ceedling 0.13.0.rc1 → 0.13.0

data/vendor/c_exception/vendor/unity/auto/test_file_filter.rb

@@ -0,0 +1,23 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ========================================== 
+
+require'yaml'
+
+module RakefileHelpers
+  class TestFileFilter
+    def initialize(all_files = false)
+      @all_files = all_files
+      if not @all_files == true
+        if File.exist?('test_file_filter.yml')
+          filters = YAML.load_file( 'test_file_filter.yml' )
+          @all_files, @only_files, @exclude_files = 
+            filters[:all_files], filters[:only_files], filters[:exclude_files] 
+        end
+      end
+    end		
+    attr_accessor :all_files, :only_files, :exclude_files
+  end
+end

data/vendor/c_exception/vendor/unity/auto/unity_test_summary.rb

@@ -0,0 +1,139 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ========================================== 
+
+#!/usr/bin/ruby
+#
+# unity_test_summary.rb
+#
+require 'fileutils'
+require 'set'
+
+class UnityTestSummary
+  include FileUtils::Verbose
+
+  attr_reader :report, :total_tests, :failures, :ignored
+  
+  def initialize
+    @report = ''
+    @total_tests = 0
+    @failures = 0
+    @ignored = 0
+  end
+  
+  def run
+    # Clean up result file names
+    results = @targets.map {|target| target.gsub(/\\/,'/')}
+    
+    # Dig through each result file, looking for details on pass/fail:   
+    failure_output = []
+    ignore_output = []
+    
+    results.each do |result_file|
+      lines = File.readlines(result_file).map { |line| line.chomp }
+      if lines.length == 0
+        raise "Empty test result file: #{result_file}"
+      else
+        output = get_details(result_file, lines)
+        failure_output << output[:failures] unless output[:failures].empty?
+        ignore_output  << output[:ignores]  unless output[:ignores].empty?
+        tests,failures,ignored = parse_test_summary(lines)
+        @total_tests += tests
+        @failures += failures
+        @ignored += ignored
+      end
+    end
+    
+    if @ignored > 0
+      @report += "\n"
+      @report += "--------------------------\n"
+      @report += "UNITY IGNORED TEST SUMMARY\n"
+      @report += "--------------------------\n"
+      @report += ignore_output.flatten.join("\n")
+    end
+    
+    if @failures > 0
+      @report += "\n"
+      @report += "--------------------------\n"
+      @report += "UNITY FAILED TEST SUMMARY\n"
+      @report += "--------------------------\n"
+      @report += failure_output.flatten.join("\n")
+    end
+  
+    @report += "\n"
+    @report += "--------------------------\n"
+    @report += "OVERALL UNITY TEST SUMMARY\n"
+    @report += "--------------------------\n"
+    @report += "#{@total_tests} TOTAL TESTS #{@failures} TOTAL FAILURES #{@ignored} IGNORED\n"
+    @report += "\n"
+  end
+  
+  def set_targets(target_array)
+    @targets = target_array
+  end
+  
+  def set_root_path(path)
+    @root = path
+  end
+
+  def usage(err_msg=nil)
+    puts "\nERROR: "
+    puts err_msg if err_msg
+    puts "\nUsage: unity_test_summary.rb result_file_directoy/ root_path/"
+    puts "     result_file_directory - The location of your relults files." 
+    puts "                             Defaults to current directory if not specified."
+    puts "                             Should end in / if specified."
+    puts "     root_path - Helpful for producing more verbose output if using relative paths."
+    exit 1
+  end
+  
+  protected
+
+  def get_details(result_file, lines)
+    results = { :failures => [], :ignores => [], :successes => [] }
+    lines.each do |line|
+      src_file,src_line,test_name,status,msg = line.split(/:/)
+      line_out = ((@root and (@root != 0)) ? "#{@root}#{line}" : line ).gsub(/\//, "\\")
+      case(status)
+        when 'IGNORE' then results[:ignores]   << line_out
+        when 'FAIL'   then results[:failures]  << line_out
+        when 'PASS'   then results[:successes] << line_out
+      end
+    end
+    return results
+  end
+  
+  def parse_test_summary(summary)
+    if summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
+      [$1.to_i,$2.to_i,$3.to_i]
+    else
+      raise "Couldn't parse test results: #{summary}"
+    end
+  end
+
+  def here; File.expand_path(File.dirname(__FILE__)); end
+  
+end
+
+if $0 == __FILE__
+  uts = UnityTestSummary.new
+  begin
+    #look in the specified or current directory for result files
+    ARGV[0] ||= './'
+    targets = "#{ARGV[0].gsub(/\\/, '/')}*.test*"
+    results = Dir[targets]
+    raise "No *.testpass or *.testfail files found in '#{targets}'" if results.empty?
+    uts.set_targets(results)
+    
+    #set the root path
+    ARGV[1] ||= File.expand_path(File.dirname(__FILE__)) + '/'
+    uts.set_root_path(ARGV[1])
+    
+    #run the summarizer
+    puts uts.run
+  rescue Exception => e
+    uts.usage e.message
+  end
+end

data/vendor/c_exception/vendor/unity/docs/Unity Summary.txt

@@ -0,0 +1,217 @@
+==============
+Unity Test API
+==============
+
+[Copyright (c) 2007 - Unity Project by Mike Karlesky, Mark VanderVoord, and Greg Williams]
+
+-------------
+Running Tests 
+------------- 
+
+RUN_TEST(func, linenum)
+
+Each Test is run within the macro RUN_TEST.  This macro performs necessary setup before the test is called and handles cleanup and result tabulation afterwards.
+
+--------------
+Ignoring Tests
+--------------
+
+There are times when a test is incomplete or not valid for some reason.  At these times, TEST_IGNORE can be called.  Control will immediately be returned to the caller of the test, and no failures will be returned.
+
+TEST_IGNORE()
+
+Ignore this test and return immediately
+
+TEST_IGNORE_MESSAGE (message)
+
+Ignore this test and return immediately.  Output a message stating why the test was ignored.
+
+--------------
+Aborting Tests
+--------------
+
+There are times when a test will contain an infinite loop on error conditions, or there may be reason to escape from the test early without executing the rest of the test.  A pair of macros support this functionality in Unity.  The first (TEST_PROTECT) sets up the feature, and handles emergency abort cases.  TEST_ABORT can then be used at any time within the tests to return to the last TEST_PROTECT call.
+
+TEST_PROTECT()
+
+Setup and Catch macro
+
+TEST_ABORT()
+
+Abort Test macro
+
+Example:
+
+main()
+{
+    if (TEST_PROTECT() == 0)
+    {
+        MyTest();
+    }
+}
+
+If MyTest calls TEST_ABORT, program control will immediately return to TEST_PROTECT with a non-zero return value.
+
+
+=======================
+Unity Assertion Summary
+=======================
+
+--------------------
+Basic Validity Tests
+--------------------
+
+TEST_ASSERT_TRUE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to false
+
+TEST_ASSERT_FALSE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to true
+
+TEST_ASSERT(condition)
+
+Another way of calling TEST_ASSERT_TRUE
+
+TEST_ASSERT_UNLESS(condition)
+
+Another way of calling TEST_ASSERT_FALSE
+
+TEST_FAIL()
+TEST_FAIL_MESSAGE(message)
+
+This test is automatically marked as a failure.  The message is output stating why.
+
+------------------------------
+Numerical Assertions: Integers
+------------------------------
+
+TEST_ASSERT_EQUAL_INT(expected, actual)
+TEST_ASSERT_EQUAL_INT8(expected, actual)
+TEST_ASSERT_EQUAL_INT16(expected, actual)
+TEST_ASSERT_EQUAL_INT32(expected, actual)
+TEST_ASSERT_EQUAL_INT64(expected, actual)
+
+Compare two integers for equality and display errors as signed integers. A cast will be performed
+to your natural integer size so often this can just be used.  When you need to specify the exact size,
+like when comparing arrays, you can use a specific version:
+
+
+
+TEST_ASSERT_EQUAL_UINT(expected, actual)	
+
+Compare two integers for equality and display errors as unsigned integers.  Like INT, there are 
+variants for different sizes also.
+
+
+
+TEST_ASSERT_EQUAL_HEX(expected, actual)
+
+Compares two integers for equality and display errors as hexadecimal.  Like the other integer comparisons,
+you can specify the size... here the size will also effect how many nibbles are shown (for example, HEX16 
+will show 4 nibbles).
+
+_ARRAY
+
+You can append _ARRAY to any of these macros to make an array comparison of that type.  Here you will
+need to care a bit more about the actual size of the value being checked.  You will also specify an
+additional argument which is the number of elements to compare.  For example:
+
+TEST_ASSERT_EQUAL_HEX8_ARRAY(expected, actual, elements)
+
+
+TEST_ASSERT_EQUAL(expected, actual)
+
+Another way of calling TEST_ASSERT_EQUAL_INT
+
+
+
+TEST_ASSERT_INT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value.  This also comes in 
+size specific variants.
+
+
+-----------------------------
+Numerical Assertions: Bitwise
+-----------------------------
+
+TEST_ASSERT_BITS(mask, expected, actual)
+
+Use an integer mask to specify which bits should be compared between two other integers.  High bits in the mask are compared, low bits ignored.
+
+TEST_ASSERT_BITS_HIGH(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set high.  High bits in the mask are compared, low bits ignored.
+
+TEST_ASSERT_BITS_LOW(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set low.  High bits in the mask are compared, low bits ignored.
+
+TEST_ASSERT_BIT_HIGH(bit, actual)
+
+Test a single bit and verify that it is high.  The bit is specified 0-31 for a 32-bit integer.
+
+TEST_ASSERT_BIT_LOW(bit, actual)
+
+Test a single bit and verify that it is low.  The bit is specified 0-31 for a 32-bit integer.
+
+----------------------------
+Numerical Assertions: Floats
+----------------------------
+
+TEST_ASSERT_FLOAT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value.
+
+TEST_ASSERT_EQUAL_FLOAT(expected, actual)
+
+Asserts that two floating point values are "equal" within a small % delta of the expected value.
+
+-----------------
+String Assertions
+-----------------
+
+TEST_ASSERT_EQUAL_STRING(expected, actual)
+
+Compare two null-terminate strings.  Fail if any character is different or if the lengths are different.
+
+TEST_ASSERT_EQUAL_STRING_MESSAGE(expected, actual, message)
+
+Compare two null-terminate strings.  Fail if any character is different or if the lengths are different. Output a custom message on failure.
+
+------------------
+Pointer Assertions
+------------------
+
+Most pointer operations can be performed by simply using the integer comparisons above.  However, a couple of special cases are added for clarity.
+
+TEST_ASSERT_NULL(pointer)
+
+Fails if the pointer is not equal to NULL
+
+TEST_ASSERT_NOT_NULL(pointer)
+
+Fails if the pointer is equal to NULL
+
+
+-----------------
+Memory Assertions
+-----------------
+
+TEST_ASSERT_EQUAL_MEMORY(expected, actual, len)
+
+Compare two blocks of memory.  This is a good generic assertion for types that can't be coerced into acting like
+standard types... but since it's a memory compare, you have to be careful that your data types are packed.
+
+--------
+_MESSAGE
+--------
+
+you can append _MESSAGE to any of the macros to make them take an additional argument.  This argument
+is a string that will be printed at the end of the failure strings.  This is useful for specifying more
+information about the problem.
+
+
+
+

data/vendor/c_exception/vendor/unity/docs/license.txt

@@ -0,0 +1,31 @@
+ Copyright (c) 2007-2010 Mike Karlesky, Mark VanderVoord, Greg Williams
+
+ Permission is hereby granted, free of charge, to any person
+ obtaining a copy of this software and associated documentation
+ files (the "Software"), to deal in the Software without
+ restriction, including without limitation the rights to use,
+ copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following
+ conditions:
+
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+
+ The end-user documentation included with the redistribution, if 
+ any, must include the following acknowledgment: "This product 
+ includes software developed for the Unity Project, by Mike Karlesky,
+ Mark VanderVoord, and Greg Williams and other contributors", in 
+ the same place and form as other third-party acknowledgments. 
+ Alternately, this acknowledgment may appear in the software 
+ itself, in the same form and location as other such third-party 
+ acknowledgments.
+ 
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ OTHER DEALINGS IN THE SOFTWARE.

data/vendor/c_exception/vendor/unity/examples/helper/UnityHelper.c

@@ -0,0 +1,10 @@
+#include "unity.h"
+#include "UnityHelper.h"
+#include <stdio.h>
+#include <string.h>
+
+void AssertEqualExampleStruct(const EXAMPLE_STRUCT_T expected, const EXAMPLE_STRUCT_T actual, const unsigned short line)
+{
+    UNITY_TEST_ASSERT_EQUAL_INT(expected.x, actual.x, line, "Example Struct Failed For Field x");
+    UNITY_TEST_ASSERT_EQUAL_INT(expected.y, actual.y, line, "Example Struct Failed For Field y");
+}

data/vendor/c_exception/vendor/unity/examples/helper/UnityHelper.h

@@ -0,0 +1,12 @@
+#ifndef _TESTHELPER_H
+#define _TESTHELPER_H
+
+#include "Types.h"
+
+void AssertEqualExampleStruct(const EXAMPLE_STRUCT_T expected, const EXAMPLE_STRUCT_T actual, const unsigned short line);
+
+#define UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, line, message) AssertEqualExampleStruct(expected, actual, line);
+
+#define TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual) UNITY_TEST_ASSERT_EQUAL_EXAMPLE_STRUCT_T(expected, actual, __LINE__, NULL);
+
+#endif // _TESTHELPER_H

data/vendor/c_exception/vendor/unity/examples/makefile

@@ -0,0 +1,40 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ========================================== 
+
+C_COMPILER=gcc
+TARGET_BASE1=test1
+TARGET_BASE2=test2
+ifeq ($(OS),Windows_NT)
+	TARGET_EXTENSION=.exe
+else
+	TARGET_EXTENSION=.out
+endif
+TARGET1 = $(TARGET_BASE1)$(TARGET_EXTENSION)
+TARGET2 = $(TARGET_BASE2)$(TARGET_EXTENSION)
+SRC_FILES1=../src/unity.c src/ProductionCode.c  test/TestProductionCode.c  test/no_ruby/TestProductionCode_Runner.c
+SRC_FILES2=../src/unity.c src/ProductionCode2.c test/TestProductionCode2.c test/no_ruby/TestProductionCode2_Runner.c
+INC_DIRS=-Isrc -I../src
+SYMBOLS=-DTEST
+
+ifeq ($(OS),Windows_NT)
+	CLEANUP = del /F /Q build\* && del /F /Q $(TARGET1) && del /F /Q $(TARGET2)
+else
+	CLEANUP = rm -f build/*.o ; rm -f $(TARGET1) ; rm -f $(TARGET2)
+endif
+
+all: clean default
+
+default:
+#	ruby auto/generate_test_runner.rb test/TestProductionCode.c  test/no_ruby/TestProductionCode_Runner.c
+#	ruby auto/generate_test_runner.rb test/TestProductionCode2.c test/no_ruby/TestProductionCode2_Runner.c
+	$(C_COMPILER) $(INC_DIRS) $(SYMBOLS) $(SRC_FILES1) -o $(TARGET1)
+	$(C_COMPILER) $(INC_DIRS) $(SYMBOLS) $(SRC_FILES2) -o $(TARGET2)
+	$(TARGET1)
+	$(TARGET2)
+
+clean:
+	$(CLEANUP)
+