If you are working with 32-bit floats and/or 64-bit
+ * doubles (the normal on most processors), you should have no need to change
+ * these options. They are both set to give you approximately 1 significant bit
+ * in either direction. The float precision is 0.00001 while the double is
+ * 10^-12. For further details on how this works, see the appendix of the Unity
+ * Assertion Guide.
+ *
+ * Example:
+ */
+/* #define UNITY_FLOAT_PRECISION 0.001f  */
+/* #define UNITY_DOUBLE_PRECISION 0.001f */
+
+
+/* *************************** MISCELLANEOUS ***********************************
+ * Miscellaneous configuration options for Unity
+ **************************************************************************** */
+
+/* Unity uses the stddef.h header included in the C standard library for the
+ * "NULL" macro. Define this in order to disable the include of stddef.h. If you
+ * do this, you have to make sure to provide your own "NULL" definition.
+ */
+/* #define UNITY_EXCLUDE_STDDEF_H */
+
+/* Define this to enable the unity formatted print macro:
+ * "TEST_PRINTF"
+ */
+/* #define UNITY_INCLUDE_PRINT_FORMATTED */
+
+
+/* *************************** TOOLSET CUSTOMIZATION ***************************
+ * In addition to the options listed above, there are a number of other options
+ * which will come in handy to customize Unity's behavior for your specific
+ * toolchain. It is possible that you may not need to touch any of these but
+ * certain platforms, particularly those running in simulators, may need to jump
+ * through extra hoops to operate properly. These macros will help in those
+ * situations.
+ **************************************************************************** */
+
+/* By default, Unity prints its results to `stdout` as it runs. This works
+ * perfectly fine in most situations where you are using a native compiler for
+ * testing. It works on some simulators as well so long as they have `stdout`
+ * routed back to the command line. There are times, however, where the
+ * simulator will lack support for dumping results or you will want to route
+ * results elsewhere for other reasons. In these cases, you should define the
+ * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time
+ * (as an `int`, since this is the parameter type of the standard C `putchar`
+ * function most commonly used). You may replace this with whatever function
+ * call you like.
+ *
+ * Example:
+ * Say you are forced to run your test suite on an embedded processor with no
+ * `stdout` option. You decide to route your test result output to a custom
+ * serial `RS232_putc()` function you wrote like thus:
+ */
+/* #define UNITY_OUTPUT_CHAR(a)                    RS232_putc(a) */
+/* #define UNITY_OUTPUT_CHAR_HEADER_DECLARATION    RS232_putc(int) */
+/* #define UNITY_OUTPUT_FLUSH()                    RS232_flush() */
+/* #define UNITY_OUTPUT_FLUSH_HEADER_DECLARATION   RS232_flush(void) */
+/* #define UNITY_OUTPUT_START()                    RS232_config(115200,1,8,0) */
+/* #define UNITY_OUTPUT_COMPLETE()                 RS232_close() */
+
+/* Some compilers require a custom attribute to be assigned to pointers, like
+ * `near` or `far`. In these cases, you can give Unity a safe default for these
+ * by defining this option with the attribute you would like.
+ *
+ * Example:
+ */
+/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */
+/* #define UNITY_PTR_ATTRIBUTE near */
+
+/* Print execution time of each test when executed in verbose mode
+ *
+ * Example:
+ *
+ * TEST - PASS (10 ms)
+ */
+/* #define UNITY_INCLUDE_EXEC_TIME */
+
+#endif /* UNITY_CONFIG_H */

data/vendor/unity/extras/bdd/readme.md

@@ -0,0 +1,40 @@
+# Unity Project - BDD Feature
+
+Unity's Behavior-Driven Development (BDD) test feature. It allows developers to structure and describe various phases (Given, When, Then) of a test scenario in a BDD-style format.
+
+## Introduction
+
+This project is based on the Unity framework originally created by Mike Karlesky, Mark VanderVoord, and Greg Williams in 2007. The project extends Unity by providing macros to define BDD structures with descriptive elements. Feature added by Michael Gene Brockus (Dreamer).
+
+## License
+
+This project is distributed under the MIT License. See the [license.txt](license.txt) file for more information.
+
+## Usage
+
+### BDD Macros
+
+The provided BDD macros allow you to structure your test scenarios in a descriptive manner. These macros are for descriptive purposes only and do not have functional behavior.
+
+- `GIVEN(description)`: Describes the "Given" phase of a test scenario.
+- `WHEN(description)`: Describes the "When" phase of a test scenario.
+- `THEN(description)`: Describes the "Then" phase of a test scenario.
+
+Example usage:
+
+```c
+GIVEN("a valid input") {
+    // Test setup and context
+    // ...
+
+    WHEN("the input is processed") {
+        // Perform the action
+        // ...
+
+        THEN("the expected outcome occurs") {
+            // Assert the outcome
+            // ...
+        }
+    }
+}
+```

data/vendor/unity/extras/bdd/src/unity_bdd.h

@@ -0,0 +1,44 @@
+/* =========================================================================
+    Unity - A Test Framework for C
+    ThrowTheSwitch.org
+    Copyright (c) 2007-25 Mike Karlesky, Mark VanderVoord, & Greg Williams
+    SPDX-License-Identifier: MIT
+========================================================================= */
+
+#ifndef UNITY_BDD_TEST_H_
+#define UNITY_BDD_TEST_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#include <stdio.h>
+
+/**
+ * @brief Macros for defining a Behavior-Driven Development (BDD) structure with descriptions.
+ *
+ * These macros provide a way to structure and describe different phases (Given, When, Then) of a
+ * test scenario in a BDD-style format. However, they don't have functional behavior by themselves
+ * and are used for descriptive purposes.
+ */
+#define GIVEN(description) \
+    if (0) { \
+        printf("Given %s\n", description); \
+    } else
+
+#define WHEN(description) \
+    if (0) { \
+        printf("When %s\n", description); \
+    } else
+
+#define THEN(description) \
+    if (0) { \
+        printf("Then %s\n", description); \
+    } else
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif 

data/vendor/unity/extras/bdd/test/meson.build

@@ -0,0 +1,9 @@
+project('BDD Tester', 'c')
+
+# Add Unity as a dependency
+unity_dep = dependency('unity')
+
+# Define your source files
+sources = files('test_bdd.c')
+
+executable('tester', sources, dependencies : unity_dep)