tpy-lang 0.3.0.dev0__py3-none-any.whl

tpyc/_data/runtime/cpp/third_party/pcre2/src/pcre2_tables.c

@@ -0,0 +1,234 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+     Original API code Copyright (c) 1997-2012 University of Cambridge
+          New API code Copyright (c) 2016-2024 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This module contains some fixed tables that are used by more than one of the
+PCRE2 code modules. The tables are also #included by the pcre2test program,
+which uses macros to change their names from _pcre2_xxx to xxxx, thereby
+avoiding name clashes with the library. In this case, PCRE2_PCRE2TEST is
+defined. */
+
+#ifndef PCRE2_PCRE2TEST           /* We're compiling the library */
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+#include "pcre2_internal.h"
+#endif /* PCRE2_PCRE2TEST */
+
+/* Table of sizes for the fixed-length opcodes. It's defined in a macro so that
+the definition is next to the definition of the opcodes in pcre2_internal.h.
+This is mode-dependent, so it is skipped when this file is included by
+pcre2test. */
+
+#ifndef PCRE2_PCRE2TEST
+const uint8_t PRIV(OP_lengths)[] = { OP_LENGTHS };
+#endif
+
+/* Tables of horizontal and vertical whitespace characters, suitable for
+adding to classes. */
+
+const uint32_t PRIV(hspace_list)[] = { HSPACE_LIST };
+const uint32_t PRIV(vspace_list)[] = { VSPACE_LIST };
+
+/* These tables are the pairs of delimiters that are valid for callout string
+arguments. For each starting delimiter there must be a matching ending
+delimiter, which in fact is different only for bracket-like delimiters. */
+
+const uint32_t PRIV(callout_start_delims)[] = {
+  CHAR_GRAVE_ACCENT, CHAR_APOSTROPHE, CHAR_QUOTATION_MARK,
+  CHAR_CIRCUMFLEX_ACCENT, CHAR_PERCENT_SIGN, CHAR_NUMBER_SIGN,
+  CHAR_DOLLAR_SIGN, CHAR_LEFT_CURLY_BRACKET, 0 };
+
+const uint32_t PRIV(callout_end_delims[]) = {
+  CHAR_GRAVE_ACCENT, CHAR_APOSTROPHE, CHAR_QUOTATION_MARK,
+  CHAR_CIRCUMFLEX_ACCENT, CHAR_PERCENT_SIGN, CHAR_NUMBER_SIGN,
+  CHAR_DOLLAR_SIGN, CHAR_RIGHT_CURLY_BRACKET, 0 };
+
+
+/*************************************************
+*           Tables for UTF-8 support             *
+*************************************************/
+
+/* These tables are required by pcre2test in 16- or 32-bit mode, as well
+as for the library in 8-bit mode, because pcre2test uses UTF-8 internally for
+handling wide characters. */
+
+#if defined PCRE2_PCRE2TEST || \
+   (defined SUPPORT_UNICODE && \
+    defined PCRE2_CODE_UNIT_WIDTH && \
+    PCRE2_CODE_UNIT_WIDTH == 8)
+
+/* These are the breakpoints for different numbers of bytes in a UTF-8
+character. */
+
+const int PRIV(utf8_table1)[] =
+  { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff};
+
+const int PRIV(utf8_table1_size) = sizeof(PRIV(utf8_table1)) / sizeof(int);
+
+/* These are the indicator bits and the mask for the data bits to set in the
+first byte of a character, indexed by the number of additional bytes. */
+
+const int PRIV(utf8_table2)[] = { 0,    0xc0, 0xe0, 0xf0, 0xf8, 0xfc};
+const int PRIV(utf8_table3)[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};
+
+/* Table of the number of extra bytes, indexed by the first byte masked with
+0x3f. The highest number for a valid UTF-8 first byte is in fact 0x3d. */
+
+const uint8_t PRIV(utf8_table4)[] = {
+  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+  2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+  3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 };
+
+#endif /* UTF-8 support needed */
+
+/* Tables concerned with Unicode properties are relevant only when Unicode
+support is enabled. See also the pcre2_ucptables.c file, which is generated by
+a Python script from Unicode data files. */
+
+#ifdef SUPPORT_UNICODE
+
+/* Table to translate from particular type value to the general value. */
+
+const uint32_t PRIV(ucp_gentype)[] = {
+  ucp_C, ucp_C, ucp_C, ucp_C, ucp_C,  /* Cc, Cf, Cn, Co, Cs */
+  ucp_L, ucp_L, ucp_L, ucp_L, ucp_L,  /* Ll, Lu, Lm, Lo, Lt */
+  ucp_M, ucp_M, ucp_M,                /* Mc, Me, Mn */
+  ucp_N, ucp_N, ucp_N,                /* Nd, Nl, No */
+  ucp_P, ucp_P, ucp_P, ucp_P, ucp_P,  /* Pc, Pd, Pe, Pf, Pi */
+  ucp_P, ucp_P,                       /* Ps, Po */
+  ucp_S, ucp_S, ucp_S, ucp_S,         /* Sc, Sk, Sm, So */
+  ucp_Z, ucp_Z, ucp_Z                 /* Zl, Zp, Zs */
+};
+
+/* This table encodes the rules for finding the end of an extended grapheme
+cluster. Every code point has a grapheme break property which is one of the
+ucp_gbXX values defined in pcre2_ucp.h. These changed between Unicode versions
+10 and 11. The 2-dimensional table is indexed by the properties of two adjacent
+code points. The left property selects a word from the table, and the right
+property selects a bit from that word like this:
+
+  PRIV(ucp_gbtable)[left-property] & (1u << right-property)
+
+The value is non-zero if a grapheme break is NOT permitted between the relevant
+two code points. The breaking rules are as follows:
+
+1. Break at the start and end of text (pretty obviously).
+
+2. Do not break between a CR and LF; otherwise, break before and after
+   controls.
+
+3. Do not break Hangul syllable sequences, the rules for which are:
+
+    L may be followed by L, V, LV or LVT
+    LV or V may be followed by V or T
+    LVT or T may be followed by T
+
+4. Do not break before extending characters or zero-width-joiner (ZWJ).
+
+The following rules are only for extended grapheme clusters (but that's what we
+are implementing).
+
+5. Do not break before SpacingMarks.
+
+6. Do not break after Prepend characters.
+
+7. Do not break within emoji modifier sequences or emoji zwj sequences. That
+   is, do not break between characters with the Extended_Pictographic property
+   if a ZWJ intervenes. Extend characters are allowed between the characters;
+   this cannot be represented in this table, the code has to deal with it.
+
+8. Do not break within emoji flag sequences. That is, do not break between
+   regional indicator (RI) symbols if there are an odd number of RI characters
+   before the break point. This table encodes "join RI characters"; the code
+   has to deal with checking for previous adjoining RIs.
+
+9. Otherwise, break everywhere.
+*/
+
+#define ESZ (1<<ucp_gbExtend)|(1<<ucp_gbSpacingMark)|(1<<ucp_gbZWJ)
+
+const uint32_t PRIV(ucp_gbtable)[] = {
+   (1u<<ucp_gbLF),                                      /*  0 CR */
+   0,                                                   /*  1 LF */
+   0,                                                   /*  2 Control */
+   ESZ,                                                 /*  3 Extend */
+   ESZ|(1u<<ucp_gbPrepend)|                             /*  4 Prepend */
+       (1u<<ucp_gbL)|(1u<<ucp_gbV)|(1u<<ucp_gbT)|
+       (1u<<ucp_gbLV)|(1u<<ucp_gbLVT)|(1u<<ucp_gbOther)|
+       (1u<<ucp_gbRegional_Indicator),
+   ESZ,                                                 /*  5 SpacingMark */
+   ESZ|(1u<<ucp_gbL)|(1u<<ucp_gbV)|(1u<<ucp_gbLV)|      /*  6 L */
+       (1u<<ucp_gbLVT),
+   ESZ|(1u<<ucp_gbV)|(1u<<ucp_gbT),                     /*  7 V */
+   ESZ|(1u<<ucp_gbT),                                   /*  8 T */
+   ESZ|(1u<<ucp_gbV)|(1u<<ucp_gbT),                     /*  9 LV */
+   ESZ|(1u<<ucp_gbT),                                   /* 10 LVT */
+   (1u<<ucp_gbRegional_Indicator),                      /* 11 Regional Indicator */
+   ESZ,                                                 /* 12 Other */
+   ESZ|(1u<<ucp_gbExtended_Pictographic),               /* 13 ZWJ */
+   ESZ                                                  /* 14 Extended Pictographic */
+};
+
+#undef ESZ
+
+#ifdef SUPPORT_JIT
+/* This table reverses PRIV(ucp_gentype). We can save the cost
+of a memory load. */
+
+const int PRIV(ucp_typerange)[] = {
+  ucp_Cc, ucp_Cs,
+  ucp_Ll, ucp_Lu,
+  ucp_Mc, ucp_Mn,
+  ucp_Nd, ucp_No,
+  ucp_Pc, ucp_Ps,
+  ucp_Sc, ucp_So,
+  ucp_Zl, ucp_Zs,
+};
+#endif /* SUPPORT_JIT */
+
+/* Finally, include the tables that are auto-generated from the Unicode data
+files. */
+
+#include "pcre2_ucptables.c"
+
+#endif /* SUPPORT_UNICODE */
+
+/* End of pcre2_tables.c */