ceedling 0.13.0.rc1 → 0.13.0

data/vendor/cmock/iar/iar_v4/cmock_demo.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\cmock_demo.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

data/vendor/cmock/iar/iar_v4/incIAR/AT91SAM7X-EK.h

@@ -0,0 +1,61 @@
+// ----------------------------------------------------------------------------
+//         ATMEL Microcontroller Software Support  -  ROUSSET  -
+// ----------------------------------------------------------------------------
+// DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// ----------------------------------------------------------------------------
+// File Name           : AT91SAM7X-EK.h
+// Object              : AT91SAM7X-EK Evaluation Board Features Definition File
+//
+//  ----------------------------------------------------------------------------
+
+#ifndef AT91SAM7X_EK_H
+#define AT91SAM7X_EK_H
+
+/*-----------------*/
+/* LEDs Definition */
+/*-----------------*/
+#define AT91B_LED1            (1<<19)       // AT91C_PIO_PB19 AT91C_PB19_PWM0 AT91C_PB19_TCLK1
+#define AT91B_LED2            (1<<20)       // AT91C_PIO_PB20 AT91C_PB20_PWM1 AT91C_PB20_PWM1
+#define AT91B_LED3            (AT91C_PIO_PB21)       // AT91C_PIO_PB21 AT91C_PB21_PWM2 AT91C_PB21_PCK1
+#define AT91B_LED4            (AT91C_PIO_PB22)       // AT91C_PIO_PB22 AT91C_PB22_PWM3 AT91C_PB22_PCK2
+#define AT91B_NB_LEB          4
+#define AT91B_LED_MASK        (AT91B_LED1|AT91B_LED2|AT91B_LED3|AT91B_LED4)
+#define AT91D_BASE_PIO_LED 	  (AT91C_BASE_PIOB)
+
+#define AT91B_POWERLED        (1<<25)       // PB25
+
+
+/*-------------------------------*/
+/* JOYSTICK Position Definition  */
+/*-------------------------------*/
+#define AT91B_SW1           (1<<21)  // PA21 Up Button	  AT91C_PA21_TF  AT91C_PA21_NPCS10
+#define AT91B_SW2           (1<<22)  // PA22 Down Button  AT91C_PA22_TK	 AT91C_PA22_SPCK1
+#define AT91B_SW3           (1<<23)  // PA23 Left Button  AT91C_PA23_TD  AT91C_PA23_MOSI1
+#define AT91B_SW4           (1<<24)  // PA24 Right Button AT91C_PA24_RD	 AT91C_PA24_MISO1
+#define AT91B_SW5           (1<<25)  // PA25 Push Button  AT91C_PA25_RK	 AT91C_PA25_NPCS11
+#define AT91B_SW_MASK       (AT91B_SW1|AT91B_SW2|AT91B_SW3|AT91B_SW4|AT91B_SW5)
+
+
+#define AT91D_BASE_PIO_SW   (AT91C_BASE_PIOA)
+
+/*------------------*/
+/* CAN Definition   */
+/*------------------*/
+#define AT91B_CAN_TRANSCEIVER_RS  (1<<2)    // PA2
+
+/*--------------*/
+/* Clocks       */
+/*--------------*/
+#define AT91B_MAIN_OSC        18432000               // Main Oscillator MAINCK
+#define AT91B_MCK             ((18432000*73/14)/2)   // Output PLL Clock
+
+#endif /* AT91SAM7X-EK_H */

data/vendor/cmock/iar/iar_v4/incIAR/AT91SAM7X256.inc

@@ -0,0 +1,2314 @@
+;-  ----------------------------------------------------------------------------
+;-          ATMEL Microcontroller Software Support  -  ROUSSET  -
+;-  ----------------------------------------------------------------------------
+;-  DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+;-  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+;-  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+;-  DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+;-  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+;-  OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+;-  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+;-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+;-  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;-  ----------------------------------------------------------------------------
+;- File Name           : AT91SAM7X256.h
+;- Object              : AT91SAM7X256 definitions
+;- Generated           : AT91 SW Application Group  11/02/2005 (15:17:24)
+;- 
+;- CVS Reference       : /AT91SAM7X256.pl/1.14/Tue Sep 13 15:06:52 2005//
+;- CVS Reference       : /SYS_SAM7X.pl/1.3/Tue Feb  1 17:01:43 2005//
+;- CVS Reference       : /MC_SAM7X.pl/1.2/Fri May 20 14:13:04 2005//
+;- CVS Reference       : /PMC_SAM7X.pl/1.4/Tue Feb  8 13:58:10 2005//
+;- CVS Reference       : /RSTC_SAM7X.pl/1.2/Wed Jul 13 14:57:50 2005//
+;- CVS Reference       : /UDP_SAM7X.pl/1.1/Tue May 10 11:35:35 2005//
+;- CVS Reference       : /PWM_SAM7X.pl/1.1/Tue May 10 11:53:07 2005//
+;- CVS Reference       : /AIC_6075B.pl/1.3/Fri May 20 14:01:30 2005//
+;- CVS Reference       : /PIO_6057A.pl/1.2/Thu Feb  3 10:18:28 2005//
+;- CVS Reference       : /RTTC_6081A.pl/1.2/Tue Nov  9 14:43:58 2004//
+;- CVS Reference       : /PITC_6079A.pl/1.2/Tue Nov  9 14:43:56 2004//
+;- CVS Reference       : /WDTC_6080A.pl/1.3/Tue Nov  9 14:44:00 2004//
+;- CVS Reference       : /VREG_6085B.pl/1.1/Tue Feb  1 16:05:48 2005//
+;- CVS Reference       : /PDC_6074C.pl/1.2/Thu Feb  3 08:48:54 2005//
+;- CVS Reference       : /DBGU_6059D.pl/1.1/Mon Jan 31 13:15:32 2005//
+;- CVS Reference       : /SPI_6088D.pl/1.3/Fri May 20 14:08:59 2005//
+;- CVS Reference       : /US_6089C.pl/1.1/Mon Jul 12 18:23:26 2004//
+;- CVS Reference       : /SSC_6078B.pl/1.1/Wed Jul 13 15:19:19 2005//
+;- CVS Reference       : /TWI_6061A.pl/1.1/Tue Jul 13 07:38:06 2004//
+;- CVS Reference       : /TC_6082A.pl/1.7/Fri Mar 11 12:52:17 2005//
+;- CVS Reference       : /CAN_6019B.pl/1.1/Tue Mar  8 12:42:22 2005//
+;- CVS Reference       : /EMACB_6119A.pl/1.6/Wed Jul 13 15:05:35 2005//
+;- CVS Reference       : /ADC_6051C.pl/1.1/Fri Oct 17 09:12:38 2003//
+;-  ----------------------------------------------------------------------------
+
+;- Hardware register definition
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR System Peripherals
+;- *****************************************************************************
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Advanced Interrupt Controller
+;- *****************************************************************************
+                ^ 0 ;- AT91S_AIC
+AIC_SMR         # 128 ;- Source Mode Register
+AIC_SVR         # 128 ;- Source Vector Register
+AIC_IVR         #  4 ;- IRQ Vector Register
+AIC_FVR         #  4 ;- FIQ Vector Register
+AIC_ISR         #  4 ;- Interrupt Status Register
+AIC_IPR         #  4 ;- Interrupt Pending Register
+AIC_IMR         #  4 ;- Interrupt Mask Register
+AIC_CISR        #  4 ;- Core Interrupt Status Register
+                #  8 ;- Reserved
+AIC_IECR        #  4 ;- Interrupt Enable Command Register
+AIC_IDCR        #  4 ;- Interrupt Disable Command Register
+AIC_ICCR        #  4 ;- Interrupt Clear Command Register
+AIC_ISCR        #  4 ;- Interrupt Set Command Register
+AIC_EOICR       #  4 ;- End of Interrupt Command Register
+AIC_SPU         #  4 ;- Spurious Vector Register
+AIC_DCR         #  4 ;- Debug Control Register (Protect)
+                #  4 ;- Reserved
+AIC_FFER        #  4 ;- Fast Forcing Enable Register
+AIC_FFDR        #  4 ;- Fast Forcing Disable Register
+AIC_FFSR        #  4 ;- Fast Forcing Status Register
+;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- 
+AT91C_AIC_PRIOR           EQU (0x7:SHL:0) ;- (AIC) Priority Level
+AT91C_AIC_PRIOR_LOWEST    EQU (0x0) ;- (AIC) Lowest priority level
+AT91C_AIC_PRIOR_HIGHEST   EQU (0x7) ;- (AIC) Highest priority level
+AT91C_AIC_SRCTYPE         EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type
+AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label High-level Sensitive
+AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL EQU (0x0:SHL:5) ;- (AIC) External Sources Code Label Low-level Sensitive
+AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Positive Edge triggered
+AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE EQU (0x1:SHL:5) ;- (AIC) External Sources Code Label Negative Edge triggered
+AT91C_AIC_SRCTYPE_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) Internal Or External Sources Code Label High-level Sensitive
+AT91C_AIC_SRCTYPE_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) Internal Or External Sources Code Label Positive Edge triggered
+;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- 
+AT91C_AIC_NFIQ            EQU (0x1:SHL:0) ;- (AIC) NFIQ Status
+AT91C_AIC_NIRQ            EQU (0x1:SHL:1) ;- (AIC) NIRQ Status
+;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- 
+AT91C_AIC_DCR_PROT        EQU (0x1:SHL:0) ;- (AIC) Protection Mode
+AT91C_AIC_DCR_GMSK        EQU (0x1:SHL:1) ;- (AIC) General Mask
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PDC
+PDC_RPR         #  4 ;- Receive Pointer Register
+PDC_RCR         #  4 ;- Receive Counter Register
+PDC_TPR         #  4 ;- Transmit Pointer Register
+PDC_TCR         #  4 ;- Transmit Counter Register
+PDC_RNPR        #  4 ;- Receive Next Pointer Register
+PDC_RNCR        #  4 ;- Receive Next Counter Register
+PDC_TNPR        #  4 ;- Transmit Next Pointer Register
+PDC_TNCR        #  4 ;- Transmit Next Counter Register
+PDC_PTCR        #  4 ;- PDC Transfer Control Register
+PDC_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
+AT91C_PDC_RXTEN           EQU (0x1:SHL:0) ;- (PDC) Receiver Transfer Enable
+AT91C_PDC_RXTDIS          EQU (0x1:SHL:1) ;- (PDC) Receiver Transfer Disable
+AT91C_PDC_TXTEN           EQU (0x1:SHL:8) ;- (PDC) Transmitter Transfer Enable
+AT91C_PDC_TXTDIS          EQU (0x1:SHL:9) ;- (PDC) Transmitter Transfer Disable
+;- -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Debug Unit
+;- *****************************************************************************
+                ^ 0 ;- AT91S_DBGU
+DBGU_CR         #  4 ;- Control Register
+DBGU_MR         #  4 ;- Mode Register
+DBGU_IER        #  4 ;- Interrupt Enable Register
+DBGU_IDR        #  4 ;- Interrupt Disable Register
+DBGU_IMR        #  4 ;- Interrupt Mask Register
+DBGU_CSR        #  4 ;- Channel Status Register
+DBGU_RHR        #  4 ;- Receiver Holding Register
+DBGU_THR        #  4 ;- Transmitter Holding Register
+DBGU_BRGR       #  4 ;- Baud Rate Generator Register
+                # 28 ;- Reserved
+DBGU_CIDR       #  4 ;- Chip ID Register
+DBGU_EXID       #  4 ;- Chip ID Extension Register
+DBGU_FNTR       #  4 ;- Force NTRST Register
+                # 180 ;- Reserved
+DBGU_RPR        #  4 ;- Receive Pointer Register
+DBGU_RCR        #  4 ;- Receive Counter Register
+DBGU_TPR        #  4 ;- Transmit Pointer Register
+DBGU_TCR        #  4 ;- Transmit Counter Register
+DBGU_RNPR       #  4 ;- Receive Next Pointer Register
+DBGU_RNCR       #  4 ;- Receive Next Counter Register
+DBGU_TNPR       #  4 ;- Transmit Next Pointer Register
+DBGU_TNCR       #  4 ;- Transmit Next Counter Register
+DBGU_PTCR       #  4 ;- PDC Transfer Control Register
+DBGU_PTSR       #  4 ;- PDC Transfer Status Register
+;- -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
+AT91C_US_RSTRX            EQU (0x1:SHL:2) ;- (DBGU) Reset Receiver
+AT91C_US_RSTTX            EQU (0x1:SHL:3) ;- (DBGU) Reset Transmitter
+AT91C_US_RXEN             EQU (0x1:SHL:4) ;- (DBGU) Receiver Enable
+AT91C_US_RXDIS            EQU (0x1:SHL:5) ;- (DBGU) Receiver Disable
+AT91C_US_TXEN             EQU (0x1:SHL:6) ;- (DBGU) Transmitter Enable
+AT91C_US_TXDIS            EQU (0x1:SHL:7) ;- (DBGU) Transmitter Disable
+AT91C_US_RSTSTA           EQU (0x1:SHL:8) ;- (DBGU) Reset Status Bits
+;- -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
+AT91C_US_PAR              EQU (0x7:SHL:9) ;- (DBGU) Parity type
+AT91C_US_PAR_EVEN         EQU (0x0:SHL:9) ;- (DBGU) Even Parity
+AT91C_US_PAR_ODD          EQU (0x1:SHL:9) ;- (DBGU) Odd Parity
+AT91C_US_PAR_SPACE        EQU (0x2:SHL:9) ;- (DBGU) Parity forced to 0 (Space)
+AT91C_US_PAR_MARK         EQU (0x3:SHL:9) ;- (DBGU) Parity forced to 1 (Mark)
+AT91C_US_PAR_NONE         EQU (0x4:SHL:9) ;- (DBGU) No Parity
+AT91C_US_PAR_MULTI_DROP   EQU (0x6:SHL:9) ;- (DBGU) Multi-drop mode
+AT91C_US_CHMODE           EQU (0x3:SHL:14) ;- (DBGU) Channel Mode
+AT91C_US_CHMODE_NORMAL    EQU (0x0:SHL:14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART.
+AT91C_US_CHMODE_AUTO      EQU (0x1:SHL:14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin.
+AT91C_US_CHMODE_LOCAL     EQU (0x2:SHL:14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal.
+AT91C_US_CHMODE_REMOTE    EQU (0x3:SHL:14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin.
+;- -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+AT91C_US_RXRDY            EQU (0x1:SHL:0) ;- (DBGU) RXRDY Interrupt
+AT91C_US_TXRDY            EQU (0x1:SHL:1) ;- (DBGU) TXRDY Interrupt
+AT91C_US_ENDRX            EQU (0x1:SHL:3) ;- (DBGU) End of Receive Transfer Interrupt
+AT91C_US_ENDTX            EQU (0x1:SHL:4) ;- (DBGU) End of Transmit Interrupt
+AT91C_US_OVRE             EQU (0x1:SHL:5) ;- (DBGU) Overrun Interrupt
+AT91C_US_FRAME            EQU (0x1:SHL:6) ;- (DBGU) Framing Error Interrupt
+AT91C_US_PARE             EQU (0x1:SHL:7) ;- (DBGU) Parity Error Interrupt
+AT91C_US_TXEMPTY          EQU (0x1:SHL:9) ;- (DBGU) TXEMPTY Interrupt
+AT91C_US_TXBUFE           EQU (0x1:SHL:11) ;- (DBGU) TXBUFE Interrupt
+AT91C_US_RXBUFF           EQU (0x1:SHL:12) ;- (DBGU) RXBUFF Interrupt
+AT91C_US_COMM_TX          EQU (0x1:SHL:30) ;- (DBGU) COMM_TX Interrupt
+AT91C_US_COMM_RX          EQU (0x1:SHL:31) ;- (DBGU) COMM_RX Interrupt
+;- -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+;- -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+;- -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- 
+;- -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- 
+AT91C_US_FORCE_NTRST      EQU (0x1:SHL:0) ;- (DBGU) Force NTRST in JTAG
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Parallel Input Output Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PIO
+PIO_PER         #  4 ;- PIO Enable Register
+PIO_PDR         #  4 ;- PIO Disable Register
+PIO_PSR         #  4 ;- PIO Status Register
+                #  4 ;- Reserved
+PIO_OER         #  4 ;- Output Enable Register
+PIO_ODR         #  4 ;- Output Disable Registerr
+PIO_OSR         #  4 ;- Output Status Register
+                #  4 ;- Reserved
+PIO_IFER        #  4 ;- Input Filter Enable Register
+PIO_IFDR        #  4 ;- Input Filter Disable Register
+PIO_IFSR        #  4 ;- Input Filter Status Register
+                #  4 ;- Reserved
+PIO_SODR        #  4 ;- Set Output Data Register
+PIO_CODR        #  4 ;- Clear Output Data Register
+PIO_ODSR        #  4 ;- Output Data Status Register
+PIO_PDSR        #  4 ;- Pin Data Status Register
+PIO_IER         #  4 ;- Interrupt Enable Register
+PIO_IDR         #  4 ;- Interrupt Disable Register
+PIO_IMR         #  4 ;- Interrupt Mask Register
+PIO_ISR         #  4 ;- Interrupt Status Register
+PIO_MDER        #  4 ;- Multi-driver Enable Register
+PIO_MDDR        #  4 ;- Multi-driver Disable Register
+PIO_MDSR        #  4 ;- Multi-driver Status Register
+                #  4 ;- Reserved
+PIO_PPUDR       #  4 ;- Pull-up Disable Register
+PIO_PPUER       #  4 ;- Pull-up Enable Register
+PIO_PPUSR       #  4 ;- Pull-up Status Register
+                #  4 ;- Reserved
+PIO_ASR         #  4 ;- Select A Register
+PIO_BSR         #  4 ;- Select B Register
+PIO_ABSR        #  4 ;- AB Select Status Register
+                # 36 ;- Reserved
+PIO_OWER        #  4 ;- Output Write Enable Register
+PIO_OWDR        #  4 ;- Output Write Disable Register
+PIO_OWSR        #  4 ;- Output Write Status Register
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Clock Generator Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_CKGR
+CKGR_MOR        #  4 ;- Main Oscillator Register
+CKGR_MCFR       #  4 ;- Main Clock  Frequency Register
+                #  4 ;- Reserved
+CKGR_PLLR       #  4 ;- PLL Register
+;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- 
+AT91C_CKGR_MOSCEN         EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable
+AT91C_CKGR_OSCBYPASS      EQU (0x1:SHL:1) ;- (CKGR) Main Oscillator Bypass
+AT91C_CKGR_OSCOUNT        EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time
+;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- 
+AT91C_CKGR_MAINF          EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency
+AT91C_CKGR_MAINRDY        EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready
+;- -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register -------- 
+AT91C_CKGR_DIV            EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected
+AT91C_CKGR_DIV_0          EQU (0x0) ;- (CKGR) Divider output is 0
+AT91C_CKGR_DIV_BYPASS     EQU (0x1) ;- (CKGR) Divider is bypassed
+AT91C_CKGR_PLLCOUNT       EQU (0x3F:SHL:8) ;- (CKGR) PLL Counter
+AT91C_CKGR_OUT            EQU (0x3:SHL:14) ;- (CKGR) PLL Output Frequency Range
+AT91C_CKGR_OUT_0          EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_1          EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_2          EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_OUT_3          EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLL datasheet
+AT91C_CKGR_MUL            EQU (0x7FF:SHL:16) ;- (CKGR) PLL Multiplier
+AT91C_CKGR_USBDIV         EQU (0x3:SHL:28) ;- (CKGR) Divider for USB Clocks
+AT91C_CKGR_USBDIV_0       EQU (0x0:SHL:28) ;- (CKGR) Divider output is PLL clock output
+AT91C_CKGR_USBDIV_1       EQU (0x1:SHL:28) ;- (CKGR) Divider output is PLL clock output divided by 2
+AT91C_CKGR_USBDIV_2       EQU (0x2:SHL:28) ;- (CKGR) Divider output is PLL clock output divided by 4
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Power Management Controler
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PMC
+PMC_SCER        #  4 ;- System Clock Enable Register
+PMC_SCDR        #  4 ;- System Clock Disable Register
+PMC_SCSR        #  4 ;- System Clock Status Register
+                #  4 ;- Reserved
+PMC_PCER        #  4 ;- Peripheral Clock Enable Register
+PMC_PCDR        #  4 ;- Peripheral Clock Disable Register
+PMC_PCSR        #  4 ;- Peripheral Clock Status Register
+                #  4 ;- Reserved
+PMC_MOR         #  4 ;- Main Oscillator Register
+PMC_MCFR        #  4 ;- Main Clock  Frequency Register
+                #  4 ;- Reserved
+PMC_PLLR        #  4 ;- PLL Register
+PMC_MCKR        #  4 ;- Master Clock Register
+                # 12 ;- Reserved
+PMC_PCKR        # 16 ;- Programmable Clock Register
+                # 16 ;- Reserved
+PMC_IER         #  4 ;- Interrupt Enable Register
+PMC_IDR         #  4 ;- Interrupt Disable Register
+PMC_SR          #  4 ;- Status Register
+PMC_IMR         #  4 ;- Interrupt Mask Register
+;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- 
+AT91C_PMC_PCK             EQU (0x1:SHL:0) ;- (PMC) Processor Clock
+AT91C_PMC_UDP             EQU (0x1:SHL:7) ;- (PMC) USB Device Port Clock
+AT91C_PMC_PCK0            EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK1            EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK2            EQU (0x1:SHL:10) ;- (PMC) Programmable Clock Output
+AT91C_PMC_PCK3            EQU (0x1:SHL:11) ;- (PMC) Programmable Clock Output
+;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- 
+;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- 
+;- -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- 
+;- -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- 
+;- -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register -------- 
+;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- 
+AT91C_PMC_CSS             EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection
+AT91C_PMC_CSS_SLOW_CLK    EQU (0x0) ;- (PMC) Slow Clock is selected
+AT91C_PMC_CSS_MAIN_CLK    EQU (0x1) ;- (PMC) Main Clock is selected
+AT91C_PMC_CSS_PLL_CLK     EQU (0x3) ;- (PMC) Clock from PLL is selected
+AT91C_PMC_PRES            EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler
+AT91C_PMC_PRES_CLK        EQU (0x0:SHL:2) ;- (PMC) Selected clock
+AT91C_PMC_PRES_CLK_2      EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2
+AT91C_PMC_PRES_CLK_4      EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4
+AT91C_PMC_PRES_CLK_8      EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8
+AT91C_PMC_PRES_CLK_16     EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16
+AT91C_PMC_PRES_CLK_32     EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32
+AT91C_PMC_PRES_CLK_64     EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64
+;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- 
+;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- 
+AT91C_PMC_MOSCS           EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask
+AT91C_PMC_LOCK            EQU (0x1:SHL:2) ;- (PMC) PLL Status/Enable/Disable/Mask
+AT91C_PMC_MCKRDY          EQU (0x1:SHL:3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK0RDY         EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK1RDY         EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK2RDY         EQU (0x1:SHL:10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask
+AT91C_PMC_PCK3RDY         EQU (0x1:SHL:11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask
+;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- 
+;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- 
+;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Reset Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_RSTC
+RSTC_RCR        #  4 ;- Reset Control Register
+RSTC_RSR        #  4 ;- Reset Status Register
+RSTC_RMR        #  4 ;- Reset Mode Register
+;- -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- 
+AT91C_RSTC_PROCRST        EQU (0x1:SHL:0) ;- (RSTC) Processor Reset
+AT91C_RSTC_PERRST         EQU (0x1:SHL:2) ;- (RSTC) Peripheral Reset
+AT91C_RSTC_EXTRST         EQU (0x1:SHL:3) ;- (RSTC) External Reset
+AT91C_RSTC_KEY            EQU (0xFF:SHL:24) ;- (RSTC) Password
+;- -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- 
+AT91C_RSTC_URSTS          EQU (0x1:SHL:0) ;- (RSTC) User Reset Status
+AT91C_RSTC_BODSTS         EQU (0x1:SHL:1) ;- (RSTC) Brownout Detection Status
+AT91C_RSTC_RSTTYP         EQU (0x7:SHL:8) ;- (RSTC) Reset Type
+AT91C_RSTC_RSTTYP_POWERUP EQU (0x0:SHL:8) ;- (RSTC) Power-up Reset. VDDCORE rising.
+AT91C_RSTC_RSTTYP_WAKEUP  EQU (0x1:SHL:8) ;- (RSTC) WakeUp Reset. VDDCORE rising.
+AT91C_RSTC_RSTTYP_WATCHDOG EQU (0x2:SHL:8) ;- (RSTC) Watchdog Reset. Watchdog overflow occured.
+AT91C_RSTC_RSTTYP_SOFTWARE EQU (0x3:SHL:8) ;- (RSTC) Software Reset. Processor reset required by the software.
+AT91C_RSTC_RSTTYP_USER    EQU (0x4:SHL:8) ;- (RSTC) User Reset. NRST pin detected low.
+AT91C_RSTC_RSTTYP_BROWNOUT EQU (0x5:SHL:8) ;- (RSTC) Brownout Reset occured.
+AT91C_RSTC_NRSTL          EQU (0x1:SHL:16) ;- (RSTC) NRST pin level
+AT91C_RSTC_SRCMP          EQU (0x1:SHL:17) ;- (RSTC) Software Reset Command in Progress.
+;- -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- 
+AT91C_RSTC_URSTEN         EQU (0x1:SHL:0) ;- (RSTC) User Reset Enable
+AT91C_RSTC_URSTIEN        EQU (0x1:SHL:4) ;- (RSTC) User Reset Interrupt Enable
+AT91C_RSTC_ERSTL          EQU (0xF:SHL:8) ;- (RSTC) User Reset Length
+AT91C_RSTC_BODIEN         EQU (0x1:SHL:16) ;- (RSTC) Brownout Detection Interrupt Enable
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Real Time Timer Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_RTTC
+RTTC_RTMR       #  4 ;- Real-time Mode Register
+RTTC_RTAR       #  4 ;- Real-time Alarm Register
+RTTC_RTVR       #  4 ;- Real-time Value Register
+RTTC_RTSR       #  4 ;- Real-time Status Register
+;- -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- 
+AT91C_RTTC_RTPRES         EQU (0xFFFF:SHL:0) ;- (RTTC) Real-time Timer Prescaler Value
+AT91C_RTTC_ALMIEN         EQU (0x1:SHL:16) ;- (RTTC) Alarm Interrupt Enable
+AT91C_RTTC_RTTINCIEN      EQU (0x1:SHL:17) ;- (RTTC) Real Time Timer Increment Interrupt Enable
+AT91C_RTTC_RTTRST         EQU (0x1:SHL:18) ;- (RTTC) Real Time Timer Restart
+;- -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- 
+AT91C_RTTC_ALMV           EQU (0x0:SHL:0) ;- (RTTC) Alarm Value
+;- -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- 
+AT91C_RTTC_CRTV           EQU (0x0:SHL:0) ;- (RTTC) Current Real-time Value
+;- -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- 
+AT91C_RTTC_ALMS           EQU (0x1:SHL:0) ;- (RTTC) Real-time Alarm Status
+AT91C_RTTC_RTTINC         EQU (0x1:SHL:1) ;- (RTTC) Real-time Timer Increment
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Periodic Interval Timer Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PITC
+PITC_PIMR       #  4 ;- Period Interval Mode Register
+PITC_PISR       #  4 ;- Period Interval Status Register
+PITC_PIVR       #  4 ;- Period Interval Value Register
+PITC_PIIR       #  4 ;- Period Interval Image Register
+;- -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- 
+AT91C_PITC_PIV            EQU (0xFFFFF:SHL:0) ;- (PITC) Periodic Interval Value
+AT91C_PITC_PITEN          EQU (0x1:SHL:24) ;- (PITC) Periodic Interval Timer Enabled
+AT91C_PITC_PITIEN         EQU (0x1:SHL:25) ;- (PITC) Periodic Interval Timer Interrupt Enable
+;- -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- 
+AT91C_PITC_PITS           EQU (0x1:SHL:0) ;- (PITC) Periodic Interval Timer Status
+;- -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- 
+AT91C_PITC_CPIV           EQU (0xFFFFF:SHL:0) ;- (PITC) Current Periodic Interval Value
+AT91C_PITC_PICNT          EQU (0xFFF:SHL:20) ;- (PITC) Periodic Interval Counter
+;- -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Watchdog Timer Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_WDTC
+WDTC_WDCR       #  4 ;- Watchdog Control Register
+WDTC_WDMR       #  4 ;- Watchdog Mode Register
+WDTC_WDSR       #  4 ;- Watchdog Status Register
+;- -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- 
+AT91C_WDTC_WDRSTT         EQU (0x1:SHL:0) ;- (WDTC) Watchdog Restart
+AT91C_WDTC_KEY            EQU (0xFF:SHL:24) ;- (WDTC) Watchdog KEY Password
+;- -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- 
+AT91C_WDTC_WDV            EQU (0xFFF:SHL:0) ;- (WDTC) Watchdog Timer Restart
+AT91C_WDTC_WDFIEN         EQU (0x1:SHL:12) ;- (WDTC) Watchdog Fault Interrupt Enable
+AT91C_WDTC_WDRSTEN        EQU (0x1:SHL:13) ;- (WDTC) Watchdog Reset Enable
+AT91C_WDTC_WDRPROC        EQU (0x1:SHL:14) ;- (WDTC) Watchdog Timer Restart
+AT91C_WDTC_WDDIS          EQU (0x1:SHL:15) ;- (WDTC) Watchdog Disable
+AT91C_WDTC_WDD            EQU (0xFFF:SHL:16) ;- (WDTC) Watchdog Delta Value
+AT91C_WDTC_WDDBGHLT       EQU (0x1:SHL:28) ;- (WDTC) Watchdog Debug Halt
+AT91C_WDTC_WDIDLEHLT      EQU (0x1:SHL:29) ;- (WDTC) Watchdog Idle Halt
+;- -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- 
+AT91C_WDTC_WDUNF          EQU (0x1:SHL:0) ;- (WDTC) Watchdog Underflow
+AT91C_WDTC_WDERR          EQU (0x1:SHL:1) ;- (WDTC) Watchdog Error
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_VREG
+VREG_MR         #  4 ;- Voltage Regulator Mode Register
+;- -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- 
+AT91C_VREG_PSTDBY         EQU (0x1:SHL:0) ;- (VREG) Voltage Regulator Power Standby Mode
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Memory Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_MC
+MC_RCR          #  4 ;- MC Remap Control Register
+MC_ASR          #  4 ;- MC Abort Status Register
+MC_AASR         #  4 ;- MC Abort Address Status Register
+                # 84 ;- Reserved
+MC_FMR          #  4 ;- MC Flash Mode Register
+MC_FCR          #  4 ;- MC Flash Command Register
+MC_FSR          #  4 ;- MC Flash Status Register
+;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
+AT91C_MC_RCB              EQU (0x1:SHL:0) ;- (MC) Remap Command Bit
+;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
+AT91C_MC_UNDADD           EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status
+AT91C_MC_MISADD           EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status
+AT91C_MC_ABTSZ            EQU (0x3:SHL:8) ;- (MC) Abort Size Status
+AT91C_MC_ABTSZ_BYTE       EQU (0x0:SHL:8) ;- (MC) Byte
+AT91C_MC_ABTSZ_HWORD      EQU (0x1:SHL:8) ;- (MC) Half-word
+AT91C_MC_ABTSZ_WORD       EQU (0x2:SHL:8) ;- (MC) Word
+AT91C_MC_ABTTYP           EQU (0x3:SHL:10) ;- (MC) Abort Type Status
+AT91C_MC_ABTTYP_DATAR     EQU (0x0:SHL:10) ;- (MC) Data Read
+AT91C_MC_ABTTYP_DATAW     EQU (0x1:SHL:10) ;- (MC) Data Write
+AT91C_MC_ABTTYP_FETCH     EQU (0x2:SHL:10) ;- (MC) Code Fetch
+AT91C_MC_MST0             EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source
+AT91C_MC_MST1             EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source
+AT91C_MC_SVMST0           EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source
+AT91C_MC_SVMST1           EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source
+;- -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register -------- 
+AT91C_MC_FRDY             EQU (0x1:SHL:0) ;- (MC) Flash Ready
+AT91C_MC_LOCKE            EQU (0x1:SHL:2) ;- (MC) Lock Error
+AT91C_MC_PROGE            EQU (0x1:SHL:3) ;- (MC) Programming Error
+AT91C_MC_NEBP             EQU (0x1:SHL:7) ;- (MC) No Erase Before Programming
+AT91C_MC_FWS              EQU (0x3:SHL:8) ;- (MC) Flash Wait State
+AT91C_MC_FWS_0FWS         EQU (0x0:SHL:8) ;- (MC) 1 cycle for Read, 2 for Write operations
+AT91C_MC_FWS_1FWS         EQU (0x1:SHL:8) ;- (MC) 2 cycles for Read, 3 for Write operations
+AT91C_MC_FWS_2FWS         EQU (0x2:SHL:8) ;- (MC) 3 cycles for Read, 4 for Write operations
+AT91C_MC_FWS_3FWS         EQU (0x3:SHL:8) ;- (MC) 4 cycles for Read, 4 for Write operations
+AT91C_MC_FMCN             EQU (0xFF:SHL:16) ;- (MC) Flash Microsecond Cycle Number
+;- -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register -------- 
+AT91C_MC_FCMD             EQU (0xF:SHL:0) ;- (MC) Flash Command
+AT91C_MC_FCMD_START_PROG  EQU (0x1) ;- (MC) Starts the programming of th epage specified by PAGEN.
+AT91C_MC_FCMD_LOCK        EQU (0x2) ;- (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+AT91C_MC_FCMD_PROG_AND_LOCK EQU (0x3) ;- (MC) The lock sequence automatically happens after the programming sequence is completed.
+AT91C_MC_FCMD_UNLOCK      EQU (0x4) ;- (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
+AT91C_MC_FCMD_ERASE_ALL   EQU (0x8) ;- (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
+AT91C_MC_FCMD_SET_GP_NVM  EQU (0xB) ;- (MC) Set General Purpose NVM bits.
+AT91C_MC_FCMD_CLR_GP_NVM  EQU (0xD) ;- (MC) Clear General Purpose NVM bits.
+AT91C_MC_FCMD_SET_SECURITY EQU (0xF) ;- (MC) Set Security Bit.
+AT91C_MC_PAGEN            EQU (0x3FF:SHL:8) ;- (MC) Page Number
+AT91C_MC_KEY              EQU (0xFF:SHL:24) ;- (MC) Writing Protect Key
+;- -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register -------- 
+AT91C_MC_SECURITY         EQU (0x1:SHL:4) ;- (MC) Security Bit Status
+AT91C_MC_GPNVM0           EQU (0x1:SHL:8) ;- (MC) Sector 0 Lock Status
+AT91C_MC_GPNVM1           EQU (0x1:SHL:9) ;- (MC) Sector 1 Lock Status
+AT91C_MC_GPNVM2           EQU (0x1:SHL:10) ;- (MC) Sector 2 Lock Status
+AT91C_MC_GPNVM3           EQU (0x1:SHL:11) ;- (MC) Sector 3 Lock Status
+AT91C_MC_GPNVM4           EQU (0x1:SHL:12) ;- (MC) Sector 4 Lock Status
+AT91C_MC_GPNVM5           EQU (0x1:SHL:13) ;- (MC) Sector 5 Lock Status
+AT91C_MC_GPNVM6           EQU (0x1:SHL:14) ;- (MC) Sector 6 Lock Status
+AT91C_MC_GPNVM7           EQU (0x1:SHL:15) ;- (MC) Sector 7 Lock Status
+AT91C_MC_LOCKS0           EQU (0x1:SHL:16) ;- (MC) Sector 0 Lock Status
+AT91C_MC_LOCKS1           EQU (0x1:SHL:17) ;- (MC) Sector 1 Lock Status
+AT91C_MC_LOCKS2           EQU (0x1:SHL:18) ;- (MC) Sector 2 Lock Status
+AT91C_MC_LOCKS3           EQU (0x1:SHL:19) ;- (MC) Sector 3 Lock Status
+AT91C_MC_LOCKS4           EQU (0x1:SHL:20) ;- (MC) Sector 4 Lock Status
+AT91C_MC_LOCKS5           EQU (0x1:SHL:21) ;- (MC) Sector 5 Lock Status
+AT91C_MC_LOCKS6           EQU (0x1:SHL:22) ;- (MC) Sector 6 Lock Status
+AT91C_MC_LOCKS7           EQU (0x1:SHL:23) ;- (MC) Sector 7 Lock Status
+AT91C_MC_LOCKS8           EQU (0x1:SHL:24) ;- (MC) Sector 8 Lock Status
+AT91C_MC_LOCKS9           EQU (0x1:SHL:25) ;- (MC) Sector 9 Lock Status
+AT91C_MC_LOCKS10          EQU (0x1:SHL:26) ;- (MC) Sector 10 Lock Status
+AT91C_MC_LOCKS11          EQU (0x1:SHL:27) ;- (MC) Sector 11 Lock Status
+AT91C_MC_LOCKS12          EQU (0x1:SHL:28) ;- (MC) Sector 12 Lock Status
+AT91C_MC_LOCKS13          EQU (0x1:SHL:29) ;- (MC) Sector 13 Lock Status
+AT91C_MC_LOCKS14          EQU (0x1:SHL:30) ;- (MC) Sector 14 Lock Status
+AT91C_MC_LOCKS15          EQU (0x1:SHL:31) ;- (MC) Sector 15 Lock Status
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SPI
+SPI_CR          #  4 ;- Control Register
+SPI_MR          #  4 ;- Mode Register
+SPI_RDR         #  4 ;- Receive Data Register
+SPI_TDR         #  4 ;- Transmit Data Register
+SPI_SR          #  4 ;- Status Register
+SPI_IER         #  4 ;- Interrupt Enable Register
+SPI_IDR         #  4 ;- Interrupt Disable Register
+SPI_IMR         #  4 ;- Interrupt Mask Register
+                # 16 ;- Reserved
+SPI_CSR         # 16 ;- Chip Select Register
+                # 192 ;- Reserved
+SPI_RPR         #  4 ;- Receive Pointer Register
+SPI_RCR         #  4 ;- Receive Counter Register
+SPI_TPR         #  4 ;- Transmit Pointer Register
+SPI_TCR         #  4 ;- Transmit Counter Register
+SPI_RNPR        #  4 ;- Receive Next Pointer Register
+SPI_RNCR        #  4 ;- Receive Next Counter Register
+SPI_TNPR        #  4 ;- Transmit Next Pointer Register
+SPI_TNCR        #  4 ;- Transmit Next Counter Register
+SPI_PTCR        #  4 ;- PDC Transfer Control Register
+SPI_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
+AT91C_SPI_SPIEN           EQU (0x1:SHL:0) ;- (SPI) SPI Enable
+AT91C_SPI_SPIDIS          EQU (0x1:SHL:1) ;- (SPI) SPI Disable
+AT91C_SPI_SWRST           EQU (0x1:SHL:7) ;- (SPI) SPI Software reset
+AT91C_SPI_LASTXFER        EQU (0x1:SHL:24) ;- (SPI) SPI Last Transfer
+;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
+AT91C_SPI_MSTR            EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode
+AT91C_SPI_PS              EQU (0x1:SHL:1) ;- (SPI) Peripheral Select
+AT91C_SPI_PS_FIXED        EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select
+AT91C_SPI_PS_VARIABLE     EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select
+AT91C_SPI_PCSDEC          EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode
+AT91C_SPI_FDIV            EQU (0x1:SHL:3) ;- (SPI) Clock Selection
+AT91C_SPI_MODFDIS         EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection
+AT91C_SPI_LLB             EQU (0x1:SHL:7) ;- (SPI) Clock Selection
+AT91C_SPI_PCS             EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select
+AT91C_SPI_DLYBCS          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects
+;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
+AT91C_SPI_RD              EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data
+AT91C_SPI_RPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
+;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
+AT91C_SPI_TD              EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data
+AT91C_SPI_TPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
+;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
+AT91C_SPI_RDRF            EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full
+AT91C_SPI_TDRE            EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty
+AT91C_SPI_MODF            EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error
+AT91C_SPI_OVRES           EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status
+AT91C_SPI_ENDRX           EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_ENDTX           EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer
+AT91C_SPI_RXBUFF          EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt
+AT91C_SPI_TXBUFE          EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt
+AT91C_SPI_NSSR            EQU (0x1:SHL:8) ;- (SPI) NSSR Interrupt
+AT91C_SPI_TXEMPTY         EQU (0x1:SHL:9) ;- (SPI) TXEMPTY Interrupt
+AT91C_SPI_SPIENS          EQU (0x1:SHL:16) ;- (SPI) Enable Status
+;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
+;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
+;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
+;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
+AT91C_SPI_CPOL            EQU (0x1:SHL:0) ;- (SPI) Clock Polarity
+AT91C_SPI_NCPHA           EQU (0x1:SHL:1) ;- (SPI) Clock Phase
+AT91C_SPI_CSAAT           EQU (0x1:SHL:3) ;- (SPI) Chip Select Active After Transfer
+AT91C_SPI_BITS            EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer
+AT91C_SPI_BITS_8          EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer
+AT91C_SPI_BITS_9          EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer
+AT91C_SPI_BITS_10         EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer
+AT91C_SPI_BITS_11         EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer
+AT91C_SPI_BITS_12         EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer
+AT91C_SPI_BITS_13         EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer
+AT91C_SPI_BITS_14         EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer
+AT91C_SPI_BITS_15         EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer
+AT91C_SPI_BITS_16         EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer
+AT91C_SPI_SCBR            EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate
+AT91C_SPI_DLYBS           EQU (0xFF:SHL:16) ;- (SPI) Delay Before SPCK
+AT91C_SPI_DLYBCT          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Usart
+;- *****************************************************************************
+                ^ 0 ;- AT91S_USART
+US_CR           #  4 ;- Control Register
+US_MR           #  4 ;- Mode Register
+US_IER          #  4 ;- Interrupt Enable Register
+US_IDR          #  4 ;- Interrupt Disable Register
+US_IMR          #  4 ;- Interrupt Mask Register
+US_CSR          #  4 ;- Channel Status Register
+US_RHR          #  4 ;- Receiver Holding Register
+US_THR          #  4 ;- Transmitter Holding Register
+US_BRGR         #  4 ;- Baud Rate Generator Register
+US_RTOR         #  4 ;- Receiver Time-out Register
+US_TTGR         #  4 ;- Transmitter Time-guard Register
+                # 20 ;- Reserved
+US_FIDI         #  4 ;- FI_DI_Ratio Register
+US_NER          #  4 ;- Nb Errors Register
+                #  4 ;- Reserved
+US_IF           #  4 ;- IRDA_FILTER Register
+                # 176 ;- Reserved
+US_RPR          #  4 ;- Receive Pointer Register
+US_RCR          #  4 ;- Receive Counter Register
+US_TPR          #  4 ;- Transmit Pointer Register
+US_TCR          #  4 ;- Transmit Counter Register
+US_RNPR         #  4 ;- Receive Next Pointer Register
+US_RNCR         #  4 ;- Receive Next Counter Register
+US_TNPR         #  4 ;- Transmit Next Pointer Register
+US_TNCR         #  4 ;- Transmit Next Counter Register
+US_PTCR         #  4 ;- PDC Transfer Control Register
+US_PTSR         #  4 ;- PDC Transfer Status Register
+;- -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- 
+AT91C_US_STTBRK           EQU (0x1:SHL:9) ;- (USART) Start Break
+AT91C_US_STPBRK           EQU (0x1:SHL:10) ;- (USART) Stop Break
+AT91C_US_STTTO            EQU (0x1:SHL:11) ;- (USART) Start Time-out
+AT91C_US_SENDA            EQU (0x1:SHL:12) ;- (USART) Send Address
+AT91C_US_RSTIT            EQU (0x1:SHL:13) ;- (USART) Reset Iterations
+AT91C_US_RSTNACK          EQU (0x1:SHL:14) ;- (USART) Reset Non Acknowledge
+AT91C_US_RETTO            EQU (0x1:SHL:15) ;- (USART) Rearm Time-out
+AT91C_US_DTREN            EQU (0x1:SHL:16) ;- (USART) Data Terminal ready Enable
+AT91C_US_DTRDIS           EQU (0x1:SHL:17) ;- (USART) Data Terminal ready Disable
+AT91C_US_RTSEN            EQU (0x1:SHL:18) ;- (USART) Request to Send enable
+AT91C_US_RTSDIS           EQU (0x1:SHL:19) ;- (USART) Request to Send Disable
+;- -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- 
+AT91C_US_USMODE           EQU (0xF:SHL:0) ;- (USART) Usart mode
+AT91C_US_USMODE_NORMAL    EQU (0x0) ;- (USART) Normal
+AT91C_US_USMODE_RS485     EQU (0x1) ;- (USART) RS485
+AT91C_US_USMODE_HWHSH     EQU (0x2) ;- (USART) Hardware Handshaking
+AT91C_US_USMODE_MODEM     EQU (0x3) ;- (USART) Modem
+AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0
+AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1
+AT91C_US_USMODE_IRDA      EQU (0x8) ;- (USART) IrDA
+AT91C_US_USMODE_SWHSH     EQU (0xC) ;- (USART) Software Handshaking
+AT91C_US_CLKS             EQU (0x3:SHL:4) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CLKS_CLOCK       EQU (0x0:SHL:4) ;- (USART) Clock
+AT91C_US_CLKS_FDIV1       EQU (0x1:SHL:4) ;- (USART) fdiv1
+AT91C_US_CLKS_SLOW        EQU (0x2:SHL:4) ;- (USART) slow_clock (ARM)
+AT91C_US_CLKS_EXT         EQU (0x3:SHL:4) ;- (USART) External (SCK)
+AT91C_US_CHRL             EQU (0x3:SHL:6) ;- (USART) Clock Selection (Baud Rate generator Input Clock
+AT91C_US_CHRL_5_BITS      EQU (0x0:SHL:6) ;- (USART) Character Length: 5 bits
+AT91C_US_CHRL_6_BITS      EQU (0x1:SHL:6) ;- (USART) Character Length: 6 bits
+AT91C_US_CHRL_7_BITS      EQU (0x2:SHL:6) ;- (USART) Character Length: 7 bits
+AT91C_US_CHRL_8_BITS      EQU (0x3:SHL:6) ;- (USART) Character Length: 8 bits
+AT91C_US_SYNC             EQU (0x1:SHL:8) ;- (USART) Synchronous Mode Select
+AT91C_US_NBSTOP           EQU (0x3:SHL:12) ;- (USART) Number of Stop bits
+AT91C_US_NBSTOP_1_BIT     EQU (0x0:SHL:12) ;- (USART) 1 stop bit
+AT91C_US_NBSTOP_15_BIT    EQU (0x1:SHL:12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits
+AT91C_US_NBSTOP_2_BIT     EQU (0x2:SHL:12) ;- (USART) 2 stop bits
+AT91C_US_MSBF             EQU (0x1:SHL:16) ;- (USART) Bit Order
+AT91C_US_MODE9            EQU (0x1:SHL:17) ;- (USART) 9-bit Character length
+AT91C_US_CKLO             EQU (0x1:SHL:18) ;- (USART) Clock Output Select
+AT91C_US_OVER             EQU (0x1:SHL:19) ;- (USART) Over Sampling Mode
+AT91C_US_INACK            EQU (0x1:SHL:20) ;- (USART) Inhibit Non Acknowledge
+AT91C_US_DSNACK           EQU (0x1:SHL:21) ;- (USART) Disable Successive NACK
+AT91C_US_MAX_ITER         EQU (0x1:SHL:24) ;- (USART) Number of Repetitions
+AT91C_US_FILTER           EQU (0x1:SHL:28) ;- (USART) Receive Line Filter
+;- -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
+AT91C_US_RXBRK            EQU (0x1:SHL:2) ;- (USART) Break Received/End of Break
+AT91C_US_TIMEOUT          EQU (0x1:SHL:8) ;- (USART) Receiver Time-out
+AT91C_US_ITERATION        EQU (0x1:SHL:10) ;- (USART) Max number of Repetitions Reached
+AT91C_US_NACK             EQU (0x1:SHL:13) ;- (USART) Non Acknowledge
+AT91C_US_RIIC             EQU (0x1:SHL:16) ;- (USART) Ring INdicator Input Change Flag
+AT91C_US_DSRIC            EQU (0x1:SHL:17) ;- (USART) Data Set Ready Input Change Flag
+AT91C_US_DCDIC            EQU (0x1:SHL:18) ;- (USART) Data Carrier Flag
+AT91C_US_CTSIC            EQU (0x1:SHL:19) ;- (USART) Clear To Send Input Change Flag
+;- -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
+;- -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- 
+;- -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- 
+AT91C_US_RI               EQU (0x1:SHL:20) ;- (USART) Image of RI Input
+AT91C_US_DSR              EQU (0x1:SHL:21) ;- (USART) Image of DSR Input
+AT91C_US_DCD              EQU (0x1:SHL:22) ;- (USART) Image of DCD Input
+AT91C_US_CTS              EQU (0x1:SHL:23) ;- (USART) Image of CTS Input
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Synchronous Serial Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_SSC
+SSC_CR          #  4 ;- Control Register
+SSC_CMR         #  4 ;- Clock Mode Register
+                #  8 ;- Reserved
+SSC_RCMR        #  4 ;- Receive Clock ModeRegister
+SSC_RFMR        #  4 ;- Receive Frame Mode Register
+SSC_TCMR        #  4 ;- Transmit Clock Mode Register
+SSC_TFMR        #  4 ;- Transmit Frame Mode Register
+SSC_RHR         #  4 ;- Receive Holding Register
+SSC_THR         #  4 ;- Transmit Holding Register
+                #  8 ;- Reserved
+SSC_RSHR        #  4 ;- Receive Sync Holding Register
+SSC_TSHR        #  4 ;- Transmit Sync Holding Register
+                #  8 ;- Reserved
+SSC_SR          #  4 ;- Status Register
+SSC_IER         #  4 ;- Interrupt Enable Register
+SSC_IDR         #  4 ;- Interrupt Disable Register
+SSC_IMR         #  4 ;- Interrupt Mask Register
+                # 176 ;- Reserved
+SSC_RPR         #  4 ;- Receive Pointer Register
+SSC_RCR         #  4 ;- Receive Counter Register
+SSC_TPR         #  4 ;- Transmit Pointer Register
+SSC_TCR         #  4 ;- Transmit Counter Register
+SSC_RNPR        #  4 ;- Receive Next Pointer Register
+SSC_RNCR        #  4 ;- Receive Next Counter Register
+SSC_TNPR        #  4 ;- Transmit Next Pointer Register
+SSC_TNCR        #  4 ;- Transmit Next Counter Register
+SSC_PTCR        #  4 ;- PDC Transfer Control Register
+SSC_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- 
+AT91C_SSC_RXEN            EQU (0x1:SHL:0) ;- (SSC) Receive Enable
+AT91C_SSC_RXDIS           EQU (0x1:SHL:1) ;- (SSC) Receive Disable
+AT91C_SSC_TXEN            EQU (0x1:SHL:8) ;- (SSC) Transmit Enable
+AT91C_SSC_TXDIS           EQU (0x1:SHL:9) ;- (SSC) Transmit Disable
+AT91C_SSC_SWRST           EQU (0x1:SHL:15) ;- (SSC) Software Reset
+;- -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- 
+AT91C_SSC_CKS             EQU (0x3:SHL:0) ;- (SSC) Receive/Transmit Clock Selection
+AT91C_SSC_CKS_DIV         EQU (0x0) ;- (SSC) Divided Clock
+AT91C_SSC_CKS_TK          EQU (0x1) ;- (SSC) TK Clock signal
+AT91C_SSC_CKS_RK          EQU (0x2) ;- (SSC) RK pin
+AT91C_SSC_CKO             EQU (0x7:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode Selection
+AT91C_SSC_CKO_NONE        EQU (0x0:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
+AT91C_SSC_CKO_CONTINOUS   EQU (0x1:SHL:2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output
+AT91C_SSC_CKO_DATA_TX     EQU (0x2:SHL:2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
+AT91C_SSC_CKI             EQU (0x1:SHL:5) ;- (SSC) Receive/Transmit Clock Inversion
+AT91C_SSC_CKG             EQU (0x3:SHL:6) ;- (SSC) Receive/Transmit Clock Gating Selection
+AT91C_SSC_CKG_NONE        EQU (0x0:SHL:6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock
+AT91C_SSC_CKG_LOW         EQU (0x1:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low
+AT91C_SSC_CKG_HIGH        EQU (0x2:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF High
+AT91C_SSC_START           EQU (0xF:SHL:8) ;- (SSC) Receive/Transmit Start Selection
+AT91C_SSC_START_CONTINOUS EQU (0x0:SHL:8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
+AT91C_SSC_START_TX        EQU (0x1:SHL:8) ;- (SSC) Transmit/Receive start
+AT91C_SSC_START_LOW_RF    EQU (0x2:SHL:8) ;- (SSC) Detection of a low level on RF input
+AT91C_SSC_START_HIGH_RF   EQU (0x3:SHL:8) ;- (SSC) Detection of a high level on RF input
+AT91C_SSC_START_FALL_RF   EQU (0x4:SHL:8) ;- (SSC) Detection of a falling edge on RF input
+AT91C_SSC_START_RISE_RF   EQU (0x5:SHL:8) ;- (SSC) Detection of a rising edge on RF input
+AT91C_SSC_START_LEVEL_RF  EQU (0x6:SHL:8) ;- (SSC) Detection of any level change on RF input
+AT91C_SSC_START_EDGE_RF   EQU (0x7:SHL:8) ;- (SSC) Detection of any edge on RF input
+AT91C_SSC_START_0         EQU (0x8:SHL:8) ;- (SSC) Compare 0
+AT91C_SSC_STOP            EQU (0x1:SHL:12) ;- (SSC) Receive Stop Selection
+AT91C_SSC_STTDLY          EQU (0xFF:SHL:16) ;- (SSC) Receive/Transmit Start Delay
+AT91C_SSC_PERIOD          EQU (0xFF:SHL:24) ;- (SSC) Receive/Transmit Period Divider Selection
+;- -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- 
+AT91C_SSC_DATLEN          EQU (0x1F:SHL:0) ;- (SSC) Data Length
+AT91C_SSC_LOOP            EQU (0x1:SHL:5) ;- (SSC) Loop Mode
+AT91C_SSC_MSBF            EQU (0x1:SHL:7) ;- (SSC) Most Significant Bit First
+AT91C_SSC_DATNB           EQU (0xF:SHL:8) ;- (SSC) Data Number per Frame
+AT91C_SSC_FSLEN           EQU (0xF:SHL:16) ;- (SSC) Receive/Transmit Frame Sync length
+AT91C_SSC_FSOS            EQU (0x7:SHL:20) ;- (SSC) Receive/Transmit Frame Sync Output Selection
+AT91C_SSC_FSOS_NONE       EQU (0x0:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
+AT91C_SSC_FSOS_NEGATIVE   EQU (0x1:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
+AT91C_SSC_FSOS_POSITIVE   EQU (0x2:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
+AT91C_SSC_FSOS_LOW        EQU (0x3:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
+AT91C_SSC_FSOS_HIGH       EQU (0x4:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
+AT91C_SSC_FSOS_TOGGLE     EQU (0x5:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
+AT91C_SSC_FSEDGE          EQU (0x1:SHL:24) ;- (SSC) Frame Sync Edge Detection
+;- -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- 
+;- -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- 
+AT91C_SSC_DATDEF          EQU (0x1:SHL:5) ;- (SSC) Data Default Value
+AT91C_SSC_FSDEN           EQU (0x1:SHL:23) ;- (SSC) Frame Sync Data Enable
+;- -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- 
+AT91C_SSC_TXRDY           EQU (0x1:SHL:0) ;- (SSC) Transmit Ready
+AT91C_SSC_TXEMPTY         EQU (0x1:SHL:1) ;- (SSC) Transmit Empty
+AT91C_SSC_ENDTX           EQU (0x1:SHL:2) ;- (SSC) End Of Transmission
+AT91C_SSC_TXBUFE          EQU (0x1:SHL:3) ;- (SSC) Transmit Buffer Empty
+AT91C_SSC_RXRDY           EQU (0x1:SHL:4) ;- (SSC) Receive Ready
+AT91C_SSC_OVRUN           EQU (0x1:SHL:5) ;- (SSC) Receive Overrun
+AT91C_SSC_ENDRX           EQU (0x1:SHL:6) ;- (SSC) End of Reception
+AT91C_SSC_RXBUFF          EQU (0x1:SHL:7) ;- (SSC) Receive Buffer Full
+AT91C_SSC_CP0             EQU (0x1:SHL:8) ;- (SSC) Compare 0
+AT91C_SSC_CP1             EQU (0x1:SHL:9) ;- (SSC) Compare 1
+AT91C_SSC_TXSYN           EQU (0x1:SHL:10) ;- (SSC) Transmit Sync
+AT91C_SSC_RXSYN           EQU (0x1:SHL:11) ;- (SSC) Receive Sync
+AT91C_SSC_TXENA           EQU (0x1:SHL:16) ;- (SSC) Transmit Enable
+AT91C_SSC_RXENA           EQU (0x1:SHL:17) ;- (SSC) Receive Enable
+;- -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- 
+;- -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- 
+;- -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Two-wire Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TWI
+TWI_CR          #  4 ;- Control Register
+TWI_MMR         #  4 ;- Master Mode Register
+                #  4 ;- Reserved
+TWI_IADR        #  4 ;- Internal Address Register
+TWI_CWGR        #  4 ;- Clock Waveform Generator Register
+                # 12 ;- Reserved
+TWI_SR          #  4 ;- Status Register
+TWI_IER         #  4 ;- Interrupt Enable Register
+TWI_IDR         #  4 ;- Interrupt Disable Register
+TWI_IMR         #  4 ;- Interrupt Mask Register
+TWI_RHR         #  4 ;- Receive Holding Register
+TWI_THR         #  4 ;- Transmit Holding Register
+;- -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- 
+AT91C_TWI_START           EQU (0x1:SHL:0) ;- (TWI) Send a START Condition
+AT91C_TWI_STOP            EQU (0x1:SHL:1) ;- (TWI) Send a STOP Condition
+AT91C_TWI_MSEN            EQU (0x1:SHL:2) ;- (TWI) TWI Master Transfer Enabled
+AT91C_TWI_MSDIS           EQU (0x1:SHL:3) ;- (TWI) TWI Master Transfer Disabled
+AT91C_TWI_SWRST           EQU (0x1:SHL:7) ;- (TWI) Software Reset
+;- -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- 
+AT91C_TWI_IADRSZ          EQU (0x3:SHL:8) ;- (TWI) Internal Device Address Size
+AT91C_TWI_IADRSZ_NO       EQU (0x0:SHL:8) ;- (TWI) No internal device address
+AT91C_TWI_IADRSZ_1_BYTE   EQU (0x1:SHL:8) ;- (TWI) One-byte internal device address
+AT91C_TWI_IADRSZ_2_BYTE   EQU (0x2:SHL:8) ;- (TWI) Two-byte internal device address
+AT91C_TWI_IADRSZ_3_BYTE   EQU (0x3:SHL:8) ;- (TWI) Three-byte internal device address
+AT91C_TWI_MREAD           EQU (0x1:SHL:12) ;- (TWI) Master Read Direction
+AT91C_TWI_DADR            EQU (0x7F:SHL:16) ;- (TWI) Device Address
+;- -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- 
+AT91C_TWI_CLDIV           EQU (0xFF:SHL:0) ;- (TWI) Clock Low Divider
+AT91C_TWI_CHDIV           EQU (0xFF:SHL:8) ;- (TWI) Clock High Divider
+AT91C_TWI_CKDIV           EQU (0x7:SHL:16) ;- (TWI) Clock Divider
+;- -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- 
+AT91C_TWI_TXCOMP          EQU (0x1:SHL:0) ;- (TWI) Transmission Completed
+AT91C_TWI_RXRDY           EQU (0x1:SHL:1) ;- (TWI) Receive holding register ReaDY
+AT91C_TWI_TXRDY           EQU (0x1:SHL:2) ;- (TWI) Transmit holding register ReaDY
+AT91C_TWI_OVRE            EQU (0x1:SHL:6) ;- (TWI) Overrun Error
+AT91C_TWI_UNRE            EQU (0x1:SHL:7) ;- (TWI) Underrun Error
+AT91C_TWI_NACK            EQU (0x1:SHL:8) ;- (TWI) Not Acknowledged
+;- -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- 
+;- -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- 
+;- -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR PWMC Channel Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PWMC_CH
+PWMC_CMR        #  4 ;- Channel Mode Register
+PWMC_CDTYR      #  4 ;- Channel Duty Cycle Register
+PWMC_CPRDR      #  4 ;- Channel Period Register
+PWMC_CCNTR      #  4 ;- Channel Counter Register
+PWMC_CUPDR      #  4 ;- Channel Update Register
+PWMC_Reserved   # 12 ;- Reserved
+;- -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- 
+AT91C_PWMC_CPRE           EQU (0xF:SHL:0) ;- (PWMC_CH) Channel Pre-scaler : PWMC_CLKx
+AT91C_PWMC_CPRE_MCK       EQU (0x0) ;- (PWMC_CH) 
+AT91C_PWMC_CPRE_MCKA      EQU (0xB) ;- (PWMC_CH) 
+AT91C_PWMC_CPRE_MCKB      EQU (0xC) ;- (PWMC_CH) 
+AT91C_PWMC_CALG           EQU (0x1:SHL:8) ;- (PWMC_CH) Channel Alignment
+AT91C_PWMC_CPOL           EQU (0x1:SHL:9) ;- (PWMC_CH) Channel Polarity
+AT91C_PWMC_CPD            EQU (0x1:SHL:10) ;- (PWMC_CH) Channel Update Period
+;- -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- 
+AT91C_PWMC_CDTY           EQU (0x0:SHL:0) ;- (PWMC_CH) Channel Duty Cycle
+;- -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- 
+AT91C_PWMC_CPRD           EQU (0x0:SHL:0) ;- (PWMC_CH) Channel Period
+;- -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- 
+AT91C_PWMC_CCNT           EQU (0x0:SHL:0) ;- (PWMC_CH) Channel Counter
+;- -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- 
+AT91C_PWMC_CUPD           EQU (0x0:SHL:0) ;- (PWMC_CH) Channel Update
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Pulse Width Modulation Controller Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_PWMC
+PWMC_MR         #  4 ;- PWMC Mode Register
+PWMC_ENA        #  4 ;- PWMC Enable Register
+PWMC_DIS        #  4 ;- PWMC Disable Register
+PWMC_SR         #  4 ;- PWMC Status Register
+PWMC_IER        #  4 ;- PWMC Interrupt Enable Register
+PWMC_IDR        #  4 ;- PWMC Interrupt Disable Register
+PWMC_IMR        #  4 ;- PWMC Interrupt Mask Register
+PWMC_ISR        #  4 ;- PWMC Interrupt Status Register
+                # 220 ;- Reserved
+PWMC_VR         #  4 ;- PWMC Version Register
+                # 256 ;- Reserved
+PWMC_CH         # 96 ;- PWMC Channel
+;- -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- 
+AT91C_PWMC_DIVA           EQU (0xFF:SHL:0) ;- (PWMC) CLKA divide factor.
+AT91C_PWMC_PREA           EQU (0xF:SHL:8) ;- (PWMC) Divider Input Clock Prescaler A
+AT91C_PWMC_PREA_MCK       EQU (0x0:SHL:8) ;- (PWMC) 
+AT91C_PWMC_DIVB           EQU (0xFF:SHL:16) ;- (PWMC) CLKB divide factor.
+AT91C_PWMC_PREB           EQU (0xF:SHL:24) ;- (PWMC) Divider Input Clock Prescaler B
+AT91C_PWMC_PREB_MCK       EQU (0x0:SHL:24) ;- (PWMC) 
+;- -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- 
+AT91C_PWMC_CHID0          EQU (0x1:SHL:0) ;- (PWMC) Channel ID 0
+AT91C_PWMC_CHID1          EQU (0x1:SHL:1) ;- (PWMC) Channel ID 1
+AT91C_PWMC_CHID2          EQU (0x1:SHL:2) ;- (PWMC) Channel ID 2
+AT91C_PWMC_CHID3          EQU (0x1:SHL:3) ;- (PWMC) Channel ID 3
+;- -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- 
+;- -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- 
+;- -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- 
+;- -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- 
+;- -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- 
+;- -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR USB Device Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_UDP
+UDP_NUM         #  4 ;- Frame Number Register
+UDP_GLBSTATE    #  4 ;- Global State Register
+UDP_FADDR       #  4 ;- Function Address Register
+                #  4 ;- Reserved
+UDP_IER         #  4 ;- Interrupt Enable Register
+UDP_IDR         #  4 ;- Interrupt Disable Register
+UDP_IMR         #  4 ;- Interrupt Mask Register
+UDP_ISR         #  4 ;- Interrupt Status Register
+UDP_ICR         #  4 ;- Interrupt Clear Register
+                #  4 ;- Reserved
+UDP_RSTEP       #  4 ;- Reset Endpoint Register
+                #  4 ;- Reserved
+UDP_CSR         # 24 ;- Endpoint Control and Status Register
+                #  8 ;- Reserved
+UDP_FDR         # 24 ;- Endpoint FIFO Data Register
+                # 12 ;- Reserved
+UDP_TXVC        #  4 ;- Transceiver Control Register
+;- -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- 
+AT91C_UDP_FRM_NUM         EQU (0x7FF:SHL:0) ;- (UDP) Frame Number as Defined in the Packet Field Formats
+AT91C_UDP_FRM_ERR         EQU (0x1:SHL:16) ;- (UDP) Frame Error
+AT91C_UDP_FRM_OK          EQU (0x1:SHL:17) ;- (UDP) Frame OK
+;- -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- 
+AT91C_UDP_FADDEN          EQU (0x1:SHL:0) ;- (UDP) Function Address Enable
+AT91C_UDP_CONFG           EQU (0x1:SHL:1) ;- (UDP) Configured
+AT91C_UDP_ESR             EQU (0x1:SHL:2) ;- (UDP) Enable Send Resume
+AT91C_UDP_RSMINPR         EQU (0x1:SHL:3) ;- (UDP) A Resume Has Been Sent to the Host
+AT91C_UDP_RMWUPE          EQU (0x1:SHL:4) ;- (UDP) Remote Wake Up Enable
+;- -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- 
+AT91C_UDP_FADD            EQU (0xFF:SHL:0) ;- (UDP) Function Address Value
+AT91C_UDP_FEN             EQU (0x1:SHL:8) ;- (UDP) Function Enable
+;- -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- 
+AT91C_UDP_EPINT0          EQU (0x1:SHL:0) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT1          EQU (0x1:SHL:1) ;- (UDP) Endpoint 0 Interrupt
+AT91C_UDP_EPINT2          EQU (0x1:SHL:2) ;- (UDP) Endpoint 2 Interrupt
+AT91C_UDP_EPINT3          EQU (0x1:SHL:3) ;- (UDP) Endpoint 3 Interrupt
+AT91C_UDP_EPINT4          EQU (0x1:SHL:4) ;- (UDP) Endpoint 4 Interrupt
+AT91C_UDP_EPINT5          EQU (0x1:SHL:5) ;- (UDP) Endpoint 5 Interrupt
+AT91C_UDP_RXSUSP          EQU (0x1:SHL:8) ;- (UDP) USB Suspend Interrupt
+AT91C_UDP_RXRSM           EQU (0x1:SHL:9) ;- (UDP) USB Resume Interrupt
+AT91C_UDP_EXTRSM          EQU (0x1:SHL:10) ;- (UDP) USB External Resume Interrupt
+AT91C_UDP_SOFINT          EQU (0x1:SHL:11) ;- (UDP) USB Start Of frame Interrupt
+AT91C_UDP_WAKEUP          EQU (0x1:SHL:13) ;- (UDP) USB Resume Interrupt
+;- -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- 
+;- -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- 
+;- -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- 
+AT91C_UDP_ENDBUSRES       EQU (0x1:SHL:12) ;- (UDP) USB End Of Bus Reset Interrupt
+;- -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- 
+;- -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- 
+AT91C_UDP_EP0             EQU (0x1:SHL:0) ;- (UDP) Reset Endpoint 0
+AT91C_UDP_EP1             EQU (0x1:SHL:1) ;- (UDP) Reset Endpoint 1
+AT91C_UDP_EP2             EQU (0x1:SHL:2) ;- (UDP) Reset Endpoint 2
+AT91C_UDP_EP3             EQU (0x1:SHL:3) ;- (UDP) Reset Endpoint 3
+AT91C_UDP_EP4             EQU (0x1:SHL:4) ;- (UDP) Reset Endpoint 4
+AT91C_UDP_EP5             EQU (0x1:SHL:5) ;- (UDP) Reset Endpoint 5
+;- -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- 
+AT91C_UDP_TXCOMP          EQU (0x1:SHL:0) ;- (UDP) Generates an IN packet with data previously written in the DPR
+AT91C_UDP_RX_DATA_BK0     EQU (0x1:SHL:1) ;- (UDP) Receive Data Bank 0
+AT91C_UDP_RXSETUP         EQU (0x1:SHL:2) ;- (UDP) Sends STALL to the Host (Control endpoints)
+AT91C_UDP_ISOERROR        EQU (0x1:SHL:3) ;- (UDP) Isochronous error (Isochronous endpoints)
+AT91C_UDP_TXPKTRDY        EQU (0x1:SHL:4) ;- (UDP) Transmit Packet Ready
+AT91C_UDP_FORCESTALL      EQU (0x1:SHL:5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints).
+AT91C_UDP_RX_DATA_BK1     EQU (0x1:SHL:6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes).
+AT91C_UDP_DIR             EQU (0x1:SHL:7) ;- (UDP) Transfer Direction
+AT91C_UDP_EPTYPE          EQU (0x7:SHL:8) ;- (UDP) Endpoint type
+AT91C_UDP_EPTYPE_CTRL     EQU (0x0:SHL:8) ;- (UDP) Control
+AT91C_UDP_EPTYPE_ISO_OUT  EQU (0x1:SHL:8) ;- (UDP) Isochronous OUT
+AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2:SHL:8) ;- (UDP) Bulk OUT
+AT91C_UDP_EPTYPE_INT_OUT  EQU (0x3:SHL:8) ;- (UDP) Interrupt OUT
+AT91C_UDP_EPTYPE_ISO_IN   EQU (0x5:SHL:8) ;- (UDP) Isochronous IN
+AT91C_UDP_EPTYPE_BULK_IN  EQU (0x6:SHL:8) ;- (UDP) Bulk IN
+AT91C_UDP_EPTYPE_INT_IN   EQU (0x7:SHL:8) ;- (UDP) Interrupt IN
+AT91C_UDP_DTGLE           EQU (0x1:SHL:11) ;- (UDP) Data Toggle
+AT91C_UDP_EPEDS           EQU (0x1:SHL:15) ;- (UDP) Endpoint Enable Disable
+AT91C_UDP_RXBYTECNT       EQU (0x7FF:SHL:16) ;- (UDP) Number Of Bytes Available in the FIFO
+;- -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register -------- 
+AT91C_UDP_TXVDIS          EQU (0x1:SHL:8) ;- (UDP) 
+AT91C_UDP_PUON            EQU (0x1:SHL:9) ;- (UDP) Pull-up ON
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TC
+TC_CCR          #  4 ;- Channel Control Register
+TC_CMR          #  4 ;- Channel Mode Register (Capture Mode / Waveform Mode)
+                #  8 ;- Reserved
+TC_CV           #  4 ;- Counter Value
+TC_RA           #  4 ;- Register A
+TC_RB           #  4 ;- Register B
+TC_RC           #  4 ;- Register C
+TC_SR           #  4 ;- Status Register
+TC_IER          #  4 ;- Interrupt Enable Register
+TC_IDR          #  4 ;- Interrupt Disable Register
+TC_IMR          #  4 ;- Interrupt Mask Register
+;- -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- 
+AT91C_TC_CLKEN            EQU (0x1:SHL:0) ;- (TC) Counter Clock Enable Command
+AT91C_TC_CLKDIS           EQU (0x1:SHL:1) ;- (TC) Counter Clock Disable Command
+AT91C_TC_SWTRG            EQU (0x1:SHL:2) ;- (TC) Software Trigger Command
+;- -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- 
+AT91C_TC_CLKS             EQU (0x7:SHL:0) ;- (TC) Clock Selection
+AT91C_TC_CLKS_TIMER_DIV1_CLOCK EQU (0x0) ;- (TC) Clock selected: TIMER_DIV1_CLOCK
+AT91C_TC_CLKS_TIMER_DIV2_CLOCK EQU (0x1) ;- (TC) Clock selected: TIMER_DIV2_CLOCK
+AT91C_TC_CLKS_TIMER_DIV3_CLOCK EQU (0x2) ;- (TC) Clock selected: TIMER_DIV3_CLOCK
+AT91C_TC_CLKS_TIMER_DIV4_CLOCK EQU (0x3) ;- (TC) Clock selected: TIMER_DIV4_CLOCK
+AT91C_TC_CLKS_TIMER_DIV5_CLOCK EQU (0x4) ;- (TC) Clock selected: TIMER_DIV5_CLOCK
+AT91C_TC_CLKS_XC0         EQU (0x5) ;- (TC) Clock selected: XC0
+AT91C_TC_CLKS_XC1         EQU (0x6) ;- (TC) Clock selected: XC1
+AT91C_TC_CLKS_XC2         EQU (0x7) ;- (TC) Clock selected: XC2
+AT91C_TC_CLKI             EQU (0x1:SHL:3) ;- (TC) Clock Invert
+AT91C_TC_BURST            EQU (0x3:SHL:4) ;- (TC) Burst Signal Selection
+AT91C_TC_BURST_NONE       EQU (0x0:SHL:4) ;- (TC) The clock is not gated by an external signal
+AT91C_TC_BURST_XC0        EQU (0x1:SHL:4) ;- (TC) XC0 is ANDed with the selected clock
+AT91C_TC_BURST_XC1        EQU (0x2:SHL:4) ;- (TC) XC1 is ANDed with the selected clock
+AT91C_TC_BURST_XC2        EQU (0x3:SHL:4) ;- (TC) XC2 is ANDed with the selected clock
+AT91C_TC_CPCSTOP          EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RC Compare
+AT91C_TC_LDBSTOP          EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RB Loading
+AT91C_TC_CPCDIS           EQU (0x1:SHL:7) ;- (TC) Counter Clock Disable with RC Compare
+AT91C_TC_LDBDIS           EQU (0x1:SHL:7) ;- (TC) Counter Clock Disabled with RB Loading
+AT91C_TC_ETRGEDG          EQU (0x3:SHL:8) ;- (TC) External Trigger Edge Selection
+AT91C_TC_ETRGEDG_NONE     EQU (0x0:SHL:8) ;- (TC) Edge: None
+AT91C_TC_ETRGEDG_RISING   EQU (0x1:SHL:8) ;- (TC) Edge: rising edge
+AT91C_TC_ETRGEDG_FALLING  EQU (0x2:SHL:8) ;- (TC) Edge: falling edge
+AT91C_TC_ETRGEDG_BOTH     EQU (0x3:SHL:8) ;- (TC) Edge: each edge
+AT91C_TC_EEVTEDG          EQU (0x3:SHL:8) ;- (TC) External Event Edge Selection
+AT91C_TC_EEVTEDG_NONE     EQU (0x0:SHL:8) ;- (TC) Edge: None
+AT91C_TC_EEVTEDG_RISING   EQU (0x1:SHL:8) ;- (TC) Edge: rising edge
+AT91C_TC_EEVTEDG_FALLING  EQU (0x2:SHL:8) ;- (TC) Edge: falling edge
+AT91C_TC_EEVTEDG_BOTH     EQU (0x3:SHL:8) ;- (TC) Edge: each edge
+AT91C_TC_EEVT             EQU (0x3:SHL:10) ;- (TC) External Event  Selection
+AT91C_TC_EEVT_TIOB        EQU (0x0:SHL:10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input
+AT91C_TC_EEVT_XC0         EQU (0x1:SHL:10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output
+AT91C_TC_EEVT_XC1         EQU (0x2:SHL:10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output
+AT91C_TC_EEVT_XC2         EQU (0x3:SHL:10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output
+AT91C_TC_ABETRG           EQU (0x1:SHL:10) ;- (TC) TIOA or TIOB External Trigger Selection
+AT91C_TC_ENETRG           EQU (0x1:SHL:12) ;- (TC) External Event Trigger enable
+AT91C_TC_WAVESEL          EQU (0x3:SHL:13) ;- (TC) Waveform  Selection
+AT91C_TC_WAVESEL_UP       EQU (0x0:SHL:13) ;- (TC) UP mode without atomatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN   EQU (0x1:SHL:13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UP_AUTO  EQU (0x2:SHL:13) ;- (TC) UP mode with automatic trigger on RC Compare
+AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3:SHL:13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare
+AT91C_TC_CPCTRG           EQU (0x1:SHL:14) ;- (TC) RC Compare Trigger Enable
+AT91C_TC_WAVE             EQU (0x1:SHL:15) ;- (TC) 
+AT91C_TC_ACPA             EQU (0x3:SHL:16) ;- (TC) RA Compare Effect on TIOA
+AT91C_TC_ACPA_NONE        EQU (0x0:SHL:16) ;- (TC) Effect: none
+AT91C_TC_ACPA_SET         EQU (0x1:SHL:16) ;- (TC) Effect: set
+AT91C_TC_ACPA_CLEAR       EQU (0x2:SHL:16) ;- (TC) Effect: clear
+AT91C_TC_ACPA_TOGGLE      EQU (0x3:SHL:16) ;- (TC) Effect: toggle
+AT91C_TC_LDRA             EQU (0x3:SHL:16) ;- (TC) RA Loading Selection
+AT91C_TC_LDRA_NONE        EQU (0x0:SHL:16) ;- (TC) Edge: None
+AT91C_TC_LDRA_RISING      EQU (0x1:SHL:16) ;- (TC) Edge: rising edge of TIOA
+AT91C_TC_LDRA_FALLING     EQU (0x2:SHL:16) ;- (TC) Edge: falling edge of TIOA
+AT91C_TC_LDRA_BOTH        EQU (0x3:SHL:16) ;- (TC) Edge: each edge of TIOA
+AT91C_TC_ACPC             EQU (0x3:SHL:18) ;- (TC) RC Compare Effect on TIOA
+AT91C_TC_ACPC_NONE        EQU (0x0:SHL:18) ;- (TC) Effect: none
+AT91C_TC_ACPC_SET         EQU (0x1:SHL:18) ;- (TC) Effect: set
+AT91C_TC_ACPC_CLEAR       EQU (0x2:SHL:18) ;- (TC) Effect: clear
+AT91C_TC_ACPC_TOGGLE      EQU (0x3:SHL:18) ;- (TC) Effect: toggle
+AT91C_TC_LDRB             EQU (0x3:SHL:18) ;- (TC) RB Loading Selection
+AT91C_TC_LDRB_NONE        EQU (0x0:SHL:18) ;- (TC) Edge: None
+AT91C_TC_LDRB_RISING      EQU (0x1:SHL:18) ;- (TC) Edge: rising edge of TIOA
+AT91C_TC_LDRB_FALLING     EQU (0x2:SHL:18) ;- (TC) Edge: falling edge of TIOA
+AT91C_TC_LDRB_BOTH        EQU (0x3:SHL:18) ;- (TC) Edge: each edge of TIOA
+AT91C_TC_AEEVT            EQU (0x3:SHL:20) ;- (TC) External Event Effect on TIOA
+AT91C_TC_AEEVT_NONE       EQU (0x0:SHL:20) ;- (TC) Effect: none
+AT91C_TC_AEEVT_SET        EQU (0x1:SHL:20) ;- (TC) Effect: set
+AT91C_TC_AEEVT_CLEAR      EQU (0x2:SHL:20) ;- (TC) Effect: clear
+AT91C_TC_AEEVT_TOGGLE     EQU (0x3:SHL:20) ;- (TC) Effect: toggle
+AT91C_TC_ASWTRG           EQU (0x3:SHL:22) ;- (TC) Software Trigger Effect on TIOA
+AT91C_TC_ASWTRG_NONE      EQU (0x0:SHL:22) ;- (TC) Effect: none
+AT91C_TC_ASWTRG_SET       EQU (0x1:SHL:22) ;- (TC) Effect: set
+AT91C_TC_ASWTRG_CLEAR     EQU (0x2:SHL:22) ;- (TC) Effect: clear
+AT91C_TC_ASWTRG_TOGGLE    EQU (0x3:SHL:22) ;- (TC) Effect: toggle
+AT91C_TC_BCPB             EQU (0x3:SHL:24) ;- (TC) RB Compare Effect on TIOB
+AT91C_TC_BCPB_NONE        EQU (0x0:SHL:24) ;- (TC) Effect: none
+AT91C_TC_BCPB_SET         EQU (0x1:SHL:24) ;- (TC) Effect: set
+AT91C_TC_BCPB_CLEAR       EQU (0x2:SHL:24) ;- (TC) Effect: clear
+AT91C_TC_BCPB_TOGGLE      EQU (0x3:SHL:24) ;- (TC) Effect: toggle
+AT91C_TC_BCPC             EQU (0x3:SHL:26) ;- (TC) RC Compare Effect on TIOB
+AT91C_TC_BCPC_NONE        EQU (0x0:SHL:26) ;- (TC) Effect: none
+AT91C_TC_BCPC_SET         EQU (0x1:SHL:26) ;- (TC) Effect: set
+AT91C_TC_BCPC_CLEAR       EQU (0x2:SHL:26) ;- (TC) Effect: clear
+AT91C_TC_BCPC_TOGGLE      EQU (0x3:SHL:26) ;- (TC) Effect: toggle
+AT91C_TC_BEEVT            EQU (0x3:SHL:28) ;- (TC) External Event Effect on TIOB
+AT91C_TC_BEEVT_NONE       EQU (0x0:SHL:28) ;- (TC) Effect: none
+AT91C_TC_BEEVT_SET        EQU (0x1:SHL:28) ;- (TC) Effect: set
+AT91C_TC_BEEVT_CLEAR      EQU (0x2:SHL:28) ;- (TC) Effect: clear
+AT91C_TC_BEEVT_TOGGLE     EQU (0x3:SHL:28) ;- (TC) Effect: toggle
+AT91C_TC_BSWTRG           EQU (0x3:SHL:30) ;- (TC) Software Trigger Effect on TIOB
+AT91C_TC_BSWTRG_NONE      EQU (0x0:SHL:30) ;- (TC) Effect: none
+AT91C_TC_BSWTRG_SET       EQU (0x1:SHL:30) ;- (TC) Effect: set
+AT91C_TC_BSWTRG_CLEAR     EQU (0x2:SHL:30) ;- (TC) Effect: clear
+AT91C_TC_BSWTRG_TOGGLE    EQU (0x3:SHL:30) ;- (TC) Effect: toggle
+;- -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- 
+AT91C_TC_COVFS            EQU (0x1:SHL:0) ;- (TC) Counter Overflow
+AT91C_TC_LOVRS            EQU (0x1:SHL:1) ;- (TC) Load Overrun
+AT91C_TC_CPAS             EQU (0x1:SHL:2) ;- (TC) RA Compare
+AT91C_TC_CPBS             EQU (0x1:SHL:3) ;- (TC) RB Compare
+AT91C_TC_CPCS             EQU (0x1:SHL:4) ;- (TC) RC Compare
+AT91C_TC_LDRAS            EQU (0x1:SHL:5) ;- (TC) RA Loading
+AT91C_TC_LDRBS            EQU (0x1:SHL:6) ;- (TC) RB Loading
+AT91C_TC_ETRGS            EQU (0x1:SHL:7) ;- (TC) External Trigger
+AT91C_TC_CLKSTA           EQU (0x1:SHL:16) ;- (TC) Clock Enabling
+AT91C_TC_MTIOA            EQU (0x1:SHL:17) ;- (TC) TIOA Mirror
+AT91C_TC_MTIOB            EQU (0x1:SHL:18) ;- (TC) TIOA Mirror
+;- -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- 
+;- -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- 
+;- -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Timer Counter Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_TCB
+TCB_TC0         # 48 ;- TC Channel 0
+                # 16 ;- Reserved
+TCB_TC1         # 48 ;- TC Channel 1
+                # 16 ;- Reserved
+TCB_TC2         # 48 ;- TC Channel 2
+                # 16 ;- Reserved
+TCB_BCR         #  4 ;- TC Block Control Register
+TCB_BMR         #  4 ;- TC Block Mode Register
+;- -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- 
+AT91C_TCB_SYNC            EQU (0x1:SHL:0) ;- (TCB) Synchro Command
+;- -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- 
+AT91C_TCB_TC0XC0S         EQU (0x3:SHL:0) ;- (TCB) External Clock Signal 0 Selection
+AT91C_TCB_TC0XC0S_TCLK0   EQU (0x0) ;- (TCB) TCLK0 connected to XC0
+AT91C_TCB_TC0XC0S_NONE    EQU (0x1) ;- (TCB) None signal connected to XC0
+AT91C_TCB_TC0XC0S_TIOA1   EQU (0x2) ;- (TCB) TIOA1 connected to XC0
+AT91C_TCB_TC0XC0S_TIOA2   EQU (0x3) ;- (TCB) TIOA2 connected to XC0
+AT91C_TCB_TC1XC1S         EQU (0x3:SHL:2) ;- (TCB) External Clock Signal 1 Selection
+AT91C_TCB_TC1XC1S_TCLK1   EQU (0x0:SHL:2) ;- (TCB) TCLK1 connected to XC1
+AT91C_TCB_TC1XC1S_NONE    EQU (0x1:SHL:2) ;- (TCB) None signal connected to XC1
+AT91C_TCB_TC1XC1S_TIOA0   EQU (0x2:SHL:2) ;- (TCB) TIOA0 connected to XC1
+AT91C_TCB_TC1XC1S_TIOA2   EQU (0x3:SHL:2) ;- (TCB) TIOA2 connected to XC1
+AT91C_TCB_TC2XC2S         EQU (0x3:SHL:4) ;- (TCB) External Clock Signal 2 Selection
+AT91C_TCB_TC2XC2S_TCLK2   EQU (0x0:SHL:4) ;- (TCB) TCLK2 connected to XC2
+AT91C_TCB_TC2XC2S_NONE    EQU (0x1:SHL:4) ;- (TCB) None signal connected to XC2
+AT91C_TCB_TC2XC2S_TIOA0   EQU (0x2:SHL:4) ;- (TCB) TIOA0 connected to XC2
+AT91C_TCB_TC2XC2S_TIOA1   EQU (0x3:SHL:4) ;- (TCB) TIOA2 connected to XC2
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Control Area Network MailBox Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_CAN_MB
+CAN_MB_MMR      #  4 ;- MailBox Mode Register
+CAN_MB_MAM      #  4 ;- MailBox Acceptance Mask Register
+CAN_MB_MID      #  4 ;- MailBox ID Register
+CAN_MB_MFID     #  4 ;- MailBox Family ID Register
+CAN_MB_MSR      #  4 ;- MailBox Status Register
+CAN_MB_MDL      #  4 ;- MailBox Data Low Register
+CAN_MB_MDH      #  4 ;- MailBox Data High Register
+CAN_MB_MCR      #  4 ;- MailBox Control Register
+;- -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register -------- 
+AT91C_CAN_MTIMEMARK       EQU (0xFFFF:SHL:0) ;- (CAN_MB) Mailbox Timemark
+AT91C_CAN_PRIOR           EQU (0xF:SHL:16) ;- (CAN_MB) Mailbox Priority
+AT91C_CAN_MOT             EQU (0x7:SHL:24) ;- (CAN_MB) Mailbox Object Type
+AT91C_CAN_MOT_DIS         EQU (0x0:SHL:24) ;- (CAN_MB) 
+AT91C_CAN_MOT_RX          EQU (0x1:SHL:24) ;- (CAN_MB) 
+AT91C_CAN_MOT_RXOVERWRITE EQU (0x2:SHL:24) ;- (CAN_MB) 
+AT91C_CAN_MOT_TX          EQU (0x3:SHL:24) ;- (CAN_MB) 
+AT91C_CAN_MOT_CONSUMER    EQU (0x4:SHL:24) ;- (CAN_MB) 
+AT91C_CAN_MOT_PRODUCER    EQU (0x5:SHL:24) ;- (CAN_MB) 
+;- -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register -------- 
+AT91C_CAN_MIDvB           EQU (0x3FFFF:SHL:0) ;- (CAN_MB) Complementary bits for identifier in extended mode
+AT91C_CAN_MIDvA           EQU (0x7FF:SHL:18) ;- (CAN_MB) Identifier for standard frame mode
+AT91C_CAN_MIDE            EQU (0x1:SHL:29) ;- (CAN_MB) Identifier Version
+;- -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register -------- 
+;- -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register -------- 
+;- -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register -------- 
+AT91C_CAN_MTIMESTAMP      EQU (0xFFFF:SHL:0) ;- (CAN_MB) Timer Value
+AT91C_CAN_MDLC            EQU (0xF:SHL:16) ;- (CAN_MB) Mailbox Data Length Code
+AT91C_CAN_MRTR            EQU (0x1:SHL:20) ;- (CAN_MB) Mailbox Remote Transmission Request
+AT91C_CAN_MABT            EQU (0x1:SHL:22) ;- (CAN_MB) Mailbox Message Abort
+AT91C_CAN_MRDY            EQU (0x1:SHL:23) ;- (CAN_MB) Mailbox Ready
+AT91C_CAN_MMI             EQU (0x1:SHL:24) ;- (CAN_MB) Mailbox Message Ignored
+;- -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register -------- 
+;- -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register -------- 
+;- -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register -------- 
+AT91C_CAN_MACR            EQU (0x1:SHL:22) ;- (CAN_MB) Abort Request for Mailbox
+AT91C_CAN_MTCR            EQU (0x1:SHL:23) ;- (CAN_MB) Mailbox Transfer Command
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Control Area Network Interface
+;- *****************************************************************************
+                ^ 0 ;- AT91S_CAN
+CAN_MR          #  4 ;- Mode Register
+CAN_IER         #  4 ;- Interrupt Enable Register
+CAN_IDR         #  4 ;- Interrupt Disable Register
+CAN_IMR         #  4 ;- Interrupt Mask Register
+CAN_SR          #  4 ;- Status Register
+CAN_BR          #  4 ;- Baudrate Register
+CAN_TIM         #  4 ;- Timer Register
+CAN_TIMESTP     #  4 ;- Time Stamp Register
+CAN_ECR         #  4 ;- Error Counter Register
+CAN_TCR         #  4 ;- Transfer Command Register
+CAN_ACR         #  4 ;- Abort Command Register
+                # 208 ;- Reserved
+CAN_VR          #  4 ;- Version Register
+                # 256 ;- Reserved
+CAN_MB0         # 32 ;- CAN Mailbox 0
+CAN_MB1         # 32 ;- CAN Mailbox 1
+CAN_MB2         # 32 ;- CAN Mailbox 2
+CAN_MB3         # 32 ;- CAN Mailbox 3
+CAN_MB4         # 32 ;- CAN Mailbox 4
+CAN_MB5         # 32 ;- CAN Mailbox 5
+CAN_MB6         # 32 ;- CAN Mailbox 6
+CAN_MB7         # 32 ;- CAN Mailbox 7
+CAN_MB8         # 32 ;- CAN Mailbox 8
+CAN_MB9         # 32 ;- CAN Mailbox 9
+CAN_MB10        # 32 ;- CAN Mailbox 10
+CAN_MB11        # 32 ;- CAN Mailbox 11
+CAN_MB12        # 32 ;- CAN Mailbox 12
+CAN_MB13        # 32 ;- CAN Mailbox 13
+CAN_MB14        # 32 ;- CAN Mailbox 14
+CAN_MB15        # 32 ;- CAN Mailbox 15
+;- -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register -------- 
+AT91C_CAN_CANEN           EQU (0x1:SHL:0) ;- (CAN) CAN Controller Enable
+AT91C_CAN_LPM             EQU (0x1:SHL:1) ;- (CAN) Disable/Enable Low Power Mode
+AT91C_CAN_ABM             EQU (0x1:SHL:2) ;- (CAN) Disable/Enable Autobaud/Listen Mode
+AT91C_CAN_OVL             EQU (0x1:SHL:3) ;- (CAN) Disable/Enable Overload Frame
+AT91C_CAN_TEOF            EQU (0x1:SHL:4) ;- (CAN) Time Stamp messages at each end of Frame
+AT91C_CAN_TTM             EQU (0x1:SHL:5) ;- (CAN) Disable/Enable Time Trigger Mode
+AT91C_CAN_TIMFRZ          EQU (0x1:SHL:6) ;- (CAN) Enable Timer Freeze
+AT91C_CAN_DRPT            EQU (0x1:SHL:7) ;- (CAN) Disable Repeat
+;- -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register -------- 
+AT91C_CAN_MB0             EQU (0x1:SHL:0) ;- (CAN) Mailbox 0 Flag
+AT91C_CAN_MB1             EQU (0x1:SHL:1) ;- (CAN) Mailbox 1 Flag
+AT91C_CAN_MB2             EQU (0x1:SHL:2) ;- (CAN) Mailbox 2 Flag
+AT91C_CAN_MB3             EQU (0x1:SHL:3) ;- (CAN) Mailbox 3 Flag
+AT91C_CAN_MB4             EQU (0x1:SHL:4) ;- (CAN) Mailbox 4 Flag
+AT91C_CAN_MB5             EQU (0x1:SHL:5) ;- (CAN) Mailbox 5 Flag
+AT91C_CAN_MB6             EQU (0x1:SHL:6) ;- (CAN) Mailbox 6 Flag
+AT91C_CAN_MB7             EQU (0x1:SHL:7) ;- (CAN) Mailbox 7 Flag
+AT91C_CAN_MB8             EQU (0x1:SHL:8) ;- (CAN) Mailbox 8 Flag
+AT91C_CAN_MB9             EQU (0x1:SHL:9) ;- (CAN) Mailbox 9 Flag
+AT91C_CAN_MB10            EQU (0x1:SHL:10) ;- (CAN) Mailbox 10 Flag
+AT91C_CAN_MB11            EQU (0x1:SHL:11) ;- (CAN) Mailbox 11 Flag
+AT91C_CAN_MB12            EQU (0x1:SHL:12) ;- (CAN) Mailbox 12 Flag
+AT91C_CAN_MB13            EQU (0x1:SHL:13) ;- (CAN) Mailbox 13 Flag
+AT91C_CAN_MB14            EQU (0x1:SHL:14) ;- (CAN) Mailbox 14 Flag
+AT91C_CAN_MB15            EQU (0x1:SHL:15) ;- (CAN) Mailbox 15 Flag
+AT91C_CAN_ERRA            EQU (0x1:SHL:16) ;- (CAN) Error Active Mode Flag
+AT91C_CAN_WARN            EQU (0x1:SHL:17) ;- (CAN) Warning Limit Flag
+AT91C_CAN_ERRP            EQU (0x1:SHL:18) ;- (CAN) Error Passive Mode Flag
+AT91C_CAN_BOFF            EQU (0x1:SHL:19) ;- (CAN) Bus Off Mode Flag
+AT91C_CAN_SLEEP           EQU (0x1:SHL:20) ;- (CAN) Sleep Flag
+AT91C_CAN_WAKEUP          EQU (0x1:SHL:21) ;- (CAN) Wakeup Flag
+AT91C_CAN_TOVF            EQU (0x1:SHL:22) ;- (CAN) Timer Overflow Flag
+AT91C_CAN_TSTP            EQU (0x1:SHL:23) ;- (CAN) Timestamp Flag
+AT91C_CAN_CERR            EQU (0x1:SHL:24) ;- (CAN) CRC Error
+AT91C_CAN_SERR            EQU (0x1:SHL:25) ;- (CAN) Stuffing Error
+AT91C_CAN_AERR            EQU (0x1:SHL:26) ;- (CAN) Acknowledgment Error
+AT91C_CAN_FERR            EQU (0x1:SHL:27) ;- (CAN) Form Error
+AT91C_CAN_BERR            EQU (0x1:SHL:28) ;- (CAN) Bit Error
+;- -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register -------- 
+;- -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register -------- 
+;- -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register -------- 
+AT91C_CAN_RBSY            EQU (0x1:SHL:29) ;- (CAN) Receiver Busy
+AT91C_CAN_TBSY            EQU (0x1:SHL:30) ;- (CAN) Transmitter Busy
+AT91C_CAN_OVLY            EQU (0x1:SHL:31) ;- (CAN) Overload Busy
+;- -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register -------- 
+AT91C_CAN_PHASE2          EQU (0x7:SHL:0) ;- (CAN) Phase 2 segment
+AT91C_CAN_PHASE1          EQU (0x7:SHL:4) ;- (CAN) Phase 1 segment
+AT91C_CAN_PROPAG          EQU (0x7:SHL:8) ;- (CAN) Programmation time segment
+AT91C_CAN_SYNC            EQU (0x3:SHL:12) ;- (CAN) Re-synchronization jump width segment
+AT91C_CAN_BRP             EQU (0x7F:SHL:16) ;- (CAN) Baudrate Prescaler
+AT91C_CAN_SMP             EQU (0x1:SHL:24) ;- (CAN) Sampling mode
+;- -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register -------- 
+AT91C_CAN_TIMER           EQU (0xFFFF:SHL:0) ;- (CAN) Timer field
+;- -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register -------- 
+;- -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register -------- 
+AT91C_CAN_REC             EQU (0xFF:SHL:0) ;- (CAN) Receive Error Counter
+AT91C_CAN_TEC             EQU (0xFF:SHL:16) ;- (CAN) Transmit Error Counter
+;- -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register -------- 
+AT91C_CAN_TIMRST          EQU (0x1:SHL:31) ;- (CAN) Timer Reset Field
+;- -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register -------- 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Ethernet MAC 10/100
+;- *****************************************************************************
+                ^ 0 ;- AT91S_EMAC
+EMAC_NCR        #  4 ;- Network Control Register
+EMAC_NCFGR      #  4 ;- Network Configuration Register
+EMAC_NSR        #  4 ;- Network Status Register
+                #  8 ;- Reserved
+EMAC_TSR        #  4 ;- Transmit Status Register
+EMAC_RBQP       #  4 ;- Receive Buffer Queue Pointer
+EMAC_TBQP       #  4 ;- Transmit Buffer Queue Pointer
+EMAC_RSR        #  4 ;- Receive Status Register
+EMAC_ISR        #  4 ;- Interrupt Status Register
+EMAC_IER        #  4 ;- Interrupt Enable Register
+EMAC_IDR        #  4 ;- Interrupt Disable Register
+EMAC_IMR        #  4 ;- Interrupt Mask Register
+EMAC_MAN        #  4 ;- PHY Maintenance Register
+EMAC_PTR        #  4 ;- Pause Time Register
+EMAC_PFR        #  4 ;- Pause Frames received Register
+EMAC_FTO        #  4 ;- Frames Transmitted OK Register
+EMAC_SCF        #  4 ;- Single Collision Frame Register
+EMAC_MCF        #  4 ;- Multiple Collision Frame Register
+EMAC_FRO        #  4 ;- Frames Received OK Register
+EMAC_FCSE       #  4 ;- Frame Check Sequence Error Register
+EMAC_ALE        #  4 ;- Alignment Error Register
+EMAC_DTF        #  4 ;- Deferred Transmission Frame Register
+EMAC_LCOL       #  4 ;- Late Collision Register
+EMAC_ECOL       #  4 ;- Excessive Collision Register
+EMAC_TUND       #  4 ;- Transmit Underrun Error Register
+EMAC_CSE        #  4 ;- Carrier Sense Error Register
+EMAC_RRE        #  4 ;- Receive Ressource Error Register
+EMAC_ROV        #  4 ;- Receive Overrun Errors Register
+EMAC_RSE        #  4 ;- Receive Symbol Errors Register
+EMAC_ELE        #  4 ;- Excessive Length Errors Register
+EMAC_RJA        #  4 ;- Receive Jabbers Register
+EMAC_USF        #  4 ;- Undersize Frames Register
+EMAC_STE        #  4 ;- SQE Test Error Register
+EMAC_RLE        #  4 ;- Receive Length Field Mismatch Register
+EMAC_TPF        #  4 ;- Transmitted Pause Frames Register
+EMAC_HRB        #  4 ;- Hash Address Bottom[31:0]
+EMAC_HRT        #  4 ;- Hash Address Top[63:32]
+EMAC_SA1L       #  4 ;- Specific Address 1 Bottom, First 4 bytes
+EMAC_SA1H       #  4 ;- Specific Address 1 Top, Last 2 bytes
+EMAC_SA2L       #  4 ;- Specific Address 2 Bottom, First 4 bytes
+EMAC_SA2H       #  4 ;- Specific Address 2 Top, Last 2 bytes
+EMAC_SA3L       #  4 ;- Specific Address 3 Bottom, First 4 bytes
+EMAC_SA3H       #  4 ;- Specific Address 3 Top, Last 2 bytes
+EMAC_SA4L       #  4 ;- Specific Address 4 Bottom, First 4 bytes
+EMAC_SA4H       #  4 ;- Specific Address 4 Top, Last 2 bytes
+EMAC_TID        #  4 ;- Type ID Checking Register
+EMAC_TPQ        #  4 ;- Transmit Pause Quantum Register
+EMAC_USRIO      #  4 ;- USER Input/Output Register
+EMAC_WOL        #  4 ;- Wake On LAN Register
+                # 52 ;- Reserved
+EMAC_REV        #  4 ;- Revision Register
+;- -------- EMAC_NCR : (EMAC Offset: 0x0)  -------- 
+AT91C_EMAC_LB             EQU (0x1:SHL:0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+AT91C_EMAC_LLB            EQU (0x1:SHL:1) ;- (EMAC) Loopback local. 
+AT91C_EMAC_RE             EQU (0x1:SHL:2) ;- (EMAC) Receive enable. 
+AT91C_EMAC_TE             EQU (0x1:SHL:3) ;- (EMAC) Transmit enable. 
+AT91C_EMAC_MPE            EQU (0x1:SHL:4) ;- (EMAC) Management port enable. 
+AT91C_EMAC_CLRSTAT        EQU (0x1:SHL:5) ;- (EMAC) Clear statistics registers. 
+AT91C_EMAC_INCSTAT        EQU (0x1:SHL:6) ;- (EMAC) Increment statistics registers. 
+AT91C_EMAC_WESTAT         EQU (0x1:SHL:7) ;- (EMAC) Write enable for statistics registers. 
+AT91C_EMAC_BP             EQU (0x1:SHL:8) ;- (EMAC) Back pressure. 
+AT91C_EMAC_TSTART         EQU (0x1:SHL:9) ;- (EMAC) Start Transmission. 
+AT91C_EMAC_THALT          EQU (0x1:SHL:10) ;- (EMAC) Transmission Halt. 
+AT91C_EMAC_TPFR           EQU (0x1:SHL:11) ;- (EMAC) Transmit pause frame 
+AT91C_EMAC_TZQ            EQU (0x1:SHL:12) ;- (EMAC) Transmit zero quantum pause frame
+;- -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register -------- 
+AT91C_EMAC_SPD            EQU (0x1:SHL:0) ;- (EMAC) Speed. 
+AT91C_EMAC_FD             EQU (0x1:SHL:1) ;- (EMAC) Full duplex. 
+AT91C_EMAC_JFRAME         EQU (0x1:SHL:3) ;- (EMAC) Jumbo Frames. 
+AT91C_EMAC_CAF            EQU (0x1:SHL:4) ;- (EMAC) Copy all frames. 
+AT91C_EMAC_NBC            EQU (0x1:SHL:5) ;- (EMAC) No broadcast. 
+AT91C_EMAC_MTI            EQU (0x1:SHL:6) ;- (EMAC) Multicast hash event enable
+AT91C_EMAC_UNI            EQU (0x1:SHL:7) ;- (EMAC) Unicast hash enable. 
+AT91C_EMAC_BIG            EQU (0x1:SHL:8) ;- (EMAC) Receive 1522 bytes. 
+AT91C_EMAC_EAE            EQU (0x1:SHL:9) ;- (EMAC) External address match enable. 
+AT91C_EMAC_CLK            EQU (0x3:SHL:10) ;- (EMAC) 
+AT91C_EMAC_CLK_HCLK_8     EQU (0x0:SHL:10) ;- (EMAC) HCLK divided by 8
+AT91C_EMAC_CLK_HCLK_16    EQU (0x1:SHL:10) ;- (EMAC) HCLK divided by 16
+AT91C_EMAC_CLK_HCLK_32    EQU (0x2:SHL:10) ;- (EMAC) HCLK divided by 32
+AT91C_EMAC_CLK_HCLK_64    EQU (0x3:SHL:10) ;- (EMAC) HCLK divided by 64
+AT91C_EMAC_RTY            EQU (0x1:SHL:12) ;- (EMAC) 
+AT91C_EMAC_PAE            EQU (0x1:SHL:13) ;- (EMAC) 
+AT91C_EMAC_RBOF           EQU (0x3:SHL:14) ;- (EMAC) 
+AT91C_EMAC_RBOF_OFFSET_0  EQU (0x0:SHL:14) ;- (EMAC) no offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_1  EQU (0x1:SHL:14) ;- (EMAC) one byte offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_2  EQU (0x2:SHL:14) ;- (EMAC) two bytes offset from start of receive buffer
+AT91C_EMAC_RBOF_OFFSET_3  EQU (0x3:SHL:14) ;- (EMAC) three bytes offset from start of receive buffer
+AT91C_EMAC_RLCE           EQU (0x1:SHL:16) ;- (EMAC) Receive Length field Checking Enable
+AT91C_EMAC_DRFCS          EQU (0x1:SHL:17) ;- (EMAC) Discard Receive FCS
+AT91C_EMAC_EFRHD          EQU (0x1:SHL:18) ;- (EMAC) 
+AT91C_EMAC_IRXFCS         EQU (0x1:SHL:19) ;- (EMAC) Ignore RX FCS
+;- -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register -------- 
+AT91C_EMAC_LINKR          EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_MDIO           EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_IDLE           EQU (0x1:SHL:2) ;- (EMAC) 
+;- -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register -------- 
+AT91C_EMAC_UBR            EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_COL            EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_RLES           EQU (0x1:SHL:2) ;- (EMAC) 
+AT91C_EMAC_TGO            EQU (0x1:SHL:3) ;- (EMAC) Transmit Go
+AT91C_EMAC_BEX            EQU (0x1:SHL:4) ;- (EMAC) Buffers exhausted mid frame
+AT91C_EMAC_COMP           EQU (0x1:SHL:5) ;- (EMAC) 
+AT91C_EMAC_UND            EQU (0x1:SHL:6) ;- (EMAC) 
+;- -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- 
+AT91C_EMAC_BNA            EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_REC            EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_OVR            EQU (0x1:SHL:2) ;- (EMAC) 
+;- -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- 
+AT91C_EMAC_MFD            EQU (0x1:SHL:0) ;- (EMAC) 
+AT91C_EMAC_RCOMP          EQU (0x1:SHL:1) ;- (EMAC) 
+AT91C_EMAC_RXUBR          EQU (0x1:SHL:2) ;- (EMAC) 
+AT91C_EMAC_TXUBR          EQU (0x1:SHL:3) ;- (EMAC) 
+AT91C_EMAC_TUNDR          EQU (0x1:SHL:4) ;- (EMAC) 
+AT91C_EMAC_RLEX           EQU (0x1:SHL:5) ;- (EMAC) 
+AT91C_EMAC_TXERR          EQU (0x1:SHL:6) ;- (EMAC) 
+AT91C_EMAC_TCOMP          EQU (0x1:SHL:7) ;- (EMAC) 
+AT91C_EMAC_LINK           EQU (0x1:SHL:9) ;- (EMAC) 
+AT91C_EMAC_ROVR           EQU (0x1:SHL:10) ;- (EMAC) 
+AT91C_EMAC_HRESP          EQU (0x1:SHL:11) ;- (EMAC) 
+AT91C_EMAC_PFRE           EQU (0x1:SHL:12) ;- (EMAC) 
+AT91C_EMAC_PTZ            EQU (0x1:SHL:13) ;- (EMAC) 
+;- -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- 
+;- -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- 
+;- -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- 
+;- -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- 
+AT91C_EMAC_DATA           EQU (0xFFFF:SHL:0) ;- (EMAC) 
+AT91C_EMAC_CODE           EQU (0x3:SHL:16) ;- (EMAC) 
+AT91C_EMAC_REGA           EQU (0x1F:SHL:18) ;- (EMAC) 
+AT91C_EMAC_PHYA           EQU (0x1F:SHL:23) ;- (EMAC) 
+AT91C_EMAC_RW             EQU (0x3:SHL:28) ;- (EMAC) 
+AT91C_EMAC_SOF            EQU (0x3:SHL:30) ;- (EMAC) 
+;- -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register -------- 
+AT91C_EMAC_RMII           EQU (0x1:SHL:0) ;- (EMAC) Reduce MII
+AT91C_EMAC_CLKEN          EQU (0x1:SHL:1) ;- (EMAC) Clock Enable
+;- -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register -------- 
+AT91C_EMAC_IP             EQU (0xFFFF:SHL:0) ;- (EMAC) ARP request IP address
+AT91C_EMAC_MAG            EQU (0x1:SHL:16) ;- (EMAC) Magic packet event enable
+AT91C_EMAC_ARP            EQU (0x1:SHL:17) ;- (EMAC) ARP request event enable
+AT91C_EMAC_SA1            EQU (0x1:SHL:18) ;- (EMAC) Specific address register 1 event enable
+;- -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register -------- 
+AT91C_EMAC_REVREF         EQU (0xFFFF:SHL:0) ;- (EMAC) 
+AT91C_EMAC_PARTREF        EQU (0xFFFF:SHL:16) ;- (EMAC) 
+
+;- *****************************************************************************
+;-              SOFTWARE API DEFINITION  FOR Analog to Digital Convertor
+;- *****************************************************************************
+                ^ 0 ;- AT91S_ADC
+ADC_CR          #  4 ;- ADC Control Register
+ADC_MR          #  4 ;- ADC Mode Register
+                #  8 ;- Reserved
+ADC_CHER        #  4 ;- ADC Channel Enable Register
+ADC_CHDR        #  4 ;- ADC Channel Disable Register
+ADC_CHSR        #  4 ;- ADC Channel Status Register
+ADC_SR          #  4 ;- ADC Status Register
+ADC_LCDR        #  4 ;- ADC Last Converted Data Register
+ADC_IER         #  4 ;- ADC Interrupt Enable Register
+ADC_IDR         #  4 ;- ADC Interrupt Disable Register
+ADC_IMR         #  4 ;- ADC Interrupt Mask Register
+ADC_CDR0        #  4 ;- ADC Channel Data Register 0
+ADC_CDR1        #  4 ;- ADC Channel Data Register 1
+ADC_CDR2        #  4 ;- ADC Channel Data Register 2
+ADC_CDR3        #  4 ;- ADC Channel Data Register 3
+ADC_CDR4        #  4 ;- ADC Channel Data Register 4
+ADC_CDR5        #  4 ;- ADC Channel Data Register 5
+ADC_CDR6        #  4 ;- ADC Channel Data Register 6
+ADC_CDR7        #  4 ;- ADC Channel Data Register 7
+                # 176 ;- Reserved
+ADC_RPR         #  4 ;- Receive Pointer Register
+ADC_RCR         #  4 ;- Receive Counter Register
+ADC_TPR         #  4 ;- Transmit Pointer Register
+ADC_TCR         #  4 ;- Transmit Counter Register
+ADC_RNPR        #  4 ;- Receive Next Pointer Register
+ADC_RNCR        #  4 ;- Receive Next Counter Register
+ADC_TNPR        #  4 ;- Transmit Next Pointer Register
+ADC_TNCR        #  4 ;- Transmit Next Counter Register
+ADC_PTCR        #  4 ;- PDC Transfer Control Register
+ADC_PTSR        #  4 ;- PDC Transfer Status Register
+;- -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register -------- 
+AT91C_ADC_SWRST           EQU (0x1:SHL:0) ;- (ADC) Software Reset
+AT91C_ADC_START           EQU (0x1:SHL:1) ;- (ADC) Start Conversion
+;- -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register -------- 
+AT91C_ADC_TRGEN           EQU (0x1:SHL:0) ;- (ADC) Trigger Enable
+AT91C_ADC_TRGEN_DIS       EQU (0x0) ;- (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software
+AT91C_ADC_TRGEN_EN        EQU (0x1) ;- (ADC) Hardware trigger selected by TRGSEL field is enabled.
+AT91C_ADC_TRGSEL          EQU (0x7:SHL:1) ;- (ADC) Trigger Selection
+AT91C_ADC_TRGSEL_TIOA0    EQU (0x0:SHL:1) ;- (ADC) Selected TRGSEL = TIAO0
+AT91C_ADC_TRGSEL_TIOA1    EQU (0x1:SHL:1) ;- (ADC) Selected TRGSEL = TIAO1
+AT91C_ADC_TRGSEL_TIOA2    EQU (0x2:SHL:1) ;- (ADC) Selected TRGSEL = TIAO2
+AT91C_ADC_TRGSEL_TIOA3    EQU (0x3:SHL:1) ;- (ADC) Selected TRGSEL = TIAO3
+AT91C_ADC_TRGSEL_TIOA4    EQU (0x4:SHL:1) ;- (ADC) Selected TRGSEL = TIAO4
+AT91C_ADC_TRGSEL_TIOA5    EQU (0x5:SHL:1) ;- (ADC) Selected TRGSEL = TIAO5
+AT91C_ADC_TRGSEL_EXT      EQU (0x6:SHL:1) ;- (ADC) Selected TRGSEL = External Trigger
+AT91C_ADC_LOWRES          EQU (0x1:SHL:4) ;- (ADC) Resolution.
+AT91C_ADC_LOWRES_10_BIT   EQU (0x0:SHL:4) ;- (ADC) 10-bit resolution
+AT91C_ADC_LOWRES_8_BIT    EQU (0x1:SHL:4) ;- (ADC) 8-bit resolution
+AT91C_ADC_SLEEP           EQU (0x1:SHL:5) ;- (ADC) Sleep Mode
+AT91C_ADC_SLEEP_NORMAL_MODE EQU (0x0:SHL:5) ;- (ADC) Normal Mode
+AT91C_ADC_SLEEP_MODE      EQU (0x1:SHL:5) ;- (ADC) Sleep Mode
+AT91C_ADC_PRESCAL         EQU (0x3F:SHL:8) ;- (ADC) Prescaler rate selection
+AT91C_ADC_STARTUP         EQU (0x1F:SHL:16) ;- (ADC) Startup Time
+AT91C_ADC_SHTIM           EQU (0xF:SHL:24) ;- (ADC) Sample & Hold Time
+;- -------- 	ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register -------- 
+AT91C_ADC_CH0             EQU (0x1:SHL:0) ;- (ADC) Channel 0
+AT91C_ADC_CH1             EQU (0x1:SHL:1) ;- (ADC) Channel 1
+AT91C_ADC_CH2             EQU (0x1:SHL:2) ;- (ADC) Channel 2
+AT91C_ADC_CH3             EQU (0x1:SHL:3) ;- (ADC) Channel 3
+AT91C_ADC_CH4             EQU (0x1:SHL:4) ;- (ADC) Channel 4
+AT91C_ADC_CH5             EQU (0x1:SHL:5) ;- (ADC) Channel 5
+AT91C_ADC_CH6             EQU (0x1:SHL:6) ;- (ADC) Channel 6
+AT91C_ADC_CH7             EQU (0x1:SHL:7) ;- (ADC) Channel 7
+;- -------- 	ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register -------- 
+;- -------- 	ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register -------- 
+;- -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register -------- 
+AT91C_ADC_EOC0            EQU (0x1:SHL:0) ;- (ADC) End of Conversion
+AT91C_ADC_EOC1            EQU (0x1:SHL:1) ;- (ADC) End of Conversion
+AT91C_ADC_EOC2            EQU (0x1:SHL:2) ;- (ADC) End of Conversion
+AT91C_ADC_EOC3            EQU (0x1:SHL:3) ;- (ADC) End of Conversion
+AT91C_ADC_EOC4            EQU (0x1:SHL:4) ;- (ADC) End of Conversion
+AT91C_ADC_EOC5            EQU (0x1:SHL:5) ;- (ADC) End of Conversion
+AT91C_ADC_EOC6            EQU (0x1:SHL:6) ;- (ADC) End of Conversion
+AT91C_ADC_EOC7            EQU (0x1:SHL:7) ;- (ADC) End of Conversion
+AT91C_ADC_OVRE0           EQU (0x1:SHL:8) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE1           EQU (0x1:SHL:9) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE2           EQU (0x1:SHL:10) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE3           EQU (0x1:SHL:11) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE4           EQU (0x1:SHL:12) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE5           EQU (0x1:SHL:13) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE6           EQU (0x1:SHL:14) ;- (ADC) Overrun Error
+AT91C_ADC_OVRE7           EQU (0x1:SHL:15) ;- (ADC) Overrun Error
+AT91C_ADC_DRDY            EQU (0x1:SHL:16) ;- (ADC) Data Ready
+AT91C_ADC_GOVRE           EQU (0x1:SHL:17) ;- (ADC) General Overrun
+AT91C_ADC_ENDRX           EQU (0x1:SHL:18) ;- (ADC) End of Receiver Transfer
+AT91C_ADC_RXBUFF          EQU (0x1:SHL:19) ;- (ADC) RXBUFF Interrupt
+;- -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register -------- 
+AT91C_ADC_LDATA           EQU (0x3FF:SHL:0) ;- (ADC) Last Data Converted
+;- -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register -------- 
+;- -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register -------- 
+;- -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register -------- 
+;- -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 -------- 
+AT91C_ADC_DATA            EQU (0x3FF:SHL:0) ;- (ADC) Converted Data
+;- -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 -------- 
+;- -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 -------- 
+;- -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 -------- 
+;- -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 -------- 
+;- -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 -------- 
+;- -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 -------- 
+;- -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 -------- 
+
+;- *****************************************************************************
+;-               REGISTER ADDRESS DEFINITION FOR AT91SAM7X256
+;- *****************************************************************************
+;- ========== Register definition for SYS peripheral ========== 
+;- ========== Register definition for AIC peripheral ========== 
+AT91C_AIC_IVR             EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register
+AT91C_AIC_SMR             EQU (0xFFFFF000) ;- (AIC) Source Mode Register
+AT91C_AIC_FVR             EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register
+AT91C_AIC_DCR             EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect)
+AT91C_AIC_EOICR           EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register
+AT91C_AIC_SVR             EQU (0xFFFFF080) ;- (AIC) Source Vector Register
+AT91C_AIC_FFSR            EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register
+AT91C_AIC_ICCR            EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register
+AT91C_AIC_ISR             EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register
+AT91C_AIC_IMR             EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register
+AT91C_AIC_IPR             EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register
+AT91C_AIC_FFER            EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register
+AT91C_AIC_IECR            EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register
+AT91C_AIC_ISCR            EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register
+AT91C_AIC_FFDR            EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register
+AT91C_AIC_CISR            EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register
+AT91C_AIC_IDCR            EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register
+AT91C_AIC_SPU             EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register
+;- ========== Register definition for PDC_DBGU peripheral ========== 
+AT91C_DBGU_TCR            EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register
+AT91C_DBGU_RNPR           EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register
+AT91C_DBGU_TNPR           EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register
+AT91C_DBGU_TPR            EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register
+AT91C_DBGU_RPR            EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register
+AT91C_DBGU_RCR            EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register
+AT91C_DBGU_RNCR           EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register
+AT91C_DBGU_PTCR           EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register
+AT91C_DBGU_PTSR           EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register
+AT91C_DBGU_TNCR           EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register
+;- ========== Register definition for DBGU peripheral ========== 
+AT91C_DBGU_EXID           EQU (0xFFFFF244) ;- (DBGU) Chip ID Extension Register
+AT91C_DBGU_BRGR           EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register
+AT91C_DBGU_IDR            EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register
+AT91C_DBGU_CSR            EQU (0xFFFFF214) ;- (DBGU) Channel Status Register
+AT91C_DBGU_CIDR           EQU (0xFFFFF240) ;- (DBGU) Chip ID Register
+AT91C_DBGU_MR             EQU (0xFFFFF204) ;- (DBGU) Mode Register
+AT91C_DBGU_IMR            EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register
+AT91C_DBGU_CR             EQU (0xFFFFF200) ;- (DBGU) Control Register
+AT91C_DBGU_FNTR           EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register
+AT91C_DBGU_THR            EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register
+AT91C_DBGU_RHR            EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register
+AT91C_DBGU_IER            EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register
+;- ========== Register definition for PIOA peripheral ========== 
+AT91C_PIOA_ODR            EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr
+AT91C_PIOA_SODR           EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register
+AT91C_PIOA_ISR            EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register
+AT91C_PIOA_ABSR           EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register
+AT91C_PIOA_IER            EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register
+AT91C_PIOA_PPUDR          EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register
+AT91C_PIOA_IMR            EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register
+AT91C_PIOA_PER            EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register
+AT91C_PIOA_IFDR           EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register
+AT91C_PIOA_OWDR           EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register
+AT91C_PIOA_MDSR           EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register
+AT91C_PIOA_IDR            EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register
+AT91C_PIOA_ODSR           EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register
+AT91C_PIOA_PPUSR          EQU (0xFFFFF468) ;- (PIOA) Pull-up Status Register
+AT91C_PIOA_OWSR           EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register
+AT91C_PIOA_BSR            EQU (0xFFFFF474) ;- (PIOA) Select B Register
+AT91C_PIOA_OWER           EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register
+AT91C_PIOA_IFER           EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register
+AT91C_PIOA_PDSR           EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register
+AT91C_PIOA_PPUER          EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register
+AT91C_PIOA_OSR            EQU (0xFFFFF418) ;- (PIOA) Output Status Register
+AT91C_PIOA_ASR            EQU (0xFFFFF470) ;- (PIOA) Select A Register
+AT91C_PIOA_MDDR           EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register
+AT91C_PIOA_CODR           EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register
+AT91C_PIOA_MDER           EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register
+AT91C_PIOA_PDR            EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register
+AT91C_PIOA_IFSR           EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register
+AT91C_PIOA_OER            EQU (0xFFFFF410) ;- (PIOA) Output Enable Register
+AT91C_PIOA_PSR            EQU (0xFFFFF408) ;- (PIOA) PIO Status Register
+;- ========== Register definition for PIOB peripheral ========== 
+AT91C_PIOB_OWDR           EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register
+AT91C_PIOB_MDER           EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register
+AT91C_PIOB_PPUSR          EQU (0xFFFFF668) ;- (PIOB) Pull-up Status Register
+AT91C_PIOB_IMR            EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register
+AT91C_PIOB_ASR            EQU (0xFFFFF670) ;- (PIOB) Select A Register
+AT91C_PIOB_PPUDR          EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register
+AT91C_PIOB_PSR            EQU (0xFFFFF608) ;- (PIOB) PIO Status Register
+AT91C_PIOB_IER            EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register
+AT91C_PIOB_CODR           EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register
+AT91C_PIOB_OWER           EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register
+AT91C_PIOB_ABSR           EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register
+AT91C_PIOB_IFDR           EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register
+AT91C_PIOB_PDSR           EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register
+AT91C_PIOB_IDR            EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register
+AT91C_PIOB_OWSR           EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register
+AT91C_PIOB_PDR            EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register
+AT91C_PIOB_ODR            EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr
+AT91C_PIOB_IFSR           EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register
+AT91C_PIOB_PPUER          EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register
+AT91C_PIOB_SODR           EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register
+AT91C_PIOB_ISR            EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register
+AT91C_PIOB_ODSR           EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register
+AT91C_PIOB_OSR            EQU (0xFFFFF618) ;- (PIOB) Output Status Register
+AT91C_PIOB_MDSR           EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register
+AT91C_PIOB_IFER           EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register
+AT91C_PIOB_BSR            EQU (0xFFFFF674) ;- (PIOB) Select B Register
+AT91C_PIOB_MDDR           EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register
+AT91C_PIOB_OER            EQU (0xFFFFF610) ;- (PIOB) Output Enable Register
+AT91C_PIOB_PER            EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register
+;- ========== Register definition for CKGR peripheral ========== 
+AT91C_CKGR_MOR            EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register
+AT91C_CKGR_PLLR           EQU (0xFFFFFC2C) ;- (CKGR) PLL Register
+AT91C_CKGR_MCFR           EQU (0xFFFFFC24) ;- (CKGR) Main Clock  Frequency Register
+;- ========== Register definition for PMC peripheral ========== 
+AT91C_PMC_IDR             EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register
+AT91C_PMC_MOR             EQU (0xFFFFFC20) ;- (PMC) Main Oscillator Register
+AT91C_PMC_PLLR            EQU (0xFFFFFC2C) ;- (PMC) PLL Register
+AT91C_PMC_PCER            EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register
+AT91C_PMC_PCKR            EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register
+AT91C_PMC_MCKR            EQU (0xFFFFFC30) ;- (PMC) Master Clock Register
+AT91C_PMC_SCDR            EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register
+AT91C_PMC_PCDR            EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register
+AT91C_PMC_SCSR            EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register
+AT91C_PMC_PCSR            EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register
+AT91C_PMC_MCFR            EQU (0xFFFFFC24) ;- (PMC) Main Clock  Frequency Register
+AT91C_PMC_SCER            EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register
+AT91C_PMC_IMR             EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register
+AT91C_PMC_IER             EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register
+AT91C_PMC_SR              EQU (0xFFFFFC68) ;- (PMC) Status Register
+;- ========== Register definition for RSTC peripheral ========== 
+AT91C_RSTC_RCR            EQU (0xFFFFFD00) ;- (RSTC) Reset Control Register
+AT91C_RSTC_RMR            EQU (0xFFFFFD08) ;- (RSTC) Reset Mode Register
+AT91C_RSTC_RSR            EQU (0xFFFFFD04) ;- (RSTC) Reset Status Register
+;- ========== Register definition for RTTC peripheral ========== 
+AT91C_RTTC_RTSR           EQU (0xFFFFFD2C) ;- (RTTC) Real-time Status Register
+AT91C_RTTC_RTMR           EQU (0xFFFFFD20) ;- (RTTC) Real-time Mode Register
+AT91C_RTTC_RTVR           EQU (0xFFFFFD28) ;- (RTTC) Real-time Value Register
+AT91C_RTTC_RTAR           EQU (0xFFFFFD24) ;- (RTTC) Real-time Alarm Register
+;- ========== Register definition for PITC peripheral ========== 
+AT91C_PITC_PIVR           EQU (0xFFFFFD38) ;- (PITC) Period Interval Value Register
+AT91C_PITC_PISR           EQU (0xFFFFFD34) ;- (PITC) Period Interval Status Register
+AT91C_PITC_PIIR           EQU (0xFFFFFD3C) ;- (PITC) Period Interval Image Register
+AT91C_PITC_PIMR           EQU (0xFFFFFD30) ;- (PITC) Period Interval Mode Register
+;- ========== Register definition for WDTC peripheral ========== 
+AT91C_WDTC_WDCR           EQU (0xFFFFFD40) ;- (WDTC) Watchdog Control Register
+AT91C_WDTC_WDSR           EQU (0xFFFFFD48) ;- (WDTC) Watchdog Status Register
+AT91C_WDTC_WDMR           EQU (0xFFFFFD44) ;- (WDTC) Watchdog Mode Register
+;- ========== Register definition for VREG peripheral ========== 
+AT91C_VREG_MR             EQU (0xFFFFFD60) ;- (VREG) Voltage Regulator Mode Register
+;- ========== Register definition for MC peripheral ========== 
+AT91C_MC_ASR              EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register
+AT91C_MC_RCR              EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register
+AT91C_MC_FCR              EQU (0xFFFFFF64) ;- (MC) MC Flash Command Register
+AT91C_MC_AASR             EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register
+AT91C_MC_FSR              EQU (0xFFFFFF68) ;- (MC) MC Flash Status Register
+AT91C_MC_FMR              EQU (0xFFFFFF60) ;- (MC) MC Flash Mode Register
+;- ========== Register definition for PDC_SPI1 peripheral ========== 
+AT91C_SPI1_PTCR           EQU (0xFFFE4120) ;- (PDC_SPI1) PDC Transfer Control Register
+AT91C_SPI1_RPR            EQU (0xFFFE4100) ;- (PDC_SPI1) Receive Pointer Register
+AT91C_SPI1_TNCR           EQU (0xFFFE411C) ;- (PDC_SPI1) Transmit Next Counter Register
+AT91C_SPI1_TPR            EQU (0xFFFE4108) ;- (PDC_SPI1) Transmit Pointer Register
+AT91C_SPI1_TNPR           EQU (0xFFFE4118) ;- (PDC_SPI1) Transmit Next Pointer Register
+AT91C_SPI1_TCR            EQU (0xFFFE410C) ;- (PDC_SPI1) Transmit Counter Register
+AT91C_SPI1_RCR            EQU (0xFFFE4104) ;- (PDC_SPI1) Receive Counter Register
+AT91C_SPI1_RNPR           EQU (0xFFFE4110) ;- (PDC_SPI1) Receive Next Pointer Register
+AT91C_SPI1_RNCR           EQU (0xFFFE4114) ;- (PDC_SPI1) Receive Next Counter Register
+AT91C_SPI1_PTSR           EQU (0xFFFE4124) ;- (PDC_SPI1) PDC Transfer Status Register
+;- ========== Register definition for SPI1 peripheral ========== 
+AT91C_SPI1_IMR            EQU (0xFFFE401C) ;- (SPI1) Interrupt Mask Register
+AT91C_SPI1_IER            EQU (0xFFFE4014) ;- (SPI1) Interrupt Enable Register
+AT91C_SPI1_MR             EQU (0xFFFE4004) ;- (SPI1) Mode Register
+AT91C_SPI1_RDR            EQU (0xFFFE4008) ;- (SPI1) Receive Data Register
+AT91C_SPI1_IDR            EQU (0xFFFE4018) ;- (SPI1) Interrupt Disable Register
+AT91C_SPI1_SR             EQU (0xFFFE4010) ;- (SPI1) Status Register
+AT91C_SPI1_TDR            EQU (0xFFFE400C) ;- (SPI1) Transmit Data Register
+AT91C_SPI1_CR             EQU (0xFFFE4000) ;- (SPI1) Control Register
+AT91C_SPI1_CSR            EQU (0xFFFE4030) ;- (SPI1) Chip Select Register
+;- ========== Register definition for PDC_SPI0 peripheral ========== 
+AT91C_SPI0_PTCR           EQU (0xFFFE0120) ;- (PDC_SPI0) PDC Transfer Control Register
+AT91C_SPI0_TPR            EQU (0xFFFE0108) ;- (PDC_SPI0) Transmit Pointer Register
+AT91C_SPI0_TCR            EQU (0xFFFE010C) ;- (PDC_SPI0) Transmit Counter Register
+AT91C_SPI0_RCR            EQU (0xFFFE0104) ;- (PDC_SPI0) Receive Counter Register
+AT91C_SPI0_PTSR           EQU (0xFFFE0124) ;- (PDC_SPI0) PDC Transfer Status Register
+AT91C_SPI0_RNPR           EQU (0xFFFE0110) ;- (PDC_SPI0) Receive Next Pointer Register
+AT91C_SPI0_RPR            EQU (0xFFFE0100) ;- (PDC_SPI0) Receive Pointer Register
+AT91C_SPI0_TNCR           EQU (0xFFFE011C) ;- (PDC_SPI0) Transmit Next Counter Register
+AT91C_SPI0_RNCR           EQU (0xFFFE0114) ;- (PDC_SPI0) Receive Next Counter Register
+AT91C_SPI0_TNPR           EQU (0xFFFE0118) ;- (PDC_SPI0) Transmit Next Pointer Register
+;- ========== Register definition for SPI0 peripheral ========== 
+AT91C_SPI0_IER            EQU (0xFFFE0014) ;- (SPI0) Interrupt Enable Register
+AT91C_SPI0_SR             EQU (0xFFFE0010) ;- (SPI0) Status Register
+AT91C_SPI0_IDR            EQU (0xFFFE0018) ;- (SPI0) Interrupt Disable Register
+AT91C_SPI0_CR             EQU (0xFFFE0000) ;- (SPI0) Control Register
+AT91C_SPI0_MR             EQU (0xFFFE0004) ;- (SPI0) Mode Register
+AT91C_SPI0_IMR            EQU (0xFFFE001C) ;- (SPI0) Interrupt Mask Register
+AT91C_SPI0_TDR            EQU (0xFFFE000C) ;- (SPI0) Transmit Data Register
+AT91C_SPI0_RDR            EQU (0xFFFE0008) ;- (SPI0) Receive Data Register
+AT91C_SPI0_CSR            EQU (0xFFFE0030) ;- (SPI0) Chip Select Register
+;- ========== Register definition for PDC_US1 peripheral ========== 
+AT91C_US1_RNCR            EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register
+AT91C_US1_PTCR            EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register
+AT91C_US1_TCR             EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register
+AT91C_US1_PTSR            EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register
+AT91C_US1_TNPR            EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register
+AT91C_US1_RCR             EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register
+AT91C_US1_RNPR            EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register
+AT91C_US1_RPR             EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register
+AT91C_US1_TNCR            EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register
+AT91C_US1_TPR             EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register
+;- ========== Register definition for US1 peripheral ========== 
+AT91C_US1_IF              EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register
+AT91C_US1_NER             EQU (0xFFFC4044) ;- (US1) Nb Errors Register
+AT91C_US1_RTOR            EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register
+AT91C_US1_CSR             EQU (0xFFFC4014) ;- (US1) Channel Status Register
+AT91C_US1_IDR             EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register
+AT91C_US1_IER             EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register
+AT91C_US1_THR             EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register
+AT91C_US1_TTGR            EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register
+AT91C_US1_RHR             EQU (0xFFFC4018) ;- (US1) Receiver Holding Register
+AT91C_US1_BRGR            EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register
+AT91C_US1_IMR             EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register
+AT91C_US1_FIDI            EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register
+AT91C_US1_CR              EQU (0xFFFC4000) ;- (US1) Control Register
+AT91C_US1_MR              EQU (0xFFFC4004) ;- (US1) Mode Register
+;- ========== Register definition for PDC_US0 peripheral ========== 
+AT91C_US0_TNPR            EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register
+AT91C_US0_RNPR            EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register
+AT91C_US0_TCR             EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register
+AT91C_US0_PTCR            EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register
+AT91C_US0_PTSR            EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register
+AT91C_US0_TNCR            EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register
+AT91C_US0_TPR             EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register
+AT91C_US0_RCR             EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register
+AT91C_US0_RPR             EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register
+AT91C_US0_RNCR            EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register
+;- ========== Register definition for US0 peripheral ========== 
+AT91C_US0_BRGR            EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register
+AT91C_US0_NER             EQU (0xFFFC0044) ;- (US0) Nb Errors Register
+AT91C_US0_CR              EQU (0xFFFC0000) ;- (US0) Control Register
+AT91C_US0_IMR             EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register
+AT91C_US0_FIDI            EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register
+AT91C_US0_TTGR            EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register
+AT91C_US0_MR              EQU (0xFFFC0004) ;- (US0) Mode Register
+AT91C_US0_RTOR            EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register
+AT91C_US0_CSR             EQU (0xFFFC0014) ;- (US0) Channel Status Register
+AT91C_US0_RHR             EQU (0xFFFC0018) ;- (US0) Receiver Holding Register
+AT91C_US0_IDR             EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register
+AT91C_US0_THR             EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register
+AT91C_US0_IF              EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register
+AT91C_US0_IER             EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register
+;- ========== Register definition for PDC_SSC peripheral ========== 
+AT91C_SSC_TNCR            EQU (0xFFFD411C) ;- (PDC_SSC) Transmit Next Counter Register
+AT91C_SSC_RPR             EQU (0xFFFD4100) ;- (PDC_SSC) Receive Pointer Register
+AT91C_SSC_RNCR            EQU (0xFFFD4114) ;- (PDC_SSC) Receive Next Counter Register
+AT91C_SSC_TPR             EQU (0xFFFD4108) ;- (PDC_SSC) Transmit Pointer Register
+AT91C_SSC_PTCR            EQU (0xFFFD4120) ;- (PDC_SSC) PDC Transfer Control Register
+AT91C_SSC_TCR             EQU (0xFFFD410C) ;- (PDC_SSC) Transmit Counter Register
+AT91C_SSC_RCR             EQU (0xFFFD4104) ;- (PDC_SSC) Receive Counter Register
+AT91C_SSC_RNPR            EQU (0xFFFD4110) ;- (PDC_SSC) Receive Next Pointer Register
+AT91C_SSC_TNPR            EQU (0xFFFD4118) ;- (PDC_SSC) Transmit Next Pointer Register
+AT91C_SSC_PTSR            EQU (0xFFFD4124) ;- (PDC_SSC) PDC Transfer Status Register
+;- ========== Register definition for SSC peripheral ========== 
+AT91C_SSC_RHR             EQU (0xFFFD4020) ;- (SSC) Receive Holding Register
+AT91C_SSC_RSHR            EQU (0xFFFD4030) ;- (SSC) Receive Sync Holding Register
+AT91C_SSC_TFMR            EQU (0xFFFD401C) ;- (SSC) Transmit Frame Mode Register
+AT91C_SSC_IDR             EQU (0xFFFD4048) ;- (SSC) Interrupt Disable Register
+AT91C_SSC_THR             EQU (0xFFFD4024) ;- (SSC) Transmit Holding Register
+AT91C_SSC_RCMR            EQU (0xFFFD4010) ;- (SSC) Receive Clock ModeRegister
+AT91C_SSC_IER             EQU (0xFFFD4044) ;- (SSC) Interrupt Enable Register
+AT91C_SSC_TSHR            EQU (0xFFFD4034) ;- (SSC) Transmit Sync Holding Register
+AT91C_SSC_SR              EQU (0xFFFD4040) ;- (SSC) Status Register
+AT91C_SSC_CMR             EQU (0xFFFD4004) ;- (SSC) Clock Mode Register
+AT91C_SSC_TCMR            EQU (0xFFFD4018) ;- (SSC) Transmit Clock Mode Register
+AT91C_SSC_CR              EQU (0xFFFD4000) ;- (SSC) Control Register
+AT91C_SSC_IMR             EQU (0xFFFD404C) ;- (SSC) Interrupt Mask Register
+AT91C_SSC_RFMR            EQU (0xFFFD4014) ;- (SSC) Receive Frame Mode Register
+;- ========== Register definition for TWI peripheral ========== 
+AT91C_TWI_IER             EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register
+AT91C_TWI_CR              EQU (0xFFFB8000) ;- (TWI) Control Register
+AT91C_TWI_SR              EQU (0xFFFB8020) ;- (TWI) Status Register
+AT91C_TWI_IMR             EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register
+AT91C_TWI_THR             EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register
+AT91C_TWI_IDR             EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register
+AT91C_TWI_IADR            EQU (0xFFFB800C) ;- (TWI) Internal Address Register
+AT91C_TWI_MMR             EQU (0xFFFB8004) ;- (TWI) Master Mode Register
+AT91C_TWI_CWGR            EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register
+AT91C_TWI_RHR             EQU (0xFFFB8030) ;- (TWI) Receive Holding Register
+;- ========== Register definition for PWMC_CH3 peripheral ========== 
+AT91C_PWMC_CH3_CUPDR      EQU (0xFFFCC270) ;- (PWMC_CH3) Channel Update Register
+AT91C_PWMC_CH3_Reserved   EQU (0xFFFCC274) ;- (PWMC_CH3) Reserved
+AT91C_PWMC_CH3_CPRDR      EQU (0xFFFCC268) ;- (PWMC_CH3) Channel Period Register
+AT91C_PWMC_CH3_CDTYR      EQU (0xFFFCC264) ;- (PWMC_CH3) Channel Duty Cycle Register
+AT91C_PWMC_CH3_CCNTR      EQU (0xFFFCC26C) ;- (PWMC_CH3) Channel Counter Register
+AT91C_PWMC_CH3_CMR        EQU (0xFFFCC260) ;- (PWMC_CH3) Channel Mode Register
+;- ========== Register definition for PWMC_CH2 peripheral ========== 
+AT91C_PWMC_CH2_Reserved   EQU (0xFFFCC254) ;- (PWMC_CH2) Reserved
+AT91C_PWMC_CH2_CMR        EQU (0xFFFCC240) ;- (PWMC_CH2) Channel Mode Register
+AT91C_PWMC_CH2_CCNTR      EQU (0xFFFCC24C) ;- (PWMC_CH2) Channel Counter Register
+AT91C_PWMC_CH2_CPRDR      EQU (0xFFFCC248) ;- (PWMC_CH2) Channel Period Register
+AT91C_PWMC_CH2_CUPDR      EQU (0xFFFCC250) ;- (PWMC_CH2) Channel Update Register
+AT91C_PWMC_CH2_CDTYR      EQU (0xFFFCC244) ;- (PWMC_CH2) Channel Duty Cycle Register
+;- ========== Register definition for PWMC_CH1 peripheral ========== 
+AT91C_PWMC_CH1_Reserved   EQU (0xFFFCC234) ;- (PWMC_CH1) Reserved
+AT91C_PWMC_CH1_CUPDR      EQU (0xFFFCC230) ;- (PWMC_CH1) Channel Update Register
+AT91C_PWMC_CH1_CPRDR      EQU (0xFFFCC228) ;- (PWMC_CH1) Channel Period Register
+AT91C_PWMC_CH1_CCNTR      EQU (0xFFFCC22C) ;- (PWMC_CH1) Channel Counter Register
+AT91C_PWMC_CH1_CDTYR      EQU (0xFFFCC224) ;- (PWMC_CH1) Channel Duty Cycle Register
+AT91C_PWMC_CH1_CMR        EQU (0xFFFCC220) ;- (PWMC_CH1) Channel Mode Register
+;- ========== Register definition for PWMC_CH0 peripheral ========== 
+AT91C_PWMC_CH0_Reserved   EQU (0xFFFCC214) ;- (PWMC_CH0) Reserved
+AT91C_PWMC_CH0_CPRDR      EQU (0xFFFCC208) ;- (PWMC_CH0) Channel Period Register
+AT91C_PWMC_CH0_CDTYR      EQU (0xFFFCC204) ;- (PWMC_CH0) Channel Duty Cycle Register
+AT91C_PWMC_CH0_CMR        EQU (0xFFFCC200) ;- (PWMC_CH0) Channel Mode Register
+AT91C_PWMC_CH0_CUPDR      EQU (0xFFFCC210) ;- (PWMC_CH0) Channel Update Register
+AT91C_PWMC_CH0_CCNTR      EQU (0xFFFCC20C) ;- (PWMC_CH0) Channel Counter Register
+;- ========== Register definition for PWMC peripheral ========== 
+AT91C_PWMC_IDR            EQU (0xFFFCC014) ;- (PWMC) PWMC Interrupt Disable Register
+AT91C_PWMC_DIS            EQU (0xFFFCC008) ;- (PWMC) PWMC Disable Register
+AT91C_PWMC_IER            EQU (0xFFFCC010) ;- (PWMC) PWMC Interrupt Enable Register
+AT91C_PWMC_VR             EQU (0xFFFCC0FC) ;- (PWMC) PWMC Version Register
+AT91C_PWMC_ISR            EQU (0xFFFCC01C) ;- (PWMC) PWMC Interrupt Status Register
+AT91C_PWMC_SR             EQU (0xFFFCC00C) ;- (PWMC) PWMC Status Register
+AT91C_PWMC_IMR            EQU (0xFFFCC018) ;- (PWMC) PWMC Interrupt Mask Register
+AT91C_PWMC_MR             EQU (0xFFFCC000) ;- (PWMC) PWMC Mode Register
+AT91C_PWMC_ENA            EQU (0xFFFCC004) ;- (PWMC) PWMC Enable Register
+;- ========== Register definition for UDP peripheral ========== 
+AT91C_UDP_IMR             EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register
+AT91C_UDP_FADDR           EQU (0xFFFB0008) ;- (UDP) Function Address Register
+AT91C_UDP_NUM             EQU (0xFFFB0000) ;- (UDP) Frame Number Register
+AT91C_UDP_FDR             EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register
+AT91C_UDP_ISR             EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register
+AT91C_UDP_CSR             EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register
+AT91C_UDP_IDR             EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register
+AT91C_UDP_ICR             EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register
+AT91C_UDP_RSTEP           EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register
+AT91C_UDP_TXVC            EQU (0xFFFB0074) ;- (UDP) Transceiver Control Register
+AT91C_UDP_GLBSTATE        EQU (0xFFFB0004) ;- (UDP) Global State Register
+AT91C_UDP_IER             EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register
+;- ========== Register definition for TC0 peripheral ========== 
+AT91C_TC0_SR              EQU (0xFFFA0020) ;- (TC0) Status Register
+AT91C_TC0_RC              EQU (0xFFFA001C) ;- (TC0) Register C
+AT91C_TC0_RB              EQU (0xFFFA0018) ;- (TC0) Register B
+AT91C_TC0_CCR             EQU (0xFFFA0000) ;- (TC0) Channel Control Register
+AT91C_TC0_CMR             EQU (0xFFFA0004) ;- (TC0) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC0_IER             EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register
+AT91C_TC0_RA              EQU (0xFFFA0014) ;- (TC0) Register A
+AT91C_TC0_IDR             EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register
+AT91C_TC0_CV              EQU (0xFFFA0010) ;- (TC0) Counter Value
+AT91C_TC0_IMR             EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register
+;- ========== Register definition for TC1 peripheral ========== 
+AT91C_TC1_RB              EQU (0xFFFA0058) ;- (TC1) Register B
+AT91C_TC1_CCR             EQU (0xFFFA0040) ;- (TC1) Channel Control Register
+AT91C_TC1_IER             EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register
+AT91C_TC1_IDR             EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register
+AT91C_TC1_SR              EQU (0xFFFA0060) ;- (TC1) Status Register
+AT91C_TC1_CMR             EQU (0xFFFA0044) ;- (TC1) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC1_RA              EQU (0xFFFA0054) ;- (TC1) Register A
+AT91C_TC1_RC              EQU (0xFFFA005C) ;- (TC1) Register C
+AT91C_TC1_IMR             EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register
+AT91C_TC1_CV              EQU (0xFFFA0050) ;- (TC1) Counter Value
+;- ========== Register definition for TC2 peripheral ========== 
+AT91C_TC2_CMR             EQU (0xFFFA0084) ;- (TC2) Channel Mode Register (Capture Mode / Waveform Mode)
+AT91C_TC2_CCR             EQU (0xFFFA0080) ;- (TC2) Channel Control Register
+AT91C_TC2_CV              EQU (0xFFFA0090) ;- (TC2) Counter Value
+AT91C_TC2_RA              EQU (0xFFFA0094) ;- (TC2) Register A
+AT91C_TC2_RB              EQU (0xFFFA0098) ;- (TC2) Register B
+AT91C_TC2_IDR             EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register
+AT91C_TC2_IMR             EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register
+AT91C_TC2_RC              EQU (0xFFFA009C) ;- (TC2) Register C
+AT91C_TC2_IER             EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register
+AT91C_TC2_SR              EQU (0xFFFA00A0) ;- (TC2) Status Register
+;- ========== Register definition for TCB peripheral ========== 
+AT91C_TCB_BMR             EQU (0xFFFA00C4) ;- (TCB) TC Block Mode Register
+AT91C_TCB_BCR             EQU (0xFFFA00C0) ;- (TCB) TC Block Control Register
+;- ========== Register definition for CAN_MB0 peripheral ========== 
+AT91C_CAN_MB0_MDL         EQU (0xFFFD0214) ;- (CAN_MB0) MailBox Data Low Register
+AT91C_CAN_MB0_MAM         EQU (0xFFFD0204) ;- (CAN_MB0) MailBox Acceptance Mask Register
+AT91C_CAN_MB0_MCR         EQU (0xFFFD021C) ;- (CAN_MB0) MailBox Control Register
+AT91C_CAN_MB0_MID         EQU (0xFFFD0208) ;- (CAN_MB0) MailBox ID Register
+AT91C_CAN_MB0_MSR         EQU (0xFFFD0210) ;- (CAN_MB0) MailBox Status Register
+AT91C_CAN_MB0_MFID        EQU (0xFFFD020C) ;- (CAN_MB0) MailBox Family ID Register
+AT91C_CAN_MB0_MDH         EQU (0xFFFD0218) ;- (CAN_MB0) MailBox Data High Register
+AT91C_CAN_MB0_MMR         EQU (0xFFFD0200) ;- (CAN_MB0) MailBox Mode Register
+;- ========== Register definition for CAN_MB1 peripheral ========== 
+AT91C_CAN_MB1_MDL         EQU (0xFFFD0234) ;- (CAN_MB1) MailBox Data Low Register
+AT91C_CAN_MB1_MID         EQU (0xFFFD0228) ;- (CAN_MB1) MailBox ID Register
+AT91C_CAN_MB1_MMR         EQU (0xFFFD0220) ;- (CAN_MB1) MailBox Mode Register
+AT91C_CAN_MB1_MSR         EQU (0xFFFD0230) ;- (CAN_MB1) MailBox Status Register
+AT91C_CAN_MB1_MAM         EQU (0xFFFD0224) ;- (CAN_MB1) MailBox Acceptance Mask Register
+AT91C_CAN_MB1_MDH         EQU (0xFFFD0238) ;- (CAN_MB1) MailBox Data High Register
+AT91C_CAN_MB1_MCR         EQU (0xFFFD023C) ;- (CAN_MB1) MailBox Control Register
+AT91C_CAN_MB1_MFID        EQU (0xFFFD022C) ;- (CAN_MB1) MailBox Family ID Register
+;- ========== Register definition for CAN_MB2 peripheral ========== 
+AT91C_CAN_MB2_MCR         EQU (0xFFFD025C) ;- (CAN_MB2) MailBox Control Register
+AT91C_CAN_MB2_MDH         EQU (0xFFFD0258) ;- (CAN_MB2) MailBox Data High Register
+AT91C_CAN_MB2_MID         EQU (0xFFFD0248) ;- (CAN_MB2) MailBox ID Register
+AT91C_CAN_MB2_MDL         EQU (0xFFFD0254) ;- (CAN_MB2) MailBox Data Low Register
+AT91C_CAN_MB2_MMR         EQU (0xFFFD0240) ;- (CAN_MB2) MailBox Mode Register
+AT91C_CAN_MB2_MAM         EQU (0xFFFD0244) ;- (CAN_MB2) MailBox Acceptance Mask Register
+AT91C_CAN_MB2_MFID        EQU (0xFFFD024C) ;- (CAN_MB2) MailBox Family ID Register
+AT91C_CAN_MB2_MSR         EQU (0xFFFD0250) ;- (CAN_MB2) MailBox Status Register
+;- ========== Register definition for CAN_MB3 peripheral ========== 
+AT91C_CAN_MB3_MFID        EQU (0xFFFD026C) ;- (CAN_MB3) MailBox Family ID Register
+AT91C_CAN_MB3_MAM         EQU (0xFFFD0264) ;- (CAN_MB3) MailBox Acceptance Mask Register
+AT91C_CAN_MB3_MID         EQU (0xFFFD0268) ;- (CAN_MB3) MailBox ID Register
+AT91C_CAN_MB3_MCR         EQU (0xFFFD027C) ;- (CAN_MB3) MailBox Control Register
+AT91C_CAN_MB3_MMR         EQU (0xFFFD0260) ;- (CAN_MB3) MailBox Mode Register
+AT91C_CAN_MB3_MSR         EQU (0xFFFD0270) ;- (CAN_MB3) MailBox Status Register
+AT91C_CAN_MB3_MDL         EQU (0xFFFD0274) ;- (CAN_MB3) MailBox Data Low Register
+AT91C_CAN_MB3_MDH         EQU (0xFFFD0278) ;- (CAN_MB3) MailBox Data High Register
+;- ========== Register definition for CAN_MB4 peripheral ========== 
+AT91C_CAN_MB4_MID         EQU (0xFFFD0288) ;- (CAN_MB4) MailBox ID Register
+AT91C_CAN_MB4_MMR         EQU (0xFFFD0280) ;- (CAN_MB4) MailBox Mode Register
+AT91C_CAN_MB4_MDH         EQU (0xFFFD0298) ;- (CAN_MB4) MailBox Data High Register
+AT91C_CAN_MB4_MFID        EQU (0xFFFD028C) ;- (CAN_MB4) MailBox Family ID Register
+AT91C_CAN_MB4_MSR         EQU (0xFFFD0290) ;- (CAN_MB4) MailBox Status Register
+AT91C_CAN_MB4_MCR         EQU (0xFFFD029C) ;- (CAN_MB4) MailBox Control Register
+AT91C_CAN_MB4_MDL         EQU (0xFFFD0294) ;- (CAN_MB4) MailBox Data Low Register
+AT91C_CAN_MB4_MAM         EQU (0xFFFD0284) ;- (CAN_MB4) MailBox Acceptance Mask Register
+;- ========== Register definition for CAN_MB5 peripheral ========== 
+AT91C_CAN_MB5_MSR         EQU (0xFFFD02B0) ;- (CAN_MB5) MailBox Status Register
+AT91C_CAN_MB5_MCR         EQU (0xFFFD02BC) ;- (CAN_MB5) MailBox Control Register
+AT91C_CAN_MB5_MFID        EQU (0xFFFD02AC) ;- (CAN_MB5) MailBox Family ID Register
+AT91C_CAN_MB5_MDH         EQU (0xFFFD02B8) ;- (CAN_MB5) MailBox Data High Register
+AT91C_CAN_MB5_MID         EQU (0xFFFD02A8) ;- (CAN_MB5) MailBox ID Register
+AT91C_CAN_MB5_MMR         EQU (0xFFFD02A0) ;- (CAN_MB5) MailBox Mode Register
+AT91C_CAN_MB5_MDL         EQU (0xFFFD02B4) ;- (CAN_MB5) MailBox Data Low Register
+AT91C_CAN_MB5_MAM         EQU (0xFFFD02A4) ;- (CAN_MB5) MailBox Acceptance Mask Register
+;- ========== Register definition for CAN_MB6 peripheral ========== 
+AT91C_CAN_MB6_MFID        EQU (0xFFFD02CC) ;- (CAN_MB6) MailBox Family ID Register
+AT91C_CAN_MB6_MID         EQU (0xFFFD02C8) ;- (CAN_MB6) MailBox ID Register
+AT91C_CAN_MB6_MAM         EQU (0xFFFD02C4) ;- (CAN_MB6) MailBox Acceptance Mask Register
+AT91C_CAN_MB6_MSR         EQU (0xFFFD02D0) ;- (CAN_MB6) MailBox Status Register
+AT91C_CAN_MB6_MDL         EQU (0xFFFD02D4) ;- (CAN_MB6) MailBox Data Low Register
+AT91C_CAN_MB6_MCR         EQU (0xFFFD02DC) ;- (CAN_MB6) MailBox Control Register
+AT91C_CAN_MB6_MDH         EQU (0xFFFD02D8) ;- (CAN_MB6) MailBox Data High Register
+AT91C_CAN_MB6_MMR         EQU (0xFFFD02C0) ;- (CAN_MB6) MailBox Mode Register
+;- ========== Register definition for CAN_MB7 peripheral ========== 
+AT91C_CAN_MB7_MCR         EQU (0xFFFD02FC) ;- (CAN_MB7) MailBox Control Register
+AT91C_CAN_MB7_MDH         EQU (0xFFFD02F8) ;- (CAN_MB7) MailBox Data High Register
+AT91C_CAN_MB7_MFID        EQU (0xFFFD02EC) ;- (CAN_MB7) MailBox Family ID Register
+AT91C_CAN_MB7_MDL         EQU (0xFFFD02F4) ;- (CAN_MB7) MailBox Data Low Register
+AT91C_CAN_MB7_MID         EQU (0xFFFD02E8) ;- (CAN_MB7) MailBox ID Register
+AT91C_CAN_MB7_MMR         EQU (0xFFFD02E0) ;- (CAN_MB7) MailBox Mode Register
+AT91C_CAN_MB7_MAM         EQU (0xFFFD02E4) ;- (CAN_MB7) MailBox Acceptance Mask Register
+AT91C_CAN_MB7_MSR         EQU (0xFFFD02F0) ;- (CAN_MB7) MailBox Status Register
+;- ========== Register definition for CAN peripheral ========== 
+AT91C_CAN_TCR             EQU (0xFFFD0024) ;- (CAN) Transfer Command Register
+AT91C_CAN_IMR             EQU (0xFFFD000C) ;- (CAN) Interrupt Mask Register
+AT91C_CAN_IER             EQU (0xFFFD0004) ;- (CAN) Interrupt Enable Register
+AT91C_CAN_ECR             EQU (0xFFFD0020) ;- (CAN) Error Counter Register
+AT91C_CAN_TIMESTP         EQU (0xFFFD001C) ;- (CAN) Time Stamp Register
+AT91C_CAN_MR              EQU (0xFFFD0000) ;- (CAN) Mode Register
+AT91C_CAN_IDR             EQU (0xFFFD0008) ;- (CAN) Interrupt Disable Register
+AT91C_CAN_ACR             EQU (0xFFFD0028) ;- (CAN) Abort Command Register
+AT91C_CAN_TIM             EQU (0xFFFD0018) ;- (CAN) Timer Register
+AT91C_CAN_SR              EQU (0xFFFD0010) ;- (CAN) Status Register
+AT91C_CAN_BR              EQU (0xFFFD0014) ;- (CAN) Baudrate Register
+AT91C_CAN_VR              EQU (0xFFFD00FC) ;- (CAN) Version Register
+;- ========== Register definition for EMAC peripheral ========== 
+AT91C_EMAC_ISR            EQU (0xFFFDC024) ;- (EMAC) Interrupt Status Register
+AT91C_EMAC_SA4H           EQU (0xFFFDC0B4) ;- (EMAC) Specific Address 4 Top, Last 2 bytes
+AT91C_EMAC_SA1L           EQU (0xFFFDC098) ;- (EMAC) Specific Address 1 Bottom, First 4 bytes
+AT91C_EMAC_ELE            EQU (0xFFFDC078) ;- (EMAC) Excessive Length Errors Register
+AT91C_EMAC_LCOL           EQU (0xFFFDC05C) ;- (EMAC) Late Collision Register
+AT91C_EMAC_RLE            EQU (0xFFFDC088) ;- (EMAC) Receive Length Field Mismatch Register
+AT91C_EMAC_WOL            EQU (0xFFFDC0C4) ;- (EMAC) Wake On LAN Register
+AT91C_EMAC_DTF            EQU (0xFFFDC058) ;- (EMAC) Deferred Transmission Frame Register
+AT91C_EMAC_TUND           EQU (0xFFFDC064) ;- (EMAC) Transmit Underrun Error Register
+AT91C_EMAC_NCR            EQU (0xFFFDC000) ;- (EMAC) Network Control Register
+AT91C_EMAC_SA4L           EQU (0xFFFDC0B0) ;- (EMAC) Specific Address 4 Bottom, First 4 bytes
+AT91C_EMAC_RSR            EQU (0xFFFDC020) ;- (EMAC) Receive Status Register
+AT91C_EMAC_SA3L           EQU (0xFFFDC0A8) ;- (EMAC) Specific Address 3 Bottom, First 4 bytes
+AT91C_EMAC_TSR            EQU (0xFFFDC014) ;- (EMAC) Transmit Status Register
+AT91C_EMAC_IDR            EQU (0xFFFDC02C) ;- (EMAC) Interrupt Disable Register
+AT91C_EMAC_RSE            EQU (0xFFFDC074) ;- (EMAC) Receive Symbol Errors Register
+AT91C_EMAC_ECOL           EQU (0xFFFDC060) ;- (EMAC) Excessive Collision Register
+AT91C_EMAC_TID            EQU (0xFFFDC0B8) ;- (EMAC) Type ID Checking Register
+AT91C_EMAC_HRB            EQU (0xFFFDC090) ;- (EMAC) Hash Address Bottom[31:0]
+AT91C_EMAC_TBQP           EQU (0xFFFDC01C) ;- (EMAC) Transmit Buffer Queue Pointer
+AT91C_EMAC_USRIO          EQU (0xFFFDC0C0) ;- (EMAC) USER Input/Output Register
+AT91C_EMAC_PTR            EQU (0xFFFDC038) ;- (EMAC) Pause Time Register
+AT91C_EMAC_SA2H           EQU (0xFFFDC0A4) ;- (EMAC) Specific Address 2 Top, Last 2 bytes
+AT91C_EMAC_ROV            EQU (0xFFFDC070) ;- (EMAC) Receive Overrun Errors Register
+AT91C_EMAC_ALE            EQU (0xFFFDC054) ;- (EMAC) Alignment Error Register
+AT91C_EMAC_RJA            EQU (0xFFFDC07C) ;- (EMAC) Receive Jabbers Register
+AT91C_EMAC_RBQP           EQU (0xFFFDC018) ;- (EMAC) Receive Buffer Queue Pointer
+AT91C_EMAC_TPF            EQU (0xFFFDC08C) ;- (EMAC) Transmitted Pause Frames Register
+AT91C_EMAC_NCFGR          EQU (0xFFFDC004) ;- (EMAC) Network Configuration Register
+AT91C_EMAC_HRT            EQU (0xFFFDC094) ;- (EMAC) Hash Address Top[63:32]
+AT91C_EMAC_USF            EQU (0xFFFDC080) ;- (EMAC) Undersize Frames Register
+AT91C_EMAC_FCSE           EQU (0xFFFDC050) ;- (EMAC) Frame Check Sequence Error Register
+AT91C_EMAC_TPQ            EQU (0xFFFDC0BC) ;- (EMAC) Transmit Pause Quantum Register
+AT91C_EMAC_MAN            EQU (0xFFFDC034) ;- (EMAC) PHY Maintenance Register
+AT91C_EMAC_FTO            EQU (0xFFFDC040) ;- (EMAC) Frames Transmitted OK Register
+AT91C_EMAC_REV            EQU (0xFFFDC0FC) ;- (EMAC) Revision Register
+AT91C_EMAC_IMR            EQU (0xFFFDC030) ;- (EMAC) Interrupt Mask Register
+AT91C_EMAC_SCF            EQU (0xFFFDC044) ;- (EMAC) Single Collision Frame Register
+AT91C_EMAC_PFR            EQU (0xFFFDC03C) ;- (EMAC) Pause Frames received Register
+AT91C_EMAC_MCF            EQU (0xFFFDC048) ;- (EMAC) Multiple Collision Frame Register
+AT91C_EMAC_NSR            EQU (0xFFFDC008) ;- (EMAC) Network Status Register
+AT91C_EMAC_SA2L           EQU (0xFFFDC0A0) ;- (EMAC) Specific Address 2 Bottom, First 4 bytes
+AT91C_EMAC_FRO            EQU (0xFFFDC04C) ;- (EMAC) Frames Received OK Register
+AT91C_EMAC_IER            EQU (0xFFFDC028) ;- (EMAC) Interrupt Enable Register
+AT91C_EMAC_SA1H           EQU (0xFFFDC09C) ;- (EMAC) Specific Address 1 Top, Last 2 bytes
+AT91C_EMAC_CSE            EQU (0xFFFDC068) ;- (EMAC) Carrier Sense Error Register
+AT91C_EMAC_SA3H           EQU (0xFFFDC0AC) ;- (EMAC) Specific Address 3 Top, Last 2 bytes
+AT91C_EMAC_RRE            EQU (0xFFFDC06C) ;- (EMAC) Receive Ressource Error Register
+AT91C_EMAC_STE            EQU (0xFFFDC084) ;- (EMAC) SQE Test Error Register
+;- ========== Register definition for PDC_ADC peripheral ========== 
+AT91C_ADC_PTSR            EQU (0xFFFD8124) ;- (PDC_ADC) PDC Transfer Status Register
+AT91C_ADC_PTCR            EQU (0xFFFD8120) ;- (PDC_ADC) PDC Transfer Control Register
+AT91C_ADC_TNPR            EQU (0xFFFD8118) ;- (PDC_ADC) Transmit Next Pointer Register
+AT91C_ADC_TNCR            EQU (0xFFFD811C) ;- (PDC_ADC) Transmit Next Counter Register
+AT91C_ADC_RNPR            EQU (0xFFFD8110) ;- (PDC_ADC) Receive Next Pointer Register
+AT91C_ADC_RNCR            EQU (0xFFFD8114) ;- (PDC_ADC) Receive Next Counter Register
+AT91C_ADC_RPR             EQU (0xFFFD8100) ;- (PDC_ADC) Receive Pointer Register
+AT91C_ADC_TCR             EQU (0xFFFD810C) ;- (PDC_ADC) Transmit Counter Register
+AT91C_ADC_TPR             EQU (0xFFFD8108) ;- (PDC_ADC) Transmit Pointer Register
+AT91C_ADC_RCR             EQU (0xFFFD8104) ;- (PDC_ADC) Receive Counter Register
+;- ========== Register definition for ADC peripheral ========== 
+AT91C_ADC_CDR2            EQU (0xFFFD8038) ;- (ADC) ADC Channel Data Register 2
+AT91C_ADC_CDR3            EQU (0xFFFD803C) ;- (ADC) ADC Channel Data Register 3
+AT91C_ADC_CDR0            EQU (0xFFFD8030) ;- (ADC) ADC Channel Data Register 0
+AT91C_ADC_CDR5            EQU (0xFFFD8044) ;- (ADC) ADC Channel Data Register 5
+AT91C_ADC_CHDR            EQU (0xFFFD8014) ;- (ADC) ADC Channel Disable Register
+AT91C_ADC_SR              EQU (0xFFFD801C) ;- (ADC) ADC Status Register
+AT91C_ADC_CDR4            EQU (0xFFFD8040) ;- (ADC) ADC Channel Data Register 4
+AT91C_ADC_CDR1            EQU (0xFFFD8034) ;- (ADC) ADC Channel Data Register 1
+AT91C_ADC_LCDR            EQU (0xFFFD8020) ;- (ADC) ADC Last Converted Data Register
+AT91C_ADC_IDR             EQU (0xFFFD8028) ;- (ADC) ADC Interrupt Disable Register
+AT91C_ADC_CR              EQU (0xFFFD8000) ;- (ADC) ADC Control Register
+AT91C_ADC_CDR7            EQU (0xFFFD804C) ;- (ADC) ADC Channel Data Register 7
+AT91C_ADC_CDR6            EQU (0xFFFD8048) ;- (ADC) ADC Channel Data Register 6
+AT91C_ADC_IER             EQU (0xFFFD8024) ;- (ADC) ADC Interrupt Enable Register
+AT91C_ADC_CHER            EQU (0xFFFD8010) ;- (ADC) ADC Channel Enable Register
+AT91C_ADC_CHSR            EQU (0xFFFD8018) ;- (ADC) ADC Channel Status Register
+AT91C_ADC_MR              EQU (0xFFFD8004) ;- (ADC) ADC Mode Register
+AT91C_ADC_IMR             EQU (0xFFFD802C) ;- (ADC) ADC Interrupt Mask Register
+
+;- *****************************************************************************
+;-               PIO DEFINITIONS FOR AT91SAM7X256
+;- *****************************************************************************
+AT91C_PIO_PA0             EQU (1:SHL:0) ;- Pin Controlled by PA0
+AT91C_PA0_RXD0            EQU (AT91C_PIO_PA0) ;-  USART 0 Receive Data
+AT91C_PIO_PA1             EQU (1:SHL:1) ;- Pin Controlled by PA1
+AT91C_PA1_TXD0            EQU (AT91C_PIO_PA1) ;-  USART 0 Transmit Data
+AT91C_PIO_PA10            EQU (1:SHL:10) ;- Pin Controlled by PA10
+AT91C_PA10_TWD            EQU (AT91C_PIO_PA10) ;-  TWI Two-wire Serial Data
+AT91C_PIO_PA11            EQU (1:SHL:11) ;- Pin Controlled by PA11
+AT91C_PA11_TWCK           EQU (AT91C_PIO_PA11) ;-  TWI Two-wire Serial Clock
+AT91C_PIO_PA12            EQU (1:SHL:12) ;- Pin Controlled by PA12
+AT91C_PA12_SPI0_NPCS0     EQU (AT91C_PIO_PA12) ;-  SPI 0 Peripheral Chip Select 0
+AT91C_PIO_PA13            EQU (1:SHL:13) ;- Pin Controlled by PA13
+AT91C_PA13_SPI0_NPCS1     EQU (AT91C_PIO_PA13) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PA13_PCK1           EQU (AT91C_PIO_PA13) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PA14            EQU (1:SHL:14) ;- Pin Controlled by PA14
+AT91C_PA14_SPI0_NPCS2     EQU (AT91C_PIO_PA14) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PA14_IRQ1           EQU (AT91C_PIO_PA14) ;-  External Interrupt 1
+AT91C_PIO_PA15            EQU (1:SHL:15) ;- Pin Controlled by PA15
+AT91C_PA15_SPI0_NPCS3     EQU (AT91C_PIO_PA15) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PA15_TCLK2          EQU (AT91C_PIO_PA15) ;-  Timer Counter 2 external clock input
+AT91C_PIO_PA16            EQU (1:SHL:16) ;- Pin Controlled by PA16
+AT91C_PA16_SPI0_MISO      EQU (AT91C_PIO_PA16) ;-  SPI 0 Master In Slave
+AT91C_PIO_PA17            EQU (1:SHL:17) ;- Pin Controlled by PA17
+AT91C_PA17_SPI0_MOSI      EQU (AT91C_PIO_PA17) ;-  SPI 0 Master Out Slave
+AT91C_PIO_PA18            EQU (1:SHL:18) ;- Pin Controlled by PA18
+AT91C_PA18_SPI0_SPCK      EQU (AT91C_PIO_PA18) ;-  SPI 0 Serial Clock
+AT91C_PIO_PA19            EQU (1:SHL:19) ;- Pin Controlled by PA19
+AT91C_PA19_CANRX          EQU (AT91C_PIO_PA19) ;-  CAN Receive
+AT91C_PIO_PA2             EQU (1:SHL:2) ;- Pin Controlled by PA2
+AT91C_PA2_SCK0            EQU (AT91C_PIO_PA2) ;-  USART 0 Serial Clock
+AT91C_PA2_SPI1_NPCS1      EQU (AT91C_PIO_PA2) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PA20            EQU (1:SHL:20) ;- Pin Controlled by PA20
+AT91C_PA20_CANTX          EQU (AT91C_PIO_PA20) ;-  CAN Transmit
+AT91C_PIO_PA21            EQU (1:SHL:21) ;- Pin Controlled by PA21
+AT91C_PA21_TF             EQU (AT91C_PIO_PA21) ;-  SSC Transmit Frame Sync
+AT91C_PA21_SPI1_NPCS0     EQU (AT91C_PIO_PA21) ;-  SPI 1 Peripheral Chip Select 0
+AT91C_PIO_PA22            EQU (1:SHL:22) ;- Pin Controlled by PA22
+AT91C_PA22_TK             EQU (AT91C_PIO_PA22) ;-  SSC Transmit Clock
+AT91C_PA22_SPI1_SPCK      EQU (AT91C_PIO_PA22) ;-  SPI 1 Serial Clock
+AT91C_PIO_PA23            EQU (1:SHL:23) ;- Pin Controlled by PA23
+AT91C_PA23_TD             EQU (AT91C_PIO_PA23) ;-  SSC Transmit data
+AT91C_PA23_SPI1_MOSI      EQU (AT91C_PIO_PA23) ;-  SPI 1 Master Out Slave
+AT91C_PIO_PA24            EQU (1:SHL:24) ;- Pin Controlled by PA24
+AT91C_PA24_RD             EQU (AT91C_PIO_PA24) ;-  SSC Receive Data
+AT91C_PA24_SPI1_MISO      EQU (AT91C_PIO_PA24) ;-  SPI 1 Master In Slave
+AT91C_PIO_PA25            EQU (1:SHL:25) ;- Pin Controlled by PA25
+AT91C_PA25_RK             EQU (AT91C_PIO_PA25) ;-  SSC Receive Clock
+AT91C_PA25_SPI1_NPCS1     EQU (AT91C_PIO_PA25) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PA26            EQU (1:SHL:26) ;- Pin Controlled by PA26
+AT91C_PA26_RF             EQU (AT91C_PIO_PA26) ;-  SSC Receive Frame Sync
+AT91C_PA26_SPI1_NPCS2     EQU (AT91C_PIO_PA26) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PA27            EQU (1:SHL:27) ;- Pin Controlled by PA27
+AT91C_PA27_DRXD           EQU (AT91C_PIO_PA27) ;-  DBGU Debug Receive Data
+AT91C_PA27_PCK3           EQU (AT91C_PIO_PA27) ;-  PMC Programmable Clock Output 3
+AT91C_PIO_PA28            EQU (1:SHL:28) ;- Pin Controlled by PA28
+AT91C_PA28_DTXD           EQU (AT91C_PIO_PA28) ;-  DBGU Debug Transmit Data
+AT91C_PIO_PA29            EQU (1:SHL:29) ;- Pin Controlled by PA29
+AT91C_PA29_FIQ            EQU (AT91C_PIO_PA29) ;-  AIC Fast Interrupt Input
+AT91C_PA29_SPI1_NPCS3     EQU (AT91C_PIO_PA29) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PA3             EQU (1:SHL:3) ;- Pin Controlled by PA3
+AT91C_PA3_RTS0            EQU (AT91C_PIO_PA3) ;-  USART 0 Ready To Send
+AT91C_PA3_SPI1_NPCS2      EQU (AT91C_PIO_PA3) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PA30            EQU (1:SHL:30) ;- Pin Controlled by PA30
+AT91C_PA30_IRQ0           EQU (AT91C_PIO_PA30) ;-  External Interrupt 0
+AT91C_PA30_PCK2           EQU (AT91C_PIO_PA30) ;-  PMC Programmable Clock Output 2
+AT91C_PIO_PA4             EQU (1:SHL:4) ;- Pin Controlled by PA4
+AT91C_PA4_CTS0            EQU (AT91C_PIO_PA4) ;-  USART 0 Clear To Send
+AT91C_PA4_SPI1_NPCS3      EQU (AT91C_PIO_PA4) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PA5             EQU (1:SHL:5) ;- Pin Controlled by PA5
+AT91C_PA5_RXD1            EQU (AT91C_PIO_PA5) ;-  USART 1 Receive Data
+AT91C_PIO_PA6             EQU (1:SHL:6) ;- Pin Controlled by PA6
+AT91C_PA6_TXD1            EQU (AT91C_PIO_PA6) ;-  USART 1 Transmit Data
+AT91C_PIO_PA7             EQU (1:SHL:7) ;- Pin Controlled by PA7
+AT91C_PA7_SCK1            EQU (AT91C_PIO_PA7) ;-  USART 1 Serial Clock
+AT91C_PA7_SPI0_NPCS1      EQU (AT91C_PIO_PA7) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PIO_PA8             EQU (1:SHL:8) ;- Pin Controlled by PA8
+AT91C_PA8_RTS1            EQU (AT91C_PIO_PA8) ;-  USART 1 Ready To Send
+AT91C_PA8_SPI0_NPCS2      EQU (AT91C_PIO_PA8) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PIO_PA9             EQU (1:SHL:9) ;- Pin Controlled by PA9
+AT91C_PA9_CTS1            EQU (AT91C_PIO_PA9) ;-  USART 1 Clear To Send
+AT91C_PA9_SPI0_NPCS3      EQU (AT91C_PIO_PA9) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PIO_PB0             EQU (1:SHL:0) ;- Pin Controlled by PB0
+AT91C_PB0_ETXCK_EREFCK    EQU (AT91C_PIO_PB0) ;-  Ethernet MAC Transmit Clock/Reference Clock
+AT91C_PB0_PCK0            EQU (AT91C_PIO_PB0) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PB1             EQU (1:SHL:1) ;- Pin Controlled by PB1
+AT91C_PB1_ETXEN           EQU (AT91C_PIO_PB1) ;-  Ethernet MAC Transmit Enable
+AT91C_PIO_PB10            EQU (1:SHL:10) ;- Pin Controlled by PB10
+AT91C_PB10_ETX2           EQU (AT91C_PIO_PB10) ;-  Ethernet MAC Transmit Data 2
+AT91C_PB10_SPI1_NPCS1     EQU (AT91C_PIO_PB10) ;-  SPI 1 Peripheral Chip Select 1
+AT91C_PIO_PB11            EQU (1:SHL:11) ;- Pin Controlled by PB11
+AT91C_PB11_ETX3           EQU (AT91C_PIO_PB11) ;-  Ethernet MAC Transmit Data 3
+AT91C_PB11_SPI1_NPCS2     EQU (AT91C_PIO_PB11) ;-  SPI 1 Peripheral Chip Select 2
+AT91C_PIO_PB12            EQU (1:SHL:12) ;- Pin Controlled by PB12
+AT91C_PB12_ETXER          EQU (AT91C_PIO_PB12) ;-  Ethernet MAC Transmikt Coding Error
+AT91C_PB12_TCLK0          EQU (AT91C_PIO_PB12) ;-  Timer Counter 0 external clock input
+AT91C_PIO_PB13            EQU (1:SHL:13) ;- Pin Controlled by PB13
+AT91C_PB13_ERX2           EQU (AT91C_PIO_PB13) ;-  Ethernet MAC Receive Data 2
+AT91C_PB13_SPI0_NPCS1     EQU (AT91C_PIO_PB13) ;-  SPI 0 Peripheral Chip Select 1
+AT91C_PIO_PB14            EQU (1:SHL:14) ;- Pin Controlled by PB14
+AT91C_PB14_ERX3           EQU (AT91C_PIO_PB14) ;-  Ethernet MAC Receive Data 3
+AT91C_PB14_SPI0_NPCS2     EQU (AT91C_PIO_PB14) ;-  SPI 0 Peripheral Chip Select 2
+AT91C_PIO_PB15            EQU (1:SHL:15) ;- Pin Controlled by PB15
+AT91C_PB15_ERXDV_ECRSDV   EQU (AT91C_PIO_PB15) ;-  Ethernet MAC Receive Data Valid
+AT91C_PIO_PB16            EQU (1:SHL:16) ;- Pin Controlled by PB16
+AT91C_PB16_ECOL           EQU (AT91C_PIO_PB16) ;-  Ethernet MAC Collision Detected
+AT91C_PB16_SPI1_NPCS3     EQU (AT91C_PIO_PB16) ;-  SPI 1 Peripheral Chip Select 3
+AT91C_PIO_PB17            EQU (1:SHL:17) ;- Pin Controlled by PB17
+AT91C_PB17_ERXCK          EQU (AT91C_PIO_PB17) ;-  Ethernet MAC Receive Clock
+AT91C_PB17_SPI0_NPCS3     EQU (AT91C_PIO_PB17) ;-  SPI 0 Peripheral Chip Select 3
+AT91C_PIO_PB18            EQU (1:SHL:18) ;- Pin Controlled by PB18
+AT91C_PB18_EF100          EQU (AT91C_PIO_PB18) ;-  Ethernet MAC Force 100 Mbits/sec
+AT91C_PB18_ADTRG          EQU (AT91C_PIO_PB18) ;-  ADC External Trigger
+AT91C_PIO_PB19            EQU (1:SHL:19) ;- Pin Controlled by PB19
+AT91C_PB19_PWM0           EQU (AT91C_PIO_PB19) ;-  PWM Channel 0
+AT91C_PB19_TCLK1          EQU (AT91C_PIO_PB19) ;-  Timer Counter 1 external clock input
+AT91C_PIO_PB2             EQU (1:SHL:2) ;- Pin Controlled by PB2
+AT91C_PB2_ETX0            EQU (AT91C_PIO_PB2) ;-  Ethernet MAC Transmit Data 0
+AT91C_PIO_PB20            EQU (1:SHL:20) ;- Pin Controlled by PB20
+AT91C_PB20_PWM1           EQU (AT91C_PIO_PB20) ;-  PWM Channel 1
+AT91C_PB20_PCK0           EQU (AT91C_PIO_PB20) ;-  PMC Programmable Clock Output 0
+AT91C_PIO_PB21            EQU (1:SHL:21) ;- Pin Controlled by PB21
+AT91C_PB21_PWM2           EQU (AT91C_PIO_PB21) ;-  PWM Channel 2
+AT91C_PB21_PCK1           EQU (AT91C_PIO_PB21) ;-  PMC Programmable Clock Output 1
+AT91C_PIO_PB22            EQU (1:SHL:22) ;- Pin Controlled by PB22
+AT91C_PB22_PWM3           EQU (AT91C_PIO_PB22) ;-  PWM Channel 3
+AT91C_PB22_PCK2           EQU (AT91C_PIO_PB22) ;-  PMC Programmable Clock Output 2
+AT91C_PIO_PB23            EQU (1:SHL:23) ;- Pin Controlled by PB23
+AT91C_PB23_TIOA0          EQU (AT91C_PIO_PB23) ;-  Timer Counter 0 Multipurpose Timer I/O Pin A
+AT91C_PB23_DCD1           EQU (AT91C_PIO_PB23) ;-  USART 1 Data Carrier Detect
+AT91C_PIO_PB24            EQU (1:SHL:24) ;- Pin Controlled by PB24
+AT91C_PB24_TIOB0          EQU (AT91C_PIO_PB24) ;-  Timer Counter 0 Multipurpose Timer I/O Pin B
+AT91C_PB24_DSR1           EQU (AT91C_PIO_PB24) ;-  USART 1 Data Set ready
+AT91C_PIO_PB25            EQU (1:SHL:25) ;- Pin Controlled by PB25
+AT91C_PB25_TIOA1          EQU (AT91C_PIO_PB25) ;-  Timer Counter 1 Multipurpose Timer I/O Pin A
+AT91C_PB25_DTR1           EQU (AT91C_PIO_PB25) ;-  USART 1 Data Terminal ready
+AT91C_PIO_PB26            EQU (1:SHL:26) ;- Pin Controlled by PB26
+AT91C_PB26_TIOB1          EQU (AT91C_PIO_PB26) ;-  Timer Counter 1 Multipurpose Timer I/O Pin B
+AT91C_PB26_RI1            EQU (AT91C_PIO_PB26) ;-  USART 1 Ring Indicator
+AT91C_PIO_PB27            EQU (1:SHL:27) ;- Pin Controlled by PB27
+AT91C_PB27_TIOA2          EQU (AT91C_PIO_PB27) ;-  Timer Counter 2 Multipurpose Timer I/O Pin A
+AT91C_PB27_PWM0           EQU (AT91C_PIO_PB27) ;-  PWM Channel 0
+AT91C_PIO_PB28            EQU (1:SHL:28) ;- Pin Controlled by PB28
+AT91C_PB28_TIOB2          EQU (AT91C_PIO_PB28) ;-  Timer Counter 2 Multipurpose Timer I/O Pin B
+AT91C_PB28_PWM1           EQU (AT91C_PIO_PB28) ;-  PWM Channel 1
+AT91C_PIO_PB29            EQU (1:SHL:29) ;- Pin Controlled by PB29
+AT91C_PB29_PCK1           EQU (AT91C_PIO_PB29) ;-  PMC Programmable Clock Output 1
+AT91C_PB29_PWM2           EQU (AT91C_PIO_PB29) ;-  PWM Channel 2
+AT91C_PIO_PB3             EQU (1:SHL:3) ;- Pin Controlled by PB3
+AT91C_PB3_ETX1            EQU (AT91C_PIO_PB3) ;-  Ethernet MAC Transmit Data 1
+AT91C_PIO_PB30            EQU (1:SHL:30) ;- Pin Controlled by PB30
+AT91C_PB30_PCK2           EQU (AT91C_PIO_PB30) ;-  PMC Programmable Clock Output 2
+AT91C_PB30_PWM3           EQU (AT91C_PIO_PB30) ;-  PWM Channel 3
+AT91C_PIO_PB4             EQU (1:SHL:4) ;- Pin Controlled by PB4
+AT91C_PB4_ECRS            EQU (AT91C_PIO_PB4) ;-  Ethernet MAC Carrier Sense/Carrier Sense and Data Valid
+AT91C_PIO_PB5             EQU (1:SHL:5) ;- Pin Controlled by PB5
+AT91C_PB5_ERX0            EQU (AT91C_PIO_PB5) ;-  Ethernet MAC Receive Data 0
+AT91C_PIO_PB6             EQU (1:SHL:6) ;- Pin Controlled by PB6
+AT91C_PB6_ERX1            EQU (AT91C_PIO_PB6) ;-  Ethernet MAC Receive Data 1
+AT91C_PIO_PB7             EQU (1:SHL:7) ;- Pin Controlled by PB7
+AT91C_PB7_ERXER           EQU (AT91C_PIO_PB7) ;-  Ethernet MAC Receive Error
+AT91C_PIO_PB8             EQU (1:SHL:8) ;- Pin Controlled by PB8
+AT91C_PB8_EMDC            EQU (AT91C_PIO_PB8) ;-  Ethernet MAC Management Data Clock
+AT91C_PIO_PB9             EQU (1:SHL:9) ;- Pin Controlled by PB9
+AT91C_PB9_EMDIO           EQU (AT91C_PIO_PB9) ;-  Ethernet MAC Management Data Input/Output
+
+;- *****************************************************************************
+;-               PERIPHERAL ID DEFINITIONS FOR AT91SAM7X256
+;- *****************************************************************************
+AT91C_ID_FIQ              EQU ( 0) ;- Advanced Interrupt Controller (FIQ)
+AT91C_ID_SYS              EQU ( 1) ;- System Peripheral
+AT91C_ID_PIOA             EQU ( 2) ;- Parallel IO Controller A
+AT91C_ID_PIOB             EQU ( 3) ;- Parallel IO Controller B
+AT91C_ID_SPI0             EQU ( 4) ;- Serial Peripheral Interface 0
+AT91C_ID_SPI1             EQU ( 5) ;- Serial Peripheral Interface 1
+AT91C_ID_US0              EQU ( 6) ;- USART 0
+AT91C_ID_US1              EQU ( 7) ;- USART 1
+AT91C_ID_SSC              EQU ( 8) ;- Serial Synchronous Controller
+AT91C_ID_TWI              EQU ( 9) ;- Two-Wire Interface
+AT91C_ID_PWMC             EQU (10) ;- PWM Controller
+AT91C_ID_UDP              EQU (11) ;- USB Device Port
+AT91C_ID_TC0              EQU (12) ;- Timer Counter 0
+AT91C_ID_TC1              EQU (13) ;- Timer Counter 1
+AT91C_ID_TC2              EQU (14) ;- Timer Counter 2
+AT91C_ID_CAN              EQU (15) ;- Control Area Network Controller
+AT91C_ID_EMAC             EQU (16) ;- Ethernet MAC
+AT91C_ID_ADC              EQU (17) ;- Analog-to-Digital Converter
+AT91C_ID_18_Reserved      EQU (18) ;- Reserved
+AT91C_ID_19_Reserved      EQU (19) ;- Reserved
+AT91C_ID_20_Reserved      EQU (20) ;- Reserved
+AT91C_ID_21_Reserved      EQU (21) ;- Reserved
+AT91C_ID_22_Reserved      EQU (22) ;- Reserved
+AT91C_ID_23_Reserved      EQU (23) ;- Reserved
+AT91C_ID_24_Reserved      EQU (24) ;- Reserved
+AT91C_ID_25_Reserved      EQU (25) ;- Reserved
+AT91C_ID_26_Reserved      EQU (26) ;- Reserved
+AT91C_ID_27_Reserved      EQU (27) ;- Reserved
+AT91C_ID_28_Reserved      EQU (28) ;- Reserved
+AT91C_ID_29_Reserved      EQU (29) ;- Reserved
+AT91C_ID_IRQ0             EQU (30) ;- Advanced Interrupt Controller (IRQ0)
+AT91C_ID_IRQ1             EQU (31) ;- Advanced Interrupt Controller (IRQ1)
+AT91C_ALL_INT             EQU (0xC003FFFF) ;- ALL VALID INTERRUPTS
+
+;- *****************************************************************************
+;-               BASE ADDRESS DEFINITIONS FOR AT91SAM7X256
+;- *****************************************************************************
+AT91C_BASE_SYS            EQU (0xFFFFF000) ;- (SYS) Base Address
+AT91C_BASE_AIC            EQU (0xFFFFF000) ;- (AIC) Base Address
+AT91C_BASE_PDC_DBGU       EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address
+AT91C_BASE_DBGU           EQU (0xFFFFF200) ;- (DBGU) Base Address
+AT91C_BASE_PIOA           EQU (0xFFFFF400) ;- (PIOA) Base Address
+AT91C_BASE_PIOB           EQU (0xFFFFF600) ;- (PIOB) Base Address
+AT91C_BASE_CKGR           EQU (0xFFFFFC20) ;- (CKGR) Base Address
+AT91C_BASE_PMC            EQU (0xFFFFFC00) ;- (PMC) Base Address
+AT91C_BASE_RSTC           EQU (0xFFFFFD00) ;- (RSTC) Base Address
+AT91C_BASE_RTTC           EQU (0xFFFFFD20) ;- (RTTC) Base Address
+AT91C_BASE_PITC           EQU (0xFFFFFD30) ;- (PITC) Base Address
+AT91C_BASE_WDTC           EQU (0xFFFFFD40) ;- (WDTC) Base Address
+AT91C_BASE_VREG           EQU (0xFFFFFD60) ;- (VREG) Base Address
+AT91C_BASE_MC             EQU (0xFFFFFF00) ;- (MC) Base Address
+AT91C_BASE_PDC_SPI1       EQU (0xFFFE4100) ;- (PDC_SPI1) Base Address
+AT91C_BASE_SPI1           EQU (0xFFFE4000) ;- (SPI1) Base Address
+AT91C_BASE_PDC_SPI0       EQU (0xFFFE0100) ;- (PDC_SPI0) Base Address
+AT91C_BASE_SPI0           EQU (0xFFFE0000) ;- (SPI0) Base Address
+AT91C_BASE_PDC_US1        EQU (0xFFFC4100) ;- (PDC_US1) Base Address
+AT91C_BASE_US1            EQU (0xFFFC4000) ;- (US1) Base Address
+AT91C_BASE_PDC_US0        EQU (0xFFFC0100) ;- (PDC_US0) Base Address
+AT91C_BASE_US0            EQU (0xFFFC0000) ;- (US0) Base Address
+AT91C_BASE_PDC_SSC        EQU (0xFFFD4100) ;- (PDC_SSC) Base Address
+AT91C_BASE_SSC            EQU (0xFFFD4000) ;- (SSC) Base Address
+AT91C_BASE_TWI            EQU (0xFFFB8000) ;- (TWI) Base Address
+AT91C_BASE_PWMC_CH3       EQU (0xFFFCC260) ;- (PWMC_CH3) Base Address
+AT91C_BASE_PWMC_CH2       EQU (0xFFFCC240) ;- (PWMC_CH2) Base Address
+AT91C_BASE_PWMC_CH1       EQU (0xFFFCC220) ;- (PWMC_CH1) Base Address
+AT91C_BASE_PWMC_CH0       EQU (0xFFFCC200) ;- (PWMC_CH0) Base Address
+AT91C_BASE_PWMC           EQU (0xFFFCC000) ;- (PWMC) Base Address
+AT91C_BASE_UDP            EQU (0xFFFB0000) ;- (UDP) Base Address
+AT91C_BASE_TC0            EQU (0xFFFA0000) ;- (TC0) Base Address
+AT91C_BASE_TC1            EQU (0xFFFA0040) ;- (TC1) Base Address
+AT91C_BASE_TC2            EQU (0xFFFA0080) ;- (TC2) Base Address
+AT91C_BASE_TCB            EQU (0xFFFA0000) ;- (TCB) Base Address
+AT91C_BASE_CAN_MB0        EQU (0xFFFD0200) ;- (CAN_MB0) Base Address
+AT91C_BASE_CAN_MB1        EQU (0xFFFD0220) ;- (CAN_MB1) Base Address
+AT91C_BASE_CAN_MB2        EQU (0xFFFD0240) ;- (CAN_MB2) Base Address
+AT91C_BASE_CAN_MB3        EQU (0xFFFD0260) ;- (CAN_MB3) Base Address
+AT91C_BASE_CAN_MB4        EQU (0xFFFD0280) ;- (CAN_MB4) Base Address
+AT91C_BASE_CAN_MB5        EQU (0xFFFD02A0) ;- (CAN_MB5) Base Address
+AT91C_BASE_CAN_MB6        EQU (0xFFFD02C0) ;- (CAN_MB6) Base Address
+AT91C_BASE_CAN_MB7        EQU (0xFFFD02E0) ;- (CAN_MB7) Base Address
+AT91C_BASE_CAN            EQU (0xFFFD0000) ;- (CAN) Base Address
+AT91C_BASE_EMAC           EQU (0xFFFDC000) ;- (EMAC) Base Address
+AT91C_BASE_PDC_ADC        EQU (0xFFFD8100) ;- (PDC_ADC) Base Address
+AT91C_BASE_ADC            EQU (0xFFFD8000) ;- (ADC) Base Address
+
+;- *****************************************************************************
+;-               MEMORY MAPPING DEFINITIONS FOR AT91SAM7X256
+;- *****************************************************************************
+;- ISRAM
+AT91C_ISRAM               EQU (0x00200000) ;- Internal SRAM base address
+AT91C_ISRAM_SIZE          EQU (0x00010000) ;- Internal SRAM size in byte (64 Kbytes)
+;- IFLASH
+AT91C_IFLASH              EQU (0x00100000) ;- Internal FLASH base address
+AT91C_IFLASH_SIZE         EQU (0x00040000) ;- Internal FLASH size in byte (256 Kbytes)
+AT91C_IFLASH_PAGE_SIZE    EQU (256) ;- Internal FLASH Page Size: 256 bytes
+AT91C_IFLASH_LOCK_REGION_SIZE EQU (16384) ;- Internal FLASH Lock Region Size: 16 Kbytes
+AT91C_IFLASH_NB_OF_PAGES  EQU (1024) ;- Internal FLASH Number of Pages: 1024 bytes
+AT91C_IFLASH_NB_OF_LOCK_BITS EQU (16) ;- Internal FLASH Number of Lock Bits: 16 bytes
+
+
+	END