tpy-lang 0.3.0.dev0__py3-none-any.whl

tpyc/_data/runtime/cpp/third_party/pcre2/src/pcre2_valid_utf.c

@@ -0,0 +1,398 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+     Original API code Copyright (c) 1997-2012 University of Cambridge
+          New API code Copyright (c) 2016-2020 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+
+/* This module contains an internal function for validating UTF character
+strings. This file is also #included by the pcre2test program, which uses
+macros to change names from _pcre2_xxx to xxxx, thereby avoiding name clashes
+with the library. In this case, PCRE2_PCRE2TEST is defined. */
+
+#ifndef PCRE2_PCRE2TEST           /* We're compiling the library */
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+#include "pcre2_internal.h"
+#endif /* PCRE2_PCRE2TEST */
+
+
+#ifndef SUPPORT_UNICODE
+/*************************************************
+*  Dummy function when Unicode is not supported  *
+*************************************************/
+
+/* This function should never be called when Unicode is not supported. */
+
+int
+PRIV(valid_utf)(PCRE2_SPTR string, PCRE2_SIZE length, PCRE2_SIZE *erroroffset)
+{
+(void)string;
+(void)length;
+(void)erroroffset;
+return 0;
+}
+#else  /* UTF is supported */
+
+
+
+/*************************************************
+*           Validate a UTF string                *
+*************************************************/
+
+/* This function is called (optionally) at the start of compile or match, to
+check that a supposed UTF string is actually valid. The early check means
+that subsequent code can assume it is dealing with a valid string. The check
+can be turned off for maximum performance, but the consequences of supplying an
+invalid string are then undefined.
+
+Arguments:
+  string       points to the string
+  length       length of string
+  errp         pointer to an error position offset variable
+
+Returns:       == 0    if the string is a valid UTF string
+               != 0    otherwise, setting the offset of the bad character
+*/
+
+int
+PRIV(valid_utf)(PCRE2_SPTR string, PCRE2_SIZE length, PCRE2_SIZE *erroroffset)
+{
+PCRE2_SPTR p;
+uint32_t c;
+
+/* ----------------- Check a UTF-8 string ----------------- */
+
+#if PCRE2_CODE_UNIT_WIDTH == 8
+
+/* Originally, this function checked according to RFC 2279, allowing for values
+in the range 0 to 0x7fffffff, up to 6 bytes long, but ensuring that they were
+in the canonical format. Once somebody had pointed out RFC 3629 to me (it
+obsoletes 2279), additional restrictions were applied. The values are now
+limited to be between 0 and 0x0010ffff, no more than 4 bytes long, and the
+subrange 0xd000 to 0xdfff is excluded. However, the format of 5-byte and 6-byte
+characters is still checked. Error returns are as follows:
+
+PCRE2_ERROR_UTF8_ERR1   Missing 1 byte at the end of the string
+PCRE2_ERROR_UTF8_ERR2   Missing 2 bytes at the end of the string
+PCRE2_ERROR_UTF8_ERR3   Missing 3 bytes at the end of the string
+PCRE2_ERROR_UTF8_ERR4   Missing 4 bytes at the end of the string
+PCRE2_ERROR_UTF8_ERR5   Missing 5 bytes at the end of the string
+PCRE2_ERROR_UTF8_ERR6   2nd-byte's two top bits are not 0x80
+PCRE2_ERROR_UTF8_ERR7   3rd-byte's two top bits are not 0x80
+PCRE2_ERROR_UTF8_ERR8   4th-byte's two top bits are not 0x80
+PCRE2_ERROR_UTF8_ERR9   5th-byte's two top bits are not 0x80
+PCRE2_ERROR_UTF8_ERR10  6th-byte's two top bits are not 0x80
+PCRE2_ERROR_UTF8_ERR11  5-byte character is not permitted by RFC 3629
+PCRE2_ERROR_UTF8_ERR12  6-byte character is not permitted by RFC 3629
+PCRE2_ERROR_UTF8_ERR13  4-byte character with value > 0x10ffff is not permitted
+PCRE2_ERROR_UTF8_ERR14  3-byte character with value 0xd800-0xdfff is not permitted
+PCRE2_ERROR_UTF8_ERR15  Overlong 2-byte sequence
+PCRE2_ERROR_UTF8_ERR16  Overlong 3-byte sequence
+PCRE2_ERROR_UTF8_ERR17  Overlong 4-byte sequence
+PCRE2_ERROR_UTF8_ERR18  Overlong 5-byte sequence (won't ever occur)
+PCRE2_ERROR_UTF8_ERR19  Overlong 6-byte sequence (won't ever occur)
+PCRE2_ERROR_UTF8_ERR20  Isolated 0x80 byte (not within UTF-8 character)
+PCRE2_ERROR_UTF8_ERR21  Byte with the illegal value 0xfe or 0xff
+*/
+
+for (p = string; length > 0; p++)
+  {
+  uint32_t ab, d;
+
+  c = *p;
+  length--;
+
+  if (c < 128) continue;                /* ASCII character */
+
+  if (c < 0xc0)                         /* Isolated 10xx xxxx byte */
+    {
+    *erroroffset = (PCRE2_SIZE)(p - string);
+    return PCRE2_ERROR_UTF8_ERR20;
+    }
+
+  if (c >= 0xfe)                        /* Invalid 0xfe or 0xff bytes */
+    {
+    *erroroffset = (PCRE2_SIZE)(p - string);
+    return PCRE2_ERROR_UTF8_ERR21;
+    }
+
+  ab = PRIV(utf8_table4)[c & 0x3f];     /* Number of additional bytes (1-5) */
+  if (length < ab)                      /* Missing bytes */
+    {
+    *erroroffset = (PCRE2_SIZE)(p - string);
+    switch(ab - length)
+      {
+      case 1: return PCRE2_ERROR_UTF8_ERR1;
+      case 2: return PCRE2_ERROR_UTF8_ERR2;
+      case 3: return PCRE2_ERROR_UTF8_ERR3;
+      case 4: return PCRE2_ERROR_UTF8_ERR4;
+      case 5: return PCRE2_ERROR_UTF8_ERR5;
+      }
+    }
+  length -= ab;                         /* Length remaining */
+
+  /* Check top bits in the second byte */
+
+  if (((d = *(++p)) & 0xc0) != 0x80)
+    {
+    *erroroffset = (PCRE2_SIZE)(p - string) - 1;
+    return PCRE2_ERROR_UTF8_ERR6;
+    }
+
+  /* For each length, check that the remaining bytes start with the 0x80 bit
+  set and not the 0x40 bit. Then check for an overlong sequence, and for the
+  excluded range 0xd800 to 0xdfff. */
+
+  switch (ab)
+    {
+    /* 2-byte character. No further bytes to check for 0x80. Check first byte
+    for for xx00 000x (overlong sequence). */
+
+    case 1: if ((c & 0x3e) == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 1;
+      return PCRE2_ERROR_UTF8_ERR15;
+      }
+    break;
+
+    /* 3-byte character. Check third byte for 0x80. Then check first 2 bytes
+      for 1110 0000, xx0x xxxx (overlong sequence) or
+          1110 1101, 1010 xxxx (0xd800 - 0xdfff) */
+
+    case 2:
+    if ((*(++p) & 0xc0) != 0x80)     /* Third byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR7;
+      }
+    if (c == 0xe0 && (d & 0x20) == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR16;
+      }
+    if (c == 0xed && d >= 0xa0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR14;
+      }
+    break;
+
+    /* 4-byte character. Check 3rd and 4th bytes for 0x80. Then check first 2
+       bytes for for 1111 0000, xx00 xxxx (overlong sequence), then check for a
+       character greater than 0x0010ffff (f4 8f bf bf) */
+
+    case 3:
+    if ((*(++p) & 0xc0) != 0x80)     /* Third byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR7;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Fourth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 3;
+      return PCRE2_ERROR_UTF8_ERR8;
+      }
+    if (c == 0xf0 && (d & 0x30) == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 3;
+      return PCRE2_ERROR_UTF8_ERR17;
+      }
+    if (c > 0xf4 || (c == 0xf4 && d > 0x8f))
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 3;
+      return PCRE2_ERROR_UTF8_ERR13;
+      }
+    break;
+
+    /* 5-byte and 6-byte characters are not allowed by RFC 3629, and will be
+    rejected by the length test below. However, we do the appropriate tests
+    here so that overlong sequences get diagnosed, and also in case there is
+    ever an option for handling these larger code points. */
+
+    /* 5-byte character. Check 3rd, 4th, and 5th bytes for 0x80. Then check for
+    1111 1000, xx00 0xxx */
+
+    case 4:
+    if ((*(++p) & 0xc0) != 0x80)     /* Third byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR7;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Fourth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 3;
+      return PCRE2_ERROR_UTF8_ERR8;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Fifth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 4;
+      return PCRE2_ERROR_UTF8_ERR9;
+      }
+    if (c == 0xf8 && (d & 0x38) == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 4;
+      return PCRE2_ERROR_UTF8_ERR18;
+      }
+    break;
+
+    /* 6-byte character. Check 3rd-6th bytes for 0x80. Then check for
+    1111 1100, xx00 00xx. */
+
+    case 5:
+    if ((*(++p) & 0xc0) != 0x80)     /* Third byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 2;
+      return PCRE2_ERROR_UTF8_ERR7;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Fourth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 3;
+      return PCRE2_ERROR_UTF8_ERR8;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Fifth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 4;
+      return PCRE2_ERROR_UTF8_ERR9;
+      }
+    if ((*(++p) & 0xc0) != 0x80)     /* Sixth byte */
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 5;
+      return PCRE2_ERROR_UTF8_ERR10;
+      }
+    if (c == 0xfc && (d & 0x3c) == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 5;
+      return PCRE2_ERROR_UTF8_ERR19;
+      }
+    break;
+    }
+
+  /* Character is valid under RFC 2279, but 4-byte and 5-byte characters are
+  excluded by RFC 3629. The pointer p is currently at the last byte of the
+  character. */
+
+  if (ab > 3)
+    {
+    *erroroffset = (PCRE2_SIZE)(p - string) - ab;
+    return (ab == 4)? PCRE2_ERROR_UTF8_ERR11 : PCRE2_ERROR_UTF8_ERR12;
+    }
+  }
+return 0;
+
+
+/* ----------------- Check a UTF-16 string ----------------- */
+
+#elif PCRE2_CODE_UNIT_WIDTH == 16
+
+/* There's not so much work, nor so many errors, for UTF-16.
+PCRE2_ERROR_UTF16_ERR1  Missing low surrogate at the end of the string
+PCRE2_ERROR_UTF16_ERR2  Invalid low surrogate
+PCRE2_ERROR_UTF16_ERR3  Isolated low surrogate
+*/
+
+for (p = string; length > 0; p++)
+  {
+  c = *p;
+  length--;
+
+  if ((c & 0xf800) != 0xd800)
+    {
+    /* Normal UTF-16 code point. Neither high nor low surrogate. */
+    }
+  else if ((c & 0x0400) == 0)
+    {
+    /* High surrogate. Must be a followed by a low surrogate. */
+    if (length == 0)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string);
+      return PCRE2_ERROR_UTF16_ERR1;
+      }
+    p++;
+    length--;
+    if ((*p & 0xfc00) != 0xdc00)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string) - 1;
+      return PCRE2_ERROR_UTF16_ERR2;
+      }
+    }
+  else
+    {
+    /* Isolated low surrogate. Always an error. */
+    *erroroffset = (PCRE2_SIZE)(p - string);
+    return PCRE2_ERROR_UTF16_ERR3;
+    }
+  }
+return 0;
+
+
+
+/* ----------------- Check a UTF-32 string ----------------- */
+
+#else
+
+/* There is very little to do for a UTF-32 string.
+PCRE2_ERROR_UTF32_ERR1  Surrogate character
+PCRE2_ERROR_UTF32_ERR2  Character > 0x10ffff
+*/
+
+for (p = string; length > 0; length--, p++)
+  {
+  c = *p;
+  if ((c & 0xfffff800u) != 0xd800u)
+    {
+    /* Normal UTF-32 code point. Neither high nor low surrogate. */
+    if (c > 0x10ffffu)
+      {
+      *erroroffset = (PCRE2_SIZE)(p - string);
+      return PCRE2_ERROR_UTF32_ERR2;
+      }
+    }
+  else
+    {
+    /* A surrogate */
+    *erroroffset = (PCRE2_SIZE)(p - string);
+    return PCRE2_ERROR_UTF32_ERR1;
+    }
+  }
+return 0;
+#endif  /* CODE_UNIT_WIDTH */
+}
+#endif  /* SUPPORT_UNICODE */
+
+/* End of pcre2_valid_utf.c */

tpyc/_data/runtime/cpp/third_party/pcre2/src/pcre2_xclass.c

@@ -0,0 +1,308 @@
+/*************************************************
+*      Perl-Compatible Regular Expressions       *
+*************************************************/
+
+/* PCRE is a library of functions to support regular expressions whose syntax
+and semantics are as close as possible to those of the Perl 5 language.
+
+                       Written by Philip Hazel
+     Original API code Copyright (c) 1997-2012 University of Cambridge
+          New API code Copyright (c) 2016-2023 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+    * Neither the name of the University of Cambridge nor the names of its
+      contributors may be used to endorse or promote products derived from
+      this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+/* This module contains an internal function that is used to match an extended
+class. It is used by pcre2_auto_possessify() and by both pcre2_match() and
+pcre2_def_match(). */
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+
+#include "pcre2_internal.h"
+
+/*************************************************
+*       Match character against an XCLASS        *
+*************************************************/
+
+/* This function is called to match a character against an extended class that
+might contain codepoints above 255 and/or Unicode properties.
+
+Arguments:
+  c           the character
+  data        points to the flag code unit of the XCLASS data
+  utf         TRUE if in UTF mode
+
+Returns:      TRUE if character matches, else FALSE
+*/
+
+BOOL
+PRIV(xclass)(uint32_t c, PCRE2_SPTR data, BOOL utf)
+{
+PCRE2_UCHAR t;
+BOOL negated = (*data & XCL_NOT) != 0;
+
+#if PCRE2_CODE_UNIT_WIDTH == 8
+/* In 8 bit mode, this must always be TRUE. Help the compiler to know that. */
+utf = TRUE;
+#endif
+
+/* Code points < 256 are matched against a bitmap, if one is present. If not,
+we still carry on, because there may be ranges that start below 256 in the
+additional data. */
+
+if (c < 256)
+  {
+  if ((*data & XCL_HASPROP) == 0)
+    {
+    if ((*data & XCL_MAP) == 0) return negated;
+    return (((uint8_t *)(data + 1))[c/8] & (1u << (c&7))) != 0;
+    }
+  if ((*data & XCL_MAP) != 0 &&
+    (((uint8_t *)(data + 1))[c/8] & (1u << (c&7))) != 0)
+    return !negated; /* char found */
+  }
+
+/* First skip the bit map if present. Then match against the list of Unicode
+properties or large chars or ranges that end with a large char. We won't ever
+encounter XCL_PROP or XCL_NOTPROP when UTF support is not compiled. */
+
+if ((*data++ & XCL_MAP) != 0) data += 32 / sizeof(PCRE2_UCHAR);
+
+while ((t = *data++) != XCL_END)
+  {
+  uint32_t x, y;
+  if (t == XCL_SINGLE)
+    {
+#ifdef SUPPORT_UNICODE
+    if (utf)
+      {
+      GETCHARINC(x, data); /* macro generates multiple statements */
+      }
+    else
+#endif
+    x = *data++;
+    if (c == x) return !negated;
+    }
+  else if (t == XCL_RANGE)
+    {
+#ifdef SUPPORT_UNICODE
+    if (utf)
+      {
+      GETCHARINC(x, data); /* macro generates multiple statements */
+      GETCHARINC(y, data); /* macro generates multiple statements */
+      }
+    else
+#endif
+      {
+      x = *data++;
+      y = *data++;
+      }
+    if (c >= x && c <= y) return !negated;
+    }
+
+#ifdef SUPPORT_UNICODE
+  else  /* XCL_PROP & XCL_NOTPROP */
+    {
+    int chartype;
+    const ucd_record *prop = GET_UCD(c);
+    BOOL isprop = t == XCL_PROP;
+    BOOL ok;
+
+    switch(*data)
+      {
+      case PT_ANY:
+      if (isprop) return !negated;
+      break;
+
+      case PT_LAMP:
+      chartype = prop->chartype;
+      if ((chartype == ucp_Lu || chartype == ucp_Ll ||
+           chartype == ucp_Lt) == isprop) return !negated;
+      break;
+
+      case PT_GC:
+      if ((data[1] == PRIV(ucp_gentype)[prop->chartype]) == isprop)
+        return !negated;
+      break;
+
+      case PT_PC:
+      if ((data[1] == prop->chartype) == isprop) return !negated;
+      break;
+
+      case PT_SC:
+      if ((data[1] == prop->script) == isprop) return !negated;
+      break;
+
+      case PT_SCX:
+      ok = (data[1] == prop->script ||
+            MAPBIT(PRIV(ucd_script_sets) + UCD_SCRIPTX_PROP(prop), data[1]) != 0);
+      if (ok == isprop) return !negated;
+      break;
+
+      case PT_ALNUM:
+      chartype = prop->chartype;
+      if ((PRIV(ucp_gentype)[chartype] == ucp_L ||
+           PRIV(ucp_gentype)[chartype] == ucp_N) == isprop)
+        return !negated;
+      break;
+
+      /* Perl space used to exclude VT, but from Perl 5.18 it is included,
+      which means that Perl space and POSIX space are now identical. PCRE
+      was changed at release 8.34. */
+
+      case PT_SPACE:    /* Perl space */
+      case PT_PXSPACE:  /* POSIX space */
+      switch(c)
+        {
+        HSPACE_CASES:
+        VSPACE_CASES:
+        if (isprop) return !negated;
+        break;
+
+        default:
+        if ((PRIV(ucp_gentype)[prop->chartype] == ucp_Z) == isprop)
+          return !negated;
+        break;
+        }
+      break;
+
+      case PT_WORD:
+      chartype = prop->chartype;
+      if ((PRIV(ucp_gentype)[chartype] == ucp_L ||
+           PRIV(ucp_gentype)[chartype] == ucp_N ||
+           chartype == ucp_Mn || chartype == ucp_Pc) == isprop)
+        return !negated;
+      break;
+
+      case PT_UCNC:
+      if (c < 0xa0)
+        {
+        if ((c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT ||
+             c == CHAR_GRAVE_ACCENT) == isprop)
+          return !negated;
+        }
+      else
+        {
+        if ((c < 0xd800 || c > 0xdfff) == isprop)
+          return !negated;
+        }
+      break;
+
+      case PT_BIDICL:
+      if ((UCD_BIDICLASS_PROP(prop) == data[1]) == isprop)
+        return !negated;
+      break;
+
+      case PT_BOOL:
+      ok = MAPBIT(PRIV(ucd_boolprop_sets) +
+        UCD_BPROPS_PROP(prop), data[1]) != 0;
+      if (ok == isprop) return !negated;
+      break;
+
+      /* The following three properties can occur only in an XCLASS, as there
+      is no \p or \P coding for them. */
+
+      /* Graphic character. Implement this as not Z (space or separator) and
+      not C (other), except for Cf (format) with a few exceptions. This seems
+      to be what Perl does. The exceptional characters are:
+
+      U+061C           Arabic Letter Mark
+      U+180E           Mongolian Vowel Separator
+      U+2066 - U+2069  Various "isolate"s
+      */
+
+      case PT_PXGRAPH:
+      chartype = prop->chartype;
+      if ((PRIV(ucp_gentype)[chartype] != ucp_Z &&
+            (PRIV(ucp_gentype)[chartype] != ucp_C ||
+              (chartype == ucp_Cf &&
+                c != 0x061c && c != 0x180e && (c < 0x2066 || c > 0x2069))
+         )) == isprop)
+        return !negated;
+      break;
+
+      /* Printable character: same as graphic, with the addition of Zs, i.e.
+      not Zl and not Zp, and U+180E. */
+
+      case PT_PXPRINT:
+      chartype = prop->chartype;
+      if ((chartype != ucp_Zl &&
+           chartype != ucp_Zp &&
+            (PRIV(ucp_gentype)[chartype] != ucp_C ||
+              (chartype == ucp_Cf &&
+                c != 0x061c && (c < 0x2066 || c > 0x2069))
+         )) == isprop)
+        return !negated;
+      break;
+
+      /* Punctuation: all Unicode punctuation, plus ASCII characters that
+      Unicode treats as symbols rather than punctuation, for Perl
+      compatibility (these are $+<=>^`|~). */
+
+      case PT_PXPUNCT:
+      chartype = prop->chartype;
+      if ((PRIV(ucp_gentype)[chartype] == ucp_P ||
+            (c < 128 && PRIV(ucp_gentype)[chartype] == ucp_S)) == isprop)
+        return !negated;
+      break;
+
+      /* Perl has two sets of hex digits */
+
+      case PT_PXXDIGIT:
+      if (((c >= CHAR_0 && c <= CHAR_9) ||
+           (c >= CHAR_A && c <= CHAR_F) ||
+           (c >= CHAR_a && c <= CHAR_f) ||
+           (c >= 0xff10 && c <= 0xff19) ||  /* Fullwidth digits */
+           (c >= 0xff21 && c <= 0xff26) ||  /* Fullwidth letters */
+           (c >= 0xff41 && c <= 0xff46)) == isprop)
+        return !negated;
+      break;
+
+      /* This should never occur, but compilers may mutter if there is no
+      default. */
+
+      default:
+      return FALSE;
+      }
+
+    data += 2;
+    }
+#else
+  (void)utf;  /* Avoid compiler warning */
+#endif  /* SUPPORT_UNICODE */
+  }
+
+return negated;   /* char did not match */
+}
+
+/* End of pcre2_xclass.c */