RubyGems - ceedling - Versions diffs - 0.9.0 → 1.0.1 - Mend

ceedling 0.9.0 → 1.0.1

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (1282) hide show

data/vendor/cmock/test/iar/iar_v4/incIAR/ioat91sam7x256.h ADDED Viewed

@@ -0,0 +1,4387 @@
+/* =========================================================================
+    CMock - Automatic Mock Generation for C
+    ThrowTheSwitch.org
+    Copyright (c) 2007-25 Mike Karlesky, Mark VanderVoord, & Greg Williams
+    SPDX-License-Identifier: MIT
+========================================================================= */
+// - ----------------------------------------------------------------------------
+// -          ATMEL Microcontroller Software Support  -  ROUSSET  -
+// - ----------------------------------------------------------------------------
+// -  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// -  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// -  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// -  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// -  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// -  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// -  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// -  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// -  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// -  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// - ----------------------------------------------------------------------------
+// - File Name           : AT91SAM7X256.h
+// - Object              : AT91SAM7X256 definitions
+// - Generated           : AT91 SW Application Group  11/02/2005 (15:17:24)
+// -
+// - CVS Reference       : /AT91SAM7X256.pl/1.14/Tue Sep 13 15:06:52 2005//
+// - CVS Reference       : /SYS_SAM7X.pl/1.3/Tue Feb  1 17:01:43 2005//
+// - CVS Reference       : /MC_SAM7X.pl/1.2/Fri May 20 14:13:04 2005//
+// - CVS Reference       : /PMC_SAM7X.pl/1.4/Tue Feb  8 13:58:10 2005//
+// - CVS Reference       : /RSTC_SAM7X.pl/1.2/Wed Jul 13 14:57:50 2005//
+// - CVS Reference       : /UDP_SAM7X.pl/1.1/Tue May 10 11:35:35 2005//
+// - CVS Reference       : /PWM_SAM7X.pl/1.1/Tue May 10 11:53:07 2005//
+// - CVS Reference       : /AIC_6075B.pl/1.3/Fri May 20 14:01:30 2005//
+// - CVS Reference       : /PIO_6057A.pl/1.2/Thu Feb  3 10:18:28 2005//
+// - CVS Reference       : /RTTC_6081A.pl/1.2/Tue Nov  9 14:43:58 2004//
+// - CVS Reference       : /PITC_6079A.pl/1.2/Tue Nov  9 14:43:56 2004//
+// - CVS Reference       : /WDTC_6080A.pl/1.3/Tue Nov  9 14:44:00 2004//
+// - CVS Reference       : /VREG_6085B.pl/1.1/Tue Feb  1 16:05:48 2005//
+// - CVS Reference       : /PDC_6074C.pl/1.2/Thu Feb  3 08:48:54 2005//
+// - CVS Reference       : /DBGU_6059D.pl/1.1/Mon Jan 31 13:15:32 2005//
+// - CVS Reference       : /SPI_6088D.pl/1.3/Fri May 20 14:08:59 2005//
+// - CVS Reference       : /US_6089C.pl/1.1/Mon Jul 12 18:23:26 2004//
+// - CVS Reference       : /SSC_6078B.pl/1.1/Wed Jul 13 15:19:19 2005//
+// - CVS Reference       : /TWI_6061A.pl/1.1/Tue Jul 13 07:38:06 2004//
+// - CVS Reference       : /TC_6082A.pl/1.7/Fri Mar 11 12:52:17 2005//
+// - CVS Reference       : /CAN_6019B.pl/1.1/Tue Mar  8 12:42:22 2005//
+// - CVS Reference       : /EMACB_6119A.pl/1.6/Wed Jul 13 15:05:35 2005//
+// - CVS Reference       : /ADC_6051C.pl/1.1/Fri Oct 17 09:12:38 2003//
+// - ----------------------------------------------------------------------------
+#ifndef AT91SAM7X256_H
+#define AT91SAM7X256_H
+#ifdef __IAR_SYSTEMS_ICC__
+typedef volatile unsigned int AT91_REG;// Hardware register definition
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Peripherals
+// *****************************************************************************
+typedef struct _AT91S_SYS {
+	AT91_REG	 AIC_SMR[32]; 	// Source Mode Register
+	AT91_REG	 AIC_SVR[32]; 	// Source Vector Register
+	AT91_REG	 AIC_IVR; 	// IRQ Vector Register
+	AT91_REG	 AIC_FVR; 	// FIQ Vector Register
+	AT91_REG	 AIC_ISR; 	// Interrupt Status Register
+	AT91_REG	 AIC_IPR; 	// Interrupt Pending Register
+	AT91_REG	 AIC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 AIC_CISR; 	// Core Interrupt Status Register
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 AIC_IECR; 	// Interrupt Enable Command Register
+	AT91_REG	 AIC_IDCR; 	// Interrupt Disable Command Register
+	AT91_REG	 AIC_ICCR; 	// Interrupt Clear Command Register
+	AT91_REG	 AIC_ISCR; 	// Interrupt Set Command Register
+	AT91_REG	 AIC_EOICR; 	// End of Interrupt Command Register
+	AT91_REG	 AIC_SPU; 	// Spurious Vector Register
+	AT91_REG	 AIC_DCR; 	// Debug Control Register (Protect)
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 AIC_FFER; 	// Fast Forcing Enable Register
+	AT91_REG	 AIC_FFDR; 	// Fast Forcing Disable Register
+	AT91_REG	 AIC_FFSR; 	// Fast Forcing Status Register
+	AT91_REG	 Reserved2[45]; 	//
+	AT91_REG	 DBGU_CR; 	// Control Register
+	AT91_REG	 DBGU_MR; 	// Mode Register
+	AT91_REG	 DBGU_IER; 	// Interrupt Enable Register
+	AT91_REG	 DBGU_IDR; 	// Interrupt Disable Register
+	AT91_REG	 DBGU_IMR; 	// Interrupt Mask Register
+	AT91_REG	 DBGU_CSR; 	// Channel Status Register
+	AT91_REG	 DBGU_RHR; 	// Receiver Holding Register
+	AT91_REG	 DBGU_THR; 	// Transmitter Holding Register
+	AT91_REG	 DBGU_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 Reserved3[7]; 	//
+	AT91_REG	 DBGU_CIDR; 	// Chip ID Register
+	AT91_REG	 DBGU_EXID; 	// Chip ID Extension Register
+	AT91_REG	 DBGU_FNTR; 	// Force NTRST Register
+	AT91_REG	 Reserved4[45]; 	//
+	AT91_REG	 DBGU_RPR; 	// Receive Pointer Register
+	AT91_REG	 DBGU_RCR; 	// Receive Counter Register
+	AT91_REG	 DBGU_TPR; 	// Transmit Pointer Register
+	AT91_REG	 DBGU_TCR; 	// Transmit Counter Register
+	AT91_REG	 DBGU_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 DBGU_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 DBGU_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 DBGU_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 DBGU_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 DBGU_PTSR; 	// PDC Transfer Status Register
+	AT91_REG	 Reserved5[54]; 	//
+	AT91_REG	 PIOA_PER; 	// PIO Enable Register
+	AT91_REG	 PIOA_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOA_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved6[1]; 	//
+	AT91_REG	 PIOA_OER; 	// Output Enable Register
+	AT91_REG	 PIOA_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOA_OSR; 	// Output Status Register
+	AT91_REG	 Reserved7[1]; 	//
+	AT91_REG	 PIOA_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOA_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOA_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved8[1]; 	//
+	AT91_REG	 PIOA_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOA_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOA_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOA_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOA_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOA_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOA_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOA_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOA_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOA_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOA_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved9[1]; 	//
+	AT91_REG	 PIOA_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOA_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOA_PPUSR; 	// Pull-up Status Register
+	AT91_REG	 Reserved10[1]; 	//
+	AT91_REG	 PIOA_ASR; 	// Select A Register
+	AT91_REG	 PIOA_BSR; 	// Select B Register
+	AT91_REG	 PIOA_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved11[9]; 	//
+	AT91_REG	 PIOA_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOA_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOA_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved12[85]; 	//
+	AT91_REG	 PIOB_PER; 	// PIO Enable Register
+	AT91_REG	 PIOB_PDR; 	// PIO Disable Register
+	AT91_REG	 PIOB_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved13[1]; 	//
+	AT91_REG	 PIOB_OER; 	// Output Enable Register
+	AT91_REG	 PIOB_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIOB_OSR; 	// Output Status Register
+	AT91_REG	 Reserved14[1]; 	//
+	AT91_REG	 PIOB_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIOB_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIOB_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved15[1]; 	//
+	AT91_REG	 PIOB_SODR; 	// Set Output Data Register
+	AT91_REG	 PIOB_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIOB_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIOB_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIOB_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIOB_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIOB_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIOB_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIOB_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIOB_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIOB_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved16[1]; 	//
+	AT91_REG	 PIOB_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIOB_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIOB_PPUSR; 	// Pull-up Status Register
+	AT91_REG	 Reserved17[1]; 	//
+	AT91_REG	 PIOB_ASR; 	// Select A Register
+	AT91_REG	 PIOB_BSR; 	// Select B Register
+	AT91_REG	 PIOB_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved18[9]; 	//
+	AT91_REG	 PIOB_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIOB_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIOB_OWSR; 	// Output Write Status Register
+	AT91_REG	 Reserved19[341]; 	//
+	AT91_REG	 PMC_SCER; 	// System Clock Enable Register
+	AT91_REG	 PMC_SCDR; 	// System Clock Disable Register
+	AT91_REG	 PMC_SCSR; 	// System Clock Status Register
+	AT91_REG	 Reserved20[1]; 	//
+	AT91_REG	 PMC_PCER; 	// Peripheral Clock Enable Register
+	AT91_REG	 PMC_PCDR; 	// Peripheral Clock Disable Register
+	AT91_REG	 PMC_PCSR; 	// Peripheral Clock Status Register
+	AT91_REG	 Reserved21[1]; 	//
+	AT91_REG	 PMC_MOR; 	// Main Oscillator Register
+	AT91_REG	 PMC_MCFR; 	// Main Clock  Frequency Register
+	AT91_REG	 Reserved22[1]; 	//
+	AT91_REG	 PMC_PLLR; 	// PLL Register
+	AT91_REG	 PMC_MCKR; 	// Master Clock Register
+	AT91_REG	 Reserved23[3]; 	//
+	AT91_REG	 PMC_PCKR[4]; 	// Programmable Clock Register
+	AT91_REG	 Reserved24[4]; 	//
+	AT91_REG	 PMC_IER; 	// Interrupt Enable Register
+	AT91_REG	 PMC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PMC_SR; 	// Status Register
+	AT91_REG	 PMC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved25[36]; 	//
+	AT91_REG	 RSTC_RCR; 	// Reset Control Register
+	AT91_REG	 RSTC_RSR; 	// Reset Status Register
+	AT91_REG	 RSTC_RMR; 	// Reset Mode Register
+	AT91_REG	 Reserved26[5]; 	//
+	AT91_REG	 RTTC_RTMR; 	// Real-time Mode Register
+	AT91_REG	 RTTC_RTAR; 	// Real-time Alarm Register
+	AT91_REG	 RTTC_RTVR; 	// Real-time Value Register
+	AT91_REG	 RTTC_RTSR; 	// Real-time Status Register
+	AT91_REG	 PITC_PIMR; 	// Period Interval Mode Register
+	AT91_REG	 PITC_PISR; 	// Period Interval Status Register
+	AT91_REG	 PITC_PIVR; 	// Period Interval Value Register
+	AT91_REG	 PITC_PIIR; 	// Period Interval Image Register
+	AT91_REG	 WDTC_WDCR; 	// Watchdog Control Register
+	AT91_REG	 WDTC_WDMR; 	// Watchdog Mode Register
+	AT91_REG	 WDTC_WDSR; 	// Watchdog Status Register
+	AT91_REG	 Reserved27[5]; 	//
+	AT91_REG	 VREG_MR; 	// Voltage Regulator Mode Register
+} AT91S_SYS, *AT91PS_SYS;
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+// *****************************************************************************
+typedef struct _AT91S_AIC {
+	AT91_REG	 AIC_SMR[32]; 	// Source Mode Register
+	AT91_REG	 AIC_SVR[32]; 	// Source Vector Register
+	AT91_REG	 AIC_IVR; 	// IRQ Vector Register
+	AT91_REG	 AIC_FVR; 	// FIQ Vector Register
+	AT91_REG	 AIC_ISR; 	// Interrupt Status Register
+	AT91_REG	 AIC_IPR; 	// Interrupt Pending Register
+	AT91_REG	 AIC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 AIC_CISR; 	// Core Interrupt Status Register
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 AIC_IECR; 	// Interrupt Enable Command Register
+	AT91_REG	 AIC_IDCR; 	// Interrupt Disable Command Register
+	AT91_REG	 AIC_ICCR; 	// Interrupt Clear Command Register
+	AT91_REG	 AIC_ISCR; 	// Interrupt Set Command Register
+	AT91_REG	 AIC_EOICR; 	// End of Interrupt Command Register
+	AT91_REG	 AIC_SPU; 	// Spurious Vector Register
+	AT91_REG	 AIC_DCR; 	// Debug Control Register (Protect)
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 AIC_FFER; 	// Fast Forcing Enable Register
+	AT91_REG	 AIC_FFDR; 	// Fast Forcing Disable Register
+	AT91_REG	 AIC_FFSR; 	// Fast Forcing Status Register
+} AT91S_AIC, *AT91PS_AIC;
+// -------- AIC_SMR : (AIC Offset: 0x0) Control Register --------
+#define AT91C_AIC_PRIOR       ((unsigned int) 0x7 <<  0) // (AIC) Priority Level
+#define 	AT91C_AIC_PRIOR_LOWEST               ((unsigned int) 0x0) // (AIC) Lowest priority level
+#define 	AT91C_AIC_PRIOR_HIGHEST              ((unsigned int) 0x7) // (AIC) Highest priority level
+#define AT91C_AIC_SRCTYPE     ((unsigned int) 0x3 <<  5) // (AIC) Interrupt Source Type
+#define 	AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL       ((unsigned int) 0x0 <<  5) // (AIC) Internal Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL        ((unsigned int) 0x0 <<  5) // (AIC) External Sources Code Label Low-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE    ((unsigned int) 0x1 <<  5) // (AIC) Internal Sources Code Label Positive Edge triggered
+#define 	AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE    ((unsigned int) 0x1 <<  5) // (AIC) External Sources Code Label Negative Edge triggered
+#define 	AT91C_AIC_SRCTYPE_HIGH_LEVEL           ((unsigned int) 0x2 <<  5) // (AIC) Internal Or External Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_POSITIVE_EDGE        ((unsigned int) 0x3 <<  5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered
+// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register --------
+#define AT91C_AIC_NFIQ        ((unsigned int) 0x1 <<  0) // (AIC) NFIQ Status
+#define AT91C_AIC_NIRQ        ((unsigned int) 0x1 <<  1) // (AIC) NIRQ Status
+// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) --------
+#define AT91C_AIC_DCR_PROT    ((unsigned int) 0x1 <<  0) // (AIC) Protection Mode
+#define AT91C_AIC_DCR_GMSK    ((unsigned int) 0x1 <<  1) // (AIC) General Mask
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
+// *****************************************************************************
+typedef struct _AT91S_PDC {
+	AT91_REG	 PDC_RPR; 	// Receive Pointer Register
+	AT91_REG	 PDC_RCR; 	// Receive Counter Register
+	AT91_REG	 PDC_TPR; 	// Transmit Pointer Register
+	AT91_REG	 PDC_TCR; 	// Transmit Counter Register
+	AT91_REG	 PDC_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 PDC_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 PDC_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 PDC_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 PDC_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 PDC_PTSR; 	// PDC Transfer Status Register
+} AT91S_PDC, *AT91PS_PDC;
+// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register --------
+#define AT91C_PDC_RXTEN       ((unsigned int) 0x1 <<  0) // (PDC) Receiver Transfer Enable
+#define AT91C_PDC_RXTDIS      ((unsigned int) 0x1 <<  1) // (PDC) Receiver Transfer Disable
+#define AT91C_PDC_TXTEN       ((unsigned int) 0x1 <<  8) // (PDC) Transmitter Transfer Enable
+#define AT91C_PDC_TXTDIS      ((unsigned int) 0x1 <<  9) // (PDC) Transmitter Transfer Disable
+// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Debug Unit
+// *****************************************************************************
+typedef struct _AT91S_DBGU {
+	AT91_REG	 DBGU_CR; 	// Control Register
+	AT91_REG	 DBGU_MR; 	// Mode Register
+	AT91_REG	 DBGU_IER; 	// Interrupt Enable Register
+	AT91_REG	 DBGU_IDR; 	// Interrupt Disable Register
+	AT91_REG	 DBGU_IMR; 	// Interrupt Mask Register
+	AT91_REG	 DBGU_CSR; 	// Channel Status Register
+	AT91_REG	 DBGU_RHR; 	// Receiver Holding Register
+	AT91_REG	 DBGU_THR; 	// Transmitter Holding Register
+	AT91_REG	 DBGU_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 Reserved0[7]; 	//
+	AT91_REG	 DBGU_CIDR; 	// Chip ID Register
+	AT91_REG	 DBGU_EXID; 	// Chip ID Extension Register
+	AT91_REG	 DBGU_FNTR; 	// Force NTRST Register
+	AT91_REG	 Reserved1[45]; 	//
+	AT91_REG	 DBGU_RPR; 	// Receive Pointer Register
+	AT91_REG	 DBGU_RCR; 	// Receive Counter Register
+	AT91_REG	 DBGU_TPR; 	// Transmit Pointer Register
+	AT91_REG	 DBGU_TCR; 	// Transmit Counter Register
+	AT91_REG	 DBGU_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 DBGU_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 DBGU_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 DBGU_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 DBGU_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 DBGU_PTSR; 	// PDC Transfer Status Register
+} AT91S_DBGU, *AT91PS_DBGU;
+// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register --------
+#define AT91C_US_RSTRX        ((unsigned int) 0x1 <<  2) // (DBGU) Reset Receiver
+#define AT91C_US_RSTTX        ((unsigned int) 0x1 <<  3) // (DBGU) Reset Transmitter
+#define AT91C_US_RXEN         ((unsigned int) 0x1 <<  4) // (DBGU) Receiver Enable
+#define AT91C_US_RXDIS        ((unsigned int) 0x1 <<  5) // (DBGU) Receiver Disable
+#define AT91C_US_TXEN         ((unsigned int) 0x1 <<  6) // (DBGU) Transmitter Enable
+#define AT91C_US_TXDIS        ((unsigned int) 0x1 <<  7) // (DBGU) Transmitter Disable
+#define AT91C_US_RSTSTA       ((unsigned int) 0x1 <<  8) // (DBGU) Reset Status Bits
+// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register --------
+#define AT91C_US_PAR          ((unsigned int) 0x7 <<  9) // (DBGU) Parity type
+#define 	AT91C_US_PAR_EVEN                 ((unsigned int) 0x0 <<  9) // (DBGU) Even Parity
+#define 	AT91C_US_PAR_ODD                  ((unsigned int) 0x1 <<  9) // (DBGU) Odd Parity
+#define 	AT91C_US_PAR_SPACE                ((unsigned int) 0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
+#define 	AT91C_US_PAR_MARK                 ((unsigned int) 0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
+#define 	AT91C_US_PAR_NONE                 ((unsigned int) 0x4 <<  9) // (DBGU) No Parity
+#define 	AT91C_US_PAR_MULTI_DROP           ((unsigned int) 0x6 <<  9) // (DBGU) Multi-drop mode
+#define AT91C_US_CHMODE       ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode
+#define 	AT91C_US_CHMODE_NORMAL               ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+#define 	AT91C_US_CHMODE_AUTO                 ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+#define 	AT91C_US_CHMODE_LOCAL                ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+#define 	AT91C_US_CHMODE_REMOTE               ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register --------
+#define AT91C_US_RXRDY        ((unsigned int) 0x1 <<  0) // (DBGU) RXRDY Interrupt
+#define AT91C_US_TXRDY        ((unsigned int) 0x1 <<  1) // (DBGU) TXRDY Interrupt
+#define AT91C_US_ENDRX        ((unsigned int) 0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
+#define AT91C_US_ENDTX        ((unsigned int) 0x1 <<  4) // (DBGU) End of Transmit Interrupt
+#define AT91C_US_OVRE         ((unsigned int) 0x1 <<  5) // (DBGU) Overrun Interrupt
+#define AT91C_US_FRAME        ((unsigned int) 0x1 <<  6) // (DBGU) Framing Error Interrupt
+#define AT91C_US_PARE         ((unsigned int) 0x1 <<  7) // (DBGU) Parity Error Interrupt
+#define AT91C_US_TXEMPTY      ((unsigned int) 0x1 <<  9) // (DBGU) TXEMPTY Interrupt
+#define AT91C_US_TXBUFE       ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt
+#define AT91C_US_RXBUFF       ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt
+#define AT91C_US_COMM_TX      ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt
+#define AT91C_US_COMM_RX      ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt
+// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register --------
+// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------
+// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register --------
+// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register --------
+#define AT91C_US_FORCE_NTRST  ((unsigned int) 0x1 <<  0) // (DBGU) Force NTRST in JTAG
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+// *****************************************************************************
+typedef struct _AT91S_PIO {
+	AT91_REG	 PIO_PER; 	// PIO Enable Register
+	AT91_REG	 PIO_PDR; 	// PIO Disable Register
+	AT91_REG	 PIO_PSR; 	// PIO Status Register
+	AT91_REG	 Reserved0[1]; 	//
+	AT91_REG	 PIO_OER; 	// Output Enable Register
+	AT91_REG	 PIO_ODR; 	// Output Disable Registerr
+	AT91_REG	 PIO_OSR; 	// Output Status Register
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 PIO_IFER; 	// Input Filter Enable Register
+	AT91_REG	 PIO_IFDR; 	// Input Filter Disable Register
+	AT91_REG	 PIO_IFSR; 	// Input Filter Status Register
+	AT91_REG	 Reserved2[1]; 	//
+	AT91_REG	 PIO_SODR; 	// Set Output Data Register
+	AT91_REG	 PIO_CODR; 	// Clear Output Data Register
+	AT91_REG	 PIO_ODSR; 	// Output Data Status Register
+	AT91_REG	 PIO_PDSR; 	// Pin Data Status Register
+	AT91_REG	 PIO_IER; 	// Interrupt Enable Register
+	AT91_REG	 PIO_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PIO_IMR; 	// Interrupt Mask Register
+	AT91_REG	 PIO_ISR; 	// Interrupt Status Register
+	AT91_REG	 PIO_MDER; 	// Multi-driver Enable Register
+	AT91_REG	 PIO_MDDR; 	// Multi-driver Disable Register
+	AT91_REG	 PIO_MDSR; 	// Multi-driver Status Register
+	AT91_REG	 Reserved3[1]; 	//
+	AT91_REG	 PIO_PPUDR; 	// Pull-up Disable Register
+	AT91_REG	 PIO_PPUER; 	// Pull-up Enable Register
+	AT91_REG	 PIO_PPUSR; 	// Pull-up Status Register
+	AT91_REG	 Reserved4[1]; 	//
+	AT91_REG	 PIO_ASR; 	// Select A Register
+	AT91_REG	 PIO_BSR; 	// Select B Register
+	AT91_REG	 PIO_ABSR; 	// AB Select Status Register
+	AT91_REG	 Reserved5[9]; 	//
+	AT91_REG	 PIO_OWER; 	// Output Write Enable Register
+	AT91_REG	 PIO_OWDR; 	// Output Write Disable Register
+	AT91_REG	 PIO_OWSR; 	// Output Write Status Register
+} AT91S_PIO, *AT91PS_PIO;
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+// *****************************************************************************
+typedef struct _AT91S_CKGR {
+	AT91_REG	 CKGR_MOR; 	// Main Oscillator Register
+	AT91_REG	 CKGR_MCFR; 	// Main Clock  Frequency Register
+	AT91_REG	 Reserved0[1]; 	//
+	AT91_REG	 CKGR_PLLR; 	// PLL Register
+} AT91S_CKGR, *AT91PS_CKGR;
+// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
+#define AT91C_CKGR_MOSCEN     ((unsigned int) 0x1 <<  0) // (CKGR) Main Oscillator Enable
+#define AT91C_CKGR_OSCBYPASS  ((unsigned int) 0x1 <<  1) // (CKGR) Main Oscillator Bypass
+#define AT91C_CKGR_OSCOUNT    ((unsigned int) 0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
+// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
+#define AT91C_CKGR_MAINF      ((unsigned int) 0xFFFF <<  0) // (CKGR) Main Clock Frequency
+#define AT91C_CKGR_MAINRDY    ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready
+// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register --------
+#define AT91C_CKGR_DIV        ((unsigned int) 0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIV_0                    ((unsigned int) 0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIV_BYPASS               ((unsigned int) 0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLCOUNT   ((unsigned int) 0x3F <<  8) // (CKGR) PLL Counter
+#define AT91C_CKGR_OUT        ((unsigned int) 0x3 << 14) // (CKGR) PLL Output Frequency Range
+#define 	AT91C_CKGR_OUT_0                    ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_1                    ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_2                    ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_3                    ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLL datasheet
+#define AT91C_CKGR_MUL        ((unsigned int) 0x7FF << 16) // (CKGR) PLL Multiplier
+#define AT91C_CKGR_USBDIV     ((unsigned int) 0x3 << 28) // (CKGR) Divider for USB Clocks
+#define 	AT91C_CKGR_USBDIV_0                    ((unsigned int) 0x0 << 28) // (CKGR) Divider output is PLL clock output
+#define 	AT91C_CKGR_USBDIV_1                    ((unsigned int) 0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
+#define 	AT91C_CKGR_USBDIV_2                    ((unsigned int) 0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Power Management Controler
+// *****************************************************************************
+typedef struct _AT91S_PMC {
+	AT91_REG	 PMC_SCER; 	// System Clock Enable Register
+	AT91_REG	 PMC_SCDR; 	// System Clock Disable Register
+	AT91_REG	 PMC_SCSR; 	// System Clock Status Register
+	AT91_REG	 Reserved0[1]; 	//
+	AT91_REG	 PMC_PCER; 	// Peripheral Clock Enable Register
+	AT91_REG	 PMC_PCDR; 	// Peripheral Clock Disable Register
+	AT91_REG	 PMC_PCSR; 	// Peripheral Clock Status Register
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 PMC_MOR; 	// Main Oscillator Register
+	AT91_REG	 PMC_MCFR; 	// Main Clock  Frequency Register
+	AT91_REG	 Reserved2[1]; 	//
+	AT91_REG	 PMC_PLLR; 	// PLL Register
+	AT91_REG	 PMC_MCKR; 	// Master Clock Register
+	AT91_REG	 Reserved3[3]; 	//
+	AT91_REG	 PMC_PCKR[4]; 	// Programmable Clock Register
+	AT91_REG	 Reserved4[4]; 	//
+	AT91_REG	 PMC_IER; 	// Interrupt Enable Register
+	AT91_REG	 PMC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 PMC_SR; 	// Status Register
+	AT91_REG	 PMC_IMR; 	// Interrupt Mask Register
+} AT91S_PMC, *AT91PS_PMC;
+// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
+#define AT91C_PMC_PCK         ((unsigned int) 0x1 <<  0) // (PMC) Processor Clock
+#define AT91C_PMC_UDP         ((unsigned int) 0x1 <<  7) // (PMC) USB Device Port Clock
+#define AT91C_PMC_PCK0        ((unsigned int) 0x1 <<  8) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK1        ((unsigned int) 0x1 <<  9) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK2        ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK3        ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output
+// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
+// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
+// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register --------
+// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register --------
+// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register --------
+// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
+#define AT91C_PMC_CSS         ((unsigned int) 0x3 <<  0) // (PMC) Programmable Clock Selection
+#define 	AT91C_PMC_CSS_SLOW_CLK             ((unsigned int) 0x0) // (PMC) Slow Clock is selected
+#define 	AT91C_PMC_CSS_MAIN_CLK             ((unsigned int) 0x1) // (PMC) Main Clock is selected
+#define 	AT91C_PMC_CSS_PLL_CLK              ((unsigned int) 0x3) // (PMC) Clock from PLL is selected
+#define AT91C_PMC_PRES        ((unsigned int) 0x7 <<  2) // (PMC) Programmable Clock Prescaler
+#define 	AT91C_PMC_PRES_CLK                  ((unsigned int) 0x0 <<  2) // (PMC) Selected clock
+#define 	AT91C_PMC_PRES_CLK_2                ((unsigned int) 0x1 <<  2) // (PMC) Selected clock divided by 2
+#define 	AT91C_PMC_PRES_CLK_4                ((unsigned int) 0x2 <<  2) // (PMC) Selected clock divided by 4
+#define 	AT91C_PMC_PRES_CLK_8                ((unsigned int) 0x3 <<  2) // (PMC) Selected clock divided by 8
+#define 	AT91C_PMC_PRES_CLK_16               ((unsigned int) 0x4 <<  2) // (PMC) Selected clock divided by 16
+#define 	AT91C_PMC_PRES_CLK_32               ((unsigned int) 0x5 <<  2) // (PMC) Selected clock divided by 32
+#define 	AT91C_PMC_PRES_CLK_64               ((unsigned int) 0x6 <<  2) // (PMC) Selected clock divided by 64
+// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
+// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
+#define AT91C_PMC_MOSCS       ((unsigned int) 0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCK        ((unsigned int) 0x1 <<  2) // (PMC) PLL Status/Enable/Disable/Mask
+#define AT91C_PMC_MCKRDY      ((unsigned int) 0x1 <<  3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK0RDY     ((unsigned int) 0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK1RDY     ((unsigned int) 0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK2RDY     ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK3RDY     ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
+// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
+// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
+// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Reset Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_RSTC {
+	AT91_REG	 RSTC_RCR; 	// Reset Control Register
+	AT91_REG	 RSTC_RSR; 	// Reset Status Register
+	AT91_REG	 RSTC_RMR; 	// Reset Mode Register
+} AT91S_RSTC, *AT91PS_RSTC;
+// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register --------
+#define AT91C_RSTC_PROCRST    ((unsigned int) 0x1 <<  0) // (RSTC) Processor Reset
+#define AT91C_RSTC_PERRST     ((unsigned int) 0x1 <<  2) // (RSTC) Peripheral Reset
+#define AT91C_RSTC_EXTRST     ((unsigned int) 0x1 <<  3) // (RSTC) External Reset
+#define AT91C_RSTC_KEY        ((unsigned int) 0xFF << 24) // (RSTC) Password
+// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register --------
+#define AT91C_RSTC_URSTS      ((unsigned int) 0x1 <<  0) // (RSTC) User Reset Status
+#define AT91C_RSTC_BODSTS     ((unsigned int) 0x1 <<  1) // (RSTC) Brownout Detection Status
+#define AT91C_RSTC_RSTTYP     ((unsigned int) 0x7 <<  8) // (RSTC) Reset Type
+#define 	AT91C_RSTC_RSTTYP_POWERUP              ((unsigned int) 0x0 <<  8) // (RSTC) Power-up Reset. VDDCORE rising.
+#define 	AT91C_RSTC_RSTTYP_WAKEUP               ((unsigned int) 0x1 <<  8) // (RSTC) WakeUp Reset. VDDCORE rising.
+#define 	AT91C_RSTC_RSTTYP_WATCHDOG             ((unsigned int) 0x2 <<  8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
+#define 	AT91C_RSTC_RSTTYP_SOFTWARE             ((unsigned int) 0x3 <<  8) // (RSTC) Software Reset. Processor reset required by the software.
+#define 	AT91C_RSTC_RSTTYP_USER                 ((unsigned int) 0x4 <<  8) // (RSTC) User Reset. NRST pin detected low.
+#define 	AT91C_RSTC_RSTTYP_BROWNOUT             ((unsigned int) 0x5 <<  8) // (RSTC) Brownout Reset occured.
+#define AT91C_RSTC_NRSTL      ((unsigned int) 0x1 << 16) // (RSTC) NRST pin level
+#define AT91C_RSTC_SRCMP      ((unsigned int) 0x1 << 17) // (RSTC) Software Reset Command in Progress.
+// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register --------
+#define AT91C_RSTC_URSTEN     ((unsigned int) 0x1 <<  0) // (RSTC) User Reset Enable
+#define AT91C_RSTC_URSTIEN    ((unsigned int) 0x1 <<  4) // (RSTC) User Reset Interrupt Enable
+#define AT91C_RSTC_ERSTL      ((unsigned int) 0xF <<  8) // (RSTC) User Reset Length
+#define AT91C_RSTC_BODIEN     ((unsigned int) 0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_RTTC {
+	AT91_REG	 RTTC_RTMR; 	// Real-time Mode Register
+	AT91_REG	 RTTC_RTAR; 	// Real-time Alarm Register
+	AT91_REG	 RTTC_RTVR; 	// Real-time Value Register
+	AT91_REG	 RTTC_RTSR; 	// Real-time Status Register
+} AT91S_RTTC, *AT91PS_RTTC;
+// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register --------
+#define AT91C_RTTC_RTPRES     ((unsigned int) 0xFFFF <<  0) // (RTTC) Real-time Timer Prescaler Value
+#define AT91C_RTTC_ALMIEN     ((unsigned int) 0x1 << 16) // (RTTC) Alarm Interrupt Enable
+#define AT91C_RTTC_RTTINCIEN  ((unsigned int) 0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
+#define AT91C_RTTC_RTTRST     ((unsigned int) 0x1 << 18) // (RTTC) Real Time Timer Restart
+// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register --------
+#define AT91C_RTTC_ALMV       ((unsigned int) 0x0 <<  0) // (RTTC) Alarm Value
+// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register --------
+#define AT91C_RTTC_CRTV       ((unsigned int) 0x0 <<  0) // (RTTC) Current Real-time Value
+// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register --------
+#define AT91C_RTTC_ALMS       ((unsigned int) 0x1 <<  0) // (RTTC) Real-time Alarm Status
+#define AT91C_RTTC_RTTINC     ((unsigned int) 0x1 <<  1) // (RTTC) Real-time Timer Increment
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_PITC {
+	AT91_REG	 PITC_PIMR; 	// Period Interval Mode Register
+	AT91_REG	 PITC_PISR; 	// Period Interval Status Register
+	AT91_REG	 PITC_PIVR; 	// Period Interval Value Register
+	AT91_REG	 PITC_PIIR; 	// Period Interval Image Register
+} AT91S_PITC, *AT91PS_PITC;
+// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register --------
+#define AT91C_PITC_PIV        ((unsigned int) 0xFFFFF <<  0) // (PITC) Periodic Interval Value
+#define AT91C_PITC_PITEN      ((unsigned int) 0x1 << 24) // (PITC) Periodic Interval Timer Enabled
+#define AT91C_PITC_PITIEN     ((unsigned int) 0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable
+// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register --------
+#define AT91C_PITC_PITS       ((unsigned int) 0x1 <<  0) // (PITC) Periodic Interval Timer Status
+// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register --------
+#define AT91C_PITC_CPIV       ((unsigned int) 0xFFFFF <<  0) // (PITC) Current Periodic Interval Value
+#define AT91C_PITC_PICNT      ((unsigned int) 0xFFF << 20) // (PITC) Periodic Interval Counter
+// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_WDTC {
+	AT91_REG	 WDTC_WDCR; 	// Watchdog Control Register
+	AT91_REG	 WDTC_WDMR; 	// Watchdog Mode Register
+	AT91_REG	 WDTC_WDSR; 	// Watchdog Status Register
+} AT91S_WDTC, *AT91PS_WDTC;
+// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register --------
+#define AT91C_WDTC_WDRSTT     ((unsigned int) 0x1 <<  0) // (WDTC) Watchdog Restart
+#define AT91C_WDTC_KEY        ((unsigned int) 0xFF << 24) // (WDTC) Watchdog KEY Password
+// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register --------
+#define AT91C_WDTC_WDV        ((unsigned int) 0xFFF <<  0) // (WDTC) Watchdog Timer Restart
+#define AT91C_WDTC_WDFIEN     ((unsigned int) 0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable
+#define AT91C_WDTC_WDRSTEN    ((unsigned int) 0x1 << 13) // (WDTC) Watchdog Reset Enable
+#define AT91C_WDTC_WDRPROC    ((unsigned int) 0x1 << 14) // (WDTC) Watchdog Timer Restart
+#define AT91C_WDTC_WDDIS      ((unsigned int) 0x1 << 15) // (WDTC) Watchdog Disable
+#define AT91C_WDTC_WDD        ((unsigned int) 0xFFF << 16) // (WDTC) Watchdog Delta Value
+#define AT91C_WDTC_WDDBGHLT   ((unsigned int) 0x1 << 28) // (WDTC) Watchdog Debug Halt
+#define AT91C_WDTC_WDIDLEHLT  ((unsigned int) 0x1 << 29) // (WDTC) Watchdog Idle Halt
+// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register --------
+#define AT91C_WDTC_WDUNF      ((unsigned int) 0x1 <<  0) // (WDTC) Watchdog Underflow
+#define AT91C_WDTC_WDERR      ((unsigned int) 0x1 <<  1) // (WDTC) Watchdog Error
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_VREG {
+	AT91_REG	 VREG_MR; 	// Voltage Regulator Mode Register
+} AT91S_VREG, *AT91PS_VREG;
+// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register --------
+#define AT91C_VREG_PSTDBY     ((unsigned int) 0x1 <<  0) // (VREG) Voltage Regulator Power Standby Mode
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_MC {
+	AT91_REG	 MC_RCR; 	// MC Remap Control Register
+	AT91_REG	 MC_ASR; 	// MC Abort Status Register
+	AT91_REG	 MC_AASR; 	// MC Abort Address Status Register
+	AT91_REG	 Reserved0[21]; 	//
+	AT91_REG	 MC_FMR; 	// MC Flash Mode Register
+	AT91_REG	 MC_FCR; 	// MC Flash Command Register
+	AT91_REG	 MC_FSR; 	// MC Flash Status Register
+} AT91S_MC, *AT91PS_MC;
+// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
+#define AT91C_MC_RCB          ((unsigned int) 0x1 <<  0) // (MC) Remap Command Bit
+// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
+#define AT91C_MC_UNDADD       ((unsigned int) 0x1 <<  0) // (MC) Undefined Addess Abort Status
+#define AT91C_MC_MISADD       ((unsigned int) 0x1 <<  1) // (MC) Misaligned Addess Abort Status
+#define AT91C_MC_ABTSZ        ((unsigned int) 0x3 <<  8) // (MC) Abort Size Status
+#define 	AT91C_MC_ABTSZ_BYTE                 ((unsigned int) 0x0 <<  8) // (MC) Byte
+#define 	AT91C_MC_ABTSZ_HWORD                ((unsigned int) 0x1 <<  8) // (MC) Half-word
+#define 	AT91C_MC_ABTSZ_WORD                 ((unsigned int) 0x2 <<  8) // (MC) Word
+#define AT91C_MC_ABTTYP       ((unsigned int) 0x3 << 10) // (MC) Abort Type Status
+#define 	AT91C_MC_ABTTYP_DATAR                ((unsigned int) 0x0 << 10) // (MC) Data Read
+#define 	AT91C_MC_ABTTYP_DATAW                ((unsigned int) 0x1 << 10) // (MC) Data Write
+#define 	AT91C_MC_ABTTYP_FETCH                ((unsigned int) 0x2 << 10) // (MC) Code Fetch
+#define AT91C_MC_MST0         ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source
+#define AT91C_MC_MST1         ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source
+#define AT91C_MC_SVMST0       ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source
+#define AT91C_MC_SVMST1       ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source
+// -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register --------
+#define AT91C_MC_FRDY         ((unsigned int) 0x1 <<  0) // (MC) Flash Ready
+#define AT91C_MC_LOCKE        ((unsigned int) 0x1 <<  2) // (MC) Lock Error
+#define AT91C_MC_PROGE        ((unsigned int) 0x1 <<  3) // (MC) Programming Error
+#define AT91C_MC_NEBP         ((unsigned int) 0x1 <<  7) // (MC) No Erase Before Programming
+#define AT91C_MC_FWS          ((unsigned int) 0x3 <<  8) // (MC) Flash Wait State
+#define 	AT91C_MC_FWS_0FWS                 ((unsigned int) 0x0 <<  8) // (MC) 1 cycle for Read, 2 for Write operations
+#define 	AT91C_MC_FWS_1FWS                 ((unsigned int) 0x1 <<  8) // (MC) 2 cycles for Read, 3 for Write operations
+#define 	AT91C_MC_FWS_2FWS                 ((unsigned int) 0x2 <<  8) // (MC) 3 cycles for Read, 4 for Write operations
+#define 	AT91C_MC_FWS_3FWS                 ((unsigned int) 0x3 <<  8) // (MC) 4 cycles for Read, 4 for Write operations
+#define AT91C_MC_FMCN         ((unsigned int) 0xFF << 16) // (MC) Flash Microsecond Cycle Number
+// -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register --------
+#define AT91C_MC_FCMD         ((unsigned int) 0xF <<  0) // (MC) Flash Command
+#define 	AT91C_MC_FCMD_START_PROG           ((unsigned int) 0x1) // (MC) Starts the programming of th epage specified by PAGEN.
+#define 	AT91C_MC_FCMD_LOCK                 ((unsigned int) 0x2) // (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+#define 	AT91C_MC_FCMD_PROG_AND_LOCK        ((unsigned int) 0x3) // (MC) The lock sequence automatically happens after the programming sequence is completed.
+#define 	AT91C_MC_FCMD_UNLOCK               ((unsigned int) 0x4) // (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+#define 	AT91C_MC_FCMD_ERASE_ALL            ((unsigned int) 0x8) // (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
+#define 	AT91C_MC_FCMD_SET_GP_NVM           ((unsigned int) 0xB) // (MC) Set General Purpose NVM bits.
+#define 	AT91C_MC_FCMD_CLR_GP_NVM           ((unsigned int) 0xD) // (MC) Clear General Purpose NVM bits.
+#define 	AT91C_MC_FCMD_SET_SECURITY         ((unsigned int) 0xF) // (MC) Set Security Bit.
+#define AT91C_MC_PAGEN        ((unsigned int) 0x3FF <<  8) // (MC) Page Number
+#define AT91C_MC_KEY          ((unsigned int) 0xFF << 24) // (MC) Writing Protect Key
+// -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register --------
+#define AT91C_MC_SECURITY     ((unsigned int) 0x1 <<  4) // (MC) Security Bit Status
+#define AT91C_MC_GPNVM0       ((unsigned int) 0x1 <<  8) // (MC) Sector 0 Lock Status
+#define AT91C_MC_GPNVM1       ((unsigned int) 0x1 <<  9) // (MC) Sector 1 Lock Status
+#define AT91C_MC_GPNVM2       ((unsigned int) 0x1 << 10) // (MC) Sector 2 Lock Status
+#define AT91C_MC_GPNVM3       ((unsigned int) 0x1 << 11) // (MC) Sector 3 Lock Status
+#define AT91C_MC_GPNVM4       ((unsigned int) 0x1 << 12) // (MC) Sector 4 Lock Status
+#define AT91C_MC_GPNVM5       ((unsigned int) 0x1 << 13) // (MC) Sector 5 Lock Status
+#define AT91C_MC_GPNVM6       ((unsigned int) 0x1 << 14) // (MC) Sector 6 Lock Status
+#define AT91C_MC_GPNVM7       ((unsigned int) 0x1 << 15) // (MC) Sector 7 Lock Status
+#define AT91C_MC_LOCKS0       ((unsigned int) 0x1 << 16) // (MC) Sector 0 Lock Status
+#define AT91C_MC_LOCKS1       ((unsigned int) 0x1 << 17) // (MC) Sector 1 Lock Status
+#define AT91C_MC_LOCKS2       ((unsigned int) 0x1 << 18) // (MC) Sector 2 Lock Status
+#define AT91C_MC_LOCKS3       ((unsigned int) 0x1 << 19) // (MC) Sector 3 Lock Status
+#define AT91C_MC_LOCKS4       ((unsigned int) 0x1 << 20) // (MC) Sector 4 Lock Status
+#define AT91C_MC_LOCKS5       ((unsigned int) 0x1 << 21) // (MC) Sector 5 Lock Status
+#define AT91C_MC_LOCKS6       ((unsigned int) 0x1 << 22) // (MC) Sector 6 Lock Status
+#define AT91C_MC_LOCKS7       ((unsigned int) 0x1 << 23) // (MC) Sector 7 Lock Status
+#define AT91C_MC_LOCKS8       ((unsigned int) 0x1 << 24) // (MC) Sector 8 Lock Status
+#define AT91C_MC_LOCKS9       ((unsigned int) 0x1 << 25) // (MC) Sector 9 Lock Status
+#define AT91C_MC_LOCKS10      ((unsigned int) 0x1 << 26) // (MC) Sector 10 Lock Status
+#define AT91C_MC_LOCKS11      ((unsigned int) 0x1 << 27) // (MC) Sector 11 Lock Status
+#define AT91C_MC_LOCKS12      ((unsigned int) 0x1 << 28) // (MC) Sector 12 Lock Status
+#define AT91C_MC_LOCKS13      ((unsigned int) 0x1 << 29) // (MC) Sector 13 Lock Status
+#define AT91C_MC_LOCKS14      ((unsigned int) 0x1 << 30) // (MC) Sector 14 Lock Status
+#define AT91C_MC_LOCKS15      ((unsigned int) 0x1 << 31) // (MC) Sector 15 Lock Status
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+// *****************************************************************************
+typedef struct _AT91S_SPI {
+	AT91_REG	 SPI_CR; 	// Control Register
+	AT91_REG	 SPI_MR; 	// Mode Register
+	AT91_REG	 SPI_RDR; 	// Receive Data Register
+	AT91_REG	 SPI_TDR; 	// Transmit Data Register
+	AT91_REG	 SPI_SR; 	// Status Register
+	AT91_REG	 SPI_IER; 	// Interrupt Enable Register
+	AT91_REG	 SPI_IDR; 	// Interrupt Disable Register
+	AT91_REG	 SPI_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved0[4]; 	//
+	AT91_REG	 SPI_CSR[4]; 	// Chip Select Register
+	AT91_REG	 Reserved1[48]; 	//
+	AT91_REG	 SPI_RPR; 	// Receive Pointer Register
+	AT91_REG	 SPI_RCR; 	// Receive Counter Register
+	AT91_REG	 SPI_TPR; 	// Transmit Pointer Register
+	AT91_REG	 SPI_TCR; 	// Transmit Counter Register
+	AT91_REG	 SPI_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 SPI_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 SPI_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 SPI_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 SPI_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 SPI_PTSR; 	// PDC Transfer Status Register
+} AT91S_SPI, *AT91PS_SPI;
+// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
+#define AT91C_SPI_SPIEN       ((unsigned int) 0x1 <<  0) // (SPI) SPI Enable
+#define AT91C_SPI_SPIDIS      ((unsigned int) 0x1 <<  1) // (SPI) SPI Disable
+#define AT91C_SPI_SWRST       ((unsigned int) 0x1 <<  7) // (SPI) SPI Software reset
+#define AT91C_SPI_LASTXFER    ((unsigned int) 0x1 << 24) // (SPI) SPI Last Transfer
+// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
+#define AT91C_SPI_MSTR        ((unsigned int) 0x1 <<  0) // (SPI) Master/Slave Mode
+#define AT91C_SPI_PS          ((unsigned int) 0x1 <<  1) // (SPI) Peripheral Select
+#define 	AT91C_SPI_PS_FIXED                ((unsigned int) 0x0 <<  1) // (SPI) Fixed Peripheral Select
+#define 	AT91C_SPI_PS_VARIABLE             ((unsigned int) 0x1 <<  1) // (SPI) Variable Peripheral Select
+#define AT91C_SPI_PCSDEC      ((unsigned int) 0x1 <<  2) // (SPI) Chip Select Decode
+#define AT91C_SPI_FDIV        ((unsigned int) 0x1 <<  3) // (SPI) Clock Selection
+#define AT91C_SPI_MODFDIS     ((unsigned int) 0x1 <<  4) // (SPI) Mode Fault Detection
+#define AT91C_SPI_LLB         ((unsigned int) 0x1 <<  7) // (SPI) Clock Selection
+#define AT91C_SPI_PCS         ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select
+#define AT91C_SPI_DLYBCS      ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects
+// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
+#define AT91C_SPI_RD          ((unsigned int) 0xFFFF <<  0) // (SPI) Receive Data
+#define AT91C_SPI_RPCS        ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
+#define AT91C_SPI_TD          ((unsigned int) 0xFFFF <<  0) // (SPI) Transmit Data
+#define AT91C_SPI_TPCS        ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
+#define AT91C_SPI_RDRF        ((unsigned int) 0x1 <<  0) // (SPI) Receive Data Register Full
+#define AT91C_SPI_TDRE        ((unsigned int) 0x1 <<  1) // (SPI) Transmit Data Register Empty
+#define AT91C_SPI_MODF        ((unsigned int) 0x1 <<  2) // (SPI) Mode Fault Error
+#define AT91C_SPI_OVRES       ((unsigned int) 0x1 <<  3) // (SPI) Overrun Error Status
+#define AT91C_SPI_ENDRX       ((unsigned int) 0x1 <<  4) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_ENDTX       ((unsigned int) 0x1 <<  5) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_RXBUFF      ((unsigned int) 0x1 <<  6) // (SPI) RXBUFF Interrupt
+#define AT91C_SPI_TXBUFE      ((unsigned int) 0x1 <<  7) // (SPI) TXBUFE Interrupt
+#define AT91C_SPI_NSSR        ((unsigned int) 0x1 <<  8) // (SPI) NSSR Interrupt
+#define AT91C_SPI_TXEMPTY     ((unsigned int) 0x1 <<  9) // (SPI) TXEMPTY Interrupt
+#define AT91C_SPI_SPIENS      ((unsigned int) 0x1 << 16) // (SPI) Enable Status
+// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
+// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
+// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
+// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
+#define AT91C_SPI_CPOL        ((unsigned int) 0x1 <<  0) // (SPI) Clock Polarity
+#define AT91C_SPI_NCPHA       ((unsigned int) 0x1 <<  1) // (SPI) Clock Phase
+#define AT91C_SPI_CSAAT       ((unsigned int) 0x1 <<  3) // (SPI) Chip Select Active After Transfer
+#define AT91C_SPI_BITS        ((unsigned int) 0xF <<  4) // (SPI) Bits Per Transfer
+#define 	AT91C_SPI_BITS_8                    ((unsigned int) 0x0 <<  4) // (SPI) 8 Bits Per transfer
+#define 	AT91C_SPI_BITS_9                    ((unsigned int) 0x1 <<  4) // (SPI) 9 Bits Per transfer
+#define 	AT91C_SPI_BITS_10                   ((unsigned int) 0x2 <<  4) // (SPI) 10 Bits Per transfer
+#define 	AT91C_SPI_BITS_11                   ((unsigned int) 0x3 <<  4) // (SPI) 11 Bits Per transfer
+#define 	AT91C_SPI_BITS_12                   ((unsigned int) 0x4 <<  4) // (SPI) 12 Bits Per transfer
+#define 	AT91C_SPI_BITS_13                   ((unsigned int) 0x5 <<  4) // (SPI) 13 Bits Per transfer
+#define 	AT91C_SPI_BITS_14                   ((unsigned int) 0x6 <<  4) // (SPI) 14 Bits Per transfer
+#define 	AT91C_SPI_BITS_15                   ((unsigned int) 0x7 <<  4) // (SPI) 15 Bits Per transfer
+#define 	AT91C_SPI_BITS_16                   ((unsigned int) 0x8 <<  4) // (SPI) 16 Bits Per transfer
+#define AT91C_SPI_SCBR        ((unsigned int) 0xFF <<  8) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBS       ((unsigned int) 0xFF << 16) // (SPI) Delay Before SPCK
+#define AT91C_SPI_DLYBCT      ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Usart
+// *****************************************************************************
+typedef struct _AT91S_USART {
+	AT91_REG	 US_CR; 	// Control Register
+	AT91_REG	 US_MR; 	// Mode Register
+	AT91_REG	 US_IER; 	// Interrupt Enable Register
+	AT91_REG	 US_IDR; 	// Interrupt Disable Register
+	AT91_REG	 US_IMR; 	// Interrupt Mask Register
+	AT91_REG	 US_CSR; 	// Channel Status Register
+	AT91_REG	 US_RHR; 	// Receiver Holding Register
+	AT91_REG	 US_THR; 	// Transmitter Holding Register
+	AT91_REG	 US_BRGR; 	// Baud Rate Generator Register
+	AT91_REG	 US_RTOR; 	// Receiver Time-out Register
+	AT91_REG	 US_TTGR; 	// Transmitter Time-guard Register
+	AT91_REG	 Reserved0[5]; 	//
+	AT91_REG	 US_FIDI; 	// FI_DI_Ratio Register
+	AT91_REG	 US_NER; 	// Nb Errors Register
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 US_IF; 	// IRDA_FILTER Register
+	AT91_REG	 Reserved2[44]; 	//
+	AT91_REG	 US_RPR; 	// Receive Pointer Register
+	AT91_REG	 US_RCR; 	// Receive Counter Register
+	AT91_REG	 US_TPR; 	// Transmit Pointer Register
+	AT91_REG	 US_TCR; 	// Transmit Counter Register
+	AT91_REG	 US_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 US_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 US_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 US_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 US_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 US_PTSR; 	// PDC Transfer Status Register
+} AT91S_USART, *AT91PS_USART;
+// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register --------
+#define AT91C_US_STTBRK       ((unsigned int) 0x1 <<  9) // (USART) Start Break
+#define AT91C_US_STPBRK       ((unsigned int) 0x1 << 10) // (USART) Stop Break
+#define AT91C_US_STTTO        ((unsigned int) 0x1 << 11) // (USART) Start Time-out
+#define AT91C_US_SENDA        ((unsigned int) 0x1 << 12) // (USART) Send Address
+#define AT91C_US_RSTIT        ((unsigned int) 0x1 << 13) // (USART) Reset Iterations
+#define AT91C_US_RSTNACK      ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge
+#define AT91C_US_RETTO        ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out
+#define AT91C_US_DTREN        ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable
+#define AT91C_US_DTRDIS       ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable
+#define AT91C_US_RTSEN        ((unsigned int) 0x1 << 18) // (USART) Request to Send enable
+#define AT91C_US_RTSDIS       ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable
+// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register --------
+#define AT91C_US_USMODE       ((unsigned int) 0xF <<  0) // (USART) Usart mode
+#define 	AT91C_US_USMODE_NORMAL               ((unsigned int) 0x0) // (USART) Normal
+#define 	AT91C_US_USMODE_RS485                ((unsigned int) 0x1) // (USART) RS485
+#define 	AT91C_US_USMODE_HWHSH                ((unsigned int) 0x2) // (USART) Hardware Handshaking
+#define 	AT91C_US_USMODE_MODEM                ((unsigned int) 0x3) // (USART) Modem
+#define 	AT91C_US_USMODE_ISO7816_0            ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0
+#define 	AT91C_US_USMODE_ISO7816_1            ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1
+#define 	AT91C_US_USMODE_IRDA                 ((unsigned int) 0x8) // (USART) IrDA
+#define 	AT91C_US_USMODE_SWHSH                ((unsigned int) 0xC) // (USART) Software Handshaking
+#define AT91C_US_CLKS         ((unsigned int) 0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CLKS_CLOCK                ((unsigned int) 0x0 <<  4) // (USART) Clock
+#define 	AT91C_US_CLKS_FDIV1                ((unsigned int) 0x1 <<  4) // (USART) fdiv1
+#define 	AT91C_US_CLKS_SLOW                 ((unsigned int) 0x2 <<  4) // (USART) slow_clock (ARM)
+#define 	AT91C_US_CLKS_EXT                  ((unsigned int) 0x3 <<  4) // (USART) External (SCK)
+#define AT91C_US_CHRL         ((unsigned int) 0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CHRL_5_BITS               ((unsigned int) 0x0 <<  6) // (USART) Character Length: 5 bits
+#define 	AT91C_US_CHRL_6_BITS               ((unsigned int) 0x1 <<  6) // (USART) Character Length: 6 bits
+#define 	AT91C_US_CHRL_7_BITS               ((unsigned int) 0x2 <<  6) // (USART) Character Length: 7 bits
+#define 	AT91C_US_CHRL_8_BITS               ((unsigned int) 0x3 <<  6) // (USART) Character Length: 8 bits
+#define AT91C_US_SYNC         ((unsigned int) 0x1 <<  8) // (USART) Synchronous Mode Select
+#define AT91C_US_NBSTOP       ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits
+#define 	AT91C_US_NBSTOP_1_BIT                ((unsigned int) 0x0 << 12) // (USART) 1 stop bit
+#define 	AT91C_US_NBSTOP_15_BIT               ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+#define 	AT91C_US_NBSTOP_2_BIT                ((unsigned int) 0x2 << 12) // (USART) 2 stop bits
+#define AT91C_US_MSBF         ((unsigned int) 0x1 << 16) // (USART) Bit Order
+#define AT91C_US_MODE9        ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length
+#define AT91C_US_CKLO         ((unsigned int) 0x1 << 18) // (USART) Clock Output Select
+#define AT91C_US_OVER         ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode
+#define AT91C_US_INACK        ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge
+#define AT91C_US_DSNACK       ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK
+#define AT91C_US_MAX_ITER     ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions
+#define AT91C_US_FILTER       ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter
+// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register --------
+#define AT91C_US_RXBRK        ((unsigned int) 0x1 <<  2) // (USART) Break Received/End of Break
+#define AT91C_US_TIMEOUT      ((unsigned int) 0x1 <<  8) // (USART) Receiver Time-out
+#define AT91C_US_ITERATION    ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached
+#define AT91C_US_NACK         ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge
+#define AT91C_US_RIIC         ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag
+#define AT91C_US_DSRIC        ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag
+#define AT91C_US_DCDIC        ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag
+#define AT91C_US_CTSIC        ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag
+// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register --------
+// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register --------
+// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register --------
+#define AT91C_US_RI           ((unsigned int) 0x1 << 20) // (USART) Image of RI Input
+#define AT91C_US_DSR          ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input
+#define AT91C_US_DCD          ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input
+#define AT91C_US_CTS          ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_SSC {
+	AT91_REG	 SSC_CR; 	// Control Register
+	AT91_REG	 SSC_CMR; 	// Clock Mode Register
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 SSC_RCMR; 	// Receive Clock ModeRegister
+	AT91_REG	 SSC_RFMR; 	// Receive Frame Mode Register
+	AT91_REG	 SSC_TCMR; 	// Transmit Clock Mode Register
+	AT91_REG	 SSC_TFMR; 	// Transmit Frame Mode Register
+	AT91_REG	 SSC_RHR; 	// Receive Holding Register
+	AT91_REG	 SSC_THR; 	// Transmit Holding Register
+	AT91_REG	 Reserved1[2]; 	//
+	AT91_REG	 SSC_RSHR; 	// Receive Sync Holding Register
+	AT91_REG	 SSC_TSHR; 	// Transmit Sync Holding Register
+	AT91_REG	 Reserved2[2]; 	//
+	AT91_REG	 SSC_SR; 	// Status Register
+	AT91_REG	 SSC_IER; 	// Interrupt Enable Register
+	AT91_REG	 SSC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 SSC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 Reserved3[44]; 	//
+	AT91_REG	 SSC_RPR; 	// Receive Pointer Register
+	AT91_REG	 SSC_RCR; 	// Receive Counter Register
+	AT91_REG	 SSC_TPR; 	// Transmit Pointer Register
+	AT91_REG	 SSC_TCR; 	// Transmit Counter Register
+	AT91_REG	 SSC_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 SSC_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 SSC_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 SSC_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 SSC_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 SSC_PTSR; 	// PDC Transfer Status Register
+} AT91S_SSC, *AT91PS_SSC;
+// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register --------
+#define AT91C_SSC_RXEN        ((unsigned int) 0x1 <<  0) // (SSC) Receive Enable
+#define AT91C_SSC_RXDIS       ((unsigned int) 0x1 <<  1) // (SSC) Receive Disable
+#define AT91C_SSC_TXEN        ((unsigned int) 0x1 <<  8) // (SSC) Transmit Enable
+#define AT91C_SSC_TXDIS       ((unsigned int) 0x1 <<  9) // (SSC) Transmit Disable
+#define AT91C_SSC_SWRST       ((unsigned int) 0x1 << 15) // (SSC) Software Reset
+// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register --------
+#define AT91C_SSC_CKS         ((unsigned int) 0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
+#define 	AT91C_SSC_CKS_DIV                  ((unsigned int) 0x0) // (SSC) Divided Clock
+#define 	AT91C_SSC_CKS_TK                   ((unsigned int) 0x1) // (SSC) TK Clock signal
+#define 	AT91C_SSC_CKS_RK                   ((unsigned int) 0x2) // (SSC) RK pin
+#define AT91C_SSC_CKO         ((unsigned int) 0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
+#define 	AT91C_SSC_CKO_NONE                 ((unsigned int) 0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+#define 	AT91C_SSC_CKO_CONTINOUS            ((unsigned int) 0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
+#define 	AT91C_SSC_CKO_DATA_TX              ((unsigned int) 0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+#define AT91C_SSC_CKI         ((unsigned int) 0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
+#define AT91C_SSC_CKG         ((unsigned int) 0x3 <<  6) // (SSC) Receive/Transmit Clock Gating Selection
+#define 	AT91C_SSC_CKG_NONE                 ((unsigned int) 0x0 <<  6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock
+#define 	AT91C_SSC_CKG_LOW                  ((unsigned int) 0x1 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF Low
+#define 	AT91C_SSC_CKG_HIGH                 ((unsigned int) 0x2 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF High
+#define AT91C_SSC_START       ((unsigned int) 0xF <<  8) // (SSC) Receive/Transmit Start Selection
+#define 	AT91C_SSC_START_CONTINOUS            ((unsigned int) 0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+#define 	AT91C_SSC_START_TX                   ((unsigned int) 0x1 <<  8) // (SSC) Transmit/Receive start
+#define 	AT91C_SSC_START_LOW_RF               ((unsigned int) 0x2 <<  8) // (SSC) Detection of a low level on RF input
+#define 	AT91C_SSC_START_HIGH_RF              ((unsigned int) 0x3 <<  8) // (SSC) Detection of a high level on RF input
+#define 	AT91C_SSC_START_FALL_RF              ((unsigned int) 0x4 <<  8) // (SSC) Detection of a falling edge on RF input
+#define 	AT91C_SSC_START_RISE_RF              ((unsigned int) 0x5 <<  8) // (SSC) Detection of a rising edge on RF input
+#define 	AT91C_SSC_START_LEVEL_RF             ((unsigned int) 0x6 <<  8) // (SSC) Detection of any level change on RF input
+#define 	AT91C_SSC_START_EDGE_RF              ((unsigned int) 0x7 <<  8) // (SSC) Detection of any edge on RF input
+#define 	AT91C_SSC_START_0                    ((unsigned int) 0x8 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_STOP        ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection
+#define AT91C_SSC_STTDLY      ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay
+#define AT91C_SSC_PERIOD      ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
+// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register --------
+#define AT91C_SSC_DATLEN      ((unsigned int) 0x1F <<  0) // (SSC) Data Length
+#define AT91C_SSC_LOOP        ((unsigned int) 0x1 <<  5) // (SSC) Loop Mode
+#define AT91C_SSC_MSBF        ((unsigned int) 0x1 <<  7) // (SSC) Most Significant Bit First
+#define AT91C_SSC_DATNB       ((unsigned int) 0xF <<  8) // (SSC) Data Number per Frame
+#define AT91C_SSC_FSLEN       ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length
+#define AT91C_SSC_FSOS        ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
+#define 	AT91C_SSC_FSOS_NONE                 ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+#define 	AT91C_SSC_FSOS_NEGATIVE             ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+#define 	AT91C_SSC_FSOS_POSITIVE             ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+#define 	AT91C_SSC_FSOS_LOW                  ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+#define 	AT91C_SSC_FSOS_HIGH                 ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+#define 	AT91C_SSC_FSOS_TOGGLE               ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+#define AT91C_SSC_FSEDGE      ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection
+// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register --------
+// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register --------
+#define AT91C_SSC_DATDEF      ((unsigned int) 0x1 <<  5) // (SSC) Data Default Value
+#define AT91C_SSC_FSDEN       ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable
+// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register --------
+#define AT91C_SSC_TXRDY       ((unsigned int) 0x1 <<  0) // (SSC) Transmit Ready
+#define AT91C_SSC_TXEMPTY     ((unsigned int) 0x1 <<  1) // (SSC) Transmit Empty
+#define AT91C_SSC_ENDTX       ((unsigned int) 0x1 <<  2) // (SSC) End Of Transmission
+#define AT91C_SSC_TXBUFE      ((unsigned int) 0x1 <<  3) // (SSC) Transmit Buffer Empty
+#define AT91C_SSC_RXRDY       ((unsigned int) 0x1 <<  4) // (SSC) Receive Ready
+#define AT91C_SSC_OVRUN       ((unsigned int) 0x1 <<  5) // (SSC) Receive Overrun
+#define AT91C_SSC_ENDRX       ((unsigned int) 0x1 <<  6) // (SSC) End of Reception
+#define AT91C_SSC_RXBUFF      ((unsigned int) 0x1 <<  7) // (SSC) Receive Buffer Full
+#define AT91C_SSC_CP0         ((unsigned int) 0x1 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_CP1         ((unsigned int) 0x1 <<  9) // (SSC) Compare 1
+#define AT91C_SSC_TXSYN       ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync
+#define AT91C_SSC_RXSYN       ((unsigned int) 0x1 << 11) // (SSC) Receive Sync
+#define AT91C_SSC_TXENA       ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable
+#define AT91C_SSC_RXENA       ((unsigned int) 0x1 << 17) // (SSC) Receive Enable
+// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register --------
+// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register --------
+// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Two-wire Interface
+// *****************************************************************************
+typedef struct _AT91S_TWI {
+	AT91_REG	 TWI_CR; 	// Control Register
+	AT91_REG	 TWI_MMR; 	// Master Mode Register
+	AT91_REG	 Reserved0[1]; 	//
+	AT91_REG	 TWI_IADR; 	// Internal Address Register
+	AT91_REG	 TWI_CWGR; 	// Clock Waveform Generator Register
+	AT91_REG	 Reserved1[3]; 	//
+	AT91_REG	 TWI_SR; 	// Status Register
+	AT91_REG	 TWI_IER; 	// Interrupt Enable Register
+	AT91_REG	 TWI_IDR; 	// Interrupt Disable Register
+	AT91_REG	 TWI_IMR; 	// Interrupt Mask Register
+	AT91_REG	 TWI_RHR; 	// Receive Holding Register
+	AT91_REG	 TWI_THR; 	// Transmit Holding Register
+} AT91S_TWI, *AT91PS_TWI;
+// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register --------
+#define AT91C_TWI_START       ((unsigned int) 0x1 <<  0) // (TWI) Send a START Condition
+#define AT91C_TWI_STOP        ((unsigned int) 0x1 <<  1) // (TWI) Send a STOP Condition
+#define AT91C_TWI_MSEN        ((unsigned int) 0x1 <<  2) // (TWI) TWI Master Transfer Enabled
+#define AT91C_TWI_MSDIS       ((unsigned int) 0x1 <<  3) // (TWI) TWI Master Transfer Disabled
+#define AT91C_TWI_SWRST       ((unsigned int) 0x1 <<  7) // (TWI) Software Reset
+// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register --------
+#define AT91C_TWI_IADRSZ      ((unsigned int) 0x3 <<  8) // (TWI) Internal Device Address Size
+#define 	AT91C_TWI_IADRSZ_NO                   ((unsigned int) 0x0 <<  8) // (TWI) No internal device address
+#define 	AT91C_TWI_IADRSZ_1_BYTE               ((unsigned int) 0x1 <<  8) // (TWI) One-byte internal device address
+#define 	AT91C_TWI_IADRSZ_2_BYTE               ((unsigned int) 0x2 <<  8) // (TWI) Two-byte internal device address
+#define 	AT91C_TWI_IADRSZ_3_BYTE               ((unsigned int) 0x3 <<  8) // (TWI) Three-byte internal device address
+#define AT91C_TWI_MREAD       ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction
+#define AT91C_TWI_DADR        ((unsigned int) 0x7F << 16) // (TWI) Device Address
+// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register --------
+#define AT91C_TWI_CLDIV       ((unsigned int) 0xFF <<  0) // (TWI) Clock Low Divider
+#define AT91C_TWI_CHDIV       ((unsigned int) 0xFF <<  8) // (TWI) Clock High Divider
+#define AT91C_TWI_CKDIV       ((unsigned int) 0x7 << 16) // (TWI) Clock Divider
+// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register --------
+#define AT91C_TWI_TXCOMP      ((unsigned int) 0x1 <<  0) // (TWI) Transmission Completed
+#define AT91C_TWI_RXRDY       ((unsigned int) 0x1 <<  1) // (TWI) Receive holding register ReaDY
+#define AT91C_TWI_TXRDY       ((unsigned int) 0x1 <<  2) // (TWI) Transmit holding register ReaDY
+#define AT91C_TWI_OVRE        ((unsigned int) 0x1 <<  6) // (TWI) Overrun Error
+#define AT91C_TWI_UNRE        ((unsigned int) 0x1 <<  7) // (TWI) Underrun Error
+#define AT91C_TWI_NACK        ((unsigned int) 0x1 <<  8) // (TWI) Not Acknowledged
+// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register --------
+// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register --------
+// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
+// *****************************************************************************
+typedef struct _AT91S_PWMC_CH {
+	AT91_REG	 PWMC_CMR; 	// Channel Mode Register
+	AT91_REG	 PWMC_CDTYR; 	// Channel Duty Cycle Register
+	AT91_REG	 PWMC_CPRDR; 	// Channel Period Register
+	AT91_REG	 PWMC_CCNTR; 	// Channel Counter Register
+	AT91_REG	 PWMC_CUPDR; 	// Channel Update Register
+	AT91_REG	 PWMC_Reserved[3]; 	// Reserved
+} AT91S_PWMC_CH, *AT91PS_PWMC_CH;
+// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register --------
+#define AT91C_PWMC_CPRE       ((unsigned int) 0xF <<  0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
+#define 	AT91C_PWMC_CPRE_MCK                  ((unsigned int) 0x0) // (PWMC_CH)
+#define 	AT91C_PWMC_CPRE_MCKA                 ((unsigned int) 0xB) // (PWMC_CH)
+#define 	AT91C_PWMC_CPRE_MCKB                 ((unsigned int) 0xC) // (PWMC_CH)
+#define AT91C_PWMC_CALG       ((unsigned int) 0x1 <<  8) // (PWMC_CH) Channel Alignment
+#define AT91C_PWMC_CPOL       ((unsigned int) 0x1 <<  9) // (PWMC_CH) Channel Polarity
+#define AT91C_PWMC_CPD        ((unsigned int) 0x1 << 10) // (PWMC_CH) Channel Update Period
+// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register --------
+#define AT91C_PWMC_CDTY       ((unsigned int) 0x0 <<  0) // (PWMC_CH) Channel Duty Cycle
+// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register --------
+#define AT91C_PWMC_CPRD       ((unsigned int) 0x0 <<  0) // (PWMC_CH) Channel Period
+// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register --------
+#define AT91C_PWMC_CCNT       ((unsigned int) 0x0 <<  0) // (PWMC_CH) Channel Counter
+// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register --------
+#define AT91C_PWMC_CUPD       ((unsigned int) 0x0 <<  0) // (PWMC_CH) Channel Update
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
+// *****************************************************************************
+typedef struct _AT91S_PWMC {
+	AT91_REG	 PWMC_MR; 	// PWMC Mode Register
+	AT91_REG	 PWMC_ENA; 	// PWMC Enable Register
+	AT91_REG	 PWMC_DIS; 	// PWMC Disable Register
+	AT91_REG	 PWMC_SR; 	// PWMC Status Register
+	AT91_REG	 PWMC_IER; 	// PWMC Interrupt Enable Register
+	AT91_REG	 PWMC_IDR; 	// PWMC Interrupt Disable Register
+	AT91_REG	 PWMC_IMR; 	// PWMC Interrupt Mask Register
+	AT91_REG	 PWMC_ISR; 	// PWMC Interrupt Status Register
+	AT91_REG	 Reserved0[55]; 	//
+	AT91_REG	 PWMC_VR; 	// PWMC Version Register
+	AT91_REG	 Reserved1[64]; 	//
+	AT91S_PWMC_CH	 PWMC_CH[4]; 	// PWMC Channel
+} AT91S_PWMC, *AT91PS_PWMC;
+// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register --------
+#define AT91C_PWMC_DIVA       ((unsigned int) 0xFF <<  0) // (PWMC) CLKA divide factor.
+#define AT91C_PWMC_PREA       ((unsigned int) 0xF <<  8) // (PWMC) Divider Input Clock Prescaler A
+#define 	AT91C_PWMC_PREA_MCK                  ((unsigned int) 0x0 <<  8) // (PWMC)
+#define AT91C_PWMC_DIVB       ((unsigned int) 0xFF << 16) // (PWMC) CLKB divide factor.
+#define AT91C_PWMC_PREB       ((unsigned int) 0xF << 24) // (PWMC) Divider Input Clock Prescaler B
+#define 	AT91C_PWMC_PREB_MCK                  ((unsigned int) 0x0 << 24) // (PWMC)
+// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register --------
+#define AT91C_PWMC_CHID0      ((unsigned int) 0x1 <<  0) // (PWMC) Channel ID 0
+#define AT91C_PWMC_CHID1      ((unsigned int) 0x1 <<  1) // (PWMC) Channel ID 1
+#define AT91C_PWMC_CHID2      ((unsigned int) 0x1 <<  2) // (PWMC) Channel ID 2
+#define AT91C_PWMC_CHID3      ((unsigned int) 0x1 <<  3) // (PWMC) Channel ID 3
+// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register --------
+// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register --------
+// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register --------
+// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register --------
+// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register --------
+// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Device Interface
+// *****************************************************************************
+typedef struct _AT91S_UDP {
+	AT91_REG	 UDP_NUM; 	// Frame Number Register
+	AT91_REG	 UDP_GLBSTATE; 	// Global State Register
+	AT91_REG	 UDP_FADDR; 	// Function Address Register
+	AT91_REG	 Reserved0[1]; 	//
+	AT91_REG	 UDP_IER; 	// Interrupt Enable Register
+	AT91_REG	 UDP_IDR; 	// Interrupt Disable Register
+	AT91_REG	 UDP_IMR; 	// Interrupt Mask Register
+	AT91_REG	 UDP_ISR; 	// Interrupt Status Register
+	AT91_REG	 UDP_ICR; 	// Interrupt Clear Register
+	AT91_REG	 Reserved1[1]; 	//
+	AT91_REG	 UDP_RSTEP; 	// Reset Endpoint Register
+	AT91_REG	 Reserved2[1]; 	//
+	AT91_REG	 UDP_CSR[6]; 	// Endpoint Control and Status Register
+	AT91_REG	 Reserved3[2]; 	//
+	AT91_REG	 UDP_FDR[6]; 	// Endpoint FIFO Data Register
+	AT91_REG	 Reserved4[3]; 	//
+	AT91_REG	 UDP_TXVC; 	// Transceiver Control Register
+} AT91S_UDP, *AT91PS_UDP;
+// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register --------
+#define AT91C_UDP_FRM_NUM     ((unsigned int) 0x7FF <<  0) // (UDP) Frame Number as Defined in the Packet Field Formats
+#define AT91C_UDP_FRM_ERR     ((unsigned int) 0x1 << 16) // (UDP) Frame Error
+#define AT91C_UDP_FRM_OK      ((unsigned int) 0x1 << 17) // (UDP) Frame OK
+// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register --------
+#define AT91C_UDP_FADDEN      ((unsigned int) 0x1 <<  0) // (UDP) Function Address Enable
+#define AT91C_UDP_CONFG       ((unsigned int) 0x1 <<  1) // (UDP) Configured
+#define AT91C_UDP_ESR         ((unsigned int) 0x1 <<  2) // (UDP) Enable Send Resume
+#define AT91C_UDP_RSMINPR     ((unsigned int) 0x1 <<  3) // (UDP) A Resume Has Been Sent to the Host
+#define AT91C_UDP_RMWUPE      ((unsigned int) 0x1 <<  4) // (UDP) Remote Wake Up Enable
+// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register --------
+#define AT91C_UDP_FADD        ((unsigned int) 0xFF <<  0) // (UDP) Function Address Value
+#define AT91C_UDP_FEN         ((unsigned int) 0x1 <<  8) // (UDP) Function Enable
+// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register --------
+#define AT91C_UDP_EPINT0      ((unsigned int) 0x1 <<  0) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT1      ((unsigned int) 0x1 <<  1) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT2      ((unsigned int) 0x1 <<  2) // (UDP) Endpoint 2 Interrupt
+#define AT91C_UDP_EPINT3      ((unsigned int) 0x1 <<  3) // (UDP) Endpoint 3 Interrupt
+#define AT91C_UDP_EPINT4      ((unsigned int) 0x1 <<  4) // (UDP) Endpoint 4 Interrupt
+#define AT91C_UDP_EPINT5      ((unsigned int) 0x1 <<  5) // (UDP) Endpoint 5 Interrupt
+#define AT91C_UDP_RXSUSP      ((unsigned int) 0x1 <<  8) // (UDP) USB Suspend Interrupt
+#define AT91C_UDP_RXRSM       ((unsigned int) 0x1 <<  9) // (UDP) USB Resume Interrupt
+#define AT91C_UDP_EXTRSM      ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt
+#define AT91C_UDP_SOFINT      ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt
+#define AT91C_UDP_WAKEUP      ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt
+// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register --------
+// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register --------
+// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register --------
+#define AT91C_UDP_ENDBUSRES   ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
+// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register --------
+// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register --------
+#define AT91C_UDP_EP0         ((unsigned int) 0x1 <<  0) // (UDP) Reset Endpoint 0
+#define AT91C_UDP_EP1         ((unsigned int) 0x1 <<  1) // (UDP) Reset Endpoint 1
+#define AT91C_UDP_EP2         ((unsigned int) 0x1 <<  2) // (UDP) Reset Endpoint 2
+#define AT91C_UDP_EP3         ((unsigned int) 0x1 <<  3) // (UDP) Reset Endpoint 3
+#define AT91C_UDP_EP4         ((unsigned int) 0x1 <<  4) // (UDP) Reset Endpoint 4
+#define AT91C_UDP_EP5         ((unsigned int) 0x1 <<  5) // (UDP) Reset Endpoint 5
+// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register --------
+#define AT91C_UDP_TXCOMP      ((unsigned int) 0x1 <<  0) // (UDP) Generates an IN packet with data previously written in the DPR
+#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 <<  1) // (UDP) Receive Data Bank 0
+#define AT91C_UDP_RXSETUP     ((unsigned int) 0x1 <<  2) // (UDP) Sends STALL to the Host (Control endpoints)
+#define AT91C_UDP_ISOERROR    ((unsigned int) 0x1 <<  3) // (UDP) Isochronous error (Isochronous endpoints)
+#define AT91C_UDP_TXPKTRDY    ((unsigned int) 0x1 <<  4) // (UDP) Transmit Packet Ready
+#define AT91C_UDP_FORCESTALL  ((unsigned int) 0x1 <<  5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 <<  6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+#define AT91C_UDP_DIR         ((unsigned int) 0x1 <<  7) // (UDP) Transfer Direction
+#define AT91C_UDP_EPTYPE      ((unsigned int) 0x7 <<  8) // (UDP) Endpoint type
+#define 	AT91C_UDP_EPTYPE_CTRL                 ((unsigned int) 0x0 <<  8) // (UDP) Control
+#define 	AT91C_UDP_EPTYPE_ISO_OUT              ((unsigned int) 0x1 <<  8) // (UDP) Isochronous OUT
+#define 	AT91C_UDP_EPTYPE_BULK_OUT             ((unsigned int) 0x2 <<  8) // (UDP) Bulk OUT
+#define 	AT91C_UDP_EPTYPE_INT_OUT              ((unsigned int) 0x3 <<  8) // (UDP) Interrupt OUT
+#define 	AT91C_UDP_EPTYPE_ISO_IN               ((unsigned int) 0x5 <<  8) // (UDP) Isochronous IN
+#define 	AT91C_UDP_EPTYPE_BULK_IN              ((unsigned int) 0x6 <<  8) // (UDP) Bulk IN
+#define 	AT91C_UDP_EPTYPE_INT_IN               ((unsigned int) 0x7 <<  8) // (UDP) Interrupt IN
+#define AT91C_UDP_DTGLE       ((unsigned int) 0x1 << 11) // (UDP) Data Toggle
+#define AT91C_UDP_EPEDS       ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable
+#define AT91C_UDP_RXBYTECNT   ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
+// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register --------
+#define AT91C_UDP_TXVDIS      ((unsigned int) 0x1 <<  8) // (UDP)
+#define AT91C_UDP_PUON        ((unsigned int) 0x1 <<  9) // (UDP) Pull-up ON
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+// *****************************************************************************
+typedef struct _AT91S_TC {
+	AT91_REG	 TC_CCR; 	// Channel Control Register
+	AT91_REG	 TC_CMR; 	// Channel Mode Register (Capture Mode / Waveform Mode)
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 TC_CV; 	// Counter Value
+	AT91_REG	 TC_RA; 	// Register A
+	AT91_REG	 TC_RB; 	// Register B
+	AT91_REG	 TC_RC; 	// Register C
+	AT91_REG	 TC_SR; 	// Status Register
+	AT91_REG	 TC_IER; 	// Interrupt Enable Register
+	AT91_REG	 TC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 TC_IMR; 	// Interrupt Mask Register
+} AT91S_TC, *AT91PS_TC;
+// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register --------
+#define AT91C_TC_CLKEN        ((unsigned int) 0x1 <<  0) // (TC) Counter Clock Enable Command
+#define AT91C_TC_CLKDIS       ((unsigned int) 0x1 <<  1) // (TC) Counter Clock Disable Command
+#define AT91C_TC_SWTRG        ((unsigned int) 0x1 <<  2) // (TC) Software Trigger Command
+// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode --------
+#define AT91C_TC_CLKS         ((unsigned int) 0x7 <<  0) // (TC) Clock Selection
+#define 	AT91C_TC_CLKS_TIMER_DIV1_CLOCK     ((unsigned int) 0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV2_CLOCK     ((unsigned int) 0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV3_CLOCK     ((unsigned int) 0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV4_CLOCK     ((unsigned int) 0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV5_CLOCK     ((unsigned int) 0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK
+#define 	AT91C_TC_CLKS_XC0                  ((unsigned int) 0x5) // (TC) Clock selected: XC0
+#define 	AT91C_TC_CLKS_XC1                  ((unsigned int) 0x6) // (TC) Clock selected: XC1
+#define 	AT91C_TC_CLKS_XC2                  ((unsigned int) 0x7) // (TC) Clock selected: XC2
+#define AT91C_TC_CLKI         ((unsigned int) 0x1 <<  3) // (TC) Clock Invert
+#define AT91C_TC_BURST        ((unsigned int) 0x3 <<  4) // (TC) Burst Signal Selection
+#define 	AT91C_TC_BURST_NONE                 ((unsigned int) 0x0 <<  4) // (TC) The clock is not gated by an external signal
+#define 	AT91C_TC_BURST_XC0                  ((unsigned int) 0x1 <<  4) // (TC) XC0 is ANDed with the selected clock
+#define 	AT91C_TC_BURST_XC1                  ((unsigned int) 0x2 <<  4) // (TC) XC1 is ANDed with the selected clock
+#define 	AT91C_TC_BURST_XC2                  ((unsigned int) 0x3 <<  4) // (TC) XC2 is ANDed with the selected clock
+#define AT91C_TC_CPCSTOP      ((unsigned int) 0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
+#define AT91C_TC_LDBSTOP      ((unsigned int) 0x1 <<  6) // (TC) Counter Clock Stopped with RB Loading
+#define AT91C_TC_CPCDIS       ((unsigned int) 0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
+#define AT91C_TC_LDBDIS       ((unsigned int) 0x1 <<  7) // (TC) Counter Clock Disabled with RB Loading
+#define AT91C_TC_ETRGEDG      ((unsigned int) 0x3 <<  8) // (TC) External Trigger Edge Selection
+#define 	AT91C_TC_ETRGEDG_NONE                 ((unsigned int) 0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_ETRGEDG_RISING               ((unsigned int) 0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_ETRGEDG_FALLING              ((unsigned int) 0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_ETRGEDG_BOTH                 ((unsigned int) 0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVTEDG      ((unsigned int) 0x3 <<  8) // (TC) External Event Edge Selection
+#define 	AT91C_TC_EEVTEDG_NONE                 ((unsigned int) 0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_EEVTEDG_RISING               ((unsigned int) 0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_EEVTEDG_FALLING              ((unsigned int) 0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_EEVTEDG_BOTH                 ((unsigned int) 0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVT         ((unsigned int) 0x3 << 10) // (TC) External Event  Selection
+#define 	AT91C_TC_EEVT_TIOB                 ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
+#define 	AT91C_TC_EEVT_XC0                  ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
+#define 	AT91C_TC_EEVT_XC1                  ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
+#define 	AT91C_TC_EEVT_XC2                  ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
+#define AT91C_TC_ABETRG       ((unsigned int) 0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection
+#define AT91C_TC_ENETRG       ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable
+#define AT91C_TC_WAVESEL      ((unsigned int) 0x3 << 13) // (TC) Waveform  Selection
+#define 	AT91C_TC_WAVESEL_UP                   ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN               ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UP_AUTO              ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN_AUTO          ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
+#define AT91C_TC_CPCTRG       ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable
+#define AT91C_TC_WAVE         ((unsigned int) 0x1 << 15) // (TC)
+#define AT91C_TC_ACPA         ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA
+#define 	AT91C_TC_ACPA_NONE                 ((unsigned int) 0x0 << 16) // (TC) Effect: none
+#define 	AT91C_TC_ACPA_SET                  ((unsigned int) 0x1 << 16) // (TC) Effect: set
+#define 	AT91C_TC_ACPA_CLEAR                ((unsigned int) 0x2 << 16) // (TC) Effect: clear
+#define 	AT91C_TC_ACPA_TOGGLE               ((unsigned int) 0x3 << 16) // (TC) Effect: toggle
+#define AT91C_TC_LDRA         ((unsigned int) 0x3 << 16) // (TC) RA Loading Selection
+#define 	AT91C_TC_LDRA_NONE                 ((unsigned int) 0x0 << 16) // (TC) Edge: None
+#define 	AT91C_TC_LDRA_RISING               ((unsigned int) 0x1 << 16) // (TC) Edge: rising edge of TIOA
+#define 	AT91C_TC_LDRA_FALLING              ((unsigned int) 0x2 << 16) // (TC) Edge: falling edge of TIOA
+#define 	AT91C_TC_LDRA_BOTH                 ((unsigned int) 0x3 << 16) // (TC) Edge: each edge of TIOA
+#define AT91C_TC_ACPC         ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA
+#define 	AT91C_TC_ACPC_NONE                 ((unsigned int) 0x0 << 18) // (TC) Effect: none
+#define 	AT91C_TC_ACPC_SET                  ((unsigned int) 0x1 << 18) // (TC) Effect: set
+#define 	AT91C_TC_ACPC_CLEAR                ((unsigned int) 0x2 << 18) // (TC) Effect: clear
+#define 	AT91C_TC_ACPC_TOGGLE               ((unsigned int) 0x3 << 18) // (TC) Effect: toggle
+#define AT91C_TC_LDRB         ((unsigned int) 0x3 << 18) // (TC) RB Loading Selection
+#define 	AT91C_TC_LDRB_NONE                 ((unsigned int) 0x0 << 18) // (TC) Edge: None
+#define 	AT91C_TC_LDRB_RISING               ((unsigned int) 0x1 << 18) // (TC) Edge: rising edge of TIOA
+#define 	AT91C_TC_LDRB_FALLING              ((unsigned int) 0x2 << 18) // (TC) Edge: falling edge of TIOA
+#define 	AT91C_TC_LDRB_BOTH                 ((unsigned int) 0x3 << 18) // (TC) Edge: each edge of TIOA
+#define AT91C_TC_AEEVT        ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA
+#define 	AT91C_TC_AEEVT_NONE                 ((unsigned int) 0x0 << 20) // (TC) Effect: none
+#define 	AT91C_TC_AEEVT_SET                  ((unsigned int) 0x1 << 20) // (TC) Effect: set
+#define 	AT91C_TC_AEEVT_CLEAR                ((unsigned int) 0x2 << 20) // (TC) Effect: clear
+#define 	AT91C_TC_AEEVT_TOGGLE               ((unsigned int) 0x3 << 20) // (TC) Effect: toggle
+#define AT91C_TC_ASWTRG       ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA
+#define 	AT91C_TC_ASWTRG_NONE                 ((unsigned int) 0x0 << 22) // (TC) Effect: none
+#define 	AT91C_TC_ASWTRG_SET                  ((unsigned int) 0x1 << 22) // (TC) Effect: set
+#define 	AT91C_TC_ASWTRG_CLEAR                ((unsigned int) 0x2 << 22) // (TC) Effect: clear
+#define 	AT91C_TC_ASWTRG_TOGGLE               ((unsigned int) 0x3 << 22) // (TC) Effect: toggle
+#define AT91C_TC_BCPB         ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB
+#define 	AT91C_TC_BCPB_NONE                 ((unsigned int) 0x0 << 24) // (TC) Effect: none
+#define 	AT91C_TC_BCPB_SET                  ((unsigned int) 0x1 << 24) // (TC) Effect: set
+#define 	AT91C_TC_BCPB_CLEAR                ((unsigned int) 0x2 << 24) // (TC) Effect: clear
+#define 	AT91C_TC_BCPB_TOGGLE               ((unsigned int) 0x3 << 24) // (TC) Effect: toggle
+#define AT91C_TC_BCPC         ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB
+#define 	AT91C_TC_BCPC_NONE                 ((unsigned int) 0x0 << 26) // (TC) Effect: none
+#define 	AT91C_TC_BCPC_SET                  ((unsigned int) 0x1 << 26) // (TC) Effect: set
+#define 	AT91C_TC_BCPC_CLEAR                ((unsigned int) 0x2 << 26) // (TC) Effect: clear
+#define 	AT91C_TC_BCPC_TOGGLE               ((unsigned int) 0x3 << 26) // (TC) Effect: toggle
+#define AT91C_TC_BEEVT        ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB
+#define 	AT91C_TC_BEEVT_NONE                 ((unsigned int) 0x0 << 28) // (TC) Effect: none
+#define 	AT91C_TC_BEEVT_SET                  ((unsigned int) 0x1 << 28) // (TC) Effect: set
+#define 	AT91C_TC_BEEVT_CLEAR                ((unsigned int) 0x2 << 28) // (TC) Effect: clear
+#define 	AT91C_TC_BEEVT_TOGGLE               ((unsigned int) 0x3 << 28) // (TC) Effect: toggle
+#define AT91C_TC_BSWTRG       ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB
+#define 	AT91C_TC_BSWTRG_NONE                 ((unsigned int) 0x0 << 30) // (TC) Effect: none
+#define 	AT91C_TC_BSWTRG_SET                  ((unsigned int) 0x1 << 30) // (TC) Effect: set
+#define 	AT91C_TC_BSWTRG_CLEAR                ((unsigned int) 0x2 << 30) // (TC) Effect: clear
+#define 	AT91C_TC_BSWTRG_TOGGLE               ((unsigned int) 0x3 << 30) // (TC) Effect: toggle
+// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register --------
+#define AT91C_TC_COVFS        ((unsigned int) 0x1 <<  0) // (TC) Counter Overflow
+#define AT91C_TC_LOVRS        ((unsigned int) 0x1 <<  1) // (TC) Load Overrun
+#define AT91C_TC_CPAS         ((unsigned int) 0x1 <<  2) // (TC) RA Compare
+#define AT91C_TC_CPBS         ((unsigned int) 0x1 <<  3) // (TC) RB Compare
+#define AT91C_TC_CPCS         ((unsigned int) 0x1 <<  4) // (TC) RC Compare
+#define AT91C_TC_LDRAS        ((unsigned int) 0x1 <<  5) // (TC) RA Loading
+#define AT91C_TC_LDRBS        ((unsigned int) 0x1 <<  6) // (TC) RB Loading
+#define AT91C_TC_ETRGS        ((unsigned int) 0x1 <<  7) // (TC) External Trigger
+#define AT91C_TC_CLKSTA       ((unsigned int) 0x1 << 16) // (TC) Clock Enabling
+#define AT91C_TC_MTIOA        ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror
+#define AT91C_TC_MTIOB        ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror
+// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register --------
+// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register --------
+// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+// *****************************************************************************
+typedef struct _AT91S_TCB {
+	AT91S_TC	 TCB_TC0; 	// TC Channel 0
+	AT91_REG	 Reserved0[4]; 	//
+	AT91S_TC	 TCB_TC1; 	// TC Channel 1
+	AT91_REG	 Reserved1[4]; 	//
+	AT91S_TC	 TCB_TC2; 	// TC Channel 2
+	AT91_REG	 Reserved2[4]; 	//
+	AT91_REG	 TCB_BCR; 	// TC Block Control Register
+	AT91_REG	 TCB_BMR; 	// TC Block Mode Register
+} AT91S_TCB, *AT91PS_TCB;
+// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register --------
+#define AT91C_TCB_SYNC        ((unsigned int) 0x1 <<  0) // (TCB) Synchro Command
+// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register --------
+#define AT91C_TCB_TC0XC0S     ((unsigned int) 0x3 <<  0) // (TCB) External Clock Signal 0 Selection
+#define 	AT91C_TCB_TC0XC0S_TCLK0                ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_NONE                 ((unsigned int) 0x1) // (TCB) None signal connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA1                ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA2                ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0
+#define AT91C_TCB_TC1XC1S     ((unsigned int) 0x3 <<  2) // (TCB) External Clock Signal 1 Selection
+#define 	AT91C_TCB_TC1XC1S_TCLK1                ((unsigned int) 0x0 <<  2) // (TCB) TCLK1 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_NONE                 ((unsigned int) 0x1 <<  2) // (TCB) None signal connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA0                ((unsigned int) 0x2 <<  2) // (TCB) TIOA0 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA2                ((unsigned int) 0x3 <<  2) // (TCB) TIOA2 connected to XC1
+#define AT91C_TCB_TC2XC2S     ((unsigned int) 0x3 <<  4) // (TCB) External Clock Signal 2 Selection
+#define 	AT91C_TCB_TC2XC2S_TCLK2                ((unsigned int) 0x0 <<  4) // (TCB) TCLK2 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_NONE                 ((unsigned int) 0x1 <<  4) // (TCB) None signal connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA0                ((unsigned int) 0x2 <<  4) // (TCB) TIOA0 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA1                ((unsigned int) 0x3 <<  4) // (TCB) TIOA2 connected to XC2
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
+// *****************************************************************************
+typedef struct _AT91S_CAN_MB {
+	AT91_REG	 CAN_MB_MMR; 	// MailBox Mode Register
+	AT91_REG	 CAN_MB_MAM; 	// MailBox Acceptance Mask Register
+	AT91_REG	 CAN_MB_MID; 	// MailBox ID Register
+	AT91_REG	 CAN_MB_MFID; 	// MailBox Family ID Register
+	AT91_REG	 CAN_MB_MSR; 	// MailBox Status Register
+	AT91_REG	 CAN_MB_MDL; 	// MailBox Data Low Register
+	AT91_REG	 CAN_MB_MDH; 	// MailBox Data High Register
+	AT91_REG	 CAN_MB_MCR; 	// MailBox Control Register
+} AT91S_CAN_MB, *AT91PS_CAN_MB;
+// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register --------
+#define AT91C_CAN_MTIMEMARK   ((unsigned int) 0xFFFF <<  0) // (CAN_MB) Mailbox Timemark
+#define AT91C_CAN_PRIOR       ((unsigned int) 0xF << 16) // (CAN_MB) Mailbox Priority
+#define AT91C_CAN_MOT         ((unsigned int) 0x7 << 24) // (CAN_MB) Mailbox Object Type
+#define 	AT91C_CAN_MOT_DIS                  ((unsigned int) 0x0 << 24) // (CAN_MB)
+#define 	AT91C_CAN_MOT_RX                   ((unsigned int) 0x1 << 24) // (CAN_MB)
+#define 	AT91C_CAN_MOT_RXOVERWRITE          ((unsigned int) 0x2 << 24) // (CAN_MB)
+#define 	AT91C_CAN_MOT_TX                   ((unsigned int) 0x3 << 24) // (CAN_MB)
+#define 	AT91C_CAN_MOT_CONSUMER             ((unsigned int) 0x4 << 24) // (CAN_MB)
+#define 	AT91C_CAN_MOT_PRODUCER             ((unsigned int) 0x5 << 24) // (CAN_MB)
+// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register --------
+#define AT91C_CAN_MIDvB       ((unsigned int) 0x3FFFF <<  0) // (CAN_MB) Complementary bits for identifier in extended mode
+#define AT91C_CAN_MIDvA       ((unsigned int) 0x7FF << 18) // (CAN_MB) Identifier for standard frame mode
+#define AT91C_CAN_MIDE        ((unsigned int) 0x1 << 29) // (CAN_MB) Identifier Version
+// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register --------
+// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register --------
+// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register --------
+#define AT91C_CAN_MTIMESTAMP  ((unsigned int) 0xFFFF <<  0) // (CAN_MB) Timer Value
+#define AT91C_CAN_MDLC        ((unsigned int) 0xF << 16) // (CAN_MB) Mailbox Data Length Code
+#define AT91C_CAN_MRTR        ((unsigned int) 0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request
+#define AT91C_CAN_MABT        ((unsigned int) 0x1 << 22) // (CAN_MB) Mailbox Message Abort
+#define AT91C_CAN_MRDY        ((unsigned int) 0x1 << 23) // (CAN_MB) Mailbox Ready
+#define AT91C_CAN_MMI         ((unsigned int) 0x1 << 24) // (CAN_MB) Mailbox Message Ignored
+// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register --------
+// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register --------
+// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register --------
+#define AT91C_CAN_MACR        ((unsigned int) 0x1 << 22) // (CAN_MB) Abort Request for Mailbox
+#define AT91C_CAN_MTCR        ((unsigned int) 0x1 << 23) // (CAN_MB) Mailbox Transfer Command
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Control Area Network Interface
+// *****************************************************************************
+typedef struct _AT91S_CAN {
+	AT91_REG	 CAN_MR; 	// Mode Register
+	AT91_REG	 CAN_IER; 	// Interrupt Enable Register
+	AT91_REG	 CAN_IDR; 	// Interrupt Disable Register
+	AT91_REG	 CAN_IMR; 	// Interrupt Mask Register
+	AT91_REG	 CAN_SR; 	// Status Register
+	AT91_REG	 CAN_BR; 	// Baudrate Register
+	AT91_REG	 CAN_TIM; 	// Timer Register
+	AT91_REG	 CAN_TIMESTP; 	// Time Stamp Register
+	AT91_REG	 CAN_ECR; 	// Error Counter Register
+	AT91_REG	 CAN_TCR; 	// Transfer Command Register
+	AT91_REG	 CAN_ACR; 	// Abort Command Register
+	AT91_REG	 Reserved0[52]; 	//
+	AT91_REG	 CAN_VR; 	// Version Register
+	AT91_REG	 Reserved1[64]; 	//
+	AT91S_CAN_MB	 CAN_MB0; 	// CAN Mailbox 0
+	AT91S_CAN_MB	 CAN_MB1; 	// CAN Mailbox 1
+	AT91S_CAN_MB	 CAN_MB2; 	// CAN Mailbox 2
+	AT91S_CAN_MB	 CAN_MB3; 	// CAN Mailbox 3
+	AT91S_CAN_MB	 CAN_MB4; 	// CAN Mailbox 4
+	AT91S_CAN_MB	 CAN_MB5; 	// CAN Mailbox 5
+	AT91S_CAN_MB	 CAN_MB6; 	// CAN Mailbox 6
+	AT91S_CAN_MB	 CAN_MB7; 	// CAN Mailbox 7
+	AT91S_CAN_MB	 CAN_MB8; 	// CAN Mailbox 8
+	AT91S_CAN_MB	 CAN_MB9; 	// CAN Mailbox 9
+	AT91S_CAN_MB	 CAN_MB10; 	// CAN Mailbox 10
+	AT91S_CAN_MB	 CAN_MB11; 	// CAN Mailbox 11
+	AT91S_CAN_MB	 CAN_MB12; 	// CAN Mailbox 12
+	AT91S_CAN_MB	 CAN_MB13; 	// CAN Mailbox 13
+	AT91S_CAN_MB	 CAN_MB14; 	// CAN Mailbox 14
+	AT91S_CAN_MB	 CAN_MB15; 	// CAN Mailbox 15
+} AT91S_CAN, *AT91PS_CAN;
+// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register --------
+#define AT91C_CAN_CANEN       ((unsigned int) 0x1 <<  0) // (CAN) CAN Controller Enable
+#define AT91C_CAN_LPM         ((unsigned int) 0x1 <<  1) // (CAN) Disable/Enable Low Power Mode
+#define AT91C_CAN_ABM         ((unsigned int) 0x1 <<  2) // (CAN) Disable/Enable Autobaud/Listen Mode
+#define AT91C_CAN_OVL         ((unsigned int) 0x1 <<  3) // (CAN) Disable/Enable Overload Frame
+#define AT91C_CAN_TEOF        ((unsigned int) 0x1 <<  4) // (CAN) Time Stamp messages at each end of Frame
+#define AT91C_CAN_TTM         ((unsigned int) 0x1 <<  5) // (CAN) Disable/Enable Time Trigger Mode
+#define AT91C_CAN_TIMFRZ      ((unsigned int) 0x1 <<  6) // (CAN) Enable Timer Freeze
+#define AT91C_CAN_DRPT        ((unsigned int) 0x1 <<  7) // (CAN) Disable Repeat
+// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register --------
+#define AT91C_CAN_MB0         ((unsigned int) 0x1 <<  0) // (CAN) Mailbox 0 Flag
+#define AT91C_CAN_MB1         ((unsigned int) 0x1 <<  1) // (CAN) Mailbox 1 Flag
+#define AT91C_CAN_MB2         ((unsigned int) 0x1 <<  2) // (CAN) Mailbox 2 Flag
+#define AT91C_CAN_MB3         ((unsigned int) 0x1 <<  3) // (CAN) Mailbox 3 Flag
+#define AT91C_CAN_MB4         ((unsigned int) 0x1 <<  4) // (CAN) Mailbox 4 Flag
+#define AT91C_CAN_MB5         ((unsigned int) 0x1 <<  5) // (CAN) Mailbox 5 Flag
+#define AT91C_CAN_MB6         ((unsigned int) 0x1 <<  6) // (CAN) Mailbox 6 Flag
+#define AT91C_CAN_MB7         ((unsigned int) 0x1 <<  7) // (CAN) Mailbox 7 Flag
+#define AT91C_CAN_MB8         ((unsigned int) 0x1 <<  8) // (CAN) Mailbox 8 Flag
+#define AT91C_CAN_MB9         ((unsigned int) 0x1 <<  9) // (CAN) Mailbox 9 Flag
+#define AT91C_CAN_MB10        ((unsigned int) 0x1 << 10) // (CAN) Mailbox 10 Flag
+#define AT91C_CAN_MB11        ((unsigned int) 0x1 << 11) // (CAN) Mailbox 11 Flag
+#define AT91C_CAN_MB12        ((unsigned int) 0x1 << 12) // (CAN) Mailbox 12 Flag
+#define AT91C_CAN_MB13        ((unsigned int) 0x1 << 13) // (CAN) Mailbox 13 Flag
+#define AT91C_CAN_MB14        ((unsigned int) 0x1 << 14) // (CAN) Mailbox 14 Flag
+#define AT91C_CAN_MB15        ((unsigned int) 0x1 << 15) // (CAN) Mailbox 15 Flag
+#define AT91C_CAN_ERRA        ((unsigned int) 0x1 << 16) // (CAN) Error Active Mode Flag
+#define AT91C_CAN_WARN        ((unsigned int) 0x1 << 17) // (CAN) Warning Limit Flag
+#define AT91C_CAN_ERRP        ((unsigned int) 0x1 << 18) // (CAN) Error Passive Mode Flag
+#define AT91C_CAN_BOFF        ((unsigned int) 0x1 << 19) // (CAN) Bus Off Mode Flag
+#define AT91C_CAN_SLEEP       ((unsigned int) 0x1 << 20) // (CAN) Sleep Flag
+#define AT91C_CAN_WAKEUP      ((unsigned int) 0x1 << 21) // (CAN) Wakeup Flag
+#define AT91C_CAN_TOVF        ((unsigned int) 0x1 << 22) // (CAN) Timer Overflow Flag
+#define AT91C_CAN_TSTP        ((unsigned int) 0x1 << 23) // (CAN) Timestamp Flag
+#define AT91C_CAN_CERR        ((unsigned int) 0x1 << 24) // (CAN) CRC Error
+#define AT91C_CAN_SERR        ((unsigned int) 0x1 << 25) // (CAN) Stuffing Error
+#define AT91C_CAN_AERR        ((unsigned int) 0x1 << 26) // (CAN) Acknowledgment Error
+#define AT91C_CAN_FERR        ((unsigned int) 0x1 << 27) // (CAN) Form Error
+#define AT91C_CAN_BERR        ((unsigned int) 0x1 << 28) // (CAN) Bit Error
+// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register --------
+// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register --------
+// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register --------
+#define AT91C_CAN_RBSY        ((unsigned int) 0x1 << 29) // (CAN) Receiver Busy
+#define AT91C_CAN_TBSY        ((unsigned int) 0x1 << 30) // (CAN) Transmitter Busy
+#define AT91C_CAN_OVLY        ((unsigned int) 0x1 << 31) // (CAN) Overload Busy
+// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register --------
+#define AT91C_CAN_PHASE2      ((unsigned int) 0x7 <<  0) // (CAN) Phase 2 segment
+#define AT91C_CAN_PHASE1      ((unsigned int) 0x7 <<  4) // (CAN) Phase 1 segment
+#define AT91C_CAN_PROPAG      ((unsigned int) 0x7 <<  8) // (CAN) Programmation time segment
+#define AT91C_CAN_SYNC        ((unsigned int) 0x3 << 12) // (CAN) Re-synchronization jump width segment
+#define AT91C_CAN_BRP         ((unsigned int) 0x7F << 16) // (CAN) Baudrate Prescaler
+#define AT91C_CAN_SMP         ((unsigned int) 0x1 << 24) // (CAN) Sampling mode
+// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register --------
+#define AT91C_CAN_TIMER       ((unsigned int) 0xFFFF <<  0) // (CAN) Timer field
+// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register --------
+// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register --------
+#define AT91C_CAN_REC         ((unsigned int) 0xFF <<  0) // (CAN) Receive Error Counter
+#define AT91C_CAN_TEC         ((unsigned int) 0xFF << 16) // (CAN) Transmit Error Counter
+// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register --------
+#define AT91C_CAN_TIMRST      ((unsigned int) 0x1 << 31) // (CAN) Timer Reset Field
+// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register --------
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
+// *****************************************************************************
+typedef struct _AT91S_EMAC {
+	AT91_REG	 EMAC_NCR; 	// Network Control Register
+	AT91_REG	 EMAC_NCFGR; 	// Network Configuration Register
+	AT91_REG	 EMAC_NSR; 	// Network Status Register
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 EMAC_TSR; 	// Transmit Status Register
+	AT91_REG	 EMAC_RBQP; 	// Receive Buffer Queue Pointer
+	AT91_REG	 EMAC_TBQP; 	// Transmit Buffer Queue Pointer
+	AT91_REG	 EMAC_RSR; 	// Receive Status Register
+	AT91_REG	 EMAC_ISR; 	// Interrupt Status Register
+	AT91_REG	 EMAC_IER; 	// Interrupt Enable Register
+	AT91_REG	 EMAC_IDR; 	// Interrupt Disable Register
+	AT91_REG	 EMAC_IMR; 	// Interrupt Mask Register
+	AT91_REG	 EMAC_MAN; 	// PHY Maintenance Register
+	AT91_REG	 EMAC_PTR; 	// Pause Time Register
+	AT91_REG	 EMAC_PFR; 	// Pause Frames received Register
+	AT91_REG	 EMAC_FTO; 	// Frames Transmitted OK Register
+	AT91_REG	 EMAC_SCF; 	// Single Collision Frame Register
+	AT91_REG	 EMAC_MCF; 	// Multiple Collision Frame Register
+	AT91_REG	 EMAC_FRO; 	// Frames Received OK Register
+	AT91_REG	 EMAC_FCSE; 	// Frame Check Sequence Error Register
+	AT91_REG	 EMAC_ALE; 	// Alignment Error Register
+	AT91_REG	 EMAC_DTF; 	// Deferred Transmission Frame Register
+	AT91_REG	 EMAC_LCOL; 	// Late Collision Register
+	AT91_REG	 EMAC_ECOL; 	// Excessive Collision Register
+	AT91_REG	 EMAC_TUND; 	// Transmit Underrun Error Register
+	AT91_REG	 EMAC_CSE; 	// Carrier Sense Error Register
+	AT91_REG	 EMAC_RRE; 	// Receive Ressource Error Register
+	AT91_REG	 EMAC_ROV; 	// Receive Overrun Errors Register
+	AT91_REG	 EMAC_RSE; 	// Receive Symbol Errors Register
+	AT91_REG	 EMAC_ELE; 	// Excessive Length Errors Register
+	AT91_REG	 EMAC_RJA; 	// Receive Jabbers Register
+	AT91_REG	 EMAC_USF; 	// Undersize Frames Register
+	AT91_REG	 EMAC_STE; 	// SQE Test Error Register
+	AT91_REG	 EMAC_RLE; 	// Receive Length Field Mismatch Register
+	AT91_REG	 EMAC_TPF; 	// Transmitted Pause Frames Register
+	AT91_REG	 EMAC_HRB; 	// Hash Address Bottom[31:0]
+	AT91_REG	 EMAC_HRT; 	// Hash Address Top[63:32]
+	AT91_REG	 EMAC_SA1L; 	// Specific Address 1 Bottom, First 4 bytes
+	AT91_REG	 EMAC_SA1H; 	// Specific Address 1 Top, Last 2 bytes
+	AT91_REG	 EMAC_SA2L; 	// Specific Address 2 Bottom, First 4 bytes
+	AT91_REG	 EMAC_SA2H; 	// Specific Address 2 Top, Last 2 bytes
+	AT91_REG	 EMAC_SA3L; 	// Specific Address 3 Bottom, First 4 bytes
+	AT91_REG	 EMAC_SA3H; 	// Specific Address 3 Top, Last 2 bytes
+	AT91_REG	 EMAC_SA4L; 	// Specific Address 4 Bottom, First 4 bytes
+	AT91_REG	 EMAC_SA4H; 	// Specific Address 4 Top, Last 2 bytes
+	AT91_REG	 EMAC_TID; 	// Type ID Checking Register
+	AT91_REG	 EMAC_TPQ; 	// Transmit Pause Quantum Register
+	AT91_REG	 EMAC_USRIO; 	// USER Input/Output Register
+	AT91_REG	 EMAC_WOL; 	// Wake On LAN Register
+	AT91_REG	 Reserved1[13]; 	//
+	AT91_REG	 EMAC_REV; 	// Revision Register
+} AT91S_EMAC, *AT91PS_EMAC;
+// -------- EMAC_NCR : (EMAC Offset: 0x0)  --------
+#define AT91C_EMAC_LB         ((unsigned int) 0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+#define AT91C_EMAC_LLB        ((unsigned int) 0x1 <<  1) // (EMAC) Loopback local.
+#define AT91C_EMAC_RE         ((unsigned int) 0x1 <<  2) // (EMAC) Receive enable.
+#define AT91C_EMAC_TE         ((unsigned int) 0x1 <<  3) // (EMAC) Transmit enable.
+#define AT91C_EMAC_MPE        ((unsigned int) 0x1 <<  4) // (EMAC) Management port enable.
+#define AT91C_EMAC_CLRSTAT    ((unsigned int) 0x1 <<  5) // (EMAC) Clear statistics registers.
+#define AT91C_EMAC_INCSTAT    ((unsigned int) 0x1 <<  6) // (EMAC) Increment statistics registers.
+#define AT91C_EMAC_WESTAT     ((unsigned int) 0x1 <<  7) // (EMAC) Write enable for statistics registers.
+#define AT91C_EMAC_BP         ((unsigned int) 0x1 <<  8) // (EMAC) Back pressure.
+#define AT91C_EMAC_TSTART     ((unsigned int) 0x1 <<  9) // (EMAC) Start Transmission.
+#define AT91C_EMAC_THALT      ((unsigned int) 0x1 << 10) // (EMAC) Transmission Halt.
+#define AT91C_EMAC_TPFR       ((unsigned int) 0x1 << 11) // (EMAC) Transmit pause frame
+#define AT91C_EMAC_TZQ        ((unsigned int) 0x1 << 12) // (EMAC) Transmit zero quantum pause frame
+// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register --------
+#define AT91C_EMAC_SPD        ((unsigned int) 0x1 <<  0) // (EMAC) Speed.
+#define AT91C_EMAC_FD         ((unsigned int) 0x1 <<  1) // (EMAC) Full duplex.
+#define AT91C_EMAC_JFRAME     ((unsigned int) 0x1 <<  3) // (EMAC) Jumbo Frames.
+#define AT91C_EMAC_CAF        ((unsigned int) 0x1 <<  4) // (EMAC) Copy all frames.
+#define AT91C_EMAC_NBC        ((unsigned int) 0x1 <<  5) // (EMAC) No broadcast.
+#define AT91C_EMAC_MTI        ((unsigned int) 0x1 <<  6) // (EMAC) Multicast hash event enable
+#define AT91C_EMAC_UNI        ((unsigned int) 0x1 <<  7) // (EMAC) Unicast hash enable.
+#define AT91C_EMAC_BIG        ((unsigned int) 0x1 <<  8) // (EMAC) Receive 1522 bytes.
+#define AT91C_EMAC_EAE        ((unsigned int) 0x1 <<  9) // (EMAC) External address match enable.
+#define AT91C_EMAC_CLK        ((unsigned int) 0x3 << 10) // (EMAC)
+#define 	AT91C_EMAC_CLK_HCLK_8               ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8
+#define 	AT91C_EMAC_CLK_HCLK_16              ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16
+#define 	AT91C_EMAC_CLK_HCLK_32              ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32
+#define 	AT91C_EMAC_CLK_HCLK_64              ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64
+#define AT91C_EMAC_RTY        ((unsigned int) 0x1 << 12) // (EMAC)
+#define AT91C_EMAC_PAE        ((unsigned int) 0x1 << 13) // (EMAC)
+#define AT91C_EMAC_RBOF       ((unsigned int) 0x3 << 14) // (EMAC)
+#define 	AT91C_EMAC_RBOF_OFFSET_0             ((unsigned int) 0x0 << 14) // (EMAC) no offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_1             ((unsigned int) 0x1 << 14) // (EMAC) one byte offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_2             ((unsigned int) 0x2 << 14) // (EMAC) two bytes offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_3             ((unsigned int) 0x3 << 14) // (EMAC) three bytes offset from start of receive buffer
+#define AT91C_EMAC_RLCE       ((unsigned int) 0x1 << 16) // (EMAC) Receive Length field Checking Enable
+#define AT91C_EMAC_DRFCS      ((unsigned int) 0x1 << 17) // (EMAC) Discard Receive FCS
+#define AT91C_EMAC_EFRHD      ((unsigned int) 0x1 << 18) // (EMAC)
+#define AT91C_EMAC_IRXFCS     ((unsigned int) 0x1 << 19) // (EMAC) Ignore RX FCS
+// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register --------
+#define AT91C_EMAC_LINKR      ((unsigned int) 0x1 <<  0) // (EMAC)
+#define AT91C_EMAC_MDIO       ((unsigned int) 0x1 <<  1) // (EMAC)
+#define AT91C_EMAC_IDLE       ((unsigned int) 0x1 <<  2) // (EMAC)
+// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register --------
+#define AT91C_EMAC_UBR        ((unsigned int) 0x1 <<  0) // (EMAC)
+#define AT91C_EMAC_COL        ((unsigned int) 0x1 <<  1) // (EMAC)
+#define AT91C_EMAC_RLES       ((unsigned int) 0x1 <<  2) // (EMAC)
+#define AT91C_EMAC_TGO        ((unsigned int) 0x1 <<  3) // (EMAC) Transmit Go
+#define AT91C_EMAC_BEX        ((unsigned int) 0x1 <<  4) // (EMAC) Buffers exhausted mid frame
+#define AT91C_EMAC_COMP       ((unsigned int) 0x1 <<  5) // (EMAC)
+#define AT91C_EMAC_UND        ((unsigned int) 0x1 <<  6) // (EMAC)
+// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register --------
+#define AT91C_EMAC_BNA        ((unsigned int) 0x1 <<  0) // (EMAC)
+#define AT91C_EMAC_REC        ((unsigned int) 0x1 <<  1) // (EMAC)
+#define AT91C_EMAC_OVR        ((unsigned int) 0x1 <<  2) // (EMAC)
+// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register --------
+#define AT91C_EMAC_MFD        ((unsigned int) 0x1 <<  0) // (EMAC)
+#define AT91C_EMAC_RCOMP      ((unsigned int) 0x1 <<  1) // (EMAC)
+#define AT91C_EMAC_RXUBR      ((unsigned int) 0x1 <<  2) // (EMAC)
+#define AT91C_EMAC_TXUBR      ((unsigned int) 0x1 <<  3) // (EMAC)
+#define AT91C_EMAC_TUNDR      ((unsigned int) 0x1 <<  4) // (EMAC)
+#define AT91C_EMAC_RLEX       ((unsigned int) 0x1 <<  5) // (EMAC)
+#define AT91C_EMAC_TXERR      ((unsigned int) 0x1 <<  6) // (EMAC)
+#define AT91C_EMAC_TCOMP      ((unsigned int) 0x1 <<  7) // (EMAC)
+#define AT91C_EMAC_LINK       ((unsigned int) 0x1 <<  9) // (EMAC)
+#define AT91C_EMAC_ROVR       ((unsigned int) 0x1 << 10) // (EMAC)
+#define AT91C_EMAC_HRESP      ((unsigned int) 0x1 << 11) // (EMAC)
+#define AT91C_EMAC_PFRE       ((unsigned int) 0x1 << 12) // (EMAC)
+#define AT91C_EMAC_PTZ        ((unsigned int) 0x1 << 13) // (EMAC)
+// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register --------
+// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register --------
+// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register --------
+// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register --------
+#define AT91C_EMAC_DATA       ((unsigned int) 0xFFFF <<  0) // (EMAC)
+#define AT91C_EMAC_CODE       ((unsigned int) 0x3 << 16) // (EMAC)
+#define AT91C_EMAC_REGA       ((unsigned int) 0x1F << 18) // (EMAC)
+#define AT91C_EMAC_PHYA       ((unsigned int) 0x1F << 23) // (EMAC)
+#define AT91C_EMAC_RW         ((unsigned int) 0x3 << 28) // (EMAC)
+#define AT91C_EMAC_SOF        ((unsigned int) 0x3 << 30) // (EMAC)
+// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register --------
+#define AT91C_EMAC_RMII       ((unsigned int) 0x1 <<  0) // (EMAC) Reduce MII
+#define AT91C_EMAC_CLKEN      ((unsigned int) 0x1 <<  1) // (EMAC) Clock Enable
+// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register --------
+#define AT91C_EMAC_IP         ((unsigned int) 0xFFFF <<  0) // (EMAC) ARP request IP address
+#define AT91C_EMAC_MAG        ((unsigned int) 0x1 << 16) // (EMAC) Magic packet event enable
+#define AT91C_EMAC_ARP        ((unsigned int) 0x1 << 17) // (EMAC) ARP request event enable
+#define AT91C_EMAC_SA1        ((unsigned int) 0x1 << 18) // (EMAC) Specific address register 1 event enable
+// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register --------
+#define AT91C_EMAC_REVREF     ((unsigned int) 0xFFFF <<  0) // (EMAC)
+#define AT91C_EMAC_PARTREF    ((unsigned int) 0xFFFF << 16) // (EMAC)
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Analog to Digital Convertor
+// *****************************************************************************
+typedef struct _AT91S_ADC {
+	AT91_REG	 ADC_CR; 	// ADC Control Register
+	AT91_REG	 ADC_MR; 	// ADC Mode Register
+	AT91_REG	 Reserved0[2]; 	//
+	AT91_REG	 ADC_CHER; 	// ADC Channel Enable Register
+	AT91_REG	 ADC_CHDR; 	// ADC Channel Disable Register
+	AT91_REG	 ADC_CHSR; 	// ADC Channel Status Register
+	AT91_REG	 ADC_SR; 	// ADC Status Register
+	AT91_REG	 ADC_LCDR; 	// ADC Last Converted Data Register
+	AT91_REG	 ADC_IER; 	// ADC Interrupt Enable Register
+	AT91_REG	 ADC_IDR; 	// ADC Interrupt Disable Register
+	AT91_REG	 ADC_IMR; 	// ADC Interrupt Mask Register
+	AT91_REG	 ADC_CDR0; 	// ADC Channel Data Register 0
+	AT91_REG	 ADC_CDR1; 	// ADC Channel Data Register 1
+	AT91_REG	 ADC_CDR2; 	// ADC Channel Data Register 2
+	AT91_REG	 ADC_CDR3; 	// ADC Channel Data Register 3
+	AT91_REG	 ADC_CDR4; 	// ADC Channel Data Register 4
+	AT91_REG	 ADC_CDR5; 	// ADC Channel Data Register 5
+	AT91_REG	 ADC_CDR6; 	// ADC Channel Data Register 6
+	AT91_REG	 ADC_CDR7; 	// ADC Channel Data Register 7
+	AT91_REG	 Reserved1[44]; 	//
+	AT91_REG	 ADC_RPR; 	// Receive Pointer Register
+	AT91_REG	 ADC_RCR; 	// Receive Counter Register
+	AT91_REG	 ADC_TPR; 	// Transmit Pointer Register
+	AT91_REG	 ADC_TCR; 	// Transmit Counter Register
+	AT91_REG	 ADC_RNPR; 	// Receive Next Pointer Register
+	AT91_REG	 ADC_RNCR; 	// Receive Next Counter Register
+	AT91_REG	 ADC_TNPR; 	// Transmit Next Pointer Register
+	AT91_REG	 ADC_TNCR; 	// Transmit Next Counter Register
+	AT91_REG	 ADC_PTCR; 	// PDC Transfer Control Register
+	AT91_REG	 ADC_PTSR; 	// PDC Transfer Status Register
+} AT91S_ADC, *AT91PS_ADC;
+// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register --------
+#define AT91C_ADC_SWRST       ((unsigned int) 0x1 <<  0) // (ADC) Software Reset
+#define AT91C_ADC_START       ((unsigned int) 0x1 <<  1) // (ADC) Start Conversion
+// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register --------
+#define AT91C_ADC_TRGEN       ((unsigned int) 0x1 <<  0) // (ADC) Trigger Enable
+#define 	AT91C_ADC_TRGEN_DIS                  ((unsigned int) 0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
+#define 	AT91C_ADC_TRGEN_EN                   ((unsigned int) 0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled.
+#define AT91C_ADC_TRGSEL      ((unsigned int) 0x7 <<  1) // (ADC) Trigger Selection
+#define 	AT91C_ADC_TRGSEL_TIOA0                ((unsigned int) 0x0 <<  1) // (ADC) Selected TRGSEL = TIAO0
+#define 	AT91C_ADC_TRGSEL_TIOA1                ((unsigned int) 0x1 <<  1) // (ADC) Selected TRGSEL = TIAO1
+#define 	AT91C_ADC_TRGSEL_TIOA2                ((unsigned int) 0x2 <<  1) // (ADC) Selected TRGSEL = TIAO2
+#define 	AT91C_ADC_TRGSEL_TIOA3                ((unsigned int) 0x3 <<  1) // (ADC) Selected TRGSEL = TIAO3
+#define 	AT91C_ADC_TRGSEL_TIOA4                ((unsigned int) 0x4 <<  1) // (ADC) Selected TRGSEL = TIAO4
+#define 	AT91C_ADC_TRGSEL_TIOA5                ((unsigned int) 0x5 <<  1) // (ADC) Selected TRGSEL = TIAO5
+#define 	AT91C_ADC_TRGSEL_EXT                  ((unsigned int) 0x6 <<  1) // (ADC) Selected TRGSEL = External Trigger
+#define AT91C_ADC_LOWRES      ((unsigned int) 0x1 <<  4) // (ADC) Resolution.
+#define 	AT91C_ADC_LOWRES_10_BIT               ((unsigned int) 0x0 <<  4) // (ADC) 10-bit resolution
+#define 	AT91C_ADC_LOWRES_8_BIT                ((unsigned int) 0x1 <<  4) // (ADC) 8-bit resolution
+#define AT91C_ADC_SLEEP       ((unsigned int) 0x1 <<  5) // (ADC) Sleep Mode
+#define 	AT91C_ADC_SLEEP_NORMAL_MODE          ((unsigned int) 0x0 <<  5) // (ADC) Normal Mode
+#define 	AT91C_ADC_SLEEP_MODE                 ((unsigned int) 0x1 <<  5) // (ADC) Sleep Mode
+#define AT91C_ADC_PRESCAL     ((unsigned int) 0x3F <<  8) // (ADC) Prescaler rate selection
+#define AT91C_ADC_STARTUP     ((unsigned int) 0x1F << 16) // (ADC) Startup Time
+#define AT91C_ADC_SHTIM       ((unsigned int) 0xF << 24) // (ADC) Sample & Hold Time
+// -------- 	ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register --------
+#define AT91C_ADC_CH0         ((unsigned int) 0x1 <<  0) // (ADC) Channel 0
+#define AT91C_ADC_CH1         ((unsigned int) 0x1 <<  1) // (ADC) Channel 1
+#define AT91C_ADC_CH2         ((unsigned int) 0x1 <<  2) // (ADC) Channel 2
+#define AT91C_ADC_CH3         ((unsigned int) 0x1 <<  3) // (ADC) Channel 3
+#define AT91C_ADC_CH4         ((unsigned int) 0x1 <<  4) // (ADC) Channel 4
+#define AT91C_ADC_CH5         ((unsigned int) 0x1 <<  5) // (ADC) Channel 5
+#define AT91C_ADC_CH6         ((unsigned int) 0x1 <<  6) // (ADC) Channel 6
+#define AT91C_ADC_CH7         ((unsigned int) 0x1 <<  7) // (ADC) Channel 7
+// -------- 	ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register --------
+// -------- 	ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register --------
+// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register --------
+#define AT91C_ADC_EOC0        ((unsigned int) 0x1 <<  0) // (ADC) End of Conversion
+#define AT91C_ADC_EOC1        ((unsigned int) 0x1 <<  1) // (ADC) End of Conversion
+#define AT91C_ADC_EOC2        ((unsigned int) 0x1 <<  2) // (ADC) End of Conversion
+#define AT91C_ADC_EOC3        ((unsigned int) 0x1 <<  3) // (ADC) End of Conversion
+#define AT91C_ADC_EOC4        ((unsigned int) 0x1 <<  4) // (ADC) End of Conversion
+#define AT91C_ADC_EOC5        ((unsigned int) 0x1 <<  5) // (ADC) End of Conversion
+#define AT91C_ADC_EOC6        ((unsigned int) 0x1 <<  6) // (ADC) End of Conversion
+#define AT91C_ADC_EOC7        ((unsigned int) 0x1 <<  7) // (ADC) End of Conversion
+#define AT91C_ADC_OVRE0       ((unsigned int) 0x1 <<  8) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE1       ((unsigned int) 0x1 <<  9) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE2       ((unsigned int) 0x1 << 10) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE3       ((unsigned int) 0x1 << 11) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE4       ((unsigned int) 0x1 << 12) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE5       ((unsigned int) 0x1 << 13) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE6       ((unsigned int) 0x1 << 14) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE7       ((unsigned int) 0x1 << 15) // (ADC) Overrun Error
+#define AT91C_ADC_DRDY        ((unsigned int) 0x1 << 16) // (ADC) Data Ready
+#define AT91C_ADC_GOVRE       ((unsigned int) 0x1 << 17) // (ADC) General Overrun
+#define AT91C_ADC_ENDRX       ((unsigned int) 0x1 << 18) // (ADC) End of Receiver Transfer
+#define AT91C_ADC_RXBUFF      ((unsigned int) 0x1 << 19) // (ADC) RXBUFF Interrupt
+// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register --------
+#define AT91C_ADC_LDATA       ((unsigned int) 0x3FF <<  0) // (ADC) Last Data Converted
+// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register --------
+// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register --------
+// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register --------
+// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 --------
+#define AT91C_ADC_DATA        ((unsigned int) 0x3FF <<  0) // (ADC) Converted Data
+// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 --------
+// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 --------
+// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 --------
+// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 --------
+// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 --------
+// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 --------
+// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 --------
+// *****************************************************************************
+//               REGISTER ADDRESS DEFINITION FOR AT91SAM7X256
+// *****************************************************************************
+// ========== Register definition for SYS peripheral ==========
+// ========== Register definition for AIC peripheral ==========
+#define AT91C_AIC_IVR   ((AT91_REG *) 	0xFFFFF100) // (AIC) IRQ Vector Register
+#define AT91C_AIC_SMR   ((AT91_REG *) 	0xFFFFF000) // (AIC) Source Mode Register
+#define AT91C_AIC_FVR   ((AT91_REG *) 	0xFFFFF104) // (AIC) FIQ Vector Register
+#define AT91C_AIC_DCR   ((AT91_REG *) 	0xFFFFF138) // (AIC) Debug Control Register (Protect)
+#define AT91C_AIC_EOICR ((AT91_REG *) 	0xFFFFF130) // (AIC) End of Interrupt Command Register
+#define AT91C_AIC_SVR   ((AT91_REG *) 	0xFFFFF080) // (AIC) Source Vector Register
+#define AT91C_AIC_FFSR  ((AT91_REG *) 	0xFFFFF148) // (AIC) Fast Forcing Status Register
+#define AT91C_AIC_ICCR  ((AT91_REG *) 	0xFFFFF128) // (AIC) Interrupt Clear Command Register
+#define AT91C_AIC_ISR   ((AT91_REG *) 	0xFFFFF108) // (AIC) Interrupt Status Register
+#define AT91C_AIC_IMR   ((AT91_REG *) 	0xFFFFF110) // (AIC) Interrupt Mask Register
+#define AT91C_AIC_IPR   ((AT91_REG *) 	0xFFFFF10C) // (AIC) Interrupt Pending Register
+#define AT91C_AIC_FFER  ((AT91_REG *) 	0xFFFFF140) // (AIC) Fast Forcing Enable Register
+#define AT91C_AIC_IECR  ((AT91_REG *) 	0xFFFFF120) // (AIC) Interrupt Enable Command Register
+#define AT91C_AIC_ISCR  ((AT91_REG *) 	0xFFFFF12C) // (AIC) Interrupt Set Command Register
+#define AT91C_AIC_FFDR  ((AT91_REG *) 	0xFFFFF144) // (AIC) Fast Forcing Disable Register
+#define AT91C_AIC_CISR  ((AT91_REG *) 	0xFFFFF114) // (AIC) Core Interrupt Status Register
+#define AT91C_AIC_IDCR  ((AT91_REG *) 	0xFFFFF124) // (AIC) Interrupt Disable Command Register
+#define AT91C_AIC_SPU   ((AT91_REG *) 	0xFFFFF134) // (AIC) Spurious Vector Register
+// ========== Register definition for PDC_DBGU peripheral ==========
+#define AT91C_DBGU_TCR  ((AT91_REG *) 	0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
+#define AT91C_DBGU_RNPR ((AT91_REG *) 	0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
+#define AT91C_DBGU_TNPR ((AT91_REG *) 	0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
+#define AT91C_DBGU_TPR  ((AT91_REG *) 	0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
+#define AT91C_DBGU_RPR  ((AT91_REG *) 	0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
+#define AT91C_DBGU_RCR  ((AT91_REG *) 	0xFFFFF304) // (PDC_DBGU) Receive Counter Register
+#define AT91C_DBGU_RNCR ((AT91_REG *) 	0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
+#define AT91C_DBGU_PTCR ((AT91_REG *) 	0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
+#define AT91C_DBGU_PTSR ((AT91_REG *) 	0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
+#define AT91C_DBGU_TNCR ((AT91_REG *) 	0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
+// ========== Register definition for DBGU peripheral ==========
+#define AT91C_DBGU_EXID ((AT91_REG *) 	0xFFFFF244) // (DBGU) Chip ID Extension Register
+#define AT91C_DBGU_BRGR ((AT91_REG *) 	0xFFFFF220) // (DBGU) Baud Rate Generator Register
+#define AT91C_DBGU_IDR  ((AT91_REG *) 	0xFFFFF20C) // (DBGU) Interrupt Disable Register
+#define AT91C_DBGU_CSR  ((AT91_REG *) 	0xFFFFF214) // (DBGU) Channel Status Register
+#define AT91C_DBGU_CIDR ((AT91_REG *) 	0xFFFFF240) // (DBGU) Chip ID Register
+#define AT91C_DBGU_MR   ((AT91_REG *) 	0xFFFFF204) // (DBGU) Mode Register
+#define AT91C_DBGU_IMR  ((AT91_REG *) 	0xFFFFF210) // (DBGU) Interrupt Mask Register
+#define AT91C_DBGU_CR   ((AT91_REG *) 	0xFFFFF200) // (DBGU) Control Register
+#define AT91C_DBGU_FNTR ((AT91_REG *) 	0xFFFFF248) // (DBGU) Force NTRST Register
+#define AT91C_DBGU_THR  ((AT91_REG *) 	0xFFFFF21C) // (DBGU) Transmitter Holding Register
+#define AT91C_DBGU_RHR  ((AT91_REG *) 	0xFFFFF218) // (DBGU) Receiver Holding Register
+#define AT91C_DBGU_IER  ((AT91_REG *) 	0xFFFFF208) // (DBGU) Interrupt Enable Register
+// ========== Register definition for PIOA peripheral ==========
+#define AT91C_PIOA_ODR  ((AT91_REG *) 	0xFFFFF414) // (PIOA) Output Disable Registerr
+#define AT91C_PIOA_SODR ((AT91_REG *) 	0xFFFFF430) // (PIOA) Set Output Data Register
+#define AT91C_PIOA_ISR  ((AT91_REG *) 	0xFFFFF44C) // (PIOA) Interrupt Status Register
+#define AT91C_PIOA_ABSR ((AT91_REG *) 	0xFFFFF478) // (PIOA) AB Select Status Register
+#define AT91C_PIOA_IER  ((AT91_REG *) 	0xFFFFF440) // (PIOA) Interrupt Enable Register
+#define AT91C_PIOA_PPUDR ((AT91_REG *) 	0xFFFFF460) // (PIOA) Pull-up Disable Register
+#define AT91C_PIOA_IMR  ((AT91_REG *) 	0xFFFFF448) // (PIOA) Interrupt Mask Register
+#define AT91C_PIOA_PER  ((AT91_REG *) 	0xFFFFF400) // (PIOA) PIO Enable Register
+#define AT91C_PIOA_IFDR ((AT91_REG *) 	0xFFFFF424) // (PIOA) Input Filter Disable Register
+#define AT91C_PIOA_OWDR ((AT91_REG *) 	0xFFFFF4A4) // (PIOA) Output Write Disable Register
+#define AT91C_PIOA_MDSR ((AT91_REG *) 	0xFFFFF458) // (PIOA) Multi-driver Status Register
+#define AT91C_PIOA_IDR  ((AT91_REG *) 	0xFFFFF444) // (PIOA) Interrupt Disable Register
+#define AT91C_PIOA_ODSR ((AT91_REG *) 	0xFFFFF438) // (PIOA) Output Data Status Register
+#define AT91C_PIOA_PPUSR ((AT91_REG *) 	0xFFFFF468) // (PIOA) Pull-up Status Register
+#define AT91C_PIOA_OWSR ((AT91_REG *) 	0xFFFFF4A8) // (PIOA) Output Write Status Register
+#define AT91C_PIOA_BSR  ((AT91_REG *) 	0xFFFFF474) // (PIOA) Select B Register
+#define AT91C_PIOA_OWER ((AT91_REG *) 	0xFFFFF4A0) // (PIOA) Output Write Enable Register
+#define AT91C_PIOA_IFER ((AT91_REG *) 	0xFFFFF420) // (PIOA) Input Filter Enable Register
+#define AT91C_PIOA_PDSR ((AT91_REG *) 	0xFFFFF43C) // (PIOA) Pin Data Status Register
+#define AT91C_PIOA_PPUER ((AT91_REG *) 	0xFFFFF464) // (PIOA) Pull-up Enable Register
+#define AT91C_PIOA_OSR  ((AT91_REG *) 	0xFFFFF418) // (PIOA) Output Status Register
+#define AT91C_PIOA_ASR  ((AT91_REG *) 	0xFFFFF470) // (PIOA) Select A Register
+#define AT91C_PIOA_MDDR ((AT91_REG *) 	0xFFFFF454) // (PIOA) Multi-driver Disable Register
+#define AT91C_PIOA_CODR ((AT91_REG *) 	0xFFFFF434) // (PIOA) Clear Output Data Register
+#define AT91C_PIOA_MDER ((AT91_REG *) 	0xFFFFF450) // (PIOA) Multi-driver Enable Register
+#define AT91C_PIOA_PDR  ((AT91_REG *) 	0xFFFFF404) // (PIOA) PIO Disable Register
+#define AT91C_PIOA_IFSR ((AT91_REG *) 	0xFFFFF428) // (PIOA) Input Filter Status Register
+#define AT91C_PIOA_OER  ((AT91_REG *) 	0xFFFFF410) // (PIOA) Output Enable Register
+#define AT91C_PIOA_PSR  ((AT91_REG *) 	0xFFFFF408) // (PIOA) PIO Status Register
+// ========== Register definition for PIOB peripheral ==========
+#define AT91C_PIOB_OWDR ((AT91_REG *) 	0xFFFFF6A4) // (PIOB) Output Write Disable Register
+#define AT91C_PIOB_MDER ((AT91_REG *) 	0xFFFFF650) // (PIOB) Multi-driver Enable Register
+#define AT91C_PIOB_PPUSR ((AT91_REG *) 	0xFFFFF668) // (PIOB) Pull-up Status Register
+#define AT91C_PIOB_IMR  ((AT91_REG *) 	0xFFFFF648) // (PIOB) Interrupt Mask Register
+#define AT91C_PIOB_ASR  ((AT91_REG *) 	0xFFFFF670) // (PIOB) Select A Register
+#define AT91C_PIOB_PPUDR ((AT91_REG *) 	0xFFFFF660) // (PIOB) Pull-up Disable Register
+#define AT91C_PIOB_PSR  ((AT91_REG *) 	0xFFFFF608) // (PIOB) PIO Status Register
+#define AT91C_PIOB_IER  ((AT91_REG *) 	0xFFFFF640) // (PIOB) Interrupt Enable Register
+#define AT91C_PIOB_CODR ((AT91_REG *) 	0xFFFFF634) // (PIOB) Clear Output Data Register
+#define AT91C_PIOB_OWER ((AT91_REG *) 	0xFFFFF6A0) // (PIOB) Output Write Enable Register
+#define AT91C_PIOB_ABSR ((AT91_REG *) 	0xFFFFF678) // (PIOB) AB Select Status Register
+#define AT91C_PIOB_IFDR ((AT91_REG *) 	0xFFFFF624) // (PIOB) Input Filter Disable Register
+#define AT91C_PIOB_PDSR ((AT91_REG *) 	0xFFFFF63C) // (PIOB) Pin Data Status Register
+#define AT91C_PIOB_IDR  ((AT91_REG *) 	0xFFFFF644) // (PIOB) Interrupt Disable Register
+#define AT91C_PIOB_OWSR ((AT91_REG *) 	0xFFFFF6A8) // (PIOB) Output Write Status Register
+#define AT91C_PIOB_PDR  ((AT91_REG *) 	0xFFFFF604) // (PIOB) PIO Disable Register
+#define AT91C_PIOB_ODR  ((AT91_REG *) 	0xFFFFF614) // (PIOB) Output Disable Registerr
+#define AT91C_PIOB_IFSR ((AT91_REG *) 	0xFFFFF628) // (PIOB) Input Filter Status Register
+#define AT91C_PIOB_PPUER ((AT91_REG *) 	0xFFFFF664) // (PIOB) Pull-up Enable Register
+#define AT91C_PIOB_SODR ((AT91_REG *) 	0xFFFFF630) // (PIOB) Set Output Data Register
+#define AT91C_PIOB_ISR  ((AT91_REG *) 	0xFFFFF64C) // (PIOB) Interrupt Status Register
+#define AT91C_PIOB_ODSR ((AT91_REG *) 	0xFFFFF638) // (PIOB) Output Data Status Register
+#define AT91C_PIOB_OSR  ((AT91_REG *) 	0xFFFFF618) // (PIOB) Output Status Register
+#define AT91C_PIOB_MDSR ((AT91_REG *) 	0xFFFFF658) // (PIOB) Multi-driver Status Register
+#define AT91C_PIOB_IFER ((AT91_REG *) 	0xFFFFF620) // (PIOB) Input Filter Enable Register
+#define AT91C_PIOB_BSR  ((AT91_REG *) 	0xFFFFF674) // (PIOB) Select B Register
+#define AT91C_PIOB_MDDR ((AT91_REG *) 	0xFFFFF654) // (PIOB) Multi-driver Disable Register
+#define AT91C_PIOB_OER  ((AT91_REG *) 	0xFFFFF610) // (PIOB) Output Enable Register
+#define AT91C_PIOB_PER  ((AT91_REG *) 	0xFFFFF600) // (PIOB) PIO Enable Register
+// ========== Register definition for CKGR peripheral ==========
+#define AT91C_CKGR_MOR  ((AT91_REG *) 	0xFFFFFC20) // (CKGR) Main Oscillator Register
+#define AT91C_CKGR_PLLR ((AT91_REG *) 	0xFFFFFC2C) // (CKGR) PLL Register
+#define AT91C_CKGR_MCFR ((AT91_REG *) 	0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
+// ========== Register definition for PMC peripheral ==========
+#define AT91C_PMC_IDR   ((AT91_REG *) 	0xFFFFFC64) // (PMC) Interrupt Disable Register
+#define AT91C_PMC_MOR   ((AT91_REG *) 	0xFFFFFC20) // (PMC) Main Oscillator Register
+#define AT91C_PMC_PLLR  ((AT91_REG *) 	0xFFFFFC2C) // (PMC) PLL Register
+#define AT91C_PMC_PCER  ((AT91_REG *) 	0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
+#define AT91C_PMC_PCKR  ((AT91_REG *) 	0xFFFFFC40) // (PMC) Programmable Clock Register
+#define AT91C_PMC_MCKR  ((AT91_REG *) 	0xFFFFFC30) // (PMC) Master Clock Register
+#define AT91C_PMC_SCDR  ((AT91_REG *) 	0xFFFFFC04) // (PMC) System Clock Disable Register
+#define AT91C_PMC_PCDR  ((AT91_REG *) 	0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
+#define AT91C_PMC_SCSR  ((AT91_REG *) 	0xFFFFFC08) // (PMC) System Clock Status Register
+#define AT91C_PMC_PCSR  ((AT91_REG *) 	0xFFFFFC18) // (PMC) Peripheral Clock Status Register
+#define AT91C_PMC_MCFR  ((AT91_REG *) 	0xFFFFFC24) // (PMC) Main Clock  Frequency Register
+#define AT91C_PMC_SCER  ((AT91_REG *) 	0xFFFFFC00) // (PMC) System Clock Enable Register
+#define AT91C_PMC_IMR   ((AT91_REG *) 	0xFFFFFC6C) // (PMC) Interrupt Mask Register
+#define AT91C_PMC_IER   ((AT91_REG *) 	0xFFFFFC60) // (PMC) Interrupt Enable Register
+#define AT91C_PMC_SR    ((AT91_REG *) 	0xFFFFFC68) // (PMC) Status Register
+// ========== Register definition for RSTC peripheral ==========
+#define AT91C_RSTC_RCR  ((AT91_REG *) 	0xFFFFFD00) // (RSTC) Reset Control Register
+#define AT91C_RSTC_RMR  ((AT91_REG *) 	0xFFFFFD08) // (RSTC) Reset Mode Register
+#define AT91C_RSTC_RSR  ((AT91_REG *) 	0xFFFFFD04) // (RSTC) Reset Status Register
+// ========== Register definition for RTTC peripheral ==========
+#define AT91C_RTTC_RTSR ((AT91_REG *) 	0xFFFFFD2C) // (RTTC) Real-time Status Register
+#define AT91C_RTTC_RTMR ((AT91_REG *) 	0xFFFFFD20) // (RTTC) Real-time Mode Register
+#define AT91C_RTTC_RTVR ((AT91_REG *) 	0xFFFFFD28) // (RTTC) Real-time Value Register
+#define AT91C_RTTC_RTAR ((AT91_REG *) 	0xFFFFFD24) // (RTTC) Real-time Alarm Register
+// ========== Register definition for PITC peripheral ==========
+#define AT91C_PITC_PIVR ((AT91_REG *) 	0xFFFFFD38) // (PITC) Period Interval Value Register
+#define AT91C_PITC_PISR ((AT91_REG *) 	0xFFFFFD34) // (PITC) Period Interval Status Register
+#define AT91C_PITC_PIIR ((AT91_REG *) 	0xFFFFFD3C) // (PITC) Period Interval Image Register
+#define AT91C_PITC_PIMR ((AT91_REG *) 	0xFFFFFD30) // (PITC) Period Interval Mode Register
+// ========== Register definition for WDTC peripheral ==========
+#define AT91C_WDTC_WDCR ((AT91_REG *) 	0xFFFFFD40) // (WDTC) Watchdog Control Register
+#define AT91C_WDTC_WDSR ((AT91_REG *) 	0xFFFFFD48) // (WDTC) Watchdog Status Register
+#define AT91C_WDTC_WDMR ((AT91_REG *) 	0xFFFFFD44) // (WDTC) Watchdog Mode Register
+// ========== Register definition for VREG peripheral ==========
+#define AT91C_VREG_MR   ((AT91_REG *) 	0xFFFFFD60) // (VREG) Voltage Regulator Mode Register
+// ========== Register definition for MC peripheral ==========
+#define AT91C_MC_ASR    ((AT91_REG *) 	0xFFFFFF04) // (MC) MC Abort Status Register
+#define AT91C_MC_RCR    ((AT91_REG *) 	0xFFFFFF00) // (MC) MC Remap Control Register
+#define AT91C_MC_FCR    ((AT91_REG *) 	0xFFFFFF64) // (MC) MC Flash Command Register
+#define AT91C_MC_AASR   ((AT91_REG *) 	0xFFFFFF08) // (MC) MC Abort Address Status Register
+#define AT91C_MC_FSR    ((AT91_REG *) 	0xFFFFFF68) // (MC) MC Flash Status Register
+#define AT91C_MC_FMR    ((AT91_REG *) 	0xFFFFFF60) // (MC) MC Flash Mode Register
+// ========== Register definition for PDC_SPI1 peripheral ==========
+#define AT91C_SPI1_PTCR ((AT91_REG *) 	0xFFFE4120) // (PDC_SPI1) PDC Transfer Control Register
+#define AT91C_SPI1_RPR  ((AT91_REG *) 	0xFFFE4100) // (PDC_SPI1) Receive Pointer Register
+#define AT91C_SPI1_TNCR ((AT91_REG *) 	0xFFFE411C) // (PDC_SPI1) Transmit Next Counter Register
+#define AT91C_SPI1_TPR  ((AT91_REG *) 	0xFFFE4108) // (PDC_SPI1) Transmit Pointer Register
+#define AT91C_SPI1_TNPR ((AT91_REG *) 	0xFFFE4118) // (PDC_SPI1) Transmit Next Pointer Register
+#define AT91C_SPI1_TCR  ((AT91_REG *) 	0xFFFE410C) // (PDC_SPI1) Transmit Counter Register
+#define AT91C_SPI1_RCR  ((AT91_REG *) 	0xFFFE4104) // (PDC_SPI1) Receive Counter Register
+#define AT91C_SPI1_RNPR ((AT91_REG *) 	0xFFFE4110) // (PDC_SPI1) Receive Next Pointer Register
+#define AT91C_SPI1_RNCR ((AT91_REG *) 	0xFFFE4114) // (PDC_SPI1) Receive Next Counter Register
+#define AT91C_SPI1_PTSR ((AT91_REG *) 	0xFFFE4124) // (PDC_SPI1) PDC Transfer Status Register
+// ========== Register definition for SPI1 peripheral ==========
+#define AT91C_SPI1_IMR  ((AT91_REG *) 	0xFFFE401C) // (SPI1) Interrupt Mask Register
+#define AT91C_SPI1_IER  ((AT91_REG *) 	0xFFFE4014) // (SPI1) Interrupt Enable Register
+#define AT91C_SPI1_MR   ((AT91_REG *) 	0xFFFE4004) // (SPI1) Mode Register
+#define AT91C_SPI1_RDR  ((AT91_REG *) 	0xFFFE4008) // (SPI1) Receive Data Register
+#define AT91C_SPI1_IDR  ((AT91_REG *) 	0xFFFE4018) // (SPI1) Interrupt Disable Register
+#define AT91C_SPI1_SR   ((AT91_REG *) 	0xFFFE4010) // (SPI1) Status Register
+#define AT91C_SPI1_TDR  ((AT91_REG *) 	0xFFFE400C) // (SPI1) Transmit Data Register
+#define AT91C_SPI1_CR   ((AT91_REG *) 	0xFFFE4000) // (SPI1) Control Register
+#define AT91C_SPI1_CSR  ((AT91_REG *) 	0xFFFE4030) // (SPI1) Chip Select Register
+// ========== Register definition for PDC_SPI0 peripheral ==========
+#define AT91C_SPI0_PTCR ((AT91_REG *) 	0xFFFE0120) // (PDC_SPI0) PDC Transfer Control Register
+#define AT91C_SPI0_TPR  ((AT91_REG *) 	0xFFFE0108) // (PDC_SPI0) Transmit Pointer Register
+#define AT91C_SPI0_TCR  ((AT91_REG *) 	0xFFFE010C) // (PDC_SPI0) Transmit Counter Register
+#define AT91C_SPI0_RCR  ((AT91_REG *) 	0xFFFE0104) // (PDC_SPI0) Receive Counter Register
+#define AT91C_SPI0_PTSR ((AT91_REG *) 	0xFFFE0124) // (PDC_SPI0) PDC Transfer Status Register
+#define AT91C_SPI0_RNPR ((AT91_REG *) 	0xFFFE0110) // (PDC_SPI0) Receive Next Pointer Register
+#define AT91C_SPI0_RPR  ((AT91_REG *) 	0xFFFE0100) // (PDC_SPI0) Receive Pointer Register
+#define AT91C_SPI0_TNCR ((AT91_REG *) 	0xFFFE011C) // (PDC_SPI0) Transmit Next Counter Register
+#define AT91C_SPI0_RNCR ((AT91_REG *) 	0xFFFE0114) // (PDC_SPI0) Receive Next Counter Register
+#define AT91C_SPI0_TNPR ((AT91_REG *) 	0xFFFE0118) // (PDC_SPI0) Transmit Next Pointer Register
+// ========== Register definition for SPI0 peripheral ==========
+#define AT91C_SPI0_IER  ((AT91_REG *) 	0xFFFE0014) // (SPI0) Interrupt Enable Register
+#define AT91C_SPI0_SR   ((AT91_REG *) 	0xFFFE0010) // (SPI0) Status Register
+#define AT91C_SPI0_IDR  ((AT91_REG *) 	0xFFFE0018) // (SPI0) Interrupt Disable Register
+#define AT91C_SPI0_CR   ((AT91_REG *) 	0xFFFE0000) // (SPI0) Control Register
+#define AT91C_SPI0_MR   ((AT91_REG *) 	0xFFFE0004) // (SPI0) Mode Register
+#define AT91C_SPI0_IMR  ((AT91_REG *) 	0xFFFE001C) // (SPI0) Interrupt Mask Register
+#define AT91C_SPI0_TDR  ((AT91_REG *) 	0xFFFE000C) // (SPI0) Transmit Data Register
+#define AT91C_SPI0_RDR  ((AT91_REG *) 	0xFFFE0008) // (SPI0) Receive Data Register
+#define AT91C_SPI0_CSR  ((AT91_REG *) 	0xFFFE0030) // (SPI0) Chip Select Register
+// ========== Register definition for PDC_US1 peripheral ==========
+#define AT91C_US1_RNCR  ((AT91_REG *) 	0xFFFC4114) // (PDC_US1) Receive Next Counter Register
+#define AT91C_US1_PTCR  ((AT91_REG *) 	0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
+#define AT91C_US1_TCR   ((AT91_REG *) 	0xFFFC410C) // (PDC_US1) Transmit Counter Register
+#define AT91C_US1_PTSR  ((AT91_REG *) 	0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
+#define AT91C_US1_TNPR  ((AT91_REG *) 	0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
+#define AT91C_US1_RCR   ((AT91_REG *) 	0xFFFC4104) // (PDC_US1) Receive Counter Register
+#define AT91C_US1_RNPR  ((AT91_REG *) 	0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
+#define AT91C_US1_RPR   ((AT91_REG *) 	0xFFFC4100) // (PDC_US1) Receive Pointer Register
+#define AT91C_US1_TNCR  ((AT91_REG *) 	0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
+#define AT91C_US1_TPR   ((AT91_REG *) 	0xFFFC4108) // (PDC_US1) Transmit Pointer Register
+// ========== Register definition for US1 peripheral ==========
+#define AT91C_US1_IF    ((AT91_REG *) 	0xFFFC404C) // (US1) IRDA_FILTER Register
+#define AT91C_US1_NER   ((AT91_REG *) 	0xFFFC4044) // (US1) Nb Errors Register
+#define AT91C_US1_RTOR  ((AT91_REG *) 	0xFFFC4024) // (US1) Receiver Time-out Register
+#define AT91C_US1_CSR   ((AT91_REG *) 	0xFFFC4014) // (US1) Channel Status Register
+#define AT91C_US1_IDR   ((AT91_REG *) 	0xFFFC400C) // (US1) Interrupt Disable Register
+#define AT91C_US1_IER   ((AT91_REG *) 	0xFFFC4008) // (US1) Interrupt Enable Register
+#define AT91C_US1_THR   ((AT91_REG *) 	0xFFFC401C) // (US1) Transmitter Holding Register
+#define AT91C_US1_TTGR  ((AT91_REG *) 	0xFFFC4028) // (US1) Transmitter Time-guard Register
+#define AT91C_US1_RHR   ((AT91_REG *) 	0xFFFC4018) // (US1) Receiver Holding Register
+#define AT91C_US1_BRGR  ((AT91_REG *) 	0xFFFC4020) // (US1) Baud Rate Generator Register
+#define AT91C_US1_IMR   ((AT91_REG *) 	0xFFFC4010) // (US1) Interrupt Mask Register
+#define AT91C_US1_FIDI  ((AT91_REG *) 	0xFFFC4040) // (US1) FI_DI_Ratio Register
+#define AT91C_US1_CR    ((AT91_REG *) 	0xFFFC4000) // (US1) Control Register
+#define AT91C_US1_MR    ((AT91_REG *) 	0xFFFC4004) // (US1) Mode Register
+// ========== Register definition for PDC_US0 peripheral ==========
+#define AT91C_US0_TNPR  ((AT91_REG *) 	0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
+#define AT91C_US0_RNPR  ((AT91_REG *) 	0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
+#define AT91C_US0_TCR   ((AT91_REG *) 	0xFFFC010C) // (PDC_US0) Transmit Counter Register
+#define AT91C_US0_PTCR  ((AT91_REG *) 	0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
+#define AT91C_US0_PTSR  ((AT91_REG *) 	0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
+#define AT91C_US0_TNCR  ((AT91_REG *) 	0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
+#define AT91C_US0_TPR   ((AT91_REG *) 	0xFFFC0108) // (PDC_US0) Transmit Pointer Register
+#define AT91C_US0_RCR   ((AT91_REG *) 	0xFFFC0104) // (PDC_US0) Receive Counter Register
+#define AT91C_US0_RPR   ((AT91_REG *) 	0xFFFC0100) // (PDC_US0) Receive Pointer Register
+#define AT91C_US0_RNCR  ((AT91_REG *) 	0xFFFC0114) // (PDC_US0) Receive Next Counter Register
+// ========== Register definition for US0 peripheral ==========
+#define AT91C_US0_BRGR  ((AT91_REG *) 	0xFFFC0020) // (US0) Baud Rate Generator Register
+#define AT91C_US0_NER   ((AT91_REG *) 	0xFFFC0044) // (US0) Nb Errors Register
+#define AT91C_US0_CR    ((AT91_REG *) 	0xFFFC0000) // (US0) Control Register
+#define AT91C_US0_IMR   ((AT91_REG *) 	0xFFFC0010) // (US0) Interrupt Mask Register
+#define AT91C_US0_FIDI  ((AT91_REG *) 	0xFFFC0040) // (US0) FI_DI_Ratio Register
+#define AT91C_US0_TTGR  ((AT91_REG *) 	0xFFFC0028) // (US0) Transmitter Time-guard Register
+#define AT91C_US0_MR    ((AT91_REG *) 	0xFFFC0004) // (US0) Mode Register
+#define AT91C_US0_RTOR  ((AT91_REG *) 	0xFFFC0024) // (US0) Receiver Time-out Register
+#define AT91C_US0_CSR   ((AT91_REG *) 	0xFFFC0014) // (US0) Channel Status Register
+#define AT91C_US0_RHR   ((AT91_REG *) 	0xFFFC0018) // (US0) Receiver Holding Register
+#define AT91C_US0_IDR   ((AT91_REG *) 	0xFFFC000C) // (US0) Interrupt Disable Register
+#define AT91C_US0_THR   ((AT91_REG *) 	0xFFFC001C) // (US0) Transmitter Holding Register
+#define AT91C_US0_IF    ((AT91_REG *) 	0xFFFC004C) // (US0) IRDA_FILTER Register
+#define AT91C_US0_IER   ((AT91_REG *) 	0xFFFC0008) // (US0) Interrupt Enable Register
+// ========== Register definition for PDC_SSC peripheral ==========
+#define AT91C_SSC_TNCR  ((AT91_REG *) 	0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register
+#define AT91C_SSC_RPR   ((AT91_REG *) 	0xFFFD4100) // (PDC_SSC) Receive Pointer Register
+#define AT91C_SSC_RNCR  ((AT91_REG *) 	0xFFFD4114) // (PDC_SSC) Receive Next Counter Register
+#define AT91C_SSC_TPR   ((AT91_REG *) 	0xFFFD4108) // (PDC_SSC) Transmit Pointer Register
+#define AT91C_SSC_PTCR  ((AT91_REG *) 	0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register
+#define AT91C_SSC_TCR   ((AT91_REG *) 	0xFFFD410C) // (PDC_SSC) Transmit Counter Register
+#define AT91C_SSC_RCR   ((AT91_REG *) 	0xFFFD4104) // (PDC_SSC) Receive Counter Register
+#define AT91C_SSC_RNPR  ((AT91_REG *) 	0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register
+#define AT91C_SSC_TNPR  ((AT91_REG *) 	0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register
+#define AT91C_SSC_PTSR  ((AT91_REG *) 	0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register
+// ========== Register definition for SSC peripheral ==========
+#define AT91C_SSC_RHR   ((AT91_REG *) 	0xFFFD4020) // (SSC) Receive Holding Register
+#define AT91C_SSC_RSHR  ((AT91_REG *) 	0xFFFD4030) // (SSC) Receive Sync Holding Register
+#define AT91C_SSC_TFMR  ((AT91_REG *) 	0xFFFD401C) // (SSC) Transmit Frame Mode Register
+#define AT91C_SSC_IDR   ((AT91_REG *) 	0xFFFD4048) // (SSC) Interrupt Disable Register
+#define AT91C_SSC_THR   ((AT91_REG *) 	0xFFFD4024) // (SSC) Transmit Holding Register
+#define AT91C_SSC_RCMR  ((AT91_REG *) 	0xFFFD4010) // (SSC) Receive Clock ModeRegister
+#define AT91C_SSC_IER   ((AT91_REG *) 	0xFFFD4044) // (SSC) Interrupt Enable Register
+#define AT91C_SSC_TSHR  ((AT91_REG *) 	0xFFFD4034) // (SSC) Transmit Sync Holding Register
+#define AT91C_SSC_SR    ((AT91_REG *) 	0xFFFD4040) // (SSC) Status Register
+#define AT91C_SSC_CMR   ((AT91_REG *) 	0xFFFD4004) // (SSC) Clock Mode Register
+#define AT91C_SSC_TCMR  ((AT91_REG *) 	0xFFFD4018) // (SSC) Transmit Clock Mode Register
+#define AT91C_SSC_CR    ((AT91_REG *) 	0xFFFD4000) // (SSC) Control Register
+#define AT91C_SSC_IMR   ((AT91_REG *) 	0xFFFD404C) // (SSC) Interrupt Mask Register
+#define AT91C_SSC_RFMR  ((AT91_REG *) 	0xFFFD4014) // (SSC) Receive Frame Mode Register
+// ========== Register definition for TWI peripheral ==========
+#define AT91C_TWI_IER   ((AT91_REG *) 	0xFFFB8024) // (TWI) Interrupt Enable Register
+#define AT91C_TWI_CR    ((AT91_REG *) 	0xFFFB8000) // (TWI) Control Register
+#define AT91C_TWI_SR    ((AT91_REG *) 	0xFFFB8020) // (TWI) Status Register
+#define AT91C_TWI_IMR   ((AT91_REG *) 	0xFFFB802C) // (TWI) Interrupt Mask Register
+#define AT91C_TWI_THR   ((AT91_REG *) 	0xFFFB8034) // (TWI) Transmit Holding Register
+#define AT91C_TWI_IDR   ((AT91_REG *) 	0xFFFB8028) // (TWI) Interrupt Disable Register
+#define AT91C_TWI_IADR  ((AT91_REG *) 	0xFFFB800C) // (TWI) Internal Address Register
+#define AT91C_TWI_MMR   ((AT91_REG *) 	0xFFFB8004) // (TWI) Master Mode Register
+#define AT91C_TWI_CWGR  ((AT91_REG *) 	0xFFFB8010) // (TWI) Clock Waveform Generator Register
+#define AT91C_TWI_RHR   ((AT91_REG *) 	0xFFFB8030) // (TWI) Receive Holding Register
+// ========== Register definition for PWMC_CH3 peripheral ==========
+#define AT91C_PWMC_CH3_CUPDR ((AT91_REG *) 	0xFFFCC270) // (PWMC_CH3) Channel Update Register
+#define AT91C_PWMC_CH3_Reserved ((AT91_REG *) 	0xFFFCC274) // (PWMC_CH3) Reserved
+#define AT91C_PWMC_CH3_CPRDR ((AT91_REG *) 	0xFFFCC268) // (PWMC_CH3) Channel Period Register
+#define AT91C_PWMC_CH3_CDTYR ((AT91_REG *) 	0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register
+#define AT91C_PWMC_CH3_CCNTR ((AT91_REG *) 	0xFFFCC26C) // (PWMC_CH3) Channel Counter Register
+#define AT91C_PWMC_CH3_CMR ((AT91_REG *) 	0xFFFCC260) // (PWMC_CH3) Channel Mode Register
+// ========== Register definition for PWMC_CH2 peripheral ==========
+#define AT91C_PWMC_CH2_Reserved ((AT91_REG *) 	0xFFFCC254) // (PWMC_CH2) Reserved
+#define AT91C_PWMC_CH2_CMR ((AT91_REG *) 	0xFFFCC240) // (PWMC_CH2) Channel Mode Register
+#define AT91C_PWMC_CH2_CCNTR ((AT91_REG *) 	0xFFFCC24C) // (PWMC_CH2) Channel Counter Register
+#define AT91C_PWMC_CH2_CPRDR ((AT91_REG *) 	0xFFFCC248) // (PWMC_CH2) Channel Period Register
+#define AT91C_PWMC_CH2_CUPDR ((AT91_REG *) 	0xFFFCC250) // (PWMC_CH2) Channel Update Register
+#define AT91C_PWMC_CH2_CDTYR ((AT91_REG *) 	0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register
+// ========== Register definition for PWMC_CH1 peripheral ==========
+#define AT91C_PWMC_CH1_Reserved ((AT91_REG *) 	0xFFFCC234) // (PWMC_CH1) Reserved
+#define AT91C_PWMC_CH1_CUPDR ((AT91_REG *) 	0xFFFCC230) // (PWMC_CH1) Channel Update Register
+#define AT91C_PWMC_CH1_CPRDR ((AT91_REG *) 	0xFFFCC228) // (PWMC_CH1) Channel Period Register
+#define AT91C_PWMC_CH1_CCNTR ((AT91_REG *) 	0xFFFCC22C) // (PWMC_CH1) Channel Counter Register
+#define AT91C_PWMC_CH1_CDTYR ((AT91_REG *) 	0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register
+#define AT91C_PWMC_CH1_CMR ((AT91_REG *) 	0xFFFCC220) // (PWMC_CH1) Channel Mode Register
+// ========== Register definition for PWMC_CH0 peripheral ==========
+#define AT91C_PWMC_CH0_Reserved ((AT91_REG *) 	0xFFFCC214) // (PWMC_CH0) Reserved
+#define AT91C_PWMC_CH0_CPRDR ((AT91_REG *) 	0xFFFCC208) // (PWMC_CH0) Channel Period Register
+#define AT91C_PWMC_CH0_CDTYR ((AT91_REG *) 	0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register
+#define AT91C_PWMC_CH0_CMR ((AT91_REG *) 	0xFFFCC200) // (PWMC_CH0) Channel Mode Register
+#define AT91C_PWMC_CH0_CUPDR ((AT91_REG *) 	0xFFFCC210) // (PWMC_CH0) Channel Update Register
+#define AT91C_PWMC_CH0_CCNTR ((AT91_REG *) 	0xFFFCC20C) // (PWMC_CH0) Channel Counter Register
+// ========== Register definition for PWMC peripheral ==========
+#define AT91C_PWMC_IDR  ((AT91_REG *) 	0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register
+#define AT91C_PWMC_DIS  ((AT91_REG *) 	0xFFFCC008) // (PWMC) PWMC Disable Register
+#define AT91C_PWMC_IER  ((AT91_REG *) 	0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register
+#define AT91C_PWMC_VR   ((AT91_REG *) 	0xFFFCC0FC) // (PWMC) PWMC Version Register
+#define AT91C_PWMC_ISR  ((AT91_REG *) 	0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register
+#define AT91C_PWMC_SR   ((AT91_REG *) 	0xFFFCC00C) // (PWMC) PWMC Status Register
+#define AT91C_PWMC_IMR  ((AT91_REG *) 	0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register
+#define AT91C_PWMC_MR   ((AT91_REG *) 	0xFFFCC000) // (PWMC) PWMC Mode Register
+#define AT91C_PWMC_ENA  ((AT91_REG *) 	0xFFFCC004) // (PWMC) PWMC Enable Register
+// ========== Register definition for UDP peripheral ==========
+#define AT91C_UDP_IMR   ((AT91_REG *) 	0xFFFB0018) // (UDP) Interrupt Mask Register
+#define AT91C_UDP_FADDR ((AT91_REG *) 	0xFFFB0008) // (UDP) Function Address Register
+#define AT91C_UDP_NUM   ((AT91_REG *) 	0xFFFB0000) // (UDP) Frame Number Register
+#define AT91C_UDP_FDR   ((AT91_REG *) 	0xFFFB0050) // (UDP) Endpoint FIFO Data Register
+#define AT91C_UDP_ISR   ((AT91_REG *) 	0xFFFB001C) // (UDP) Interrupt Status Register
+#define AT91C_UDP_CSR   ((AT91_REG *) 	0xFFFB0030) // (UDP) Endpoint Control and Status Register
+#define AT91C_UDP_IDR   ((AT91_REG *) 	0xFFFB0014) // (UDP) Interrupt Disable Register
+#define AT91C_UDP_ICR   ((AT91_REG *) 	0xFFFB0020) // (UDP) Interrupt Clear Register
+#define AT91C_UDP_RSTEP ((AT91_REG *) 	0xFFFB0028) // (UDP) Reset Endpoint Register
+#define AT91C_UDP_TXVC  ((AT91_REG *) 	0xFFFB0074) // (UDP) Transceiver Control Register
+#define AT91C_UDP_GLBSTATE ((AT91_REG *) 	0xFFFB0004) // (UDP) Global State Register
+#define AT91C_UDP_IER   ((AT91_REG *) 	0xFFFB0010) // (UDP) Interrupt Enable Register
+// ========== Register definition for TC0 peripheral ==========
+#define AT91C_TC0_SR    ((AT91_REG *) 	0xFFFA0020) // (TC0) Status Register
+#define AT91C_TC0_RC    ((AT91_REG *) 	0xFFFA001C) // (TC0) Register C
+#define AT91C_TC0_RB    ((AT91_REG *) 	0xFFFA0018) // (TC0) Register B
+#define AT91C_TC0_CCR   ((AT91_REG *) 	0xFFFA0000) // (TC0) Channel Control Register
+#define AT91C_TC0_CMR   ((AT91_REG *) 	0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC0_IER   ((AT91_REG *) 	0xFFFA0024) // (TC0) Interrupt Enable Register
+#define AT91C_TC0_RA    ((AT91_REG *) 	0xFFFA0014) // (TC0) Register A
+#define AT91C_TC0_IDR   ((AT91_REG *) 	0xFFFA0028) // (TC0) Interrupt Disable Register
+#define AT91C_TC0_CV    ((AT91_REG *) 	0xFFFA0010) // (TC0) Counter Value
+#define AT91C_TC0_IMR   ((AT91_REG *) 	0xFFFA002C) // (TC0) Interrupt Mask Register
+// ========== Register definition for TC1 peripheral ==========
+#define AT91C_TC1_RB    ((AT91_REG *) 	0xFFFA0058) // (TC1) Register B
+#define AT91C_TC1_CCR   ((AT91_REG *) 	0xFFFA0040) // (TC1) Channel Control Register
+#define AT91C_TC1_IER   ((AT91_REG *) 	0xFFFA0064) // (TC1) Interrupt Enable Register
+#define AT91C_TC1_IDR   ((AT91_REG *) 	0xFFFA0068) // (TC1) Interrupt Disable Register
+#define AT91C_TC1_SR    ((AT91_REG *) 	0xFFFA0060) // (TC1) Status Register
+#define AT91C_TC1_CMR   ((AT91_REG *) 	0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC1_RA    ((AT91_REG *) 	0xFFFA0054) // (TC1) Register A
+#define AT91C_TC1_RC    ((AT91_REG *) 	0xFFFA005C) // (TC1) Register C
+#define AT91C_TC1_IMR   ((AT91_REG *) 	0xFFFA006C) // (TC1) Interrupt Mask Register
+#define AT91C_TC1_CV    ((AT91_REG *) 	0xFFFA0050) // (TC1) Counter Value
+// ========== Register definition for TC2 peripheral ==========
+#define AT91C_TC2_CMR   ((AT91_REG *) 	0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC2_CCR   ((AT91_REG *) 	0xFFFA0080) // (TC2) Channel Control Register
+#define AT91C_TC2_CV    ((AT91_REG *) 	0xFFFA0090) // (TC2) Counter Value
+#define AT91C_TC2_RA    ((AT91_REG *) 	0xFFFA0094) // (TC2) Register A
+#define AT91C_TC2_RB    ((AT91_REG *) 	0xFFFA0098) // (TC2) Register B
+#define AT91C_TC2_IDR   ((AT91_REG *) 	0xFFFA00A8) // (TC2) Interrupt Disable Register
+#define AT91C_TC2_IMR   ((AT91_REG *) 	0xFFFA00AC) // (TC2) Interrupt Mask Register
+#define AT91C_TC2_RC    ((AT91_REG *) 	0xFFFA009C) // (TC2) Register C
+#define AT91C_TC2_IER   ((AT91_REG *) 	0xFFFA00A4) // (TC2) Interrupt Enable Register
+#define AT91C_TC2_SR    ((AT91_REG *) 	0xFFFA00A0) // (TC2) Status Register
+// ========== Register definition for TCB peripheral ==========
+#define AT91C_TCB_BMR   ((AT91_REG *) 	0xFFFA00C4) // (TCB) TC Block Mode Register
+#define AT91C_TCB_BCR   ((AT91_REG *) 	0xFFFA00C0) // (TCB) TC Block Control Register
+// ========== Register definition for CAN_MB0 peripheral ==========
+#define AT91C_CAN_MB0_MDL ((AT91_REG *) 	0xFFFD0214) // (CAN_MB0) MailBox Data Low Register
+#define AT91C_CAN_MB0_MAM ((AT91_REG *) 	0xFFFD0204) // (CAN_MB0) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB0_MCR ((AT91_REG *) 	0xFFFD021C) // (CAN_MB0) MailBox Control Register
+#define AT91C_CAN_MB0_MID ((AT91_REG *) 	0xFFFD0208) // (CAN_MB0) MailBox ID Register
+#define AT91C_CAN_MB0_MSR ((AT91_REG *) 	0xFFFD0210) // (CAN_MB0) MailBox Status Register
+#define AT91C_CAN_MB0_MFID ((AT91_REG *) 	0xFFFD020C) // (CAN_MB0) MailBox Family ID Register
+#define AT91C_CAN_MB0_MDH ((AT91_REG *) 	0xFFFD0218) // (CAN_MB0) MailBox Data High Register
+#define AT91C_CAN_MB0_MMR ((AT91_REG *) 	0xFFFD0200) // (CAN_MB0) MailBox Mode Register
+// ========== Register definition for CAN_MB1 peripheral ==========
+#define AT91C_CAN_MB1_MDL ((AT91_REG *) 	0xFFFD0234) // (CAN_MB1) MailBox Data Low Register
+#define AT91C_CAN_MB1_MID ((AT91_REG *) 	0xFFFD0228) // (CAN_MB1) MailBox ID Register
+#define AT91C_CAN_MB1_MMR ((AT91_REG *) 	0xFFFD0220) // (CAN_MB1) MailBox Mode Register
+#define AT91C_CAN_MB1_MSR ((AT91_REG *) 	0xFFFD0230) // (CAN_MB1) MailBox Status Register
+#define AT91C_CAN_MB1_MAM ((AT91_REG *) 	0xFFFD0224) // (CAN_MB1) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB1_MDH ((AT91_REG *) 	0xFFFD0238) // (CAN_MB1) MailBox Data High Register
+#define AT91C_CAN_MB1_MCR ((AT91_REG *) 	0xFFFD023C) // (CAN_MB1) MailBox Control Register
+#define AT91C_CAN_MB1_MFID ((AT91_REG *) 	0xFFFD022C) // (CAN_MB1) MailBox Family ID Register
+// ========== Register definition for CAN_MB2 peripheral ==========
+#define AT91C_CAN_MB2_MCR ((AT91_REG *) 	0xFFFD025C) // (CAN_MB2) MailBox Control Register
+#define AT91C_CAN_MB2_MDH ((AT91_REG *) 	0xFFFD0258) // (CAN_MB2) MailBox Data High Register
+#define AT91C_CAN_MB2_MID ((AT91_REG *) 	0xFFFD0248) // (CAN_MB2) MailBox ID Register
+#define AT91C_CAN_MB2_MDL ((AT91_REG *) 	0xFFFD0254) // (CAN_MB2) MailBox Data Low Register
+#define AT91C_CAN_MB2_MMR ((AT91_REG *) 	0xFFFD0240) // (CAN_MB2) MailBox Mode Register
+#define AT91C_CAN_MB2_MAM ((AT91_REG *) 	0xFFFD0244) // (CAN_MB2) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB2_MFID ((AT91_REG *) 	0xFFFD024C) // (CAN_MB2) MailBox Family ID Register
+#define AT91C_CAN_MB2_MSR ((AT91_REG *) 	0xFFFD0250) // (CAN_MB2) MailBox Status Register
+// ========== Register definition for CAN_MB3 peripheral ==========
+#define AT91C_CAN_MB3_MFID ((AT91_REG *) 	0xFFFD026C) // (CAN_MB3) MailBox Family ID Register
+#define AT91C_CAN_MB3_MAM ((AT91_REG *) 	0xFFFD0264) // (CAN_MB3) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB3_MID ((AT91_REG *) 	0xFFFD0268) // (CAN_MB3) MailBox ID Register
+#define AT91C_CAN_MB3_MCR ((AT91_REG *) 	0xFFFD027C) // (CAN_MB3) MailBox Control Register
+#define AT91C_CAN_MB3_MMR ((AT91_REG *) 	0xFFFD0260) // (CAN_MB3) MailBox Mode Register
+#define AT91C_CAN_MB3_MSR ((AT91_REG *) 	0xFFFD0270) // (CAN_MB3) MailBox Status Register
+#define AT91C_CAN_MB3_MDL ((AT91_REG *) 	0xFFFD0274) // (CAN_MB3) MailBox Data Low Register
+#define AT91C_CAN_MB3_MDH ((AT91_REG *) 	0xFFFD0278) // (CAN_MB3) MailBox Data High Register
+// ========== Register definition for CAN_MB4 peripheral ==========
+#define AT91C_CAN_MB4_MID ((AT91_REG *) 	0xFFFD0288) // (CAN_MB4) MailBox ID Register
+#define AT91C_CAN_MB4_MMR ((AT91_REG *) 	0xFFFD0280) // (CAN_MB4) MailBox Mode Register
+#define AT91C_CAN_MB4_MDH ((AT91_REG *) 	0xFFFD0298) // (CAN_MB4) MailBox Data High Register
+#define AT91C_CAN_MB4_MFID ((AT91_REG *) 	0xFFFD028C) // (CAN_MB4) MailBox Family ID Register
+#define AT91C_CAN_MB4_MSR ((AT91_REG *) 	0xFFFD0290) // (CAN_MB4) MailBox Status Register
+#define AT91C_CAN_MB4_MCR ((AT91_REG *) 	0xFFFD029C) // (CAN_MB4) MailBox Control Register
+#define AT91C_CAN_MB4_MDL ((AT91_REG *) 	0xFFFD0294) // (CAN_MB4) MailBox Data Low Register
+#define AT91C_CAN_MB4_MAM ((AT91_REG *) 	0xFFFD0284) // (CAN_MB4) MailBox Acceptance Mask Register
+// ========== Register definition for CAN_MB5 peripheral ==========
+#define AT91C_CAN_MB5_MSR ((AT91_REG *) 	0xFFFD02B0) // (CAN_MB5) MailBox Status Register
+#define AT91C_CAN_MB5_MCR ((AT91_REG *) 	0xFFFD02BC) // (CAN_MB5) MailBox Control Register
+#define AT91C_CAN_MB5_MFID ((AT91_REG *) 	0xFFFD02AC) // (CAN_MB5) MailBox Family ID Register
+#define AT91C_CAN_MB5_MDH ((AT91_REG *) 	0xFFFD02B8) // (CAN_MB5) MailBox Data High Register
+#define AT91C_CAN_MB5_MID ((AT91_REG *) 	0xFFFD02A8) // (CAN_MB5) MailBox ID Register
+#define AT91C_CAN_MB5_MMR ((AT91_REG *) 	0xFFFD02A0) // (CAN_MB5) MailBox Mode Register
+#define AT91C_CAN_MB5_MDL ((AT91_REG *) 	0xFFFD02B4) // (CAN_MB5) MailBox Data Low Register
+#define AT91C_CAN_MB5_MAM ((AT91_REG *) 	0xFFFD02A4) // (CAN_MB5) MailBox Acceptance Mask Register
+// ========== Register definition for CAN_MB6 peripheral ==========
+#define AT91C_CAN_MB6_MFID ((AT91_REG *) 	0xFFFD02CC) // (CAN_MB6) MailBox Family ID Register
+#define AT91C_CAN_MB6_MID ((AT91_REG *) 	0xFFFD02C8) // (CAN_MB6) MailBox ID Register
+#define AT91C_CAN_MB6_MAM ((AT91_REG *) 	0xFFFD02C4) // (CAN_MB6) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB6_MSR ((AT91_REG *) 	0xFFFD02D0) // (CAN_MB6) MailBox Status Register
+#define AT91C_CAN_MB6_MDL ((AT91_REG *) 	0xFFFD02D4) // (CAN_MB6) MailBox Data Low Register
+#define AT91C_CAN_MB6_MCR ((AT91_REG *) 	0xFFFD02DC) // (CAN_MB6) MailBox Control Register
+#define AT91C_CAN_MB6_MDH ((AT91_REG *) 	0xFFFD02D8) // (CAN_MB6) MailBox Data High Register
+#define AT91C_CAN_MB6_MMR ((AT91_REG *) 	0xFFFD02C0) // (CAN_MB6) MailBox Mode Register
+// ========== Register definition for CAN_MB7 peripheral ==========
+#define AT91C_CAN_MB7_MCR ((AT91_REG *) 	0xFFFD02FC) // (CAN_MB7) MailBox Control Register
+#define AT91C_CAN_MB7_MDH ((AT91_REG *) 	0xFFFD02F8) // (CAN_MB7) MailBox Data High Register
+#define AT91C_CAN_MB7_MFID ((AT91_REG *) 	0xFFFD02EC) // (CAN_MB7) MailBox Family ID Register
+#define AT91C_CAN_MB7_MDL ((AT91_REG *) 	0xFFFD02F4) // (CAN_MB7) MailBox Data Low Register
+#define AT91C_CAN_MB7_MID ((AT91_REG *) 	0xFFFD02E8) // (CAN_MB7) MailBox ID Register
+#define AT91C_CAN_MB7_MMR ((AT91_REG *) 	0xFFFD02E0) // (CAN_MB7) MailBox Mode Register
+#define AT91C_CAN_MB7_MAM ((AT91_REG *) 	0xFFFD02E4) // (CAN_MB7) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB7_MSR ((AT91_REG *) 	0xFFFD02F0) // (CAN_MB7) MailBox Status Register
+// ========== Register definition for CAN peripheral ==========
+#define AT91C_CAN_TCR   ((AT91_REG *) 	0xFFFD0024) // (CAN) Transfer Command Register
+#define AT91C_CAN_IMR   ((AT91_REG *) 	0xFFFD000C) // (CAN) Interrupt Mask Register
+#define AT91C_CAN_IER   ((AT91_REG *) 	0xFFFD0004) // (CAN) Interrupt Enable Register
+#define AT91C_CAN_ECR   ((AT91_REG *) 	0xFFFD0020) // (CAN) Error Counter Register
+#define AT91C_CAN_TIMESTP ((AT91_REG *) 	0xFFFD001C) // (CAN) Time Stamp Register
+#define AT91C_CAN_MR    ((AT91_REG *) 	0xFFFD0000) // (CAN) Mode Register
+#define AT91C_CAN_IDR   ((AT91_REG *) 	0xFFFD0008) // (CAN) Interrupt Disable Register
+#define AT91C_CAN_ACR   ((AT91_REG *) 	0xFFFD0028) // (CAN) Abort Command Register
+#define AT91C_CAN_TIM   ((AT91_REG *) 	0xFFFD0018) // (CAN) Timer Register
+#define AT91C_CAN_SR    ((AT91_REG *) 	0xFFFD0010) // (CAN) Status Register
+#define AT91C_CAN_BR    ((AT91_REG *) 	0xFFFD0014) // (CAN) Baudrate Register
+#define AT91C_CAN_VR    ((AT91_REG *) 	0xFFFD00FC) // (CAN) Version Register
+// ========== Register definition for EMAC peripheral ==========
+#define AT91C_EMAC_ISR  ((AT91_REG *) 	0xFFFDC024) // (EMAC) Interrupt Status Register
+#define AT91C_EMAC_SA4H ((AT91_REG *) 	0xFFFDC0B4) // (EMAC) Specific Address 4 Top, Last 2 bytes
+#define AT91C_EMAC_SA1L ((AT91_REG *) 	0xFFFDC098) // (EMAC) Specific Address 1 Bottom, First 4 bytes
+#define AT91C_EMAC_ELE  ((AT91_REG *) 	0xFFFDC078) // (EMAC) Excessive Length Errors Register
+#define AT91C_EMAC_LCOL ((AT91_REG *) 	0xFFFDC05C) // (EMAC) Late Collision Register
+#define AT91C_EMAC_RLE  ((AT91_REG *) 	0xFFFDC088) // (EMAC) Receive Length Field Mismatch Register
+#define AT91C_EMAC_WOL  ((AT91_REG *) 	0xFFFDC0C4) // (EMAC) Wake On LAN Register
+#define AT91C_EMAC_DTF  ((AT91_REG *) 	0xFFFDC058) // (EMAC) Deferred Transmission Frame Register
+#define AT91C_EMAC_TUND ((AT91_REG *) 	0xFFFDC064) // (EMAC) Transmit Underrun Error Register
+#define AT91C_EMAC_NCR  ((AT91_REG *) 	0xFFFDC000) // (EMAC) Network Control Register
+#define AT91C_EMAC_SA4L ((AT91_REG *) 	0xFFFDC0B0) // (EMAC) Specific Address 4 Bottom, First 4 bytes
+#define AT91C_EMAC_RSR  ((AT91_REG *) 	0xFFFDC020) // (EMAC) Receive Status Register
+#define AT91C_EMAC_SA3L ((AT91_REG *) 	0xFFFDC0A8) // (EMAC) Specific Address 3 Bottom, First 4 bytes
+#define AT91C_EMAC_TSR  ((AT91_REG *) 	0xFFFDC014) // (EMAC) Transmit Status Register
+#define AT91C_EMAC_IDR  ((AT91_REG *) 	0xFFFDC02C) // (EMAC) Interrupt Disable Register
+#define AT91C_EMAC_RSE  ((AT91_REG *) 	0xFFFDC074) // (EMAC) Receive Symbol Errors Register
+#define AT91C_EMAC_ECOL ((AT91_REG *) 	0xFFFDC060) // (EMAC) Excessive Collision Register
+#define AT91C_EMAC_TID  ((AT91_REG *) 	0xFFFDC0B8) // (EMAC) Type ID Checking Register
+#define AT91C_EMAC_HRB  ((AT91_REG *) 	0xFFFDC090) // (EMAC) Hash Address Bottom[31:0]
+#define AT91C_EMAC_TBQP ((AT91_REG *) 	0xFFFDC01C) // (EMAC) Transmit Buffer Queue Pointer
+#define AT91C_EMAC_USRIO ((AT91_REG *) 	0xFFFDC0C0) // (EMAC) USER Input/Output Register
+#define AT91C_EMAC_PTR  ((AT91_REG *) 	0xFFFDC038) // (EMAC) Pause Time Register
+#define AT91C_EMAC_SA2H ((AT91_REG *) 	0xFFFDC0A4) // (EMAC) Specific Address 2 Top, Last 2 bytes
+#define AT91C_EMAC_ROV  ((AT91_REG *) 	0xFFFDC070) // (EMAC) Receive Overrun Errors Register
+#define AT91C_EMAC_ALE  ((AT91_REG *) 	0xFFFDC054) // (EMAC) Alignment Error Register
+#define AT91C_EMAC_RJA  ((AT91_REG *) 	0xFFFDC07C) // (EMAC) Receive Jabbers Register
+#define AT91C_EMAC_RBQP ((AT91_REG *) 	0xFFFDC018) // (EMAC) Receive Buffer Queue Pointer
+#define AT91C_EMAC_TPF  ((AT91_REG *) 	0xFFFDC08C) // (EMAC) Transmitted Pause Frames Register
+#define AT91C_EMAC_NCFGR ((AT91_REG *) 	0xFFFDC004) // (EMAC) Network Configuration Register
+#define AT91C_EMAC_HRT  ((AT91_REG *) 	0xFFFDC094) // (EMAC) Hash Address Top[63:32]
+#define AT91C_EMAC_USF  ((AT91_REG *) 	0xFFFDC080) // (EMAC) Undersize Frames Register
+#define AT91C_EMAC_FCSE ((AT91_REG *) 	0xFFFDC050) // (EMAC) Frame Check Sequence Error Register
+#define AT91C_EMAC_TPQ  ((AT91_REG *) 	0xFFFDC0BC) // (EMAC) Transmit Pause Quantum Register
+#define AT91C_EMAC_MAN  ((AT91_REG *) 	0xFFFDC034) // (EMAC) PHY Maintenance Register
+#define AT91C_EMAC_FTO  ((AT91_REG *) 	0xFFFDC040) // (EMAC) Frames Transmitted OK Register
+#define AT91C_EMAC_REV  ((AT91_REG *) 	0xFFFDC0FC) // (EMAC) Revision Register
+#define AT91C_EMAC_IMR  ((AT91_REG *) 	0xFFFDC030) // (EMAC) Interrupt Mask Register
+#define AT91C_EMAC_SCF  ((AT91_REG *) 	0xFFFDC044) // (EMAC) Single Collision Frame Register
+#define AT91C_EMAC_PFR  ((AT91_REG *) 	0xFFFDC03C) // (EMAC) Pause Frames received Register
+#define AT91C_EMAC_MCF  ((AT91_REG *) 	0xFFFDC048) // (EMAC) Multiple Collision Frame Register
+#define AT91C_EMAC_NSR  ((AT91_REG *) 	0xFFFDC008) // (EMAC) Network Status Register
+#define AT91C_EMAC_SA2L ((AT91_REG *) 	0xFFFDC0A0) // (EMAC) Specific Address 2 Bottom, First 4 bytes
+#define AT91C_EMAC_FRO  ((AT91_REG *) 	0xFFFDC04C) // (EMAC) Frames Received OK Register
+#define AT91C_EMAC_IER  ((AT91_REG *) 	0xFFFDC028) // (EMAC) Interrupt Enable Register
+#define AT91C_EMAC_SA1H ((AT91_REG *) 	0xFFFDC09C) // (EMAC) Specific Address 1 Top, Last 2 bytes
+#define AT91C_EMAC_CSE  ((AT91_REG *) 	0xFFFDC068) // (EMAC) Carrier Sense Error Register
+#define AT91C_EMAC_SA3H ((AT91_REG *) 	0xFFFDC0AC) // (EMAC) Specific Address 3 Top, Last 2 bytes
+#define AT91C_EMAC_RRE  ((AT91_REG *) 	0xFFFDC06C) // (EMAC) Receive Ressource Error Register
+#define AT91C_EMAC_STE  ((AT91_REG *) 	0xFFFDC084) // (EMAC) SQE Test Error Register
+// ========== Register definition for PDC_ADC peripheral ==========
+#define AT91C_ADC_PTSR  ((AT91_REG *) 	0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register
+#define AT91C_ADC_PTCR  ((AT91_REG *) 	0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register
+#define AT91C_ADC_TNPR  ((AT91_REG *) 	0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register
+#define AT91C_ADC_TNCR  ((AT91_REG *) 	0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register
+#define AT91C_ADC_RNPR  ((AT91_REG *) 	0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register
+#define AT91C_ADC_RNCR  ((AT91_REG *) 	0xFFFD8114) // (PDC_ADC) Receive Next Counter Register
+#define AT91C_ADC_RPR   ((AT91_REG *) 	0xFFFD8100) // (PDC_ADC) Receive Pointer Register
+#define AT91C_ADC_TCR   ((AT91_REG *) 	0xFFFD810C) // (PDC_ADC) Transmit Counter Register
+#define AT91C_ADC_TPR   ((AT91_REG *) 	0xFFFD8108) // (PDC_ADC) Transmit Pointer Register
+#define AT91C_ADC_RCR   ((AT91_REG *) 	0xFFFD8104) // (PDC_ADC) Receive Counter Register
+// ========== Register definition for ADC peripheral ==========
+#define AT91C_ADC_CDR2  ((AT91_REG *) 	0xFFFD8038) // (ADC) ADC Channel Data Register 2
+#define AT91C_ADC_CDR3  ((AT91_REG *) 	0xFFFD803C) // (ADC) ADC Channel Data Register 3
+#define AT91C_ADC_CDR0  ((AT91_REG *) 	0xFFFD8030) // (ADC) ADC Channel Data Register 0
+#define AT91C_ADC_CDR5  ((AT91_REG *) 	0xFFFD8044) // (ADC) ADC Channel Data Register 5
+#define AT91C_ADC_CHDR  ((AT91_REG *) 	0xFFFD8014) // (ADC) ADC Channel Disable Register
+#define AT91C_ADC_SR    ((AT91_REG *) 	0xFFFD801C) // (ADC) ADC Status Register
+#define AT91C_ADC_CDR4  ((AT91_REG *) 	0xFFFD8040) // (ADC) ADC Channel Data Register 4
+#define AT91C_ADC_CDR1  ((AT91_REG *) 	0xFFFD8034) // (ADC) ADC Channel Data Register 1
+#define AT91C_ADC_LCDR  ((AT91_REG *) 	0xFFFD8020) // (ADC) ADC Last Converted Data Register
+#define AT91C_ADC_IDR   ((AT91_REG *) 	0xFFFD8028) // (ADC) ADC Interrupt Disable Register
+#define AT91C_ADC_CR    ((AT91_REG *) 	0xFFFD8000) // (ADC) ADC Control Register
+#define AT91C_ADC_CDR7  ((AT91_REG *) 	0xFFFD804C) // (ADC) ADC Channel Data Register 7
+#define AT91C_ADC_CDR6  ((AT91_REG *) 	0xFFFD8048) // (ADC) ADC Channel Data Register 6
+#define AT91C_ADC_IER   ((AT91_REG *) 	0xFFFD8024) // (ADC) ADC Interrupt Enable Register
+#define AT91C_ADC_CHER  ((AT91_REG *) 	0xFFFD8010) // (ADC) ADC Channel Enable Register
+#define AT91C_ADC_CHSR  ((AT91_REG *) 	0xFFFD8018) // (ADC) ADC Channel Status Register
+#define AT91C_ADC_MR    ((AT91_REG *) 	0xFFFD8004) // (ADC) ADC Mode Register
+#define AT91C_ADC_IMR   ((AT91_REG *) 	0xFFFD802C) // (ADC) ADC Interrupt Mask Register
+// *****************************************************************************
+//               PIO DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_PIO_PA0        ((unsigned int) 1 <<  0) // Pin Controlled by PA0
+#define AT91C_PA0_RXD0     ((unsigned int) AT91C_PIO_PA0) //  USART 0 Receive Data
+#define AT91C_PIO_PA1        ((unsigned int) 1 <<  1) // Pin Controlled by PA1
+#define AT91C_PA1_TXD0     ((unsigned int) AT91C_PIO_PA1) //  USART 0 Transmit Data
+#define AT91C_PIO_PA10       ((unsigned int) 1 << 10) // Pin Controlled by PA10
+#define AT91C_PA10_TWD      ((unsigned int) AT91C_PIO_PA10) //  TWI Two-wire Serial Data
+#define AT91C_PIO_PA11       ((unsigned int) 1 << 11) // Pin Controlled by PA11
+#define AT91C_PA11_TWCK     ((unsigned int) AT91C_PIO_PA11) //  TWI Two-wire Serial Clock
+#define AT91C_PIO_PA12       ((unsigned int) 1 << 12) // Pin Controlled by PA12
+#define AT91C_PA12_SPI0_NPCS0 ((unsigned int) AT91C_PIO_PA12) //  SPI 0 Peripheral Chip Select 0
+#define AT91C_PIO_PA13       ((unsigned int) 1 << 13) // Pin Controlled by PA13
+#define AT91C_PA13_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PA13) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PA13_PCK1     ((unsigned int) AT91C_PIO_PA13) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA14       ((unsigned int) 1 << 14) // Pin Controlled by PA14
+#define AT91C_PA14_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PA14) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PA14_IRQ1     ((unsigned int) AT91C_PIO_PA14) //  External Interrupt 1
+#define AT91C_PIO_PA15       ((unsigned int) 1 << 15) // Pin Controlled by PA15
+#define AT91C_PA15_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PA15) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PA15_TCLK2    ((unsigned int) AT91C_PIO_PA15) //  Timer Counter 2 external clock input
+#define AT91C_PIO_PA16       ((unsigned int) 1 << 16) // Pin Controlled by PA16
+#define AT91C_PA16_SPI0_MISO ((unsigned int) AT91C_PIO_PA16) //  SPI 0 Master In Slave
+#define AT91C_PIO_PA17       ((unsigned int) 1 << 17) // Pin Controlled by PA17
+#define AT91C_PA17_SPI0_MOSI ((unsigned int) AT91C_PIO_PA17) //  SPI 0 Master Out Slave
+#define AT91C_PIO_PA18       ((unsigned int) 1 << 18) // Pin Controlled by PA18
+#define AT91C_PA18_SPI0_SPCK ((unsigned int) AT91C_PIO_PA18) //  SPI 0 Serial Clock
+#define AT91C_PIO_PA19       ((unsigned int) 1 << 19) // Pin Controlled by PA19
+#define AT91C_PA19_CANRX    ((unsigned int) AT91C_PIO_PA19) //  CAN Receive
+#define AT91C_PIO_PA2        ((unsigned int) 1 <<  2) // Pin Controlled by PA2
+#define AT91C_PA2_SCK0     ((unsigned int) AT91C_PIO_PA2) //  USART 0 Serial Clock
+#define AT91C_PA2_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PA2) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PA20       ((unsigned int) 1 << 20) // Pin Controlled by PA20
+#define AT91C_PA20_CANTX    ((unsigned int) AT91C_PIO_PA20) //  CAN Transmit
+#define AT91C_PIO_PA21       ((unsigned int) 1 << 21) // Pin Controlled by PA21
+#define AT91C_PA21_TF       ((unsigned int) AT91C_PIO_PA21) //  SSC Transmit Frame Sync
+#define AT91C_PA21_SPI1_NPCS0 ((unsigned int) AT91C_PIO_PA21) //  SPI 1 Peripheral Chip Select 0
+#define AT91C_PIO_PA22       ((unsigned int) 1 << 22) // Pin Controlled by PA22
+#define AT91C_PA22_TK       ((unsigned int) AT91C_PIO_PA22) //  SSC Transmit Clock
+#define AT91C_PA22_SPI1_SPCK ((unsigned int) AT91C_PIO_PA22) //  SPI 1 Serial Clock
+#define AT91C_PIO_PA23       ((unsigned int) 1 << 23) // Pin Controlled by PA23
+#define AT91C_PA23_TD       ((unsigned int) AT91C_PIO_PA23) //  SSC Transmit data
+#define AT91C_PA23_SPI1_MOSI ((unsigned int) AT91C_PIO_PA23) //  SPI 1 Master Out Slave
+#define AT91C_PIO_PA24       ((unsigned int) 1 << 24) // Pin Controlled by PA24
+#define AT91C_PA24_RD       ((unsigned int) AT91C_PIO_PA24) //  SSC Receive Data
+#define AT91C_PA24_SPI1_MISO ((unsigned int) AT91C_PIO_PA24) //  SPI 1 Master In Slave
+#define AT91C_PIO_PA25       ((unsigned int) 1 << 25) // Pin Controlled by PA25
+#define AT91C_PA25_RK       ((unsigned int) AT91C_PIO_PA25) //  SSC Receive Clock
+#define AT91C_PA25_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PA25) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PA26       ((unsigned int) 1 << 26) // Pin Controlled by PA26
+#define AT91C_PA26_RF       ((unsigned int) AT91C_PIO_PA26) //  SSC Receive Frame Sync
+#define AT91C_PA26_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PA26) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PA27       ((unsigned int) 1 << 27) // Pin Controlled by PA27
+#define AT91C_PA27_DRXD     ((unsigned int) AT91C_PIO_PA27) //  DBGU Debug Receive Data
+#define AT91C_PA27_PCK3     ((unsigned int) AT91C_PIO_PA27) //  PMC Programmable Clock Output 3
+#define AT91C_PIO_PA28       ((unsigned int) 1 << 28) // Pin Controlled by PA28
+#define AT91C_PA28_DTXD     ((unsigned int) AT91C_PIO_PA28) //  DBGU Debug Transmit Data
+#define AT91C_PIO_PA29       ((unsigned int) 1 << 29) // Pin Controlled by PA29
+#define AT91C_PA29_FIQ      ((unsigned int) AT91C_PIO_PA29) //  AIC Fast Interrupt Input
+#define AT91C_PA29_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PA29) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PA3        ((unsigned int) 1 <<  3) // Pin Controlled by PA3
+#define AT91C_PA3_RTS0     ((unsigned int) AT91C_PIO_PA3) //  USART 0 Ready To Send
+#define AT91C_PA3_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PA3) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PA30       ((unsigned int) 1 << 30) // Pin Controlled by PA30
+#define AT91C_PA30_IRQ0     ((unsigned int) AT91C_PIO_PA30) //  External Interrupt 0
+#define AT91C_PA30_PCK2     ((unsigned int) AT91C_PIO_PA30) //  PMC Programmable Clock Output 2
+#define AT91C_PIO_PA4        ((unsigned int) 1 <<  4) // Pin Controlled by PA4
+#define AT91C_PA4_CTS0     ((unsigned int) AT91C_PIO_PA4) //  USART 0 Clear To Send
+#define AT91C_PA4_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PA4) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PA5        ((unsigned int) 1 <<  5) // Pin Controlled by PA5
+#define AT91C_PA5_RXD1     ((unsigned int) AT91C_PIO_PA5) //  USART 1 Receive Data
+#define AT91C_PIO_PA6        ((unsigned int) 1 <<  6) // Pin Controlled by PA6
+#define AT91C_PA6_TXD1     ((unsigned int) AT91C_PIO_PA6) //  USART 1 Transmit Data
+#define AT91C_PIO_PA7        ((unsigned int) 1 <<  7) // Pin Controlled by PA7
+#define AT91C_PA7_SCK1     ((unsigned int) AT91C_PIO_PA7) //  USART 1 Serial Clock
+#define AT91C_PA7_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PA7) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PIO_PA8        ((unsigned int) 1 <<  8) // Pin Controlled by PA8
+#define AT91C_PA8_RTS1     ((unsigned int) AT91C_PIO_PA8) //  USART 1 Ready To Send
+#define AT91C_PA8_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PA8) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PIO_PA9        ((unsigned int) 1 <<  9) // Pin Controlled by PA9
+#define AT91C_PA9_CTS1     ((unsigned int) AT91C_PIO_PA9) //  USART 1 Clear To Send
+#define AT91C_PA9_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PA9) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PIO_PB0        ((unsigned int) 1 <<  0) // Pin Controlled by PB0
+#define AT91C_PB0_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PB0) //  Ethernet MAC Transmit Clock/Reference Clock
+#define AT91C_PB0_PCK0     ((unsigned int) AT91C_PIO_PB0) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB1        ((unsigned int) 1 <<  1) // Pin Controlled by PB1
+#define AT91C_PB1_ETXEN    ((unsigned int) AT91C_PIO_PB1) //  Ethernet MAC Transmit Enable
+#define AT91C_PIO_PB10       ((unsigned int) 1 << 10) // Pin Controlled by PB10
+#define AT91C_PB10_ETX2     ((unsigned int) AT91C_PIO_PB10) //  Ethernet MAC Transmit Data 2
+#define AT91C_PB10_SPI1_NPCS1 ((unsigned int) AT91C_PIO_PB10) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PB11       ((unsigned int) 1 << 11) // Pin Controlled by PB11
+#define AT91C_PB11_ETX3     ((unsigned int) AT91C_PIO_PB11) //  Ethernet MAC Transmit Data 3
+#define AT91C_PB11_SPI1_NPCS2 ((unsigned int) AT91C_PIO_PB11) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PB12       ((unsigned int) 1 << 12) // Pin Controlled by PB12
+#define AT91C_PB12_ETXER    ((unsigned int) AT91C_PIO_PB12) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PB12_TCLK0    ((unsigned int) AT91C_PIO_PB12) //  Timer Counter 0 external clock input
+#define AT91C_PIO_PB13       ((unsigned int) 1 << 13) // Pin Controlled by PB13
+#define AT91C_PB13_ERX2     ((unsigned int) AT91C_PIO_PB13) //  Ethernet MAC Receive Data 2
+#define AT91C_PB13_SPI0_NPCS1 ((unsigned int) AT91C_PIO_PB13) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PIO_PB14       ((unsigned int) 1 << 14) // Pin Controlled by PB14
+#define AT91C_PB14_ERX3     ((unsigned int) AT91C_PIO_PB14) //  Ethernet MAC Receive Data 3
+#define AT91C_PB14_SPI0_NPCS2 ((unsigned int) AT91C_PIO_PB14) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PIO_PB15       ((unsigned int) 1 << 15) // Pin Controlled by PB15
+#define AT91C_PB15_ERXDV_ECRSDV ((unsigned int) AT91C_PIO_PB15) //  Ethernet MAC Receive Data Valid
+#define AT91C_PIO_PB16       ((unsigned int) 1 << 16) // Pin Controlled by PB16
+#define AT91C_PB16_ECOL     ((unsigned int) AT91C_PIO_PB16) //  Ethernet MAC Collision Detected
+#define AT91C_PB16_SPI1_NPCS3 ((unsigned int) AT91C_PIO_PB16) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PB17       ((unsigned int) 1 << 17) // Pin Controlled by PB17
+#define AT91C_PB17_ERXCK    ((unsigned int) AT91C_PIO_PB17) //  Ethernet MAC Receive Clock
+#define AT91C_PB17_SPI0_NPCS3 ((unsigned int) AT91C_PIO_PB17) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PIO_PB18       ((unsigned int) 1 << 18) // Pin Controlled by PB18
+#define AT91C_PB18_EF100    ((unsigned int) AT91C_PIO_PB18) //  Ethernet MAC Force 100 Mbits/sec
+#define AT91C_PB18_ADTRG    ((unsigned int) AT91C_PIO_PB18) //  ADC External Trigger
+#define AT91C_PIO_PB19       ((unsigned int) 1 << 19) // Pin Controlled by PB19
+#define AT91C_PB19_PWM0     ((unsigned int) AT91C_PIO_PB19) //  PWM Channel 0
+#define AT91C_PB19_TCLK1    ((unsigned int) AT91C_PIO_PB19) //  Timer Counter 1 external clock input
+#define AT91C_PIO_PB2        ((unsigned int) 1 <<  2) // Pin Controlled by PB2
+#define AT91C_PB2_ETX0     ((unsigned int) AT91C_PIO_PB2) //  Ethernet MAC Transmit Data 0
+#define AT91C_PIO_PB20       ((unsigned int) 1 << 20) // Pin Controlled by PB20
+#define AT91C_PB20_PWM1     ((unsigned int) AT91C_PIO_PB20) //  PWM Channel 1
+#define AT91C_PB20_PCK0     ((unsigned int) AT91C_PIO_PB20) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB21       ((unsigned int) 1 << 21) // Pin Controlled by PB21
+#define AT91C_PB21_PWM2     ((unsigned int) AT91C_PIO_PB21) //  PWM Channel 2
+#define AT91C_PB21_PCK1     ((unsigned int) AT91C_PIO_PB21) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PB22       ((unsigned int) 1 << 22) // Pin Controlled by PB22
+#define AT91C_PB22_PWM3     ((unsigned int) AT91C_PIO_PB22) //  PWM Channel 3
+#define AT91C_PB22_PCK2     ((unsigned int) AT91C_PIO_PB22) //  PMC Programmable Clock Output 2
+#define AT91C_PIO_PB23       ((unsigned int) 1 << 23) // Pin Controlled by PB23
+#define AT91C_PB23_TIOA0    ((unsigned int) AT91C_PIO_PB23) //  Timer Counter 0 Multipurpose Timer I/O Pin A
+#define AT91C_PB23_DCD1     ((unsigned int) AT91C_PIO_PB23) //  USART 1 Data Carrier Detect
+#define AT91C_PIO_PB24       ((unsigned int) 1 << 24) // Pin Controlled by PB24
+#define AT91C_PB24_TIOB0    ((unsigned int) AT91C_PIO_PB24) //  Timer Counter 0 Multipurpose Timer I/O Pin B
+#define AT91C_PB24_DSR1     ((unsigned int) AT91C_PIO_PB24) //  USART 1 Data Set ready
+#define AT91C_PIO_PB25       ((unsigned int) 1 << 25) // Pin Controlled by PB25
+#define AT91C_PB25_TIOA1    ((unsigned int) AT91C_PIO_PB25) //  Timer Counter 1 Multipurpose Timer I/O Pin A
+#define AT91C_PB25_DTR1     ((unsigned int) AT91C_PIO_PB25) //  USART 1 Data Terminal ready
+#define AT91C_PIO_PB26       ((unsigned int) 1 << 26) // Pin Controlled by PB26
+#define AT91C_PB26_TIOB1    ((unsigned int) AT91C_PIO_PB26) //  Timer Counter 1 Multipurpose Timer I/O Pin B
+#define AT91C_PB26_RI1      ((unsigned int) AT91C_PIO_PB26) //  USART 1 Ring Indicator
+#define AT91C_PIO_PB27       ((unsigned int) 1 << 27) // Pin Controlled by PB27
+#define AT91C_PB27_TIOA2    ((unsigned int) AT91C_PIO_PB27) //  Timer Counter 2 Multipurpose Timer I/O Pin A
+#define AT91C_PB27_PWM0     ((unsigned int) AT91C_PIO_PB27) //  PWM Channel 0
+#define AT91C_PIO_PB28       ((unsigned int) 1 << 28) // Pin Controlled by PB28
+#define AT91C_PB28_TIOB2    ((unsigned int) AT91C_PIO_PB28) //  Timer Counter 2 Multipurpose Timer I/O Pin B
+#define AT91C_PB28_PWM1     ((unsigned int) AT91C_PIO_PB28) //  PWM Channel 1
+#define AT91C_PIO_PB29       ((unsigned int) 1 << 29) // Pin Controlled by PB29
+#define AT91C_PB29_PCK1     ((unsigned int) AT91C_PIO_PB29) //  PMC Programmable Clock Output 1
+#define AT91C_PB29_PWM2     ((unsigned int) AT91C_PIO_PB29) //  PWM Channel 2
+#define AT91C_PIO_PB3        ((unsigned int) 1 <<  3) // Pin Controlled by PB3
+#define AT91C_PB3_ETX1     ((unsigned int) AT91C_PIO_PB3) //  Ethernet MAC Transmit Data 1
+#define AT91C_PIO_PB30       ((unsigned int) 1 << 30) // Pin Controlled by PB30
+#define AT91C_PB30_PCK2     ((unsigned int) AT91C_PIO_PB30) //  PMC Programmable Clock Output 2
+#define AT91C_PB30_PWM3     ((unsigned int) AT91C_PIO_PB30) //  PWM Channel 3
+#define AT91C_PIO_PB4        ((unsigned int) 1 <<  4) // Pin Controlled by PB4
+#define AT91C_PB4_ECRS     ((unsigned int) AT91C_PIO_PB4) //  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+#define AT91C_PIO_PB5        ((unsigned int) 1 <<  5) // Pin Controlled by PB5
+#define AT91C_PB5_ERX0     ((unsigned int) AT91C_PIO_PB5) //  Ethernet MAC Receive Data 0
+#define AT91C_PIO_PB6        ((unsigned int) 1 <<  6) // Pin Controlled by PB6
+#define AT91C_PB6_ERX1     ((unsigned int) AT91C_PIO_PB6) //  Ethernet MAC Receive Data 1
+#define AT91C_PIO_PB7        ((unsigned int) 1 <<  7) // Pin Controlled by PB7
+#define AT91C_PB7_ERXER    ((unsigned int) AT91C_PIO_PB7) //  Ethernet MAC Receive Error
+#define AT91C_PIO_PB8        ((unsigned int) 1 <<  8) // Pin Controlled by PB8
+#define AT91C_PB8_EMDC     ((unsigned int) AT91C_PIO_PB8) //  Ethernet MAC Management Data Clock
+#define AT91C_PIO_PB9        ((unsigned int) 1 <<  9) // Pin Controlled by PB9
+#define AT91C_PB9_EMDIO    ((unsigned int) AT91C_PIO_PB9) //  Ethernet MAC Management Data Input/Output
+// *****************************************************************************
+//               PERIPHERAL ID DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_ID_FIQ    ((unsigned int)  0) // Advanced Interrupt Controller (FIQ)
+#define AT91C_ID_SYS    ((unsigned int)  1) // System Peripheral
+#define AT91C_ID_PIOA   ((unsigned int)  2) // Parallel IO Controller A
+#define AT91C_ID_PIOB   ((unsigned int)  3) // Parallel IO Controller B
+#define AT91C_ID_SPI0   ((unsigned int)  4) // Serial Peripheral Interface 0
+#define AT91C_ID_SPI1   ((unsigned int)  5) // Serial Peripheral Interface 1
+#define AT91C_ID_US0    ((unsigned int)  6) // USART 0
+#define AT91C_ID_US1    ((unsigned int)  7) // USART 1
+#define AT91C_ID_SSC    ((unsigned int)  8) // Serial Synchronous Controller
+#define AT91C_ID_TWI    ((unsigned int)  9) // Two-Wire Interface
+#define AT91C_ID_PWMC   ((unsigned int) 10) // PWM Controller
+#define AT91C_ID_UDP    ((unsigned int) 11) // USB Device Port
+#define AT91C_ID_TC0    ((unsigned int) 12) // Timer Counter 0
+#define AT91C_ID_TC1    ((unsigned int) 13) // Timer Counter 1
+#define AT91C_ID_TC2    ((unsigned int) 14) // Timer Counter 2
+#define AT91C_ID_CAN    ((unsigned int) 15) // Control Area Network Controller
+#define AT91C_ID_EMAC   ((unsigned int) 16) // Ethernet MAC
+#define AT91C_ID_ADC    ((unsigned int) 17) // Analog-to-Digital Converter
+#define AT91C_ID_18_Reserved ((unsigned int) 18) // Reserved
+#define AT91C_ID_19_Reserved ((unsigned int) 19) // Reserved
+#define AT91C_ID_20_Reserved ((unsigned int) 20) // Reserved
+#define AT91C_ID_21_Reserved ((unsigned int) 21) // Reserved
+#define AT91C_ID_22_Reserved ((unsigned int) 22) // Reserved
+#define AT91C_ID_23_Reserved ((unsigned int) 23) // Reserved
+#define AT91C_ID_24_Reserved ((unsigned int) 24) // Reserved
+#define AT91C_ID_25_Reserved ((unsigned int) 25) // Reserved
+#define AT91C_ID_26_Reserved ((unsigned int) 26) // Reserved
+#define AT91C_ID_27_Reserved ((unsigned int) 27) // Reserved
+#define AT91C_ID_28_Reserved ((unsigned int) 28) // Reserved
+#define AT91C_ID_29_Reserved ((unsigned int) 29) // Reserved
+#define AT91C_ID_IRQ0   ((unsigned int) 30) // Advanced Interrupt Controller (IRQ0)
+#define AT91C_ID_IRQ1   ((unsigned int) 31) // Advanced Interrupt Controller (IRQ1)
+#define AT91C_ALL_INT   ((unsigned int) 0xC003FFFF) // ALL VALID INTERRUPTS
+// *****************************************************************************
+//               BASE ADDRESS DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_BASE_SYS       ((AT91PS_SYS) 	0xFFFFF000) // (SYS) Base Address
+#define AT91C_BASE_AIC       ((AT91PS_AIC) 	0xFFFFF000) // (AIC) Base Address
+#define AT91C_BASE_PDC_DBGU  ((AT91PS_PDC) 	0xFFFFF300) // (PDC_DBGU) Base Address
+#define AT91C_BASE_DBGU      ((AT91PS_DBGU) 	0xFFFFF200) // (DBGU) Base Address
+#define AT91C_BASE_PIOA      ((AT91PS_PIO) 	0xFFFFF400) // (PIOA) Base Address
+#define AT91C_BASE_PIOB      ((AT91PS_PIO) 	0xFFFFF600) // (PIOB) Base Address
+#define AT91C_BASE_CKGR      ((AT91PS_CKGR) 	0xFFFFFC20) // (CKGR) Base Address
+#define AT91C_BASE_PMC       ((AT91PS_PMC) 	0xFFFFFC00) // (PMC) Base Address
+#define AT91C_BASE_RSTC      ((AT91PS_RSTC) 	0xFFFFFD00) // (RSTC) Base Address
+#define AT91C_BASE_RTTC      ((AT91PS_RTTC) 	0xFFFFFD20) // (RTTC) Base Address
+#define AT91C_BASE_PITC      ((AT91PS_PITC) 	0xFFFFFD30) // (PITC) Base Address
+#define AT91C_BASE_WDTC      ((AT91PS_WDTC) 	0xFFFFFD40) // (WDTC) Base Address
+#define AT91C_BASE_VREG      ((AT91PS_VREG) 	0xFFFFFD60) // (VREG) Base Address
+#define AT91C_BASE_MC        ((AT91PS_MC) 	0xFFFFFF00) // (MC) Base Address
+#define AT91C_BASE_PDC_SPI1  ((AT91PS_PDC) 	0xFFFE4100) // (PDC_SPI1) Base Address
+#define AT91C_BASE_SPI1      ((AT91PS_SPI) 	0xFFFE4000) // (SPI1) Base Address
+#define AT91C_BASE_PDC_SPI0  ((AT91PS_PDC) 	0xFFFE0100) // (PDC_SPI0) Base Address
+#define AT91C_BASE_SPI0      ((AT91PS_SPI) 	0xFFFE0000) // (SPI0) Base Address
+#define AT91C_BASE_PDC_US1   ((AT91PS_PDC) 	0xFFFC4100) // (PDC_US1) Base Address
+#define AT91C_BASE_US1       ((AT91PS_USART) 	0xFFFC4000) // (US1) Base Address
+#define AT91C_BASE_PDC_US0   ((AT91PS_PDC) 	0xFFFC0100) // (PDC_US0) Base Address
+#define AT91C_BASE_US0       ((AT91PS_USART) 	0xFFFC0000) // (US0) Base Address
+#define AT91C_BASE_PDC_SSC   ((AT91PS_PDC) 	0xFFFD4100) // (PDC_SSC) Base Address
+#define AT91C_BASE_SSC       ((AT91PS_SSC) 	0xFFFD4000) // (SSC) Base Address
+#define AT91C_BASE_TWI       ((AT91PS_TWI) 	0xFFFB8000) // (TWI) Base Address
+#define AT91C_BASE_PWMC_CH3  ((AT91PS_PWMC_CH) 	0xFFFCC260) // (PWMC_CH3) Base Address
+#define AT91C_BASE_PWMC_CH2  ((AT91PS_PWMC_CH) 	0xFFFCC240) // (PWMC_CH2) Base Address
+#define AT91C_BASE_PWMC_CH1  ((AT91PS_PWMC_CH) 	0xFFFCC220) // (PWMC_CH1) Base Address
+#define AT91C_BASE_PWMC_CH0  ((AT91PS_PWMC_CH) 	0xFFFCC200) // (PWMC_CH0) Base Address
+#define AT91C_BASE_PWMC      ((AT91PS_PWMC) 	0xFFFCC000) // (PWMC) Base Address
+#define AT91C_BASE_UDP       ((AT91PS_UDP) 	0xFFFB0000) // (UDP) Base Address
+#define AT91C_BASE_TC0       ((AT91PS_TC) 	0xFFFA0000) // (TC0) Base Address
+#define AT91C_BASE_TC1       ((AT91PS_TC) 	0xFFFA0040) // (TC1) Base Address
+#define AT91C_BASE_TC2       ((AT91PS_TC) 	0xFFFA0080) // (TC2) Base Address
+#define AT91C_BASE_TCB       ((AT91PS_TCB) 	0xFFFA0000) // (TCB) Base Address
+#define AT91C_BASE_CAN_MB0   ((AT91PS_CAN_MB) 	0xFFFD0200) // (CAN_MB0) Base Address
+#define AT91C_BASE_CAN_MB1   ((AT91PS_CAN_MB) 	0xFFFD0220) // (CAN_MB1) Base Address
+#define AT91C_BASE_CAN_MB2   ((AT91PS_CAN_MB) 	0xFFFD0240) // (CAN_MB2) Base Address
+#define AT91C_BASE_CAN_MB3   ((AT91PS_CAN_MB) 	0xFFFD0260) // (CAN_MB3) Base Address
+#define AT91C_BASE_CAN_MB4   ((AT91PS_CAN_MB) 	0xFFFD0280) // (CAN_MB4) Base Address
+#define AT91C_BASE_CAN_MB5   ((AT91PS_CAN_MB) 	0xFFFD02A0) // (CAN_MB5) Base Address
+#define AT91C_BASE_CAN_MB6   ((AT91PS_CAN_MB) 	0xFFFD02C0) // (CAN_MB6) Base Address
+#define AT91C_BASE_CAN_MB7   ((AT91PS_CAN_MB) 	0xFFFD02E0) // (CAN_MB7) Base Address
+#define AT91C_BASE_CAN       ((AT91PS_CAN) 	0xFFFD0000) // (CAN) Base Address
+#define AT91C_BASE_EMAC      ((AT91PS_EMAC) 	0xFFFDC000) // (EMAC) Base Address
+#define AT91C_BASE_PDC_ADC   ((AT91PS_PDC) 	0xFFFD8100) // (PDC_ADC) Base Address
+#define AT91C_BASE_ADC       ((AT91PS_ADC) 	0xFFFD8000) // (ADC) Base Address
+// *****************************************************************************
+//               MEMORY MAPPING DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+// ISRAM
+#define AT91C_ISRAM	 ((char *) 	0x00200000) // Internal SRAM base address
+#define AT91C_ISRAM_SIZE	 ((unsigned int) 0x00010000) // Internal SRAM size in byte (64 Kbytes)
+// IFLASH
+#define AT91C_IFLASH	 ((char *) 	0x00100000) // Internal FLASH base address
+#define AT91C_IFLASH_SIZE	 ((unsigned int) 0x00040000) // Internal FLASH size in byte (256 Kbytes)
+#define AT91C_IFLASH_PAGE_SIZE	 ((unsigned int) 256) // Internal FLASH Page Size: 256 bytes
+#define AT91C_IFLASH_LOCK_REGION_SIZE	 ((unsigned int) 16384) // Internal FLASH Lock Region Size: 16 Kbytes
+#define AT91C_IFLASH_NB_OF_PAGES	 ((unsigned int) 1024) // Internal FLASH Number of Pages: 1024 bytes
+#define AT91C_IFLASH_NB_OF_LOCK_BITS	 ((unsigned int) 16) // Internal FLASH Number of Lock Bits: 16 bytes
+#endif /* __IAR_SYSTEMS_ICC__ */
+#ifdef __IAR_SYSTEMS_ASM__
+// - Hardware register definition
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR System Peripherals
+// - *****************************************************************************
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+// - *****************************************************************************
+// - -------- AIC_SMR : (AIC Offset: 0x0) Control Register --------
+AT91C_AIC_PRIOR           EQU (0x7 <<  0) ;- (AIC) Priority Level
+AT91C_AIC_PRIOR_LOWEST    EQU (0x0) ;- (AIC) Lowest priority level
+AT91C_AIC_PRIOR_HIGHEST   EQU (0x7) ;- (AIC) Highest priority level
+AT91C_AIC_SRCTYPE         EQU (0x3 <<  5) ;- (AIC) Interrupt Source Type
+AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL EQU (0x0 <<  5) ;- (AIC) Internal Sources Code Label High-level Sensitive
+AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL EQU (0x0 <<  5) ;- (AIC) External Sources Code Label Low-level Sensitive
+AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE EQU (0x1 <<  5) ;- (AIC) Internal Sources Code Label Positive Edge triggered
+AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE EQU (0x1 <<  5) ;- (AIC) External Sources Code Label Negative Edge triggered
+AT91C_AIC_SRCTYPE_HIGH_LEVEL EQU (0x2 <<  5) ;- (AIC) Internal Or External Sources Code Label High-level Sensitive
+AT91C_AIC_SRCTYPE_POSITIVE_EDGE EQU (0x3 <<  5) ;- (AIC) Internal Or External Sources Code Label Positive Edge triggered
+// - -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register --------
+AT91C_AIC_NFIQ            EQU (0x1 <<  0) ;- (AIC) NFIQ Status
+AT91C_AIC_NIRQ            EQU (0x1 <<  1) ;- (AIC) NIRQ Status
+// - -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) --------
+AT91C_AIC_DCR_PROT        EQU (0x1 <<  0) ;- (AIC) Protection Mode
+AT91C_AIC_DCR_GMSK        EQU (0x1 <<  1) ;- (AIC) General Mask
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
+// - *****************************************************************************
+// - -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register --------
+AT91C_PDC_RXTEN           EQU (0x1 <<  0) ;- (PDC) Receiver Transfer Enable
+AT91C_PDC_RXTDIS          EQU (0x1 <<  1) ;- (PDC) Receiver Transfer Disable
+AT91C_PDC_TXTEN           EQU (0x1 <<  8) ;- (PDC) Transmitter Transfer Enable
+AT91C_PDC_TXTDIS          EQU (0x1 <<  9) ;- (PDC) Transmitter Transfer Disable
+// - -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Debug Unit
+// - *****************************************************************************
+// - -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register --------
+AT91C_US_RSTRX            EQU (0x1 <<  2) ;- (DBGU) Reset Receiver
+AT91C_US_RSTTX            EQU (0x1 <<  3) ;- (DBGU) Reset Transmitter
+AT91C_US_RXEN             EQU (0x1 <<  4) ;- (DBGU) Receiver Enable
+AT91C_US_RXDIS            EQU (0x1 <<  5) ;- (DBGU) Receiver Disable
+AT91C_US_TXEN             EQU (0x1 <<  6) ;- (DBGU) Transmitter Enable
+AT91C_US_TXDIS            EQU (0x1 <<  7) ;- (DBGU) Transmitter Disable
+AT91C_US_RSTSTA           EQU (0x1 <<  8) ;- (DBGU) Reset Status Bits
+// - -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register --------
+AT91C_US_PAR              EQU (0x7 <<  9) ;- (DBGU) Parity type
+AT91C_US_PAR_EVEN         EQU (0x0 <<  9) ;- (DBGU) Even Parity
+AT91C_US_PAR_ODD          EQU (0x1 <<  9) ;- (DBGU) Odd Parity
+AT91C_US_PAR_SPACE        EQU (0x2 <<  9) ;- (DBGU) Parity forced to 0 (Space)
+AT91C_US_PAR_MARK         EQU (0x3 <<  9) ;- (DBGU) Parity forced to 1 (Mark)
+AT91C_US_PAR_NONE         EQU (0x4 <<  9) ;- (DBGU) No Parity
+AT91C_US_PAR_MULTI_DROP   EQU (0x6 <<  9) ;- (DBGU) Multi-drop mode
+AT91C_US_CHMODE           EQU (0x3 << 14) ;- (DBGU) Channel Mode
+AT91C_US_CHMODE_NORMAL    EQU (0x0 << 14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+AT91C_US_CHMODE_AUTO      EQU (0x1 << 14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+AT91C_US_CHMODE_LOCAL     EQU (0x2 << 14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+AT91C_US_CHMODE_REMOTE    EQU (0x3 << 14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+// - -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register --------
+AT91C_US_RXRDY            EQU (0x1 <<  0) ;- (DBGU) RXRDY Interrupt
+AT91C_US_TXRDY            EQU (0x1 <<  1) ;- (DBGU) TXRDY Interrupt
+AT91C_US_ENDRX            EQU (0x1 <<  3) ;- (DBGU) End of Receive Transfer Interrupt
+AT91C_US_ENDTX            EQU (0x1 <<  4) ;- (DBGU) End of Transmit Interrupt
+AT91C_US_OVRE             EQU (0x1 <<  5) ;- (DBGU) Overrun Interrupt
+AT91C_US_FRAME            EQU (0x1 <<  6) ;- (DBGU) Framing Error Interrupt
+AT91C_US_PARE             EQU (0x1 <<  7) ;- (DBGU) Parity Error Interrupt
+AT91C_US_TXEMPTY          EQU (0x1 <<  9) ;- (DBGU) TXEMPTY Interrupt
+AT91C_US_TXBUFE           EQU (0x1 << 11) ;- (DBGU) TXBUFE Interrupt
+AT91C_US_RXBUFF           EQU (0x1 << 12) ;- (DBGU) RXBUFF Interrupt
+AT91C_US_COMM_TX          EQU (0x1 << 30) ;- (DBGU) COMM_TX Interrupt
+AT91C_US_COMM_RX          EQU (0x1 << 31) ;- (DBGU) COMM_RX Interrupt
+// - -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register --------
+// - -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------
+// - -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register --------
+// - -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register --------
+AT91C_US_FORCE_NTRST      EQU (0x1 <<  0) ;- (DBGU) Force NTRST in JTAG
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+// - *****************************************************************************
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+// - *****************************************************************************
+// - -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
+AT91C_CKGR_MOSCEN         EQU (0x1 <<  0) ;- (CKGR) Main Oscillator Enable
+AT91C_CKGR_OSCBYPASS      EQU (0x1 <<  1) ;- (CKGR) Main Oscillator Bypass
+AT91C_CKGR_OSCOUNT        EQU (0xFF <<  8) ;- (CKGR) Main Oscillator Start-up Time
+// - -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
+AT91C_CKGR_MAINF          EQU (0xFFFF <<  0) ;- (CKGR) Main Clock Frequency
+AT91C_CKGR_MAINRDY        EQU (0x1 << 16) ;- (CKGR) Main Clock Ready
+// - -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register --------
+AT91C_CKGR_DIV            EQU (0xFF <<  0) ;- (CKGR) Divider Selected
+AT91C_CKGR_DIV_0          EQU (0x0) ;- (CKGR) Divider output is 0
+AT91C_CKGR_DIV_BYPASS     EQU (0x1) ;- (CKGR) Divider is bypassed
+AT91C_CKGR_PLLCOUNT       EQU (0x3F <<  8) ;- (CKGR) PLL Counter
+AT91C_CKGR_OUT            EQU (0x3 << 14) ;- (CKGR) PLL Output Frequency Range
+AT91C_CKGR_OUT_0          EQU (0x0 << 14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_1          EQU (0x1 << 14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_2          EQU (0x2 << 14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_3          EQU (0x3 << 14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_MUL            EQU (0x7FF << 16) ;- (CKGR) PLL Multiplier
+AT91C_CKGR_USBDIV         EQU (0x3 << 28) ;- (CKGR) Divider for USB Clocks
+AT91C_CKGR_USBDIV_0       EQU (0x0 << 28) ;- (CKGR) Divider output is PLL clock output
+AT91C_CKGR_USBDIV_1       EQU (0x1 << 28) ;- (CKGR) Divider output is PLL clock output divided by 2
+AT91C_CKGR_USBDIV_2       EQU (0x2 << 28) ;- (CKGR) Divider output is PLL clock output divided by 4
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Power Management Controler
+// - *****************************************************************************
+// - -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
+AT91C_PMC_PCK             EQU (0x1 <<  0) ;- (PMC) Processor Clock
+AT91C_PMC_UDP             EQU (0x1 <<  7) ;- (PMC) USB Device Port Clock
+AT91C_PMC_PCK0            EQU (0x1 <<  8) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK1            EQU (0x1 <<  9) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK2            EQU (0x1 << 10) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK3            EQU (0x1 << 11) ;- (PMC) Programmable Clock Output
+// - -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
+// - -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
+// - -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register --------
+// - -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register --------
+// - -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register --------
+// - -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
+AT91C_PMC_CSS             EQU (0x3 <<  0) ;- (PMC) Programmable Clock Selection
+AT91C_PMC_CSS_SLOW_CLK    EQU (0x0) ;- (PMC) Slow Clock is selected
+AT91C_PMC_CSS_MAIN_CLK    EQU (0x1) ;- (PMC) Main Clock is selected
+AT91C_PMC_CSS_PLL_CLK     EQU (0x3) ;- (PMC) Clock from PLL is selected
+AT91C_PMC_PRES            EQU (0x7 <<  2) ;- (PMC) Programmable Clock Prescaler
+AT91C_PMC_PRES_CLK        EQU (0x0 <<  2) ;- (PMC) Selected clock
+AT91C_PMC_PRES_CLK_2      EQU (0x1 <<  2) ;- (PMC) Selected clock divided by 2
+AT91C_PMC_PRES_CLK_4      EQU (0x2 <<  2) ;- (PMC) Selected clock divided by 4
+AT91C_PMC_PRES_CLK_8      EQU (0x3 <<  2) ;- (PMC) Selected clock divided by 8
+AT91C_PMC_PRES_CLK_16     EQU (0x4 <<  2) ;- (PMC) Selected clock divided by 16
+AT91C_PMC_PRES_CLK_32     EQU (0x5 <<  2) ;- (PMC) Selected clock divided by 32
+AT91C_PMC_PRES_CLK_64     EQU (0x6 <<  2) ;- (PMC) Selected clock divided by 64
+// - -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
+// - -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
+AT91C_PMC_MOSCS           EQU (0x1 <<  0) ;- (PMC) MOSC Status/Enable/Disable/Mask
+AT91C_PMC_LOCK            EQU (0x1 <<  2) ;- (PMC) PLL Status/Enable/Disable/Mask
+AT91C_PMC_MCKRDY          EQU (0x1 <<  3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK0RDY         EQU (0x1 <<  8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK1RDY         EQU (0x1 <<  9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK2RDY         EQU (0x1 << 10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK3RDY         EQU (0x1 << 11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask
+// - -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
+// - -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
+// - -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Reset Controller Interface
+// - *****************************************************************************
+// - -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register --------
+AT91C_RSTC_PROCRST        EQU (0x1 <<  0) ;- (RSTC) Processor Reset
+AT91C_RSTC_PERRST         EQU (0x1 <<  2) ;- (RSTC) Peripheral Reset
+AT91C_RSTC_EXTRST         EQU (0x1 <<  3) ;- (RSTC) External Reset
+AT91C_RSTC_KEY            EQU (0xFF << 24) ;- (RSTC) Password
+// - -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register --------
+AT91C_RSTC_URSTS          EQU (0x1 <<  0) ;- (RSTC) User Reset Status
+AT91C_RSTC_BODSTS         EQU (0x1 <<  1) ;- (RSTC) Brownout Detection Status
+AT91C_RSTC_RSTTYP         EQU (0x7 <<  8) ;- (RSTC) Reset Type
+AT91C_RSTC_RSTTYP_POWERUP EQU (0x0 <<  8) ;- (RSTC) Power-up Reset. VDDCORE rising.
+AT91C_RSTC_RSTTYP_WAKEUP  EQU (0x1 <<  8) ;- (RSTC) WakeUp Reset. VDDCORE rising.
+AT91C_RSTC_RSTTYP_WATCHDOG EQU (0x2 <<  8) ;- (RSTC) Watchdog Reset. Watchdog overflow occured.
+AT91C_RSTC_RSTTYP_SOFTWARE EQU (0x3 <<  8) ;- (RSTC) Software Reset. Processor reset required by the software.
+AT91C_RSTC_RSTTYP_USER    EQU (0x4 <<  8) ;- (RSTC) User Reset. NRST pin detected low.
+AT91C_RSTC_RSTTYP_BROWNOUT EQU (0x5 <<  8) ;- (RSTC) Brownout Reset occured.
+AT91C_RSTC_NRSTL          EQU (0x1 << 16) ;- (RSTC) NRST pin level
+AT91C_RSTC_SRCMP          EQU (0x1 << 17) ;- (RSTC) Software Reset Command in Progress.
+// - -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register --------
+AT91C_RSTC_URSTEN         EQU (0x1 <<  0) ;- (RSTC) User Reset Enable
+AT91C_RSTC_URSTIEN        EQU (0x1 <<  4) ;- (RSTC) User Reset Interrupt Enable
+AT91C_RSTC_ERSTL          EQU (0xF <<  8) ;- (RSTC) User Reset Length
+AT91C_RSTC_BODIEN         EQU (0x1 << 16) ;- (RSTC) Brownout Detection Interrupt Enable
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
+// - *****************************************************************************
+// - -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register --------
+AT91C_RTTC_RTPRES         EQU (0xFFFF <<  0) ;- (RTTC) Real-time Timer Prescaler Value
+AT91C_RTTC_ALMIEN         EQU (0x1 << 16) ;- (RTTC) Alarm Interrupt Enable
+AT91C_RTTC_RTTINCIEN      EQU (0x1 << 17) ;- (RTTC) Real Time Timer Increment Interrupt Enable
+AT91C_RTTC_RTTRST         EQU (0x1 << 18) ;- (RTTC) Real Time Timer Restart
+// - -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register --------
+AT91C_RTTC_ALMV           EQU (0x0 <<  0) ;- (RTTC) Alarm Value
+// - -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register --------
+AT91C_RTTC_CRTV           EQU (0x0 <<  0) ;- (RTTC) Current Real-time Value
+// - -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register --------
+AT91C_RTTC_ALMS           EQU (0x1 <<  0) ;- (RTTC) Real-time Alarm Status
+AT91C_RTTC_RTTINC         EQU (0x1 <<  1) ;- (RTTC) Real-time Timer Increment
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
+// - *****************************************************************************
+// - -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register --------
+AT91C_PITC_PIV            EQU (0xFFFFF <<  0) ;- (PITC) Periodic Interval Value
+AT91C_PITC_PITEN          EQU (0x1 << 24) ;- (PITC) Periodic Interval Timer Enabled
+AT91C_PITC_PITIEN         EQU (0x1 << 25) ;- (PITC) Periodic Interval Timer Interrupt Enable
+// - -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register --------
+AT91C_PITC_PITS           EQU (0x1 <<  0) ;- (PITC) Periodic Interval Timer Status
+// - -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register --------
+AT91C_PITC_CPIV           EQU (0xFFFFF <<  0) ;- (PITC) Current Periodic Interval Value
+AT91C_PITC_PICNT          EQU (0xFFF << 20) ;- (PITC) Periodic Interval Counter
+// - -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
+// - *****************************************************************************
+// - -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register --------
+AT91C_WDTC_WDRSTT         EQU (0x1 <<  0) ;- (WDTC) Watchdog Restart
+AT91C_WDTC_KEY            EQU (0xFF << 24) ;- (WDTC) Watchdog KEY Password
+// - -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register --------
+AT91C_WDTC_WDV            EQU (0xFFF <<  0) ;- (WDTC) Watchdog Timer Restart
+AT91C_WDTC_WDFIEN         EQU (0x1 << 12) ;- (WDTC) Watchdog Fault Interrupt Enable
+AT91C_WDTC_WDRSTEN        EQU (0x1 << 13) ;- (WDTC) Watchdog Reset Enable
+AT91C_WDTC_WDRPROC        EQU (0x1 << 14) ;- (WDTC) Watchdog Timer Restart
+AT91C_WDTC_WDDIS          EQU (0x1 << 15) ;- (WDTC) Watchdog Disable
+AT91C_WDTC_WDD            EQU (0xFFF << 16) ;- (WDTC) Watchdog Delta Value
+AT91C_WDTC_WDDBGHLT       EQU (0x1 << 28) ;- (WDTC) Watchdog Debug Halt
+AT91C_WDTC_WDIDLEHLT      EQU (0x1 << 29) ;- (WDTC) Watchdog Idle Halt
+// - -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register --------
+AT91C_WDTC_WDUNF          EQU (0x1 <<  0) ;- (WDTC) Watchdog Underflow
+AT91C_WDTC_WDERR          EQU (0x1 <<  1) ;- (WDTC) Watchdog Error
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
+// - *****************************************************************************
+// - -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register --------
+AT91C_VREG_PSTDBY         EQU (0x1 <<  0) ;- (VREG) Voltage Regulator Power Standby Mode
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+// - *****************************************************************************
+// - -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
+AT91C_MC_RCB              EQU (0x1 <<  0) ;- (MC) Remap Command Bit
+// - -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
+AT91C_MC_UNDADD           EQU (0x1 <<  0) ;- (MC) Undefined Addess Abort Status
+AT91C_MC_MISADD           EQU (0x1 <<  1) ;- (MC) Misaligned Addess Abort Status
+AT91C_MC_ABTSZ            EQU (0x3 <<  8) ;- (MC) Abort Size Status
+AT91C_MC_ABTSZ_BYTE       EQU (0x0 <<  8) ;- (MC) Byte
+AT91C_MC_ABTSZ_HWORD      EQU (0x1 <<  8) ;- (MC) Half-word
+AT91C_MC_ABTSZ_WORD       EQU (0x2 <<  8) ;- (MC) Word
+AT91C_MC_ABTTYP           EQU (0x3 << 10) ;- (MC) Abort Type Status
+AT91C_MC_ABTTYP_DATAR     EQU (0x0 << 10) ;- (MC) Data Read
+AT91C_MC_ABTTYP_DATAW     EQU (0x1 << 10) ;- (MC) Data Write
+AT91C_MC_ABTTYP_FETCH     EQU (0x2 << 10) ;- (MC) Code Fetch
+AT91C_MC_MST0             EQU (0x1 << 16) ;- (MC) Master 0 Abort Source
+AT91C_MC_MST1             EQU (0x1 << 17) ;- (MC) Master 1 Abort Source
+AT91C_MC_SVMST0           EQU (0x1 << 24) ;- (MC) Saved Master 0 Abort Source
+AT91C_MC_SVMST1           EQU (0x1 << 25) ;- (MC) Saved Master 1 Abort Source
+// - -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register --------
+AT91C_MC_FRDY             EQU (0x1 <<  0) ;- (MC) Flash Ready
+AT91C_MC_LOCKE            EQU (0x1 <<  2) ;- (MC) Lock Error
+AT91C_MC_PROGE            EQU (0x1 <<  3) ;- (MC) Programming Error
+AT91C_MC_NEBP             EQU (0x1 <<  7) ;- (MC) No Erase Before Programming
+AT91C_MC_FWS              EQU (0x3 <<  8) ;- (MC) Flash Wait State
+AT91C_MC_FWS_0FWS         EQU (0x0 <<  8) ;- (MC) 1 cycle for Read, 2 for Write operations
+AT91C_MC_FWS_1FWS         EQU (0x1 <<  8) ;- (MC) 2 cycles for Read, 3 for Write operations
+AT91C_MC_FWS_2FWS         EQU (0x2 <<  8) ;- (MC) 3 cycles for Read, 4 for Write operations
+AT91C_MC_FWS_3FWS         EQU (0x3 <<  8) ;- (MC) 4 cycles for Read, 4 for Write operations
+AT91C_MC_FMCN             EQU (0xFF << 16) ;- (MC) Flash Microsecond Cycle Number
+// - -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register --------
+AT91C_MC_FCMD             EQU (0xF <<  0) ;- (MC) Flash Command
+AT91C_MC_FCMD_START_PROG  EQU (0x1) ;- (MC) Starts the programming of th epage specified by PAGEN.
+AT91C_MC_FCMD_LOCK        EQU (0x2) ;- (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+AT91C_MC_FCMD_PROG_AND_LOCK EQU (0x3) ;- (MC) The lock sequence automatically happens after the programming sequence is completed.
+AT91C_MC_FCMD_UNLOCK      EQU (0x4) ;- (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+AT91C_MC_FCMD_ERASE_ALL   EQU (0x8) ;- (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
+AT91C_MC_FCMD_SET_GP_NVM  EQU (0xB) ;- (MC) Set General Purpose NVM bits.
+AT91C_MC_FCMD_CLR_GP_NVM  EQU (0xD) ;- (MC) Clear General Purpose NVM bits.
+AT91C_MC_FCMD_SET_SECURITY EQU (0xF) ;- (MC) Set Security Bit.
+AT91C_MC_PAGEN            EQU (0x3FF <<  8) ;- (MC) Page Number
+AT91C_MC_KEY              EQU (0xFF << 24) ;- (MC) Writing Protect Key
+// - -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register --------
+AT91C_MC_SECURITY         EQU (0x1 <<  4) ;- (MC) Security Bit Status
+AT91C_MC_GPNVM0           EQU (0x1 <<  8) ;- (MC) Sector 0 Lock Status
+AT91C_MC_GPNVM1           EQU (0x1 <<  9) ;- (MC) Sector 1 Lock Status
+AT91C_MC_GPNVM2           EQU (0x1 << 10) ;- (MC) Sector 2 Lock Status
+AT91C_MC_GPNVM3           EQU (0x1 << 11) ;- (MC) Sector 3 Lock Status
+AT91C_MC_GPNVM4           EQU (0x1 << 12) ;- (MC) Sector 4 Lock Status
+AT91C_MC_GPNVM5           EQU (0x1 << 13) ;- (MC) Sector 5 Lock Status
+AT91C_MC_GPNVM6           EQU (0x1 << 14) ;- (MC) Sector 6 Lock Status
+AT91C_MC_GPNVM7           EQU (0x1 << 15) ;- (MC) Sector 7 Lock Status
+AT91C_MC_LOCKS0           EQU (0x1 << 16) ;- (MC) Sector 0 Lock Status
+AT91C_MC_LOCKS1           EQU (0x1 << 17) ;- (MC) Sector 1 Lock Status
+AT91C_MC_LOCKS2           EQU (0x1 << 18) ;- (MC) Sector 2 Lock Status
+AT91C_MC_LOCKS3           EQU (0x1 << 19) ;- (MC) Sector 3 Lock Status
+AT91C_MC_LOCKS4           EQU (0x1 << 20) ;- (MC) Sector 4 Lock Status
+AT91C_MC_LOCKS5           EQU (0x1 << 21) ;- (MC) Sector 5 Lock Status
+AT91C_MC_LOCKS6           EQU (0x1 << 22) ;- (MC) Sector 6 Lock Status
+AT91C_MC_LOCKS7           EQU (0x1 << 23) ;- (MC) Sector 7 Lock Status
+AT91C_MC_LOCKS8           EQU (0x1 << 24) ;- (MC) Sector 8 Lock Status
+AT91C_MC_LOCKS9           EQU (0x1 << 25) ;- (MC) Sector 9 Lock Status
+AT91C_MC_LOCKS10          EQU (0x1 << 26) ;- (MC) Sector 10 Lock Status
+AT91C_MC_LOCKS11          EQU (0x1 << 27) ;- (MC) Sector 11 Lock Status
+AT91C_MC_LOCKS12          EQU (0x1 << 28) ;- (MC) Sector 12 Lock Status
+AT91C_MC_LOCKS13          EQU (0x1 << 29) ;- (MC) Sector 13 Lock Status
+AT91C_MC_LOCKS14          EQU (0x1 << 30) ;- (MC) Sector 14 Lock Status
+AT91C_MC_LOCKS15          EQU (0x1 << 31) ;- (MC) Sector 15 Lock Status
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+// - *****************************************************************************
+// - -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register --------
+AT91C_SPI_SPIEN           EQU (0x1 <<  0) ;- (SPI) SPI Enable
+AT91C_SPI_SPIDIS          EQU (0x1 <<  1) ;- (SPI) SPI Disable
+AT91C_SPI_SWRST           EQU (0x1 <<  7) ;- (SPI) SPI Software reset
+AT91C_SPI_LASTXFER        EQU (0x1 << 24) ;- (SPI) SPI Last Transfer
+// - -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register --------
+AT91C_SPI_MSTR            EQU (0x1 <<  0) ;- (SPI) Master/Slave Mode
+AT91C_SPI_PS              EQU (0x1 <<  1) ;- (SPI) Peripheral Select
+AT91C_SPI_PS_FIXED        EQU (0x0 <<  1) ;- (SPI) Fixed Peripheral Select
+AT91C_SPI_PS_VARIABLE     EQU (0x1 <<  1) ;- (SPI) Variable Peripheral Select
+AT91C_SPI_PCSDEC          EQU (0x1 <<  2) ;- (SPI) Chip Select Decode
+AT91C_SPI_FDIV            EQU (0x1 <<  3) ;- (SPI) Clock Selection
+AT91C_SPI_MODFDIS         EQU (0x1 <<  4) ;- (SPI) Mode Fault Detection
+AT91C_SPI_LLB             EQU (0x1 <<  7) ;- (SPI) Clock Selection
+AT91C_SPI_PCS             EQU (0xF << 16) ;- (SPI) Peripheral Chip Select
+AT91C_SPI_DLYBCS          EQU (0xFF << 24) ;- (SPI) Delay Between Chip Selects
+// - -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register --------
+AT91C_SPI_RD              EQU (0xFFFF <<  0) ;- (SPI) Receive Data
+AT91C_SPI_RPCS            EQU (0xF << 16) ;- (SPI) Peripheral Chip Select Status
+// - -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register --------
+AT91C_SPI_TD              EQU (0xFFFF <<  0) ;- (SPI) Transmit Data
+AT91C_SPI_TPCS            EQU (0xF << 16) ;- (SPI) Peripheral Chip Select Status
+// - -------- SPI_SR : (SPI Offset: 0x10) Status Register --------
+AT91C_SPI_RDRF            EQU (0x1 <<  0) ;- (SPI) Receive Data Register Full
+AT91C_SPI_TDRE            EQU (0x1 <<  1) ;- (SPI) Transmit Data Register Empty
+AT91C_SPI_MODF            EQU (0x1 <<  2) ;- (SPI) Mode Fault Error
+AT91C_SPI_OVRES           EQU (0x1 <<  3) ;- (SPI) Overrun Error Status
+AT91C_SPI_ENDRX           EQU (0x1 <<  4) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_ENDTX           EQU (0x1 <<  5) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_RXBUFF          EQU (0x1 <<  6) ;- (SPI) RXBUFF Interrupt
+AT91C_SPI_TXBUFE          EQU (0x1 <<  7) ;- (SPI) TXBUFE Interrupt
+AT91C_SPI_NSSR            EQU (0x1 <<  8) ;- (SPI) NSSR Interrupt
+AT91C_SPI_TXEMPTY         EQU (0x1 <<  9) ;- (SPI) TXEMPTY Interrupt
+AT91C_SPI_SPIENS          EQU (0x1 << 16) ;- (SPI) Enable Status
+// - -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register --------
+// - -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register --------
+// - -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register --------
+// - -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register --------
+AT91C_SPI_CPOL            EQU (0x1 <<  0) ;- (SPI) Clock Polarity
+AT91C_SPI_NCPHA           EQU (0x1 <<  1) ;- (SPI) Clock Phase
+AT91C_SPI_CSAAT           EQU (0x1 <<  3) ;- (SPI) Chip Select Active After Transfer
+AT91C_SPI_BITS            EQU (0xF <<  4) ;- (SPI) Bits Per Transfer
+AT91C_SPI_BITS_8          EQU (0x0 <<  4) ;- (SPI) 8 Bits Per transfer
+AT91C_SPI_BITS_9          EQU (0x1 <<  4) ;- (SPI) 9 Bits Per transfer
+AT91C_SPI_BITS_10         EQU (0x2 <<  4) ;- (SPI) 10 Bits Per transfer
+AT91C_SPI_BITS_11         EQU (0x3 <<  4) ;- (SPI) 11 Bits Per transfer
+AT91C_SPI_BITS_12         EQU (0x4 <<  4) ;- (SPI) 12 Bits Per transfer
+AT91C_SPI_BITS_13         EQU (0x5 <<  4) ;- (SPI) 13 Bits Per transfer
+AT91C_SPI_BITS_14         EQU (0x6 <<  4) ;- (SPI) 14 Bits Per transfer
+AT91C_SPI_BITS_15         EQU (0x7 <<  4) ;- (SPI) 15 Bits Per transfer
+AT91C_SPI_BITS_16         EQU (0x8 <<  4) ;- (SPI) 16 Bits Per transfer
+AT91C_SPI_SCBR            EQU (0xFF <<  8) ;- (SPI) Serial Clock Baud Rate
+AT91C_SPI_DLYBS           EQU (0xFF << 16) ;- (SPI) Delay Before SPCK
+AT91C_SPI_DLYBCT          EQU (0xFF << 24) ;- (SPI) Delay Between Consecutive Transfers
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Usart
+// - *****************************************************************************
+// - -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register --------
+AT91C_US_STTBRK           EQU (0x1 <<  9) ;- (USART) Start Break
+AT91C_US_STPBRK           EQU (0x1 << 10) ;- (USART) Stop Break
+AT91C_US_STTTO            EQU (0x1 << 11) ;- (USART) Start Time-out
+AT91C_US_SENDA            EQU (0x1 << 12) ;- (USART) Send Address
+AT91C_US_RSTIT            EQU (0x1 << 13) ;- (USART) Reset Iterations
+AT91C_US_RSTNACK          EQU (0x1 << 14) ;- (USART) Reset Non Acknowledge
+AT91C_US_RETTO            EQU (0x1 << 15) ;- (USART) Rearm Time-out
+AT91C_US_DTREN            EQU (0x1 << 16) ;- (USART) Data Terminal ready Enable
+AT91C_US_DTRDIS           EQU (0x1 << 17) ;- (USART) Data Terminal ready Disable
+AT91C_US_RTSEN            EQU (0x1 << 18) ;- (USART) Request to Send enable
+AT91C_US_RTSDIS           EQU (0x1 << 19) ;- (USART) Request to Send Disable
+// - -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register --------
+AT91C_US_USMODE           EQU (0xF <<  0) ;- (USART) Usart mode
+AT91C_US_USMODE_NORMAL    EQU (0x0) ;- (USART) Normal
+AT91C_US_USMODE_RS485     EQU (0x1) ;- (USART) RS485
+AT91C_US_USMODE_HWHSH     EQU (0x2) ;- (USART) Hardware Handshaking
+AT91C_US_USMODE_MODEM     EQU (0x3) ;- (USART) Modem
+AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0
+AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1
+AT91C_US_USMODE_IRDA      EQU (0x8) ;- (USART) IrDA
+AT91C_US_USMODE_SWHSH     EQU (0xC) ;- (USART) Software Handshaking
+AT91C_US_CLKS             EQU (0x3 <<  4) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CLKS_CLOCK       EQU (0x0 <<  4) ;- (USART) Clock
+AT91C_US_CLKS_FDIV1       EQU (0x1 <<  4) ;- (USART) fdiv1
+AT91C_US_CLKS_SLOW        EQU (0x2 <<  4) ;- (USART) slow_clock (ARM)
+AT91C_US_CLKS_EXT         EQU (0x3 <<  4) ;- (USART) External (SCK)
+AT91C_US_CHRL             EQU (0x3 <<  6) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CHRL_5_BITS      EQU (0x0 <<  6) ;- (USART) Character Length: 5 bits
+AT91C_US_CHRL_6_BITS      EQU (0x1 <<  6) ;- (USART) Character Length: 6 bits
+AT91C_US_CHRL_7_BITS      EQU (0x2 <<  6) ;- (USART) Character Length: 7 bits
+AT91C_US_CHRL_8_BITS      EQU (0x3 <<  6) ;- (USART) Character Length: 8 bits
+AT91C_US_SYNC             EQU (0x1 <<  8) ;- (USART) Synchronous Mode Select
+AT91C_US_NBSTOP           EQU (0x3 << 12) ;- (USART) Number of Stop bits
+AT91C_US_NBSTOP_1_BIT     EQU (0x0 << 12) ;- (USART) 1 stop bit
+AT91C_US_NBSTOP_15_BIT    EQU (0x1 << 12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+AT91C_US_NBSTOP_2_BIT     EQU (0x2 << 12) ;- (USART) 2 stop bits
+AT91C_US_MSBF             EQU (0x1 << 16) ;- (USART) Bit Order
+AT91C_US_MODE9            EQU (0x1 << 17) ;- (USART) 9-bit Character length
+AT91C_US_CKLO             EQU (0x1 << 18) ;- (USART) Clock Output Select
+AT91C_US_OVER             EQU (0x1 << 19) ;- (USART) Over Sampling Mode
+AT91C_US_INACK            EQU (0x1 << 20) ;- (USART) Inhibit Non Acknowledge
+AT91C_US_DSNACK           EQU (0x1 << 21) ;- (USART) Disable Successive NACK
+AT91C_US_MAX_ITER         EQU (0x1 << 24) ;- (USART) Number of Repetitions
+AT91C_US_FILTER           EQU (0x1 << 28) ;- (USART) Receive Line Filter
+// - -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register --------
+AT91C_US_RXBRK            EQU (0x1 <<  2) ;- (USART) Break Received/End of Break
+AT91C_US_TIMEOUT          EQU (0x1 <<  8) ;- (USART) Receiver Time-out
+AT91C_US_ITERATION        EQU (0x1 << 10) ;- (USART) Max number of Repetitions Reached
+AT91C_US_NACK             EQU (0x1 << 13) ;- (USART) Non Acknowledge
+AT91C_US_RIIC             EQU (0x1 << 16) ;- (USART) Ring INdicator Input Change Flag
+AT91C_US_DSRIC            EQU (0x1 << 17) ;- (USART) Data Set Ready Input Change Flag
+AT91C_US_DCDIC            EQU (0x1 << 18) ;- (USART) Data Carrier Flag
+AT91C_US_CTSIC            EQU (0x1 << 19) ;- (USART) Clear To Send Input Change Flag
+// - -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register --------
+// - -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register --------
+// - -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register --------
+AT91C_US_RI               EQU (0x1 << 20) ;- (USART) Image of RI Input
+AT91C_US_DSR              EQU (0x1 << 21) ;- (USART) Image of DSR Input
+AT91C_US_DCD              EQU (0x1 << 22) ;- (USART) Image of DCD Input
+AT91C_US_CTS              EQU (0x1 << 23) ;- (USART) Image of CTS Input
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+// - *****************************************************************************
+// - -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register --------
+AT91C_SSC_RXEN            EQU (0x1 <<  0) ;- (SSC) Receive Enable
+AT91C_SSC_RXDIS           EQU (0x1 <<  1) ;- (SSC) Receive Disable
+AT91C_SSC_TXEN            EQU (0x1 <<  8) ;- (SSC) Transmit Enable
+AT91C_SSC_TXDIS           EQU (0x1 <<  9) ;- (SSC) Transmit Disable
+AT91C_SSC_SWRST           EQU (0x1 << 15) ;- (SSC) Software Reset
+// - -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register --------
+AT91C_SSC_CKS             EQU (0x3 <<  0) ;- (SSC) Receive/Transmit Clock Selection
+AT91C_SSC_CKS_DIV         EQU (0x0) ;- (SSC) Divided Clock
+AT91C_SSC_CKS_TK          EQU (0x1) ;- (SSC) TK Clock signal
+AT91C_SSC_CKS_RK          EQU (0x2) ;- (SSC) RK pin
+AT91C_SSC_CKO             EQU (0x7 <<  2) ;- (SSC) Receive/Transmit Clock Output Mode Selection
+AT91C_SSC_CKO_NONE        EQU (0x0 <<  2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+AT91C_SSC_CKO_CONTINOUS   EQU (0x1 <<  2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output
+AT91C_SSC_CKO_DATA_TX     EQU (0x2 <<  2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+AT91C_SSC_CKI             EQU (0x1 <<  5) ;- (SSC) Receive/Transmit Clock Inversion
+AT91C_SSC_CKG             EQU (0x3 <<  6) ;- (SSC) Receive/Transmit Clock Gating Selection
+AT91C_SSC_CKG_NONE        EQU (0x0 <<  6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock
+AT91C_SSC_CKG_LOW         EQU (0x1 <<  6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low
+AT91C_SSC_CKG_HIGH        EQU (0x2 <<  6) ;- (SSC) Receive/Transmit Clock enabled only if RF High
+AT91C_SSC_START           EQU (0xF <<  8) ;- (SSC) Receive/Transmit Start Selection
+AT91C_SSC_START_CONTINOUS EQU (0x0 <<  8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+AT91C_SSC_START_TX        EQU (0x1 <<  8) ;- (SSC) Transmit/Receive start
+AT91C_SSC_START_LOW_RF    EQU (0x2 <<  8) ;- (SSC) Detection of a low level on RF input
+AT91C_SSC_START_HIGH_RF   EQU (0x3 <<  8) ;- (SSC) Detection of a high level on RF input
+AT91C_SSC_START_FALL_RF   EQU (0x4 <<  8) ;- (SSC) Detection of a falling edge on RF input
+AT91C_SSC_START_RISE_RF   EQU (0x5 <<  8) ;- (SSC) Detection of a rising edge on RF input
+AT91C_SSC_START_LEVEL_RF  EQU (0x6 <<  8) ;- (SSC) Detection of any level change on RF input
+AT91C_SSC_START_EDGE_RF   EQU (0x7 <<  8) ;- (SSC) Detection of any edge on RF input
+AT91C_SSC_START_0         EQU (0x8 <<  8) ;- (SSC) Compare 0
+AT91C_SSC_STOP            EQU (0x1 << 12) ;- (SSC) Receive Stop Selection
+AT91C_SSC_STTDLY          EQU (0xFF << 16) ;- (SSC) Receive/Transmit Start Delay
+AT91C_SSC_PERIOD          EQU (0xFF << 24) ;- (SSC) Receive/Transmit Period Divider Selection
+// - -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register --------
+AT91C_SSC_DATLEN          EQU (0x1F <<  0) ;- (SSC) Data Length
+AT91C_SSC_LOOP            EQU (0x1 <<  5) ;- (SSC) Loop Mode
+AT91C_SSC_MSBF            EQU (0x1 <<  7) ;- (SSC) Most Significant Bit First
+AT91C_SSC_DATNB           EQU (0xF <<  8) ;- (SSC) Data Number per Frame
+AT91C_SSC_FSLEN           EQU (0xF << 16) ;- (SSC) Receive/Transmit Frame Sync length
+AT91C_SSC_FSOS            EQU (0x7 << 20) ;- (SSC) Receive/Transmit Frame Sync Output Selection
+AT91C_SSC_FSOS_NONE       EQU (0x0 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+AT91C_SSC_FSOS_NEGATIVE   EQU (0x1 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+AT91C_SSC_FSOS_POSITIVE   EQU (0x2 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+AT91C_SSC_FSOS_LOW        EQU (0x3 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+AT91C_SSC_FSOS_HIGH       EQU (0x4 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+AT91C_SSC_FSOS_TOGGLE     EQU (0x5 << 20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+AT91C_SSC_FSEDGE          EQU (0x1 << 24) ;- (SSC) Frame Sync Edge Detection
+// - -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register --------
+// - -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register --------
+AT91C_SSC_DATDEF          EQU (0x1 <<  5) ;- (SSC) Data Default Value
+AT91C_SSC_FSDEN           EQU (0x1 << 23) ;- (SSC) Frame Sync Data Enable
+// - -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register --------
+AT91C_SSC_TXRDY           EQU (0x1 <<  0) ;- (SSC) Transmit Ready
+AT91C_SSC_TXEMPTY         EQU (0x1 <<  1) ;- (SSC) Transmit Empty
+AT91C_SSC_ENDTX           EQU (0x1 <<  2) ;- (SSC) End Of Transmission
+AT91C_SSC_TXBUFE          EQU (0x1 <<  3) ;- (SSC) Transmit Buffer Empty
+AT91C_SSC_RXRDY           EQU (0x1 <<  4) ;- (SSC) Receive Ready
+AT91C_SSC_OVRUN           EQU (0x1 <<  5) ;- (SSC) Receive Overrun
+AT91C_SSC_ENDRX           EQU (0x1 <<  6) ;- (SSC) End of Reception
+AT91C_SSC_RXBUFF          EQU (0x1 <<  7) ;- (SSC) Receive Buffer Full
+AT91C_SSC_CP0             EQU (0x1 <<  8) ;- (SSC) Compare 0
+AT91C_SSC_CP1             EQU (0x1 <<  9) ;- (SSC) Compare 1
+AT91C_SSC_TXSYN           EQU (0x1 << 10) ;- (SSC) Transmit Sync
+AT91C_SSC_RXSYN           EQU (0x1 << 11) ;- (SSC) Receive Sync
+AT91C_SSC_TXENA           EQU (0x1 << 16) ;- (SSC) Transmit Enable
+AT91C_SSC_RXENA           EQU (0x1 << 17) ;- (SSC) Receive Enable
+// - -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register --------
+// - -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register --------
+// - -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Two-wire Interface
+// - *****************************************************************************
+// - -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register --------
+AT91C_TWI_START           EQU (0x1 <<  0) ;- (TWI) Send a START Condition
+AT91C_TWI_STOP            EQU (0x1 <<  1) ;- (TWI) Send a STOP Condition
+AT91C_TWI_MSEN            EQU (0x1 <<  2) ;- (TWI) TWI Master Transfer Enabled
+AT91C_TWI_MSDIS           EQU (0x1 <<  3) ;- (TWI) TWI Master Transfer Disabled
+AT91C_TWI_SWRST           EQU (0x1 <<  7) ;- (TWI) Software Reset
+// - -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register --------
+AT91C_TWI_IADRSZ          EQU (0x3 <<  8) ;- (TWI) Internal Device Address Size
+AT91C_TWI_IADRSZ_NO       EQU (0x0 <<  8) ;- (TWI) No internal device address
+AT91C_TWI_IADRSZ_1_BYTE   EQU (0x1 <<  8) ;- (TWI) One-byte internal device address
+AT91C_TWI_IADRSZ_2_BYTE   EQU (0x2 <<  8) ;- (TWI) Two-byte internal device address
+AT91C_TWI_IADRSZ_3_BYTE   EQU (0x3 <<  8) ;- (TWI) Three-byte internal device address
+AT91C_TWI_MREAD           EQU (0x1 << 12) ;- (TWI) Master Read Direction
+AT91C_TWI_DADR            EQU (0x7F << 16) ;- (TWI) Device Address
+// - -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register --------
+AT91C_TWI_CLDIV           EQU (0xFF <<  0) ;- (TWI) Clock Low Divider
+AT91C_TWI_CHDIV           EQU (0xFF <<  8) ;- (TWI) Clock High Divider
+AT91C_TWI_CKDIV           EQU (0x7 << 16) ;- (TWI) Clock Divider
+// - -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register --------
+AT91C_TWI_TXCOMP          EQU (0x1 <<  0) ;- (TWI) Transmission Completed
+AT91C_TWI_RXRDY           EQU (0x1 <<  1) ;- (TWI) Receive holding register ReaDY
+AT91C_TWI_TXRDY           EQU (0x1 <<  2) ;- (TWI) Transmit holding register ReaDY
+AT91C_TWI_OVRE            EQU (0x1 <<  6) ;- (TWI) Overrun Error
+AT91C_TWI_UNRE            EQU (0x1 <<  7) ;- (TWI) Underrun Error
+AT91C_TWI_NACK            EQU (0x1 <<  8) ;- (TWI) Not Acknowledged
+// - -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register --------
+// - -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register --------
+// - -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
+// - *****************************************************************************
+// - -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register --------
+AT91C_PWMC_CPRE           EQU (0xF <<  0) ;- (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
+AT91C_PWMC_CPRE_MCK       EQU (0x0) ;- (PWMC_CH)
+AT91C_PWMC_CPRE_MCKA      EQU (0xB) ;- (PWMC_CH)
+AT91C_PWMC_CPRE_MCKB      EQU (0xC) ;- (PWMC_CH)
+AT91C_PWMC_CALG           EQU (0x1 <<  8) ;- (PWMC_CH) Channel Alignment
+AT91C_PWMC_CPOL           EQU (0x1 <<  9) ;- (PWMC_CH) Channel Polarity
+AT91C_PWMC_CPD            EQU (0x1 << 10) ;- (PWMC_CH) Channel Update Period
+// - -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register --------
+AT91C_PWMC_CDTY           EQU (0x0 <<  0) ;- (PWMC_CH) Channel Duty Cycle
+// - -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register --------
+AT91C_PWMC_CPRD           EQU (0x0 <<  0) ;- (PWMC_CH) Channel Period
+// - -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register --------
+AT91C_PWMC_CCNT           EQU (0x0 <<  0) ;- (PWMC_CH) Channel Counter
+// - -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register --------
+AT91C_PWMC_CUPD           EQU (0x0 <<  0) ;- (PWMC_CH) Channel Update
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
+// - *****************************************************************************
+// - -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register --------
+AT91C_PWMC_DIVA           EQU (0xFF <<  0) ;- (PWMC) CLKA divide factor.
+AT91C_PWMC_PREA           EQU (0xF <<  8) ;- (PWMC) Divider Input Clock Prescaler A
+AT91C_PWMC_PREA_MCK       EQU (0x0 <<  8) ;- (PWMC)
+AT91C_PWMC_DIVB           EQU (0xFF << 16) ;- (PWMC) CLKB divide factor.
+AT91C_PWMC_PREB           EQU (0xF << 24) ;- (PWMC) Divider Input Clock Prescaler B
+AT91C_PWMC_PREB_MCK       EQU (0x0 << 24) ;- (PWMC)
+// - -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register --------
+AT91C_PWMC_CHID0          EQU (0x1 <<  0) ;- (PWMC) Channel ID 0
+AT91C_PWMC_CHID1          EQU (0x1 <<  1) ;- (PWMC) Channel ID 1
+AT91C_PWMC_CHID2          EQU (0x1 <<  2) ;- (PWMC) Channel ID 2
+AT91C_PWMC_CHID3          EQU (0x1 <<  3) ;- (PWMC) Channel ID 3
+// - -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register --------
+// - -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register --------
+// - -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register --------
+// - -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register --------
+// - -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register --------
+// - -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR USB Device Interface
+// - *****************************************************************************
+// - -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register --------
+AT91C_UDP_FRM_NUM         EQU (0x7FF <<  0) ;- (UDP) Frame Number as Defined in the Packet Field Formats
+AT91C_UDP_FRM_ERR         EQU (0x1 << 16) ;- (UDP) Frame Error
+AT91C_UDP_FRM_OK          EQU (0x1 << 17) ;- (UDP) Frame OK
+// - -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register --------
+AT91C_UDP_FADDEN          EQU (0x1 <<  0) ;- (UDP) Function Address Enable
+AT91C_UDP_CONFG           EQU (0x1 <<  1) ;- (UDP) Configured
+AT91C_UDP_ESR             EQU (0x1 <<  2) ;- (UDP) Enable Send Resume
+AT91C_UDP_RSMINPR         EQU (0x1 <<  3) ;- (UDP) A Resume Has Been Sent to the Host
+AT91C_UDP_RMWUPE          EQU (0x1 <<  4) ;- (UDP) Remote Wake Up Enable
+// - -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register --------
+AT91C_UDP_FADD            EQU (0xFF <<  0) ;- (UDP) Function Address Value
+AT91C_UDP_FEN             EQU (0x1 <<  8) ;- (UDP) Function Enable
+// - -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register --------
+AT91C_UDP_EPINT0          EQU (0x1 <<  0) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT1          EQU (0x1 <<  1) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT2          EQU (0x1 <<  2) ;- (UDP) Endpoint 2 Interrupt
+AT91C_UDP_EPINT3          EQU (0x1 <<  3) ;- (UDP) Endpoint 3 Interrupt
+AT91C_UDP_EPINT4          EQU (0x1 <<  4) ;- (UDP) Endpoint 4 Interrupt
+AT91C_UDP_EPINT5          EQU (0x1 <<  5) ;- (UDP) Endpoint 5 Interrupt
+AT91C_UDP_RXSUSP          EQU (0x1 <<  8) ;- (UDP) USB Suspend Interrupt
+AT91C_UDP_RXRSM           EQU (0x1 <<  9) ;- (UDP) USB Resume Interrupt
+AT91C_UDP_EXTRSM          EQU (0x1 << 10) ;- (UDP) USB External Resume Interrupt
+AT91C_UDP_SOFINT          EQU (0x1 << 11) ;- (UDP) USB Start Of frame Interrupt
+AT91C_UDP_WAKEUP          EQU (0x1 << 13) ;- (UDP) USB Resume Interrupt
+// - -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register --------
+// - -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register --------
+// - -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register --------
+AT91C_UDP_ENDBUSRES       EQU (0x1 << 12) ;- (UDP) USB End Of Bus Reset Interrupt
+// - -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register --------
+// - -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register --------
+AT91C_UDP_EP0             EQU (0x1 <<  0) ;- (UDP) Reset Endpoint 0
+AT91C_UDP_EP1             EQU (0x1 <<  1) ;- (UDP) Reset Endpoint 1
+AT91C_UDP_EP2             EQU (0x1 <<  2) ;- (UDP) Reset Endpoint 2
+AT91C_UDP_EP3             EQU (0x1 <<  3) ;- (UDP) Reset Endpoint 3
+AT91C_UDP_EP4             EQU (0x1 <<  4) ;- (UDP) Reset Endpoint 4
+AT91C_UDP_EP5             EQU (0x1 <<  5) ;- (UDP) Reset Endpoint 5
+// - -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register --------
+AT91C_UDP_TXCOMP          EQU (0x1 <<  0) ;- (UDP) Generates an IN packet with data previously written in the DPR
+AT91C_UDP_RX_DATA_BK0     EQU (0x1 <<  1) ;- (UDP) Receive Data Bank 0
+AT91C_UDP_RXSETUP         EQU (0x1 <<  2) ;- (UDP) Sends STALL to the Host (Control endpoints)
+AT91C_UDP_ISOERROR        EQU (0x1 <<  3) ;- (UDP) Isochronous error (Isochronous endpoints)
+AT91C_UDP_TXPKTRDY        EQU (0x1 <<  4) ;- (UDP) Transmit Packet Ready
+AT91C_UDP_FORCESTALL      EQU (0x1 <<  5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+AT91C_UDP_RX_DATA_BK1     EQU (0x1 <<  6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+AT91C_UDP_DIR             EQU (0x1 <<  7) ;- (UDP) Transfer Direction
+AT91C_UDP_EPTYPE          EQU (0x7 <<  8) ;- (UDP) Endpoint type
+AT91C_UDP_EPTYPE_CTRL     EQU (0x0 <<  8) ;- (UDP) Control
+AT91C_UDP_EPTYPE_ISO_OUT  EQU (0x1 <<  8) ;- (UDP) Isochronous OUT
+AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2 <<  8) ;- (UDP) Bulk OUT
+AT91C_UDP_EPTYPE_INT_OUT  EQU (0x3 <<  8) ;- (UDP) Interrupt OUT
+AT91C_UDP_EPTYPE_ISO_IN   EQU (0x5 <<  8) ;- (UDP) Isochronous IN
+AT91C_UDP_EPTYPE_BULK_IN  EQU (0x6 <<  8) ;- (UDP) Bulk IN
+AT91C_UDP_EPTYPE_INT_IN   EQU (0x7 <<  8) ;- (UDP) Interrupt IN
+AT91C_UDP_DTGLE           EQU (0x1 << 11) ;- (UDP) Data Toggle
+AT91C_UDP_EPEDS           EQU (0x1 << 15) ;- (UDP) Endpoint Enable Disable
+AT91C_UDP_RXBYTECNT       EQU (0x7FF << 16) ;- (UDP) Number Of Bytes Available in the FIFO
+// - -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register --------
+AT91C_UDP_TXVDIS          EQU (0x1 <<  8) ;- (UDP)
+AT91C_UDP_PUON            EQU (0x1 <<  9) ;- (UDP) Pull-up ON
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+// - *****************************************************************************
+// - -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register --------
+AT91C_TC_CLKEN            EQU (0x1 <<  0) ;- (TC) Counter Clock Enable Command
+AT91C_TC_CLKDIS           EQU (0x1 <<  1) ;- (TC) Counter Clock Disable Command
+AT91C_TC_SWTRG            EQU (0x1 <<  2) ;- (TC) Software Trigger Command
+// - -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode --------
+AT91C_TC_CLKS             EQU (0x7 <<  0) ;- (TC) Clock Selection
+AT91C_TC_CLKS_TIMER_DIV1_CLOCK EQU (0x0) ;- (TC) Clock selected: TIMER_DIV1_CLOCK
+AT91C_TC_CLKS_TIMER_DIV2_CLOCK EQU (0x1) ;- (TC) Clock selected: TIMER_DIV2_CLOCK
+AT91C_TC_CLKS_TIMER_DIV3_CLOCK EQU (0x2) ;- (TC) Clock selected: TIMER_DIV3_CLOCK
+AT91C_TC_CLKS_TIMER_DIV4_CLOCK EQU (0x3) ;- (TC) Clock selected: TIMER_DIV4_CLOCK
+AT91C_TC_CLKS_TIMER_DIV5_CLOCK EQU (0x4) ;- (TC) Clock selected: TIMER_DIV5_CLOCK
+AT91C_TC_CLKS_XC0         EQU (0x5) ;- (TC) Clock selected: XC0
+AT91C_TC_CLKS_XC1         EQU (0x6) ;- (TC) Clock selected: XC1
+AT91C_TC_CLKS_XC2         EQU (0x7) ;- (TC) Clock selected: XC2
+AT91C_TC_CLKI             EQU (0x1 <<  3) ;- (TC) Clock Invert
+AT91C_TC_BURST            EQU (0x3 <<  4) ;- (TC) Burst Signal Selection
+AT91C_TC_BURST_NONE       EQU (0x0 <<  4) ;- (TC) The clock is not gated by an external signal
+AT91C_TC_BURST_XC0        EQU (0x1 <<  4) ;- (TC) XC0 is ANDed with the selected clock
+AT91C_TC_BURST_XC1        EQU (0x2 <<  4) ;- (TC) XC1 is ANDed with the selected clock
+AT91C_TC_BURST_XC2        EQU (0x3 <<  4) ;- (TC) XC2 is ANDed with the selected clock
+AT91C_TC_CPCSTOP          EQU (0x1 <<  6) ;- (TC) Counter Clock Stopped with RC Compare
+AT91C_TC_LDBSTOP          EQU (0x1 <<  6) ;- (TC) Counter Clock Stopped with RB Loading
+AT91C_TC_CPCDIS           EQU (0x1 <<  7) ;- (TC) Counter Clock Disable with RC Compare
+AT91C_TC_LDBDIS           EQU (0x1 <<  7) ;- (TC) Counter Clock Disabled with RB Loading
+AT91C_TC_ETRGEDG          EQU (0x3 <<  8) ;- (TC) External Trigger Edge Selection
+AT91C_TC_ETRGEDG_NONE     EQU (0x0 <<  8) ;- (TC) Edge: None
+AT91C_TC_ETRGEDG_RISING   EQU (0x1 <<  8) ;- (TC) Edge: rising edge
+AT91C_TC_ETRGEDG_FALLING  EQU (0x2 <<  8) ;- (TC) Edge: falling edge
+AT91C_TC_ETRGEDG_BOTH     EQU (0x3 <<  8) ;- (TC) Edge: each edge
+AT91C_TC_EEVTEDG          EQU (0x3 <<  8) ;- (TC) External Event Edge Selection
+AT91C_TC_EEVTEDG_NONE     EQU (0x0 <<  8) ;- (TC) Edge: None
+AT91C_TC_EEVTEDG_RISING   EQU (0x1 <<  8) ;- (TC) Edge: rising edge
+AT91C_TC_EEVTEDG_FALLING  EQU (0x2 <<  8) ;- (TC) Edge: falling edge
+AT91C_TC_EEVTEDG_BOTH     EQU (0x3 <<  8) ;- (TC) Edge: each edge
+AT91C_TC_EEVT             EQU (0x3 << 10) ;- (TC) External Event  Selection
+AT91C_TC_EEVT_TIOB        EQU (0x0 << 10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input
+AT91C_TC_EEVT_XC0         EQU (0x1 << 10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output
+AT91C_TC_EEVT_XC1         EQU (0x2 << 10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output
+AT91C_TC_EEVT_XC2         EQU (0x3 << 10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output
+AT91C_TC_ABETRG           EQU (0x1 << 10) ;- (TC) TIOA or TIOB External Trigger Selection
+AT91C_TC_ENETRG           EQU (0x1 << 12) ;- (TC) External Event Trigger enable
+AT91C_TC_WAVESEL          EQU (0x3 << 13) ;- (TC) Waveform  Selection
+AT91C_TC_WAVESEL_UP       EQU (0x0 << 13) ;- (TC) UP mode without atomatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN   EQU (0x1 << 13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UP_AUTO  EQU (0x2 << 13) ;- (TC) UP mode with automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3 << 13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare
+AT91C_TC_CPCTRG           EQU (0x1 << 14) ;- (TC) RC Compare Trigger Enable
+AT91C_TC_WAVE             EQU (0x1 << 15) ;- (TC)
+AT91C_TC_ACPA             EQU (0x3 << 16) ;- (TC) RA Compare Effect on TIOA
+AT91C_TC_ACPA_NONE        EQU (0x0 << 16) ;- (TC) Effect: none
+AT91C_TC_ACPA_SET         EQU (0x1 << 16) ;- (TC) Effect: set
+AT91C_TC_ACPA_CLEAR       EQU (0x2 << 16) ;- (TC) Effect: clear
+AT91C_TC_ACPA_TOGGLE      EQU (0x3 << 16) ;- (TC) Effect: toggle
+AT91C_TC_LDRA             EQU (0x3 << 16) ;- (TC) RA Loading Selection
+AT91C_TC_LDRA_NONE        EQU (0x0 << 16) ;- (TC) Edge: None
+AT91C_TC_LDRA_RISING      EQU (0x1 << 16) ;- (TC) Edge: rising edge of TIOA
+AT91C_TC_LDRA_FALLING     EQU (0x2 << 16) ;- (TC) Edge: falling edge of TIOA
+AT91C_TC_LDRA_BOTH        EQU (0x3 << 16) ;- (TC) Edge: each edge of TIOA
+AT91C_TC_ACPC             EQU (0x3 << 18) ;- (TC) RC Compare Effect on TIOA
+AT91C_TC_ACPC_NONE        EQU (0x0 << 18) ;- (TC) Effect: none
+AT91C_TC_ACPC_SET         EQU (0x1 << 18) ;- (TC) Effect: set
+AT91C_TC_ACPC_CLEAR       EQU (0x2 << 18) ;- (TC) Effect: clear
+AT91C_TC_ACPC_TOGGLE      EQU (0x3 << 18) ;- (TC) Effect: toggle
+AT91C_TC_LDRB             EQU (0x3 << 18) ;- (TC) RB Loading Selection
+AT91C_TC_LDRB_NONE        EQU (0x0 << 18) ;- (TC) Edge: None
+AT91C_TC_LDRB_RISING      EQU (0x1 << 18) ;- (TC) Edge: rising edge of TIOA
+AT91C_TC_LDRB_FALLING     EQU (0x2 << 18) ;- (TC) Edge: falling edge of TIOA
+AT91C_TC_LDRB_BOTH        EQU (0x3 << 18) ;- (TC) Edge: each edge of TIOA
+AT91C_TC_AEEVT            EQU (0x3 << 20) ;- (TC) External Event Effect on TIOA
+AT91C_TC_AEEVT_NONE       EQU (0x0 << 20) ;- (TC) Effect: none
+AT91C_TC_AEEVT_SET        EQU (0x1 << 20) ;- (TC) Effect: set
+AT91C_TC_AEEVT_CLEAR      EQU (0x2 << 20) ;- (TC) Effect: clear
+AT91C_TC_AEEVT_TOGGLE     EQU (0x3 << 20) ;- (TC) Effect: toggle
+AT91C_TC_ASWTRG           EQU (0x3 << 22) ;- (TC) Software Trigger Effect on TIOA
+AT91C_TC_ASWTRG_NONE      EQU (0x0 << 22) ;- (TC) Effect: none
+AT91C_TC_ASWTRG_SET       EQU (0x1 << 22) ;- (TC) Effect: set
+AT91C_TC_ASWTRG_CLEAR     EQU (0x2 << 22) ;- (TC) Effect: clear
+AT91C_TC_ASWTRG_TOGGLE    EQU (0x3 << 22) ;- (TC) Effect: toggle
+AT91C_TC_BCPB             EQU (0x3 << 24) ;- (TC) RB Compare Effect on TIOB
+AT91C_TC_BCPB_NONE        EQU (0x0 << 24) ;- (TC) Effect: none
+AT91C_TC_BCPB_SET         EQU (0x1 << 24) ;- (TC) Effect: set
+AT91C_TC_BCPB_CLEAR       EQU (0x2 << 24) ;- (TC) Effect: clear
+AT91C_TC_BCPB_TOGGLE      EQU (0x3 << 24) ;- (TC) Effect: toggle
+AT91C_TC_BCPC             EQU (0x3 << 26) ;- (TC) RC Compare Effect on TIOB
+AT91C_TC_BCPC_NONE        EQU (0x0 << 26) ;- (TC) Effect: none
+AT91C_TC_BCPC_SET         EQU (0x1 << 26) ;- (TC) Effect: set
+AT91C_TC_BCPC_CLEAR       EQU (0x2 << 26) ;- (TC) Effect: clear
+AT91C_TC_BCPC_TOGGLE      EQU (0x3 << 26) ;- (TC) Effect: toggle
+AT91C_TC_BEEVT            EQU (0x3 << 28) ;- (TC) External Event Effect on TIOB
+AT91C_TC_BEEVT_NONE       EQU (0x0 << 28) ;- (TC) Effect: none
+AT91C_TC_BEEVT_SET        EQU (0x1 << 28) ;- (TC) Effect: set
+AT91C_TC_BEEVT_CLEAR      EQU (0x2 << 28) ;- (TC) Effect: clear
+AT91C_TC_BEEVT_TOGGLE     EQU (0x3 << 28) ;- (TC) Effect: toggle
+AT91C_TC_BSWTRG           EQU (0x3 << 30) ;- (TC) Software Trigger Effect on TIOB
+AT91C_TC_BSWTRG_NONE      EQU (0x0 << 30) ;- (TC) Effect: none
+AT91C_TC_BSWTRG_SET       EQU (0x1 << 30) ;- (TC) Effect: set
+AT91C_TC_BSWTRG_CLEAR     EQU (0x2 << 30) ;- (TC) Effect: clear
+AT91C_TC_BSWTRG_TOGGLE    EQU (0x3 << 30) ;- (TC) Effect: toggle
+// - -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register --------
+AT91C_TC_COVFS            EQU (0x1 <<  0) ;- (TC) Counter Overflow
+AT91C_TC_LOVRS            EQU (0x1 <<  1) ;- (TC) Load Overrun
+AT91C_TC_CPAS             EQU (0x1 <<  2) ;- (TC) RA Compare
+AT91C_TC_CPBS             EQU (0x1 <<  3) ;- (TC) RB Compare
+AT91C_TC_CPCS             EQU (0x1 <<  4) ;- (TC) RC Compare
+AT91C_TC_LDRAS            EQU (0x1 <<  5) ;- (TC) RA Loading
+AT91C_TC_LDRBS            EQU (0x1 <<  6) ;- (TC) RB Loading
+AT91C_TC_ETRGS            EQU (0x1 <<  7) ;- (TC) External Trigger
+AT91C_TC_CLKSTA           EQU (0x1 << 16) ;- (TC) Clock Enabling
+AT91C_TC_MTIOA            EQU (0x1 << 17) ;- (TC) TIOA Mirror
+AT91C_TC_MTIOB            EQU (0x1 << 18) ;- (TC) TIOA Mirror
+// - -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register --------
+// - -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register --------
+// - -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+// - *****************************************************************************
+// - -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register --------
+AT91C_TCB_SYNC            EQU (0x1 <<  0) ;- (TCB) Synchro Command
+// - -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register --------
+AT91C_TCB_TC0XC0S         EQU (0x3 <<  0) ;- (TCB) External Clock Signal 0 Selection
+AT91C_TCB_TC0XC0S_TCLK0   EQU (0x0) ;- (TCB) TCLK0 connected to XC0
+AT91C_TCB_TC0XC0S_NONE    EQU (0x1) ;- (TCB) None signal connected to XC0
+AT91C_TCB_TC0XC0S_TIOA1   EQU (0x2) ;- (TCB) TIOA1 connected to XC0
+AT91C_TCB_TC0XC0S_TIOA2   EQU (0x3) ;- (TCB) TIOA2 connected to XC0
+AT91C_TCB_TC1XC1S         EQU (0x3 <<  2) ;- (TCB) External Clock Signal 1 Selection
+AT91C_TCB_TC1XC1S_TCLK1   EQU (0x0 <<  2) ;- (TCB) TCLK1 connected to XC1
+AT91C_TCB_TC1XC1S_NONE    EQU (0x1 <<  2) ;- (TCB) None signal connected to XC1
+AT91C_TCB_TC1XC1S_TIOA0   EQU (0x2 <<  2) ;- (TCB) TIOA0 connected to XC1
+AT91C_TCB_TC1XC1S_TIOA2   EQU (0x3 <<  2) ;- (TCB) TIOA2 connected to XC1
+AT91C_TCB_TC2XC2S         EQU (0x3 <<  4) ;- (TCB) External Clock Signal 2 Selection
+AT91C_TCB_TC2XC2S_TCLK2   EQU (0x0 <<  4) ;- (TCB) TCLK2 connected to XC2
+AT91C_TCB_TC2XC2S_NONE    EQU (0x1 <<  4) ;- (TCB) None signal connected to XC2
+AT91C_TCB_TC2XC2S_TIOA0   EQU (0x2 <<  4) ;- (TCB) TIOA0 connected to XC2
+AT91C_TCB_TC2XC2S_TIOA1   EQU (0x3 <<  4) ;- (TCB) TIOA2 connected to XC2
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
+// - *****************************************************************************
+// - -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register --------
+AT91C_CAN_MTIMEMARK       EQU (0xFFFF <<  0) ;- (CAN_MB) Mailbox Timemark
+AT91C_CAN_PRIOR           EQU (0xF << 16) ;- (CAN_MB) Mailbox Priority
+AT91C_CAN_MOT             EQU (0x7 << 24) ;- (CAN_MB) Mailbox Object Type
+AT91C_CAN_MOT_DIS         EQU (0x0 << 24) ;- (CAN_MB)
+AT91C_CAN_MOT_RX          EQU (0x1 << 24) ;- (CAN_MB)
+AT91C_CAN_MOT_RXOVERWRITE EQU (0x2 << 24) ;- (CAN_MB)
+AT91C_CAN_MOT_TX          EQU (0x3 << 24) ;- (CAN_MB)
+AT91C_CAN_MOT_CONSUMER    EQU (0x4 << 24) ;- (CAN_MB)
+AT91C_CAN_MOT_PRODUCER    EQU (0x5 << 24) ;- (CAN_MB)
+// - -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register --------
+AT91C_CAN_MIDvB           EQU (0x3FFFF <<  0) ;- (CAN_MB) Complementary bits for identifier in extended mode
+AT91C_CAN_MIDvA           EQU (0x7FF << 18) ;- (CAN_MB) Identifier for standard frame mode
+AT91C_CAN_MIDE            EQU (0x1 << 29) ;- (CAN_MB) Identifier Version
+// - -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register --------
+// - -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register --------
+// - -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register --------
+AT91C_CAN_MTIMESTAMP      EQU (0xFFFF <<  0) ;- (CAN_MB) Timer Value
+AT91C_CAN_MDLC            EQU (0xF << 16) ;- (CAN_MB) Mailbox Data Length Code
+AT91C_CAN_MRTR            EQU (0x1 << 20) ;- (CAN_MB) Mailbox Remote Transmission Request
+AT91C_CAN_MABT            EQU (0x1 << 22) ;- (CAN_MB) Mailbox Message Abort
+AT91C_CAN_MRDY            EQU (0x1 << 23) ;- (CAN_MB) Mailbox Ready
+AT91C_CAN_MMI             EQU (0x1 << 24) ;- (CAN_MB) Mailbox Message Ignored
+// - -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register --------
+// - -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register --------
+// - -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register --------
+AT91C_CAN_MACR            EQU (0x1 << 22) ;- (CAN_MB) Abort Request for Mailbox
+AT91C_CAN_MTCR            EQU (0x1 << 23) ;- (CAN_MB) Mailbox Transfer Command
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Control Area Network Interface
+// - *****************************************************************************
+// - -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register --------
+AT91C_CAN_CANEN           EQU (0x1 <<  0) ;- (CAN) CAN Controller Enable
+AT91C_CAN_LPM             EQU (0x1 <<  1) ;- (CAN) Disable/Enable Low Power Mode
+AT91C_CAN_ABM             EQU (0x1 <<  2) ;- (CAN) Disable/Enable Autobaud/Listen Mode
+AT91C_CAN_OVL             EQU (0x1 <<  3) ;- (CAN) Disable/Enable Overload Frame
+AT91C_CAN_TEOF            EQU (0x1 <<  4) ;- (CAN) Time Stamp messages at each end of Frame
+AT91C_CAN_TTM             EQU (0x1 <<  5) ;- (CAN) Disable/Enable Time Trigger Mode
+AT91C_CAN_TIMFRZ          EQU (0x1 <<  6) ;- (CAN) Enable Timer Freeze
+AT91C_CAN_DRPT            EQU (0x1 <<  7) ;- (CAN) Disable Repeat
+// - -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register --------
+AT91C_CAN_MB0             EQU (0x1 <<  0) ;- (CAN) Mailbox 0 Flag
+AT91C_CAN_MB1             EQU (0x1 <<  1) ;- (CAN) Mailbox 1 Flag
+AT91C_CAN_MB2             EQU (0x1 <<  2) ;- (CAN) Mailbox 2 Flag
+AT91C_CAN_MB3             EQU (0x1 <<  3) ;- (CAN) Mailbox 3 Flag
+AT91C_CAN_MB4             EQU (0x1 <<  4) ;- (CAN) Mailbox 4 Flag
+AT91C_CAN_MB5             EQU (0x1 <<  5) ;- (CAN) Mailbox 5 Flag
+AT91C_CAN_MB6             EQU (0x1 <<  6) ;- (CAN) Mailbox 6 Flag
+AT91C_CAN_MB7             EQU (0x1 <<  7) ;- (CAN) Mailbox 7 Flag
+AT91C_CAN_MB8             EQU (0x1 <<  8) ;- (CAN) Mailbox 8 Flag
+AT91C_CAN_MB9             EQU (0x1 <<  9) ;- (CAN) Mailbox 9 Flag
+AT91C_CAN_MB10            EQU (0x1 << 10) ;- (CAN) Mailbox 10 Flag
+AT91C_CAN_MB11            EQU (0x1 << 11) ;- (CAN) Mailbox 11 Flag
+AT91C_CAN_MB12            EQU (0x1 << 12) ;- (CAN) Mailbox 12 Flag
+AT91C_CAN_MB13            EQU (0x1 << 13) ;- (CAN) Mailbox 13 Flag
+AT91C_CAN_MB14            EQU (0x1 << 14) ;- (CAN) Mailbox 14 Flag
+AT91C_CAN_MB15            EQU (0x1 << 15) ;- (CAN) Mailbox 15 Flag
+AT91C_CAN_ERRA            EQU (0x1 << 16) ;- (CAN) Error Active Mode Flag
+AT91C_CAN_WARN            EQU (0x1 << 17) ;- (CAN) Warning Limit Flag
+AT91C_CAN_ERRP            EQU (0x1 << 18) ;- (CAN) Error Passive Mode Flag
+AT91C_CAN_BOFF            EQU (0x1 << 19) ;- (CAN) Bus Off Mode Flag
+AT91C_CAN_SLEEP           EQU (0x1 << 20) ;- (CAN) Sleep Flag
+AT91C_CAN_WAKEUP          EQU (0x1 << 21) ;- (CAN) Wakeup Flag
+AT91C_CAN_TOVF            EQU (0x1 << 22) ;- (CAN) Timer Overflow Flag
+AT91C_CAN_TSTP            EQU (0x1 << 23) ;- (CAN) Timestamp Flag
+AT91C_CAN_CERR            EQU (0x1 << 24) ;- (CAN) CRC Error
+AT91C_CAN_SERR            EQU (0x1 << 25) ;- (CAN) Stuffing Error
+AT91C_CAN_AERR            EQU (0x1 << 26) ;- (CAN) Acknowledgment Error
+AT91C_CAN_FERR            EQU (0x1 << 27) ;- (CAN) Form Error
+AT91C_CAN_BERR            EQU (0x1 << 28) ;- (CAN) Bit Error
+// - -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register --------
+// - -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register --------
+// - -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register --------
+AT91C_CAN_RBSY            EQU (0x1 << 29) ;- (CAN) Receiver Busy
+AT91C_CAN_TBSY            EQU (0x1 << 30) ;- (CAN) Transmitter Busy
+AT91C_CAN_OVLY            EQU (0x1 << 31) ;- (CAN) Overload Busy
+// - -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register --------
+AT91C_CAN_PHASE2          EQU (0x7 <<  0) ;- (CAN) Phase 2 segment
+AT91C_CAN_PHASE1          EQU (0x7 <<  4) ;- (CAN) Phase 1 segment
+AT91C_CAN_PROPAG          EQU (0x7 <<  8) ;- (CAN) Programmation time segment
+AT91C_CAN_SYNC            EQU (0x3 << 12) ;- (CAN) Re-synchronization jump width segment
+AT91C_CAN_BRP             EQU (0x7F << 16) ;- (CAN) Baudrate Prescaler
+AT91C_CAN_SMP             EQU (0x1 << 24) ;- (CAN) Sampling mode
+// - -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register --------
+AT91C_CAN_TIMER           EQU (0xFFFF <<  0) ;- (CAN) Timer field
+// - -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register --------
+// - -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register --------
+AT91C_CAN_REC             EQU (0xFF <<  0) ;- (CAN) Receive Error Counter
+AT91C_CAN_TEC             EQU (0xFF << 16) ;- (CAN) Transmit Error Counter
+// - -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register --------
+AT91C_CAN_TIMRST          EQU (0x1 << 31) ;- (CAN) Timer Reset Field
+// - -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register --------
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
+// - *****************************************************************************
+// - -------- EMAC_NCR : (EMAC Offset: 0x0)  --------
+AT91C_EMAC_LB             EQU (0x1 <<  0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+AT91C_EMAC_LLB            EQU (0x1 <<  1) ;- (EMAC) Loopback local.
+AT91C_EMAC_RE             EQU (0x1 <<  2) ;- (EMAC) Receive enable.
+AT91C_EMAC_TE             EQU (0x1 <<  3) ;- (EMAC) Transmit enable.
+AT91C_EMAC_MPE            EQU (0x1 <<  4) ;- (EMAC) Management port enable.
+AT91C_EMAC_CLRSTAT        EQU (0x1 <<  5) ;- (EMAC) Clear statistics registers.
+AT91C_EMAC_INCSTAT        EQU (0x1 <<  6) ;- (EMAC) Increment statistics registers.
+AT91C_EMAC_WESTAT         EQU (0x1 <<  7) ;- (EMAC) Write enable for statistics registers.
+AT91C_EMAC_BP             EQU (0x1 <<  8) ;- (EMAC) Back pressure.
+AT91C_EMAC_TSTART         EQU (0x1 <<  9) ;- (EMAC) Start Transmission.
+AT91C_EMAC_THALT          EQU (0x1 << 10) ;- (EMAC) Transmission Halt.
+AT91C_EMAC_TPFR           EQU (0x1 << 11) ;- (EMAC) Transmit pause frame
+AT91C_EMAC_TZQ            EQU (0x1 << 12) ;- (EMAC) Transmit zero quantum pause frame
+// - -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register --------
+AT91C_EMAC_SPD            EQU (0x1 <<  0) ;- (EMAC) Speed.
+AT91C_EMAC_FD             EQU (0x1 <<  1) ;- (EMAC) Full duplex.
+AT91C_EMAC_JFRAME         EQU (0x1 <<  3) ;- (EMAC) Jumbo Frames.
+AT91C_EMAC_CAF            EQU (0x1 <<  4) ;- (EMAC) Copy all frames.
+AT91C_EMAC_NBC            EQU (0x1 <<  5) ;- (EMAC) No broadcast.
+AT91C_EMAC_MTI            EQU (0x1 <<  6) ;- (EMAC) Multicast hash event enable
+AT91C_EMAC_UNI            EQU (0x1 <<  7) ;- (EMAC) Unicast hash enable.
+AT91C_EMAC_BIG            EQU (0x1 <<  8) ;- (EMAC) Receive 1522 bytes.
+AT91C_EMAC_EAE            EQU (0x1 <<  9) ;- (EMAC) External address match enable.
+AT91C_EMAC_CLK            EQU (0x3 << 10) ;- (EMAC)
+AT91C_EMAC_CLK_HCLK_8     EQU (0x0 << 10) ;- (EMAC) HCLK divided by 8
+AT91C_EMAC_CLK_HCLK_16    EQU (0x1 << 10) ;- (EMAC) HCLK divided by 16
+AT91C_EMAC_CLK_HCLK_32    EQU (0x2 << 10) ;- (EMAC) HCLK divided by 32
+AT91C_EMAC_CLK_HCLK_64    EQU (0x3 << 10) ;- (EMAC) HCLK divided by 64
+AT91C_EMAC_RTY            EQU (0x1 << 12) ;- (EMAC)
+AT91C_EMAC_PAE            EQU (0x1 << 13) ;- (EMAC)
+AT91C_EMAC_RBOF           EQU (0x3 << 14) ;- (EMAC)
+AT91C_EMAC_RBOF_OFFSET_0  EQU (0x0 << 14) ;- (EMAC) no offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_1  EQU (0x1 << 14) ;- (EMAC) one byte offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_2  EQU (0x2 << 14) ;- (EMAC) two bytes offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_3  EQU (0x3 << 14) ;- (EMAC) three bytes offset from start of receive buffer
+AT91C_EMAC_RLCE           EQU (0x1 << 16) ;- (EMAC) Receive Length field Checking Enable
+AT91C_EMAC_DRFCS          EQU (0x1 << 17) ;- (EMAC) Discard Receive FCS
+AT91C_EMAC_EFRHD          EQU (0x1 << 18) ;- (EMAC)
+AT91C_EMAC_IRXFCS         EQU (0x1 << 19) ;- (EMAC) Ignore RX FCS
+// - -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register --------
+AT91C_EMAC_LINKR          EQU (0x1 <<  0) ;- (EMAC)
+AT91C_EMAC_MDIO           EQU (0x1 <<  1) ;- (EMAC)
+AT91C_EMAC_IDLE           EQU (0x1 <<  2) ;- (EMAC)
+// - -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register --------
+AT91C_EMAC_UBR            EQU (0x1 <<  0) ;- (EMAC)
+AT91C_EMAC_COL            EQU (0x1 <<  1) ;- (EMAC)
+AT91C_EMAC_RLES           EQU (0x1 <<  2) ;- (EMAC)
+AT91C_EMAC_TGO            EQU (0x1 <<  3) ;- (EMAC) Transmit Go
+AT91C_EMAC_BEX            EQU (0x1 <<  4) ;- (EMAC) Buffers exhausted mid frame
+AT91C_EMAC_COMP           EQU (0x1 <<  5) ;- (EMAC)
+AT91C_EMAC_UND            EQU (0x1 <<  6) ;- (EMAC)
+// - -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register --------
+AT91C_EMAC_BNA            EQU (0x1 <<  0) ;- (EMAC)
+AT91C_EMAC_REC            EQU (0x1 <<  1) ;- (EMAC)
+AT91C_EMAC_OVR            EQU (0x1 <<  2) ;- (EMAC)
+// - -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register --------
+AT91C_EMAC_MFD            EQU (0x1 <<  0) ;- (EMAC)
+AT91C_EMAC_RCOMP          EQU (0x1 <<  1) ;- (EMAC)
+AT91C_EMAC_RXUBR          EQU (0x1 <<  2) ;- (EMAC)
+AT91C_EMAC_TXUBR          EQU (0x1 <<  3) ;- (EMAC)
+AT91C_EMAC_TUNDR          EQU (0x1 <<  4) ;- (EMAC)
+AT91C_EMAC_RLEX           EQU (0x1 <<  5) ;- (EMAC)
+AT91C_EMAC_TXERR          EQU (0x1 <<  6) ;- (EMAC)
+AT91C_EMAC_TCOMP          EQU (0x1 <<  7) ;- (EMAC)
+AT91C_EMAC_LINK           EQU (0x1 <<  9) ;- (EMAC)
+AT91C_EMAC_ROVR           EQU (0x1 << 10) ;- (EMAC)
+AT91C_EMAC_HRESP          EQU (0x1 << 11) ;- (EMAC)
+AT91C_EMAC_PFRE           EQU (0x1 << 12) ;- (EMAC)
+AT91C_EMAC_PTZ            EQU (0x1 << 13) ;- (EMAC)
+// - -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register --------
+// - -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register --------
+// - -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register --------
+// - -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register --------
+AT91C_EMAC_DATA           EQU (0xFFFF <<  0) ;- (EMAC)
+AT91C_EMAC_CODE           EQU (0x3 << 16) ;- (EMAC)
+AT91C_EMAC_REGA           EQU (0x1F << 18) ;- (EMAC)
+AT91C_EMAC_PHYA           EQU (0x1F << 23) ;- (EMAC)
+AT91C_EMAC_RW             EQU (0x3 << 28) ;- (EMAC)
+AT91C_EMAC_SOF            EQU (0x3 << 30) ;- (EMAC)
+// - -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register --------
+AT91C_EMAC_RMII           EQU (0x1 <<  0) ;- (EMAC) Reduce MII
+AT91C_EMAC_CLKEN          EQU (0x1 <<  1) ;- (EMAC) Clock Enable
+// - -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register --------
+AT91C_EMAC_IP             EQU (0xFFFF <<  0) ;- (EMAC) ARP request IP address
+AT91C_EMAC_MAG            EQU (0x1 << 16) ;- (EMAC) Magic packet event enable
+AT91C_EMAC_ARP            EQU (0x1 << 17) ;- (EMAC) ARP request event enable
+AT91C_EMAC_SA1            EQU (0x1 << 18) ;- (EMAC) Specific address register 1 event enable
+// - -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register --------
+AT91C_EMAC_REVREF         EQU (0xFFFF <<  0) ;- (EMAC)
+AT91C_EMAC_PARTREF        EQU (0xFFFF << 16) ;- (EMAC)
+// - *****************************************************************************
+// -              SOFTWARE API DEFINITION  FOR Analog to Digital Convertor
+// - *****************************************************************************
+// - -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register --------
+AT91C_ADC_SWRST           EQU (0x1 <<  0) ;- (ADC) Software Reset
+AT91C_ADC_START           EQU (0x1 <<  1) ;- (ADC) Start Conversion
+// - -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register --------
+AT91C_ADC_TRGEN           EQU (0x1 <<  0) ;- (ADC) Trigger Enable
+AT91C_ADC_TRGEN_DIS       EQU (0x0) ;- (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
+AT91C_ADC_TRGEN_EN        EQU (0x1) ;- (ADC) Hardware trigger selected by TRGSEL field is enabled.
+AT91C_ADC_TRGSEL          EQU (0x7 <<  1) ;- (ADC) Trigger Selection
+AT91C_ADC_TRGSEL_TIOA0    EQU (0x0 <<  1) ;- (ADC) Selected TRGSEL = TIAO0
+AT91C_ADC_TRGSEL_TIOA1    EQU (0x1 <<  1) ;- (ADC) Selected TRGSEL = TIAO1
+AT91C_ADC_TRGSEL_TIOA2    EQU (0x2 <<  1) ;- (ADC) Selected TRGSEL = TIAO2
+AT91C_ADC_TRGSEL_TIOA3    EQU (0x3 <<  1) ;- (ADC) Selected TRGSEL = TIAO3
+AT91C_ADC_TRGSEL_TIOA4    EQU (0x4 <<  1) ;- (ADC) Selected TRGSEL = TIAO4
+AT91C_ADC_TRGSEL_TIOA5    EQU (0x5 <<  1) ;- (ADC) Selected TRGSEL = TIAO5
+AT91C_ADC_TRGSEL_EXT      EQU (0x6 <<  1) ;- (ADC) Selected TRGSEL = External Trigger
+AT91C_ADC_LOWRES          EQU (0x1 <<  4) ;- (ADC) Resolution.
+AT91C_ADC_LOWRES_10_BIT   EQU (0x0 <<  4) ;- (ADC) 10-bit resolution
+AT91C_ADC_LOWRES_8_BIT    EQU (0x1 <<  4) ;- (ADC) 8-bit resolution
+AT91C_ADC_SLEEP           EQU (0x1 <<  5) ;- (ADC) Sleep Mode
+AT91C_ADC_SLEEP_NORMAL_MODE EQU (0x0 <<  5) ;- (ADC) Normal Mode
+AT91C_ADC_SLEEP_MODE      EQU (0x1 <<  5) ;- (ADC) Sleep Mode
+AT91C_ADC_PRESCAL         EQU (0x3F <<  8) ;- (ADC) Prescaler rate selection
+AT91C_ADC_STARTUP         EQU (0x1F << 16) ;- (ADC) Startup Time
+AT91C_ADC_SHTIM           EQU (0xF << 24) ;- (ADC) Sample & Hold Time
+// - -------- 	ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register --------
+AT91C_ADC_CH0             EQU (0x1 <<  0) ;- (ADC) Channel 0
+AT91C_ADC_CH1             EQU (0x1 <<  1) ;- (ADC) Channel 1
+AT91C_ADC_CH2             EQU (0x1 <<  2) ;- (ADC) Channel 2
+AT91C_ADC_CH3             EQU (0x1 <<  3) ;- (ADC) Channel 3
+AT91C_ADC_CH4             EQU (0x1 <<  4) ;- (ADC) Channel 4
+AT91C_ADC_CH5             EQU (0x1 <<  5) ;- (ADC) Channel 5
+AT91C_ADC_CH6             EQU (0x1 <<  6) ;- (ADC) Channel 6
+AT91C_ADC_CH7             EQU (0x1 <<  7) ;- (ADC) Channel 7
+// - -------- 	ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register --------
+// - -------- 	ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register --------
+// - -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register --------
+AT91C_ADC_EOC0            EQU (0x1 <<  0) ;- (ADC) End of Conversion
+AT91C_ADC_EOC1            EQU (0x1 <<  1) ;- (ADC) End of Conversion
+AT91C_ADC_EOC2            EQU (0x1 <<  2) ;- (ADC) End of Conversion
+AT91C_ADC_EOC3            EQU (0x1 <<  3) ;- (ADC) End of Conversion
+AT91C_ADC_EOC4            EQU (0x1 <<  4) ;- (ADC) End of Conversion
+AT91C_ADC_EOC5            EQU (0x1 <<  5) ;- (ADC) End of Conversion
+AT91C_ADC_EOC6            EQU (0x1 <<  6) ;- (ADC) End of Conversion
+AT91C_ADC_EOC7            EQU (0x1 <<  7) ;- (ADC) End of Conversion
+AT91C_ADC_OVRE0           EQU (0x1 <<  8) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE1           EQU (0x1 <<  9) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE2           EQU (0x1 << 10) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE3           EQU (0x1 << 11) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE4           EQU (0x1 << 12) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE5           EQU (0x1 << 13) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE6           EQU (0x1 << 14) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE7           EQU (0x1 << 15) ;- (ADC) Overrun Error
+AT91C_ADC_DRDY            EQU (0x1 << 16) ;- (ADC) Data Ready
+AT91C_ADC_GOVRE           EQU (0x1 << 17) ;- (ADC) General Overrun
+AT91C_ADC_ENDRX           EQU (0x1 << 18) ;- (ADC) End of Receiver Transfer
+AT91C_ADC_RXBUFF          EQU (0x1 << 19) ;- (ADC) RXBUFF Interrupt
+// - -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register --------
+AT91C_ADC_LDATA           EQU (0x3FF <<  0) ;- (ADC) Last Data Converted
+// - -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register --------
+// - -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register --------
+// - -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register --------
+// - -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 --------
+AT91C_ADC_DATA            EQU (0x3FF <<  0) ;- (ADC) Converted Data
+// - -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 --------
+// - -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 --------
+// - -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 --------
+// - -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 --------
+// - -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 --------
+// - -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 --------
+// - -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 --------
+// - *****************************************************************************
+// -               REGISTER ADDRESS DEFINITION FOR AT91SAM7X256
+// - *****************************************************************************
+// - ========== Register definition for SYS peripheral ==========
+// - ========== Register definition for AIC peripheral ==========
+AT91C_AIC_IVR             EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register
+AT91C_AIC_SMR             EQU (0xFFFFF000) ;- (AIC) Source Mode Register
+AT91C_AIC_FVR             EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register
+AT91C_AIC_DCR             EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect)
+AT91C_AIC_EOICR           EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register
+AT91C_AIC_SVR             EQU (0xFFFFF080) ;- (AIC) Source Vector Register
+AT91C_AIC_FFSR            EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register
+AT91C_AIC_ICCR            EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register
+AT91C_AIC_ISR             EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register
+AT91C_AIC_IMR             EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register
+AT91C_AIC_IPR             EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register
+AT91C_AIC_FFER            EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register
+AT91C_AIC_IECR            EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register
+AT91C_AIC_ISCR            EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register
+AT91C_AIC_FFDR            EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register
+AT91C_AIC_CISR            EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register
+AT91C_AIC_IDCR            EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register
+AT91C_AIC_SPU             EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register
+// - ========== Register definition for PDC_DBGU peripheral ==========
+AT91C_DBGU_TCR            EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register
+AT91C_DBGU_RNPR           EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register
+AT91C_DBGU_TNPR           EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register
+AT91C_DBGU_TPR            EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register
+AT91C_DBGU_RPR            EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register
+AT91C_DBGU_RCR            EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register
+AT91C_DBGU_RNCR           EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register
+AT91C_DBGU_PTCR           EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register
+AT91C_DBGU_PTSR           EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register
+AT91C_DBGU_TNCR           EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register
+// - ========== Register definition for DBGU peripheral ==========
+AT91C_DBGU_EXID           EQU (0xFFFFF244) ;- (DBGU) Chip ID Extension Register
+AT91C_DBGU_BRGR           EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register
+AT91C_DBGU_IDR            EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register
+AT91C_DBGU_CSR            EQU (0xFFFFF214) ;- (DBGU) Channel Status Register
+AT91C_DBGU_CIDR           EQU (0xFFFFF240) ;- (DBGU) Chip ID Register
+AT91C_DBGU_MR             EQU (0xFFFFF204) ;- (DBGU) Mode Register
+AT91C_DBGU_IMR            EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register
+AT91C_DBGU_CR             EQU (0xFFFFF200) ;- (DBGU) Control Register
+AT91C_DBGU_FNTR           EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register
+AT91C_DBGU_THR            EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register
+AT91C_DBGU_RHR            EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register
+AT91C_DBGU_IER            EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register
+// - ========== Register definition for PIOA peripheral ==========
+AT91C_PIOA_ODR            EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr
+AT91C_PIOA_SODR           EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register
+AT91C_PIOA_ISR            EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register
+AT91C_PIOA_ABSR           EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register
+AT91C_PIOA_IER            EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register
+AT91C_PIOA_PPUDR          EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register
+AT91C_PIOA_IMR            EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register
+AT91C_PIOA_PER            EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register
+AT91C_PIOA_IFDR           EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register
+AT91C_PIOA_OWDR           EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register
+AT91C_PIOA_MDSR           EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register
+AT91C_PIOA_IDR            EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register
+AT91C_PIOA_ODSR           EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register
+AT91C_PIOA_PPUSR          EQU (0xFFFFF468) ;- (PIOA) Pull-up Status Register
+AT91C_PIOA_OWSR           EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register
+AT91C_PIOA_BSR            EQU (0xFFFFF474) ;- (PIOA) Select B Register
+AT91C_PIOA_OWER           EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register
+AT91C_PIOA_IFER           EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register
+AT91C_PIOA_PDSR           EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register
+AT91C_PIOA_PPUER          EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register
+AT91C_PIOA_OSR            EQU (0xFFFFF418) ;- (PIOA) Output Status Register
+AT91C_PIOA_ASR            EQU (0xFFFFF470) ;- (PIOA) Select A Register
+AT91C_PIOA_MDDR           EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register
+AT91C_PIOA_CODR           EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register
+AT91C_PIOA_MDER           EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register
+AT91C_PIOA_PDR            EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register
+AT91C_PIOA_IFSR           EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register
+AT91C_PIOA_OER            EQU (0xFFFFF410) ;- (PIOA) Output Enable Register
+AT91C_PIOA_PSR            EQU (0xFFFFF408) ;- (PIOA) PIO Status Register
+// - ========== Register definition for PIOB peripheral ==========
+AT91C_PIOB_OWDR           EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register
+AT91C_PIOB_MDER           EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register
+AT91C_PIOB_PPUSR          EQU (0xFFFFF668) ;- (PIOB) Pull-up Status Register
+AT91C_PIOB_IMR            EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register
+AT91C_PIOB_ASR            EQU (0xFFFFF670) ;- (PIOB) Select A Register
+AT91C_PIOB_PPUDR          EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register
+AT91C_PIOB_PSR            EQU (0xFFFFF608) ;- (PIOB) PIO Status Register
+AT91C_PIOB_IER            EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register
+AT91C_PIOB_CODR           EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register
+AT91C_PIOB_OWER           EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register
+AT91C_PIOB_ABSR           EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register
+AT91C_PIOB_IFDR           EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register
+AT91C_PIOB_PDSR           EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register
+AT91C_PIOB_IDR            EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register
+AT91C_PIOB_OWSR           EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register
+AT91C_PIOB_PDR            EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register
+AT91C_PIOB_ODR            EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr
+AT91C_PIOB_IFSR           EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register
+AT91C_PIOB_PPUER          EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register
+AT91C_PIOB_SODR           EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register
+AT91C_PIOB_ISR            EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register
+AT91C_PIOB_ODSR           EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register
+AT91C_PIOB_OSR            EQU (0xFFFFF618) ;- (PIOB) Output Status Register
+AT91C_PIOB_MDSR           EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register
+AT91C_PIOB_IFER           EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register
+AT91C_PIOB_BSR            EQU (0xFFFFF674) ;- (PIOB) Select B Register
+AT91C_PIOB_MDDR           EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register
+AT91C_PIOB_OER            EQU (0xFFFFF610) ;- (PIOB) Output Enable Register
+AT91C_PIOB_PER            EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register
+// - ========== Register definition for CKGR peripheral ==========
+AT91C_CKGR_MOR            EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register
+AT91C_CKGR_PLLR           EQU (0xFFFFFC2C) ;- (CKGR) PLL Register
+AT91C_CKGR_MCFR           EQU (0xFFFFFC24) ;- (CKGR) Main Clock  Frequency Register
+// - ========== Register definition for PMC peripheral ==========
+AT91C_PMC_IDR             EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register
+AT91C_PMC_MOR             EQU (0xFFFFFC20) ;- (PMC) Main Oscillator Register
+AT91C_PMC_PLLR            EQU (0xFFFFFC2C) ;- (PMC) PLL Register
+AT91C_PMC_PCER            EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register
+AT91C_PMC_PCKR            EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register
+AT91C_PMC_MCKR            EQU (0xFFFFFC30) ;- (PMC) Master Clock Register
+AT91C_PMC_SCDR            EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register
+AT91C_PMC_PCDR            EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register
+AT91C_PMC_SCSR            EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register
+AT91C_PMC_PCSR            EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register
+AT91C_PMC_MCFR            EQU (0xFFFFFC24) ;- (PMC) Main Clock  Frequency Register
+AT91C_PMC_SCER            EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register
+AT91C_PMC_IMR             EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register
+AT91C_PMC_IER             EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register
+AT91C_PMC_SR              EQU (0xFFFFFC68) ;- (PMC) Status Register
+// - ========== Register definition for RSTC peripheral ==========
+AT91C_RSTC_RCR            EQU (0xFFFFFD00) ;- (RSTC) Reset Control Register
+AT91C_RSTC_RMR            EQU (0xFFFFFD08) ;- (RSTC) Reset Mode Register
+AT91C_RSTC_RSR            EQU (0xFFFFFD04) ;- (RSTC) Reset Status Register
+// - ========== Register definition for RTTC peripheral ==========
+AT91C_RTTC_RTSR           EQU (0xFFFFFD2C) ;- (RTTC) Real-time Status Register
+AT91C_RTTC_RTMR           EQU (0xFFFFFD20) ;- (RTTC) Real-time Mode Register
+AT91C_RTTC_RTVR           EQU (0xFFFFFD28) ;- (RTTC) Real-time Value Register
+AT91C_RTTC_RTAR           EQU (0xFFFFFD24) ;- (RTTC) Real-time Alarm Register
+// - ========== Register definition for PITC peripheral ==========
+AT91C_PITC_PIVR           EQU (0xFFFFFD38) ;- (PITC) Period Interval Value Register
+AT91C_PITC_PISR           EQU (0xFFFFFD34) ;- (PITC) Period Interval Status Register
+AT91C_PITC_PIIR           EQU (0xFFFFFD3C) ;- (PITC) Period Interval Image Register
+AT91C_PITC_PIMR           EQU (0xFFFFFD30) ;- (PITC) Period Interval Mode Register
+// - ========== Register definition for WDTC peripheral ==========
+AT91C_WDTC_WDCR           EQU (0xFFFFFD40) ;- (WDTC) Watchdog Control Register
+AT91C_WDTC_WDSR           EQU (0xFFFFFD48) ;- (WDTC) Watchdog Status Register
+AT91C_WDTC_WDMR           EQU (0xFFFFFD44) ;- (WDTC) Watchdog Mode Register
+// - ========== Register definition for VREG peripheral ==========
+AT91C_VREG_MR             EQU (0xFFFFFD60) ;- (VREG) Voltage Regulator Mode Register
+// - ========== Register definition for MC peripheral ==========
+AT91C_MC_ASR              EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register
+AT91C_MC_RCR              EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register
+AT91C_MC_FCR              EQU (0xFFFFFF64) ;- (MC) MC Flash Command Register
+AT91C_MC_AASR             EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register
+AT91C_MC_FSR              EQU (0xFFFFFF68) ;- (MC) MC Flash Status Register
+AT91C_MC_FMR              EQU (0xFFFFFF60) ;- (MC) MC Flash Mode Register
+// - ========== Register definition for PDC_SPI1 peripheral ==========
+AT91C_SPI1_PTCR           EQU (0xFFFE4120) ;- (PDC_SPI1) PDC Transfer Control Register
+AT91C_SPI1_RPR            EQU (0xFFFE4100) ;- (PDC_SPI1) Receive Pointer Register
+AT91C_SPI1_TNCR           EQU (0xFFFE411C) ;- (PDC_SPI1) Transmit Next Counter Register
+AT91C_SPI1_TPR            EQU (0xFFFE4108) ;- (PDC_SPI1) Transmit Pointer Register
+AT91C_SPI1_TNPR           EQU (0xFFFE4118) ;- (PDC_SPI1) Transmit Next Pointer Register
+AT91C_SPI1_TCR            EQU (0xFFFE410C) ;- (PDC_SPI1) Transmit Counter Register
+AT91C_SPI1_RCR            EQU (0xFFFE4104) ;- (PDC_SPI1) Receive Counter Register
+AT91C_SPI1_RNPR           EQU (0xFFFE4110) ;- (PDC_SPI1) Receive Next Pointer Register
+AT91C_SPI1_RNCR           EQU (0xFFFE4114) ;- (PDC_SPI1) Receive Next Counter Register
+AT91C_SPI1_PTSR           EQU (0xFFFE4124) ;- (PDC_SPI1) PDC Transfer Status Register
+// - ========== Register definition for SPI1 peripheral ==========
+AT91C_SPI1_IMR            EQU (0xFFFE401C) ;- (SPI1) Interrupt Mask Register
+AT91C_SPI1_IER            EQU (0xFFFE4014) ;- (SPI1) Interrupt Enable Register
+AT91C_SPI1_MR             EQU (0xFFFE4004) ;- (SPI1) Mode Register
+AT91C_SPI1_RDR            EQU (0xFFFE4008) ;- (SPI1) Receive Data Register
+AT91C_SPI1_IDR            EQU (0xFFFE4018) ;- (SPI1) Interrupt Disable Register
+AT91C_SPI1_SR             EQU (0xFFFE4010) ;- (SPI1) Status Register
+AT91C_SPI1_TDR            EQU (0xFFFE400C) ;- (SPI1) Transmit Data Register
+AT91C_SPI1_CR             EQU (0xFFFE4000) ;- (SPI1) Control Register
+AT91C_SPI1_CSR            EQU (0xFFFE4030) ;- (SPI1) Chip Select Register
+// - ========== Register definition for PDC_SPI0 peripheral ==========
+AT91C_SPI0_PTCR           EQU (0xFFFE0120) ;- (PDC_SPI0) PDC Transfer Control Register
+AT91C_SPI0_TPR            EQU (0xFFFE0108) ;- (PDC_SPI0) Transmit Pointer Register
+AT91C_SPI0_TCR            EQU (0xFFFE010C) ;- (PDC_SPI0) Transmit Counter Register
+AT91C_SPI0_RCR            EQU (0xFFFE0104) ;- (PDC_SPI0) Receive Counter Register
+AT91C_SPI0_PTSR           EQU (0xFFFE0124) ;- (PDC_SPI0) PDC Transfer Status Register
+AT91C_SPI0_RNPR           EQU (0xFFFE0110) ;- (PDC_SPI0) Receive Next Pointer Register
+AT91C_SPI0_RPR            EQU (0xFFFE0100) ;- (PDC_SPI0) Receive Pointer Register
+AT91C_SPI0_TNCR           EQU (0xFFFE011C) ;- (PDC_SPI0) Transmit Next Counter Register
+AT91C_SPI0_RNCR           EQU (0xFFFE0114) ;- (PDC_SPI0) Receive Next Counter Register
+AT91C_SPI0_TNPR           EQU (0xFFFE0118) ;- (PDC_SPI0) Transmit Next Pointer Register
+// - ========== Register definition for SPI0 peripheral ==========
+AT91C_SPI0_IER            EQU (0xFFFE0014) ;- (SPI0) Interrupt Enable Register
+AT91C_SPI0_SR             EQU (0xFFFE0010) ;- (SPI0) Status Register
+AT91C_SPI0_IDR            EQU (0xFFFE0018) ;- (SPI0) Interrupt Disable Register
+AT91C_SPI0_CR             EQU (0xFFFE0000) ;- (SPI0) Control Register
+AT91C_SPI0_MR             EQU (0xFFFE0004) ;- (SPI0) Mode Register
+AT91C_SPI0_IMR            EQU (0xFFFE001C) ;- (SPI0) Interrupt Mask Register
+AT91C_SPI0_TDR            EQU (0xFFFE000C) ;- (SPI0) Transmit Data Register
+AT91C_SPI0_RDR            EQU (0xFFFE0008) ;- (SPI0) Receive Data Register
+AT91C_SPI0_CSR            EQU (0xFFFE0030) ;- (SPI0) Chip Select Register
+// - ========== Register definition for PDC_US1 peripheral ==========
+AT91C_US1_RNCR            EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register
+AT91C_US1_PTCR            EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register
+AT91C_US1_TCR             EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register
+AT91C_US1_PTSR            EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register
+AT91C_US1_TNPR            EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register
+AT91C_US1_RCR             EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register
+AT91C_US1_RNPR            EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register
+AT91C_US1_RPR             EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register
+AT91C_US1_TNCR            EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register
+AT91C_US1_TPR             EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register
+// - ========== Register definition for US1 peripheral ==========
+AT91C_US1_IF              EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register
+AT91C_US1_NER             EQU (0xFFFC4044) ;- (US1) Nb Errors Register
+AT91C_US1_RTOR            EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register
+AT91C_US1_CSR             EQU (0xFFFC4014) ;- (US1) Channel Status Register
+AT91C_US1_IDR             EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register
+AT91C_US1_IER             EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register
+AT91C_US1_THR             EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register
+AT91C_US1_TTGR            EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register
+AT91C_US1_RHR             EQU (0xFFFC4018) ;- (US1) Receiver Holding Register
+AT91C_US1_BRGR            EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register
+AT91C_US1_IMR             EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register
+AT91C_US1_FIDI            EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register
+AT91C_US1_CR              EQU (0xFFFC4000) ;- (US1) Control Register
+AT91C_US1_MR              EQU (0xFFFC4004) ;- (US1) Mode Register
+// - ========== Register definition for PDC_US0 peripheral ==========
+AT91C_US0_TNPR            EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register
+AT91C_US0_RNPR            EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register
+AT91C_US0_TCR             EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register
+AT91C_US0_PTCR            EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register
+AT91C_US0_PTSR            EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register
+AT91C_US0_TNCR            EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register
+AT91C_US0_TPR             EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register
+AT91C_US0_RCR             EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register
+AT91C_US0_RPR             EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register
+AT91C_US0_RNCR            EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register
+// - ========== Register definition for US0 peripheral ==========
+AT91C_US0_BRGR            EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register
+AT91C_US0_NER             EQU (0xFFFC0044) ;- (US0) Nb Errors Register
+AT91C_US0_CR              EQU (0xFFFC0000) ;- (US0) Control Register
+AT91C_US0_IMR             EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register
+AT91C_US0_FIDI            EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register
+AT91C_US0_TTGR            EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register
+AT91C_US0_MR              EQU (0xFFFC0004) ;- (US0) Mode Register
+AT91C_US0_RTOR            EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register
+AT91C_US0_CSR             EQU (0xFFFC0014) ;- (US0) Channel Status Register
+AT91C_US0_RHR             EQU (0xFFFC0018) ;- (US0) Receiver Holding Register
+AT91C_US0_IDR             EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register
+AT91C_US0_THR             EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register
+AT91C_US0_IF              EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register
+AT91C_US0_IER             EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register
+// - ========== Register definition for PDC_SSC peripheral ==========
+AT91C_SSC_TNCR            EQU (0xFFFD411C) ;- (PDC_SSC) Transmit Next Counter Register
+AT91C_SSC_RPR             EQU (0xFFFD4100) ;- (PDC_SSC) Receive Pointer Register
+AT91C_SSC_RNCR            EQU (0xFFFD4114) ;- (PDC_SSC) Receive Next Counter Register
+AT91C_SSC_TPR             EQU (0xFFFD4108) ;- (PDC_SSC) Transmit Pointer Register
+AT91C_SSC_PTCR            EQU (0xFFFD4120) ;- (PDC_SSC) PDC Transfer Control Register
+AT91C_SSC_TCR             EQU (0xFFFD410C) ;- (PDC_SSC) Transmit Counter Register
+AT91C_SSC_RCR             EQU (0xFFFD4104) ;- (PDC_SSC) Receive Counter Register
+AT91C_SSC_RNPR            EQU (0xFFFD4110) ;- (PDC_SSC) Receive Next Pointer Register
+AT91C_SSC_TNPR            EQU (0xFFFD4118) ;- (PDC_SSC) Transmit Next Pointer Register
+AT91C_SSC_PTSR            EQU (0xFFFD4124) ;- (PDC_SSC) PDC Transfer Status Register
+// - ========== Register definition for SSC peripheral ==========
+AT91C_SSC_RHR             EQU (0xFFFD4020) ;- (SSC) Receive Holding Register
+AT91C_SSC_RSHR            EQU (0xFFFD4030) ;- (SSC) Receive Sync Holding Register
+AT91C_SSC_TFMR            EQU (0xFFFD401C) ;- (SSC) Transmit Frame Mode Register
+AT91C_SSC_IDR             EQU (0xFFFD4048) ;- (SSC) Interrupt Disable Register
+AT91C_SSC_THR             EQU (0xFFFD4024) ;- (SSC) Transmit Holding Register
+AT91C_SSC_RCMR            EQU (0xFFFD4010) ;- (SSC) Receive Clock ModeRegister
+AT91C_SSC_IER             EQU (0xFFFD4044) ;- (SSC) Interrupt Enable Register
+AT91C_SSC_TSHR            EQU (0xFFFD4034) ;- (SSC) Transmit Sync Holding Register
+AT91C_SSC_SR              EQU (0xFFFD4040) ;- (SSC) Status Register
+AT91C_SSC_CMR             EQU (0xFFFD4004) ;- (SSC) Clock Mode Register
+AT91C_SSC_TCMR            EQU (0xFFFD4018) ;- (SSC) Transmit Clock Mode Register
+AT91C_SSC_CR              EQU (0xFFFD4000) ;- (SSC) Control Register
+AT91C_SSC_IMR             EQU (0xFFFD404C) ;- (SSC) Interrupt Mask Register
+AT91C_SSC_RFMR            EQU (0xFFFD4014) ;- (SSC) Receive Frame Mode Register
+// - ========== Register definition for TWI peripheral ==========
+AT91C_TWI_IER             EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register
+AT91C_TWI_CR              EQU (0xFFFB8000) ;- (TWI) Control Register
+AT91C_TWI_SR              EQU (0xFFFB8020) ;- (TWI) Status Register
+AT91C_TWI_IMR             EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register
+AT91C_TWI_THR             EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register
+AT91C_TWI_IDR             EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register
+AT91C_TWI_IADR            EQU (0xFFFB800C) ;- (TWI) Internal Address Register
+AT91C_TWI_MMR             EQU (0xFFFB8004) ;- (TWI) Master Mode Register
+AT91C_TWI_CWGR            EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register
+AT91C_TWI_RHR             EQU (0xFFFB8030) ;- (TWI) Receive Holding Register
+// - ========== Register definition for PWMC_CH3 peripheral ==========
+AT91C_PWMC_CH3_CUPDR      EQU (0xFFFCC270) ;- (PWMC_CH3) Channel Update Register
+AT91C_PWMC_CH3_Reserved   EQU (0xFFFCC274) ;- (PWMC_CH3) Reserved
+AT91C_PWMC_CH3_CPRDR      EQU (0xFFFCC268) ;- (PWMC_CH3) Channel Period Register
+AT91C_PWMC_CH3_CDTYR      EQU (0xFFFCC264) ;- (PWMC_CH3) Channel Duty Cycle Register
+AT91C_PWMC_CH3_CCNTR      EQU (0xFFFCC26C) ;- (PWMC_CH3) Channel Counter Register
+AT91C_PWMC_CH3_CMR        EQU (0xFFFCC260) ;- (PWMC_CH3) Channel Mode Register
+// - ========== Register definition for PWMC_CH2 peripheral ==========
+AT91C_PWMC_CH2_Reserved   EQU (0xFFFCC254) ;- (PWMC_CH2) Reserved
+AT91C_PWMC_CH2_CMR        EQU (0xFFFCC240) ;- (PWMC_CH2) Channel Mode Register
+AT91C_PWMC_CH2_CCNTR      EQU (0xFFFCC24C) ;- (PWMC_CH2) Channel Counter Register
+AT91C_PWMC_CH2_CPRDR      EQU (0xFFFCC248) ;- (PWMC_CH2) Channel Period Register
+AT91C_PWMC_CH2_CUPDR      EQU (0xFFFCC250) ;- (PWMC_CH2) Channel Update Register
+AT91C_PWMC_CH2_CDTYR      EQU (0xFFFCC244) ;- (PWMC_CH2) Channel Duty Cycle Register
+// - ========== Register definition for PWMC_CH1 peripheral ==========
+AT91C_PWMC_CH1_Reserved   EQU (0xFFFCC234) ;- (PWMC_CH1) Reserved
+AT91C_PWMC_CH1_CUPDR      EQU (0xFFFCC230) ;- (PWMC_CH1) Channel Update Register
+AT91C_PWMC_CH1_CPRDR      EQU (0xFFFCC228) ;- (PWMC_CH1) Channel Period Register
+AT91C_PWMC_CH1_CCNTR      EQU (0xFFFCC22C) ;- (PWMC_CH1) Channel Counter Register
+AT91C_PWMC_CH1_CDTYR      EQU (0xFFFCC224) ;- (PWMC_CH1) Channel Duty Cycle Register
+AT91C_PWMC_CH1_CMR        EQU (0xFFFCC220) ;- (PWMC_CH1) Channel Mode Register
+// - ========== Register definition for PWMC_CH0 peripheral ==========
+AT91C_PWMC_CH0_Reserved   EQU (0xFFFCC214) ;- (PWMC_CH0) Reserved
+AT91C_PWMC_CH0_CPRDR      EQU (0xFFFCC208) ;- (PWMC_CH0) Channel Period Register
+AT91C_PWMC_CH0_CDTYR      EQU (0xFFFCC204) ;- (PWMC_CH0) Channel Duty Cycle Register
+AT91C_PWMC_CH0_CMR        EQU (0xFFFCC200) ;- (PWMC_CH0) Channel Mode Register
+AT91C_PWMC_CH0_CUPDR      EQU (0xFFFCC210) ;- (PWMC_CH0) Channel Update Register
+AT91C_PWMC_CH0_CCNTR      EQU (0xFFFCC20C) ;- (PWMC_CH0) Channel Counter Register
+// - ========== Register definition for PWMC peripheral ==========
+AT91C_PWMC_IDR            EQU (0xFFFCC014) ;- (PWMC) PWMC Interrupt Disable Register
+AT91C_PWMC_DIS            EQU (0xFFFCC008) ;- (PWMC) PWMC Disable Register
+AT91C_PWMC_IER            EQU (0xFFFCC010) ;- (PWMC) PWMC Interrupt Enable Register
+AT91C_PWMC_VR             EQU (0xFFFCC0FC) ;- (PWMC) PWMC Version Register
+AT91C_PWMC_ISR            EQU (0xFFFCC01C) ;- (PWMC) PWMC Interrupt Status Register
+AT91C_PWMC_SR             EQU (0xFFFCC00C) ;- (PWMC) PWMC Status Register
+AT91C_PWMC_IMR            EQU (0xFFFCC018) ;- (PWMC) PWMC Interrupt Mask Register
+AT91C_PWMC_MR             EQU (0xFFFCC000) ;- (PWMC) PWMC Mode Register
+AT91C_PWMC_ENA            EQU (0xFFFCC004) ;- (PWMC) PWMC Enable Register
+// - ========== Register definition for UDP peripheral ==========
+AT91C_UDP_IMR             EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register
+AT91C_UDP_FADDR           EQU (0xFFFB0008) ;- (UDP) Function Address Register
+AT91C_UDP_NUM             EQU (0xFFFB0000) ;- (UDP) Frame Number Register
+AT91C_UDP_FDR             EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register
+AT91C_UDP_ISR             EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register
+AT91C_UDP_CSR             EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register
+AT91C_UDP_IDR             EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register
+AT91C_UDP_ICR             EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register
+AT91C_UDP_RSTEP           EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register
+AT91C_UDP_TXVC            EQU (0xFFFB0074) ;- (UDP) Transceiver Control Register
+AT91C_UDP_GLBSTATE        EQU (0xFFFB0004) ;- (UDP) Global State Register
+AT91C_UDP_IER             EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register
+// - ========== Register definition for TC0 peripheral ==========
+AT91C_TC0_SR              EQU (0xFFFA0020) ;- (TC0) Status Register
+AT91C_TC0_RC              EQU (0xFFFA001C) ;- (TC0) Register C
+AT91C_TC0_RB              EQU (0xFFFA0018) ;- (TC0) Register B
+AT91C_TC0_CCR             EQU (0xFFFA0000) ;- (TC0) Channel Control Register
+AT91C_TC0_CMR             EQU (0xFFFA0004) ;- (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC0_IER             EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register
+AT91C_TC0_RA              EQU (0xFFFA0014) ;- (TC0) Register A
+AT91C_TC0_IDR             EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register
+AT91C_TC0_CV              EQU (0xFFFA0010) ;- (TC0) Counter Value
+AT91C_TC0_IMR             EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register
+// - ========== Register definition for TC1 peripheral ==========
+AT91C_TC1_RB              EQU (0xFFFA0058) ;- (TC1) Register B
+AT91C_TC1_CCR             EQU (0xFFFA0040) ;- (TC1) Channel Control Register
+AT91C_TC1_IER             EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register
+AT91C_TC1_IDR             EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register
+AT91C_TC1_SR              EQU (0xFFFA0060) ;- (TC1) Status Register
+AT91C_TC1_CMR             EQU (0xFFFA0044) ;- (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC1_RA              EQU (0xFFFA0054) ;- (TC1) Register A
+AT91C_TC1_RC              EQU (0xFFFA005C) ;- (TC1) Register C
+AT91C_TC1_IMR             EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register
+AT91C_TC1_CV              EQU (0xFFFA0050) ;- (TC1) Counter Value
+// - ========== Register definition for TC2 peripheral ==========
+AT91C_TC2_CMR             EQU (0xFFFA0084) ;- (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC2_CCR             EQU (0xFFFA0080) ;- (TC2) Channel Control Register
+AT91C_TC2_CV              EQU (0xFFFA0090) ;- (TC2) Counter Value
+AT91C_TC2_RA              EQU (0xFFFA0094) ;- (TC2) Register A
+AT91C_TC2_RB              EQU (0xFFFA0098) ;- (TC2) Register B
+AT91C_TC2_IDR             EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register
+AT91C_TC2_IMR             EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register
+AT91C_TC2_RC              EQU (0xFFFA009C) ;- (TC2) Register C
+AT91C_TC2_IER             EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register
+AT91C_TC2_SR              EQU (0xFFFA00A0) ;- (TC2) Status Register
+// - ========== Register definition for TCB peripheral ==========
+AT91C_TCB_BMR             EQU (0xFFFA00C4) ;- (TCB) TC Block Mode Register
+AT91C_TCB_BCR             EQU (0xFFFA00C0) ;- (TCB) TC Block Control Register
+// - ========== Register definition for CAN_MB0 peripheral ==========
+AT91C_CAN_MB0_MDL         EQU (0xFFFD0214) ;- (CAN_MB0) MailBox Data Low Register
+AT91C_CAN_MB0_MAM         EQU (0xFFFD0204) ;- (CAN_MB0) MailBox Acceptance Mask Register
+AT91C_CAN_MB0_MCR         EQU (0xFFFD021C) ;- (CAN_MB0) MailBox Control Register
+AT91C_CAN_MB0_MID         EQU (0xFFFD0208) ;- (CAN_MB0) MailBox ID Register
+AT91C_CAN_MB0_MSR         EQU (0xFFFD0210) ;- (CAN_MB0) MailBox Status Register
+AT91C_CAN_MB0_MFID        EQU (0xFFFD020C) ;- (CAN_MB0) MailBox Family ID Register
+AT91C_CAN_MB0_MDH         EQU (0xFFFD0218) ;- (CAN_MB0) MailBox Data High Register
+AT91C_CAN_MB0_MMR         EQU (0xFFFD0200) ;- (CAN_MB0) MailBox Mode Register
+// - ========== Register definition for CAN_MB1 peripheral ==========
+AT91C_CAN_MB1_MDL         EQU (0xFFFD0234) ;- (CAN_MB1) MailBox Data Low Register
+AT91C_CAN_MB1_MID         EQU (0xFFFD0228) ;- (CAN_MB1) MailBox ID Register
+AT91C_CAN_MB1_MMR         EQU (0xFFFD0220) ;- (CAN_MB1) MailBox Mode Register
+AT91C_CAN_MB1_MSR         EQU (0xFFFD0230) ;- (CAN_MB1) MailBox Status Register
+AT91C_CAN_MB1_MAM         EQU (0xFFFD0224) ;- (CAN_MB1) MailBox Acceptance Mask Register
+AT91C_CAN_MB1_MDH         EQU (0xFFFD0238) ;- (CAN_MB1) MailBox Data High Register
+AT91C_CAN_MB1_MCR         EQU (0xFFFD023C) ;- (CAN_MB1) MailBox Control Register
+AT91C_CAN_MB1_MFID        EQU (0xFFFD022C) ;- (CAN_MB1) MailBox Family ID Register
+// - ========== Register definition for CAN_MB2 peripheral ==========
+AT91C_CAN_MB2_MCR         EQU (0xFFFD025C) ;- (CAN_MB2) MailBox Control Register
+AT91C_CAN_MB2_MDH         EQU (0xFFFD0258) ;- (CAN_MB2) MailBox Data High Register
+AT91C_CAN_MB2_MID         EQU (0xFFFD0248) ;- (CAN_MB2) MailBox ID Register
+AT91C_CAN_MB2_MDL         EQU (0xFFFD0254) ;- (CAN_MB2) MailBox Data Low Register
+AT91C_CAN_MB2_MMR         EQU (0xFFFD0240) ;- (CAN_MB2) MailBox Mode Register
+AT91C_CAN_MB2_MAM         EQU (0xFFFD0244) ;- (CAN_MB2) MailBox Acceptance Mask Register
+AT91C_CAN_MB2_MFID        EQU (0xFFFD024C) ;- (CAN_MB2) MailBox Family ID Register
+AT91C_CAN_MB2_MSR         EQU (0xFFFD0250) ;- (CAN_MB2) MailBox Status Register
+// - ========== Register definition for CAN_MB3 peripheral ==========
+AT91C_CAN_MB3_MFID        EQU (0xFFFD026C) ;- (CAN_MB3) MailBox Family ID Register
+AT91C_CAN_MB3_MAM         EQU (0xFFFD0264) ;- (CAN_MB3) MailBox Acceptance Mask Register
+AT91C_CAN_MB3_MID         EQU (0xFFFD0268) ;- (CAN_MB3) MailBox ID Register
+AT91C_CAN_MB3_MCR         EQU (0xFFFD027C) ;- (CAN_MB3) MailBox Control Register
+AT91C_CAN_MB3_MMR         EQU (0xFFFD0260) ;- (CAN_MB3) MailBox Mode Register
+AT91C_CAN_MB3_MSR         EQU (0xFFFD0270) ;- (CAN_MB3) MailBox Status Register
+AT91C_CAN_MB3_MDL         EQU (0xFFFD0274) ;- (CAN_MB3) MailBox Data Low Register
+AT91C_CAN_MB3_MDH         EQU (0xFFFD0278) ;- (CAN_MB3) MailBox Data High Register
+// - ========== Register definition for CAN_MB4 peripheral ==========
+AT91C_CAN_MB4_MID         EQU (0xFFFD0288) ;- (CAN_MB4) MailBox ID Register
+AT91C_CAN_MB4_MMR         EQU (0xFFFD0280) ;- (CAN_MB4) MailBox Mode Register
+AT91C_CAN_MB4_MDH         EQU (0xFFFD0298) ;- (CAN_MB4) MailBox Data High Register
+AT91C_CAN_MB4_MFID        EQU (0xFFFD028C) ;- (CAN_MB4) MailBox Family ID Register
+AT91C_CAN_MB4_MSR         EQU (0xFFFD0290) ;- (CAN_MB4) MailBox Status Register
+AT91C_CAN_MB4_MCR         EQU (0xFFFD029C) ;- (CAN_MB4) MailBox Control Register
+AT91C_CAN_MB4_MDL         EQU (0xFFFD0294) ;- (CAN_MB4) MailBox Data Low Register
+AT91C_CAN_MB4_MAM         EQU (0xFFFD0284) ;- (CAN_MB4) MailBox Acceptance Mask Register
+// - ========== Register definition for CAN_MB5 peripheral ==========
+AT91C_CAN_MB5_MSR         EQU (0xFFFD02B0) ;- (CAN_MB5) MailBox Status Register
+AT91C_CAN_MB5_MCR         EQU (0xFFFD02BC) ;- (CAN_MB5) MailBox Control Register
+AT91C_CAN_MB5_MFID        EQU (0xFFFD02AC) ;- (CAN_MB5) MailBox Family ID Register
+AT91C_CAN_MB5_MDH         EQU (0xFFFD02B8) ;- (CAN_MB5) MailBox Data High Register
+AT91C_CAN_MB5_MID         EQU (0xFFFD02A8) ;- (CAN_MB5) MailBox ID Register
+AT91C_CAN_MB5_MMR         EQU (0xFFFD02A0) ;- (CAN_MB5) MailBox Mode Register
+AT91C_CAN_MB5_MDL         EQU (0xFFFD02B4) ;- (CAN_MB5) MailBox Data Low Register
+AT91C_CAN_MB5_MAM         EQU (0xFFFD02A4) ;- (CAN_MB5) MailBox Acceptance Mask Register
+// - ========== Register definition for CAN_MB6 peripheral ==========
+AT91C_CAN_MB6_MFID        EQU (0xFFFD02CC) ;- (CAN_MB6) MailBox Family ID Register
+AT91C_CAN_MB6_MID         EQU (0xFFFD02C8) ;- (CAN_MB6) MailBox ID Register
+AT91C_CAN_MB6_MAM         EQU (0xFFFD02C4) ;- (CAN_MB6) MailBox Acceptance Mask Register
+AT91C_CAN_MB6_MSR         EQU (0xFFFD02D0) ;- (CAN_MB6) MailBox Status Register
+AT91C_CAN_MB6_MDL         EQU (0xFFFD02D4) ;- (CAN_MB6) MailBox Data Low Register
+AT91C_CAN_MB6_MCR         EQU (0xFFFD02DC) ;- (CAN_MB6) MailBox Control Register
+AT91C_CAN_MB6_MDH         EQU (0xFFFD02D8) ;- (CAN_MB6) MailBox Data High Register
+AT91C_CAN_MB6_MMR         EQU (0xFFFD02C0) ;- (CAN_MB6) MailBox Mode Register
+// - ========== Register definition for CAN_MB7 peripheral ==========
+AT91C_CAN_MB7_MCR         EQU (0xFFFD02FC) ;- (CAN_MB7) MailBox Control Register
+AT91C_CAN_MB7_MDH         EQU (0xFFFD02F8) ;- (CAN_MB7) MailBox Data High Register
+AT91C_CAN_MB7_MFID        EQU (0xFFFD02EC) ;- (CAN_MB7) MailBox Family ID Register
+AT91C_CAN_MB7_MDL         EQU (0xFFFD02F4) ;- (CAN_MB7) MailBox Data Low Register
+AT91C_CAN_MB7_MID         EQU (0xFFFD02E8) ;- (CAN_MB7) MailBox ID Register
+AT91C_CAN_MB7_MMR         EQU (0xFFFD02E0) ;- (CAN_MB7) MailBox Mode Register
+AT91C_CAN_MB7_MAM         EQU (0xFFFD02E4) ;- (CAN_MB7) MailBox Acceptance Mask Register
+AT91C_CAN_MB7_MSR         EQU (0xFFFD02F0) ;- (CAN_MB7) MailBox Status Register
+// - ========== Register definition for CAN peripheral ==========
+AT91C_CAN_TCR             EQU (0xFFFD0024) ;- (CAN) Transfer Command Register
+AT91C_CAN_IMR             EQU (0xFFFD000C) ;- (CAN) Interrupt Mask Register
+AT91C_CAN_IER             EQU (0xFFFD0004) ;- (CAN) Interrupt Enable Register
+AT91C_CAN_ECR             EQU (0xFFFD0020) ;- (CAN) Error Counter Register
+AT91C_CAN_TIMESTP         EQU (0xFFFD001C) ;- (CAN) Time Stamp Register
+AT91C_CAN_MR              EQU (0xFFFD0000) ;- (CAN) Mode Register
+AT91C_CAN_IDR             EQU (0xFFFD0008) ;- (CAN) Interrupt Disable Register
+AT91C_CAN_ACR             EQU (0xFFFD0028) ;- (CAN) Abort Command Register
+AT91C_CAN_TIM             EQU (0xFFFD0018) ;- (CAN) Timer Register
+AT91C_CAN_SR              EQU (0xFFFD0010) ;- (CAN) Status Register
+AT91C_CAN_BR              EQU (0xFFFD0014) ;- (CAN) Baudrate Register
+AT91C_CAN_VR              EQU (0xFFFD00FC) ;- (CAN) Version Register
+// - ========== Register definition for EMAC peripheral ==========
+AT91C_EMAC_ISR            EQU (0xFFFDC024) ;- (EMAC) Interrupt Status Register
+AT91C_EMAC_SA4H           EQU (0xFFFDC0B4) ;- (EMAC) Specific Address 4 Top, Last 2 bytes
+AT91C_EMAC_SA1L           EQU (0xFFFDC098) ;- (EMAC) Specific Address 1 Bottom, First 4 bytes
+AT91C_EMAC_ELE            EQU (0xFFFDC078) ;- (EMAC) Excessive Length Errors Register
+AT91C_EMAC_LCOL           EQU (0xFFFDC05C) ;- (EMAC) Late Collision Register
+AT91C_EMAC_RLE            EQU (0xFFFDC088) ;- (EMAC) Receive Length Field Mismatch Register
+AT91C_EMAC_WOL            EQU (0xFFFDC0C4) ;- (EMAC) Wake On LAN Register
+AT91C_EMAC_DTF            EQU (0xFFFDC058) ;- (EMAC) Deferred Transmission Frame Register
+AT91C_EMAC_TUND           EQU (0xFFFDC064) ;- (EMAC) Transmit Underrun Error Register
+AT91C_EMAC_NCR            EQU (0xFFFDC000) ;- (EMAC) Network Control Register
+AT91C_EMAC_SA4L           EQU (0xFFFDC0B0) ;- (EMAC) Specific Address 4 Bottom, First 4 bytes
+AT91C_EMAC_RSR            EQU (0xFFFDC020) ;- (EMAC) Receive Status Register
+AT91C_EMAC_SA3L           EQU (0xFFFDC0A8) ;- (EMAC) Specific Address 3 Bottom, First 4 bytes
+AT91C_EMAC_TSR            EQU (0xFFFDC014) ;- (EMAC) Transmit Status Register
+AT91C_EMAC_IDR            EQU (0xFFFDC02C) ;- (EMAC) Interrupt Disable Register
+AT91C_EMAC_RSE            EQU (0xFFFDC074) ;- (EMAC) Receive Symbol Errors Register
+AT91C_EMAC_ECOL           EQU (0xFFFDC060) ;- (EMAC) Excessive Collision Register
+AT91C_EMAC_TID            EQU (0xFFFDC0B8) ;- (EMAC) Type ID Checking Register
+AT91C_EMAC_HRB            EQU (0xFFFDC090) ;- (EMAC) Hash Address Bottom[31:0]
+AT91C_EMAC_TBQP           EQU (0xFFFDC01C) ;- (EMAC) Transmit Buffer Queue Pointer
+AT91C_EMAC_USRIO          EQU (0xFFFDC0C0) ;- (EMAC) USER Input/Output Register
+AT91C_EMAC_PTR            EQU (0xFFFDC038) ;- (EMAC) Pause Time Register
+AT91C_EMAC_SA2H           EQU (0xFFFDC0A4) ;- (EMAC) Specific Address 2 Top, Last 2 bytes
+AT91C_EMAC_ROV            EQU (0xFFFDC070) ;- (EMAC) Receive Overrun Errors Register
+AT91C_EMAC_ALE            EQU (0xFFFDC054) ;- (EMAC) Alignment Error Register
+AT91C_EMAC_RJA            EQU (0xFFFDC07C) ;- (EMAC) Receive Jabbers Register
+AT91C_EMAC_RBQP           EQU (0xFFFDC018) ;- (EMAC) Receive Buffer Queue Pointer
+AT91C_EMAC_TPF            EQU (0xFFFDC08C) ;- (EMAC) Transmitted Pause Frames Register
+AT91C_EMAC_NCFGR          EQU (0xFFFDC004) ;- (EMAC) Network Configuration Register
+AT91C_EMAC_HRT            EQU (0xFFFDC094) ;- (EMAC) Hash Address Top[63:32]
+AT91C_EMAC_USF            EQU (0xFFFDC080) ;- (EMAC) Undersize Frames Register
+AT91C_EMAC_FCSE           EQU (0xFFFDC050) ;- (EMAC) Frame Check Sequence Error Register
+AT91C_EMAC_TPQ            EQU (0xFFFDC0BC) ;- (EMAC) Transmit Pause Quantum Register
+AT91C_EMAC_MAN            EQU (0xFFFDC034) ;- (EMAC) PHY Maintenance Register
+AT91C_EMAC_FTO            EQU (0xFFFDC040) ;- (EMAC) Frames Transmitted OK Register
+AT91C_EMAC_REV            EQU (0xFFFDC0FC) ;- (EMAC) Revision Register
+AT91C_EMAC_IMR            EQU (0xFFFDC030) ;- (EMAC) Interrupt Mask Register
+AT91C_EMAC_SCF            EQU (0xFFFDC044) ;- (EMAC) Single Collision Frame Register
+AT91C_EMAC_PFR            EQU (0xFFFDC03C) ;- (EMAC) Pause Frames received Register
+AT91C_EMAC_MCF            EQU (0xFFFDC048) ;- (EMAC) Multiple Collision Frame Register
+AT91C_EMAC_NSR            EQU (0xFFFDC008) ;- (EMAC) Network Status Register
+AT91C_EMAC_SA2L           EQU (0xFFFDC0A0) ;- (EMAC) Specific Address 2 Bottom, First 4 bytes
+AT91C_EMAC_FRO            EQU (0xFFFDC04C) ;- (EMAC) Frames Received OK Register
+AT91C_EMAC_IER            EQU (0xFFFDC028) ;- (EMAC) Interrupt Enable Register
+AT91C_EMAC_SA1H           EQU (0xFFFDC09C) ;- (EMAC) Specific Address 1 Top, Last 2 bytes
+AT91C_EMAC_CSE            EQU (0xFFFDC068) ;- (EMAC) Carrier Sense Error Register
+AT91C_EMAC_SA3H           EQU (0xFFFDC0AC) ;- (EMAC) Specific Address 3 Top, Last 2 bytes
+AT91C_EMAC_RRE            EQU (0xFFFDC06C) ;- (EMAC) Receive Ressource Error Register
+AT91C_EMAC_STE            EQU (0xFFFDC084) ;- (EMAC) SQE Test Error Register
+// - ========== Register definition for PDC_ADC peripheral ==========
+AT91C_ADC_PTSR            EQU (0xFFFD8124) ;- (PDC_ADC) PDC Transfer Status Register
+AT91C_ADC_PTCR            EQU (0xFFFD8120) ;- (PDC_ADC) PDC Transfer Control Register
+AT91C_ADC_TNPR            EQU (0xFFFD8118) ;- (PDC_ADC) Transmit Next Pointer Register
+AT91C_ADC_TNCR            EQU (0xFFFD811C) ;- (PDC_ADC) Transmit Next Counter Register
+AT91C_ADC_RNPR            EQU (0xFFFD8110) ;- (PDC_ADC) Receive Next Pointer Register
+AT91C_ADC_RNCR            EQU (0xFFFD8114) ;- (PDC_ADC) Receive Next Counter Register
+AT91C_ADC_RPR             EQU (0xFFFD8100) ;- (PDC_ADC) Receive Pointer Register
+AT91C_ADC_TCR             EQU (0xFFFD810C) ;- (PDC_ADC) Transmit Counter Register
+AT91C_ADC_TPR             EQU (0xFFFD8108) ;- (PDC_ADC) Transmit Pointer Register
+AT91C_ADC_RCR             EQU (0xFFFD8104) ;- (PDC_ADC) Receive Counter Register
+// - ========== Register definition for ADC peripheral ==========
+AT91C_ADC_CDR2            EQU (0xFFFD8038) ;- (ADC) ADC Channel Data Register 2
+AT91C_ADC_CDR3            EQU (0xFFFD803C) ;- (ADC) ADC Channel Data Register 3
+AT91C_ADC_CDR0            EQU (0xFFFD8030) ;- (ADC) ADC Channel Data Register 0
+AT91C_ADC_CDR5            EQU (0xFFFD8044) ;- (ADC) ADC Channel Data Register 5
+AT91C_ADC_CHDR            EQU (0xFFFD8014) ;- (ADC) ADC Channel Disable Register
+AT91C_ADC_SR              EQU (0xFFFD801C) ;- (ADC) ADC Status Register
+AT91C_ADC_CDR4            EQU (0xFFFD8040) ;- (ADC) ADC Channel Data Register 4
+AT91C_ADC_CDR1            EQU (0xFFFD8034) ;- (ADC) ADC Channel Data Register 1
+AT91C_ADC_LCDR            EQU (0xFFFD8020) ;- (ADC) ADC Last Converted Data Register
+AT91C_ADC_IDR             EQU (0xFFFD8028) ;- (ADC) ADC Interrupt Disable Register
+AT91C_ADC_CR              EQU (0xFFFD8000) ;- (ADC) ADC Control Register
+AT91C_ADC_CDR7            EQU (0xFFFD804C) ;- (ADC) ADC Channel Data Register 7
+AT91C_ADC_CDR6            EQU (0xFFFD8048) ;- (ADC) ADC Channel Data Register 6
+AT91C_ADC_IER             EQU (0xFFFD8024) ;- (ADC) ADC Interrupt Enable Register
+AT91C_ADC_CHER            EQU (0xFFFD8010) ;- (ADC) ADC Channel Enable Register
+AT91C_ADC_CHSR            EQU (0xFFFD8018) ;- (ADC) ADC Channel Status Register
+AT91C_ADC_MR              EQU (0xFFFD8004) ;- (ADC) ADC Mode Register
+AT91C_ADC_IMR             EQU (0xFFFD802C) ;- (ADC) ADC Interrupt Mask Register
+// - *****************************************************************************
+// -               PIO DEFINITIONS FOR AT91SAM7X256
+// - *****************************************************************************
+AT91C_PIO_PA0             EQU (1 <<  0) ;- Pin Controlled by PA0
+AT91C_PA0_RXD0            EQU (AT91C_PIO_PA0) ;-  USART 0 Receive Data
+AT91C_PIO_PA1             EQU (1 <<  1) ;- Pin Controlled by PA1
+AT91C_PA1_TXD0            EQU (AT91C_PIO_PA1) ;-  USART 0 Transmit Data
+AT91C_PIO_PA10            EQU (1 << 10) ;- Pin Controlled by PA10
+AT91C_PA10_TWD            EQU (AT91C_PIO_PA10) ;-  TWI Two-wire Serial Data
+AT91C_PIO_PA11            EQU (1 << 11) ;- Pin Controlled by PA11
+AT91C_PA11_TWCK           EQU (AT91C_PIO_PA11) ;-  TWI Two-wire Serial Clock
+AT91C_PIO_PA12            EQU (1 << 12) ;- Pin Controlled by PA12
+AT91C_PA12_SPI0_NPCS0     EQU (AT91C_PIO_PA12) ;-  SPI 0 Peripheral Chip Select 0
+AT91C_PIO_PA13            EQU (1 << 13) ;- Pin Controlled by PA13
+AT91C_PA13_SPI0_NPCS1     EQU (AT91C_PIO_PA13) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PA13_PCK1           EQU (AT91C_PIO_PA13) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PA14            EQU (1 << 14) ;- Pin Controlled by PA14
+AT91C_PA14_SPI0_NPCS2     EQU (AT91C_PIO_PA14) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PA14_IRQ1           EQU (AT91C_PIO_PA14) ;-  External Interrupt 1
+AT91C_PIO_PA15            EQU (1 << 15) ;- Pin Controlled by PA15
+AT91C_PA15_SPI0_NPCS3     EQU (AT91C_PIO_PA15) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PA15_TCLK2          EQU (AT91C_PIO_PA15) ;-  Timer Counter 2 external clock input
+AT91C_PIO_PA16            EQU (1 << 16) ;- Pin Controlled by PA16
+AT91C_PA16_SPI0_MISO      EQU (AT91C_PIO_PA16) ;-  SPI 0 Master In Slave
+AT91C_PIO_PA17            EQU (1 << 17) ;- Pin Controlled by PA17
+AT91C_PA17_SPI0_MOSI      EQU (AT91C_PIO_PA17) ;-  SPI 0 Master Out Slave
+AT91C_PIO_PA18            EQU (1 << 18) ;- Pin Controlled by PA18
+AT91C_PA18_SPI0_SPCK      EQU (AT91C_PIO_PA18) ;-  SPI 0 Serial Clock
+AT91C_PIO_PA19            EQU (1 << 19) ;- Pin Controlled by PA19
+AT91C_PA19_CANRX          EQU (AT91C_PIO_PA19) ;-  CAN Receive
+AT91C_PIO_PA2             EQU (1 <<  2) ;- Pin Controlled by PA2
+AT91C_PA2_SCK0            EQU (AT91C_PIO_PA2) ;-  USART 0 Serial Clock
+AT91C_PA2_SPI1_NPCS1      EQU (AT91C_PIO_PA2) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PA20            EQU (1 << 20) ;- Pin Controlled by PA20
+AT91C_PA20_CANTX          EQU (AT91C_PIO_PA20) ;-  CAN Transmit
+AT91C_PIO_PA21            EQU (1 << 21) ;- Pin Controlled by PA21
+AT91C_PA21_TF             EQU (AT91C_PIO_PA21) ;-  SSC Transmit Frame Sync
+AT91C_PA21_SPI1_NPCS0     EQU (AT91C_PIO_PA21) ;-  SPI 1 Peripheral Chip Select 0
+AT91C_PIO_PA22            EQU (1 << 22) ;- Pin Controlled by PA22
+AT91C_PA22_TK             EQU (AT91C_PIO_PA22) ;-  SSC Transmit Clock
+AT91C_PA22_SPI1_SPCK      EQU (AT91C_PIO_PA22) ;-  SPI 1 Serial Clock
+AT91C_PIO_PA23            EQU (1 << 23) ;- Pin Controlled by PA23
+AT91C_PA23_TD             EQU (AT91C_PIO_PA23) ;-  SSC Transmit data
+AT91C_PA23_SPI1_MOSI      EQU (AT91C_PIO_PA23) ;-  SPI 1 Master Out Slave
+AT91C_PIO_PA24            EQU (1 << 24) ;- Pin Controlled by PA24
+AT91C_PA24_RD             EQU (AT91C_PIO_PA24) ;-  SSC Receive Data
+AT91C_PA24_SPI1_MISO      EQU (AT91C_PIO_PA24) ;-  SPI 1 Master In Slave
+AT91C_PIO_PA25            EQU (1 << 25) ;- Pin Controlled by PA25
+AT91C_PA25_RK             EQU (AT91C_PIO_PA25) ;-  SSC Receive Clock
+AT91C_PA25_SPI1_NPCS1     EQU (AT91C_PIO_PA25) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PA26            EQU (1 << 26) ;- Pin Controlled by PA26
+AT91C_PA26_RF             EQU (AT91C_PIO_PA26) ;-  SSC Receive Frame Sync
+AT91C_PA26_SPI1_NPCS2     EQU (AT91C_PIO_PA26) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PA27            EQU (1 << 27) ;- Pin Controlled by PA27
+AT91C_PA27_DRXD           EQU (AT91C_PIO_PA27) ;-  DBGU Debug Receive Data
+AT91C_PA27_PCK3           EQU (AT91C_PIO_PA27) ;-  PMC Programmable Clock Output 3
+AT91C_PIO_PA28            EQU (1 << 28) ;- Pin Controlled by PA28
+AT91C_PA28_DTXD           EQU (AT91C_PIO_PA28) ;-  DBGU Debug Transmit Data
+AT91C_PIO_PA29            EQU (1 << 29) ;- Pin Controlled by PA29
+AT91C_PA29_FIQ            EQU (AT91C_PIO_PA29) ;-  AIC Fast Interrupt Input
+AT91C_PA29_SPI1_NPCS3     EQU (AT91C_PIO_PA29) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PA3             EQU (1 <<  3) ;- Pin Controlled by PA3
+AT91C_PA3_RTS0            EQU (AT91C_PIO_PA3) ;-  USART 0 Ready To Send
+AT91C_PA3_SPI1_NPCS2      EQU (AT91C_PIO_PA3) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PA30            EQU (1 << 30) ;- Pin Controlled by PA30
+AT91C_PA30_IRQ0           EQU (AT91C_PIO_PA30) ;-  External Interrupt 0
+AT91C_PA30_PCK2           EQU (AT91C_PIO_PA30) ;-  PMC Programmable Clock Output 2
+AT91C_PIO_PA4             EQU (1 <<  4) ;- Pin Controlled by PA4
+AT91C_PA4_CTS0            EQU (AT91C_PIO_PA4) ;-  USART 0 Clear To Send
+AT91C_PA4_SPI1_NPCS3      EQU (AT91C_PIO_PA4) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PA5             EQU (1 <<  5) ;- Pin Controlled by PA5
+AT91C_PA5_RXD1            EQU (AT91C_PIO_PA5) ;-  USART 1 Receive Data
+AT91C_PIO_PA6             EQU (1 <<  6) ;- Pin Controlled by PA6
+AT91C_PA6_TXD1            EQU (AT91C_PIO_PA6) ;-  USART 1 Transmit Data
+AT91C_PIO_PA7             EQU (1 <<  7) ;- Pin Controlled by PA7
+AT91C_PA7_SCK1            EQU (AT91C_PIO_PA7) ;-  USART 1 Serial Clock
+AT91C_PA7_SPI0_NPCS1      EQU (AT91C_PIO_PA7) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PIO_PA8             EQU (1 <<  8) ;- Pin Controlled by PA8
+AT91C_PA8_RTS1            EQU (AT91C_PIO_PA8) ;-  USART 1 Ready To Send
+AT91C_PA8_SPI0_NPCS2      EQU (AT91C_PIO_PA8) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PIO_PA9             EQU (1 <<  9) ;- Pin Controlled by PA9
+AT91C_PA9_CTS1            EQU (AT91C_PIO_PA9) ;-  USART 1 Clear To Send
+AT91C_PA9_SPI0_NPCS3      EQU (AT91C_PIO_PA9) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PIO_PB0             EQU (1 <<  0) ;- Pin Controlled by PB0
+AT91C_PB0_ETXCK_EREFCK    EQU (AT91C_PIO_PB0) ;-  Ethernet MAC Transmit Clock/Reference Clock
+AT91C_PB0_PCK0            EQU (AT91C_PIO_PB0) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PB1             EQU (1 <<  1) ;- Pin Controlled by PB1
+AT91C_PB1_ETXEN           EQU (AT91C_PIO_PB1) ;-  Ethernet MAC Transmit Enable
+AT91C_PIO_PB10            EQU (1 << 10) ;- Pin Controlled by PB10
+AT91C_PB10_ETX2           EQU (AT91C_PIO_PB10) ;-  Ethernet MAC Transmit Data 2
+AT91C_PB10_SPI1_NPCS1     EQU (AT91C_PIO_PB10) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PB11            EQU (1 << 11) ;- Pin Controlled by PB11
+AT91C_PB11_ETX3           EQU (AT91C_PIO_PB11) ;-  Ethernet MAC Transmit Data 3
+AT91C_PB11_SPI1_NPCS2     EQU (AT91C_PIO_PB11) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PB12            EQU (1 << 12) ;- Pin Controlled by PB12
+AT91C_PB12_ETXER          EQU (AT91C_PIO_PB12) ;-  Ethernet MAC Transmikt Coding Error
+AT91C_PB12_TCLK0          EQU (AT91C_PIO_PB12) ;-  Timer Counter 0 external clock input
+AT91C_PIO_PB13            EQU (1 << 13) ;- Pin Controlled by PB13
+AT91C_PB13_ERX2           EQU (AT91C_PIO_PB13) ;-  Ethernet MAC Receive Data 2
+AT91C_PB13_SPI0_NPCS1     EQU (AT91C_PIO_PB13) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PIO_PB14            EQU (1 << 14) ;- Pin Controlled by PB14
+AT91C_PB14_ERX3           EQU (AT91C_PIO_PB14) ;-  Ethernet MAC Receive Data 3
+AT91C_PB14_SPI0_NPCS2     EQU (AT91C_PIO_PB14) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PIO_PB15            EQU (1 << 15) ;- Pin Controlled by PB15
+AT91C_PB15_ERXDV_ECRSDV   EQU (AT91C_PIO_PB15) ;-  Ethernet MAC Receive Data Valid
+AT91C_PIO_PB16            EQU (1 << 16) ;- Pin Controlled by PB16
+AT91C_PB16_ECOL           EQU (AT91C_PIO_PB16) ;-  Ethernet MAC Collision Detected
+AT91C_PB16_SPI1_NPCS3     EQU (AT91C_PIO_PB16) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PB17            EQU (1 << 17) ;- Pin Controlled by PB17
+AT91C_PB17_ERXCK          EQU (AT91C_PIO_PB17) ;-  Ethernet MAC Receive Clock
+AT91C_PB17_SPI0_NPCS3     EQU (AT91C_PIO_PB17) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PIO_PB18            EQU (1 << 18) ;- Pin Controlled by PB18
+AT91C_PB18_EF100          EQU (AT91C_PIO_PB18) ;-  Ethernet MAC Force 100 Mbits/sec
+AT91C_PB18_ADTRG          EQU (AT91C_PIO_PB18) ;-  ADC External Trigger
+AT91C_PIO_PB19            EQU (1 << 19) ;- Pin Controlled by PB19
+AT91C_PB19_PWM0           EQU (AT91C_PIO_PB19) ;-  PWM Channel 0
+AT91C_PB19_TCLK1          EQU (AT91C_PIO_PB19) ;-  Timer Counter 1 external clock input
+AT91C_PIO_PB2             EQU (1 <<  2) ;- Pin Controlled by PB2
+AT91C_PB2_ETX0            EQU (AT91C_PIO_PB2) ;-  Ethernet MAC Transmit Data 0
+AT91C_PIO_PB20            EQU (1 << 20) ;- Pin Controlled by PB20
+AT91C_PB20_PWM1           EQU (AT91C_PIO_PB20) ;-  PWM Channel 1
+AT91C_PB20_PCK0           EQU (AT91C_PIO_PB20) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PB21            EQU (1 << 21) ;- Pin Controlled by PB21
+AT91C_PB21_PWM2           EQU (AT91C_PIO_PB21) ;-  PWM Channel 2
+AT91C_PB21_PCK1           EQU (AT91C_PIO_PB21) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PB22            EQU (1 << 22) ;- Pin Controlled by PB22
+AT91C_PB22_PWM3           EQU (AT91C_PIO_PB22) ;-  PWM Channel 3
+AT91C_PB22_PCK2           EQU (AT91C_PIO_PB22) ;-  PMC Programmable Clock Output 2
+AT91C_PIO_PB23            EQU (1 << 23) ;- Pin Controlled by PB23
+AT91C_PB23_TIOA0          EQU (AT91C_PIO_PB23) ;-  Timer Counter 0 Multipurpose Timer I/O Pin A
+AT91C_PB23_DCD1           EQU (AT91C_PIO_PB23) ;-  USART 1 Data Carrier Detect
+AT91C_PIO_PB24            EQU (1 << 24) ;- Pin Controlled by PB24
+AT91C_PB24_TIOB0          EQU (AT91C_PIO_PB24) ;-  Timer Counter 0 Multipurpose Timer I/O Pin B
+AT91C_PB24_DSR1           EQU (AT91C_PIO_PB24) ;-  USART 1 Data Set ready
+AT91C_PIO_PB25            EQU (1 << 25) ;- Pin Controlled by PB25
+AT91C_PB25_TIOA1          EQU (AT91C_PIO_PB25) ;-  Timer Counter 1 Multipurpose Timer I/O Pin A
+AT91C_PB25_DTR1           EQU (AT91C_PIO_PB25) ;-  USART 1 Data Terminal ready
+AT91C_PIO_PB26            EQU (1 << 26) ;- Pin Controlled by PB26
+AT91C_PB26_TIOB1          EQU (AT91C_PIO_PB26) ;-  Timer Counter 1 Multipurpose Timer I/O Pin B
+AT91C_PB26_RI1            EQU (AT91C_PIO_PB26) ;-  USART 1 Ring Indicator
+AT91C_PIO_PB27            EQU (1 << 27) ;- Pin Controlled by PB27
+AT91C_PB27_TIOA2          EQU (AT91C_PIO_PB27) ;-  Timer Counter 2 Multipurpose Timer I/O Pin A
+AT91C_PB27_PWM0           EQU (AT91C_PIO_PB27) ;-  PWM Channel 0
+AT91C_PIO_PB28            EQU (1 << 28) ;- Pin Controlled by PB28
+AT91C_PB28_TIOB2          EQU (AT91C_PIO_PB28) ;-  Timer Counter 2 Multipurpose Timer I/O Pin B
+AT91C_PB28_PWM1           EQU (AT91C_PIO_PB28) ;-  PWM Channel 1
+AT91C_PIO_PB29            EQU (1 << 29) ;- Pin Controlled by PB29
+AT91C_PB29_PCK1           EQU (AT91C_PIO_PB29) ;-  PMC Programmable Clock Output 1
+AT91C_PB29_PWM2           EQU (AT91C_PIO_PB29) ;-  PWM Channel 2
+AT91C_PIO_PB3             EQU (1 <<  3) ;- Pin Controlled by PB3
+AT91C_PB3_ETX1            EQU (AT91C_PIO_PB3) ;-  Ethernet MAC Transmit Data 1
+AT91C_PIO_PB30            EQU (1 << 30) ;- Pin Controlled by PB30
+AT91C_PB30_PCK2           EQU (AT91C_PIO_PB30) ;-  PMC Programmable Clock Output 2
+AT91C_PB30_PWM3           EQU (AT91C_PIO_PB30) ;-  PWM Channel 3
+AT91C_PIO_PB4             EQU (1 <<  4) ;- Pin Controlled by PB4
+AT91C_PB4_ECRS            EQU (AT91C_PIO_PB4) ;-  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+AT91C_PIO_PB5             EQU (1 <<  5) ;- Pin Controlled by PB5
+AT91C_PB5_ERX0            EQU (AT91C_PIO_PB5) ;-  Ethernet MAC Receive Data 0
+AT91C_PIO_PB6             EQU (1 <<  6) ;- Pin Controlled by PB6
+AT91C_PB6_ERX1            EQU (AT91C_PIO_PB6) ;-  Ethernet MAC Receive Data 1
+AT91C_PIO_PB7             EQU (1 <<  7) ;- Pin Controlled by PB7
+AT91C_PB7_ERXER           EQU (AT91C_PIO_PB7) ;-  Ethernet MAC Receive Error
+AT91C_PIO_PB8             EQU (1 <<  8) ;- Pin Controlled by PB8
+AT91C_PB8_EMDC            EQU (AT91C_PIO_PB8) ;-  Ethernet MAC Management Data Clock
+AT91C_PIO_PB9             EQU (1 <<  9) ;- Pin Controlled by PB9
+AT91C_PB9_EMDIO           EQU (AT91C_PIO_PB9) ;-  Ethernet MAC Management Data Input/Output
+// - *****************************************************************************
+// -               PERIPHERAL ID DEFINITIONS FOR AT91SAM7X256
+// - *****************************************************************************
+AT91C_ID_FIQ              EQU ( 0) ;- Advanced Interrupt Controller (FIQ)
+AT91C_ID_SYS              EQU ( 1) ;- System Peripheral
+AT91C_ID_PIOA             EQU ( 2) ;- Parallel IO Controller A
+AT91C_ID_PIOB             EQU ( 3) ;- Parallel IO Controller B
+AT91C_ID_SPI0             EQU ( 4) ;- Serial Peripheral Interface 0
+AT91C_ID_SPI1             EQU ( 5) ;- Serial Peripheral Interface 1
+AT91C_ID_US0              EQU ( 6) ;- USART 0
+AT91C_ID_US1              EQU ( 7) ;- USART 1
+AT91C_ID_SSC              EQU ( 8) ;- Serial Synchronous Controller
+AT91C_ID_TWI              EQU ( 9) ;- Two-Wire Interface
+AT91C_ID_PWMC             EQU (10) ;- PWM Controller
+AT91C_ID_UDP              EQU (11) ;- USB Device Port
+AT91C_ID_TC0              EQU (12) ;- Timer Counter 0
+AT91C_ID_TC1              EQU (13) ;- Timer Counter 1
+AT91C_ID_TC2              EQU (14) ;- Timer Counter 2
+AT91C_ID_CAN              EQU (15) ;- Control Area Network Controller
+AT91C_ID_EMAC             EQU (16) ;- Ethernet MAC
+AT91C_ID_ADC              EQU (17) ;- Analog-to-Digital Converter
+AT91C_ID_18_Reserved      EQU (18) ;- Reserved
+AT91C_ID_19_Reserved      EQU (19) ;- Reserved
+AT91C_ID_20_Reserved      EQU (20) ;- Reserved
+AT91C_ID_21_Reserved      EQU (21) ;- Reserved
+AT91C_ID_22_Reserved      EQU (22) ;- Reserved
+AT91C_ID_23_Reserved      EQU (23) ;- Reserved
+AT91C_ID_24_Reserved      EQU (24) ;- Reserved
+AT91C_ID_25_Reserved      EQU (25) ;- Reserved
+AT91C_ID_26_Reserved      EQU (26) ;- Reserved
+AT91C_ID_27_Reserved      EQU (27) ;- Reserved
+AT91C_ID_28_Reserved      EQU (28) ;- Reserved
+AT91C_ID_29_Reserved      EQU (29) ;- Reserved
+AT91C_ID_IRQ0             EQU (30) ;- Advanced Interrupt Controller (IRQ0)
+AT91C_ID_IRQ1             EQU (31) ;- Advanced Interrupt Controller (IRQ1)
+AT91C_ALL_INT             EQU (0xC003FFFF) ;- ALL VALID INTERRUPTS
+// - *****************************************************************************
+// -               BASE ADDRESS DEFINITIONS FOR AT91SAM7X256
+// - *****************************************************************************
+AT91C_BASE_SYS            EQU (0xFFFFF000) ;- (SYS) Base Address
+AT91C_BASE_AIC            EQU (0xFFFFF000) ;- (AIC) Base Address
+AT91C_BASE_PDC_DBGU       EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address
+AT91C_BASE_DBGU           EQU (0xFFFFF200) ;- (DBGU) Base Address
+AT91C_BASE_PIOA           EQU (0xFFFFF400) ;- (PIOA) Base Address
+AT91C_BASE_PIOB           EQU (0xFFFFF600) ;- (PIOB) Base Address
+AT91C_BASE_CKGR           EQU (0xFFFFFC20) ;- (CKGR) Base Address
+AT91C_BASE_PMC            EQU (0xFFFFFC00) ;- (PMC) Base Address
+AT91C_BASE_RSTC           EQU (0xFFFFFD00) ;- (RSTC) Base Address
+AT91C_BASE_RTTC           EQU (0xFFFFFD20) ;- (RTTC) Base Address
+AT91C_BASE_PITC           EQU (0xFFFFFD30) ;- (PITC) Base Address
+AT91C_BASE_WDTC           EQU (0xFFFFFD40) ;- (WDTC) Base Address
+AT91C_BASE_VREG           EQU (0xFFFFFD60) ;- (VREG) Base Address
+AT91C_BASE_MC             EQU (0xFFFFFF00) ;- (MC) Base Address
+AT91C_BASE_PDC_SPI1       EQU (0xFFFE4100) ;- (PDC_SPI1) Base Address
+AT91C_BASE_SPI1           EQU (0xFFFE4000) ;- (SPI1) Base Address
+AT91C_BASE_PDC_SPI0       EQU (0xFFFE0100) ;- (PDC_SPI0) Base Address
+AT91C_BASE_SPI0           EQU (0xFFFE0000) ;- (SPI0) Base Address
+AT91C_BASE_PDC_US1        EQU (0xFFFC4100) ;- (PDC_US1) Base Address
+AT91C_BASE_US1            EQU (0xFFFC4000) ;- (US1) Base Address
+AT91C_BASE_PDC_US0        EQU (0xFFFC0100) ;- (PDC_US0) Base Address
+AT91C_BASE_US0            EQU (0xFFFC0000) ;- (US0) Base Address
+AT91C_BASE_PDC_SSC        EQU (0xFFFD4100) ;- (PDC_SSC) Base Address
+AT91C_BASE_SSC            EQU (0xFFFD4000) ;- (SSC) Base Address
+AT91C_BASE_TWI            EQU (0xFFFB8000) ;- (TWI) Base Address
+AT91C_BASE_PWMC_CH3       EQU (0xFFFCC260) ;- (PWMC_CH3) Base Address
+AT91C_BASE_PWMC_CH2       EQU (0xFFFCC240) ;- (PWMC_CH2) Base Address
+AT91C_BASE_PWMC_CH1       EQU (0xFFFCC220) ;- (PWMC_CH1) Base Address
+AT91C_BASE_PWMC_CH0       EQU (0xFFFCC200) ;- (PWMC_CH0) Base Address
+AT91C_BASE_PWMC           EQU (0xFFFCC000) ;- (PWMC) Base Address
+AT91C_BASE_UDP            EQU (0xFFFB0000) ;- (UDP) Base Address
+AT91C_BASE_TC0            EQU (0xFFFA0000) ;- (TC0) Base Address
+AT91C_BASE_TC1            EQU (0xFFFA0040) ;- (TC1) Base Address
+AT91C_BASE_TC2            EQU (0xFFFA0080) ;- (TC2) Base Address
+AT91C_BASE_TCB            EQU (0xFFFA0000) ;- (TCB) Base Address
+AT91C_BASE_CAN_MB0        EQU (0xFFFD0200) ;- (CAN_MB0) Base Address
+AT91C_BASE_CAN_MB1        EQU (0xFFFD0220) ;- (CAN_MB1) Base Address
+AT91C_BASE_CAN_MB2        EQU (0xFFFD0240) ;- (CAN_MB2) Base Address
+AT91C_BASE_CAN_MB3        EQU (0xFFFD0260) ;- (CAN_MB3) Base Address
+AT91C_BASE_CAN_MB4        EQU (0xFFFD0280) ;- (CAN_MB4) Base Address
+AT91C_BASE_CAN_MB5        EQU (0xFFFD02A0) ;- (CAN_MB5) Base Address
+AT91C_BASE_CAN_MB6        EQU (0xFFFD02C0) ;- (CAN_MB6) Base Address
+AT91C_BASE_CAN_MB7        EQU (0xFFFD02E0) ;- (CAN_MB7) Base Address
+AT91C_BASE_CAN            EQU (0xFFFD0000) ;- (CAN) Base Address
+AT91C_BASE_EMAC           EQU (0xFFFDC000) ;- (EMAC) Base Address
+AT91C_BASE_PDC_ADC        EQU (0xFFFD8100) ;- (PDC_ADC) Base Address
+AT91C_BASE_ADC            EQU (0xFFFD8000) ;- (ADC) Base Address
+// - *****************************************************************************
+// -               MEMORY MAPPING DEFINITIONS FOR AT91SAM7X256
+// - *****************************************************************************
+// - ISRAM
+AT91C_ISRAM               EQU (0x00200000) ;- Internal SRAM base address
+AT91C_ISRAM_SIZE          EQU (0x00010000) ;- Internal SRAM size in byte (64 Kbytes)
+// - IFLASH
+AT91C_IFLASH              EQU (0x00100000) ;- Internal FLASH base address
+AT91C_IFLASH_SIZE         EQU (0x00040000) ;- Internal FLASH size in byte (256 Kbytes)
+AT91C_IFLASH_PAGE_SIZE    EQU (256) ;- Internal FLASH Page Size: 256 bytes
+AT91C_IFLASH_LOCK_REGION_SIZE EQU (16384) ;- Internal FLASH Lock Region Size: 16 Kbytes
+AT91C_IFLASH_NB_OF_PAGES  EQU (1024) ;- Internal FLASH Number of Pages: 1024 bytes
+AT91C_IFLASH_NB_OF_LOCK_BITS EQU (16) ;- Internal FLASH Number of Lock Bits: 16 bytes
+#endif /* __IAR_SYSTEMS_ASM__ */
+#endif /* AT91SAM7X256_H */