tpy-lang 0.3.0.dev0__py3-none-any.whl

tpyc/_data/runtime/cpp/third_party/pcre2/src/sljit/sljitConfigInternal.h

@@ -0,0 +1,907 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef SLJIT_CONFIG_INTERNAL_H_
+#define SLJIT_CONFIG_INTERNAL_H_
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+	|| (defined SLJIT_DEBUG && SLJIT_DEBUG && (!defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE)))
+#include <stdio.h>
+#endif
+
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG \
+	&& (!defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE) || !defined(SLJIT_HALT_PROCESS)))
+#include <stdlib.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+   SLJIT defines the following architecture dependent types and macros:
+
+   Types:
+     sljit_s8, sljit_u8   : signed and unsigned 8 bit integer type
+     sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type
+     sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type
+     sljit_sw, sljit_uw   : signed and unsigned machine word, enough to store a pointer
+     sljit_sp, sljit_up   : signed and unsigned pointer value (usually the same as
+                            sljit_uw, but some 64 bit ABIs may use 32 bit pointers)
+     sljit_f32            : 32 bit single precision floating point value
+     sljit_f64            : 64 bit double precision floating point value
+
+   Macros for feature detection (boolean):
+     SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
+     SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
+     SLJIT_LITTLE_ENDIAN : little endian architecture
+     SLJIT_BIG_ENDIAN : big endian architecture
+     SLJIT_UNALIGNED : unaligned memory accesses for non-fpu operations are supported
+     SLJIT_FPU_UNALIGNED : unaligned memory accesses for fpu operations are supported
+     SLJIT_MASKED_SHIFT : all word shifts are always masked
+     SLJIT_MASKED_SHIFT32 : all 32 bit shifts are always masked
+     SLJIT_INDIRECT_CALL : see SLJIT_FUNC_ADDR() for more information
+
+   Constants:
+     SLJIT_NUMBER_OF_REGISTERS : number of available registers
+     SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers
+     SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers
+     SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers
+     SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers
+     SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers
+     SLJIT_NUMBER_OF_TEMPORARY_REGISTERS : number of available temporary registers
+     SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS : number of available temporary floating point registers
+     SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
+     SLJIT_F32_SHIFT : the shift required to apply when accessing
+                       a single precision floating point array by index
+     SLJIT_F64_SHIFT : the shift required to apply when accessing
+                       a double precision floating point array by index
+     SLJIT_PREF_SHIFT_REG : x86 systems prefers ecx for shifting by register
+                            the scratch register index of ecx is stored in this variable
+     SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
+     SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
+     SLJIT_CONV_MAX_FLOAT : result when a floating point value is converted to integer
+                            and the floating point value is higher than the maximum integer value
+                            (possible values: SLJIT_CONV_RESULT_MAX_INT or SLJIT_CONV_RESULT_MIN_INT)
+     SLJIT_CONV_MIN_FLOAT : result when a floating point value is converted to integer
+                            and the floating point value is lower than the minimum integer value
+                            (possible values: SLJIT_CONV_RESULT_MAX_INT or SLJIT_CONV_RESULT_MIN_INT)
+     SLJIT_CONV_NAN_FLOAT : result when a NaN floating point value is converted to integer
+                            (possible values: SLJIT_CONV_RESULT_MAX_INT, SLJIT_CONV_RESULT_MIN_INT,
+                            or SLJIT_CONV_RESULT_ZERO)
+
+   Other macros:
+     SLJIT_TMP_R0 .. R9 : accessing temporary registers
+     SLJIT_TMP_R(i) : accessing temporary registers
+     SLJIT_TMP_FR0 .. FR9 : accessing temporary floating point registers
+     SLJIT_TMP_FR(i) : accessing temporary floating point registers
+     SLJIT_TMP_DEST_REG : a temporary register for results
+     SLJIT_TMP_MEM_REG : a temporary base register for accessing memory
+                         (can be the same as SLJIT_TMP_DEST_REG)
+     SLJIT_TMP_DEST_FREG : a temporary register for float results
+     SLJIT_FUNC : calling convention attribute for both calling JIT from C and C calling back from JIT
+     SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (platform independent helper)
+     SLJIT_F64_SECOND(reg) : provides the register index of the second 32 bit part of a 64 bit
+                             floating point register when SLJIT_HAS_F64_AS_F32_PAIR returns non-zero
+*/
+
+/***********************************************************/
+/* Intel Control-flow Enforcement Technology (CET) spport. */
+/***********************************************************/
+
+#ifdef SLJIT_CONFIG_X86
+
+#if defined(__CET__) && !(defined SLJIT_CONFIG_X86_CET && SLJIT_CONFIG_X86_CET)
+#define SLJIT_CONFIG_X86_CET 1
+#endif
+
+#if (defined SLJIT_CONFIG_X86_CET && SLJIT_CONFIG_X86_CET) && defined(__GNUC__)
+#include <x86intrin.h>
+#endif
+
+#endif /* SLJIT_CONFIG_X86 */
+
+/**********************************/
+/* External function definitions. */
+/**********************************/
+
+/* General macros:
+   Note: SLJIT is designed to be independent from them as possible.
+
+   In release mode (SLJIT_DEBUG is not defined) only the following
+   external functions are needed:
+*/
+
+#ifndef SLJIT_MALLOC
+#define SLJIT_MALLOC(size, allocator_data) (malloc(size))
+#endif
+
+#ifndef SLJIT_FREE
+#define SLJIT_FREE(ptr, allocator_data) (free(ptr))
+#endif
+
+#ifndef SLJIT_MEMCPY
+#define SLJIT_MEMCPY(dest, src, len) (memcpy(dest, src, len))
+#endif
+
+#ifndef SLJIT_MEMMOVE
+#define SLJIT_MEMMOVE(dest, src, len) (memmove(dest, src, len))
+#endif
+
+#ifndef SLJIT_ZEROMEM
+#define SLJIT_ZEROMEM(dest, len) (memset(dest, 0, len))
+#endif
+
+/***************************/
+/* Compiler helper macros. */
+/***************************/
+
+#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
+
+#if defined(__GNUC__) && (__GNUC__ >= 3)
+#define SLJIT_LIKELY(x)		__builtin_expect((x), 1)
+#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0)
+#else
+#define SLJIT_LIKELY(x)		(x)
+#define SLJIT_UNLIKELY(x)	(x)
+#endif
+
+#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
+
+#ifndef SLJIT_INLINE
+/* Inline functions. Some old compilers do not support them. */
+#ifdef __SUNPRO_C
+#if __SUNPRO_C < 0x560
+#define SLJIT_INLINE
+#else
+#define SLJIT_INLINE inline
+#endif /* __SUNPRO_C */
+#else
+#define SLJIT_INLINE __inline
+#endif
+#endif /* !SLJIT_INLINE */
+
+#ifndef SLJIT_NOINLINE
+/* Not inline functions. */
+#if defined(__GNUC__)
+#define SLJIT_NOINLINE __attribute__ ((noinline))
+#else
+#define SLJIT_NOINLINE
+#endif
+#endif /* !SLJIT_INLINE */
+
+#ifndef SLJIT_UNUSED_ARG
+/* Unused arguments. */
+#define SLJIT_UNUSED_ARG(arg) (void)arg
+#endif
+
+/*********************************/
+/* Type of public API functions. */
+/*********************************/
+
+#ifndef SLJIT_API_FUNC_ATTRIBUTE
+#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
+/* Static ABI functions. For all-in-one programs. */
+
+#if defined(__GNUC__)
+/* Disable unused warnings in gcc. */
+#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused))
+#else
+#define SLJIT_API_FUNC_ATTRIBUTE static
+#endif
+
+#else
+#define SLJIT_API_FUNC_ATTRIBUTE
+#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
+#endif /* defined SLJIT_API_FUNC_ATTRIBUTE */
+
+/****************************/
+/* Instruction cache flush. */
+/****************************/
+
+#ifdef __APPLE__
+#include <AvailabilityMacros.h>
+#endif
+
+/*
+ * TODO:
+ *
+ * clang >= 15 could be safe to enable below
+ * older versions are known to abort in some targets
+ * https://github.com/PhilipHazel/pcre2/issues/92
+ *
+ * beware some vendors (ex: Microsoft, Apple) are known to have
+ * removed the code to support this builtin even if the call for
+ * __has_builtin reports it is available.
+ *
+ * make sure linking doesn't fail because __clear_cache() is
+ * missing before changing it or add an exception so that the
+ * system provided method that should be defined below is used
+ * instead.
+ */
+#if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin)
+#if __has_builtin(__builtin___clear_cache) && !defined(__clang__)
+
+/*
+ * https://gcc.gnu.org/bugzilla//show_bug.cgi?id=91248
+ * https://gcc.gnu.org/bugzilla//show_bug.cgi?id=93811
+ * gcc's clear_cache builtin for power is broken
+ */
+#if !defined(SLJIT_CONFIG_PPC)
+#define SLJIT_CACHE_FLUSH(from, to) \
+	__builtin___clear_cache((char*)(from), (char*)(to))
+#endif
+
+#endif /* gcc >= 10 */
+#endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */
+
+#ifndef SLJIT_CACHE_FLUSH
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) \
+	|| (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X)
+
+/* Not required to implement on archs with unified caches. */
+#define SLJIT_CACHE_FLUSH(from, to)
+
+#elif defined(__APPLE__) && MAC_OS_X_VERSION_MIN_REQUIRED >= 1050
+
+/* Supported by all macs since Mac OS 10.5.
+   However, it does not work on non-jailbroken iOS devices,
+   although the compilation is successful. */
+#include <libkern/OSCacheControl.h>
+#define SLJIT_CACHE_FLUSH(from, to) \
+	sys_icache_invalidate((void*)(from), (size_t)((char*)(to) - (char*)(from)))
+
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	ppc_cache_flush((from), (to))
+#define SLJIT_CACHE_FLUSH_OWN_IMPL 1
+
+#elif defined(_WIN32)
+
+#define SLJIT_CACHE_FLUSH(from, to) \
+	FlushInstructionCache(GetCurrentProcess(), (void*)(from), (char*)(to) - (char*)(from))
+
+#elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) || defined(__clang__)
+
+#define SLJIT_CACHE_FLUSH(from, to) \
+	__builtin___clear_cache((char*)(from), (char*)(to))
+
+#elif defined __ANDROID__
+
+/* Android ARMv7 with gcc lacks __clear_cache; use cacheflush instead. */
+#include <sys/cachectl.h>
+#define SLJIT_CACHE_FLUSH(from, to) \
+	cacheflush((long)(from), (long)(to), 0)
+
+#else
+
+/* Call __ARM_NR_cacheflush on ARM-Linux or the corresponding MIPS syscall. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	__clear_cache((char*)(from), (char*)(to))
+
+#endif
+
+#endif /* !SLJIT_CACHE_FLUSH */
+
+/******************************************************/
+/*    Integer and floating point type definitions.    */
+/******************************************************/
+
+/* 8 bit byte type. */
+typedef unsigned char sljit_u8;
+typedef signed char sljit_s8;
+
+/* 16 bit half-word type. */
+typedef unsigned short int sljit_u16;
+typedef signed short int sljit_s16;
+
+/* 32 bit integer type. */
+typedef unsigned int sljit_u32;
+typedef signed int sljit_s32;
+
+/* Machine word type. Enough for storing a pointer.
+     32 bit for 32 bit machines.
+     64 bit for 64 bit machines. */
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+/* Just to have something. */
+#define SLJIT_WORD_SHIFT 0
+typedef unsigned int sljit_uw;
+typedef int sljit_sw;
+#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+	&& !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
+	&& !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	&& !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \
+	&& !(defined SLJIT_CONFIG_RISCV_64 && SLJIT_CONFIG_RISCV_64) \
+	&& !(defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X) \
+	&& !(defined SLJIT_CONFIG_LOONGARCH_64 && SLJIT_CONFIG_LOONGARCH_64)
+#define SLJIT_32BIT_ARCHITECTURE 1
+#define SLJIT_WORD_SHIFT 2
+typedef unsigned int sljit_uw;
+typedef int sljit_sw;
+#else
+#define SLJIT_64BIT_ARCHITECTURE 1
+#define SLJIT_WORD_SHIFT 3
+#ifdef _WIN32
+#ifdef __GNUC__
+/* These types do not require windows.h */
+typedef unsigned long long sljit_uw;
+typedef long long sljit_sw;
+#else
+typedef unsigned __int64 sljit_uw;
+typedef __int64 sljit_sw;
+#endif
+#else /* !_WIN32 */
+typedef unsigned long int sljit_uw;
+typedef long int sljit_sw;
+#endif /* _WIN32 */
+#endif
+
+typedef sljit_sw sljit_sp;
+typedef sljit_uw sljit_up;
+
+/* Floating point types. */
+typedef float sljit_f32;
+typedef double sljit_f64;
+
+/* Shift for pointer sized data. */
+#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
+
+/* Shift for double precision sized data. */
+#define SLJIT_F32_SHIFT 2
+#define SLJIT_F64_SHIFT 3
+
+#define SLJIT_CONV_RESULT_MAX_INT 0
+#define SLJIT_CONV_RESULT_MIN_INT 1
+#define SLJIT_CONV_RESULT_ZERO 2
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#elif (defined SLJIT_CONFIG_ARM && SLJIT_CONFIG_ARM)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_ZERO
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#elif (defined SLJIT_CONFIG_RISCV && SLJIT_CONFIG_RISCV)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#elif (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#elif (defined SLJIT_CONFIG_LOONGARCH && SLJIT_CONFIG_LOONGARCH)
+#define SLJIT_CONV_MAX_FLOAT SLJIT_CONV_RESULT_MAX_INT
+#define SLJIT_CONV_MIN_FLOAT SLJIT_CONV_RESULT_MIN_INT
+#define SLJIT_CONV_NAN_FLOAT SLJIT_CONV_RESULT_ZERO
+#else
+#error "Result for float to integer conversion is not defined"
+#endif
+
+#ifndef SLJIT_W
+
+/* Defining long constants. */
+#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
+#ifdef _WIN64
+#define SLJIT_W(w)	(w##ll)
+#else /* !windows */
+#define SLJIT_W(w)	(w##l)
+#endif /* windows */
+#else /* 32 bit */
+#define SLJIT_W(w)	(w)
+#endif /* unknown */
+
+#endif /* !SLJIT_W */
+
+/*************************/
+/* Endianness detection. */
+/*************************/
+
+#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
+
+/* These macros are mostly useful for the applications. */
+#if (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+#ifdef __LITTLE_ENDIAN__
+#define SLJIT_LITTLE_ENDIAN 1
+#else
+#define SLJIT_BIG_ENDIAN 1
+#endif
+
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+
+#ifdef __MIPSEL__
+#define SLJIT_LITTLE_ENDIAN 1
+#else
+#define SLJIT_BIG_ENDIAN 1
+#endif
+
+#ifndef SLJIT_MIPS_REV
+
+/* Auto detecting mips revision. */
+#if (defined __mips_isa_rev) && (__mips_isa_rev >= 6)
+#define SLJIT_MIPS_REV 6
+#elif defined(__mips_isa_rev) && __mips_isa_rev >= 1
+#define SLJIT_MIPS_REV __mips_isa_rev
+#elif defined(__clang__) \
+	&& (defined(_MIPS_ARCH_OCTEON) || defined(_MIPS_ARCH_P5600))
+/* clang either forgets to define (clang-7) __mips_isa_rev at all
+ * or sets it to zero (clang-8,-9) for -march=octeon (MIPS64 R2+)
+ * and -march=p5600 (MIPS32 R5).
+ * It also sets the __mips macro to 64 or 32 for -mipsN when N <= 5
+ * (should be set to N exactly) so we cannot rely on this too.
+ */
+#define SLJIT_MIPS_REV 1
+#endif
+
+#endif /* !SLJIT_MIPS_REV */
+
+#elif (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X)
+
+#define SLJIT_BIG_ENDIAN 1
+
+#else
+#define SLJIT_LITTLE_ENDIAN 1
+#endif
+
+#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */
+
+/* Sanity check. */
+#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+#error "Exactly one endianness must be selected"
+#endif
+
+#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+#error "Exactly one endianness must be selected"
+#endif
+
+#ifndef SLJIT_UNALIGNED
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) \
+	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
+	|| (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) \
+	|| (defined SLJIT_CONFIG_RISCV && SLJIT_CONFIG_RISCV) \
+	|| (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X) \
+	|| (defined SLJIT_CONFIG_LOONGARCH && SLJIT_CONFIG_LOONGARCH)
+#define SLJIT_UNALIGNED 1
+#endif
+
+#endif /* !SLJIT_UNALIGNED */
+
+#ifndef SLJIT_FPU_UNALIGNED
+
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) \
+	|| (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
+	|| (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) \
+	|| (defined SLJIT_CONFIG_RISCV && SLJIT_CONFIG_RISCV) \
+	|| (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X) \
+	|| (defined SLJIT_CONFIG_LOONGARCH && SLJIT_CONFIG_LOONGARCH)
+#define SLJIT_FPU_UNALIGNED 1
+#endif
+
+#endif /* !SLJIT_FPU_UNALIGNED */
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+/* Auto detect SSE2 support using CPUID.
+   On 64 bit x86 cpus, sse2 must be present. */
+#define SLJIT_DETECT_SSE2 1
+#endif
+
+/*****************************************************************************************/
+/* Calling convention of functions generated by SLJIT or called from the generated code. */
+/*****************************************************************************************/
+
+#ifndef SLJIT_FUNC
+#define SLJIT_FUNC
+#endif /* !SLJIT_FUNC */
+
+#ifndef SLJIT_INDIRECT_CALL
+#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (!defined _CALL_ELF || _CALL_ELF == 1)) \
+	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
+/* It seems certain ppc compilers use an indirect addressing for functions
+   which makes things complicated. */
+#define SLJIT_INDIRECT_CALL 1
+#endif
+#endif /* SLJIT_INDIRECT_CALL */
+
+/* The offset which needs to be subtracted from the return address to
+determine the next executed instruction after return. */
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET
+#define SLJIT_RETURN_ADDRESS_OFFSET 0
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
+
+/***************************************************/
+/* Functions of the built-in executable allocator. */
+/***************************************************/
+
+#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void);
+#define SLJIT_BUILTIN_MALLOC_EXEC(size, exec_allocator_data) sljit_malloc_exec(size)
+#define SLJIT_BUILTIN_FREE_EXEC(ptr, exec_allocator_data) sljit_free_exec(ptr)
+
+#ifndef SLJIT_MALLOC_EXEC
+#define SLJIT_MALLOC_EXEC(size, exec_allocator_data) SLJIT_BUILTIN_MALLOC_EXEC((size), (exec_allocator_data))
+#endif /* SLJIT_MALLOC_EXEC */
+
+#ifndef SLJIT_FREE_EXEC
+#define SLJIT_FREE_EXEC(ptr, exec_allocator_data) SLJIT_BUILTIN_FREE_EXEC((ptr), (exec_allocator_data))
+#endif /* SLJIT_FREE_EXEC */
+
+#if (defined SLJIT_PROT_EXECUTABLE_ALLOCATOR && SLJIT_PROT_EXECUTABLE_ALLOCATOR)
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw sljit_exec_offset(void *code);
+#define SLJIT_EXEC_OFFSET(code) sljit_exec_offset(code)
+#endif /* SLJIT_PROT_EXECUTABLE_ALLOCATOR */
+
+#endif /* SLJIT_EXECUTABLE_ALLOCATOR */
+
+#ifndef SLJIT_EXEC_OFFSET
+#define SLJIT_EXEC_OFFSET(ptr) 0
+#endif
+
+/**********************************************/
+/* Registers and locals offset determination. */
+/**********************************************/
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 1
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 7
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 1
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R0
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R0
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE (8 * SSIZE_OF(sw))
+#define SLJIT_PREF_SHIFT_REG SLJIT_R2
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+
+#define SLJIT_NUMBER_OF_REGISTERS 13
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 2
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 15
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 1
+#ifndef _WIN64
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#else /* _WIN64 */
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 10
+#define SLJIT_LOCALS_OFFSET_BASE (4 * SSIZE_OF(sw))
+#endif /* !_WIN64 */
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R0
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R0
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_PREF_SHIFT_REG SLJIT_R3
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32)
+
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 2
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 14
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 8
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 2
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R1
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R1
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+
+#define SLJIT_NUMBER_OF_REGISTERS 26
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 3
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 30
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 8
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 2
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R0
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R0
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE (2 * (sljit_s32)sizeof(sljit_sw))
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 23
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 3
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 30
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 18
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 2
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R1
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R1
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
+#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * (sljit_s32)sizeof(sljit_sw))
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * (sljit_s32)sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE (3 * (sljit_s32)sizeof(sljit_sw))
+#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
+
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+
+#define SLJIT_NUMBER_OF_REGISTERS 21
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#define SLJIT_LOCALS_OFFSET_BASE (4 * (sljit_s32)sizeof(sljit_sw))
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 13
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 6
+#else
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 29
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 8
+#endif
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 5
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 3
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R1
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R1
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_RISCV && SLJIT_CONFIG_RISCV)
+
+#define SLJIT_NUMBER_OF_REGISTERS 23
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 12
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 5
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 30
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 12
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 2
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R1
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R1
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X)
+
+/*
+ * https://refspecs.linuxbase.org/ELF/zSeries/lzsabi0_zSeries.html#STACKFRAME
+ *
+ * 160
+ *  .. FR6
+ *  .. FR4
+ *  .. FR2
+ * 128 FR0
+ * 120 R15 (used for SP)
+ * 112 R14
+ * 104 R13
+ *  96 R12
+ *  ..
+ *  48 R6
+ *  ..
+ *  16 R2
+ *   8 RESERVED
+ *   0 SP
+ */
+#define SLJIT_S390X_DEFAULT_STACK_FRAME_SIZE 160
+
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 3
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 15
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 8
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 1
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R0
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R2
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE SLJIT_S390X_DEFAULT_STACK_FRAME_SIZE
+#define SLJIT_MASKED_SHIFT 1
+
+#elif (defined SLJIT_CONFIG_LOONGARCH && SLJIT_CONFIG_LOONGARCH)
+
+#define SLJIT_NUMBER_OF_REGISTERS 23
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 5
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 30
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 12
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 2
+#define SLJIT_TMP_DEST_REG SLJIT_TMP_R1
+#define SLJIT_TMP_MEM_REG SLJIT_TMP_R1
+#define SLJIT_TMP_DEST_FREG SLJIT_TMP_FR0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#define SLJIT_MASKED_SHIFT 1
+#define SLJIT_MASKED_SHIFT32 1
+
+#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+
+/* Just to have something. */
+#define SLJIT_NUMBER_OF_REGISTERS 0
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
+#define SLJIT_NUMBER_OF_TEMPORARY_REGISTERS 0
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 0
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
+#define SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS 0
+#define SLJIT_TMP_DEST_REG 0
+#define SLJIT_TMP_MEM_REG 0
+#define SLJIT_TMP_DEST_FREG 0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#endif
+
+#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
+
+#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
+	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
+
+#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
+	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+
+/**********************************/
+/* Temporary register management. */
+/**********************************/
+
+#define SLJIT_TMP_REGISTER_BASE (SLJIT_NUMBER_OF_REGISTERS + 2)
+#define SLJIT_TMP_FREGISTER_BASE (SLJIT_NUMBER_OF_FLOAT_REGISTERS + 1)
+
+/* WARNING: Accessing temporary registers is not recommended, because they
+   are also used by the JIT compiler for various computations. Using them
+   might have any side effects including incorrect operations and crashes,
+   so use them at your own risk. The machine registers themselves might have
+   limitations, e.g. the r0 register on s390x / ppc cannot be used as
+   base address for memory operations. */
+
+/* Temporary registers */
+#define SLJIT_TMP_R0		(SLJIT_TMP_REGISTER_BASE + 0)
+#define SLJIT_TMP_R1		(SLJIT_TMP_REGISTER_BASE + 1)
+#define SLJIT_TMP_R2		(SLJIT_TMP_REGISTER_BASE + 2)
+#define SLJIT_TMP_R3		(SLJIT_TMP_REGISTER_BASE + 3)
+#define SLJIT_TMP_R4		(SLJIT_TMP_REGISTER_BASE + 4)
+#define SLJIT_TMP_R5		(SLJIT_TMP_REGISTER_BASE + 5)
+#define SLJIT_TMP_R6		(SLJIT_TMP_REGISTER_BASE + 6)
+#define SLJIT_TMP_R7		(SLJIT_TMP_REGISTER_BASE + 7)
+#define SLJIT_TMP_R8		(SLJIT_TMP_REGISTER_BASE + 8)
+#define SLJIT_TMP_R9		(SLJIT_TMP_REGISTER_BASE + 9)
+#define SLJIT_TMP_R(i)		(SLJIT_TMP_REGISTER_BASE + (i))
+
+#define SLJIT_TMP_FR0		(SLJIT_TMP_FREGISTER_BASE + 0)
+#define SLJIT_TMP_FR1		(SLJIT_TMP_FREGISTER_BASE + 1)
+#define SLJIT_TMP_FR2		(SLJIT_TMP_FREGISTER_BASE + 2)
+#define SLJIT_TMP_FR3		(SLJIT_TMP_FREGISTER_BASE + 3)
+#define SLJIT_TMP_FR4		(SLJIT_TMP_FREGISTER_BASE + 4)
+#define SLJIT_TMP_FR5		(SLJIT_TMP_FREGISTER_BASE + 5)
+#define SLJIT_TMP_FR6		(SLJIT_TMP_FREGISTER_BASE + 6)
+#define SLJIT_TMP_FR7		(SLJIT_TMP_FREGISTER_BASE + 7)
+#define SLJIT_TMP_FR8		(SLJIT_TMP_FREGISTER_BASE + 8)
+#define SLJIT_TMP_FR9		(SLJIT_TMP_FREGISTER_BASE + 9)
+#define SLJIT_TMP_FR(i)		(SLJIT_TMP_FREGISTER_BASE + (i))
+
+/********************************/
+/* CPU status flags management. */
+/********************************/
+
+#if (defined SLJIT_CONFIG_ARM && SLJIT_CONFIG_ARM) \
+	|| (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) \
+	|| (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) \
+	|| (defined SLJIT_CONFIG_RISCV && SLJIT_CONFIG_RISCV) \
+	|| (defined SLJIT_CONFIG_S390X && SLJIT_CONFIG_S390X) \
+	|| (defined SLJIT_CONFIG_LOONGARCH && SLJIT_CONFIG_LOONGARCH)
+#define SLJIT_HAS_STATUS_FLAGS_STATE 1
+#endif
+
+/***************************************/
+/* Floating point register management. */
+/***************************************/
+
+#if (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) \
+	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#define SLJIT_F64_SECOND(reg) \
+	((reg) + SLJIT_FS0 + SLJIT_NUMBER_OF_TEMPORARY_FLOAT_REGISTERS)
+#else /* !SLJIT_CONFIG_ARM_32 && !SLJIT_CONFIG_MIPS_32 */
+#define SLJIT_F64_SECOND(reg) \
+	(reg)
+#endif /* SLJIT_CONFIG_ARM_32 || SLJIT_CONFIG_MIPS_32 */
+
+/*************************************/
+/* Debug and verbose related macros. */
+/*************************************/
+
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+
+#if !defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE)
+
+/* SLJIT_HALT_PROCESS must halt the process. */
+#ifndef SLJIT_HALT_PROCESS
+#define SLJIT_HALT_PROCESS() \
+	abort();
+#endif /* !SLJIT_HALT_PROCESS */
+
+#endif /* !SLJIT_ASSERT || !SLJIT_UNREACHABLE */
+
+/* Feel free to redefine these two macros. */
+#ifndef SLJIT_ASSERT
+
+#define SLJIT_ASSERT(x) \
+	do { \
+		if (SLJIT_UNLIKELY(!(x))) { \
+			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \
+			SLJIT_HALT_PROCESS(); \
+		} \
+	} while (0)
+
+#endif /* !SLJIT_ASSERT */
+
+#ifndef SLJIT_UNREACHABLE
+
+#define SLJIT_UNREACHABLE() \
+	do { \
+		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \
+		SLJIT_HALT_PROCESS(); \
+	} while (0)
+
+#endif /* !SLJIT_UNREACHABLE */
+
+#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
+
+/* Forcing empty, but valid statements. */
+#undef SLJIT_ASSERT
+#undef SLJIT_UNREACHABLE
+
+#define SLJIT_ASSERT(x) \
+	do { } while (0)
+#define SLJIT_UNREACHABLE() \
+	do { } while (0)
+
+#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
+
+#ifndef SLJIT_COMPILE_ASSERT
+
+#define SLJIT_COMPILE_ASSERT(x, description) \
+	switch(0) { case 0: case ((x) ? 1 : 0): break; }
+
+#endif /* !SLJIT_COMPILE_ASSERT */
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* SLJIT_CONFIG_INTERNAL_H_ */