tpy-lang 0.3.0.dev0__py3-none-any.whl

tpyc/_data/runtime/cpp/third_party/pcre2/src/pcre2_auto_possess.c

@@ -0,0 +1,1371 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+     Original API code Copyright (c) 1997-2012 University of Cambridge
+          New API code Copyright (c) 2016-2022 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This module contains functions that scan a compiled pattern and change
+repeats into possessive repeats where possible. */
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+
+#include "pcre2_internal.h"
+
+
+/*************************************************
+*        Tables for auto-possessification        *
+*************************************************/
+
+/* This table is used to check whether auto-possessification is possible
+between adjacent character-type opcodes. The left-hand (repeated) opcode is
+used to select the row, and the right-hand opcode is use to select the column.
+A value of 1 means that auto-possessification is OK. For example, the second
+value in the first row means that \D+\d can be turned into \D++\d.
+
+The Unicode property types (\P and \p) have to be present to fill out the table
+because of what their opcode values are, but the table values should always be
+zero because property types are handled separately in the code. The last four
+columns apply to items that cannot be repeated, so there is no need to have
+rows for them. Note that OP_DIGIT etc. are generated only when PCRE_UCP is
+*not* set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
+
+#define APTROWS (LAST_AUTOTAB_LEFT_OP - FIRST_AUTOTAB_OP + 1)
+#define APTCOLS (LAST_AUTOTAB_RIGHT_OP - FIRST_AUTOTAB_OP + 1)
+
+static const uint8_t autoposstab[APTROWS][APTCOLS] = {
+/* \D \d \S \s \W \w  . .+ \C \P \p \R \H \h \V \v \X \Z \z  $ $M */
+  { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \D */
+  { 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \d */
+  { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \S */
+  { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \s */
+  { 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \W */
+  { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 1, 1, 1 },  /* \w */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* .  */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* .+ */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 },  /* \C */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },  /* \P */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },  /* \p */
+  { 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 },  /* \R */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0 },  /* \H */
+  { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 0, 0 },  /* \h */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0 },  /* \V */
+  { 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 0 },  /* \v */
+  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 }   /* \X */
+};
+
+#ifdef SUPPORT_UNICODE
+/* This table is used to check whether auto-possessification is possible
+between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP). The
+left-hand (repeated) opcode is used to select the row, and the right-hand
+opcode is used to select the column. The values are as follows:
+
+  0   Always return FALSE (never auto-possessify)
+  1   Character groups are distinct (possessify if both are OP_PROP)
+  2   Check character categories in the same group (general or particular)
+  3   TRUE if the two opcodes are not the same (PROP vs NOTPROP)
+
+  4   Check left general category vs right particular category
+  5   Check right general category vs left particular category
+
+  6   Left alphanum vs right general category
+  7   Left space vs right general category
+  8   Left word vs right general category
+
+  9   Right alphanum vs left general category
+ 10   Right space vs left general category
+ 11   Right word vs left general category
+
+ 12   Left alphanum vs right particular category
+ 13   Left space vs right particular category
+ 14   Left word vs right particular category
+
+ 15   Right alphanum vs left particular category
+ 16   Right space vs left particular category
+ 17   Right word vs left particular category
+*/
+
+static const uint8_t propposstab[PT_TABSIZE][PT_TABSIZE] = {
+/* ANY LAMP GC  PC  SC  SCX ALNUM SPACE PXSPACE WORD CLIST UCNC BIDICL BOOL */
+  { 0,  0,  0,  0,  0,   0,    0,    0,      0,   0,    0,   0,    0,    0 },  /* PT_ANY */
+  { 0,  3,  0,  0,  0,   0,    3,    1,      1,   0,    0,   0,    0,    0 },  /* PT_LAMP */
+  { 0,  0,  2,  4,  0,   0,    9,   10,     10,  11,    0,   0,    0,    0 },  /* PT_GC */
+  { 0,  0,  5,  2,  0,   0,   15,   16,     16,  17,    0,   0,    0,    0 },  /* PT_PC */
+  { 0,  0,  0,  0,  2,   2,    0,    0,      0,   0,    0,   0,    0,    0 },  /* PT_SC */
+  { 0,  0,  0,  0,  2,   2,    0,    0,      0,   0,    0,   0,    0,    0 },  /* PT_SCX */
+  { 0,  3,  6, 12,  0,   0,    3,    1,      1,   0,    0,   0,    0,    0 },  /* PT_ALNUM */
+  { 0,  1,  7, 13,  0,   0,    1,    3,      3,   1,    0,   0,    0,    0 },  /* PT_SPACE */
+  { 0,  1,  7, 13,  0,   0,    1,    3,      3,   1,    0,   0,    0,    0 },  /* PT_PXSPACE */
+  { 0,  0,  8, 14,  0,   0,    0,    1,      1,   3,    0,   0,    0,    0 },  /* PT_WORD */
+  { 0,  0,  0,  0,  0,   0,    0,    0,      0,   0,    0,   0,    0,    0 },  /* PT_CLIST */
+  { 0,  0,  0,  0,  0,   0,    0,    0,      0,   0,    0,   3,    0,    0 },  /* PT_UCNC */
+  { 0,  0,  0,  0,  0,   0,    0,    0,      0,   0,    0,   0,    0,    0 },  /* PT_BIDICL */
+  { 0,  0,  0,  0,  0,   0,    0,    0,      0,   0,    0,   0,    0,    0 }   /* PT_BOOL */
+};
+
+/* This table is used to check whether auto-possessification is possible
+between adjacent Unicode property opcodes (OP_PROP and OP_NOTPROP) when one
+specifies a general category and the other specifies a particular category. The
+row is selected by the general category and the column by the particular
+category. The value is 1 if the particular category is not part of the general
+category. */
+
+static const uint8_t catposstab[7][30] = {
+/* Cc Cf Cn Co Cs Ll Lm Lo Lt Lu Mc Me Mn Nd Nl No Pc Pd Pe Pf Pi Po Ps Sc Sk Sm So Zl Zp Zs */
+  { 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* C */
+  { 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* L */
+  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* M */
+  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },  /* N */
+  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1 },  /* P */
+  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1 },  /* S */
+  { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }   /* Z */
+};
+
+/* This table is used when checking ALNUM, (PX)SPACE, SPACE, and WORD against
+a general or particular category. The properties in each row are those
+that apply to the character set in question. Duplication means that a little
+unnecessary work is done when checking, but this keeps things much simpler
+because they can all use the same code. For more details see the comment where
+this table is used.
+
+Note: SPACE and PXSPACE used to be different because Perl excluded VT from
+"space", but from Perl 5.18 it's included, so both categories are treated the
+same here. */
+
+static const uint8_t posspropstab[3][4] = {
+  { ucp_L, ucp_N, ucp_N, ucp_Nl },  /* ALNUM, 3rd and 4th values redundant */
+  { ucp_Z, ucp_Z, ucp_C, ucp_Cc },  /* SPACE and PXSPACE, 2nd value redundant */
+  { ucp_L, ucp_N, ucp_P, ucp_Po }   /* WORD */
+};
+#endif  /* SUPPORT_UNICODE */
+
+
+
+#ifdef SUPPORT_UNICODE
+/*************************************************
+*        Check a character and a property        *
+*************************************************/
+
+/* This function is called by compare_opcodes() when a property item is
+adjacent to a fixed character.
+
+Arguments:
+  c            the character
+  ptype        the property type
+  pdata        the data for the type
+  negated      TRUE if it's a negated property (\P or \p{^)
+
+Returns:       TRUE if auto-possessifying is OK
+*/
+
+static BOOL
+check_char_prop(uint32_t c, unsigned int ptype, unsigned int pdata,
+  BOOL negated)
+{
+BOOL ok;
+const uint32_t *p;
+const ucd_record *prop = GET_UCD(c);
+
+switch(ptype)
+  {
+  case PT_LAMP:
+  return (prop->chartype == ucp_Lu ||
+          prop->chartype == ucp_Ll ||
+          prop->chartype == ucp_Lt) == negated;
+
+  case PT_GC:
+  return (pdata == PRIV(ucp_gentype)[prop->chartype]) == negated;
+
+  case PT_PC:
+  return (pdata == prop->chartype) == negated;
+
+  case PT_SC:
+  return (pdata == prop->script) == negated;
+
+  case PT_SCX:
+  ok = (pdata == prop->script
+        || MAPBIT(PRIV(ucd_script_sets) + UCD_SCRIPTX_PROP(prop), pdata) != 0);
+  return ok == negated;
+
+  /* These are specials */
+
+  case PT_ALNUM:
+  return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+          PRIV(ucp_gentype)[prop->chartype] == ucp_N) == negated;
+
+  /* Perl space used to exclude VT, but from Perl 5.18 it is included, which
+  means that Perl space and POSIX space are now identical. PCRE was changed
+  at release 8.34. */
+
+  case PT_SPACE:    /* Perl space */
+  case PT_PXSPACE:  /* POSIX space */
+  switch(c)
+    {
+    HSPACE_CASES:
+    VSPACE_CASES:
+    return negated;
+
+    default:
+    return (PRIV(ucp_gentype)[prop->chartype] == ucp_Z) == negated;
+    }
+  break;  /* Control never reaches here */
+
+  case PT_WORD:
+  return (PRIV(ucp_gentype)[prop->chartype] == ucp_L ||
+          PRIV(ucp_gentype)[prop->chartype] == ucp_N ||
+          c == CHAR_UNDERSCORE) == negated;
+
+  case PT_CLIST:
+  p = PRIV(ucd_caseless_sets) + prop->caseset;
+  for (;;)
+    {
+    if (c < *p) return !negated;
+    if (c == *p++) return negated;
+    }
+  break;  /* Control never reaches here */
+
+  /* Haven't yet thought these through. */
+
+  case PT_BIDICL:
+  return FALSE;
+
+  case PT_BOOL:
+  return FALSE;
+  }
+
+return FALSE;
+}
+#endif  /* SUPPORT_UNICODE */
+
+
+
+/*************************************************
+*        Base opcode of repeated opcodes         *
+*************************************************/
+
+/* Returns the base opcode for repeated single character type opcodes. If the
+opcode is not a repeated character type, it returns with the original value.
+
+Arguments:  c opcode
+Returns:    base opcode for the type
+*/
+
+static PCRE2_UCHAR
+get_repeat_base(PCRE2_UCHAR c)
+{
+return (c > OP_TYPEPOSUPTO)? c :
+       (c >= OP_TYPESTAR)?   OP_TYPESTAR :
+       (c >= OP_NOTSTARI)?   OP_NOTSTARI :
+       (c >= OP_NOTSTAR)?    OP_NOTSTAR :
+       (c >= OP_STARI)?      OP_STARI :
+                             OP_STAR;
+}
+
+
+/*************************************************
+*        Fill the character property list        *
+*************************************************/
+
+/* Checks whether the code points to an opcode that can take part in auto-
+possessification, and if so, fills a list with its properties.
+
+Arguments:
+  code        points to start of expression
+  utf         TRUE if in UTF mode
+  ucp         TRUE if in UCP mode
+  fcc         points to the case-flipping table
+  list        points to output list
+              list[0] will be filled with the opcode
+              list[1] will be non-zero if this opcode
+                can match an empty character string
+              list[2..7] depends on the opcode
+
+Returns:      points to the start of the next opcode if *code is accepted
+              NULL if *code is not accepted
+*/
+
+static PCRE2_SPTR
+get_chr_property_list(PCRE2_SPTR code, BOOL utf, BOOL ucp, const uint8_t *fcc,
+  uint32_t *list)
+{
+PCRE2_UCHAR c = *code;
+PCRE2_UCHAR base;
+PCRE2_SPTR end;
+uint32_t chr;
+
+#ifdef SUPPORT_UNICODE
+uint32_t *clist_dest;
+const uint32_t *clist_src;
+#else
+(void)utf;    /* Suppress "unused parameter" compiler warnings */
+(void)ucp;
+#endif
+
+list[0] = c;
+list[1] = FALSE;
+code++;
+
+if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
+  {
+  base = get_repeat_base(c);
+  c -= (base - OP_STAR);
+
+  if (c == OP_UPTO || c == OP_MINUPTO || c == OP_EXACT || c == OP_POSUPTO)
+    code += IMM2_SIZE;
+
+  list[1] = (c != OP_PLUS && c != OP_MINPLUS && c != OP_EXACT &&
+             c != OP_POSPLUS);
+
+  switch(base)
+    {
+    case OP_STAR:
+    list[0] = OP_CHAR;
+    break;
+
+    case OP_STARI:
+    list[0] = OP_CHARI;
+    break;
+
+    case OP_NOTSTAR:
+    list[0] = OP_NOT;
+    break;
+
+    case OP_NOTSTARI:
+    list[0] = OP_NOTI;
+    break;
+
+    case OP_TYPESTAR:
+    list[0] = *code;
+    code++;
+    break;
+    }
+  c = list[0];
+  }
+
+switch(c)
+  {
+  case OP_NOT_DIGIT:
+  case OP_DIGIT:
+  case OP_NOT_WHITESPACE:
+  case OP_WHITESPACE:
+  case OP_NOT_WORDCHAR:
+  case OP_WORDCHAR:
+  case OP_ANY:
+  case OP_ALLANY:
+  case OP_ANYNL:
+  case OP_NOT_HSPACE:
+  case OP_HSPACE:
+  case OP_NOT_VSPACE:
+  case OP_VSPACE:
+  case OP_EXTUNI:
+  case OP_EODN:
+  case OP_EOD:
+  case OP_DOLL:
+  case OP_DOLLM:
+  return code;
+
+  case OP_CHAR:
+  case OP_NOT:
+  GETCHARINCTEST(chr, code);
+  list[2] = chr;
+  list[3] = NOTACHAR;
+  return code;
+
+  case OP_CHARI:
+  case OP_NOTI:
+  list[0] = (c == OP_CHARI) ? OP_CHAR : OP_NOT;
+  GETCHARINCTEST(chr, code);
+  list[2] = chr;
+
+#ifdef SUPPORT_UNICODE
+  if (chr < 128 || (chr < 256 && !utf && !ucp))
+    list[3] = fcc[chr];
+  else
+    list[3] = UCD_OTHERCASE(chr);
+#elif defined SUPPORT_WIDE_CHARS
+  list[3] = (chr < 256) ? fcc[chr] : chr;
+#else
+  list[3] = fcc[chr];
+#endif
+
+  /* The othercase might be the same value. */
+
+  if (chr == list[3])
+    list[3] = NOTACHAR;
+  else
+    list[4] = NOTACHAR;
+  return code;
+
+#ifdef SUPPORT_UNICODE
+  case OP_PROP:
+  case OP_NOTPROP:
+  if (code[0] != PT_CLIST)
+    {
+    list[2] = code[0];
+    list[3] = code[1];
+    return code + 2;
+    }
+
+  /* Convert only if we have enough space. */
+
+  clist_src = PRIV(ucd_caseless_sets) + code[1];
+  clist_dest = list + 2;
+  code += 2;
+
+  do {
+     if (clist_dest >= list + 8)
+       {
+       /* Early return if there is not enough space. This should never
+       happen, since all clists are shorter than 5 character now. */
+       list[2] = code[0];
+       list[3] = code[1];
+       return code;
+       }
+     *clist_dest++ = *clist_src;
+     }
+  while(*clist_src++ != NOTACHAR);
+
+  /* All characters are stored. The terminating NOTACHAR is copied from the
+  clist itself. */
+
+  list[0] = (c == OP_PROP) ? OP_CHAR : OP_NOT;
+  return code;
+#endif
+
+  case OP_NCLASS:
+  case OP_CLASS:
+#ifdef SUPPORT_WIDE_CHARS
+  case OP_XCLASS:
+  if (c == OP_XCLASS)
+    end = code + GET(code, 0) - 1;
+  else
+#endif
+    end = code + 32 / sizeof(PCRE2_UCHAR);
+
+  switch(*end)
+    {
+    case OP_CRSTAR:
+    case OP_CRMINSTAR:
+    case OP_CRQUERY:
+    case OP_CRMINQUERY:
+    case OP_CRPOSSTAR:
+    case OP_CRPOSQUERY:
+    list[1] = TRUE;
+    end++;
+    break;
+
+    case OP_CRPLUS:
+    case OP_CRMINPLUS:
+    case OP_CRPOSPLUS:
+    end++;
+    break;
+
+    case OP_CRRANGE:
+    case OP_CRMINRANGE:
+    case OP_CRPOSRANGE:
+    list[1] = (GET2(end, 1) == 0);
+    end += 1 + 2 * IMM2_SIZE;
+    break;
+    }
+  list[2] = (uint32_t)(end - code);
+  return end;
+  }
+
+return NULL;    /* Opcode not accepted */
+}
+
+
+
+/*************************************************
+*    Scan further character sets for match       *
+*************************************************/
+
+/* Checks whether the base and the current opcode have a common character, in
+which case the base cannot be possessified.
+
+Arguments:
+  code        points to the byte code
+  utf         TRUE in UTF mode
+  ucp         TRUE in UCP mode
+  cb          compile data block
+  base_list   the data list of the base opcode
+  base_end    the end of the base opcode
+  rec_limit   points to recursion depth counter
+
+Returns:      TRUE if the auto-possessification is possible
+*/
+
+static BOOL
+compare_opcodes(PCRE2_SPTR code, BOOL utf, BOOL ucp, const compile_block *cb,
+  const uint32_t *base_list, PCRE2_SPTR base_end, int *rec_limit)
+{
+PCRE2_UCHAR c;
+uint32_t list[8];
+const uint32_t *chr_ptr;
+const uint32_t *ochr_ptr;
+const uint32_t *list_ptr;
+PCRE2_SPTR next_code;
+#ifdef SUPPORT_WIDE_CHARS
+PCRE2_SPTR xclass_flags;
+#endif
+const uint8_t *class_bitset;
+const uint8_t *set1, *set2, *set_end;
+uint32_t chr;
+BOOL accepted, invert_bits;
+BOOL entered_a_group = FALSE;
+
+if (--(*rec_limit) <= 0) return FALSE;  /* Recursion has gone too deep */
+
+/* Note: the base_list[1] contains whether the current opcode has a greedy
+(represented by a non-zero value) quantifier. This is a different from
+other character type lists, which store here that the character iterator
+matches to an empty string (also represented by a non-zero value). */
+
+for(;;)
+  {
+  PCRE2_SPTR bracode;
+
+  /* All operations move the code pointer forward.
+  Therefore infinite recursions are not possible. */
+
+  c = *code;
+
+  /* Skip over callouts */
+
+  if (c == OP_CALLOUT)
+    {
+    code += PRIV(OP_lengths)[c];
+    continue;
+    }
+
+  if (c == OP_CALLOUT_STR)
+    {
+    code += GET(code, 1 + 2*LINK_SIZE);
+    continue;
+    }
+
+  /* At the end of a branch, skip to the end of the group. */
+
+  if (c == OP_ALT)
+    {
+    do code += GET(code, 1); while (*code == OP_ALT);
+    c = *code;
+    }
+
+  /* Inspect the next opcode. */
+
+  switch(c)
+    {
+    /* We can always possessify a greedy iterator at the end of the pattern,
+    which is reached after skipping over the final OP_KET. A non-greedy
+    iterator must never be possessified. */
+
+    case OP_END:
+    return base_list[1] != 0;
+
+    /* When an iterator is at the end of certain kinds of group we can inspect
+    what follows the group by skipping over the closing ket. Note that this
+    does not apply to OP_KETRMAX or OP_KETRMIN because what follows any given
+    iteration is variable (could be another iteration or could be the next
+    item). As these two opcodes are not listed in the next switch, they will
+    end up as the next code to inspect, and return FALSE by virtue of being
+    unsupported. */
+
+    case OP_KET:
+    case OP_KETRPOS:
+    /* The non-greedy case cannot be converted to a possessive form. */
+
+    if (base_list[1] == 0) return FALSE;
+
+    /* If the bracket is capturing it might be referenced by an OP_RECURSE
+    so its last iterator can never be possessified if the pattern contains
+    recursions. (This could be improved by keeping a list of group numbers that
+    are called by recursion.) */
+
+    bracode = code - GET(code, 1);
+    switch(*bracode)
+      {
+      case OP_CBRA:
+      case OP_SCBRA:
+      case OP_CBRAPOS:
+      case OP_SCBRAPOS:
+      if (cb->had_recurse) return FALSE;
+      break;
+
+      /* A script run might have to backtrack if the iterated item can match
+      characters from more than one script. So give up unless repeating an
+      explicit character. */
+
+      case OP_SCRIPT_RUN:
+      if (base_list[0] != OP_CHAR && base_list[0] != OP_CHARI)
+        return FALSE;
+      break;
+
+      /* Atomic sub-patterns and assertions can always auto-possessify their
+      last iterator except for variable length lookbehinds. However, if the
+      group was entered as a result of checking a previous iterator, this is
+      not possible. */
+
+      case OP_ASSERT:
+      case OP_ASSERT_NOT:
+      case OP_ONCE:
+      return !entered_a_group;
+
+      case OP_ASSERTBACK:
+      case OP_ASSERTBACK_NOT:
+      return (bracode[1+LINK_SIZE] == OP_VREVERSE)? FALSE : !entered_a_group;
+
+      /* Non-atomic assertions - don't possessify last iterator. This needs
+      more thought. */
+
+      case OP_ASSERT_NA:
+      case OP_ASSERTBACK_NA:
+      return FALSE;
+      }
+
+    /* Skip over the bracket and inspect what comes next. */
+
+    code += PRIV(OP_lengths)[c];
+    continue;
+
+    /* Handle cases where the next item is a group. */
+
+    case OP_ONCE:
+    case OP_BRA:
+    case OP_CBRA:
+    next_code = code + GET(code, 1);
+    code += PRIV(OP_lengths)[c];
+
+    /* Check each branch. We have to recurse a level for all but the last
+    branch. */
+
+    while (*next_code == OP_ALT)
+      {
+      if (!compare_opcodes(code, utf, ucp, cb, base_list, base_end, rec_limit))
+        return FALSE;
+      code = next_code + 1 + LINK_SIZE;
+      next_code += GET(next_code, 1);
+      }
+
+    entered_a_group = TRUE;
+    continue;
+
+    case OP_BRAZERO:
+    case OP_BRAMINZERO:
+
+    next_code = code + 1;
+    if (*next_code != OP_BRA && *next_code != OP_CBRA &&
+        *next_code != OP_ONCE) return FALSE;
+
+    do next_code += GET(next_code, 1); while (*next_code == OP_ALT);
+
+    /* The bracket content will be checked by the OP_BRA/OP_CBRA case above. */
+
+    next_code += 1 + LINK_SIZE;
+    if (!compare_opcodes(next_code, utf, ucp, cb, base_list, base_end,
+         rec_limit))
+      return FALSE;
+
+    code += PRIV(OP_lengths)[c];
+    continue;
+
+    /* The next opcode does not need special handling; fall through and use it
+    to see if the base can be possessified. */
+
+    default:
+    break;
+    }
+
+  /* We now have the next appropriate opcode to compare with the base. Check
+  for a supported opcode, and load its properties. */
+
+  code = get_chr_property_list(code, utf, ucp, cb->fcc, list);
+  if (code == NULL) return FALSE;    /* Unsupported */
+
+  /* If either opcode is a small character list, set pointers for comparing
+  characters from that list with another list, or with a property. */
+
+  if (base_list[0] == OP_CHAR)
+    {
+    chr_ptr = base_list + 2;
+    list_ptr = list;
+    }
+  else if (list[0] == OP_CHAR)
+    {
+    chr_ptr = list + 2;
+    list_ptr = base_list;
+    }
+
+  /* Character bitsets can also be compared to certain opcodes. */
+
+  else if (base_list[0] == OP_CLASS || list[0] == OP_CLASS
+#if PCRE2_CODE_UNIT_WIDTH == 8
+      /* In 8 bit, non-UTF mode, OP_CLASS and OP_NCLASS are the same. */
+      || (!utf && (base_list[0] == OP_NCLASS || list[0] == OP_NCLASS))
+#endif
+      )
+    {
+#if PCRE2_CODE_UNIT_WIDTH == 8
+    if (base_list[0] == OP_CLASS || (!utf && base_list[0] == OP_NCLASS))
+#else
+    if (base_list[0] == OP_CLASS)
+#endif
+      {
+      set1 = (uint8_t *)(base_end - base_list[2]);
+      list_ptr = list;
+      }
+    else
+      {
+      set1 = (uint8_t *)(code - list[2]);
+      list_ptr = base_list;
+      }
+
+    invert_bits = FALSE;
+    switch(list_ptr[0])
+      {
+      case OP_CLASS:
+      case OP_NCLASS:
+      set2 = (uint8_t *)
+        ((list_ptr == list ? code : base_end) - list_ptr[2]);
+      break;
+
+#ifdef SUPPORT_WIDE_CHARS
+      case OP_XCLASS:
+      xclass_flags = (list_ptr == list ? code : base_end) - list_ptr[2] + LINK_SIZE;
+      if ((*xclass_flags & XCL_HASPROP) != 0) return FALSE;
+      if ((*xclass_flags & XCL_MAP) == 0)
+        {
+        /* No bits are set for characters < 256. */
+        if (list[1] == 0) return (*xclass_flags & XCL_NOT) == 0;
+        /* Might be an empty repeat. */
+        continue;
+        }
+      set2 = (uint8_t *)(xclass_flags + 1);
+      break;
+#endif
+
+      case OP_NOT_DIGIT:
+      invert_bits = TRUE;
+      /* Fall through */
+      case OP_DIGIT:
+      set2 = (uint8_t *)(cb->cbits + cbit_digit);
+      break;
+
+      case OP_NOT_WHITESPACE:
+      invert_bits = TRUE;
+      /* Fall through */
+      case OP_WHITESPACE:
+      set2 = (uint8_t *)(cb->cbits + cbit_space);
+      break;
+
+      case OP_NOT_WORDCHAR:
+      invert_bits = TRUE;
+      /* Fall through */
+      case OP_WORDCHAR:
+      set2 = (uint8_t *)(cb->cbits + cbit_word);
+      break;
+
+      default:
+      return FALSE;
+      }
+
+    /* Because the bit sets are unaligned bytes, we need to perform byte
+    comparison here. */
+
+    set_end = set1 + 32;
+    if (invert_bits)
+      {
+      do
+        {
+        if ((*set1++ & ~(*set2++)) != 0) return FALSE;
+        }
+      while (set1 < set_end);
+      }
+    else
+      {
+      do
+        {
+        if ((*set1++ & *set2++) != 0) return FALSE;
+        }
+      while (set1 < set_end);
+      }
+
+    if (list[1] == 0) return TRUE;
+    /* Might be an empty repeat. */
+    continue;
+    }
+
+  /* Some property combinations also acceptable. Unicode property opcodes are
+  processed specially; the rest can be handled with a lookup table. */
+
+  else
+    {
+    uint32_t leftop, rightop;
+
+    leftop = base_list[0];
+    rightop = list[0];
+
+#ifdef SUPPORT_UNICODE
+    accepted = FALSE; /* Always set in non-unicode case. */
+    if (leftop == OP_PROP || leftop == OP_NOTPROP)
+      {
+      if (rightop == OP_EOD)
+        accepted = TRUE;
+      else if (rightop == OP_PROP || rightop == OP_NOTPROP)
+        {
+        int n;
+        const uint8_t *p;
+        BOOL same = leftop == rightop;
+        BOOL lisprop = leftop == OP_PROP;
+        BOOL risprop = rightop == OP_PROP;
+        BOOL bothprop = lisprop && risprop;
+
+        /* There's a table that specifies how each combination is to be
+        processed:
+          0   Always return FALSE (never auto-possessify)
+          1   Character groups are distinct (possessify if both are OP_PROP)
+          2   Check character categories in the same group (general or particular)
+          3   Return TRUE if the two opcodes are not the same
+          ... see comments below
+        */
+
+        n = propposstab[base_list[2]][list[2]];
+        switch(n)
+          {
+          case 0: break;
+          case 1: accepted = bothprop; break;
+          case 2: accepted = (base_list[3] == list[3]) != same; break;
+          case 3: accepted = !same; break;
+
+          case 4:  /* Left general category, right particular category */
+          accepted = risprop && catposstab[base_list[3]][list[3]] == same;
+          break;
+
+          case 5:  /* Right general category, left particular category */
+          accepted = lisprop && catposstab[list[3]][base_list[3]] == same;
+          break;
+
+          /* This code is logically tricky. Think hard before fiddling with it.
+          The posspropstab table has four entries per row. Each row relates to
+          one of PCRE's special properties such as ALNUM or SPACE or WORD.
+          Only WORD actually needs all four entries, but using repeats for the
+          others means they can all use the same code below.
+
+          The first two entries in each row are Unicode general categories, and
+          apply always, because all the characters they include are part of the
+          PCRE character set. The third and fourth entries are a general and a
+          particular category, respectively, that include one or more relevant
+          characters. One or the other is used, depending on whether the check
+          is for a general or a particular category. However, in both cases the
+          category contains more characters than the specials that are defined
+          for the property being tested against. Therefore, it cannot be used
+          in a NOTPROP case.
+
+          Example: the row for WORD contains ucp_L, ucp_N, ucp_P, ucp_Po.
+          Underscore is covered by ucp_P or ucp_Po. */
+
+          case 6:  /* Left alphanum vs right general category */
+          case 7:  /* Left space vs right general category */
+          case 8:  /* Left word vs right general category */
+          p = posspropstab[n-6];
+          accepted = risprop && lisprop ==
+            (list[3] != p[0] &&
+             list[3] != p[1] &&
+            (list[3] != p[2] || !lisprop));
+          break;
+
+          case 9:   /* Right alphanum vs left general category */
+          case 10:  /* Right space vs left general category */
+          case 11:  /* Right word vs left general category */
+          p = posspropstab[n-9];
+          accepted = lisprop && risprop ==
+            (base_list[3] != p[0] &&
+             base_list[3] != p[1] &&
+            (base_list[3] != p[2] || !risprop));
+          break;
+
+          case 12:  /* Left alphanum vs right particular category */
+          case 13:  /* Left space vs right particular category */
+          case 14:  /* Left word vs right particular category */
+          p = posspropstab[n-12];
+          accepted = risprop && lisprop ==
+            (catposstab[p[0]][list[3]] &&
+             catposstab[p[1]][list[3]] &&
+            (list[3] != p[3] || !lisprop));
+          break;
+
+          case 15:  /* Right alphanum vs left particular category */
+          case 16:  /* Right space vs left particular category */
+          case 17:  /* Right word vs left particular category */
+          p = posspropstab[n-15];
+          accepted = lisprop && risprop ==
+            (catposstab[p[0]][base_list[3]] &&
+             catposstab[p[1]][base_list[3]] &&
+            (base_list[3] != p[3] || !risprop));
+          break;
+          }
+        }
+      }
+
+    else
+#endif  /* SUPPORT_UNICODE */
+
+    accepted = leftop >= FIRST_AUTOTAB_OP && leftop <= LAST_AUTOTAB_LEFT_OP &&
+           rightop >= FIRST_AUTOTAB_OP && rightop <= LAST_AUTOTAB_RIGHT_OP &&
+           autoposstab[leftop - FIRST_AUTOTAB_OP][rightop - FIRST_AUTOTAB_OP];
+
+    if (!accepted) return FALSE;
+
+    if (list[1] == 0) return TRUE;
+    /* Might be an empty repeat. */
+    continue;
+    }
+
+  /* Control reaches here only if one of the items is a small character list.
+  All characters are checked against the other side. */
+
+  do
+    {
+    chr = *chr_ptr;
+
+    switch(list_ptr[0])
+      {
+      case OP_CHAR:
+      ochr_ptr = list_ptr + 2;
+      do
+        {
+        if (chr == *ochr_ptr) return FALSE;
+        ochr_ptr++;
+        }
+      while(*ochr_ptr != NOTACHAR);
+      break;
+
+      case OP_NOT:
+      ochr_ptr = list_ptr + 2;
+      do
+        {
+        if (chr == *ochr_ptr)
+          break;
+        ochr_ptr++;
+        }
+      while(*ochr_ptr != NOTACHAR);
+      if (*ochr_ptr == NOTACHAR) return FALSE;   /* Not found */
+      break;
+
+      /* Note that OP_DIGIT etc. are generated only when PCRE2_UCP is *not*
+      set. When it is set, \d etc. are converted into OP_(NOT_)PROP codes. */
+
+      case OP_DIGIT:
+      if (chr < 256 && (cb->ctypes[chr] & ctype_digit) != 0) return FALSE;
+      break;
+
+      case OP_NOT_DIGIT:
+      if (chr > 255 || (cb->ctypes[chr] & ctype_digit) == 0) return FALSE;
+      break;
+
+      case OP_WHITESPACE:
+      if (chr < 256 && (cb->ctypes[chr] & ctype_space) != 0) return FALSE;
+      break;
+
+      case OP_NOT_WHITESPACE:
+      if (chr > 255 || (cb->ctypes[chr] & ctype_space) == 0) return FALSE;
+      break;
+
+      case OP_WORDCHAR:
+      if (chr < 255 && (cb->ctypes[chr] & ctype_word) != 0) return FALSE;
+      break;
+
+      case OP_NOT_WORDCHAR:
+      if (chr > 255 || (cb->ctypes[chr] & ctype_word) == 0) return FALSE;
+      break;
+
+      case OP_HSPACE:
+      switch(chr)
+        {
+        HSPACE_CASES: return FALSE;
+        default: break;
+        }
+      break;
+
+      case OP_NOT_HSPACE:
+      switch(chr)
+        {
+        HSPACE_CASES: break;
+        default: return FALSE;
+        }
+      break;
+
+      case OP_ANYNL:
+      case OP_VSPACE:
+      switch(chr)
+        {
+        VSPACE_CASES: return FALSE;
+        default: break;
+        }
+      break;
+
+      case OP_NOT_VSPACE:
+      switch(chr)
+        {
+        VSPACE_CASES: break;
+        default: return FALSE;
+        }
+      break;
+
+      case OP_DOLL:
+      case OP_EODN:
+      switch (chr)
+        {
+        case CHAR_CR:
+        case CHAR_LF:
+        case CHAR_VT:
+        case CHAR_FF:
+        case CHAR_NEL:
+#ifndef EBCDIC
+        case 0x2028:
+        case 0x2029:
+#endif  /* Not EBCDIC */
+        return FALSE;
+        }
+      break;
+
+      case OP_EOD:    /* Can always possessify before \z */
+      break;
+
+#ifdef SUPPORT_UNICODE
+      case OP_PROP:
+      case OP_NOTPROP:
+      if (!check_char_prop(chr, list_ptr[2], list_ptr[3],
+            list_ptr[0] == OP_NOTPROP))
+        return FALSE;
+      break;
+#endif
+
+      case OP_NCLASS:
+      if (chr > 255) return FALSE;
+      /* Fall through */
+
+      case OP_CLASS:
+      if (chr > 255) break;
+      class_bitset = (uint8_t *)
+        ((list_ptr == list ? code : base_end) - list_ptr[2]);
+      if ((class_bitset[chr >> 3] & (1u << (chr & 7))) != 0) return FALSE;
+      break;
+
+#ifdef SUPPORT_WIDE_CHARS
+      case OP_XCLASS:
+      if (PRIV(xclass)(chr, (list_ptr == list ? code : base_end) -
+          list_ptr[2] + LINK_SIZE, utf)) return FALSE;
+      break;
+#endif
+
+      default:
+      return FALSE;
+      }
+
+    chr_ptr++;
+    }
+  while(*chr_ptr != NOTACHAR);
+
+  /* At least one character must be matched from this opcode. */
+
+  if (list[1] == 0) return TRUE;
+  }
+
+/* Control never reaches here. There used to be a fail-save return FALSE; here,
+but some compilers complain about an unreachable statement. */
+}
+
+
+
+/*************************************************
+*    Scan compiled regex for auto-possession     *
+*************************************************/
+
+/* Replaces single character iterations with their possessive alternatives
+if appropriate. This function modifies the compiled opcode! Hitting a
+non-existent opcode may indicate a bug in PCRE2, but it can also be caused if a
+bad UTF string was compiled with PCRE2_NO_UTF_CHECK. The rec_limit catches
+overly complicated or large patterns. In these cases, the check just stops,
+leaving the remainder of the pattern unpossessified.
+
+Arguments:
+  code        points to start of the byte code
+  cb          compile data block
+
+Returns:      0 for success
+              -1 if a non-existant opcode is encountered
+*/
+
+int
+PRIV(auto_possessify)(PCRE2_UCHAR *code, const compile_block *cb)
+{
+PCRE2_UCHAR c;
+PCRE2_SPTR end;
+PCRE2_UCHAR *repeat_opcode;
+uint32_t list[8];
+int rec_limit = 1000;  /* Was 10,000 but clang+ASAN uses a lot of stack. */
+BOOL utf = (cb->external_options & PCRE2_UTF) != 0;
+BOOL ucp = (cb->external_options & PCRE2_UCP) != 0;
+
+for (;;)
+  {
+  c = *code;
+
+  if (c >= OP_TABLE_LENGTH) return -1;   /* Something gone wrong */
+
+  if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
+    {
+    c -= get_repeat_base(c) - OP_STAR;
+    end = (c <= OP_MINUPTO) ?
+      get_chr_property_list(code, utf, ucp, cb->fcc, list) : NULL;
+    list[1] = c == OP_STAR || c == OP_PLUS || c == OP_QUERY || c == OP_UPTO;
+
+    if (end != NULL && compare_opcodes(end, utf, ucp, cb, list, end,
+        &rec_limit))
+      {
+      switch(c)
+        {
+        case OP_STAR:
+        *code += OP_POSSTAR - OP_STAR;
+        break;
+
+        case OP_MINSTAR:
+        *code += OP_POSSTAR - OP_MINSTAR;
+        break;
+
+        case OP_PLUS:
+        *code += OP_POSPLUS - OP_PLUS;
+        break;
+
+        case OP_MINPLUS:
+        *code += OP_POSPLUS - OP_MINPLUS;
+        break;
+
+        case OP_QUERY:
+        *code += OP_POSQUERY - OP_QUERY;
+        break;
+
+        case OP_MINQUERY:
+        *code += OP_POSQUERY - OP_MINQUERY;
+        break;
+
+        case OP_UPTO:
+        *code += OP_POSUPTO - OP_UPTO;
+        break;
+
+        case OP_MINUPTO:
+        *code += OP_POSUPTO - OP_MINUPTO;
+        break;
+        }
+      }
+    c = *code;
+    }
+  else if (c == OP_CLASS || c == OP_NCLASS || c == OP_XCLASS)
+    {
+#ifdef SUPPORT_WIDE_CHARS
+    if (c == OP_XCLASS)
+      repeat_opcode = code + GET(code, 1);
+    else
+#endif
+      repeat_opcode = code + 1 + (32 / sizeof(PCRE2_UCHAR));
+
+    c = *repeat_opcode;
+    if (c >= OP_CRSTAR && c <= OP_CRMINRANGE)
+      {
+      /* The return from get_chr_property_list() will never be NULL when
+      *code (aka c) is one of the three class opcodes. However, gcc with
+      -fanalyzer notes that a NULL return is possible, and grumbles. Hence we
+      put in a check. */
+
+      end = get_chr_property_list(code, utf, ucp, cb->fcc, list);
+      list[1] = (c & 1) == 0;
+
+      if (end != NULL &&
+          compare_opcodes(end, utf, ucp, cb, list, end, &rec_limit))
+        {
+        switch (c)
+          {
+          case OP_CRSTAR:
+          case OP_CRMINSTAR:
+          *repeat_opcode = OP_CRPOSSTAR;
+          break;
+
+          case OP_CRPLUS:
+          case OP_CRMINPLUS:
+          *repeat_opcode = OP_CRPOSPLUS;
+          break;
+
+          case OP_CRQUERY:
+          case OP_CRMINQUERY:
+          *repeat_opcode = OP_CRPOSQUERY;
+          break;
+
+          case OP_CRRANGE:
+          case OP_CRMINRANGE:
+          *repeat_opcode = OP_CRPOSRANGE;
+          break;
+          }
+        }
+      }
+    c = *code;
+    }
+
+  switch(c)
+    {
+    case OP_END:
+    return 0;
+
+    case OP_TYPESTAR:
+    case OP_TYPEMINSTAR:
+    case OP_TYPEPLUS:
+    case OP_TYPEMINPLUS:
+    case OP_TYPEQUERY:
+    case OP_TYPEMINQUERY:
+    case OP_TYPEPOSSTAR:
+    case OP_TYPEPOSPLUS:
+    case OP_TYPEPOSQUERY:
+    if (code[1] == OP_PROP || code[1] == OP_NOTPROP) code += 2;
+    break;
+
+    case OP_TYPEUPTO:
+    case OP_TYPEMINUPTO:
+    case OP_TYPEEXACT:
+    case OP_TYPEPOSUPTO:
+    if (code[1 + IMM2_SIZE] == OP_PROP || code[1 + IMM2_SIZE] == OP_NOTPROP)
+      code += 2;
+    break;
+
+    case OP_CALLOUT_STR:
+    code += GET(code, 1 + 2*LINK_SIZE);
+    break;
+
+#ifdef SUPPORT_WIDE_CHARS
+    case OP_XCLASS:
+    code += GET(code, 1);
+    break;
+#endif
+
+    case OP_MARK:
+    case OP_COMMIT_ARG:
+    case OP_PRUNE_ARG:
+    case OP_SKIP_ARG:
+    case OP_THEN_ARG:
+    code += code[1];
+    break;
+    }
+
+  /* Add in the fixed length from the table */
+
+  code += PRIV(OP_lengths)[c];
+
+  /* In UTF-8 and UTF-16 modes, opcodes that are followed by a character may be
+  followed by a multi-byte character. The length in the table is a minimum, so
+  we have to arrange to skip the extra code units. */
+
+#ifdef MAYBE_UTF_MULTI
+  if (utf) switch(c)
+    {
+    case OP_CHAR:
+    case OP_CHARI:
+    case OP_NOT:
+    case OP_NOTI:
+    case OP_STAR:
+    case OP_MINSTAR:
+    case OP_PLUS:
+    case OP_MINPLUS:
+    case OP_QUERY:
+    case OP_MINQUERY:
+    case OP_UPTO:
+    case OP_MINUPTO:
+    case OP_EXACT:
+    case OP_POSSTAR:
+    case OP_POSPLUS:
+    case OP_POSQUERY:
+    case OP_POSUPTO:
+    case OP_STARI:
+    case OP_MINSTARI:
+    case OP_PLUSI:
+    case OP_MINPLUSI:
+    case OP_QUERYI:
+    case OP_MINQUERYI:
+    case OP_UPTOI:
+    case OP_MINUPTOI:
+    case OP_EXACTI:
+    case OP_POSSTARI:
+    case OP_POSPLUSI:
+    case OP_POSQUERYI:
+    case OP_POSUPTOI:
+    case OP_NOTSTAR:
+    case OP_NOTMINSTAR:
+    case OP_NOTPLUS:
+    case OP_NOTMINPLUS:
+    case OP_NOTQUERY:
+    case OP_NOTMINQUERY:
+    case OP_NOTUPTO:
+    case OP_NOTMINUPTO:
+    case OP_NOTEXACT:
+    case OP_NOTPOSSTAR:
+    case OP_NOTPOSPLUS:
+    case OP_NOTPOSQUERY:
+    case OP_NOTPOSUPTO:
+    case OP_NOTSTARI:
+    case OP_NOTMINSTARI:
+    case OP_NOTPLUSI:
+    case OP_NOTMINPLUSI:
+    case OP_NOTQUERYI:
+    case OP_NOTMINQUERYI:
+    case OP_NOTUPTOI:
+    case OP_NOTMINUPTOI:
+    case OP_NOTEXACTI:
+    case OP_NOTPOSSTARI:
+    case OP_NOTPOSPLUSI:
+    case OP_NOTPOSQUERYI:
+    case OP_NOTPOSUPTOI:
+    if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
+    break;
+    }
+#else
+  (void)(utf);  /* Keep compiler happy by referencing function argument */
+#endif  /* SUPPORT_WIDE_CHARS */
+  }
+}
+
+/* End of pcre2_auto_possess.c */