ceedling 0.13.0.rc1 → 0.13.0

data/vendor/cmock/iar/iar_v4/incIAR/AT91SAM7X256_inc.h

@@ -0,0 +1,2268 @@
+//  ----------------------------------------------------------------------------
+//          ATMEL Microcontroller Software Support  -  ROUSSET  -
+//  ----------------------------------------------------------------------------
+//  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+//  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+//  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+//  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+//  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+//  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+//  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+//  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+//  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//  ----------------------------------------------------------------------------
+// File Name           : AT91SAM7X256.h
+// Object              : AT91SAM7X256 definitions
+// Generated           : AT91 SW Application Group  11/02/2005 (15:17:24)
+// 
+// CVS Reference       : /AT91SAM7X256.pl/1.14/Tue Sep 13 15:06:52 2005//
+// CVS Reference       : /SYS_SAM7X.pl/1.3/Tue Feb  1 17:01:43 2005//
+// CVS Reference       : /MC_SAM7X.pl/1.2/Fri May 20 14:13:04 2005//
+// CVS Reference       : /PMC_SAM7X.pl/1.4/Tue Feb  8 13:58:10 2005//
+// CVS Reference       : /RSTC_SAM7X.pl/1.2/Wed Jul 13 14:57:50 2005//
+// CVS Reference       : /UDP_SAM7X.pl/1.1/Tue May 10 11:35:35 2005//
+// CVS Reference       : /PWM_SAM7X.pl/1.1/Tue May 10 11:53:07 2005//
+// CVS Reference       : /AIC_6075B.pl/1.3/Fri May 20 14:01:30 2005//
+// CVS Reference       : /PIO_6057A.pl/1.2/Thu Feb  3 10:18:28 2005//
+// CVS Reference       : /RTTC_6081A.pl/1.2/Tue Nov  9 14:43:58 2004//
+// CVS Reference       : /PITC_6079A.pl/1.2/Tue Nov  9 14:43:56 2004//
+// CVS Reference       : /WDTC_6080A.pl/1.3/Tue Nov  9 14:44:00 2004//
+// CVS Reference       : /VREG_6085B.pl/1.1/Tue Feb  1 16:05:48 2005//
+// CVS Reference       : /PDC_6074C.pl/1.2/Thu Feb  3 08:48:54 2005//
+// CVS Reference       : /DBGU_6059D.pl/1.1/Mon Jan 31 13:15:32 2005//
+// CVS Reference       : /SPI_6088D.pl/1.3/Fri May 20 14:08:59 2005//
+// CVS Reference       : /US_6089C.pl/1.1/Mon Jul 12 18:23:26 2004//
+// CVS Reference       : /SSC_6078B.pl/1.1/Wed Jul 13 15:19:19 2005//
+// CVS Reference       : /TWI_6061A.pl/1.1/Tue Jul 13 07:38:06 2004//
+// CVS Reference       : /TC_6082A.pl/1.7/Fri Mar 11 12:52:17 2005//
+// CVS Reference       : /CAN_6019B.pl/1.1/Tue Mar  8 12:42:22 2005//
+// CVS Reference       : /EMACB_6119A.pl/1.6/Wed Jul 13 15:05:35 2005//
+// CVS Reference       : /ADC_6051C.pl/1.1/Fri Oct 17 09:12:38 2003//
+//  ----------------------------------------------------------------------------
+
+// Hardware register definition
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR System Peripherals
+// *****************************************************************************
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+// *****************************************************************************
+// *** Register offset in AT91S_AIC structure ***
+#define AIC_SMR         ( 0) // Source Mode Register
+#define AIC_SVR         (128) // Source Vector Register
+#define AIC_IVR         (256) // IRQ Vector Register
+#define AIC_FVR         (260) // FIQ Vector Register
+#define AIC_ISR         (264) // Interrupt Status Register
+#define AIC_IPR         (268) // Interrupt Pending Register
+#define AIC_IMR         (272) // Interrupt Mask Register
+#define AIC_CISR        (276) // Core Interrupt Status Register
+#define AIC_IECR        (288) // Interrupt Enable Command Register
+#define AIC_IDCR        (292) // Interrupt Disable Command Register
+#define AIC_ICCR        (296) // Interrupt Clear Command Register
+#define AIC_ISCR        (300) // Interrupt Set Command Register
+#define AIC_EOICR       (304) // End of Interrupt Command Register
+#define AIC_SPU         (308) // Spurious Vector Register
+#define AIC_DCR         (312) // Debug Control Register (Protect)
+#define AIC_FFER        (320) // Fast Forcing Enable Register
+#define AIC_FFDR        (324) // Fast Forcing Disable Register
+#define AIC_FFSR        (328) // Fast Forcing Status Register
+// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
+#define AT91C_AIC_PRIOR           (0x7 <<  0) // (AIC) Priority Level
+#define 	AT91C_AIC_PRIOR_LOWEST               (0x0) // (AIC) Lowest priority level
+#define 	AT91C_AIC_PRIOR_HIGHEST              (0x7) // (AIC) Highest priority level
+#define AT91C_AIC_SRCTYPE         (0x3 <<  5) // (AIC) Interrupt Source Type
+#define 	AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL       (0x0 <<  5) // (AIC) Internal Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL        (0x0 <<  5) // (AIC) External Sources Code Label Low-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE    (0x1 <<  5) // (AIC) Internal Sources Code Label Positive Edge triggered
+#define 	AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE    (0x1 <<  5) // (AIC) External Sources Code Label Negative Edge triggered
+#define 	AT91C_AIC_SRCTYPE_HIGH_LEVEL           (0x2 <<  5) // (AIC) Internal Or External Sources Code Label High-level Sensitive
+#define 	AT91C_AIC_SRCTYPE_POSITIVE_EDGE        (0x3 <<  5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered
+// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
+#define AT91C_AIC_NFIQ            (0x1 <<  0) // (AIC) NFIQ Status
+#define AT91C_AIC_NIRQ            (0x1 <<  1) // (AIC) NIRQ Status
+// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
+#define AT91C_AIC_DCR_PROT        (0x1 <<  0) // (AIC) Protection Mode
+#define AT91C_AIC_DCR_GMSK        (0x1 <<  1) // (AIC) General Mask
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
+// *****************************************************************************
+// *** Register offset in AT91S_PDC structure ***
+#define PDC_RPR         ( 0) // Receive Pointer Register
+#define PDC_RCR         ( 4) // Receive Counter Register
+#define PDC_TPR         ( 8) // Transmit Pointer Register
+#define PDC_TCR         (12) // Transmit Counter Register
+#define PDC_RNPR        (16) // Receive Next Pointer Register
+#define PDC_RNCR        (20) // Receive Next Counter Register
+#define PDC_TNPR        (24) // Transmit Next Pointer Register
+#define PDC_TNCR        (28) // Transmit Next Counter Register
+#define PDC_PTCR        (32) // PDC Transfer Control Register
+#define PDC_PTSR        (36) // PDC Transfer Status Register
+// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
+#define AT91C_PDC_RXTEN           (0x1 <<  0) // (PDC) Receiver Transfer Enable
+#define AT91C_PDC_RXTDIS          (0x1 <<  1) // (PDC) Receiver Transfer Disable
+#define AT91C_PDC_TXTEN           (0x1 <<  8) // (PDC) Transmitter Transfer Enable
+#define AT91C_PDC_TXTDIS          (0x1 <<  9) // (PDC) Transmitter Transfer Disable
+// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Debug Unit
+// *****************************************************************************
+// *** Register offset in AT91S_DBGU structure ***
+#define DBGU_CR         ( 0) // Control Register
+#define DBGU_MR         ( 4) // Mode Register
+#define DBGU_IER        ( 8) // Interrupt Enable Register
+#define DBGU_IDR        (12) // Interrupt Disable Register
+#define DBGU_IMR        (16) // Interrupt Mask Register
+#define DBGU_CSR        (20) // Channel Status Register
+#define DBGU_RHR        (24) // Receiver Holding Register
+#define DBGU_THR        (28) // Transmitter Holding Register
+#define DBGU_BRGR       (32) // Baud Rate Generator Register
+#define DBGU_CIDR       (64) // Chip ID Register
+#define DBGU_EXID       (68) // Chip ID Extension Register
+#define DBGU_FNTR       (72) // Force NTRST Register
+#define DBGU_RPR        (256) // Receive Pointer Register
+#define DBGU_RCR        (260) // Receive Counter Register
+#define DBGU_TPR        (264) // Transmit Pointer Register
+#define DBGU_TCR        (268) // Transmit Counter Register
+#define DBGU_RNPR       (272) // Receive Next Pointer Register
+#define DBGU_RNCR       (276) // Receive Next Counter Register
+#define DBGU_TNPR       (280) // Transmit Next Pointer Register
+#define DBGU_TNCR       (284) // Transmit Next Counter Register
+#define DBGU_PTCR       (288) // PDC Transfer Control Register
+#define DBGU_PTSR       (292) // PDC Transfer Status Register
+// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_RSTRX            (0x1 <<  2) // (DBGU) Reset Receiver
+#define AT91C_US_RSTTX            (0x1 <<  3) // (DBGU) Reset Transmitter
+#define AT91C_US_RXEN             (0x1 <<  4) // (DBGU) Receiver Enable
+#define AT91C_US_RXDIS            (0x1 <<  5) // (DBGU) Receiver Disable
+#define AT91C_US_TXEN             (0x1 <<  6) // (DBGU) Transmitter Enable
+#define AT91C_US_TXDIS            (0x1 <<  7) // (DBGU) Transmitter Disable
+#define AT91C_US_RSTSTA           (0x1 <<  8) // (DBGU) Reset Status Bits
+// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_PAR              (0x7 <<  9) // (DBGU) Parity type
+#define 	AT91C_US_PAR_EVEN                 (0x0 <<  9) // (DBGU) Even Parity
+#define 	AT91C_US_PAR_ODD                  (0x1 <<  9) // (DBGU) Odd Parity
+#define 	AT91C_US_PAR_SPACE                (0x2 <<  9) // (DBGU) Parity forced to 0 (Space)
+#define 	AT91C_US_PAR_MARK                 (0x3 <<  9) // (DBGU) Parity forced to 1 (Mark)
+#define 	AT91C_US_PAR_NONE                 (0x4 <<  9) // (DBGU) No Parity
+#define 	AT91C_US_PAR_MULTI_DROP           (0x6 <<  9) // (DBGU) Multi-drop mode
+#define AT91C_US_CHMODE           (0x3 << 14) // (DBGU) Channel Mode
+#define 	AT91C_US_CHMODE_NORMAL               (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+#define 	AT91C_US_CHMODE_AUTO                 (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+#define 	AT91C_US_CHMODE_LOCAL                (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+#define 	AT91C_US_CHMODE_REMOTE               (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXRDY            (0x1 <<  0) // (DBGU) RXRDY Interrupt
+#define AT91C_US_TXRDY            (0x1 <<  1) // (DBGU) TXRDY Interrupt
+#define AT91C_US_ENDRX            (0x1 <<  3) // (DBGU) End of Receive Transfer Interrupt
+#define AT91C_US_ENDTX            (0x1 <<  4) // (DBGU) End of Transmit Interrupt
+#define AT91C_US_OVRE             (0x1 <<  5) // (DBGU) Overrun Interrupt
+#define AT91C_US_FRAME            (0x1 <<  6) // (DBGU) Framing Error Interrupt
+#define AT91C_US_PARE             (0x1 <<  7) // (DBGU) Parity Error Interrupt
+#define AT91C_US_TXEMPTY          (0x1 <<  9) // (DBGU) TXEMPTY Interrupt
+#define AT91C_US_TXBUFE           (0x1 << 11) // (DBGU) TXBUFE Interrupt
+#define AT91C_US_RXBUFF           (0x1 << 12) // (DBGU) RXBUFF Interrupt
+#define AT91C_US_COMM_TX          (0x1 << 30) // (DBGU) COMM_TX Interrupt
+#define AT91C_US_COMM_RX          (0x1 << 31) // (DBGU) COMM_RX Interrupt
+// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
+// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
+#define AT91C_US_FORCE_NTRST      (0x1 <<  0) // (DBGU) Force NTRST in JTAG
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+// *****************************************************************************
+// *** Register offset in AT91S_PIO structure ***
+#define PIO_PER         ( 0) // PIO Enable Register
+#define PIO_PDR         ( 4) // PIO Disable Register
+#define PIO_PSR         ( 8) // PIO Status Register
+#define PIO_OER         (16) // Output Enable Register
+#define PIO_ODR         (20) // Output Disable Registerr
+#define PIO_OSR         (24) // Output Status Register
+#define PIO_IFER        (32) // Input Filter Enable Register
+#define PIO_IFDR        (36) // Input Filter Disable Register
+#define PIO_IFSR        (40) // Input Filter Status Register
+#define PIO_SODR        (48) // Set Output Data Register
+#define PIO_CODR        (52) // Clear Output Data Register
+#define PIO_ODSR        (56) // Output Data Status Register
+#define PIO_PDSR        (60) // Pin Data Status Register
+#define PIO_IER         (64) // Interrupt Enable Register
+#define PIO_IDR         (68) // Interrupt Disable Register
+#define PIO_IMR         (72) // Interrupt Mask Register
+#define PIO_ISR         (76) // Interrupt Status Register
+#define PIO_MDER        (80) // Multi-driver Enable Register
+#define PIO_MDDR        (84) // Multi-driver Disable Register
+#define PIO_MDSR        (88) // Multi-driver Status Register
+#define PIO_PPUDR       (96) // Pull-up Disable Register
+#define PIO_PPUER       (100) // Pull-up Enable Register
+#define PIO_PPUSR       (104) // Pull-up Status Register
+#define PIO_ASR         (112) // Select A Register
+#define PIO_BSR         (116) // Select B Register
+#define PIO_ABSR        (120) // AB Select Status Register
+#define PIO_OWER        (160) // Output Write Enable Register
+#define PIO_OWDR        (164) // Output Write Disable Register
+#define PIO_OWSR        (168) // Output Write Status Register
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+// *****************************************************************************
+// *** Register offset in AT91S_CKGR structure ***
+#define CKGR_MOR        ( 0) // Main Oscillator Register
+#define CKGR_MCFR       ( 4) // Main Clock  Frequency Register
+#define CKGR_PLLR       (12) // PLL Register
+// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
+#define AT91C_CKGR_MOSCEN         (0x1 <<  0) // (CKGR) Main Oscillator Enable
+#define AT91C_CKGR_OSCBYPASS      (0x1 <<  1) // (CKGR) Main Oscillator Bypass
+#define AT91C_CKGR_OSCOUNT        (0xFF <<  8) // (CKGR) Main Oscillator Start-up Time
+// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
+#define AT91C_CKGR_MAINF          (0xFFFF <<  0) // (CKGR) Main Clock Frequency
+#define AT91C_CKGR_MAINRDY        (0x1 << 16) // (CKGR) Main Clock Ready
+// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register -------- 
+#define AT91C_CKGR_DIV            (0xFF <<  0) // (CKGR) Divider Selected
+#define 	AT91C_CKGR_DIV_0                    (0x0) // (CKGR) Divider output is 0
+#define 	AT91C_CKGR_DIV_BYPASS               (0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLCOUNT       (0x3F <<  8) // (CKGR) PLL Counter
+#define AT91C_CKGR_OUT            (0x3 << 14) // (CKGR) PLL Output Frequency Range
+#define 	AT91C_CKGR_OUT_0                    (0x0 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_1                    (0x1 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_2                    (0x2 << 14) // (CKGR) Please refer to the PLL datasheet
+#define 	AT91C_CKGR_OUT_3                    (0x3 << 14) // (CKGR) Please refer to the PLL datasheet
+#define AT91C_CKGR_MUL            (0x7FF << 16) // (CKGR) PLL Multiplier
+#define AT91C_CKGR_USBDIV         (0x3 << 28) // (CKGR) Divider for USB Clocks
+#define 	AT91C_CKGR_USBDIV_0                    (0x0 << 28) // (CKGR) Divider output is PLL clock output
+#define 	AT91C_CKGR_USBDIV_1                    (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2
+#define 	AT91C_CKGR_USBDIV_2                    (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Power Management Controler
+// *****************************************************************************
+// *** Register offset in AT91S_PMC structure ***
+#define PMC_SCER        ( 0) // System Clock Enable Register
+#define PMC_SCDR        ( 4) // System Clock Disable Register
+#define PMC_SCSR        ( 8) // System Clock Status Register
+#define PMC_PCER        (16) // Peripheral Clock Enable Register
+#define PMC_PCDR        (20) // Peripheral Clock Disable Register
+#define PMC_PCSR        (24) // Peripheral Clock Status Register
+#define PMC_MOR         (32) // Main Oscillator Register
+#define PMC_MCFR        (36) // Main Clock  Frequency Register
+#define PMC_PLLR        (44) // PLL Register
+#define PMC_MCKR        (48) // Master Clock Register
+#define PMC_PCKR        (64) // Programmable Clock Register
+#define PMC_IER         (96) // Interrupt Enable Register
+#define PMC_IDR         (100) // Interrupt Disable Register
+#define PMC_SR          (104) // Status Register
+#define PMC_IMR         (108) // Interrupt Mask Register
+// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
+#define AT91C_PMC_PCK             (0x1 <<  0) // (PMC) Processor Clock
+#define AT91C_PMC_UDP             (0x1 <<  7) // (PMC) USB Device Port Clock
+#define AT91C_PMC_PCK0            (0x1 <<  8) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK1            (0x1 <<  9) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK2            (0x1 << 10) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK3            (0x1 << 11) // (PMC) Programmable Clock Output
+// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
+// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
+// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- 
+// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- 
+// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register -------- 
+// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
+#define AT91C_PMC_CSS             (0x3 <<  0) // (PMC) Programmable Clock Selection
+#define 	AT91C_PMC_CSS_SLOW_CLK             (0x0) // (PMC) Slow Clock is selected
+#define 	AT91C_PMC_CSS_MAIN_CLK             (0x1) // (PMC) Main Clock is selected
+#define 	AT91C_PMC_CSS_PLL_CLK              (0x3) // (PMC) Clock from PLL is selected
+#define AT91C_PMC_PRES            (0x7 <<  2) // (PMC) Programmable Clock Prescaler
+#define 	AT91C_PMC_PRES_CLK                  (0x0 <<  2) // (PMC) Selected clock
+#define 	AT91C_PMC_PRES_CLK_2                (0x1 <<  2) // (PMC) Selected clock divided by 2
+#define 	AT91C_PMC_PRES_CLK_4                (0x2 <<  2) // (PMC) Selected clock divided by 4
+#define 	AT91C_PMC_PRES_CLK_8                (0x3 <<  2) // (PMC) Selected clock divided by 8
+#define 	AT91C_PMC_PRES_CLK_16               (0x4 <<  2) // (PMC) Selected clock divided by 16
+#define 	AT91C_PMC_PRES_CLK_32               (0x5 <<  2) // (PMC) Selected clock divided by 32
+#define 	AT91C_PMC_PRES_CLK_64               (0x6 <<  2) // (PMC) Selected clock divided by 64
+// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
+// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
+#define AT91C_PMC_MOSCS           (0x1 <<  0) // (PMC) MOSC Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCK            (0x1 <<  2) // (PMC) PLL Status/Enable/Disable/Mask
+#define AT91C_PMC_MCKRDY          (0x1 <<  3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK0RDY         (0x1 <<  8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK1RDY         (0x1 <<  9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK2RDY         (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK3RDY         (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
+// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
+// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
+// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Reset Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_RSTC structure ***
+#define RSTC_RCR        ( 0) // Reset Control Register
+#define RSTC_RSR        ( 4) // Reset Status Register
+#define RSTC_RMR        ( 8) // Reset Mode Register
+// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- 
+#define AT91C_RSTC_PROCRST        (0x1 <<  0) // (RSTC) Processor Reset
+#define AT91C_RSTC_PERRST         (0x1 <<  2) // (RSTC) Peripheral Reset
+#define AT91C_RSTC_EXTRST         (0x1 <<  3) // (RSTC) External Reset
+#define AT91C_RSTC_KEY            (0xFF << 24) // (RSTC) Password
+// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- 
+#define AT91C_RSTC_URSTS          (0x1 <<  0) // (RSTC) User Reset Status
+#define AT91C_RSTC_BODSTS         (0x1 <<  1) // (RSTC) Brownout Detection Status
+#define AT91C_RSTC_RSTTYP         (0x7 <<  8) // (RSTC) Reset Type
+#define 	AT91C_RSTC_RSTTYP_POWERUP              (0x0 <<  8) // (RSTC) Power-up Reset. VDDCORE rising.
+#define 	AT91C_RSTC_RSTTYP_WAKEUP               (0x1 <<  8) // (RSTC) WakeUp Reset. VDDCORE rising.
+#define 	AT91C_RSTC_RSTTYP_WATCHDOG             (0x2 <<  8) // (RSTC) Watchdog Reset. Watchdog overflow occured.
+#define 	AT91C_RSTC_RSTTYP_SOFTWARE             (0x3 <<  8) // (RSTC) Software Reset. Processor reset required by the software.
+#define 	AT91C_RSTC_RSTTYP_USER                 (0x4 <<  8) // (RSTC) User Reset. NRST pin detected low.
+#define 	AT91C_RSTC_RSTTYP_BROWNOUT             (0x5 <<  8) // (RSTC) Brownout Reset occured.
+#define AT91C_RSTC_NRSTL          (0x1 << 16) // (RSTC) NRST pin level
+#define AT91C_RSTC_SRCMP          (0x1 << 17) // (RSTC) Software Reset Command in Progress.
+// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- 
+#define AT91C_RSTC_URSTEN         (0x1 <<  0) // (RSTC) User Reset Enable
+#define AT91C_RSTC_URSTIEN        (0x1 <<  4) // (RSTC) User Reset Interrupt Enable
+#define AT91C_RSTC_ERSTL          (0xF <<  8) // (RSTC) User Reset Length
+#define AT91C_RSTC_BODIEN         (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_RTTC structure ***
+#define RTTC_RTMR       ( 0) // Real-time Mode Register
+#define RTTC_RTAR       ( 4) // Real-time Alarm Register
+#define RTTC_RTVR       ( 8) // Real-time Value Register
+#define RTTC_RTSR       (12) // Real-time Status Register
+// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- 
+#define AT91C_RTTC_RTPRES         (0xFFFF <<  0) // (RTTC) Real-time Timer Prescaler Value
+#define AT91C_RTTC_ALMIEN         (0x1 << 16) // (RTTC) Alarm Interrupt Enable
+#define AT91C_RTTC_RTTINCIEN      (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable
+#define AT91C_RTTC_RTTRST         (0x1 << 18) // (RTTC) Real Time Timer Restart
+// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- 
+#define AT91C_RTTC_ALMV           (0x0 <<  0) // (RTTC) Alarm Value
+// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- 
+#define AT91C_RTTC_CRTV           (0x0 <<  0) // (RTTC) Current Real-time Value
+// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- 
+#define AT91C_RTTC_ALMS           (0x1 <<  0) // (RTTC) Real-time Alarm Status
+#define AT91C_RTTC_RTTINC         (0x1 <<  1) // (RTTC) Real-time Timer Increment
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_PITC structure ***
+#define PITC_PIMR       ( 0) // Period Interval Mode Register
+#define PITC_PISR       ( 4) // Period Interval Status Register
+#define PITC_PIVR       ( 8) // Period Interval Value Register
+#define PITC_PIIR       (12) // Period Interval Image Register
+// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- 
+#define AT91C_PITC_PIV            (0xFFFFF <<  0) // (PITC) Periodic Interval Value
+#define AT91C_PITC_PITEN          (0x1 << 24) // (PITC) Periodic Interval Timer Enabled
+#define AT91C_PITC_PITIEN         (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable
+// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- 
+#define AT91C_PITC_PITS           (0x1 <<  0) // (PITC) Periodic Interval Timer Status
+// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- 
+#define AT91C_PITC_CPIV           (0xFFFFF <<  0) // (PITC) Current Periodic Interval Value
+#define AT91C_PITC_PICNT          (0xFFF << 20) // (PITC) Periodic Interval Counter
+// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_WDTC structure ***
+#define WDTC_WDCR       ( 0) // Watchdog Control Register
+#define WDTC_WDMR       ( 4) // Watchdog Mode Register
+#define WDTC_WDSR       ( 8) // Watchdog Status Register
+// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- 
+#define AT91C_WDTC_WDRSTT         (0x1 <<  0) // (WDTC) Watchdog Restart
+#define AT91C_WDTC_KEY            (0xFF << 24) // (WDTC) Watchdog KEY Password
+// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- 
+#define AT91C_WDTC_WDV            (0xFFF <<  0) // (WDTC) Watchdog Timer Restart
+#define AT91C_WDTC_WDFIEN         (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable
+#define AT91C_WDTC_WDRSTEN        (0x1 << 13) // (WDTC) Watchdog Reset Enable
+#define AT91C_WDTC_WDRPROC        (0x1 << 14) // (WDTC) Watchdog Timer Restart
+#define AT91C_WDTC_WDDIS          (0x1 << 15) // (WDTC) Watchdog Disable
+#define AT91C_WDTC_WDD            (0xFFF << 16) // (WDTC) Watchdog Delta Value
+#define AT91C_WDTC_WDDBGHLT       (0x1 << 28) // (WDTC) Watchdog Debug Halt
+#define AT91C_WDTC_WDIDLEHLT      (0x1 << 29) // (WDTC) Watchdog Idle Halt
+// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- 
+#define AT91C_WDTC_WDUNF          (0x1 <<  0) // (WDTC) Watchdog Underflow
+#define AT91C_WDTC_WDERR          (0x1 <<  1) // (WDTC) Watchdog Error
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_VREG structure ***
+#define VREG_MR         ( 0) // Voltage Regulator Mode Register
+// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- 
+#define AT91C_VREG_PSTDBY         (0x1 <<  0) // (VREG) Voltage Regulator Power Standby Mode
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_MC structure ***
+#define MC_RCR          ( 0) // MC Remap Control Register
+#define MC_ASR          ( 4) // MC Abort Status Register
+#define MC_AASR         ( 8) // MC Abort Address Status Register
+#define MC_FMR          (96) // MC Flash Mode Register
+#define MC_FCR          (100) // MC Flash Command Register
+#define MC_FSR          (104) // MC Flash Status Register
+// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
+#define AT91C_MC_RCB              (0x1 <<  0) // (MC) Remap Command Bit
+// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
+#define AT91C_MC_UNDADD           (0x1 <<  0) // (MC) Undefined Addess Abort Status
+#define AT91C_MC_MISADD           (0x1 <<  1) // (MC) Misaligned Addess Abort Status
+#define AT91C_MC_ABTSZ            (0x3 <<  8) // (MC) Abort Size Status
+#define 	AT91C_MC_ABTSZ_BYTE                 (0x0 <<  8) // (MC) Byte
+#define 	AT91C_MC_ABTSZ_HWORD                (0x1 <<  8) // (MC) Half-word
+#define 	AT91C_MC_ABTSZ_WORD                 (0x2 <<  8) // (MC) Word
+#define AT91C_MC_ABTTYP           (0x3 << 10) // (MC) Abort Type Status
+#define 	AT91C_MC_ABTTYP_DATAR                (0x0 << 10) // (MC) Data Read
+#define 	AT91C_MC_ABTTYP_DATAW                (0x1 << 10) // (MC) Data Write
+#define 	AT91C_MC_ABTTYP_FETCH                (0x2 << 10) // (MC) Code Fetch
+#define AT91C_MC_MST0             (0x1 << 16) // (MC) Master 0 Abort Source
+#define AT91C_MC_MST1             (0x1 << 17) // (MC) Master 1 Abort Source
+#define AT91C_MC_SVMST0           (0x1 << 24) // (MC) Saved Master 0 Abort Source
+#define AT91C_MC_SVMST1           (0x1 << 25) // (MC) Saved Master 1 Abort Source
+// -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register -------- 
+#define AT91C_MC_FRDY             (0x1 <<  0) // (MC) Flash Ready
+#define AT91C_MC_LOCKE            (0x1 <<  2) // (MC) Lock Error
+#define AT91C_MC_PROGE            (0x1 <<  3) // (MC) Programming Error
+#define AT91C_MC_NEBP             (0x1 <<  7) // (MC) No Erase Before Programming
+#define AT91C_MC_FWS              (0x3 <<  8) // (MC) Flash Wait State
+#define 	AT91C_MC_FWS_0FWS                 (0x0 <<  8) // (MC) 1 cycle for Read, 2 for Write operations
+#define 	AT91C_MC_FWS_1FWS                 (0x1 <<  8) // (MC) 2 cycles for Read, 3 for Write operations
+#define 	AT91C_MC_FWS_2FWS                 (0x2 <<  8) // (MC) 3 cycles for Read, 4 for Write operations
+#define 	AT91C_MC_FWS_3FWS                 (0x3 <<  8) // (MC) 4 cycles for Read, 4 for Write operations
+#define AT91C_MC_FMCN             (0xFF << 16) // (MC) Flash Microsecond Cycle Number
+// -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register -------- 
+#define AT91C_MC_FCMD             (0xF <<  0) // (MC) Flash Command
+#define 	AT91C_MC_FCMD_START_PROG           (0x1) // (MC) Starts the programming of th epage specified by PAGEN.
+#define 	AT91C_MC_FCMD_LOCK                 (0x2) // (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+#define 	AT91C_MC_FCMD_PROG_AND_LOCK        (0x3) // (MC) The lock sequence automatically happens after the programming sequence is completed.
+#define 	AT91C_MC_FCMD_UNLOCK               (0x4) // (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+#define 	AT91C_MC_FCMD_ERASE_ALL            (0x8) // (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
+#define 	AT91C_MC_FCMD_SET_GP_NVM           (0xB) // (MC) Set General Purpose NVM bits.
+#define 	AT91C_MC_FCMD_CLR_GP_NVM           (0xD) // (MC) Clear General Purpose NVM bits.
+#define 	AT91C_MC_FCMD_SET_SECURITY         (0xF) // (MC) Set Security Bit.
+#define AT91C_MC_PAGEN            (0x3FF <<  8) // (MC) Page Number
+#define AT91C_MC_KEY              (0xFF << 24) // (MC) Writing Protect Key
+// -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register -------- 
+#define AT91C_MC_SECURITY         (0x1 <<  4) // (MC) Security Bit Status
+#define AT91C_MC_GPNVM0           (0x1 <<  8) // (MC) Sector 0 Lock Status
+#define AT91C_MC_GPNVM1           (0x1 <<  9) // (MC) Sector 1 Lock Status
+#define AT91C_MC_GPNVM2           (0x1 << 10) // (MC) Sector 2 Lock Status
+#define AT91C_MC_GPNVM3           (0x1 << 11) // (MC) Sector 3 Lock Status
+#define AT91C_MC_GPNVM4           (0x1 << 12) // (MC) Sector 4 Lock Status
+#define AT91C_MC_GPNVM5           (0x1 << 13) // (MC) Sector 5 Lock Status
+#define AT91C_MC_GPNVM6           (0x1 << 14) // (MC) Sector 6 Lock Status
+#define AT91C_MC_GPNVM7           (0x1 << 15) // (MC) Sector 7 Lock Status
+#define AT91C_MC_LOCKS0           (0x1 << 16) // (MC) Sector 0 Lock Status
+#define AT91C_MC_LOCKS1           (0x1 << 17) // (MC) Sector 1 Lock Status
+#define AT91C_MC_LOCKS2           (0x1 << 18) // (MC) Sector 2 Lock Status
+#define AT91C_MC_LOCKS3           (0x1 << 19) // (MC) Sector 3 Lock Status
+#define AT91C_MC_LOCKS4           (0x1 << 20) // (MC) Sector 4 Lock Status
+#define AT91C_MC_LOCKS5           (0x1 << 21) // (MC) Sector 5 Lock Status
+#define AT91C_MC_LOCKS6           (0x1 << 22) // (MC) Sector 6 Lock Status
+#define AT91C_MC_LOCKS7           (0x1 << 23) // (MC) Sector 7 Lock Status
+#define AT91C_MC_LOCKS8           (0x1 << 24) // (MC) Sector 8 Lock Status
+#define AT91C_MC_LOCKS9           (0x1 << 25) // (MC) Sector 9 Lock Status
+#define AT91C_MC_LOCKS10          (0x1 << 26) // (MC) Sector 10 Lock Status
+#define AT91C_MC_LOCKS11          (0x1 << 27) // (MC) Sector 11 Lock Status
+#define AT91C_MC_LOCKS12          (0x1 << 28) // (MC) Sector 12 Lock Status
+#define AT91C_MC_LOCKS13          (0x1 << 29) // (MC) Sector 13 Lock Status
+#define AT91C_MC_LOCKS14          (0x1 << 30) // (MC) Sector 14 Lock Status
+#define AT91C_MC_LOCKS15          (0x1 << 31) // (MC) Sector 15 Lock Status
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SPI structure ***
+#define SPI_CR          ( 0) // Control Register
+#define SPI_MR          ( 4) // Mode Register
+#define SPI_RDR         ( 8) // Receive Data Register
+#define SPI_TDR         (12) // Transmit Data Register
+#define SPI_SR          (16) // Status Register
+#define SPI_IER         (20) // Interrupt Enable Register
+#define SPI_IDR         (24) // Interrupt Disable Register
+#define SPI_IMR         (28) // Interrupt Mask Register
+#define SPI_CSR         (48) // Chip Select Register
+#define SPI_RPR         (256) // Receive Pointer Register
+#define SPI_RCR         (260) // Receive Counter Register
+#define SPI_TPR         (264) // Transmit Pointer Register
+#define SPI_TCR         (268) // Transmit Counter Register
+#define SPI_RNPR        (272) // Receive Next Pointer Register
+#define SPI_RNCR        (276) // Receive Next Counter Register
+#define SPI_TNPR        (280) // Transmit Next Pointer Register
+#define SPI_TNCR        (284) // Transmit Next Counter Register
+#define SPI_PTCR        (288) // PDC Transfer Control Register
+#define SPI_PTSR        (292) // PDC Transfer Status Register
+// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
+#define AT91C_SPI_SPIEN           (0x1 <<  0) // (SPI) SPI Enable
+#define AT91C_SPI_SPIDIS          (0x1 <<  1) // (SPI) SPI Disable
+#define AT91C_SPI_SWRST           (0x1 <<  7) // (SPI) SPI Software reset
+#define AT91C_SPI_LASTXFER        (0x1 << 24) // (SPI) SPI Last Transfer
+// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
+#define AT91C_SPI_MSTR            (0x1 <<  0) // (SPI) Master/Slave Mode
+#define AT91C_SPI_PS              (0x1 <<  1) // (SPI) Peripheral Select
+#define 	AT91C_SPI_PS_FIXED                (0x0 <<  1) // (SPI) Fixed Peripheral Select
+#define 	AT91C_SPI_PS_VARIABLE             (0x1 <<  1) // (SPI) Variable Peripheral Select
+#define AT91C_SPI_PCSDEC          (0x1 <<  2) // (SPI) Chip Select Decode
+#define AT91C_SPI_FDIV            (0x1 <<  3) // (SPI) Clock Selection
+#define AT91C_SPI_MODFDIS         (0x1 <<  4) // (SPI) Mode Fault Detection
+#define AT91C_SPI_LLB             (0x1 <<  7) // (SPI) Clock Selection
+#define AT91C_SPI_PCS             (0xF << 16) // (SPI) Peripheral Chip Select
+#define AT91C_SPI_DLYBCS          (0xFF << 24) // (SPI) Delay Between Chip Selects
+// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
+#define AT91C_SPI_RD              (0xFFFF <<  0) // (SPI) Receive Data
+#define AT91C_SPI_RPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
+#define AT91C_SPI_TD              (0xFFFF <<  0) // (SPI) Transmit Data
+#define AT91C_SPI_TPCS            (0xF << 16) // (SPI) Peripheral Chip Select Status
+// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
+#define AT91C_SPI_RDRF            (0x1 <<  0) // (SPI) Receive Data Register Full
+#define AT91C_SPI_TDRE            (0x1 <<  1) // (SPI) Transmit Data Register Empty
+#define AT91C_SPI_MODF            (0x1 <<  2) // (SPI) Mode Fault Error
+#define AT91C_SPI_OVRES           (0x1 <<  3) // (SPI) Overrun Error Status
+#define AT91C_SPI_ENDRX           (0x1 <<  4) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_ENDTX           (0x1 <<  5) // (SPI) End of Receiver Transfer
+#define AT91C_SPI_RXBUFF          (0x1 <<  6) // (SPI) RXBUFF Interrupt
+#define AT91C_SPI_TXBUFE          (0x1 <<  7) // (SPI) TXBUFE Interrupt
+#define AT91C_SPI_NSSR            (0x1 <<  8) // (SPI) NSSR Interrupt
+#define AT91C_SPI_TXEMPTY         (0x1 <<  9) // (SPI) TXEMPTY Interrupt
+#define AT91C_SPI_SPIENS          (0x1 << 16) // (SPI) Enable Status
+// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
+// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
+// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
+// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
+#define AT91C_SPI_CPOL            (0x1 <<  0) // (SPI) Clock Polarity
+#define AT91C_SPI_NCPHA           (0x1 <<  1) // (SPI) Clock Phase
+#define AT91C_SPI_CSAAT           (0x1 <<  3) // (SPI) Chip Select Active After Transfer
+#define AT91C_SPI_BITS            (0xF <<  4) // (SPI) Bits Per Transfer
+#define 	AT91C_SPI_BITS_8                    (0x0 <<  4) // (SPI) 8 Bits Per transfer
+#define 	AT91C_SPI_BITS_9                    (0x1 <<  4) // (SPI) 9 Bits Per transfer
+#define 	AT91C_SPI_BITS_10                   (0x2 <<  4) // (SPI) 10 Bits Per transfer
+#define 	AT91C_SPI_BITS_11                   (0x3 <<  4) // (SPI) 11 Bits Per transfer
+#define 	AT91C_SPI_BITS_12                   (0x4 <<  4) // (SPI) 12 Bits Per transfer
+#define 	AT91C_SPI_BITS_13                   (0x5 <<  4) // (SPI) 13 Bits Per transfer
+#define 	AT91C_SPI_BITS_14                   (0x6 <<  4) // (SPI) 14 Bits Per transfer
+#define 	AT91C_SPI_BITS_15                   (0x7 <<  4) // (SPI) 15 Bits Per transfer
+#define 	AT91C_SPI_BITS_16                   (0x8 <<  4) // (SPI) 16 Bits Per transfer
+#define AT91C_SPI_SCBR            (0xFF <<  8) // (SPI) Serial Clock Baud Rate
+#define AT91C_SPI_DLYBS           (0xFF << 16) // (SPI) Delay Before SPCK
+#define AT91C_SPI_DLYBCT          (0xFF << 24) // (SPI) Delay Between Consecutive Transfers
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Usart
+// *****************************************************************************
+// *** Register offset in AT91S_USART structure ***
+#define US_CR           ( 0) // Control Register
+#define US_MR           ( 4) // Mode Register
+#define US_IER          ( 8) // Interrupt Enable Register
+#define US_IDR          (12) // Interrupt Disable Register
+#define US_IMR          (16) // Interrupt Mask Register
+#define US_CSR          (20) // Channel Status Register
+#define US_RHR          (24) // Receiver Holding Register
+#define US_THR          (28) // Transmitter Holding Register
+#define US_BRGR         (32) // Baud Rate Generator Register
+#define US_RTOR         (36) // Receiver Time-out Register
+#define US_TTGR         (40) // Transmitter Time-guard Register
+#define US_FIDI         (64) // FI_DI_Ratio Register
+#define US_NER          (68) // Nb Errors Register
+#define US_IF           (76) // IRDA_FILTER Register
+#define US_RPR          (256) // Receive Pointer Register
+#define US_RCR          (260) // Receive Counter Register
+#define US_TPR          (264) // Transmit Pointer Register
+#define US_TCR          (268) // Transmit Counter Register
+#define US_RNPR         (272) // Receive Next Pointer Register
+#define US_RNCR         (276) // Receive Next Counter Register
+#define US_TNPR         (280) // Transmit Next Pointer Register
+#define US_TNCR         (284) // Transmit Next Counter Register
+#define US_PTCR         (288) // PDC Transfer Control Register
+#define US_PTSR         (292) // PDC Transfer Status Register
+// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
+#define AT91C_US_STTBRK           (0x1 <<  9) // (USART) Start Break
+#define AT91C_US_STPBRK           (0x1 << 10) // (USART) Stop Break
+#define AT91C_US_STTTO            (0x1 << 11) // (USART) Start Time-out
+#define AT91C_US_SENDA            (0x1 << 12) // (USART) Send Address
+#define AT91C_US_RSTIT            (0x1 << 13) // (USART) Reset Iterations
+#define AT91C_US_RSTNACK          (0x1 << 14) // (USART) Reset Non Acknowledge
+#define AT91C_US_RETTO            (0x1 << 15) // (USART) Rearm Time-out
+#define AT91C_US_DTREN            (0x1 << 16) // (USART) Data Terminal ready Enable
+#define AT91C_US_DTRDIS           (0x1 << 17) // (USART) Data Terminal ready Disable
+#define AT91C_US_RTSEN            (0x1 << 18) // (USART) Request to Send enable
+#define AT91C_US_RTSDIS           (0x1 << 19) // (USART) Request to Send Disable
+// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
+#define AT91C_US_USMODE           (0xF <<  0) // (USART) Usart mode
+#define 	AT91C_US_USMODE_NORMAL               (0x0) // (USART) Normal
+#define 	AT91C_US_USMODE_RS485                (0x1) // (USART) RS485
+#define 	AT91C_US_USMODE_HWHSH                (0x2) // (USART) Hardware Handshaking
+#define 	AT91C_US_USMODE_MODEM                (0x3) // (USART) Modem
+#define 	AT91C_US_USMODE_ISO7816_0            (0x4) // (USART) ISO7816 protocol: T = 0
+#define 	AT91C_US_USMODE_ISO7816_1            (0x6) // (USART) ISO7816 protocol: T = 1
+#define 	AT91C_US_USMODE_IRDA                 (0x8) // (USART) IrDA
+#define 	AT91C_US_USMODE_SWHSH                (0xC) // (USART) Software Handshaking
+#define AT91C_US_CLKS             (0x3 <<  4) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CLKS_CLOCK                (0x0 <<  4) // (USART) Clock
+#define 	AT91C_US_CLKS_FDIV1                (0x1 <<  4) // (USART) fdiv1
+#define 	AT91C_US_CLKS_SLOW                 (0x2 <<  4) // (USART) slow_clock (ARM)
+#define 	AT91C_US_CLKS_EXT                  (0x3 <<  4) // (USART) External (SCK)
+#define AT91C_US_CHRL             (0x3 <<  6) // (USART) Clock Selection (Baud Rate generator Input Clock
+#define 	AT91C_US_CHRL_5_BITS               (0x0 <<  6) // (USART) Character Length: 5 bits
+#define 	AT91C_US_CHRL_6_BITS               (0x1 <<  6) // (USART) Character Length: 6 bits
+#define 	AT91C_US_CHRL_7_BITS               (0x2 <<  6) // (USART) Character Length: 7 bits
+#define 	AT91C_US_CHRL_8_BITS               (0x3 <<  6) // (USART) Character Length: 8 bits
+#define AT91C_US_SYNC             (0x1 <<  8) // (USART) Synchronous Mode Select
+#define AT91C_US_NBSTOP           (0x3 << 12) // (USART) Number of Stop bits
+#define 	AT91C_US_NBSTOP_1_BIT                (0x0 << 12) // (USART) 1 stop bit
+#define 	AT91C_US_NBSTOP_15_BIT               (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+#define 	AT91C_US_NBSTOP_2_BIT                (0x2 << 12) // (USART) 2 stop bits
+#define AT91C_US_MSBF             (0x1 << 16) // (USART) Bit Order
+#define AT91C_US_MODE9            (0x1 << 17) // (USART) 9-bit Character length
+#define AT91C_US_CKLO             (0x1 << 18) // (USART) Clock Output Select
+#define AT91C_US_OVER             (0x1 << 19) // (USART) Over Sampling Mode
+#define AT91C_US_INACK            (0x1 << 20) // (USART) Inhibit Non Acknowledge
+#define AT91C_US_DSNACK           (0x1 << 21) // (USART) Disable Successive NACK
+#define AT91C_US_MAX_ITER         (0x1 << 24) // (USART) Number of Repetitions
+#define AT91C_US_FILTER           (0x1 << 28) // (USART) Receive Line Filter
+// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+#define AT91C_US_RXBRK            (0x1 <<  2) // (USART) Break Received/End of Break
+#define AT91C_US_TIMEOUT          (0x1 <<  8) // (USART) Receiver Time-out
+#define AT91C_US_ITERATION        (0x1 << 10) // (USART) Max number of Repetitions Reached
+#define AT91C_US_NACK             (0x1 << 13) // (USART) Non Acknowledge
+#define AT91C_US_RIIC             (0x1 << 16) // (USART) Ring INdicator Input Change Flag
+#define AT91C_US_DSRIC            (0x1 << 17) // (USART) Data Set Ready Input Change Flag
+#define AT91C_US_DCDIC            (0x1 << 18) // (USART) Data Carrier Flag
+#define AT91C_US_CTSIC            (0x1 << 19) // (USART) Clear To Send Input Change Flag
+// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
+#define AT91C_US_RI               (0x1 << 20) // (USART) Image of RI Input
+#define AT91C_US_DSR              (0x1 << 21) // (USART) Image of DSR Input
+#define AT91C_US_DCD              (0x1 << 22) // (USART) Image of DCD Input
+#define AT91C_US_CTS              (0x1 << 23) // (USART) Image of CTS Input
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_SSC structure ***
+#define SSC_CR          ( 0) // Control Register
+#define SSC_CMR         ( 4) // Clock Mode Register
+#define SSC_RCMR        (16) // Receive Clock ModeRegister
+#define SSC_RFMR        (20) // Receive Frame Mode Register
+#define SSC_TCMR        (24) // Transmit Clock Mode Register
+#define SSC_TFMR        (28) // Transmit Frame Mode Register
+#define SSC_RHR         (32) // Receive Holding Register
+#define SSC_THR         (36) // Transmit Holding Register
+#define SSC_RSHR        (48) // Receive Sync Holding Register
+#define SSC_TSHR        (52) // Transmit Sync Holding Register
+#define SSC_SR          (64) // Status Register
+#define SSC_IER         (68) // Interrupt Enable Register
+#define SSC_IDR         (72) // Interrupt Disable Register
+#define SSC_IMR         (76) // Interrupt Mask Register
+#define SSC_RPR         (256) // Receive Pointer Register
+#define SSC_RCR         (260) // Receive Counter Register
+#define SSC_TPR         (264) // Transmit Pointer Register
+#define SSC_TCR         (268) // Transmit Counter Register
+#define SSC_RNPR        (272) // Receive Next Pointer Register
+#define SSC_RNCR        (276) // Receive Next Counter Register
+#define SSC_TNPR        (280) // Transmit Next Pointer Register
+#define SSC_TNCR        (284) // Transmit Next Counter Register
+#define SSC_PTCR        (288) // PDC Transfer Control Register
+#define SSC_PTSR        (292) // PDC Transfer Status Register
+// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
+#define AT91C_SSC_RXEN            (0x1 <<  0) // (SSC) Receive Enable
+#define AT91C_SSC_RXDIS           (0x1 <<  1) // (SSC) Receive Disable
+#define AT91C_SSC_TXEN            (0x1 <<  8) // (SSC) Transmit Enable
+#define AT91C_SSC_TXDIS           (0x1 <<  9) // (SSC) Transmit Disable
+#define AT91C_SSC_SWRST           (0x1 << 15) // (SSC) Software Reset
+// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
+#define AT91C_SSC_CKS             (0x3 <<  0) // (SSC) Receive/Transmit Clock Selection
+#define 	AT91C_SSC_CKS_DIV                  (0x0) // (SSC) Divided Clock
+#define 	AT91C_SSC_CKS_TK                   (0x1) // (SSC) TK Clock signal
+#define 	AT91C_SSC_CKS_RK                   (0x2) // (SSC) RK pin
+#define AT91C_SSC_CKO             (0x7 <<  2) // (SSC) Receive/Transmit Clock Output Mode Selection
+#define 	AT91C_SSC_CKO_NONE                 (0x0 <<  2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+#define 	AT91C_SSC_CKO_CONTINOUS            (0x1 <<  2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
+#define 	AT91C_SSC_CKO_DATA_TX              (0x2 <<  2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+#define AT91C_SSC_CKI             (0x1 <<  5) // (SSC) Receive/Transmit Clock Inversion
+#define AT91C_SSC_CKG             (0x3 <<  6) // (SSC) Receive/Transmit Clock Gating Selection
+#define 	AT91C_SSC_CKG_NONE                 (0x0 <<  6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock
+#define 	AT91C_SSC_CKG_LOW                  (0x1 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF Low
+#define 	AT91C_SSC_CKG_HIGH                 (0x2 <<  6) // (SSC) Receive/Transmit Clock enabled only if RF High
+#define AT91C_SSC_START           (0xF <<  8) // (SSC) Receive/Transmit Start Selection
+#define 	AT91C_SSC_START_CONTINOUS            (0x0 <<  8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+#define 	AT91C_SSC_START_TX                   (0x1 <<  8) // (SSC) Transmit/Receive start
+#define 	AT91C_SSC_START_LOW_RF               (0x2 <<  8) // (SSC) Detection of a low level on RF input
+#define 	AT91C_SSC_START_HIGH_RF              (0x3 <<  8) // (SSC) Detection of a high level on RF input
+#define 	AT91C_SSC_START_FALL_RF              (0x4 <<  8) // (SSC) Detection of a falling edge on RF input
+#define 	AT91C_SSC_START_RISE_RF              (0x5 <<  8) // (SSC) Detection of a rising edge on RF input
+#define 	AT91C_SSC_START_LEVEL_RF             (0x6 <<  8) // (SSC) Detection of any level change on RF input
+#define 	AT91C_SSC_START_EDGE_RF              (0x7 <<  8) // (SSC) Detection of any edge on RF input
+#define 	AT91C_SSC_START_0                    (0x8 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_STOP            (0x1 << 12) // (SSC) Receive Stop Selection
+#define AT91C_SSC_STTDLY          (0xFF << 16) // (SSC) Receive/Transmit Start Delay
+#define AT91C_SSC_PERIOD          (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
+// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
+#define AT91C_SSC_DATLEN          (0x1F <<  0) // (SSC) Data Length
+#define AT91C_SSC_LOOP            (0x1 <<  5) // (SSC) Loop Mode
+#define AT91C_SSC_MSBF            (0x1 <<  7) // (SSC) Most Significant Bit First
+#define AT91C_SSC_DATNB           (0xF <<  8) // (SSC) Data Number per Frame
+#define AT91C_SSC_FSLEN           (0xF << 16) // (SSC) Receive/Transmit Frame Sync length
+#define AT91C_SSC_FSOS            (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
+#define 	AT91C_SSC_FSOS_NONE                 (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+#define 	AT91C_SSC_FSOS_NEGATIVE             (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+#define 	AT91C_SSC_FSOS_POSITIVE             (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+#define 	AT91C_SSC_FSOS_LOW                  (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+#define 	AT91C_SSC_FSOS_HIGH                 (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+#define 	AT91C_SSC_FSOS_TOGGLE               (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+#define AT91C_SSC_FSEDGE          (0x1 << 24) // (SSC) Frame Sync Edge Detection
+// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
+// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
+#define AT91C_SSC_DATDEF          (0x1 <<  5) // (SSC) Data Default Value
+#define AT91C_SSC_FSDEN           (0x1 << 23) // (SSC) Frame Sync Data Enable
+// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
+#define AT91C_SSC_TXRDY           (0x1 <<  0) // (SSC) Transmit Ready
+#define AT91C_SSC_TXEMPTY         (0x1 <<  1) // (SSC) Transmit Empty
+#define AT91C_SSC_ENDTX           (0x1 <<  2) // (SSC) End Of Transmission
+#define AT91C_SSC_TXBUFE          (0x1 <<  3) // (SSC) Transmit Buffer Empty
+#define AT91C_SSC_RXRDY           (0x1 <<  4) // (SSC) Receive Ready
+#define AT91C_SSC_OVRUN           (0x1 <<  5) // (SSC) Receive Overrun
+#define AT91C_SSC_ENDRX           (0x1 <<  6) // (SSC) End of Reception
+#define AT91C_SSC_RXBUFF          (0x1 <<  7) // (SSC) Receive Buffer Full
+#define AT91C_SSC_CP0             (0x1 <<  8) // (SSC) Compare 0
+#define AT91C_SSC_CP1             (0x1 <<  9) // (SSC) Compare 1
+#define AT91C_SSC_TXSYN           (0x1 << 10) // (SSC) Transmit Sync
+#define AT91C_SSC_RXSYN           (0x1 << 11) // (SSC) Receive Sync
+#define AT91C_SSC_TXENA           (0x1 << 16) // (SSC) Transmit Enable
+#define AT91C_SSC_RXENA           (0x1 << 17) // (SSC) Receive Enable
+// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
+// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
+// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Two-wire Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TWI structure ***
+#define TWI_CR          ( 0) // Control Register
+#define TWI_MMR         ( 4) // Master Mode Register
+#define TWI_IADR        (12) // Internal Address Register
+#define TWI_CWGR        (16) // Clock Waveform Generator Register
+#define TWI_SR          (32) // Status Register
+#define TWI_IER         (36) // Interrupt Enable Register
+#define TWI_IDR         (40) // Interrupt Disable Register
+#define TWI_IMR         (44) // Interrupt Mask Register
+#define TWI_RHR         (48) // Receive Holding Register
+#define TWI_THR         (52) // Transmit Holding Register
+// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
+#define AT91C_TWI_START           (0x1 <<  0) // (TWI) Send a START Condition
+#define AT91C_TWI_STOP            (0x1 <<  1) // (TWI) Send a STOP Condition
+#define AT91C_TWI_MSEN            (0x1 <<  2) // (TWI) TWI Master Transfer Enabled
+#define AT91C_TWI_MSDIS           (0x1 <<  3) // (TWI) TWI Master Transfer Disabled
+#define AT91C_TWI_SWRST           (0x1 <<  7) // (TWI) Software Reset
+// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
+#define AT91C_TWI_IADRSZ          (0x3 <<  8) // (TWI) Internal Device Address Size
+#define 	AT91C_TWI_IADRSZ_NO                   (0x0 <<  8) // (TWI) No internal device address
+#define 	AT91C_TWI_IADRSZ_1_BYTE               (0x1 <<  8) // (TWI) One-byte internal device address
+#define 	AT91C_TWI_IADRSZ_2_BYTE               (0x2 <<  8) // (TWI) Two-byte internal device address
+#define 	AT91C_TWI_IADRSZ_3_BYTE               (0x3 <<  8) // (TWI) Three-byte internal device address
+#define AT91C_TWI_MREAD           (0x1 << 12) // (TWI) Master Read Direction
+#define AT91C_TWI_DADR            (0x7F << 16) // (TWI) Device Address
+// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
+#define AT91C_TWI_CLDIV           (0xFF <<  0) // (TWI) Clock Low Divider
+#define AT91C_TWI_CHDIV           (0xFF <<  8) // (TWI) Clock High Divider
+#define AT91C_TWI_CKDIV           (0x7 << 16) // (TWI) Clock Divider
+// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
+#define AT91C_TWI_TXCOMP          (0x1 <<  0) // (TWI) Transmission Completed
+#define AT91C_TWI_RXRDY           (0x1 <<  1) // (TWI) Receive holding register ReaDY
+#define AT91C_TWI_TXRDY           (0x1 <<  2) // (TWI) Transmit holding register ReaDY
+#define AT91C_TWI_OVRE            (0x1 <<  6) // (TWI) Overrun Error
+#define AT91C_TWI_UNRE            (0x1 <<  7) // (TWI) Underrun Error
+#define AT91C_TWI_NACK            (0x1 <<  8) // (TWI) Not Acknowledged
+// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
+// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
+// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
+// *****************************************************************************
+// *** Register offset in AT91S_PWMC_CH structure ***
+#define PWMC_CMR        ( 0) // Channel Mode Register
+#define PWMC_CDTYR      ( 4) // Channel Duty Cycle Register
+#define PWMC_CPRDR      ( 8) // Channel Period Register
+#define PWMC_CCNTR      (12) // Channel Counter Register
+#define PWMC_CUPDR      (16) // Channel Update Register
+#define PWMC_Reserved   (20) // Reserved
+// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- 
+#define AT91C_PWMC_CPRE           (0xF <<  0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
+#define 	AT91C_PWMC_CPRE_MCK                  (0x0) // (PWMC_CH) 
+#define 	AT91C_PWMC_CPRE_MCKA                 (0xB) // (PWMC_CH) 
+#define 	AT91C_PWMC_CPRE_MCKB                 (0xC) // (PWMC_CH) 
+#define AT91C_PWMC_CALG           (0x1 <<  8) // (PWMC_CH) Channel Alignment
+#define AT91C_PWMC_CPOL           (0x1 <<  9) // (PWMC_CH) Channel Polarity
+#define AT91C_PWMC_CPD            (0x1 << 10) // (PWMC_CH) Channel Update Period
+// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- 
+#define AT91C_PWMC_CDTY           (0x0 <<  0) // (PWMC_CH) Channel Duty Cycle
+// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- 
+#define AT91C_PWMC_CPRD           (0x0 <<  0) // (PWMC_CH) Channel Period
+// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- 
+#define AT91C_PWMC_CCNT           (0x0 <<  0) // (PWMC_CH) Channel Counter
+// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- 
+#define AT91C_PWMC_CUPD           (0x0 <<  0) // (PWMC_CH) Channel Update
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
+// *****************************************************************************
+// *** Register offset in AT91S_PWMC structure ***
+#define PWMC_MR         ( 0) // PWMC Mode Register
+#define PWMC_ENA        ( 4) // PWMC Enable Register
+#define PWMC_DIS        ( 8) // PWMC Disable Register
+#define PWMC_SR         (12) // PWMC Status Register
+#define PWMC_IER        (16) // PWMC Interrupt Enable Register
+#define PWMC_IDR        (20) // PWMC Interrupt Disable Register
+#define PWMC_IMR        (24) // PWMC Interrupt Mask Register
+#define PWMC_ISR        (28) // PWMC Interrupt Status Register
+#define PWMC_VR         (252) // PWMC Version Register
+#define PWMC_CH         (512) // PWMC Channel
+// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- 
+#define AT91C_PWMC_DIVA           (0xFF <<  0) // (PWMC) CLKA divide factor.
+#define AT91C_PWMC_PREA           (0xF <<  8) // (PWMC) Divider Input Clock Prescaler A
+#define 	AT91C_PWMC_PREA_MCK                  (0x0 <<  8) // (PWMC) 
+#define AT91C_PWMC_DIVB           (0xFF << 16) // (PWMC) CLKB divide factor.
+#define AT91C_PWMC_PREB           (0xF << 24) // (PWMC) Divider Input Clock Prescaler B
+#define 	AT91C_PWMC_PREB_MCK                  (0x0 << 24) // (PWMC) 
+// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- 
+#define AT91C_PWMC_CHID0          (0x1 <<  0) // (PWMC) Channel ID 0
+#define AT91C_PWMC_CHID1          (0x1 <<  1) // (PWMC) Channel ID 1
+#define AT91C_PWMC_CHID2          (0x1 <<  2) // (PWMC) Channel ID 2
+#define AT91C_PWMC_CHID3          (0x1 <<  3) // (PWMC) Channel ID 3
+// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- 
+// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- 
+// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- 
+// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- 
+// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- 
+// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR USB Device Interface
+// *****************************************************************************
+// *** Register offset in AT91S_UDP structure ***
+#define UDP_NUM         ( 0) // Frame Number Register
+#define UDP_GLBSTATE    ( 4) // Global State Register
+#define UDP_FADDR       ( 8) // Function Address Register
+#define UDP_IER         (16) // Interrupt Enable Register
+#define UDP_IDR         (20) // Interrupt Disable Register
+#define UDP_IMR         (24) // Interrupt Mask Register
+#define UDP_ISR         (28) // Interrupt Status Register
+#define UDP_ICR         (32) // Interrupt Clear Register
+#define UDP_RSTEP       (40) // Reset Endpoint Register
+#define UDP_CSR         (48) // Endpoint Control and Status Register
+#define UDP_FDR         (80) // Endpoint FIFO Data Register
+#define UDP_TXVC        (116) // Transceiver Control Register
+// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- 
+#define AT91C_UDP_FRM_NUM         (0x7FF <<  0) // (UDP) Frame Number as Defined in the Packet Field Formats
+#define AT91C_UDP_FRM_ERR         (0x1 << 16) // (UDP) Frame Error
+#define AT91C_UDP_FRM_OK          (0x1 << 17) // (UDP) Frame OK
+// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- 
+#define AT91C_UDP_FADDEN          (0x1 <<  0) // (UDP) Function Address Enable
+#define AT91C_UDP_CONFG           (0x1 <<  1) // (UDP) Configured
+#define AT91C_UDP_ESR             (0x1 <<  2) // (UDP) Enable Send Resume
+#define AT91C_UDP_RSMINPR         (0x1 <<  3) // (UDP) A Resume Has Been Sent to the Host
+#define AT91C_UDP_RMWUPE          (0x1 <<  4) // (UDP) Remote Wake Up Enable
+// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- 
+#define AT91C_UDP_FADD            (0xFF <<  0) // (UDP) Function Address Value
+#define AT91C_UDP_FEN             (0x1 <<  8) // (UDP) Function Enable
+// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- 
+#define AT91C_UDP_EPINT0          (0x1 <<  0) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT1          (0x1 <<  1) // (UDP) Endpoint 0 Interrupt
+#define AT91C_UDP_EPINT2          (0x1 <<  2) // (UDP) Endpoint 2 Interrupt
+#define AT91C_UDP_EPINT3          (0x1 <<  3) // (UDP) Endpoint 3 Interrupt
+#define AT91C_UDP_EPINT4          (0x1 <<  4) // (UDP) Endpoint 4 Interrupt
+#define AT91C_UDP_EPINT5          (0x1 <<  5) // (UDP) Endpoint 5 Interrupt
+#define AT91C_UDP_RXSUSP          (0x1 <<  8) // (UDP) USB Suspend Interrupt
+#define AT91C_UDP_RXRSM           (0x1 <<  9) // (UDP) USB Resume Interrupt
+#define AT91C_UDP_EXTRSM          (0x1 << 10) // (UDP) USB External Resume Interrupt
+#define AT91C_UDP_SOFINT          (0x1 << 11) // (UDP) USB Start Of frame Interrupt
+#define AT91C_UDP_WAKEUP          (0x1 << 13) // (UDP) USB Resume Interrupt
+// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- 
+// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- 
+// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- 
+#define AT91C_UDP_ENDBUSRES       (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt
+// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- 
+// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- 
+#define AT91C_UDP_EP0             (0x1 <<  0) // (UDP) Reset Endpoint 0
+#define AT91C_UDP_EP1             (0x1 <<  1) // (UDP) Reset Endpoint 1
+#define AT91C_UDP_EP2             (0x1 <<  2) // (UDP) Reset Endpoint 2
+#define AT91C_UDP_EP3             (0x1 <<  3) // (UDP) Reset Endpoint 3
+#define AT91C_UDP_EP4             (0x1 <<  4) // (UDP) Reset Endpoint 4
+#define AT91C_UDP_EP5             (0x1 <<  5) // (UDP) Reset Endpoint 5
+// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- 
+#define AT91C_UDP_TXCOMP          (0x1 <<  0) // (UDP) Generates an IN packet with data previously written in the DPR
+#define AT91C_UDP_RX_DATA_BK0     (0x1 <<  1) // (UDP) Receive Data Bank 0
+#define AT91C_UDP_RXSETUP         (0x1 <<  2) // (UDP) Sends STALL to the Host (Control endpoints)
+#define AT91C_UDP_ISOERROR        (0x1 <<  3) // (UDP) Isochronous error (Isochronous endpoints)
+#define AT91C_UDP_TXPKTRDY        (0x1 <<  4) // (UDP) Transmit Packet Ready
+#define AT91C_UDP_FORCESTALL      (0x1 <<  5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+#define AT91C_UDP_RX_DATA_BK1     (0x1 <<  6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+#define AT91C_UDP_DIR             (0x1 <<  7) // (UDP) Transfer Direction
+#define AT91C_UDP_EPTYPE          (0x7 <<  8) // (UDP) Endpoint type
+#define 	AT91C_UDP_EPTYPE_CTRL                 (0x0 <<  8) // (UDP) Control
+#define 	AT91C_UDP_EPTYPE_ISO_OUT              (0x1 <<  8) // (UDP) Isochronous OUT
+#define 	AT91C_UDP_EPTYPE_BULK_OUT             (0x2 <<  8) // (UDP) Bulk OUT
+#define 	AT91C_UDP_EPTYPE_INT_OUT              (0x3 <<  8) // (UDP) Interrupt OUT
+#define 	AT91C_UDP_EPTYPE_ISO_IN               (0x5 <<  8) // (UDP) Isochronous IN
+#define 	AT91C_UDP_EPTYPE_BULK_IN              (0x6 <<  8) // (UDP) Bulk IN
+#define 	AT91C_UDP_EPTYPE_INT_IN               (0x7 <<  8) // (UDP) Interrupt IN
+#define AT91C_UDP_DTGLE           (0x1 << 11) // (UDP) Data Toggle
+#define AT91C_UDP_EPEDS           (0x1 << 15) // (UDP) Endpoint Enable Disable
+#define AT91C_UDP_RXBYTECNT       (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO
+// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register -------- 
+#define AT91C_UDP_TXVDIS          (0x1 <<  8) // (UDP) 
+#define AT91C_UDP_PUON            (0x1 <<  9) // (UDP) Pull-up ON
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TC structure ***
+#define TC_CCR          ( 0) // Channel Control Register
+#define TC_CMR          ( 4) // Channel Mode Register (Capture Mode / Waveform Mode)
+#define TC_CV           (16) // Counter Value
+#define TC_RA           (20) // Register A
+#define TC_RB           (24) // Register B
+#define TC_RC           (28) // Register C
+#define TC_SR           (32) // Status Register
+#define TC_IER          (36) // Interrupt Enable Register
+#define TC_IDR          (40) // Interrupt Disable Register
+#define TC_IMR          (44) // Interrupt Mask Register
+// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
+#define AT91C_TC_CLKEN            (0x1 <<  0) // (TC) Counter Clock Enable Command
+#define AT91C_TC_CLKDIS           (0x1 <<  1) // (TC) Counter Clock Disable Command
+#define AT91C_TC_SWTRG            (0x1 <<  2) // (TC) Software Trigger Command
+// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
+#define AT91C_TC_CLKS             (0x7 <<  0) // (TC) Clock Selection
+#define 	AT91C_TC_CLKS_TIMER_DIV1_CLOCK     (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV2_CLOCK     (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV3_CLOCK     (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV4_CLOCK     (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK
+#define 	AT91C_TC_CLKS_TIMER_DIV5_CLOCK     (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK
+#define 	AT91C_TC_CLKS_XC0                  (0x5) // (TC) Clock selected: XC0
+#define 	AT91C_TC_CLKS_XC1                  (0x6) // (TC) Clock selected: XC1
+#define 	AT91C_TC_CLKS_XC2                  (0x7) // (TC) Clock selected: XC2
+#define AT91C_TC_CLKI             (0x1 <<  3) // (TC) Clock Invert
+#define AT91C_TC_BURST            (0x3 <<  4) // (TC) Burst Signal Selection
+#define 	AT91C_TC_BURST_NONE                 (0x0 <<  4) // (TC) The clock is not gated by an external signal
+#define 	AT91C_TC_BURST_XC0                  (0x1 <<  4) // (TC) XC0 is ANDed with the selected clock
+#define 	AT91C_TC_BURST_XC1                  (0x2 <<  4) // (TC) XC1 is ANDed with the selected clock
+#define 	AT91C_TC_BURST_XC2                  (0x3 <<  4) // (TC) XC2 is ANDed with the selected clock
+#define AT91C_TC_CPCSTOP          (0x1 <<  6) // (TC) Counter Clock Stopped with RC Compare
+#define AT91C_TC_LDBSTOP          (0x1 <<  6) // (TC) Counter Clock Stopped with RB Loading
+#define AT91C_TC_CPCDIS           (0x1 <<  7) // (TC) Counter Clock Disable with RC Compare
+#define AT91C_TC_LDBDIS           (0x1 <<  7) // (TC) Counter Clock Disabled with RB Loading
+#define AT91C_TC_ETRGEDG          (0x3 <<  8) // (TC) External Trigger Edge Selection
+#define 	AT91C_TC_ETRGEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_ETRGEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_ETRGEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_ETRGEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVTEDG          (0x3 <<  8) // (TC) External Event Edge Selection
+#define 	AT91C_TC_EEVTEDG_NONE                 (0x0 <<  8) // (TC) Edge: None
+#define 	AT91C_TC_EEVTEDG_RISING               (0x1 <<  8) // (TC) Edge: rising edge
+#define 	AT91C_TC_EEVTEDG_FALLING              (0x2 <<  8) // (TC) Edge: falling edge
+#define 	AT91C_TC_EEVTEDG_BOTH                 (0x3 <<  8) // (TC) Edge: each edge
+#define AT91C_TC_EEVT             (0x3 << 10) // (TC) External Event  Selection
+#define 	AT91C_TC_EEVT_TIOB                 (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input
+#define 	AT91C_TC_EEVT_XC0                  (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output
+#define 	AT91C_TC_EEVT_XC1                  (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output
+#define 	AT91C_TC_EEVT_XC2                  (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output
+#define AT91C_TC_ABETRG           (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection
+#define AT91C_TC_ENETRG           (0x1 << 12) // (TC) External Event Trigger enable
+#define AT91C_TC_WAVESEL          (0x3 << 13) // (TC) Waveform  Selection
+#define 	AT91C_TC_WAVESEL_UP                   (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN               (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UP_AUTO              (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare
+#define 	AT91C_TC_WAVESEL_UPDOWN_AUTO          (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare
+#define AT91C_TC_CPCTRG           (0x1 << 14) // (TC) RC Compare Trigger Enable
+#define AT91C_TC_WAVE             (0x1 << 15) // (TC) 
+#define AT91C_TC_ACPA             (0x3 << 16) // (TC) RA Compare Effect on TIOA
+#define 	AT91C_TC_ACPA_NONE                 (0x0 << 16) // (TC) Effect: none
+#define 	AT91C_TC_ACPA_SET                  (0x1 << 16) // (TC) Effect: set
+#define 	AT91C_TC_ACPA_CLEAR                (0x2 << 16) // (TC) Effect: clear
+#define 	AT91C_TC_ACPA_TOGGLE               (0x3 << 16) // (TC) Effect: toggle
+#define AT91C_TC_LDRA             (0x3 << 16) // (TC) RA Loading Selection
+#define 	AT91C_TC_LDRA_NONE                 (0x0 << 16) // (TC) Edge: None
+#define 	AT91C_TC_LDRA_RISING               (0x1 << 16) // (TC) Edge: rising edge of TIOA
+#define 	AT91C_TC_LDRA_FALLING              (0x2 << 16) // (TC) Edge: falling edge of TIOA
+#define 	AT91C_TC_LDRA_BOTH                 (0x3 << 16) // (TC) Edge: each edge of TIOA
+#define AT91C_TC_ACPC             (0x3 << 18) // (TC) RC Compare Effect on TIOA
+#define 	AT91C_TC_ACPC_NONE                 (0x0 << 18) // (TC) Effect: none
+#define 	AT91C_TC_ACPC_SET                  (0x1 << 18) // (TC) Effect: set
+#define 	AT91C_TC_ACPC_CLEAR                (0x2 << 18) // (TC) Effect: clear
+#define 	AT91C_TC_ACPC_TOGGLE               (0x3 << 18) // (TC) Effect: toggle
+#define AT91C_TC_LDRB             (0x3 << 18) // (TC) RB Loading Selection
+#define 	AT91C_TC_LDRB_NONE                 (0x0 << 18) // (TC) Edge: None
+#define 	AT91C_TC_LDRB_RISING               (0x1 << 18) // (TC) Edge: rising edge of TIOA
+#define 	AT91C_TC_LDRB_FALLING              (0x2 << 18) // (TC) Edge: falling edge of TIOA
+#define 	AT91C_TC_LDRB_BOTH                 (0x3 << 18) // (TC) Edge: each edge of TIOA
+#define AT91C_TC_AEEVT            (0x3 << 20) // (TC) External Event Effect on TIOA
+#define 	AT91C_TC_AEEVT_NONE                 (0x0 << 20) // (TC) Effect: none
+#define 	AT91C_TC_AEEVT_SET                  (0x1 << 20) // (TC) Effect: set
+#define 	AT91C_TC_AEEVT_CLEAR                (0x2 << 20) // (TC) Effect: clear
+#define 	AT91C_TC_AEEVT_TOGGLE               (0x3 << 20) // (TC) Effect: toggle
+#define AT91C_TC_ASWTRG           (0x3 << 22) // (TC) Software Trigger Effect on TIOA
+#define 	AT91C_TC_ASWTRG_NONE                 (0x0 << 22) // (TC) Effect: none
+#define 	AT91C_TC_ASWTRG_SET                  (0x1 << 22) // (TC) Effect: set
+#define 	AT91C_TC_ASWTRG_CLEAR                (0x2 << 22) // (TC) Effect: clear
+#define 	AT91C_TC_ASWTRG_TOGGLE               (0x3 << 22) // (TC) Effect: toggle
+#define AT91C_TC_BCPB             (0x3 << 24) // (TC) RB Compare Effect on TIOB
+#define 	AT91C_TC_BCPB_NONE                 (0x0 << 24) // (TC) Effect: none
+#define 	AT91C_TC_BCPB_SET                  (0x1 << 24) // (TC) Effect: set
+#define 	AT91C_TC_BCPB_CLEAR                (0x2 << 24) // (TC) Effect: clear
+#define 	AT91C_TC_BCPB_TOGGLE               (0x3 << 24) // (TC) Effect: toggle
+#define AT91C_TC_BCPC             (0x3 << 26) // (TC) RC Compare Effect on TIOB
+#define 	AT91C_TC_BCPC_NONE                 (0x0 << 26) // (TC) Effect: none
+#define 	AT91C_TC_BCPC_SET                  (0x1 << 26) // (TC) Effect: set
+#define 	AT91C_TC_BCPC_CLEAR                (0x2 << 26) // (TC) Effect: clear
+#define 	AT91C_TC_BCPC_TOGGLE               (0x3 << 26) // (TC) Effect: toggle
+#define AT91C_TC_BEEVT            (0x3 << 28) // (TC) External Event Effect on TIOB
+#define 	AT91C_TC_BEEVT_NONE                 (0x0 << 28) // (TC) Effect: none
+#define 	AT91C_TC_BEEVT_SET                  (0x1 << 28) // (TC) Effect: set
+#define 	AT91C_TC_BEEVT_CLEAR                (0x2 << 28) // (TC) Effect: clear
+#define 	AT91C_TC_BEEVT_TOGGLE               (0x3 << 28) // (TC) Effect: toggle
+#define AT91C_TC_BSWTRG           (0x3 << 30) // (TC) Software Trigger Effect on TIOB
+#define 	AT91C_TC_BSWTRG_NONE                 (0x0 << 30) // (TC) Effect: none
+#define 	AT91C_TC_BSWTRG_SET                  (0x1 << 30) // (TC) Effect: set
+#define 	AT91C_TC_BSWTRG_CLEAR                (0x2 << 30) // (TC) Effect: clear
+#define 	AT91C_TC_BSWTRG_TOGGLE               (0x3 << 30) // (TC) Effect: toggle
+// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
+#define AT91C_TC_COVFS            (0x1 <<  0) // (TC) Counter Overflow
+#define AT91C_TC_LOVRS            (0x1 <<  1) // (TC) Load Overrun
+#define AT91C_TC_CPAS             (0x1 <<  2) // (TC) RA Compare
+#define AT91C_TC_CPBS             (0x1 <<  3) // (TC) RB Compare
+#define AT91C_TC_CPCS             (0x1 <<  4) // (TC) RC Compare
+#define AT91C_TC_LDRAS            (0x1 <<  5) // (TC) RA Loading
+#define AT91C_TC_LDRBS            (0x1 <<  6) // (TC) RB Loading
+#define AT91C_TC_ETRGS            (0x1 <<  7) // (TC) External Trigger
+#define AT91C_TC_CLKSTA           (0x1 << 16) // (TC) Clock Enabling
+#define AT91C_TC_MTIOA            (0x1 << 17) // (TC) TIOA Mirror
+#define AT91C_TC_MTIOB            (0x1 << 18) // (TC) TIOA Mirror
+// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
+// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
+// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+// *****************************************************************************
+// *** Register offset in AT91S_TCB structure ***
+#define TCB_TC0         ( 0) // TC Channel 0
+#define TCB_TC1         (64) // TC Channel 1
+#define TCB_TC2         (128) // TC Channel 2
+#define TCB_BCR         (192) // TC Block Control Register
+#define TCB_BMR         (196) // TC Block Mode Register
+// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
+#define AT91C_TCB_SYNC            (0x1 <<  0) // (TCB) Synchro Command
+// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
+#define AT91C_TCB_TC0XC0S         (0x3 <<  0) // (TCB) External Clock Signal 0 Selection
+#define 	AT91C_TCB_TC0XC0S_TCLK0                (0x0) // (TCB) TCLK0 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_NONE                 (0x1) // (TCB) None signal connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA1                (0x2) // (TCB) TIOA1 connected to XC0
+#define 	AT91C_TCB_TC0XC0S_TIOA2                (0x3) // (TCB) TIOA2 connected to XC0
+#define AT91C_TCB_TC1XC1S         (0x3 <<  2) // (TCB) External Clock Signal 1 Selection
+#define 	AT91C_TCB_TC1XC1S_TCLK1                (0x0 <<  2) // (TCB) TCLK1 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_NONE                 (0x1 <<  2) // (TCB) None signal connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA0                (0x2 <<  2) // (TCB) TIOA0 connected to XC1
+#define 	AT91C_TCB_TC1XC1S_TIOA2                (0x3 <<  2) // (TCB) TIOA2 connected to XC1
+#define AT91C_TCB_TC2XC2S         (0x3 <<  4) // (TCB) External Clock Signal 2 Selection
+#define 	AT91C_TCB_TC2XC2S_TCLK2                (0x0 <<  4) // (TCB) TCLK2 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_NONE                 (0x1 <<  4) // (TCB) None signal connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA0                (0x2 <<  4) // (TCB) TIOA0 connected to XC2
+#define 	AT91C_TCB_TC2XC2S_TIOA1                (0x3 <<  4) // (TCB) TIOA2 connected to XC2
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
+// *****************************************************************************
+// *** Register offset in AT91S_CAN_MB structure ***
+#define CAN_MB_MMR      ( 0) // MailBox Mode Register
+#define CAN_MB_MAM      ( 4) // MailBox Acceptance Mask Register
+#define CAN_MB_MID      ( 8) // MailBox ID Register
+#define CAN_MB_MFID     (12) // MailBox Family ID Register
+#define CAN_MB_MSR      (16) // MailBox Status Register
+#define CAN_MB_MDL      (20) // MailBox Data Low Register
+#define CAN_MB_MDH      (24) // MailBox Data High Register
+#define CAN_MB_MCR      (28) // MailBox Control Register
+// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register -------- 
+#define AT91C_CAN_MTIMEMARK       (0xFFFF <<  0) // (CAN_MB) Mailbox Timemark
+#define AT91C_CAN_PRIOR           (0xF << 16) // (CAN_MB) Mailbox Priority
+#define AT91C_CAN_MOT             (0x7 << 24) // (CAN_MB) Mailbox Object Type
+#define 	AT91C_CAN_MOT_DIS                  (0x0 << 24) // (CAN_MB) 
+#define 	AT91C_CAN_MOT_RX                   (0x1 << 24) // (CAN_MB) 
+#define 	AT91C_CAN_MOT_RXOVERWRITE          (0x2 << 24) // (CAN_MB) 
+#define 	AT91C_CAN_MOT_TX                   (0x3 << 24) // (CAN_MB) 
+#define 	AT91C_CAN_MOT_CONSUMER             (0x4 << 24) // (CAN_MB) 
+#define 	AT91C_CAN_MOT_PRODUCER             (0x5 << 24) // (CAN_MB) 
+// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register -------- 
+#define AT91C_CAN_MIDvB           (0x3FFFF <<  0) // (CAN_MB) Complementary bits for identifier in extended mode
+#define AT91C_CAN_MIDvA           (0x7FF << 18) // (CAN_MB) Identifier for standard frame mode
+#define AT91C_CAN_MIDE            (0x1 << 29) // (CAN_MB) Identifier Version
+// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register -------- 
+// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register -------- 
+// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register -------- 
+#define AT91C_CAN_MTIMESTAMP      (0xFFFF <<  0) // (CAN_MB) Timer Value
+#define AT91C_CAN_MDLC            (0xF << 16) // (CAN_MB) Mailbox Data Length Code
+#define AT91C_CAN_MRTR            (0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request
+#define AT91C_CAN_MABT            (0x1 << 22) // (CAN_MB) Mailbox Message Abort
+#define AT91C_CAN_MRDY            (0x1 << 23) // (CAN_MB) Mailbox Ready
+#define AT91C_CAN_MMI             (0x1 << 24) // (CAN_MB) Mailbox Message Ignored
+// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register -------- 
+// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register -------- 
+// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register -------- 
+#define AT91C_CAN_MACR            (0x1 << 22) // (CAN_MB) Abort Request for Mailbox
+#define AT91C_CAN_MTCR            (0x1 << 23) // (CAN_MB) Mailbox Transfer Command
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Control Area Network Interface
+// *****************************************************************************
+// *** Register offset in AT91S_CAN structure ***
+#define CAN_MR          ( 0) // Mode Register
+#define CAN_IER         ( 4) // Interrupt Enable Register
+#define CAN_IDR         ( 8) // Interrupt Disable Register
+#define CAN_IMR         (12) // Interrupt Mask Register
+#define CAN_SR          (16) // Status Register
+#define CAN_BR          (20) // Baudrate Register
+#define CAN_TIM         (24) // Timer Register
+#define CAN_TIMESTP     (28) // Time Stamp Register
+#define CAN_ECR         (32) // Error Counter Register
+#define CAN_TCR         (36) // Transfer Command Register
+#define CAN_ACR         (40) // Abort Command Register
+#define CAN_VR          (252) // Version Register
+#define CAN_MB0         (512) // CAN Mailbox 0
+#define CAN_MB1         (544) // CAN Mailbox 1
+#define CAN_MB2         (576) // CAN Mailbox 2
+#define CAN_MB3         (608) // CAN Mailbox 3
+#define CAN_MB4         (640) // CAN Mailbox 4
+#define CAN_MB5         (672) // CAN Mailbox 5
+#define CAN_MB6         (704) // CAN Mailbox 6
+#define CAN_MB7         (736) // CAN Mailbox 7
+#define CAN_MB8         (768) // CAN Mailbox 8
+#define CAN_MB9         (800) // CAN Mailbox 9
+#define CAN_MB10        (832) // CAN Mailbox 10
+#define CAN_MB11        (864) // CAN Mailbox 11
+#define CAN_MB12        (896) // CAN Mailbox 12
+#define CAN_MB13        (928) // CAN Mailbox 13
+#define CAN_MB14        (960) // CAN Mailbox 14
+#define CAN_MB15        (992) // CAN Mailbox 15
+// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register -------- 
+#define AT91C_CAN_CANEN           (0x1 <<  0) // (CAN) CAN Controller Enable
+#define AT91C_CAN_LPM             (0x1 <<  1) // (CAN) Disable/Enable Low Power Mode
+#define AT91C_CAN_ABM             (0x1 <<  2) // (CAN) Disable/Enable Autobaud/Listen Mode
+#define AT91C_CAN_OVL             (0x1 <<  3) // (CAN) Disable/Enable Overload Frame
+#define AT91C_CAN_TEOF            (0x1 <<  4) // (CAN) Time Stamp messages at each end of Frame
+#define AT91C_CAN_TTM             (0x1 <<  5) // (CAN) Disable/Enable Time Trigger Mode
+#define AT91C_CAN_TIMFRZ          (0x1 <<  6) // (CAN) Enable Timer Freeze
+#define AT91C_CAN_DRPT            (0x1 <<  7) // (CAN) Disable Repeat
+// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register -------- 
+#define AT91C_CAN_MB0             (0x1 <<  0) // (CAN) Mailbox 0 Flag
+#define AT91C_CAN_MB1             (0x1 <<  1) // (CAN) Mailbox 1 Flag
+#define AT91C_CAN_MB2             (0x1 <<  2) // (CAN) Mailbox 2 Flag
+#define AT91C_CAN_MB3             (0x1 <<  3) // (CAN) Mailbox 3 Flag
+#define AT91C_CAN_MB4             (0x1 <<  4) // (CAN) Mailbox 4 Flag
+#define AT91C_CAN_MB5             (0x1 <<  5) // (CAN) Mailbox 5 Flag
+#define AT91C_CAN_MB6             (0x1 <<  6) // (CAN) Mailbox 6 Flag
+#define AT91C_CAN_MB7             (0x1 <<  7) // (CAN) Mailbox 7 Flag
+#define AT91C_CAN_MB8             (0x1 <<  8) // (CAN) Mailbox 8 Flag
+#define AT91C_CAN_MB9             (0x1 <<  9) // (CAN) Mailbox 9 Flag
+#define AT91C_CAN_MB10            (0x1 << 10) // (CAN) Mailbox 10 Flag
+#define AT91C_CAN_MB11            (0x1 << 11) // (CAN) Mailbox 11 Flag
+#define AT91C_CAN_MB12            (0x1 << 12) // (CAN) Mailbox 12 Flag
+#define AT91C_CAN_MB13            (0x1 << 13) // (CAN) Mailbox 13 Flag
+#define AT91C_CAN_MB14            (0x1 << 14) // (CAN) Mailbox 14 Flag
+#define AT91C_CAN_MB15            (0x1 << 15) // (CAN) Mailbox 15 Flag
+#define AT91C_CAN_ERRA            (0x1 << 16) // (CAN) Error Active Mode Flag
+#define AT91C_CAN_WARN            (0x1 << 17) // (CAN) Warning Limit Flag
+#define AT91C_CAN_ERRP            (0x1 << 18) // (CAN) Error Passive Mode Flag
+#define AT91C_CAN_BOFF            (0x1 << 19) // (CAN) Bus Off Mode Flag
+#define AT91C_CAN_SLEEP           (0x1 << 20) // (CAN) Sleep Flag
+#define AT91C_CAN_WAKEUP          (0x1 << 21) // (CAN) Wakeup Flag
+#define AT91C_CAN_TOVF            (0x1 << 22) // (CAN) Timer Overflow Flag
+#define AT91C_CAN_TSTP            (0x1 << 23) // (CAN) Timestamp Flag
+#define AT91C_CAN_CERR            (0x1 << 24) // (CAN) CRC Error
+#define AT91C_CAN_SERR            (0x1 << 25) // (CAN) Stuffing Error
+#define AT91C_CAN_AERR            (0x1 << 26) // (CAN) Acknowledgment Error
+#define AT91C_CAN_FERR            (0x1 << 27) // (CAN) Form Error
+#define AT91C_CAN_BERR            (0x1 << 28) // (CAN) Bit Error
+// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register -------- 
+// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register -------- 
+// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register -------- 
+#define AT91C_CAN_RBSY            (0x1 << 29) // (CAN) Receiver Busy
+#define AT91C_CAN_TBSY            (0x1 << 30) // (CAN) Transmitter Busy
+#define AT91C_CAN_OVLY            (0x1 << 31) // (CAN) Overload Busy
+// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register -------- 
+#define AT91C_CAN_PHASE2          (0x7 <<  0) // (CAN) Phase 2 segment
+#define AT91C_CAN_PHASE1          (0x7 <<  4) // (CAN) Phase 1 segment
+#define AT91C_CAN_PROPAG          (0x7 <<  8) // (CAN) Programmation time segment
+#define AT91C_CAN_SYNC            (0x3 << 12) // (CAN) Re-synchronization jump width segment
+#define AT91C_CAN_BRP             (0x7F << 16) // (CAN) Baudrate Prescaler
+#define AT91C_CAN_SMP             (0x1 << 24) // (CAN) Sampling mode
+// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register -------- 
+#define AT91C_CAN_TIMER           (0xFFFF <<  0) // (CAN) Timer field
+// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register -------- 
+// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register -------- 
+#define AT91C_CAN_REC             (0xFF <<  0) // (CAN) Receive Error Counter
+#define AT91C_CAN_TEC             (0xFF << 16) // (CAN) Transmit Error Counter
+// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register -------- 
+#define AT91C_CAN_TIMRST          (0x1 << 31) // (CAN) Timer Reset Field
+// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register -------- 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
+// *****************************************************************************
+// *** Register offset in AT91S_EMAC structure ***
+#define EMAC_NCR        ( 0) // Network Control Register
+#define EMAC_NCFGR      ( 4) // Network Configuration Register
+#define EMAC_NSR        ( 8) // Network Status Register
+#define EMAC_TSR        (20) // Transmit Status Register
+#define EMAC_RBQP       (24) // Receive Buffer Queue Pointer
+#define EMAC_TBQP       (28) // Transmit Buffer Queue Pointer
+#define EMAC_RSR        (32) // Receive Status Register
+#define EMAC_ISR        (36) // Interrupt Status Register
+#define EMAC_IER        (40) // Interrupt Enable Register
+#define EMAC_IDR        (44) // Interrupt Disable Register
+#define EMAC_IMR        (48) // Interrupt Mask Register
+#define EMAC_MAN        (52) // PHY Maintenance Register
+#define EMAC_PTR        (56) // Pause Time Register
+#define EMAC_PFR        (60) // Pause Frames received Register
+#define EMAC_FTO        (64) // Frames Transmitted OK Register
+#define EMAC_SCF        (68) // Single Collision Frame Register
+#define EMAC_MCF        (72) // Multiple Collision Frame Register
+#define EMAC_FRO        (76) // Frames Received OK Register
+#define EMAC_FCSE       (80) // Frame Check Sequence Error Register
+#define EMAC_ALE        (84) // Alignment Error Register
+#define EMAC_DTF        (88) // Deferred Transmission Frame Register
+#define EMAC_LCOL       (92) // Late Collision Register
+#define EMAC_ECOL       (96) // Excessive Collision Register
+#define EMAC_TUND       (100) // Transmit Underrun Error Register
+#define EMAC_CSE        (104) // Carrier Sense Error Register
+#define EMAC_RRE        (108) // Receive Ressource Error Register
+#define EMAC_ROV        (112) // Receive Overrun Errors Register
+#define EMAC_RSE        (116) // Receive Symbol Errors Register
+#define EMAC_ELE        (120) // Excessive Length Errors Register
+#define EMAC_RJA        (124) // Receive Jabbers Register
+#define EMAC_USF        (128) // Undersize Frames Register
+#define EMAC_STE        (132) // SQE Test Error Register
+#define EMAC_RLE        (136) // Receive Length Field Mismatch Register
+#define EMAC_TPF        (140) // Transmitted Pause Frames Register
+#define EMAC_HRB        (144) // Hash Address Bottom[31:0]
+#define EMAC_HRT        (148) // Hash Address Top[63:32]
+#define EMAC_SA1L       (152) // Specific Address 1 Bottom, First 4 bytes
+#define EMAC_SA1H       (156) // Specific Address 1 Top, Last 2 bytes
+#define EMAC_SA2L       (160) // Specific Address 2 Bottom, First 4 bytes
+#define EMAC_SA2H       (164) // Specific Address 2 Top, Last 2 bytes
+#define EMAC_SA3L       (168) // Specific Address 3 Bottom, First 4 bytes
+#define EMAC_SA3H       (172) // Specific Address 3 Top, Last 2 bytes
+#define EMAC_SA4L       (176) // Specific Address 4 Bottom, First 4 bytes
+#define EMAC_SA4H       (180) // Specific Address 4 Top, Last 2 bytes
+#define EMAC_TID        (184) // Type ID Checking Register
+#define EMAC_TPQ        (188) // Transmit Pause Quantum Register
+#define EMAC_USRIO      (192) // USER Input/Output Register
+#define EMAC_WOL        (196) // Wake On LAN Register
+#define EMAC_REV        (252) // Revision Register
+// -------- EMAC_NCR : (EMAC Offset: 0x0)  -------- 
+#define AT91C_EMAC_LB             (0x1 <<  0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+#define AT91C_EMAC_LLB            (0x1 <<  1) // (EMAC) Loopback local. 
+#define AT91C_EMAC_RE             (0x1 <<  2) // (EMAC) Receive enable. 
+#define AT91C_EMAC_TE             (0x1 <<  3) // (EMAC) Transmit enable. 
+#define AT91C_EMAC_MPE            (0x1 <<  4) // (EMAC) Management port enable. 
+#define AT91C_EMAC_CLRSTAT        (0x1 <<  5) // (EMAC) Clear statistics registers. 
+#define AT91C_EMAC_INCSTAT        (0x1 <<  6) // (EMAC) Increment statistics registers. 
+#define AT91C_EMAC_WESTAT         (0x1 <<  7) // (EMAC) Write enable for statistics registers. 
+#define AT91C_EMAC_BP             (0x1 <<  8) // (EMAC) Back pressure. 
+#define AT91C_EMAC_TSTART         (0x1 <<  9) // (EMAC) Start Transmission. 
+#define AT91C_EMAC_THALT          (0x1 << 10) // (EMAC) Transmission Halt. 
+#define AT91C_EMAC_TPFR           (0x1 << 11) // (EMAC) Transmit pause frame 
+#define AT91C_EMAC_TZQ            (0x1 << 12) // (EMAC) Transmit zero quantum pause frame
+// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register -------- 
+#define AT91C_EMAC_SPD            (0x1 <<  0) // (EMAC) Speed. 
+#define AT91C_EMAC_FD             (0x1 <<  1) // (EMAC) Full duplex. 
+#define AT91C_EMAC_JFRAME         (0x1 <<  3) // (EMAC) Jumbo Frames. 
+#define AT91C_EMAC_CAF            (0x1 <<  4) // (EMAC) Copy all frames. 
+#define AT91C_EMAC_NBC            (0x1 <<  5) // (EMAC) No broadcast. 
+#define AT91C_EMAC_MTI            (0x1 <<  6) // (EMAC) Multicast hash event enable
+#define AT91C_EMAC_UNI            (0x1 <<  7) // (EMAC) Unicast hash enable. 
+#define AT91C_EMAC_BIG            (0x1 <<  8) // (EMAC) Receive 1522 bytes. 
+#define AT91C_EMAC_EAE            (0x1 <<  9) // (EMAC) External address match enable. 
+#define AT91C_EMAC_CLK            (0x3 << 10) // (EMAC) 
+#define 	AT91C_EMAC_CLK_HCLK_8               (0x0 << 10) // (EMAC) HCLK divided by 8
+#define 	AT91C_EMAC_CLK_HCLK_16              (0x1 << 10) // (EMAC) HCLK divided by 16
+#define 	AT91C_EMAC_CLK_HCLK_32              (0x2 << 10) // (EMAC) HCLK divided by 32
+#define 	AT91C_EMAC_CLK_HCLK_64              (0x3 << 10) // (EMAC) HCLK divided by 64
+#define AT91C_EMAC_RTY            (0x1 << 12) // (EMAC) 
+#define AT91C_EMAC_PAE            (0x1 << 13) // (EMAC) 
+#define AT91C_EMAC_RBOF           (0x3 << 14) // (EMAC) 
+#define 	AT91C_EMAC_RBOF_OFFSET_0             (0x0 << 14) // (EMAC) no offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_1             (0x1 << 14) // (EMAC) one byte offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_2             (0x2 << 14) // (EMAC) two bytes offset from start of receive buffer
+#define 	AT91C_EMAC_RBOF_OFFSET_3             (0x3 << 14) // (EMAC) three bytes offset from start of receive buffer
+#define AT91C_EMAC_RLCE           (0x1 << 16) // (EMAC) Receive Length field Checking Enable
+#define AT91C_EMAC_DRFCS          (0x1 << 17) // (EMAC) Discard Receive FCS
+#define AT91C_EMAC_EFRHD          (0x1 << 18) // (EMAC) 
+#define AT91C_EMAC_IRXFCS         (0x1 << 19) // (EMAC) Ignore RX FCS
+// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register -------- 
+#define AT91C_EMAC_LINKR          (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_MDIO           (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_IDLE           (0x1 <<  2) // (EMAC) 
+// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register -------- 
+#define AT91C_EMAC_UBR            (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_COL            (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RLES           (0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TGO            (0x1 <<  3) // (EMAC) Transmit Go
+#define AT91C_EMAC_BEX            (0x1 <<  4) // (EMAC) Buffers exhausted mid frame
+#define AT91C_EMAC_COMP           (0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_UND            (0x1 <<  6) // (EMAC) 
+// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
+#define AT91C_EMAC_BNA            (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_REC            (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_OVR            (0x1 <<  2) // (EMAC) 
+// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
+#define AT91C_EMAC_MFD            (0x1 <<  0) // (EMAC) 
+#define AT91C_EMAC_RCOMP          (0x1 <<  1) // (EMAC) 
+#define AT91C_EMAC_RXUBR          (0x1 <<  2) // (EMAC) 
+#define AT91C_EMAC_TXUBR          (0x1 <<  3) // (EMAC) 
+#define AT91C_EMAC_TUNDR          (0x1 <<  4) // (EMAC) 
+#define AT91C_EMAC_RLEX           (0x1 <<  5) // (EMAC) 
+#define AT91C_EMAC_TXERR          (0x1 <<  6) // (EMAC) 
+#define AT91C_EMAC_TCOMP          (0x1 <<  7) // (EMAC) 
+#define AT91C_EMAC_LINK           (0x1 <<  9) // (EMAC) 
+#define AT91C_EMAC_ROVR           (0x1 << 10) // (EMAC) 
+#define AT91C_EMAC_HRESP          (0x1 << 11) // (EMAC) 
+#define AT91C_EMAC_PFRE           (0x1 << 12) // (EMAC) 
+#define AT91C_EMAC_PTZ            (0x1 << 13) // (EMAC) 
+// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
+// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
+// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
+// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
+#define AT91C_EMAC_DATA           (0xFFFF <<  0) // (EMAC) 
+#define AT91C_EMAC_CODE           (0x3 << 16) // (EMAC) 
+#define AT91C_EMAC_REGA           (0x1F << 18) // (EMAC) 
+#define AT91C_EMAC_PHYA           (0x1F << 23) // (EMAC) 
+#define AT91C_EMAC_RW             (0x3 << 28) // (EMAC) 
+#define AT91C_EMAC_SOF            (0x3 << 30) // (EMAC) 
+// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register -------- 
+#define AT91C_EMAC_RMII           (0x1 <<  0) // (EMAC) Reduce MII
+#define AT91C_EMAC_CLKEN          (0x1 <<  1) // (EMAC) Clock Enable
+// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register -------- 
+#define AT91C_EMAC_IP             (0xFFFF <<  0) // (EMAC) ARP request IP address
+#define AT91C_EMAC_MAG            (0x1 << 16) // (EMAC) Magic packet event enable
+#define AT91C_EMAC_ARP            (0x1 << 17) // (EMAC) ARP request event enable
+#define AT91C_EMAC_SA1            (0x1 << 18) // (EMAC) Specific address register 1 event enable
+// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register -------- 
+#define AT91C_EMAC_REVREF         (0xFFFF <<  0) // (EMAC) 
+#define AT91C_EMAC_PARTREF        (0xFFFF << 16) // (EMAC) 
+
+// *****************************************************************************
+//              SOFTWARE API DEFINITION  FOR Analog to Digital Convertor
+// *****************************************************************************
+// *** Register offset in AT91S_ADC structure ***
+#define ADC_CR          ( 0) // ADC Control Register
+#define ADC_MR          ( 4) // ADC Mode Register
+#define ADC_CHER        (16) // ADC Channel Enable Register
+#define ADC_CHDR        (20) // ADC Channel Disable Register
+#define ADC_CHSR        (24) // ADC Channel Status Register
+#define ADC_SR          (28) // ADC Status Register
+#define ADC_LCDR        (32) // ADC Last Converted Data Register
+#define ADC_IER         (36) // ADC Interrupt Enable Register
+#define ADC_IDR         (40) // ADC Interrupt Disable Register
+#define ADC_IMR         (44) // ADC Interrupt Mask Register
+#define ADC_CDR0        (48) // ADC Channel Data Register 0
+#define ADC_CDR1        (52) // ADC Channel Data Register 1
+#define ADC_CDR2        (56) // ADC Channel Data Register 2
+#define ADC_CDR3        (60) // ADC Channel Data Register 3
+#define ADC_CDR4        (64) // ADC Channel Data Register 4
+#define ADC_CDR5        (68) // ADC Channel Data Register 5
+#define ADC_CDR6        (72) // ADC Channel Data Register 6
+#define ADC_CDR7        (76) // ADC Channel Data Register 7
+#define ADC_RPR         (256) // Receive Pointer Register
+#define ADC_RCR         (260) // Receive Counter Register
+#define ADC_TPR         (264) // Transmit Pointer Register
+#define ADC_TCR         (268) // Transmit Counter Register
+#define ADC_RNPR        (272) // Receive Next Pointer Register
+#define ADC_RNCR        (276) // Receive Next Counter Register
+#define ADC_TNPR        (280) // Transmit Next Pointer Register
+#define ADC_TNCR        (284) // Transmit Next Counter Register
+#define ADC_PTCR        (288) // PDC Transfer Control Register
+#define ADC_PTSR        (292) // PDC Transfer Status Register
+// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register -------- 
+#define AT91C_ADC_SWRST           (0x1 <<  0) // (ADC) Software Reset
+#define AT91C_ADC_START           (0x1 <<  1) // (ADC) Start Conversion
+// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register -------- 
+#define AT91C_ADC_TRGEN           (0x1 <<  0) // (ADC) Trigger Enable
+#define 	AT91C_ADC_TRGEN_DIS                  (0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
+#define 	AT91C_ADC_TRGEN_EN                   (0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled.
+#define AT91C_ADC_TRGSEL          (0x7 <<  1) // (ADC) Trigger Selection
+#define 	AT91C_ADC_TRGSEL_TIOA0                (0x0 <<  1) // (ADC) Selected TRGSEL = TIAO0
+#define 	AT91C_ADC_TRGSEL_TIOA1                (0x1 <<  1) // (ADC) Selected TRGSEL = TIAO1
+#define 	AT91C_ADC_TRGSEL_TIOA2                (0x2 <<  1) // (ADC) Selected TRGSEL = TIAO2
+#define 	AT91C_ADC_TRGSEL_TIOA3                (0x3 <<  1) // (ADC) Selected TRGSEL = TIAO3
+#define 	AT91C_ADC_TRGSEL_TIOA4                (0x4 <<  1) // (ADC) Selected TRGSEL = TIAO4
+#define 	AT91C_ADC_TRGSEL_TIOA5                (0x5 <<  1) // (ADC) Selected TRGSEL = TIAO5
+#define 	AT91C_ADC_TRGSEL_EXT                  (0x6 <<  1) // (ADC) Selected TRGSEL = External Trigger
+#define AT91C_ADC_LOWRES          (0x1 <<  4) // (ADC) Resolution.
+#define 	AT91C_ADC_LOWRES_10_BIT               (0x0 <<  4) // (ADC) 10-bit resolution
+#define 	AT91C_ADC_LOWRES_8_BIT                (0x1 <<  4) // (ADC) 8-bit resolution
+#define AT91C_ADC_SLEEP           (0x1 <<  5) // (ADC) Sleep Mode
+#define 	AT91C_ADC_SLEEP_NORMAL_MODE          (0x0 <<  5) // (ADC) Normal Mode
+#define 	AT91C_ADC_SLEEP_MODE                 (0x1 <<  5) // (ADC) Sleep Mode
+#define AT91C_ADC_PRESCAL         (0x3F <<  8) // (ADC) Prescaler rate selection
+#define AT91C_ADC_STARTUP         (0x1F << 16) // (ADC) Startup Time
+#define AT91C_ADC_SHTIM           (0xF << 24) // (ADC) Sample & Hold Time
+// -------- 	ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register -------- 
+#define AT91C_ADC_CH0             (0x1 <<  0) // (ADC) Channel 0
+#define AT91C_ADC_CH1             (0x1 <<  1) // (ADC) Channel 1
+#define AT91C_ADC_CH2             (0x1 <<  2) // (ADC) Channel 2
+#define AT91C_ADC_CH3             (0x1 <<  3) // (ADC) Channel 3
+#define AT91C_ADC_CH4             (0x1 <<  4) // (ADC) Channel 4
+#define AT91C_ADC_CH5             (0x1 <<  5) // (ADC) Channel 5
+#define AT91C_ADC_CH6             (0x1 <<  6) // (ADC) Channel 6
+#define AT91C_ADC_CH7             (0x1 <<  7) // (ADC) Channel 7
+// -------- 	ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register -------- 
+// -------- 	ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register -------- 
+// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register -------- 
+#define AT91C_ADC_EOC0            (0x1 <<  0) // (ADC) End of Conversion
+#define AT91C_ADC_EOC1            (0x1 <<  1) // (ADC) End of Conversion
+#define AT91C_ADC_EOC2            (0x1 <<  2) // (ADC) End of Conversion
+#define AT91C_ADC_EOC3            (0x1 <<  3) // (ADC) End of Conversion
+#define AT91C_ADC_EOC4            (0x1 <<  4) // (ADC) End of Conversion
+#define AT91C_ADC_EOC5            (0x1 <<  5) // (ADC) End of Conversion
+#define AT91C_ADC_EOC6            (0x1 <<  6) // (ADC) End of Conversion
+#define AT91C_ADC_EOC7            (0x1 <<  7) // (ADC) End of Conversion
+#define AT91C_ADC_OVRE0           (0x1 <<  8) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE1           (0x1 <<  9) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE2           (0x1 << 10) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE3           (0x1 << 11) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE4           (0x1 << 12) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE5           (0x1 << 13) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE6           (0x1 << 14) // (ADC) Overrun Error
+#define AT91C_ADC_OVRE7           (0x1 << 15) // (ADC) Overrun Error
+#define AT91C_ADC_DRDY            (0x1 << 16) // (ADC) Data Ready
+#define AT91C_ADC_GOVRE           (0x1 << 17) // (ADC) General Overrun
+#define AT91C_ADC_ENDRX           (0x1 << 18) // (ADC) End of Receiver Transfer
+#define AT91C_ADC_RXBUFF          (0x1 << 19) // (ADC) RXBUFF Interrupt
+// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register -------- 
+#define AT91C_ADC_LDATA           (0x3FF <<  0) // (ADC) Last Data Converted
+// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register -------- 
+// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register -------- 
+// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register -------- 
+// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 -------- 
+#define AT91C_ADC_DATA            (0x3FF <<  0) // (ADC) Converted Data
+// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 -------- 
+// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 -------- 
+// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 -------- 
+// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 -------- 
+// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 -------- 
+// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 -------- 
+// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 -------- 
+
+// *****************************************************************************
+//               REGISTER ADDRESS DEFINITION FOR AT91SAM7X256
+// *****************************************************************************
+// ========== Register definition for SYS peripheral ========== 
+// ========== Register definition for AIC peripheral ========== 
+#define AT91C_AIC_IVR             (0xFFFFF100) // (AIC) IRQ Vector Register
+#define AT91C_AIC_SMR             (0xFFFFF000) // (AIC) Source Mode Register
+#define AT91C_AIC_FVR             (0xFFFFF104) // (AIC) FIQ Vector Register
+#define AT91C_AIC_DCR             (0xFFFFF138) // (AIC) Debug Control Register (Protect)
+#define AT91C_AIC_EOICR           (0xFFFFF130) // (AIC) End of Interrupt Command Register
+#define AT91C_AIC_SVR             (0xFFFFF080) // (AIC) Source Vector Register
+#define AT91C_AIC_FFSR            (0xFFFFF148) // (AIC) Fast Forcing Status Register
+#define AT91C_AIC_ICCR            (0xFFFFF128) // (AIC) Interrupt Clear Command Register
+#define AT91C_AIC_ISR             (0xFFFFF108) // (AIC) Interrupt Status Register
+#define AT91C_AIC_IMR             (0xFFFFF110) // (AIC) Interrupt Mask Register
+#define AT91C_AIC_IPR             (0xFFFFF10C) // (AIC) Interrupt Pending Register
+#define AT91C_AIC_FFER            (0xFFFFF140) // (AIC) Fast Forcing Enable Register
+#define AT91C_AIC_IECR            (0xFFFFF120) // (AIC) Interrupt Enable Command Register
+#define AT91C_AIC_ISCR            (0xFFFFF12C) // (AIC) Interrupt Set Command Register
+#define AT91C_AIC_FFDR            (0xFFFFF144) // (AIC) Fast Forcing Disable Register
+#define AT91C_AIC_CISR            (0xFFFFF114) // (AIC) Core Interrupt Status Register
+#define AT91C_AIC_IDCR            (0xFFFFF124) // (AIC) Interrupt Disable Command Register
+#define AT91C_AIC_SPU             (0xFFFFF134) // (AIC) Spurious Vector Register
+// ========== Register definition for PDC_DBGU peripheral ========== 
+#define AT91C_DBGU_TCR            (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register
+#define AT91C_DBGU_RNPR           (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register
+#define AT91C_DBGU_TNPR           (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register
+#define AT91C_DBGU_TPR            (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register
+#define AT91C_DBGU_RPR            (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register
+#define AT91C_DBGU_RCR            (0xFFFFF304) // (PDC_DBGU) Receive Counter Register
+#define AT91C_DBGU_RNCR           (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register
+#define AT91C_DBGU_PTCR           (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register
+#define AT91C_DBGU_PTSR           (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register
+#define AT91C_DBGU_TNCR           (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register
+// ========== Register definition for DBGU peripheral ========== 
+#define AT91C_DBGU_EXID           (0xFFFFF244) // (DBGU) Chip ID Extension Register
+#define AT91C_DBGU_BRGR           (0xFFFFF220) // (DBGU) Baud Rate Generator Register
+#define AT91C_DBGU_IDR            (0xFFFFF20C) // (DBGU) Interrupt Disable Register
+#define AT91C_DBGU_CSR            (0xFFFFF214) // (DBGU) Channel Status Register
+#define AT91C_DBGU_CIDR           (0xFFFFF240) // (DBGU) Chip ID Register
+#define AT91C_DBGU_MR             (0xFFFFF204) // (DBGU) Mode Register
+#define AT91C_DBGU_IMR            (0xFFFFF210) // (DBGU) Interrupt Mask Register
+#define AT91C_DBGU_CR             (0xFFFFF200) // (DBGU) Control Register
+#define AT91C_DBGU_FNTR           (0xFFFFF248) // (DBGU) Force NTRST Register
+#define AT91C_DBGU_THR            (0xFFFFF21C) // (DBGU) Transmitter Holding Register
+#define AT91C_DBGU_RHR            (0xFFFFF218) // (DBGU) Receiver Holding Register
+#define AT91C_DBGU_IER            (0xFFFFF208) // (DBGU) Interrupt Enable Register
+// ========== Register definition for PIOA peripheral ========== 
+#define AT91C_PIOA_ODR            (0xFFFFF414) // (PIOA) Output Disable Registerr
+#define AT91C_PIOA_SODR           (0xFFFFF430) // (PIOA) Set Output Data Register
+#define AT91C_PIOA_ISR            (0xFFFFF44C) // (PIOA) Interrupt Status Register
+#define AT91C_PIOA_ABSR           (0xFFFFF478) // (PIOA) AB Select Status Register
+#define AT91C_PIOA_IER            (0xFFFFF440) // (PIOA) Interrupt Enable Register
+#define AT91C_PIOA_PPUDR          (0xFFFFF460) // (PIOA) Pull-up Disable Register
+#define AT91C_PIOA_IMR            (0xFFFFF448) // (PIOA) Interrupt Mask Register
+#define AT91C_PIOA_PER            (0xFFFFF400) // (PIOA) PIO Enable Register
+#define AT91C_PIOA_IFDR           (0xFFFFF424) // (PIOA) Input Filter Disable Register
+#define AT91C_PIOA_OWDR           (0xFFFFF4A4) // (PIOA) Output Write Disable Register
+#define AT91C_PIOA_MDSR           (0xFFFFF458) // (PIOA) Multi-driver Status Register
+#define AT91C_PIOA_IDR            (0xFFFFF444) // (PIOA) Interrupt Disable Register
+#define AT91C_PIOA_ODSR           (0xFFFFF438) // (PIOA) Output Data Status Register
+#define AT91C_PIOA_PPUSR          (0xFFFFF468) // (PIOA) Pull-up Status Register
+#define AT91C_PIOA_OWSR           (0xFFFFF4A8) // (PIOA) Output Write Status Register
+#define AT91C_PIOA_BSR            (0xFFFFF474) // (PIOA) Select B Register
+#define AT91C_PIOA_OWER           (0xFFFFF4A0) // (PIOA) Output Write Enable Register
+#define AT91C_PIOA_IFER           (0xFFFFF420) // (PIOA) Input Filter Enable Register
+#define AT91C_PIOA_PDSR           (0xFFFFF43C) // (PIOA) Pin Data Status Register
+#define AT91C_PIOA_PPUER          (0xFFFFF464) // (PIOA) Pull-up Enable Register
+#define AT91C_PIOA_OSR            (0xFFFFF418) // (PIOA) Output Status Register
+#define AT91C_PIOA_ASR            (0xFFFFF470) // (PIOA) Select A Register
+#define AT91C_PIOA_MDDR           (0xFFFFF454) // (PIOA) Multi-driver Disable Register
+#define AT91C_PIOA_CODR           (0xFFFFF434) // (PIOA) Clear Output Data Register
+#define AT91C_PIOA_MDER           (0xFFFFF450) // (PIOA) Multi-driver Enable Register
+#define AT91C_PIOA_PDR            (0xFFFFF404) // (PIOA) PIO Disable Register
+#define AT91C_PIOA_IFSR           (0xFFFFF428) // (PIOA) Input Filter Status Register
+#define AT91C_PIOA_OER            (0xFFFFF410) // (PIOA) Output Enable Register
+#define AT91C_PIOA_PSR            (0xFFFFF408) // (PIOA) PIO Status Register
+// ========== Register definition for PIOB peripheral ========== 
+#define AT91C_PIOB_OWDR           (0xFFFFF6A4) // (PIOB) Output Write Disable Register
+#define AT91C_PIOB_MDER           (0xFFFFF650) // (PIOB) Multi-driver Enable Register
+#define AT91C_PIOB_PPUSR          (0xFFFFF668) // (PIOB) Pull-up Status Register
+#define AT91C_PIOB_IMR            (0xFFFFF648) // (PIOB) Interrupt Mask Register
+#define AT91C_PIOB_ASR            (0xFFFFF670) // (PIOB) Select A Register
+#define AT91C_PIOB_PPUDR          (0xFFFFF660) // (PIOB) Pull-up Disable Register
+#define AT91C_PIOB_PSR            (0xFFFFF608) // (PIOB) PIO Status Register
+#define AT91C_PIOB_IER            (0xFFFFF640) // (PIOB) Interrupt Enable Register
+#define AT91C_PIOB_CODR           (0xFFFFF634) // (PIOB) Clear Output Data Register
+#define AT91C_PIOB_OWER           (0xFFFFF6A0) // (PIOB) Output Write Enable Register
+#define AT91C_PIOB_ABSR           (0xFFFFF678) // (PIOB) AB Select Status Register
+#define AT91C_PIOB_IFDR           (0xFFFFF624) // (PIOB) Input Filter Disable Register
+#define AT91C_PIOB_PDSR           (0xFFFFF63C) // (PIOB) Pin Data Status Register
+#define AT91C_PIOB_IDR            (0xFFFFF644) // (PIOB) Interrupt Disable Register
+#define AT91C_PIOB_OWSR           (0xFFFFF6A8) // (PIOB) Output Write Status Register
+#define AT91C_PIOB_PDR            (0xFFFFF604) // (PIOB) PIO Disable Register
+#define AT91C_PIOB_ODR            (0xFFFFF614) // (PIOB) Output Disable Registerr
+#define AT91C_PIOB_IFSR           (0xFFFFF628) // (PIOB) Input Filter Status Register
+#define AT91C_PIOB_PPUER          (0xFFFFF664) // (PIOB) Pull-up Enable Register
+#define AT91C_PIOB_SODR           (0xFFFFF630) // (PIOB) Set Output Data Register
+#define AT91C_PIOB_ISR            (0xFFFFF64C) // (PIOB) Interrupt Status Register
+#define AT91C_PIOB_ODSR           (0xFFFFF638) // (PIOB) Output Data Status Register
+#define AT91C_PIOB_OSR            (0xFFFFF618) // (PIOB) Output Status Register
+#define AT91C_PIOB_MDSR           (0xFFFFF658) // (PIOB) Multi-driver Status Register
+#define AT91C_PIOB_IFER           (0xFFFFF620) // (PIOB) Input Filter Enable Register
+#define AT91C_PIOB_BSR            (0xFFFFF674) // (PIOB) Select B Register
+#define AT91C_PIOB_MDDR           (0xFFFFF654) // (PIOB) Multi-driver Disable Register
+#define AT91C_PIOB_OER            (0xFFFFF610) // (PIOB) Output Enable Register
+#define AT91C_PIOB_PER            (0xFFFFF600) // (PIOB) PIO Enable Register
+// ========== Register definition for CKGR peripheral ========== 
+#define AT91C_CKGR_MOR            (0xFFFFFC20) // (CKGR) Main Oscillator Register
+#define AT91C_CKGR_PLLR           (0xFFFFFC2C) // (CKGR) PLL Register
+#define AT91C_CKGR_MCFR           (0xFFFFFC24) // (CKGR) Main Clock  Frequency Register
+// ========== Register definition for PMC peripheral ========== 
+#define AT91C_PMC_IDR             (0xFFFFFC64) // (PMC) Interrupt Disable Register
+#define AT91C_PMC_MOR             (0xFFFFFC20) // (PMC) Main Oscillator Register
+#define AT91C_PMC_PLLR            (0xFFFFFC2C) // (PMC) PLL Register
+#define AT91C_PMC_PCER            (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register
+#define AT91C_PMC_PCKR            (0xFFFFFC40) // (PMC) Programmable Clock Register
+#define AT91C_PMC_MCKR            (0xFFFFFC30) // (PMC) Master Clock Register
+#define AT91C_PMC_SCDR            (0xFFFFFC04) // (PMC) System Clock Disable Register
+#define AT91C_PMC_PCDR            (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register
+#define AT91C_PMC_SCSR            (0xFFFFFC08) // (PMC) System Clock Status Register
+#define AT91C_PMC_PCSR            (0xFFFFFC18) // (PMC) Peripheral Clock Status Register
+#define AT91C_PMC_MCFR            (0xFFFFFC24) // (PMC) Main Clock  Frequency Register
+#define AT91C_PMC_SCER            (0xFFFFFC00) // (PMC) System Clock Enable Register
+#define AT91C_PMC_IMR             (0xFFFFFC6C) // (PMC) Interrupt Mask Register
+#define AT91C_PMC_IER             (0xFFFFFC60) // (PMC) Interrupt Enable Register
+#define AT91C_PMC_SR              (0xFFFFFC68) // (PMC) Status Register
+// ========== Register definition for RSTC peripheral ========== 
+#define AT91C_RSTC_RCR            (0xFFFFFD00) // (RSTC) Reset Control Register
+#define AT91C_RSTC_RMR            (0xFFFFFD08) // (RSTC) Reset Mode Register
+#define AT91C_RSTC_RSR            (0xFFFFFD04) // (RSTC) Reset Status Register
+// ========== Register definition for RTTC peripheral ========== 
+#define AT91C_RTTC_RTSR           (0xFFFFFD2C) // (RTTC) Real-time Status Register
+#define AT91C_RTTC_RTMR           (0xFFFFFD20) // (RTTC) Real-time Mode Register
+#define AT91C_RTTC_RTVR           (0xFFFFFD28) // (RTTC) Real-time Value Register
+#define AT91C_RTTC_RTAR           (0xFFFFFD24) // (RTTC) Real-time Alarm Register
+// ========== Register definition for PITC peripheral ========== 
+#define AT91C_PITC_PIVR           (0xFFFFFD38) // (PITC) Period Interval Value Register
+#define AT91C_PITC_PISR           (0xFFFFFD34) // (PITC) Period Interval Status Register
+#define AT91C_PITC_PIIR           (0xFFFFFD3C) // (PITC) Period Interval Image Register
+#define AT91C_PITC_PIMR           (0xFFFFFD30) // (PITC) Period Interval Mode Register
+// ========== Register definition for WDTC peripheral ========== 
+#define AT91C_WDTC_WDCR           (0xFFFFFD40) // (WDTC) Watchdog Control Register
+#define AT91C_WDTC_WDSR           (0xFFFFFD48) // (WDTC) Watchdog Status Register
+#define AT91C_WDTC_WDMR           (0xFFFFFD44) // (WDTC) Watchdog Mode Register
+// ========== Register definition for VREG peripheral ========== 
+#define AT91C_VREG_MR             (0xFFFFFD60) // (VREG) Voltage Regulator Mode Register
+// ========== Register definition for MC peripheral ========== 
+#define AT91C_MC_ASR              (0xFFFFFF04) // (MC) MC Abort Status Register
+#define AT91C_MC_RCR              (0xFFFFFF00) // (MC) MC Remap Control Register
+#define AT91C_MC_FCR              (0xFFFFFF64) // (MC) MC Flash Command Register
+#define AT91C_MC_AASR             (0xFFFFFF08) // (MC) MC Abort Address Status Register
+#define AT91C_MC_FSR              (0xFFFFFF68) // (MC) MC Flash Status Register
+#define AT91C_MC_FMR              (0xFFFFFF60) // (MC) MC Flash Mode Register
+// ========== Register definition for PDC_SPI1 peripheral ========== 
+#define AT91C_SPI1_PTCR           (0xFFFE4120) // (PDC_SPI1) PDC Transfer Control Register
+#define AT91C_SPI1_RPR            (0xFFFE4100) // (PDC_SPI1) Receive Pointer Register
+#define AT91C_SPI1_TNCR           (0xFFFE411C) // (PDC_SPI1) Transmit Next Counter Register
+#define AT91C_SPI1_TPR            (0xFFFE4108) // (PDC_SPI1) Transmit Pointer Register
+#define AT91C_SPI1_TNPR           (0xFFFE4118) // (PDC_SPI1) Transmit Next Pointer Register
+#define AT91C_SPI1_TCR            (0xFFFE410C) // (PDC_SPI1) Transmit Counter Register
+#define AT91C_SPI1_RCR            (0xFFFE4104) // (PDC_SPI1) Receive Counter Register
+#define AT91C_SPI1_RNPR           (0xFFFE4110) // (PDC_SPI1) Receive Next Pointer Register
+#define AT91C_SPI1_RNCR           (0xFFFE4114) // (PDC_SPI1) Receive Next Counter Register
+#define AT91C_SPI1_PTSR           (0xFFFE4124) // (PDC_SPI1) PDC Transfer Status Register
+// ========== Register definition for SPI1 peripheral ========== 
+#define AT91C_SPI1_IMR            (0xFFFE401C) // (SPI1) Interrupt Mask Register
+#define AT91C_SPI1_IER            (0xFFFE4014) // (SPI1) Interrupt Enable Register
+#define AT91C_SPI1_MR             (0xFFFE4004) // (SPI1) Mode Register
+#define AT91C_SPI1_RDR            (0xFFFE4008) // (SPI1) Receive Data Register
+#define AT91C_SPI1_IDR            (0xFFFE4018) // (SPI1) Interrupt Disable Register
+#define AT91C_SPI1_SR             (0xFFFE4010) // (SPI1) Status Register
+#define AT91C_SPI1_TDR            (0xFFFE400C) // (SPI1) Transmit Data Register
+#define AT91C_SPI1_CR             (0xFFFE4000) // (SPI1) Control Register
+#define AT91C_SPI1_CSR            (0xFFFE4030) // (SPI1) Chip Select Register
+// ========== Register definition for PDC_SPI0 peripheral ========== 
+#define AT91C_SPI0_PTCR           (0xFFFE0120) // (PDC_SPI0) PDC Transfer Control Register
+#define AT91C_SPI0_TPR            (0xFFFE0108) // (PDC_SPI0) Transmit Pointer Register
+#define AT91C_SPI0_TCR            (0xFFFE010C) // (PDC_SPI0) Transmit Counter Register
+#define AT91C_SPI0_RCR            (0xFFFE0104) // (PDC_SPI0) Receive Counter Register
+#define AT91C_SPI0_PTSR           (0xFFFE0124) // (PDC_SPI0) PDC Transfer Status Register
+#define AT91C_SPI0_RNPR           (0xFFFE0110) // (PDC_SPI0) Receive Next Pointer Register
+#define AT91C_SPI0_RPR            (0xFFFE0100) // (PDC_SPI0) Receive Pointer Register
+#define AT91C_SPI0_TNCR           (0xFFFE011C) // (PDC_SPI0) Transmit Next Counter Register
+#define AT91C_SPI0_RNCR           (0xFFFE0114) // (PDC_SPI0) Receive Next Counter Register
+#define AT91C_SPI0_TNPR           (0xFFFE0118) // (PDC_SPI0) Transmit Next Pointer Register
+// ========== Register definition for SPI0 peripheral ========== 
+#define AT91C_SPI0_IER            (0xFFFE0014) // (SPI0) Interrupt Enable Register
+#define AT91C_SPI0_SR             (0xFFFE0010) // (SPI0) Status Register
+#define AT91C_SPI0_IDR            (0xFFFE0018) // (SPI0) Interrupt Disable Register
+#define AT91C_SPI0_CR             (0xFFFE0000) // (SPI0) Control Register
+#define AT91C_SPI0_MR             (0xFFFE0004) // (SPI0) Mode Register
+#define AT91C_SPI0_IMR            (0xFFFE001C) // (SPI0) Interrupt Mask Register
+#define AT91C_SPI0_TDR            (0xFFFE000C) // (SPI0) Transmit Data Register
+#define AT91C_SPI0_RDR            (0xFFFE0008) // (SPI0) Receive Data Register
+#define AT91C_SPI0_CSR            (0xFFFE0030) // (SPI0) Chip Select Register
+// ========== Register definition for PDC_US1 peripheral ========== 
+#define AT91C_US1_RNCR            (0xFFFC4114) // (PDC_US1) Receive Next Counter Register
+#define AT91C_US1_PTCR            (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register
+#define AT91C_US1_TCR             (0xFFFC410C) // (PDC_US1) Transmit Counter Register
+#define AT91C_US1_PTSR            (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register
+#define AT91C_US1_TNPR            (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register
+#define AT91C_US1_RCR             (0xFFFC4104) // (PDC_US1) Receive Counter Register
+#define AT91C_US1_RNPR            (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register
+#define AT91C_US1_RPR             (0xFFFC4100) // (PDC_US1) Receive Pointer Register
+#define AT91C_US1_TNCR            (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register
+#define AT91C_US1_TPR             (0xFFFC4108) // (PDC_US1) Transmit Pointer Register
+// ========== Register definition for US1 peripheral ========== 
+#define AT91C_US1_IF              (0xFFFC404C) // (US1) IRDA_FILTER Register
+#define AT91C_US1_NER             (0xFFFC4044) // (US1) Nb Errors Register
+#define AT91C_US1_RTOR            (0xFFFC4024) // (US1) Receiver Time-out Register
+#define AT91C_US1_CSR             (0xFFFC4014) // (US1) Channel Status Register
+#define AT91C_US1_IDR             (0xFFFC400C) // (US1) Interrupt Disable Register
+#define AT91C_US1_IER             (0xFFFC4008) // (US1) Interrupt Enable Register
+#define AT91C_US1_THR             (0xFFFC401C) // (US1) Transmitter Holding Register
+#define AT91C_US1_TTGR            (0xFFFC4028) // (US1) Transmitter Time-guard Register
+#define AT91C_US1_RHR             (0xFFFC4018) // (US1) Receiver Holding Register
+#define AT91C_US1_BRGR            (0xFFFC4020) // (US1) Baud Rate Generator Register
+#define AT91C_US1_IMR             (0xFFFC4010) // (US1) Interrupt Mask Register
+#define AT91C_US1_FIDI            (0xFFFC4040) // (US1) FI_DI_Ratio Register
+#define AT91C_US1_CR              (0xFFFC4000) // (US1) Control Register
+#define AT91C_US1_MR              (0xFFFC4004) // (US1) Mode Register
+// ========== Register definition for PDC_US0 peripheral ========== 
+#define AT91C_US0_TNPR            (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register
+#define AT91C_US0_RNPR            (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register
+#define AT91C_US0_TCR             (0xFFFC010C) // (PDC_US0) Transmit Counter Register
+#define AT91C_US0_PTCR            (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register
+#define AT91C_US0_PTSR            (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register
+#define AT91C_US0_TNCR            (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register
+#define AT91C_US0_TPR             (0xFFFC0108) // (PDC_US0) Transmit Pointer Register
+#define AT91C_US0_RCR             (0xFFFC0104) // (PDC_US0) Receive Counter Register
+#define AT91C_US0_RPR             (0xFFFC0100) // (PDC_US0) Receive Pointer Register
+#define AT91C_US0_RNCR            (0xFFFC0114) // (PDC_US0) Receive Next Counter Register
+// ========== Register definition for US0 peripheral ========== 
+#define AT91C_US0_BRGR            (0xFFFC0020) // (US0) Baud Rate Generator Register
+#define AT91C_US0_NER             (0xFFFC0044) // (US0) Nb Errors Register
+#define AT91C_US0_CR              (0xFFFC0000) // (US0) Control Register
+#define AT91C_US0_IMR             (0xFFFC0010) // (US0) Interrupt Mask Register
+#define AT91C_US0_FIDI            (0xFFFC0040) // (US0) FI_DI_Ratio Register
+#define AT91C_US0_TTGR            (0xFFFC0028) // (US0) Transmitter Time-guard Register
+#define AT91C_US0_MR              (0xFFFC0004) // (US0) Mode Register
+#define AT91C_US0_RTOR            (0xFFFC0024) // (US0) Receiver Time-out Register
+#define AT91C_US0_CSR             (0xFFFC0014) // (US0) Channel Status Register
+#define AT91C_US0_RHR             (0xFFFC0018) // (US0) Receiver Holding Register
+#define AT91C_US0_IDR             (0xFFFC000C) // (US0) Interrupt Disable Register
+#define AT91C_US0_THR             (0xFFFC001C) // (US0) Transmitter Holding Register
+#define AT91C_US0_IF              (0xFFFC004C) // (US0) IRDA_FILTER Register
+#define AT91C_US0_IER             (0xFFFC0008) // (US0) Interrupt Enable Register
+// ========== Register definition for PDC_SSC peripheral ========== 
+#define AT91C_SSC_TNCR            (0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register
+#define AT91C_SSC_RPR             (0xFFFD4100) // (PDC_SSC) Receive Pointer Register
+#define AT91C_SSC_RNCR            (0xFFFD4114) // (PDC_SSC) Receive Next Counter Register
+#define AT91C_SSC_TPR             (0xFFFD4108) // (PDC_SSC) Transmit Pointer Register
+#define AT91C_SSC_PTCR            (0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register
+#define AT91C_SSC_TCR             (0xFFFD410C) // (PDC_SSC) Transmit Counter Register
+#define AT91C_SSC_RCR             (0xFFFD4104) // (PDC_SSC) Receive Counter Register
+#define AT91C_SSC_RNPR            (0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register
+#define AT91C_SSC_TNPR            (0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register
+#define AT91C_SSC_PTSR            (0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register
+// ========== Register definition for SSC peripheral ========== 
+#define AT91C_SSC_RHR             (0xFFFD4020) // (SSC) Receive Holding Register
+#define AT91C_SSC_RSHR            (0xFFFD4030) // (SSC) Receive Sync Holding Register
+#define AT91C_SSC_TFMR            (0xFFFD401C) // (SSC) Transmit Frame Mode Register
+#define AT91C_SSC_IDR             (0xFFFD4048) // (SSC) Interrupt Disable Register
+#define AT91C_SSC_THR             (0xFFFD4024) // (SSC) Transmit Holding Register
+#define AT91C_SSC_RCMR            (0xFFFD4010) // (SSC) Receive Clock ModeRegister
+#define AT91C_SSC_IER             (0xFFFD4044) // (SSC) Interrupt Enable Register
+#define AT91C_SSC_TSHR            (0xFFFD4034) // (SSC) Transmit Sync Holding Register
+#define AT91C_SSC_SR              (0xFFFD4040) // (SSC) Status Register
+#define AT91C_SSC_CMR             (0xFFFD4004) // (SSC) Clock Mode Register
+#define AT91C_SSC_TCMR            (0xFFFD4018) // (SSC) Transmit Clock Mode Register
+#define AT91C_SSC_CR              (0xFFFD4000) // (SSC) Control Register
+#define AT91C_SSC_IMR             (0xFFFD404C) // (SSC) Interrupt Mask Register
+#define AT91C_SSC_RFMR            (0xFFFD4014) // (SSC) Receive Frame Mode Register
+// ========== Register definition for TWI peripheral ========== 
+#define AT91C_TWI_IER             (0xFFFB8024) // (TWI) Interrupt Enable Register
+#define AT91C_TWI_CR              (0xFFFB8000) // (TWI) Control Register
+#define AT91C_TWI_SR              (0xFFFB8020) // (TWI) Status Register
+#define AT91C_TWI_IMR             (0xFFFB802C) // (TWI) Interrupt Mask Register
+#define AT91C_TWI_THR             (0xFFFB8034) // (TWI) Transmit Holding Register
+#define AT91C_TWI_IDR             (0xFFFB8028) // (TWI) Interrupt Disable Register
+#define AT91C_TWI_IADR            (0xFFFB800C) // (TWI) Internal Address Register
+#define AT91C_TWI_MMR             (0xFFFB8004) // (TWI) Master Mode Register
+#define AT91C_TWI_CWGR            (0xFFFB8010) // (TWI) Clock Waveform Generator Register
+#define AT91C_TWI_RHR             (0xFFFB8030) // (TWI) Receive Holding Register
+// ========== Register definition for PWMC_CH3 peripheral ========== 
+#define AT91C_PWMC_CH3_CUPDR      (0xFFFCC270) // (PWMC_CH3) Channel Update Register
+#define AT91C_PWMC_CH3_Reserved   (0xFFFCC274) // (PWMC_CH3) Reserved
+#define AT91C_PWMC_CH3_CPRDR      (0xFFFCC268) // (PWMC_CH3) Channel Period Register
+#define AT91C_PWMC_CH3_CDTYR      (0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register
+#define AT91C_PWMC_CH3_CCNTR      (0xFFFCC26C) // (PWMC_CH3) Channel Counter Register
+#define AT91C_PWMC_CH3_CMR        (0xFFFCC260) // (PWMC_CH3) Channel Mode Register
+// ========== Register definition for PWMC_CH2 peripheral ========== 
+#define AT91C_PWMC_CH2_Reserved   (0xFFFCC254) // (PWMC_CH2) Reserved
+#define AT91C_PWMC_CH2_CMR        (0xFFFCC240) // (PWMC_CH2) Channel Mode Register
+#define AT91C_PWMC_CH2_CCNTR      (0xFFFCC24C) // (PWMC_CH2) Channel Counter Register
+#define AT91C_PWMC_CH2_CPRDR      (0xFFFCC248) // (PWMC_CH2) Channel Period Register
+#define AT91C_PWMC_CH2_CUPDR      (0xFFFCC250) // (PWMC_CH2) Channel Update Register
+#define AT91C_PWMC_CH2_CDTYR      (0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register
+// ========== Register definition for PWMC_CH1 peripheral ========== 
+#define AT91C_PWMC_CH1_Reserved   (0xFFFCC234) // (PWMC_CH1) Reserved
+#define AT91C_PWMC_CH1_CUPDR      (0xFFFCC230) // (PWMC_CH1) Channel Update Register
+#define AT91C_PWMC_CH1_CPRDR      (0xFFFCC228) // (PWMC_CH1) Channel Period Register
+#define AT91C_PWMC_CH1_CCNTR      (0xFFFCC22C) // (PWMC_CH1) Channel Counter Register
+#define AT91C_PWMC_CH1_CDTYR      (0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register
+#define AT91C_PWMC_CH1_CMR        (0xFFFCC220) // (PWMC_CH1) Channel Mode Register
+// ========== Register definition for PWMC_CH0 peripheral ========== 
+#define AT91C_PWMC_CH0_Reserved   (0xFFFCC214) // (PWMC_CH0) Reserved
+#define AT91C_PWMC_CH0_CPRDR      (0xFFFCC208) // (PWMC_CH0) Channel Period Register
+#define AT91C_PWMC_CH0_CDTYR      (0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register
+#define AT91C_PWMC_CH0_CMR        (0xFFFCC200) // (PWMC_CH0) Channel Mode Register
+#define AT91C_PWMC_CH0_CUPDR      (0xFFFCC210) // (PWMC_CH0) Channel Update Register
+#define AT91C_PWMC_CH0_CCNTR      (0xFFFCC20C) // (PWMC_CH0) Channel Counter Register
+// ========== Register definition for PWMC peripheral ========== 
+#define AT91C_PWMC_IDR            (0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register
+#define AT91C_PWMC_DIS            (0xFFFCC008) // (PWMC) PWMC Disable Register
+#define AT91C_PWMC_IER            (0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register
+#define AT91C_PWMC_VR             (0xFFFCC0FC) // (PWMC) PWMC Version Register
+#define AT91C_PWMC_ISR            (0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register
+#define AT91C_PWMC_SR             (0xFFFCC00C) // (PWMC) PWMC Status Register
+#define AT91C_PWMC_IMR            (0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register
+#define AT91C_PWMC_MR             (0xFFFCC000) // (PWMC) PWMC Mode Register
+#define AT91C_PWMC_ENA            (0xFFFCC004) // (PWMC) PWMC Enable Register
+// ========== Register definition for UDP peripheral ========== 
+#define AT91C_UDP_IMR             (0xFFFB0018) // (UDP) Interrupt Mask Register
+#define AT91C_UDP_FADDR           (0xFFFB0008) // (UDP) Function Address Register
+#define AT91C_UDP_NUM             (0xFFFB0000) // (UDP) Frame Number Register
+#define AT91C_UDP_FDR             (0xFFFB0050) // (UDP) Endpoint FIFO Data Register
+#define AT91C_UDP_ISR             (0xFFFB001C) // (UDP) Interrupt Status Register
+#define AT91C_UDP_CSR             (0xFFFB0030) // (UDP) Endpoint Control and Status Register
+#define AT91C_UDP_IDR             (0xFFFB0014) // (UDP) Interrupt Disable Register
+#define AT91C_UDP_ICR             (0xFFFB0020) // (UDP) Interrupt Clear Register
+#define AT91C_UDP_RSTEP           (0xFFFB0028) // (UDP) Reset Endpoint Register
+#define AT91C_UDP_TXVC            (0xFFFB0074) // (UDP) Transceiver Control Register
+#define AT91C_UDP_GLBSTATE        (0xFFFB0004) // (UDP) Global State Register
+#define AT91C_UDP_IER             (0xFFFB0010) // (UDP) Interrupt Enable Register
+// ========== Register definition for TC0 peripheral ========== 
+#define AT91C_TC0_SR              (0xFFFA0020) // (TC0) Status Register
+#define AT91C_TC0_RC              (0xFFFA001C) // (TC0) Register C
+#define AT91C_TC0_RB              (0xFFFA0018) // (TC0) Register B
+#define AT91C_TC0_CCR             (0xFFFA0000) // (TC0) Channel Control Register
+#define AT91C_TC0_CMR             (0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC0_IER             (0xFFFA0024) // (TC0) Interrupt Enable Register
+#define AT91C_TC0_RA              (0xFFFA0014) // (TC0) Register A
+#define AT91C_TC0_IDR             (0xFFFA0028) // (TC0) Interrupt Disable Register
+#define AT91C_TC0_CV              (0xFFFA0010) // (TC0) Counter Value
+#define AT91C_TC0_IMR             (0xFFFA002C) // (TC0) Interrupt Mask Register
+// ========== Register definition for TC1 peripheral ========== 
+#define AT91C_TC1_RB              (0xFFFA0058) // (TC1) Register B
+#define AT91C_TC1_CCR             (0xFFFA0040) // (TC1) Channel Control Register
+#define AT91C_TC1_IER             (0xFFFA0064) // (TC1) Interrupt Enable Register
+#define AT91C_TC1_IDR             (0xFFFA0068) // (TC1) Interrupt Disable Register
+#define AT91C_TC1_SR              (0xFFFA0060) // (TC1) Status Register
+#define AT91C_TC1_CMR             (0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC1_RA              (0xFFFA0054) // (TC1) Register A
+#define AT91C_TC1_RC              (0xFFFA005C) // (TC1) Register C
+#define AT91C_TC1_IMR             (0xFFFA006C) // (TC1) Interrupt Mask Register
+#define AT91C_TC1_CV              (0xFFFA0050) // (TC1) Counter Value
+// ========== Register definition for TC2 peripheral ========== 
+#define AT91C_TC2_CMR             (0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
+#define AT91C_TC2_CCR             (0xFFFA0080) // (TC2) Channel Control Register
+#define AT91C_TC2_CV              (0xFFFA0090) // (TC2) Counter Value
+#define AT91C_TC2_RA              (0xFFFA0094) // (TC2) Register A
+#define AT91C_TC2_RB              (0xFFFA0098) // (TC2) Register B
+#define AT91C_TC2_IDR             (0xFFFA00A8) // (TC2) Interrupt Disable Register
+#define AT91C_TC2_IMR             (0xFFFA00AC) // (TC2) Interrupt Mask Register
+#define AT91C_TC2_RC              (0xFFFA009C) // (TC2) Register C
+#define AT91C_TC2_IER             (0xFFFA00A4) // (TC2) Interrupt Enable Register
+#define AT91C_TC2_SR              (0xFFFA00A0) // (TC2) Status Register
+// ========== Register definition for TCB peripheral ========== 
+#define AT91C_TCB_BMR             (0xFFFA00C4) // (TCB) TC Block Mode Register
+#define AT91C_TCB_BCR             (0xFFFA00C0) // (TCB) TC Block Control Register
+// ========== Register definition for CAN_MB0 peripheral ========== 
+#define AT91C_CAN_MB0_MDL         (0xFFFD0214) // (CAN_MB0) MailBox Data Low Register
+#define AT91C_CAN_MB0_MAM         (0xFFFD0204) // (CAN_MB0) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB0_MCR         (0xFFFD021C) // (CAN_MB0) MailBox Control Register
+#define AT91C_CAN_MB0_MID         (0xFFFD0208) // (CAN_MB0) MailBox ID Register
+#define AT91C_CAN_MB0_MSR         (0xFFFD0210) // (CAN_MB0) MailBox Status Register
+#define AT91C_CAN_MB0_MFID        (0xFFFD020C) // (CAN_MB0) MailBox Family ID Register
+#define AT91C_CAN_MB0_MDH         (0xFFFD0218) // (CAN_MB0) MailBox Data High Register
+#define AT91C_CAN_MB0_MMR         (0xFFFD0200) // (CAN_MB0) MailBox Mode Register
+// ========== Register definition for CAN_MB1 peripheral ========== 
+#define AT91C_CAN_MB1_MDL         (0xFFFD0234) // (CAN_MB1) MailBox Data Low Register
+#define AT91C_CAN_MB1_MID         (0xFFFD0228) // (CAN_MB1) MailBox ID Register
+#define AT91C_CAN_MB1_MMR         (0xFFFD0220) // (CAN_MB1) MailBox Mode Register
+#define AT91C_CAN_MB1_MSR         (0xFFFD0230) // (CAN_MB1) MailBox Status Register
+#define AT91C_CAN_MB1_MAM         (0xFFFD0224) // (CAN_MB1) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB1_MDH         (0xFFFD0238) // (CAN_MB1) MailBox Data High Register
+#define AT91C_CAN_MB1_MCR         (0xFFFD023C) // (CAN_MB1) MailBox Control Register
+#define AT91C_CAN_MB1_MFID        (0xFFFD022C) // (CAN_MB1) MailBox Family ID Register
+// ========== Register definition for CAN_MB2 peripheral ========== 
+#define AT91C_CAN_MB2_MCR         (0xFFFD025C) // (CAN_MB2) MailBox Control Register
+#define AT91C_CAN_MB2_MDH         (0xFFFD0258) // (CAN_MB2) MailBox Data High Register
+#define AT91C_CAN_MB2_MID         (0xFFFD0248) // (CAN_MB2) MailBox ID Register
+#define AT91C_CAN_MB2_MDL         (0xFFFD0254) // (CAN_MB2) MailBox Data Low Register
+#define AT91C_CAN_MB2_MMR         (0xFFFD0240) // (CAN_MB2) MailBox Mode Register
+#define AT91C_CAN_MB2_MAM         (0xFFFD0244) // (CAN_MB2) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB2_MFID        (0xFFFD024C) // (CAN_MB2) MailBox Family ID Register
+#define AT91C_CAN_MB2_MSR         (0xFFFD0250) // (CAN_MB2) MailBox Status Register
+// ========== Register definition for CAN_MB3 peripheral ========== 
+#define AT91C_CAN_MB3_MFID        (0xFFFD026C) // (CAN_MB3) MailBox Family ID Register
+#define AT91C_CAN_MB3_MAM         (0xFFFD0264) // (CAN_MB3) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB3_MID         (0xFFFD0268) // (CAN_MB3) MailBox ID Register
+#define AT91C_CAN_MB3_MCR         (0xFFFD027C) // (CAN_MB3) MailBox Control Register
+#define AT91C_CAN_MB3_MMR         (0xFFFD0260) // (CAN_MB3) MailBox Mode Register
+#define AT91C_CAN_MB3_MSR         (0xFFFD0270) // (CAN_MB3) MailBox Status Register
+#define AT91C_CAN_MB3_MDL         (0xFFFD0274) // (CAN_MB3) MailBox Data Low Register
+#define AT91C_CAN_MB3_MDH         (0xFFFD0278) // (CAN_MB3) MailBox Data High Register
+// ========== Register definition for CAN_MB4 peripheral ========== 
+#define AT91C_CAN_MB4_MID         (0xFFFD0288) // (CAN_MB4) MailBox ID Register
+#define AT91C_CAN_MB4_MMR         (0xFFFD0280) // (CAN_MB4) MailBox Mode Register
+#define AT91C_CAN_MB4_MDH         (0xFFFD0298) // (CAN_MB4) MailBox Data High Register
+#define AT91C_CAN_MB4_MFID        (0xFFFD028C) // (CAN_MB4) MailBox Family ID Register
+#define AT91C_CAN_MB4_MSR         (0xFFFD0290) // (CAN_MB4) MailBox Status Register
+#define AT91C_CAN_MB4_MCR         (0xFFFD029C) // (CAN_MB4) MailBox Control Register
+#define AT91C_CAN_MB4_MDL         (0xFFFD0294) // (CAN_MB4) MailBox Data Low Register
+#define AT91C_CAN_MB4_MAM         (0xFFFD0284) // (CAN_MB4) MailBox Acceptance Mask Register
+// ========== Register definition for CAN_MB5 peripheral ========== 
+#define AT91C_CAN_MB5_MSR         (0xFFFD02B0) // (CAN_MB5) MailBox Status Register
+#define AT91C_CAN_MB5_MCR         (0xFFFD02BC) // (CAN_MB5) MailBox Control Register
+#define AT91C_CAN_MB5_MFID        (0xFFFD02AC) // (CAN_MB5) MailBox Family ID Register
+#define AT91C_CAN_MB5_MDH         (0xFFFD02B8) // (CAN_MB5) MailBox Data High Register
+#define AT91C_CAN_MB5_MID         (0xFFFD02A8) // (CAN_MB5) MailBox ID Register
+#define AT91C_CAN_MB5_MMR         (0xFFFD02A0) // (CAN_MB5) MailBox Mode Register
+#define AT91C_CAN_MB5_MDL         (0xFFFD02B4) // (CAN_MB5) MailBox Data Low Register
+#define AT91C_CAN_MB5_MAM         (0xFFFD02A4) // (CAN_MB5) MailBox Acceptance Mask Register
+// ========== Register definition for CAN_MB6 peripheral ========== 
+#define AT91C_CAN_MB6_MFID        (0xFFFD02CC) // (CAN_MB6) MailBox Family ID Register
+#define AT91C_CAN_MB6_MID         (0xFFFD02C8) // (CAN_MB6) MailBox ID Register
+#define AT91C_CAN_MB6_MAM         (0xFFFD02C4) // (CAN_MB6) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB6_MSR         (0xFFFD02D0) // (CAN_MB6) MailBox Status Register
+#define AT91C_CAN_MB6_MDL         (0xFFFD02D4) // (CAN_MB6) MailBox Data Low Register
+#define AT91C_CAN_MB6_MCR         (0xFFFD02DC) // (CAN_MB6) MailBox Control Register
+#define AT91C_CAN_MB6_MDH         (0xFFFD02D8) // (CAN_MB6) MailBox Data High Register
+#define AT91C_CAN_MB6_MMR         (0xFFFD02C0) // (CAN_MB6) MailBox Mode Register
+// ========== Register definition for CAN_MB7 peripheral ========== 
+#define AT91C_CAN_MB7_MCR         (0xFFFD02FC) // (CAN_MB7) MailBox Control Register
+#define AT91C_CAN_MB7_MDH         (0xFFFD02F8) // (CAN_MB7) MailBox Data High Register
+#define AT91C_CAN_MB7_MFID        (0xFFFD02EC) // (CAN_MB7) MailBox Family ID Register
+#define AT91C_CAN_MB7_MDL         (0xFFFD02F4) // (CAN_MB7) MailBox Data Low Register
+#define AT91C_CAN_MB7_MID         (0xFFFD02E8) // (CAN_MB7) MailBox ID Register
+#define AT91C_CAN_MB7_MMR         (0xFFFD02E0) // (CAN_MB7) MailBox Mode Register
+#define AT91C_CAN_MB7_MAM         (0xFFFD02E4) // (CAN_MB7) MailBox Acceptance Mask Register
+#define AT91C_CAN_MB7_MSR         (0xFFFD02F0) // (CAN_MB7) MailBox Status Register
+// ========== Register definition for CAN peripheral ========== 
+#define AT91C_CAN_TCR             (0xFFFD0024) // (CAN) Transfer Command Register
+#define AT91C_CAN_IMR             (0xFFFD000C) // (CAN) Interrupt Mask Register
+#define AT91C_CAN_IER             (0xFFFD0004) // (CAN) Interrupt Enable Register
+#define AT91C_CAN_ECR             (0xFFFD0020) // (CAN) Error Counter Register
+#define AT91C_CAN_TIMESTP         (0xFFFD001C) // (CAN) Time Stamp Register
+#define AT91C_CAN_MR              (0xFFFD0000) // (CAN) Mode Register
+#define AT91C_CAN_IDR             (0xFFFD0008) // (CAN) Interrupt Disable Register
+#define AT91C_CAN_ACR             (0xFFFD0028) // (CAN) Abort Command Register
+#define AT91C_CAN_TIM             (0xFFFD0018) // (CAN) Timer Register
+#define AT91C_CAN_SR              (0xFFFD0010) // (CAN) Status Register
+#define AT91C_CAN_BR              (0xFFFD0014) // (CAN) Baudrate Register
+#define AT91C_CAN_VR              (0xFFFD00FC) // (CAN) Version Register
+// ========== Register definition for EMAC peripheral ========== 
+#define AT91C_EMAC_ISR            (0xFFFDC024) // (EMAC) Interrupt Status Register
+#define AT91C_EMAC_SA4H           (0xFFFDC0B4) // (EMAC) Specific Address 4 Top, Last 2 bytes
+#define AT91C_EMAC_SA1L           (0xFFFDC098) // (EMAC) Specific Address 1 Bottom, First 4 bytes
+#define AT91C_EMAC_ELE            (0xFFFDC078) // (EMAC) Excessive Length Errors Register
+#define AT91C_EMAC_LCOL           (0xFFFDC05C) // (EMAC) Late Collision Register
+#define AT91C_EMAC_RLE            (0xFFFDC088) // (EMAC) Receive Length Field Mismatch Register
+#define AT91C_EMAC_WOL            (0xFFFDC0C4) // (EMAC) Wake On LAN Register
+#define AT91C_EMAC_DTF            (0xFFFDC058) // (EMAC) Deferred Transmission Frame Register
+#define AT91C_EMAC_TUND           (0xFFFDC064) // (EMAC) Transmit Underrun Error Register
+#define AT91C_EMAC_NCR            (0xFFFDC000) // (EMAC) Network Control Register
+#define AT91C_EMAC_SA4L           (0xFFFDC0B0) // (EMAC) Specific Address 4 Bottom, First 4 bytes
+#define AT91C_EMAC_RSR            (0xFFFDC020) // (EMAC) Receive Status Register
+#define AT91C_EMAC_SA3L           (0xFFFDC0A8) // (EMAC) Specific Address 3 Bottom, First 4 bytes
+#define AT91C_EMAC_TSR            (0xFFFDC014) // (EMAC) Transmit Status Register
+#define AT91C_EMAC_IDR            (0xFFFDC02C) // (EMAC) Interrupt Disable Register
+#define AT91C_EMAC_RSE            (0xFFFDC074) // (EMAC) Receive Symbol Errors Register
+#define AT91C_EMAC_ECOL           (0xFFFDC060) // (EMAC) Excessive Collision Register
+#define AT91C_EMAC_TID            (0xFFFDC0B8) // (EMAC) Type ID Checking Register
+#define AT91C_EMAC_HRB            (0xFFFDC090) // (EMAC) Hash Address Bottom[31:0]
+#define AT91C_EMAC_TBQP           (0xFFFDC01C) // (EMAC) Transmit Buffer Queue Pointer
+#define AT91C_EMAC_USRIO          (0xFFFDC0C0) // (EMAC) USER Input/Output Register
+#define AT91C_EMAC_PTR            (0xFFFDC038) // (EMAC) Pause Time Register
+#define AT91C_EMAC_SA2H           (0xFFFDC0A4) // (EMAC) Specific Address 2 Top, Last 2 bytes
+#define AT91C_EMAC_ROV            (0xFFFDC070) // (EMAC) Receive Overrun Errors Register
+#define AT91C_EMAC_ALE            (0xFFFDC054) // (EMAC) Alignment Error Register
+#define AT91C_EMAC_RJA            (0xFFFDC07C) // (EMAC) Receive Jabbers Register
+#define AT91C_EMAC_RBQP           (0xFFFDC018) // (EMAC) Receive Buffer Queue Pointer
+#define AT91C_EMAC_TPF            (0xFFFDC08C) // (EMAC) Transmitted Pause Frames Register
+#define AT91C_EMAC_NCFGR          (0xFFFDC004) // (EMAC) Network Configuration Register
+#define AT91C_EMAC_HRT            (0xFFFDC094) // (EMAC) Hash Address Top[63:32]
+#define AT91C_EMAC_USF            (0xFFFDC080) // (EMAC) Undersize Frames Register
+#define AT91C_EMAC_FCSE           (0xFFFDC050) // (EMAC) Frame Check Sequence Error Register
+#define AT91C_EMAC_TPQ            (0xFFFDC0BC) // (EMAC) Transmit Pause Quantum Register
+#define AT91C_EMAC_MAN            (0xFFFDC034) // (EMAC) PHY Maintenance Register
+#define AT91C_EMAC_FTO            (0xFFFDC040) // (EMAC) Frames Transmitted OK Register
+#define AT91C_EMAC_REV            (0xFFFDC0FC) // (EMAC) Revision Register
+#define AT91C_EMAC_IMR            (0xFFFDC030) // (EMAC) Interrupt Mask Register
+#define AT91C_EMAC_SCF            (0xFFFDC044) // (EMAC) Single Collision Frame Register
+#define AT91C_EMAC_PFR            (0xFFFDC03C) // (EMAC) Pause Frames received Register
+#define AT91C_EMAC_MCF            (0xFFFDC048) // (EMAC) Multiple Collision Frame Register
+#define AT91C_EMAC_NSR            (0xFFFDC008) // (EMAC) Network Status Register
+#define AT91C_EMAC_SA2L           (0xFFFDC0A0) // (EMAC) Specific Address 2 Bottom, First 4 bytes
+#define AT91C_EMAC_FRO            (0xFFFDC04C) // (EMAC) Frames Received OK Register
+#define AT91C_EMAC_IER            (0xFFFDC028) // (EMAC) Interrupt Enable Register
+#define AT91C_EMAC_SA1H           (0xFFFDC09C) // (EMAC) Specific Address 1 Top, Last 2 bytes
+#define AT91C_EMAC_CSE            (0xFFFDC068) // (EMAC) Carrier Sense Error Register
+#define AT91C_EMAC_SA3H           (0xFFFDC0AC) // (EMAC) Specific Address 3 Top, Last 2 bytes
+#define AT91C_EMAC_RRE            (0xFFFDC06C) // (EMAC) Receive Ressource Error Register
+#define AT91C_EMAC_STE            (0xFFFDC084) // (EMAC) SQE Test Error Register
+// ========== Register definition for PDC_ADC peripheral ========== 
+#define AT91C_ADC_PTSR            (0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register
+#define AT91C_ADC_PTCR            (0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register
+#define AT91C_ADC_TNPR            (0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register
+#define AT91C_ADC_TNCR            (0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register
+#define AT91C_ADC_RNPR            (0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register
+#define AT91C_ADC_RNCR            (0xFFFD8114) // (PDC_ADC) Receive Next Counter Register
+#define AT91C_ADC_RPR             (0xFFFD8100) // (PDC_ADC) Receive Pointer Register
+#define AT91C_ADC_TCR             (0xFFFD810C) // (PDC_ADC) Transmit Counter Register
+#define AT91C_ADC_TPR             (0xFFFD8108) // (PDC_ADC) Transmit Pointer Register
+#define AT91C_ADC_RCR             (0xFFFD8104) // (PDC_ADC) Receive Counter Register
+// ========== Register definition for ADC peripheral ========== 
+#define AT91C_ADC_CDR2            (0xFFFD8038) // (ADC) ADC Channel Data Register 2
+#define AT91C_ADC_CDR3            (0xFFFD803C) // (ADC) ADC Channel Data Register 3
+#define AT91C_ADC_CDR0            (0xFFFD8030) // (ADC) ADC Channel Data Register 0
+#define AT91C_ADC_CDR5            (0xFFFD8044) // (ADC) ADC Channel Data Register 5
+#define AT91C_ADC_CHDR            (0xFFFD8014) // (ADC) ADC Channel Disable Register
+#define AT91C_ADC_SR              (0xFFFD801C) // (ADC) ADC Status Register
+#define AT91C_ADC_CDR4            (0xFFFD8040) // (ADC) ADC Channel Data Register 4
+#define AT91C_ADC_CDR1            (0xFFFD8034) // (ADC) ADC Channel Data Register 1
+#define AT91C_ADC_LCDR            (0xFFFD8020) // (ADC) ADC Last Converted Data Register
+#define AT91C_ADC_IDR             (0xFFFD8028) // (ADC) ADC Interrupt Disable Register
+#define AT91C_ADC_CR              (0xFFFD8000) // (ADC) ADC Control Register
+#define AT91C_ADC_CDR7            (0xFFFD804C) // (ADC) ADC Channel Data Register 7
+#define AT91C_ADC_CDR6            (0xFFFD8048) // (ADC) ADC Channel Data Register 6
+#define AT91C_ADC_IER             (0xFFFD8024) // (ADC) ADC Interrupt Enable Register
+#define AT91C_ADC_CHER            (0xFFFD8010) // (ADC) ADC Channel Enable Register
+#define AT91C_ADC_CHSR            (0xFFFD8018) // (ADC) ADC Channel Status Register
+#define AT91C_ADC_MR              (0xFFFD8004) // (ADC) ADC Mode Register
+#define AT91C_ADC_IMR             (0xFFFD802C) // (ADC) ADC Interrupt Mask Register
+
+// *****************************************************************************
+//               PIO DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_PIO_PA0             (1 <<  0) // Pin Controlled by PA0
+#define AT91C_PA0_RXD0            (AT91C_PIO_PA0) //  USART 0 Receive Data
+#define AT91C_PIO_PA1             (1 <<  1) // Pin Controlled by PA1
+#define AT91C_PA1_TXD0            (AT91C_PIO_PA1) //  USART 0 Transmit Data
+#define AT91C_PIO_PA10            (1 << 10) // Pin Controlled by PA10
+#define AT91C_PA10_TWD            (AT91C_PIO_PA10) //  TWI Two-wire Serial Data
+#define AT91C_PIO_PA11            (1 << 11) // Pin Controlled by PA11
+#define AT91C_PA11_TWCK           (AT91C_PIO_PA11) //  TWI Two-wire Serial Clock
+#define AT91C_PIO_PA12            (1 << 12) // Pin Controlled by PA12
+#define AT91C_PA12_SPI0_NPCS0     (AT91C_PIO_PA12) //  SPI 0 Peripheral Chip Select 0
+#define AT91C_PIO_PA13            (1 << 13) // Pin Controlled by PA13
+#define AT91C_PA13_SPI0_NPCS1     (AT91C_PIO_PA13) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PA13_PCK1           (AT91C_PIO_PA13) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PA14            (1 << 14) // Pin Controlled by PA14
+#define AT91C_PA14_SPI0_NPCS2     (AT91C_PIO_PA14) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PA14_IRQ1           (AT91C_PIO_PA14) //  External Interrupt 1
+#define AT91C_PIO_PA15            (1 << 15) // Pin Controlled by PA15
+#define AT91C_PA15_SPI0_NPCS3     (AT91C_PIO_PA15) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PA15_TCLK2          (AT91C_PIO_PA15) //  Timer Counter 2 external clock input
+#define AT91C_PIO_PA16            (1 << 16) // Pin Controlled by PA16
+#define AT91C_PA16_SPI0_MISO      (AT91C_PIO_PA16) //  SPI 0 Master In Slave
+#define AT91C_PIO_PA17            (1 << 17) // Pin Controlled by PA17
+#define AT91C_PA17_SPI0_MOSI      (AT91C_PIO_PA17) //  SPI 0 Master Out Slave
+#define AT91C_PIO_PA18            (1 << 18) // Pin Controlled by PA18
+#define AT91C_PA18_SPI0_SPCK      (AT91C_PIO_PA18) //  SPI 0 Serial Clock
+#define AT91C_PIO_PA19            (1 << 19) // Pin Controlled by PA19
+#define AT91C_PA19_CANRX          (AT91C_PIO_PA19) //  CAN Receive
+#define AT91C_PIO_PA2             (1 <<  2) // Pin Controlled by PA2
+#define AT91C_PA2_SCK0            (AT91C_PIO_PA2) //  USART 0 Serial Clock
+#define AT91C_PA2_SPI1_NPCS1      (AT91C_PIO_PA2) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PA20            (1 << 20) // Pin Controlled by PA20
+#define AT91C_PA20_CANTX          (AT91C_PIO_PA20) //  CAN Transmit
+#define AT91C_PIO_PA21            (1 << 21) // Pin Controlled by PA21
+#define AT91C_PA21_TF             (AT91C_PIO_PA21) //  SSC Transmit Frame Sync
+#define AT91C_PA21_SPI1_NPCS0     (AT91C_PIO_PA21) //  SPI 1 Peripheral Chip Select 0
+#define AT91C_PIO_PA22            (1 << 22) // Pin Controlled by PA22
+#define AT91C_PA22_TK             (AT91C_PIO_PA22) //  SSC Transmit Clock
+#define AT91C_PA22_SPI1_SPCK      (AT91C_PIO_PA22) //  SPI 1 Serial Clock
+#define AT91C_PIO_PA23            (1 << 23) // Pin Controlled by PA23
+#define AT91C_PA23_TD             (AT91C_PIO_PA23) //  SSC Transmit data
+#define AT91C_PA23_SPI1_MOSI      (AT91C_PIO_PA23) //  SPI 1 Master Out Slave
+#define AT91C_PIO_PA24            (1 << 24) // Pin Controlled by PA24
+#define AT91C_PA24_RD             (AT91C_PIO_PA24) //  SSC Receive Data
+#define AT91C_PA24_SPI1_MISO      (AT91C_PIO_PA24) //  SPI 1 Master In Slave
+#define AT91C_PIO_PA25            (1 << 25) // Pin Controlled by PA25
+#define AT91C_PA25_RK             (AT91C_PIO_PA25) //  SSC Receive Clock
+#define AT91C_PA25_SPI1_NPCS1     (AT91C_PIO_PA25) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PA26            (1 << 26) // Pin Controlled by PA26
+#define AT91C_PA26_RF             (AT91C_PIO_PA26) //  SSC Receive Frame Sync
+#define AT91C_PA26_SPI1_NPCS2     (AT91C_PIO_PA26) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PA27            (1 << 27) // Pin Controlled by PA27
+#define AT91C_PA27_DRXD           (AT91C_PIO_PA27) //  DBGU Debug Receive Data
+#define AT91C_PA27_PCK3           (AT91C_PIO_PA27) //  PMC Programmable Clock Output 3
+#define AT91C_PIO_PA28            (1 << 28) // Pin Controlled by PA28
+#define AT91C_PA28_DTXD           (AT91C_PIO_PA28) //  DBGU Debug Transmit Data
+#define AT91C_PIO_PA29            (1 << 29) // Pin Controlled by PA29
+#define AT91C_PA29_FIQ            (AT91C_PIO_PA29) //  AIC Fast Interrupt Input
+#define AT91C_PA29_SPI1_NPCS3     (AT91C_PIO_PA29) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PA3             (1 <<  3) // Pin Controlled by PA3
+#define AT91C_PA3_RTS0            (AT91C_PIO_PA3) //  USART 0 Ready To Send
+#define AT91C_PA3_SPI1_NPCS2      (AT91C_PIO_PA3) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PA30            (1 << 30) // Pin Controlled by PA30
+#define AT91C_PA30_IRQ0           (AT91C_PIO_PA30) //  External Interrupt 0
+#define AT91C_PA30_PCK2           (AT91C_PIO_PA30) //  PMC Programmable Clock Output 2
+#define AT91C_PIO_PA4             (1 <<  4) // Pin Controlled by PA4
+#define AT91C_PA4_CTS0            (AT91C_PIO_PA4) //  USART 0 Clear To Send
+#define AT91C_PA4_SPI1_NPCS3      (AT91C_PIO_PA4) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PA5             (1 <<  5) // Pin Controlled by PA5
+#define AT91C_PA5_RXD1            (AT91C_PIO_PA5) //  USART 1 Receive Data
+#define AT91C_PIO_PA6             (1 <<  6) // Pin Controlled by PA6
+#define AT91C_PA6_TXD1            (AT91C_PIO_PA6) //  USART 1 Transmit Data
+#define AT91C_PIO_PA7             (1 <<  7) // Pin Controlled by PA7
+#define AT91C_PA7_SCK1            (AT91C_PIO_PA7) //  USART 1 Serial Clock
+#define AT91C_PA7_SPI0_NPCS1      (AT91C_PIO_PA7) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PIO_PA8             (1 <<  8) // Pin Controlled by PA8
+#define AT91C_PA8_RTS1            (AT91C_PIO_PA8) //  USART 1 Ready To Send
+#define AT91C_PA8_SPI0_NPCS2      (AT91C_PIO_PA8) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PIO_PA9             (1 <<  9) // Pin Controlled by PA9
+#define AT91C_PA9_CTS1            (AT91C_PIO_PA9) //  USART 1 Clear To Send
+#define AT91C_PA9_SPI0_NPCS3      (AT91C_PIO_PA9) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PIO_PB0             (1 <<  0) // Pin Controlled by PB0
+#define AT91C_PB0_ETXCK_EREFCK    (AT91C_PIO_PB0) //  Ethernet MAC Transmit Clock/Reference Clock
+#define AT91C_PB0_PCK0            (AT91C_PIO_PB0) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB1             (1 <<  1) // Pin Controlled by PB1
+#define AT91C_PB1_ETXEN           (AT91C_PIO_PB1) //  Ethernet MAC Transmit Enable
+#define AT91C_PIO_PB10            (1 << 10) // Pin Controlled by PB10
+#define AT91C_PB10_ETX2           (AT91C_PIO_PB10) //  Ethernet MAC Transmit Data 2
+#define AT91C_PB10_SPI1_NPCS1     (AT91C_PIO_PB10) //  SPI 1 Peripheral Chip Select 1
+#define AT91C_PIO_PB11            (1 << 11) // Pin Controlled by PB11
+#define AT91C_PB11_ETX3           (AT91C_PIO_PB11) //  Ethernet MAC Transmit Data 3
+#define AT91C_PB11_SPI1_NPCS2     (AT91C_PIO_PB11) //  SPI 1 Peripheral Chip Select 2
+#define AT91C_PIO_PB12            (1 << 12) // Pin Controlled by PB12
+#define AT91C_PB12_ETXER          (AT91C_PIO_PB12) //  Ethernet MAC Transmikt Coding Error
+#define AT91C_PB12_TCLK0          (AT91C_PIO_PB12) //  Timer Counter 0 external clock input
+#define AT91C_PIO_PB13            (1 << 13) // Pin Controlled by PB13
+#define AT91C_PB13_ERX2           (AT91C_PIO_PB13) //  Ethernet MAC Receive Data 2
+#define AT91C_PB13_SPI0_NPCS1     (AT91C_PIO_PB13) //  SPI 0 Peripheral Chip Select 1
+#define AT91C_PIO_PB14            (1 << 14) // Pin Controlled by PB14
+#define AT91C_PB14_ERX3           (AT91C_PIO_PB14) //  Ethernet MAC Receive Data 3
+#define AT91C_PB14_SPI0_NPCS2     (AT91C_PIO_PB14) //  SPI 0 Peripheral Chip Select 2
+#define AT91C_PIO_PB15            (1 << 15) // Pin Controlled by PB15
+#define AT91C_PB15_ERXDV_ECRSDV   (AT91C_PIO_PB15) //  Ethernet MAC Receive Data Valid
+#define AT91C_PIO_PB16            (1 << 16) // Pin Controlled by PB16
+#define AT91C_PB16_ECOL           (AT91C_PIO_PB16) //  Ethernet MAC Collision Detected
+#define AT91C_PB16_SPI1_NPCS3     (AT91C_PIO_PB16) //  SPI 1 Peripheral Chip Select 3
+#define AT91C_PIO_PB17            (1 << 17) // Pin Controlled by PB17
+#define AT91C_PB17_ERXCK          (AT91C_PIO_PB17) //  Ethernet MAC Receive Clock
+#define AT91C_PB17_SPI0_NPCS3     (AT91C_PIO_PB17) //  SPI 0 Peripheral Chip Select 3
+#define AT91C_PIO_PB18            (1 << 18) // Pin Controlled by PB18
+#define AT91C_PB18_EF100          (AT91C_PIO_PB18) //  Ethernet MAC Force 100 Mbits/sec
+#define AT91C_PB18_ADTRG          (AT91C_PIO_PB18) //  ADC External Trigger
+#define AT91C_PIO_PB19            (1 << 19) // Pin Controlled by PB19
+#define AT91C_PB19_PWM0           (AT91C_PIO_PB19) //  PWM Channel 0
+#define AT91C_PB19_TCLK1          (AT91C_PIO_PB19) //  Timer Counter 1 external clock input
+#define AT91C_PIO_PB2             (1 <<  2) // Pin Controlled by PB2
+#define AT91C_PB2_ETX0            (AT91C_PIO_PB2) //  Ethernet MAC Transmit Data 0
+#define AT91C_PIO_PB20            (1 << 20) // Pin Controlled by PB20
+#define AT91C_PB20_PWM1           (AT91C_PIO_PB20) //  PWM Channel 1
+#define AT91C_PB20_PCK0           (AT91C_PIO_PB20) //  PMC Programmable Clock Output 0
+#define AT91C_PIO_PB21            (1 << 21) // Pin Controlled by PB21
+#define AT91C_PB21_PWM2           (AT91C_PIO_PB21) //  PWM Channel 2
+#define AT91C_PB21_PCK1           (AT91C_PIO_PB21) //  PMC Programmable Clock Output 1
+#define AT91C_PIO_PB22            (1 << 22) // Pin Controlled by PB22
+#define AT91C_PB22_PWM3           (AT91C_PIO_PB22) //  PWM Channel 3
+#define AT91C_PB22_PCK2           (AT91C_PIO_PB22) //  PMC Programmable Clock Output 2
+#define AT91C_PIO_PB23            (1 << 23) // Pin Controlled by PB23
+#define AT91C_PB23_TIOA0          (AT91C_PIO_PB23) //  Timer Counter 0 Multipurpose Timer I/O Pin A
+#define AT91C_PB23_DCD1           (AT91C_PIO_PB23) //  USART 1 Data Carrier Detect
+#define AT91C_PIO_PB24            (1 << 24) // Pin Controlled by PB24
+#define AT91C_PB24_TIOB0          (AT91C_PIO_PB24) //  Timer Counter 0 Multipurpose Timer I/O Pin B
+#define AT91C_PB24_DSR1           (AT91C_PIO_PB24) //  USART 1 Data Set ready
+#define AT91C_PIO_PB25            (1 << 25) // Pin Controlled by PB25
+#define AT91C_PB25_TIOA1          (AT91C_PIO_PB25) //  Timer Counter 1 Multipurpose Timer I/O Pin A
+#define AT91C_PB25_DTR1           (AT91C_PIO_PB25) //  USART 1 Data Terminal ready
+#define AT91C_PIO_PB26            (1 << 26) // Pin Controlled by PB26
+#define AT91C_PB26_TIOB1          (AT91C_PIO_PB26) //  Timer Counter 1 Multipurpose Timer I/O Pin B
+#define AT91C_PB26_RI1            (AT91C_PIO_PB26) //  USART 1 Ring Indicator
+#define AT91C_PIO_PB27            (1 << 27) // Pin Controlled by PB27
+#define AT91C_PB27_TIOA2          (AT91C_PIO_PB27) //  Timer Counter 2 Multipurpose Timer I/O Pin A
+#define AT91C_PB27_PWM0           (AT91C_PIO_PB27) //  PWM Channel 0
+#define AT91C_PIO_PB28            (1 << 28) // Pin Controlled by PB28
+#define AT91C_PB28_TIOB2          (AT91C_PIO_PB28) //  Timer Counter 2 Multipurpose Timer I/O Pin B
+#define AT91C_PB28_PWM1           (AT91C_PIO_PB28) //  PWM Channel 1
+#define AT91C_PIO_PB29            (1 << 29) // Pin Controlled by PB29
+#define AT91C_PB29_PCK1           (AT91C_PIO_PB29) //  PMC Programmable Clock Output 1
+#define AT91C_PB29_PWM2           (AT91C_PIO_PB29) //  PWM Channel 2
+#define AT91C_PIO_PB3             (1 <<  3) // Pin Controlled by PB3
+#define AT91C_PB3_ETX1            (AT91C_PIO_PB3) //  Ethernet MAC Transmit Data 1
+#define AT91C_PIO_PB30            (1 << 30) // Pin Controlled by PB30
+#define AT91C_PB30_PCK2           (AT91C_PIO_PB30) //  PMC Programmable Clock Output 2
+#define AT91C_PB30_PWM3           (AT91C_PIO_PB30) //  PWM Channel 3
+#define AT91C_PIO_PB4             (1 <<  4) // Pin Controlled by PB4
+#define AT91C_PB4_ECRS            (AT91C_PIO_PB4) //  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+#define AT91C_PIO_PB5             (1 <<  5) // Pin Controlled by PB5
+#define AT91C_PB5_ERX0            (AT91C_PIO_PB5) //  Ethernet MAC Receive Data 0
+#define AT91C_PIO_PB6             (1 <<  6) // Pin Controlled by PB6
+#define AT91C_PB6_ERX1            (AT91C_PIO_PB6) //  Ethernet MAC Receive Data 1
+#define AT91C_PIO_PB7             (1 <<  7) // Pin Controlled by PB7
+#define AT91C_PB7_ERXER           (AT91C_PIO_PB7) //  Ethernet MAC Receive Error
+#define AT91C_PIO_PB8             (1 <<  8) // Pin Controlled by PB8
+#define AT91C_PB8_EMDC            (AT91C_PIO_PB8) //  Ethernet MAC Management Data Clock
+#define AT91C_PIO_PB9             (1 <<  9) // Pin Controlled by PB9
+#define AT91C_PB9_EMDIO           (AT91C_PIO_PB9) //  Ethernet MAC Management Data Input/Output
+
+// *****************************************************************************
+//               PERIPHERAL ID DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_ID_FIQ              ( 0) // Advanced Interrupt Controller (FIQ)
+#define AT91C_ID_SYS              ( 1) // System Peripheral
+#define AT91C_ID_PIOA             ( 2) // Parallel IO Controller A
+#define AT91C_ID_PIOB             ( 3) // Parallel IO Controller B
+#define AT91C_ID_SPI0             ( 4) // Serial Peripheral Interface 0
+#define AT91C_ID_SPI1             ( 5) // Serial Peripheral Interface 1
+#define AT91C_ID_US0              ( 6) // USART 0
+#define AT91C_ID_US1              ( 7) // USART 1
+#define AT91C_ID_SSC              ( 8) // Serial Synchronous Controller
+#define AT91C_ID_TWI              ( 9) // Two-Wire Interface
+#define AT91C_ID_PWMC             (10) // PWM Controller
+#define AT91C_ID_UDP              (11) // USB Device Port
+#define AT91C_ID_TC0              (12) // Timer Counter 0
+#define AT91C_ID_TC1              (13) // Timer Counter 1
+#define AT91C_ID_TC2              (14) // Timer Counter 2
+#define AT91C_ID_CAN              (15) // Control Area Network Controller
+#define AT91C_ID_EMAC             (16) // Ethernet MAC
+#define AT91C_ID_ADC              (17) // Analog-to-Digital Converter
+#define AT91C_ID_18_Reserved      (18) // Reserved
+#define AT91C_ID_19_Reserved      (19) // Reserved
+#define AT91C_ID_20_Reserved      (20) // Reserved
+#define AT91C_ID_21_Reserved      (21) // Reserved
+#define AT91C_ID_22_Reserved      (22) // Reserved
+#define AT91C_ID_23_Reserved      (23) // Reserved
+#define AT91C_ID_24_Reserved      (24) // Reserved
+#define AT91C_ID_25_Reserved      (25) // Reserved
+#define AT91C_ID_26_Reserved      (26) // Reserved
+#define AT91C_ID_27_Reserved      (27) // Reserved
+#define AT91C_ID_28_Reserved      (28) // Reserved
+#define AT91C_ID_29_Reserved      (29) // Reserved
+#define AT91C_ID_IRQ0             (30) // Advanced Interrupt Controller (IRQ0)
+#define AT91C_ID_IRQ1             (31) // Advanced Interrupt Controller (IRQ1)
+#define AT91C_ALL_INT             (0xC003FFFF) // ALL VALID INTERRUPTS
+
+// *****************************************************************************
+//               BASE ADDRESS DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+#define AT91C_BASE_SYS            (0xFFFFF000) // (SYS) Base Address
+#define AT91C_BASE_AIC            (0xFFFFF000) // (AIC) Base Address
+#define AT91C_BASE_PDC_DBGU       (0xFFFFF300) // (PDC_DBGU) Base Address
+#define AT91C_BASE_DBGU           (0xFFFFF200) // (DBGU) Base Address
+#define AT91C_BASE_PIOA           (0xFFFFF400) // (PIOA) Base Address
+#define AT91C_BASE_PIOB           (0xFFFFF600) // (PIOB) Base Address
+#define AT91C_BASE_CKGR           (0xFFFFFC20) // (CKGR) Base Address
+#define AT91C_BASE_PMC            (0xFFFFFC00) // (PMC) Base Address
+#define AT91C_BASE_RSTC           (0xFFFFFD00) // (RSTC) Base Address
+#define AT91C_BASE_RTTC           (0xFFFFFD20) // (RTTC) Base Address
+#define AT91C_BASE_PITC           (0xFFFFFD30) // (PITC) Base Address
+#define AT91C_BASE_WDTC           (0xFFFFFD40) // (WDTC) Base Address
+#define AT91C_BASE_VREG           (0xFFFFFD60) // (VREG) Base Address
+#define AT91C_BASE_MC             (0xFFFFFF00) // (MC) Base Address
+#define AT91C_BASE_PDC_SPI1       (0xFFFE4100) // (PDC_SPI1) Base Address
+#define AT91C_BASE_SPI1           (0xFFFE4000) // (SPI1) Base Address
+#define AT91C_BASE_PDC_SPI0       (0xFFFE0100) // (PDC_SPI0) Base Address
+#define AT91C_BASE_SPI0           (0xFFFE0000) // (SPI0) Base Address
+#define AT91C_BASE_PDC_US1        (0xFFFC4100) // (PDC_US1) Base Address
+#define AT91C_BASE_US1            (0xFFFC4000) // (US1) Base Address
+#define AT91C_BASE_PDC_US0        (0xFFFC0100) // (PDC_US0) Base Address
+#define AT91C_BASE_US0            (0xFFFC0000) // (US0) Base Address
+#define AT91C_BASE_PDC_SSC        (0xFFFD4100) // (PDC_SSC) Base Address
+#define AT91C_BASE_SSC            (0xFFFD4000) // (SSC) Base Address
+#define AT91C_BASE_TWI            (0xFFFB8000) // (TWI) Base Address
+#define AT91C_BASE_PWMC_CH3       (0xFFFCC260) // (PWMC_CH3) Base Address
+#define AT91C_BASE_PWMC_CH2       (0xFFFCC240) // (PWMC_CH2) Base Address
+#define AT91C_BASE_PWMC_CH1       (0xFFFCC220) // (PWMC_CH1) Base Address
+#define AT91C_BASE_PWMC_CH0       (0xFFFCC200) // (PWMC_CH0) Base Address
+#define AT91C_BASE_PWMC           (0xFFFCC000) // (PWMC) Base Address
+#define AT91C_BASE_UDP            (0xFFFB0000) // (UDP) Base Address
+#define AT91C_BASE_TC0            (0xFFFA0000) // (TC0) Base Address
+#define AT91C_BASE_TC1            (0xFFFA0040) // (TC1) Base Address
+#define AT91C_BASE_TC2            (0xFFFA0080) // (TC2) Base Address
+#define AT91C_BASE_TCB            (0xFFFA0000) // (TCB) Base Address
+#define AT91C_BASE_CAN_MB0        (0xFFFD0200) // (CAN_MB0) Base Address
+#define AT91C_BASE_CAN_MB1        (0xFFFD0220) // (CAN_MB1) Base Address
+#define AT91C_BASE_CAN_MB2        (0xFFFD0240) // (CAN_MB2) Base Address
+#define AT91C_BASE_CAN_MB3        (0xFFFD0260) // (CAN_MB3) Base Address
+#define AT91C_BASE_CAN_MB4        (0xFFFD0280) // (CAN_MB4) Base Address
+#define AT91C_BASE_CAN_MB5        (0xFFFD02A0) // (CAN_MB5) Base Address
+#define AT91C_BASE_CAN_MB6        (0xFFFD02C0) // (CAN_MB6) Base Address
+#define AT91C_BASE_CAN_MB7        (0xFFFD02E0) // (CAN_MB7) Base Address
+#define AT91C_BASE_CAN            (0xFFFD0000) // (CAN) Base Address
+#define AT91C_BASE_EMAC           (0xFFFDC000) // (EMAC) Base Address
+#define AT91C_BASE_PDC_ADC        (0xFFFD8100) // (PDC_ADC) Base Address
+#define AT91C_BASE_ADC            (0xFFFD8000) // (ADC) Base Address
+
+// *****************************************************************************
+//               MEMORY MAPPING DEFINITIONS FOR AT91SAM7X256
+// *****************************************************************************
+// ISRAM
+#define AT91C_ISRAM	              (0x00200000) // Internal SRAM base address
+#define AT91C_ISRAM_SIZE	         (0x00010000) // Internal SRAM size in byte (64 Kbytes)
+// IFLASH
+#define AT91C_IFLASH	             (0x00100000) // Internal FLASH base address
+#define AT91C_IFLASH_SIZE	        (0x00040000) // Internal FLASH size in byte (256 Kbytes)
+#define AT91C_IFLASH_PAGE_SIZE	   (256) // Internal FLASH Page Size: 256 bytes
+#define AT91C_IFLASH_LOCK_REGION_SIZE	 (16384) // Internal FLASH Lock Region Size: 16 Kbytes
+#define AT91C_IFLASH_NB_OF_PAGES	 (1024) // Internal FLASH Number of Pages: 1024 bytes
+#define AT91C_IFLASH_NB_OF_LOCK_BITS	 (16) // Internal FLASH Number of Lock Bits: 16 bytes
+
+