homeassistant 2025.9.3__py3-none-any.whl → 2025.9.4__py3-none-any.whl

homeassistant/components/elkm1/translations/tr.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "Bu adrese sahip bir ElkM1 zaten yap\u0131land\u0131r\u0131lm\u0131\u015ft\u0131r",
-            "already_configured": "Bu \u00f6nek ile bir ElkM1 zaten yap\u0131land\u0131r\u0131lm\u0131\u015ft\u0131r",
             "already_in_progress": "Yap\u0131land\u0131rma ak\u0131\u015f\u0131 zaten devam ediyor",
             "cannot_connect": "Ba\u011flanma hatas\u0131",
             "invalid_auth": "Ge\u00e7ersiz kimlik do\u011frulama",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "Seri yoluyla ba\u011flan\u0131l\u0131yorsa IP adresi veya etki alan\u0131 veya seri ba\u011flant\u0131 noktas\u0131.",
                     "password": "\u015eifre",
-                    "prefix": "Benzersiz bir \u00f6nek (yaln\u0131zca bir ElkM1'iniz varsa bo\u015f b\u0131rak\u0131n).",
                     "protocol": "Protokol",
-                    "temperature_unit": "ElkM1'in kulland\u0131\u011f\u0131 s\u0131cakl\u0131k birimi.",
                     "username": "Kullan\u0131c\u0131 Ad\u0131"
                 },
                 "description": "Adres dizesi, 'g\u00fcvenli' ve 'g\u00fcvenli olmayan' i\u00e7in 'adres[:port]' bi\u00e7iminde olmal\u0131d\u0131r. \u00d6rnek: '192.168.1.1'. Ba\u011flant\u0131 noktas\u0131 iste\u011fe ba\u011fl\u0131d\u0131r ve varsay\u0131lan olarak 'g\u00fcvenli olmayan' i\u00e7in 2101 ve 'g\u00fcvenli' i\u00e7in 2601'dir. Seri protokol i\u00e7in adres 'tty[:baud]' bi\u00e7iminde olmal\u0131d\u0131r. \u00d6rnek: '/dev/ttyS1'. Baud iste\u011fe ba\u011fl\u0131d\u0131r ve varsay\u0131lan olarak 115200'd\u00fcr.",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "ElkM1'i anl\u0131k ev modunda devreye al\u0131r.",
             "fields": {
                 "code": {
                     "description": "Alarm kontrol panelini devreye sokmak i\u00e7in alarm kodu.",
@@ -58,7 +53,6 @@
             "name": "Alarm an\u0131nda eve gelir"
         },
         "alarm_arm_night_instant": {
-            "description": "ElkM1'i gece modunda devreye al\u0131r.",
             "fields": {
                 "code": {
                     "description": "Alarm kontrol panelini devreye sokmak i\u00e7in alarm kodu.",
@@ -68,7 +62,6 @@
             "name": "Gecede alarm etkin"
         },
         "alarm_arm_vacation": {
-            "description": "ElkM1'i tatil modunda silahland\u0131r\u0131r.",
             "fields": {
                 "code": {
                     "description": "Alarm kontrol panelini devreye sokmak i\u00e7in alarm kodu.",
@@ -98,7 +91,6 @@
             "name": "Alarm temizleme atlatmas\u0131"
         },
         "alarm_display_message": {
-            "description": "Bir alan i\u00e7in t\u00fcm ElkM1 tu\u015f tak\u0131mlar\u0131nda bir mesaj g\u00f6r\u00fcnt\u00fcler.",
             "fields": {
                 "beep": {
                     "description": "0=bip sesi yok, 1=bip sesi.",
@@ -162,7 +154,6 @@
             "name": "Zaman ayarla"
         },
         "speak_phrase": {
-            "description": "Bir c\u00fcmle s\u00f6yler. ElkM1 ASCII Protokol belgelerindeki ifadelerin listesine bak\u0131n.",
             "fields": {
                 "number": {
                     "description": "Konu\u015fmak i\u00e7in ifade numaras\u0131.",
@@ -176,7 +167,6 @@
             "name": "\u0130fadeyi konu\u015f"
         },
         "speak_word": {
-            "description": "Bir s\u00f6zc\u00fck s\u00f6yler. ElkM1 ASCII Protokol\u00fc belgelerindeki s\u00f6zc\u00fck listesine bak\u0131n.",
             "fields": {
                 "number": {
                     "description": "Konu\u015fmak i\u00e7in kelime numaras\u0131.",

homeassistant/components/elkm1/translations/uk.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "\u041d\u0430\u043b\u0430\u0448\u0442\u0443\u0432\u0430\u043d\u043d\u044f \u043f\u0440\u0438\u0441\u0442\u0440\u043e\u044e \u0437 \u0446\u0456\u0454\u044e \u0430\u0434\u0440\u0435\u0441\u043e\u044e \u0432\u0436\u0435 \u0432\u0438\u043a\u043e\u043d\u0430\u043d\u0435.",
-            "already_configured": "\u041d\u0430\u043b\u0430\u0448\u0442\u0443\u0432\u0430\u043d\u043d\u044f \u043f\u0440\u0438\u0441\u0442\u0440\u043e\u044e \u0437 \u0446\u0438\u043c \u043f\u0440\u0435\u0444\u0456\u043a\u0441\u043e\u043c \u0432\u0436\u0435 \u0432\u0438\u043a\u043e\u043d\u0430\u043d\u0435.",
             "already_in_progress": "\u041f\u0440\u043e\u0446\u0435\u0441 \u043d\u0430\u043b\u0430\u0448\u0442\u0443\u0432\u0430\u043d\u043d\u044f \u0432\u0436\u0435 \u0442\u0440\u0438\u0432\u0430\u0454.",
             "cannot_connect": "\u041d\u0435 \u0432\u0434\u0430\u043b\u043e\u0441\u044f \u043f\u0456\u0434'\u0454\u0434\u043d\u0430\u0442\u0438\u0441\u044f",
             "invalid_auth": "\u041d\u0435\u0432\u0456\u0440\u043d\u0430 \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0456\u043a\u0430\u0446\u0456\u044f",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "IP-\u0430\u0434\u0440\u0435\u0441\u0430 \u0430\u0431\u043e \u0434\u043e\u043c\u0435\u043d, \u0430\u0431\u043e \u043f\u043e\u0441\u043b\u0456\u0434\u043e\u0432\u043d\u0438\u0439 \u043f\u043e\u0440\u0442, \u044f\u043a\u0449\u043e \u0432\u0438 \u043f\u0456\u0434\u043a\u043b\u044e\u0447\u0430\u0454\u0442\u0435\u0441\u044f \u0447\u0435\u0440\u0435\u0437 \u043f\u043e\u0441\u043b\u0456\u0434\u043e\u0432\u043d\u0438\u0439 \u043f\u043e\u0440\u0442.",
                     "password": "\u041f\u0430\u0440\u043e\u043b\u044c",
-                    "prefix": "\u0423\u043d\u0456\u043a\u0430\u043b\u044c\u043d\u0438\u0439 \u043f\u0440\u0435\u0444\u0456\u043a\u0441 (\u0437\u0430\u043b\u0438\u0448\u0442\u0435 \u043f\u043e\u0440\u043e\u0436\u043d\u0456\u043c, \u044f\u043a\u0449\u043e \u0443 \u0432\u0430\u0441 \u043b\u0438\u0448\u0435 \u043e\u0434\u0438\u043d ElkM1).",
                     "protocol": "\u041f\u0440\u043e\u0442\u043e\u043a\u043e\u043b",
-                    "temperature_unit": "\u041e\u0434\u0438\u043d\u0438\u0446\u044f \u0432\u0438\u043c\u0456\u0440\u0443 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0438, \u044f\u043a\u0443 \u0432\u0438\u043a\u043e\u0440\u0438\u0441\u0442\u043e\u0432\u0443\u0454 ElkM1.",
                     "username": "\u0406\u043c'\u044f \u043a\u043e\u0440\u0438\u0441\u0442\u0443\u0432\u0430\u0447\u0430"
                 },
                 "description": "\u0410\u0434\u0440\u0435\u0441\u043d\u0438\u0439 \u0440\u044f\u0434\u043e\u043a \u043f\u043e\u0432\u0438\u043d\u0435\u043d \u043c\u0430\u0442\u0438 \u0432\u0438\u0433\u043b\u044f\u0434 'address[:port]' \u0434\u043b\u044f \"secure\" \u0456 \"non-secure\" \u0437'\u0454\u0434\u043d\u0430\u043d\u044c. \u041f\u0440\u0438\u043a\u043b\u0430\u0434: '192.168.1.1'. \u041f\u043e\u0440\u0442 \u043d\u0435 \u0454 \u043e\u0431\u043e\u0432'\u044f\u0437\u043a\u043e\u0432\u0438\u043c \u0456 \u0437\u0430 \u0437\u0430\u043c\u043e\u0432\u0447\u0443\u0432\u0430\u043d\u043d\u044f\u043c \u0434\u043e\u0440\u0456\u0432\u043d\u044e\u0454 2101 \u0434\u043b\u044f \"non-secure\" \u0456 2601 \u0434\u043b\u044f \"secure\". \u0414\u043b\u044f \u043f\u043e\u0441\u043b\u0456\u0434\u043e\u0432\u043d\u043e\u0433\u043e \u043f\u0440\u043e\u0442\u043e\u043a\u043e\u043b\u0443 \u0430\u0434\u0440\u0435\u0441\u0430 \u043f\u043e\u0432\u0438\u043d\u043d\u0430 \u043c\u0430\u0442\u0438 \u0432\u0438\u0433\u043b\u044f\u0434 'tty[:baud]'. \u041f\u0440\u0438\u043a\u043b\u0430\u0434: '/dev/ttyS1'. \u0428\u0432\u0438\u0434\u043a\u0456\u0441\u0442\u044c \u043f\u0435\u0440\u0435\u0434\u0430\u0447\u0456 \u043d\u0435 \u0454 \u043e\u0431\u043e\u0432'\u044f\u0437\u043a\u043e\u0432\u043e\u044e \u0456 \u0437\u0430 \u0437\u0430\u043c\u043e\u0432\u0447\u0443\u0432\u0430\u043d\u043d\u044f\u043c \u0434\u043e\u0440\u0456\u0432\u043d\u044e\u0454 115200.",

homeassistant/components/elkm1/translations/vi.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "ElkM1 c\u00f3 \u0111\u1ecba ch\u1ec9 n\u00e0y \u0111\u00e3 \u0111\u01b0\u1ee3c \u0111\u1ecbnh c\u1ea5u h\u00ecnh",
-            "already_configured": "ElkM1 c\u00f3 ti\u1ec1n t\u1ed1 n\u00e0y \u0111\u00e3 \u0111\u01b0\u1ee3c \u0111\u1ecbnh c\u1ea5u h\u00ecnh",
             "unknown": "L\u1ed7i kh\u00f4ng mong \u0111\u1ee3i"
         },
         "error": {
@@ -16,11 +14,6 @@
                     "temperature_unit": "\u0110\u01a1n v\u1ecb nhi\u1ec7t \u0111\u1ed9 ElkM1 s\u1eed d\u1ee5ng."
                 }
             },
-            "manual_connection": {
-                "data": {
-                    "temperature_unit": "\u0110\u01a1n v\u1ecb nhi\u1ec7t \u0111\u1ed9 ElkM1 s\u1eed d\u1ee5ng."
-                }
-            },
             "user": {
                 "description": "Ch\u1ecdn m\u1ed9t h\u1ec7 th\u1ed1ng \u0111\u01b0\u1ee3c ph\u00e1t hi\u1ec7n ho\u1eb7c 'Nh\u1eadp th\u1ee7 c\u00f4ng' n\u1ebfu kh\u00f4ng c\u00f3 thi\u1ebft b\u1ecb n\u00e0o \u0111\u01b0\u1ee3c ph\u00e1t hi\u1ec7n.",
                 "title": "K\u1ebft n\u1ed1i v\u1edbi b\u1ed9 \u0111i\u1ec1u khi\u1ec3n Elk-M1"

homeassistant/components/elkm1/translations/zh-Hans.json

@@ -48,7 +48,7 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "\u5c06 ElkM1 \u5e03\u9632\u4e3a\u5728\u5bb6\u5373\u65f6\u6a21\u5f0f\u3002",
+            "description": "\u5e03\u9632 ElkM1 \u4e3a\u5728\u5bb6\u5373\u65f6\u6a21\u5f0f\u3002",
             "fields": {
                 "code": {
                     "description": "\u7528\u4e8e\u542f\u52a8\u62a5\u8b66\u63a7\u5236\u9762\u677f\u7684\u62a5\u8b66\u4ee3\u7801\u3002",
@@ -58,7 +58,7 @@
             "name": "\u7acb\u5373\u5e03\u9632\u5728\u5bb6\u8b66\u62a5"
         },
         "alarm_arm_night_instant": {
-            "description": "\u5c06 ElkM1 \u5e03\u9632\u4e3a\u591c\u95f4\u5373\u65f6\u6a21\u5f0f\u3002",
+            "description": "\u5e03\u9632 ElkM1 \u4e3a\u591c\u95f4\u5373\u65f6\u6a21\u5f0f\u3002",
             "fields": {
                 "code": {
                     "description": "\u7528\u4e8e\u542f\u52a8\u62a5\u8b66\u63a7\u5236\u9762\u677f\u7684\u62a5\u8b66\u4ee3\u7801\u3002",
@@ -176,7 +176,7 @@
             "name": "\u8bf4\u51fa\u77ed\u8bed"
         },
         "speak_word": {
-            "description": "\u8bf4\u4e00\u53e5\u8bdd\u3002\u8bf7\u53c2\u9605 ElkM1 ASCII \u534f\u8bae\u6587\u6863\u4e2d\u7684\u5355\u8bcd\u5217\u8868\u3002",
+            "description": "\u8bf4\u51fa\u4e00\u4e2a\u5355\u8bcd\u3002\u8bf7\u53c2\u9605 Elk-M1 ASCII \u534f\u8bae\u6587\u6863\u4e2d\u7684\u5355\u8bcd\u5217\u8868\u3002",
             "fields": {
                 "number": {
                     "description": "\u8981\u8bf4\u7684\u5355\u8bcd\u7f16\u53f7\u3002",

homeassistant/components/elkm1/translations/zh-Hant.json

@@ -1,8 +1,8 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "\u4f7f\u7528\u6b64\u4f4d\u5740\u7684\u4e00\u7d44 ElkM1 \u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
-            "already_configured": "\u4f7f\u7528\u6b64 Prefix \u7684\u4e00\u7d44 ElkM1 \u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
+            "address_already_configured": "\u4f7f\u7528\u6b64\u4f4d\u5740\u7684\u4e00\u7d44 Elk-M1 \u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
+            "already_configured": "\u4f7f\u7528\u6b64 Prefix \u7684\u4e00\u7d44 Elk-M1 \u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
             "already_in_progress": "\u8a2d\u5b9a\u5df2\u7d93\u9032\u884c\u4e2d",
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
             "invalid_auth": "\u8eab\u4efd\u9a57\u8b49\u7121\u6548",
@@ -19,7 +19,7 @@
                 "data": {
                     "password": "\u5bc6\u78bc",
                     "protocol": "\u901a\u8a0a\u5354\u5b9a",
-                    "temperature_unit": "ElkM1 \u6240\u4f7f\u7528\u6eab\u5ea6\u55ae\u4f4d\u3002",
+                    "temperature_unit": "Elk-M1 \u6240\u4f7f\u7528\u6eab\u5ea6\u55ae\u4f4d\u3002",
                     "username": "\u4f7f\u7528\u8005\u540d\u7a31"
                 },
                 "description": "\u9023\u7dda\u81f3\u6240\u767c\u73fe\u7684\u7cfb\u7d71\uff1a{mac_address} ({host})",
@@ -29,9 +29,9 @@
                 "data": {
                     "address": "IP \u6216\u7db2\u57df\u540d\u7a31\u3001\u5e8f\u5217\u57e0\uff08\u5047\u5982\u900f\u904e\u5e8f\u5217\u9023\u7dda\uff09\u3002",
                     "password": "\u5bc6\u78bc",
-                    "prefix": "\u7368\u4e00\u7684 Prefix\uff08\u5047\u5982\u50c5\u6709\u4e00\u7d44 ElkM1 \u5247\u4fdd\u7559\u7a7a\u767d\uff09\u3002",
+                    "prefix": "\u7368\u4e00\u7684 Prefix\uff08\u5047\u5982\u50c5\u6709\u4e00\u7d44 Elk-M1 \u5247\u4fdd\u7559\u7a7a\u767d\uff09\u3002",
                     "protocol": "\u901a\u8a0a\u5354\u5b9a",
-                    "temperature_unit": "ElkM1 \u6240\u4f7f\u7528\u6eab\u5ea6\u55ae\u4f4d\u3002",
+                    "temperature_unit": "Elk-M1 \u6240\u4f7f\u7528\u6eab\u5ea6\u55ae\u4f4d\u3002",
                     "username": "\u4f7f\u7528\u8005\u540d\u7a31"
                 },
                 "description": "\u52a0\u5bc6\u8207\u975e\u52a0\u5bc6\u4e4b\u4f4d\u5740\u5b57\u4e32\u683c\u5f0f\u5fc5\u9808\u70ba 'address[:port]'\u3002\u4f8b\u5982\uff1a'192.168.1.1'\u3002\u901a\u8a0a\u57e0\u70ba\u9078\u9805\u8f38\u5165\uff0c\u975e\u52a0\u5bc6\u9810\u8a2d\u503c\u70ba 2101\u3001\u52a0\u5bc6\u5247\u70ba 2601\u3002\u5e8f\u5217\u901a\u8a0a\u5354\u5b9a\u3001\u4f4d\u5740\u683c\u5f0f\u5fc5\u9808\u70ba 'tty[:baud]'\u3002\u4f8b\u5982\uff1a'/dev/ttyS1'\u3002\u50b3\u8f38\u7387\u70ba\u9078\u9805\u8f38\u5165\uff0c\u9810\u8a2d\u503c\u70ba 115200\u3002",
@@ -48,7 +48,7 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "\u5c07 ElkM1 \u8a2d\u5b9a\u70ba\u5728\u5bb6\u8b66\u6212\u6a21\u5f0f\u3002",
+            "description": "\u5c07 Elk-M1 \u8a2d\u5b9a\u70ba\u5728\u5bb6\u8b66\u6212\u6a21\u5f0f\u3002",
             "fields": {
                 "code": {
                     "description": "\u7528\u65bc\u555f\u52d5\u8b66\u5831\u63a7\u5236\u9762\u677f\u7684\u8b66\u5831\u5bc6\u78bc\u3002",
@@ -58,7 +58,7 @@
             "name": "\u8a2d\u5b9a\u5728\u5bb6\u8b66\u6212"
         },
         "alarm_arm_night_instant": {
-            "description": "\u5c07 ElkM1 \u8a2d\u5b9a\u70ba\u591c\u9593\u8b66\u6212\u6a21\u5f0f\u3002",
+            "description": "\u5c07 Elk-M1 \u8a2d\u5b9a\u70ba\u591c\u9593\u8b66\u6212\u6a21\u5f0f\u3002",
             "fields": {
                 "code": {
                     "description": "\u7528\u65bc\u555f\u52d5\u8b66\u5831\u63a7\u5236\u9762\u677f\u7684\u8b66\u5831\u5bc6\u78bc\u3002",
@@ -68,7 +68,7 @@
             "name": "\u8a2d\u5b9a\u591c\u9593\u8b66\u6212"
         },
         "alarm_arm_vacation": {
-            "description": "\u5c07 ElkM1 \u8a2d\u5b9a\u70ba\u5ea6\u5047\u6a21\u5f0f\u3002",
+            "description": "\u5c07 Elk-M1 \u8a2d\u5b9a\u70ba\u5ea6\u5047\u6a21\u5f0f\u3002",
             "fields": {
                 "code": {
                     "description": "\u7528\u65bc\u555f\u52d5\u8b66\u5831\u63a7\u5236\u9762\u677f\u7684\u8b66\u5831\u5bc6\u78bc\u3002",
@@ -98,7 +98,7 @@
             "name": "\u8b66\u5831\u6e05\u9664\u5bc6\u78bc"
         },
         "alarm_display_message": {
-            "description": "\u65bc\u5340\u57df\u7684\u6240\u6709 ElkM1 \u9375\u76e4\u4e0a\u986f\u793a\u8a0a\u606f\u3002",
+            "description": "\u65bc\u5340\u57df\u7684\u6240\u6709 Elk-M1 \u9375\u76e4\u4e0a\u986f\u793a\u8a0a\u606f\u3002",
             "fields": {
                 "beep": {
                     "description": "0 = \u7121\u8072\u30011 = \u6709\u8702\u9cf4\u8072\u3002",
@@ -162,7 +162,7 @@
             "name": "\u8a2d\u5b9a\u6642\u9593"
         },
         "speak_phrase": {
-            "description": "\u95b1\u8b80\u77ed\u8a9e\u3002\u8acb\u53c3\u95b1 ElkM1 ASCII \u5354\u8b70\u6587\u4ef6\u4e2d\u7684\u77ed\u8a9e\u5217\u8868\u3002",
+            "description": "\u95b1\u8b80\u77ed\u8a9e\u3002\u8acb\u53c3\u95b1 Elk-M1 ASCII \u5354\u8b70\u6587\u4ef6\u4e2d\u7684\u77ed\u8a9e\u5217\u8868\u3002",
             "fields": {
                 "number": {
                     "description": "\u95b1\u8b80\u7684\u77ed\u8a9e\u6578\u3002",
@@ -176,7 +176,7 @@
             "name": "\u95b1\u8b80\u77ed\u8a9e"
         },
         "speak_word": {
-            "description": "\u95b1\u8b80\u6587\u5b57\u3002\u8acb\u53c3\u95b1 ElkM1 ASCII \u5354\u8b70\u6587\u4ef6\u4e2d\u7684\u8a5e\u5f59\u5217\u8868\u3002",
+            "description": "\u95b1\u8b80\u6587\u5b57\u3002\u8acb\u53c3\u95b1 Elk-M1 ASCII \u5354\u8b70\u6587\u4ef6\u4e2d\u7684\u8a5e\u5f59\u5217\u8868\u3002",
             "fields": {
                 "number": {
                     "description": "\u95b1\u8b80\u7684\u6587\u5b57\u6578\u3002",

homeassistant/components/emoncms/manifest.json

@@ -5,5 +5,5 @@
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/emoncms",
   "iot_class": "local_polling",
-  "requirements": ["pyemoncms==0.1.2"]
+  "requirements": ["pyemoncms==0.1.3"]
 }

homeassistant/components/emoncms_history/manifest.json

@@ -5,5 +5,5 @@
   "documentation": "https://www.home-assistant.io/integrations/emoncms_history",
   "iot_class": "local_polling",
   "quality_scale": "legacy",
-  "requirements": ["pyemoncms==0.1.2"]
+  "requirements": ["pyemoncms==0.1.3"]
 }

homeassistant/components/energy/translations/sv.json

@@ -2,11 +2,11 @@
     "issues": {
         "entity_negative_state": {
             "description": "F\u00f6ljande entiteter har ett negativt tillst\u00e5nd medan ett positivt tillst\u00e5nd f\u00f6rv\u00e4ntas:",
-            "title": "Entiteten har ett negativt tillst\u00e5nd"
+            "title": "Entitet har ett negativt tillst\u00e5nd"
         },
         "entity_not_defined": {
             "description": "Kontrollera integrationen eller konfigurationen som tillhandah\u00e5ller:",
-            "title": "Entiteten \u00e4r inte definierad"
+            "title": "Entitet \u00e4r inte definierad"
         },
         "entity_state_class_measurement_no_last_reset": {
             "description": "F\u00f6ljande entiteter har tillst\u00e5ndsklass 'measurement' men 'last_reset' saknas:",
@@ -14,7 +14,7 @@
         },
         "entity_state_non_numeric": {
             "description": "F\u00f6ljande entiteter har ett tillst\u00e5nd som inte kan tolkas som ett tal:",
-            "title": "Entiteten har icke-numeriskt tillst\u00e5nd"
+            "title": "Entitet har icke-numeriskt tillst\u00e5nd"
         },
         "entity_unavailable": {
             "description": "Tillst\u00e5ndet f\u00f6r dessa konfigurerade entiteter \u00e4r f\u00f6r n\u00e4rvarande inte tillg\u00e4ngligt:",
@@ -54,7 +54,7 @@
         },
         "recorder_untracked": {
             "description": "Home Assistant Recorder har konfigurerats f\u00f6r att undanta dessa konfigurerade entiteter:",
-            "title": "Entiteten sp\u00e5ras inte"
+            "title": "Entitet sp\u00e5ras inte"
         },
         "statistics_not_defined": {
             "description": "Vissa entiteter har f\u00f6r n\u00e4rvarande ingen statistikmetadata. Om de \u00e4r nyskapade kan det ta upp till 5 minuter innan det b\u00f6rjar genereras f\u00f6r f\u00f6ljande entiteter:",

homeassistant/components/environment_canada/translations/uk.json

@@ -22,5 +22,12 @@
                 "title": "Environment Canada: \u043f\u043e\u0433\u043e\u0434\u0430 \u0442\u0430 \u043c\u043e\u0432\u0430"
             }
         }
+    },
+    "entity": {
+        "camera": {
+            "radar": {
+                "name": "\u0420\u0430\u0434\u0430\u0440"
+            }
+        }
     }
 }

homeassistant/components/esphome/translations/ca.json

@@ -55,8 +55,7 @@
     },
     "issues": {
         "api_password_deprecated": {
-            "description": "La contrasenya API per a ESPHome est\u00e0 obsoleta, es recomana l'\u00fas d'una clau de xifrat d'API.\n\nEsborra la contrasenya API i afegeix una clau de xifrat al teu dispositiu ESPHome per resoldre aquest problema.",
-            "title": "Contrasenya API de {name} obsoleta"
+            "description": "La contrasenya API per a ESPHome est\u00e0 obsoleta, es recomana l'\u00fas d'una clau de xifrat d'API.\n\nEsborra la contrasenya API i afegeix una clau de xifrat al teu dispositiu ESPHome per resoldre aquest problema."
         },
         "ble_firmware_outdated": {
             "description": "Per millorar la fiabilitat i el rendiment de Bluetooth, et recomanem que actualitzis {name} a ESPHome {version} o posterior. Quan actualitzis el dispositiu d'una versi\u00f3 d'ESPHome anterior a la 2022.12.0, es recomana utilitzar un cable s\u00e8rie enlloc de fer una actualitzaci\u00f3 remota, per poder aprofitar el nou esquema de particions.",

homeassistant/components/esphome/translations/cs.json

@@ -102,7 +102,7 @@
         },
         "select": {
             "pipeline": {
-                "name": "Asistent",
+                "name": "Asistent {index}",
                 "state": {
                     "preferred": "Preferov\u00e1no"
                 }
@@ -116,6 +116,7 @@
                 }
             },
             "wake_word": {
+                "name": "Probouzec\u00ed slovo {index}",
                 "state": {
                     "okay_nabu": "Okay Nabu"
                 }
@@ -133,7 +134,7 @@
             "message": "Chyba p\u0159i kompilaci {configuration}; zkuste to znovu v ovl\u00e1dac\u00edm panelu ESPHome, kde najdete dal\u0161\u00ed informace."
         },
         "error_uploading": {
-            "message": "Chyba p\u0159i OTA na {configuration}; zkuste znovu zobrazit dal\u0161\u00ed informace na ovl\u00e1dac\u00edm panelu ESPHome."
+            "message": "Chyba p\u0159i aktualizaci OTA na {configuration}; zkuste znovu zobrazit dal\u0161\u00ed informace na ovl\u00e1dac\u00edm panelu ESPHome."
         },
         "ota_in_progress": {
             "message": "Pro {configuration} ji\u017e prob\u00edh\u00e1 aktualizace OTA (Over-The-Air)."

homeassistant/components/esphome/translations/da.json

@@ -45,8 +45,7 @@
     },
     "issues": {
         "api_password_deprecated": {
-            "description": "API-adgangskoden til ESPHome udfases, og det anbefales i stedet at bruge en API-krypteringsn\u00f8gle.\n\nFjern API-adgangskoden, og f\u00f8j en krypteringsn\u00f8gle til din ESPHome-enhed for at l\u00f8se dette problem.",
-            "title": "API-adgangskode udfaset p\u00e5 {name}"
+            "description": "API-adgangskoden til ESPHome udfases, og det anbefales i stedet at bruge en API-krypteringsn\u00f8gle.\n\nFjern API-adgangskoden, og f\u00f8j en krypteringsn\u00f8gle til din ESPHome-enhed for at l\u00f8se dette problem."
         },
         "ble_firmware_outdated": {
             "description": "For at forbedre Bluetooth-p\u00e5lidelighed og ydeevne anbefaler vi st\u00e6rkt, at du opdaterer {name} med ESPHome {version} eller nyere. N\u00e5r du opdaterer enheden fra ESPHome tidligere end 2022.12.0, anbefales det at bruge et serielt kabel i stedet for en tr\u00e5dl\u00f8s opdatering for at drage fordel af det nye partitionsskema.",

homeassistant/components/esphome/translations/de.json

@@ -102,7 +102,7 @@
         },
         "select": {
             "pipeline": {
-                "name": "Assistent {index}",
+                "name": "Assistent{index}",
                 "state": {
                     "preferred": "Bevorzugt"
                 }
@@ -116,7 +116,7 @@
                 }
             },
             "wake_word": {
-                "name": "Aktivierungswort {index}",
+                "name": "Aktivierungswort{index}",
                 "state": {
                     "okay_nabu": "Okay Nabu"
                 }
@@ -131,7 +131,7 @@
             "message": "Fehler bei der Kommunikation mit dem Ger\u00e4t {device_name}: {error}"
         },
         "error_compiling": {
-            "message": "Fehler beim Kompilieren von {configuration}. Versuch es erneut im ESPHome-Dashboard, um weitere Informationen zu erhalten."
+            "message": "Fehler beim Kompilieren von {configuration}. Versuche es erneut im ESPHome-Dashboard, um weitere Informationen zu erhalten."
         },
         "error_uploading": {
             "message": "Fehler w\u00e4hrend des OTA-Updates (Over-The-Air) von {configuration}. Versuche es erneut im ESPHome-Dashboard, um weitere Informationen zu erhalten."
@@ -195,7 +195,7 @@
                     "subscribe_logs": "Protokolle des Ger\u00e4ts abonnieren."
                 },
                 "data_description": {
-                    "allow_service_calls": "Wenn diese Funktion aktiviert ist, k\u00f6nnen ESPHome-Ger\u00e4te Home Assistant-Aktionen durchf\u00fchren, z. B. Dienste anrufen oder Ereignisse senden. Aktiviere dies nur, wenn du dem Ger\u00e4t vertraust.",
+                    "allow_service_calls": "Wenn diese Funktion aktiviert ist, k\u00f6nnen ESPHome-Ger\u00e4te Home Assistant-Aktionen durchf\u00fchren oder Ereignisse senden. Aktiviere dies nur, wenn du dem Ger\u00e4t vertraust.",
                     "subscribe_logs": "Wenn diese Funktion aktiviert ist, sendet das Ger\u00e4t Protokolle an Home Assistant, die du im Protokollbereich einsehen kannst."
                 }
             }

homeassistant/components/esphome/translations/el.json

@@ -9,7 +9,6 @@
             "mqtt_missing_api": "\u039b\u03b5\u03af\u03c0\u03b5\u03b9 \u03b7 \u03b8\u03cd\u03c1\u03b1 API \u03c3\u03c4\u03b9\u03c2 \u03b9\u03b4\u03b9\u03cc\u03c4\u03b7\u03c4\u03b5\u03c2 MQTT.",
             "mqtt_missing_ip": "\u039b\u03b5\u03af\u03c0\u03b5\u03b9 \u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 IP \u03c3\u03c4\u03b9\u03c2 \u03b9\u03b4\u03b9\u03cc\u03c4\u03b7\u03c4\u03b5\u03c2 MQTT.",
             "mqtt_missing_mac": "\u039b\u03b5\u03af\u03c0\u03b5\u03b9 \u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 MAC \u03c3\u03c4\u03b9\u03c2 \u03b9\u03b4\u03b9\u03cc\u03c4\u03b7\u03c4\u03b5\u03c2 MQTT.",
-            "mqtt_missing_payload": "\u039b\u03b5\u03af\u03c0\u03b5\u03b9 MQTT payload.",
             "name_conflict_migrated": "\u0397 \u03b4\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 \u03b3\u03b9\u03b1 \u03c4\u03bf \"{name}\" \u03ad\u03c7\u03b5\u03b9 \u03bc\u03b5\u03c4\u03b1\u03c6\u03b5\u03c1\u03b8\u03b5\u03af \u03c3\u03b5 \u03bc\u03b9\u03b1 \u03bd\u03ad\u03b1 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03bc\u03b5 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 MAC \"{mac}\" \u03b1\u03c0\u03cc \u03c4\u03bf \"{existing_mac}\".",
             "reauth_successful": "\u039f \u03b5\u03ba \u03bd\u03ad\u03bf\u03c5 \u03ad\u03bb\u03b5\u03b3\u03c7\u03bf\u03c2 \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03ae\u03c4\u03b1\u03bd \u03b5\u03c0\u03b9\u03c4\u03c5\u03c7\u03ae\u03c2",
             "reauth_unique_id_changed": "**\u039f \u03b5\u03ba \u03bd\u03ad\u03bf\u03c5 \u03ad\u03bb\u03b5\u03b3\u03c7\u03bf\u03c2 \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03c4\u03bf\u03c5 `{name}` \u03bc\u03b1\u03c4\u03b1\u03b9\u03ce\u03b8\u03b7\u03ba\u03b5** \u03b5\u03c0\u03b5\u03b9\u03b4\u03ae \u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 `{host}` \u03b4\u03b5\u03af\u03c7\u03bd\u03b5\u03b9 \u03c3\u03b5 \u03b4\u03b9\u03b1\u03c6\u03bf\u03c1\u03b5\u03c4\u03b9\u03ba\u03ae \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae: `{unexpected_device_name}` (MAC: `{unexpected_mac}`) \u03b1\u03bd\u03c4\u03af \u03b3\u03b9\u03b1 \u03c4\u03b7\u03bd \u03b1\u03bd\u03b1\u03bc\u03b5\u03bd\u03cc\u03bc\u03b5\u03bd\u03b7 (MAC: `{expected_mac}`).",
@@ -129,20 +128,13 @@
         "error_communicating_with_device": {
             "message": "\u03a3\u03c6\u03ac\u03bb\u03bc\u03b1 \u03b5\u03c0\u03b9\u03ba\u03bf\u03b9\u03bd\u03c9\u03bd\u03af\u03b1\u03c2 \u03bc\u03b5 \u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae {device_name}: {error}"
         },
-        "error_compiling": {
-            "message": "\u03a3\u03c6\u03ac\u03bb\u03bc\u03b1 \u03bc\u03b5\u03c4\u03b1\u03b3\u03bb\u03ce\u03c4\u03c4\u03b9\u03c3\u03b7\u03c2 {configuration}; \u0394\u03bf\u03ba\u03b9\u03bc\u03ac\u03c3\u03c4\u03b5 \u03be\u03b1\u03bd\u03ac \u03c3\u03c4\u03bf \u03c4\u03b1\u03bc\u03c0\u03bb\u03cc \u03c4\u03bf\u03c5 ESPHome \u03b3\u03b9\u03b1 \u03c0\u03b5\u03c1\u03b9\u03c3\u03c3\u03cc\u03c4\u03b5\u03c1\u03b5\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2."
-        },
-        "error_uploading": {
-            "message": "\u03a3\u03c6\u03ac\u03bb\u03bc\u03b1 \u03ba\u03b1\u03c4\u03ac \u03c4\u03bf OTA (Over-The-Air) \u03c4\u03bf\u03c5 {configuration}- \u0394\u03bf\u03ba\u03b9\u03bc\u03ac\u03c3\u03c4\u03b5 \u03be\u03b1\u03bd\u03ac \u03c3\u03c4\u03bf \u03c4\u03b1\u03bc\u03c0\u03bb\u03cc ESPHome \u03b3\u03b9\u03b1 \u03c0\u03b5\u03c1\u03b9\u03c3\u03c3\u03cc\u03c4\u03b5\u03c1\u03b5\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2."
-        },
         "ota_in_progress": {
             "message": "\u039c\u03b9\u03b1 \u03b5\u03bd\u03b7\u03bc\u03ad\u03c1\u03c9\u03c3\u03b7 OTA (Over-The-Air) \u03b2\u03c1\u03af\u03c3\u03ba\u03b5\u03c4\u03b1\u03b9 \u03ae\u03b4\u03b7 \u03c3\u03b5 \u03b5\u03be\u03ad\u03bb\u03b9\u03be\u03b7 \u03b3\u03b9\u03b1 \u03c4\u03bf {configuration}."
         }
     },
     "issues": {
         "api_password_deprecated": {
-            "description": "\u039f \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 API \u03b3\u03b9\u03b1 \u03c4\u03bf ESPHome \u03ad\u03c7\u03b5\u03b9 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af \u03ba\u03b1\u03b9 \u03c3\u03c5\u03bd\u03b9\u03c3\u03c4\u03ac\u03c4\u03b1\u03b9 \u03b7 \u03c7\u03c1\u03ae\u03c3\u03b7 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 API. \n\n\u039a\u03b1\u03c4\u03b1\u03c1\u03b3\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf\u03bd \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 API \u03ba\u03b1\u03b9 \u03c0\u03c1\u03bf\u03c3\u03b8\u03ad\u03c3\u03c4\u03b5 \u03ad\u03bd\u03b1 \u03ba\u03bb\u03b5\u03b9\u03b4\u03af \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 \u03c3\u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03c3\u03b1\u03c2 ESPHome \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b5\u03c0\u03b9\u03bb\u03cd\u03c3\u03b5\u03c4\u03b5 \u03b1\u03c5\u03c4\u03cc \u03c4\u03bf \u03b6\u03ae\u03c4\u03b7\u03bc\u03b1.",
-            "title": "\u039f \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 API \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03ae\u03b8\u03b7\u03ba\u03b5 \u03c3\u03c4\u03bf {name}"
+            "description": "\u039f \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc\u03c2 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 API \u03b3\u03b9\u03b1 \u03c4\u03bf ESPHome \u03ad\u03c7\u03b5\u03b9 \u03ba\u03b1\u03c4\u03b1\u03c1\u03b3\u03b7\u03b8\u03b5\u03af \u03ba\u03b1\u03b9 \u03c3\u03c5\u03bd\u03b9\u03c3\u03c4\u03ac\u03c4\u03b1\u03b9 \u03b7 \u03c7\u03c1\u03ae\u03c3\u03b7 \u03ba\u03bb\u03b5\u03b9\u03b4\u03b9\u03bf\u03cd \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 API. \n\n\u039a\u03b1\u03c4\u03b1\u03c1\u03b3\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf\u03bd \u03ba\u03c9\u03b4\u03b9\u03ba\u03cc \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2 API \u03ba\u03b1\u03b9 \u03c0\u03c1\u03bf\u03c3\u03b8\u03ad\u03c3\u03c4\u03b5 \u03ad\u03bd\u03b1 \u03ba\u03bb\u03b5\u03b9\u03b4\u03af \u03ba\u03c1\u03c5\u03c0\u03c4\u03bf\u03b3\u03c1\u03ac\u03c6\u03b7\u03c3\u03b7\u03c2 \u03c3\u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03c3\u03b1\u03c2 ESPHome \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b5\u03c0\u03b9\u03bb\u03cd\u03c3\u03b5\u03c4\u03b5 \u03b1\u03c5\u03c4\u03cc \u03c4\u03bf \u03b6\u03ae\u03c4\u03b7\u03bc\u03b1."
         },
         "assist_in_progress_deprecated": {
             "fix_flow": {
@@ -194,7 +186,6 @@
                     "subscribe_logs": "\u0395\u03b3\u03b3\u03c1\u03b1\u03c6\u03ae \u03c3\u03b5 \u03b1\u03c1\u03c7\u03b5\u03af\u03b1 \u03ba\u03b1\u03c4\u03b1\u03b3\u03c1\u03b1\u03c6\u03ae\u03c2 \u03b1\u03c0\u03cc \u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae."
                 },
                 "data_description": {
-                    "allow_service_calls": "\u039f\u03c4\u03b1\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03b7\u03bc\u03ad\u03bd\u03bf, \u03bf\u03b9 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ad\u03c2 ESPHome \u03bc\u03c0\u03bf\u03c1\u03bf\u03cd\u03bd \u03bd\u03b1 \u03b5\u03ba\u03c4\u03b5\u03bb\u03bf\u03cd\u03bd \u03b5\u03bd\u03ad\u03c1\u03b3\u03b5\u03b9\u03b5\u03c2 \u03c4\u03bf\u03c5 Home Assistant, \u03cc\u03c0\u03c9\u03c2 \u03ba\u03bb\u03ae\u03c3\u03b7 \u03c5\u03c0\u03b7\u03c1\u03b5\u03c3\u03b9\u03ce\u03bd \u03ae \u03b1\u03c0\u03bf\u03c3\u03c4\u03bf\u03bb\u03ae \u03c3\u03c5\u03bc\u03b2\u03ac\u03bd\u03c4\u03c9\u03bd. \u0395\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf \u03bc\u03cc\u03bd\u03bf \u03b1\u03bd \u03b5\u03bc\u03c0\u03b9\u03c3\u03c4\u03b5\u03cd\u03b5\u03c3\u03c4\u03b5 \u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae.",
                     "subscribe_logs": "\u039f\u03c4\u03b1\u03bd \u03b5\u03af\u03bd\u03b1\u03b9 \u03b5\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03b7\u03bc\u03ad\u03bd\u03bf, \u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03b8\u03b1 \u03c3\u03c4\u03ad\u03bb\u03bd\u03b5\u03b9 \u03b1\u03c1\u03c7\u03b5\u03af\u03b1 \u03ba\u03b1\u03c4\u03b1\u03b3\u03c1\u03b1\u03c6\u03ae\u03c2 \u03c3\u03c4\u03bf Home Assistant \u03ba\u03b1\u03b9 \u03bc\u03c0\u03bf\u03c1\u03b5\u03af\u03c4\u03b5 \u03bd\u03b1 \u03c4\u03b1 \u03b4\u03b5\u03af\u03c4\u03b5 \u03c3\u03c4\u03bf\u03bd \u03c0\u03af\u03bd\u03b1\u03ba\u03b1 \u03b1\u03c1\u03c7\u03b5\u03af\u03c9\u03bd \u03ba\u03b1\u03c4\u03b1\u03b3\u03c1\u03b1\u03c6\u03ae\u03c2."
                 }
             }

homeassistant/components/esphome/translations/en-GB.json

@@ -9,7 +9,7 @@
             "mqtt_missing_api": "Missing API port in MQTT properties.",
             "mqtt_missing_ip": "Missing IP address in MQTT properties.",
             "mqtt_missing_mac": "Missing MAC address in MQTT properties.",
-            "mqtt_missing_payload": "Missing MQTT Payload.",
+            "mqtt_missing_payload": "Missing MQTT payload.",
             "name_conflict_migrated": "The configuration for `{name}` has been migrated to a new device with MAC address `{mac}` from `{existing_mac}`.",
             "reauth_successful": "Re-authentication was successful",
             "reauth_unique_id_changed": "**Re-authentication of `{name}` was aborted** because the address `{host}` points to a different device: `{unexpected_device_name}` (MAC: `{unexpected_mac}`) instead of the expected one (MAC: `{expected_mac}`).",
@@ -131,10 +131,10 @@
             "message": "Error communicating with the device {device_name}: {error}"
         },
         "error_compiling": {
-            "message": "Error compiling {configuration}; Try again in ESPHome dashboard for more information."
+            "message": "Error compiling {configuration}. Try again in ESPHome dashboard for more information."
         },
         "error_uploading": {
-            "message": "Error during OTA (Over-The-Air) of {configuration}; Try again in ESPHome dashboard for more information."
+            "message": "Error during OTA (Over-The-Air) update of {configuration}. Try again in ESPHome dashboard for more information."
         },
         "ota_in_progress": {
             "message": "An OTA (Over-The-Air) update is already in progress for {configuration}."
@@ -143,7 +143,7 @@
     "issues": {
         "api_password_deprecated": {
             "description": "The API password for ESPHome is deprecated and the use of an API encryption key is recommended instead.\n\nRemove the API password and add an encryption key to your ESPHome device to resolve this issue.",
-            "title": "API Password deprecated on {name}"
+            "title": "API password deprecated on {name}"
         },
         "assist_in_progress_deprecated": {
             "fix_flow": {
@@ -195,7 +195,7 @@
                     "subscribe_logs": "Subscribe to logs from the device."
                 },
                 "data_description": {
-                    "allow_service_calls": "When enabled, ESPHome devices can perform Home Assistant actions, such as calling services or sending events. Only enable this if you trust the device.",
+                    "allow_service_calls": "When enabled, ESPHome devices can perform Home Assistant actions or send events. Only enable this if you trust the device.",
                     "subscribe_logs": "When enabled, the device will send logs to Home Assistant and you can view them in the logs panel."
                 }
             }

homeassistant/components/esphome/translations/en.json

@@ -9,7 +9,7 @@
             "mqtt_missing_api": "Missing API port in MQTT properties.",
             "mqtt_missing_ip": "Missing IP address in MQTT properties.",
             "mqtt_missing_mac": "Missing MAC address in MQTT properties.",
-            "mqtt_missing_payload": "Missing MQTT Payload.",
+            "mqtt_missing_payload": "Missing MQTT payload.",
             "name_conflict_migrated": "The configuration for `{name}` has been migrated to a new device with MAC address `{mac}` from `{existing_mac}`.",
             "reauth_successful": "Re-authentication was successful",
             "reauth_unique_id_changed": "**Re-authentication of `{name}` was aborted** because the address `{host}` points to a different device: `{unexpected_device_name}` (MAC: `{unexpected_mac}`) instead of the expected one (MAC: `{expected_mac}`).",
@@ -131,10 +131,10 @@
             "message": "Error communicating with the device {device_name}: {error}"
         },
         "error_compiling": {
-            "message": "Error compiling {configuration}; Try again in ESPHome dashboard for more information."
+            "message": "Error compiling {configuration}. Try again in ESPHome dashboard for more information."
         },
         "error_uploading": {
-            "message": "Error during OTA (Over-The-Air) of {configuration}; Try again in ESPHome dashboard for more information."
+            "message": "Error during OTA (Over-The-Air) update of {configuration}. Try again in ESPHome dashboard for more information."
         },
         "ota_in_progress": {
             "message": "An OTA (Over-The-Air) update is already in progress for {configuration}."
@@ -143,7 +143,7 @@
     "issues": {
         "api_password_deprecated": {
             "description": "The API password for ESPHome is deprecated and the use of an API encryption key is recommended instead.\n\nRemove the API password and add an encryption key to your ESPHome device to resolve this issue.",
-            "title": "API Password deprecated on {name}"
+            "title": "API password deprecated on {name}"
         },
         "assist_in_progress_deprecated": {
             "fix_flow": {
@@ -195,7 +195,7 @@
                     "subscribe_logs": "Subscribe to logs from the device."
                 },
                 "data_description": {
-                    "allow_service_calls": "When enabled, ESPHome devices can perform Home Assistant actions, such as calling services or sending events. Only enable this if you trust the device.",
+                    "allow_service_calls": "When enabled, ESPHome devices can perform Home Assistant actions or send events. Only enable this if you trust the device.",
                     "subscribe_logs": "When enabled, the device will send logs to Home Assistant and you can view them in the logs panel."
                 }
             }

homeassistant/components/esphome/translations/es.json

@@ -9,7 +9,7 @@
             "mqtt_missing_api": "Falta el puerto de la API en las propiedades de MQTT.",
             "mqtt_missing_ip": "Falta la direcci\u00f3n IP en las propiedades de MQTT.",
             "mqtt_missing_mac": "Falta la direcci\u00f3n MAC en las propiedades de MQTT.",
-            "mqtt_missing_payload": "Falta payload MQTT.",
+            "mqtt_missing_payload": "Falta el payload MQTT.",
             "name_conflict_migrated": "La configuraci\u00f3n de `{name}` se ha migrado a un nuevo dispositivo con direcci\u00f3n MAC `{mac}` desde `{existing_mac}`.",
             "reauth_successful": "La autenticaci\u00f3n se volvi\u00f3 a realizar correctamente",
             "reauth_unique_id_changed": "**Se cancel\u00f3 la reautenticaci\u00f3n de `{name}`** porque la direcci\u00f3n `{host}` apunta a un dispositivo diferente: `{unexpected_device_name}` (MAC: `{unexpected_mac}`) en lugar del esperado (MAC: `{expected_mac}`).",
@@ -131,10 +131,10 @@
             "message": "Error al comunicarse con el dispositivo {device_name}: {error}"
         },
         "error_compiling": {
-            "message": "Error al compilar {configuration}; Int\u00e9ntalo de nuevo en el panel de ESPHome para obtener m\u00e1s informaci\u00f3n."
+            "message": "Error al compilar {configuration}. Int\u00e9ntalo de nuevo en el panel de ESPHome para obtener m\u00e1s informaci\u00f3n."
         },
         "error_uploading": {
-            "message": "Error durante OTA (Over-The-Air) de {configuration}; Int\u00e9ntalo de nuevo en el panel de ESPHome para obtener m\u00e1s informaci\u00f3n."
+            "message": "Error durante la actualizaci\u00f3n OTA (Over-The-Air) de {configuration}; Int\u00e9ntalo de nuevo en el panel de ESPHome para obtener m\u00e1s informaci\u00f3n."
         },
         "ota_in_progress": {
             "message": "Ya est\u00e1 en curso una actualizaci\u00f3n OTA (Over-The-Air) para {configuration}."
@@ -195,7 +195,7 @@
                     "subscribe_logs": "Suscribirse a los registros del dispositivo."
                 },
                 "data_description": {
-                    "allow_service_calls": "Cuando est\u00e1 habilitado, los dispositivos ESPHome pueden realizar acciones de Home Assistant, como llamar a servicios o enviar eventos. Habil\u00edtalo solo si conf\u00edas en el dispositivo.",
+                    "allow_service_calls": "Al habilitar esta opci\u00f3n, los dispositivos ESPHome pueden realizar acciones de Home Assistant o enviar eventos. Solo debes habilitar esta opci\u00f3n si conf\u00edas en el dispositivo.",
                     "subscribe_logs": "Cuando est\u00e1 habilitado, el dispositivo enviar\u00e1 registros a Home Assistant y podr\u00e1s verlos en el panel de registros."
                 }
             }

homeassistant/components/esphome/translations/et.json

@@ -9,7 +9,7 @@
             "mqtt_missing_api": "MQTT atribuutides puudub API-port.",
             "mqtt_missing_ip": "MQTT atribuutides puudub IP-aadress.",
             "mqtt_missing_mac": "MQTT atribuutides puudub MAC-aadress.",
-            "mqtt_missing_payload": "Puudub MQTT v\u00e4\u00e4rtus.",
+            "mqtt_missing_payload": "Puudub MQTT kasulik koormus.",
             "name_conflict_migrated": "Seadme \"{name}\" konfiguratsioon on \u00fcle viidud uude seadmesse MAC-aadressiga \"{mac}\" aadressilt \"{existing_mac}\".",
             "reauth_successful": "Taastuvastamine \u00f5nnestus",
             "reauth_unique_id_changed": "**Seadme `{name}` \u00fcmberseadistamine katkestati**, sest aadress `{host}` osutab teisele seadmele: `{unexpected_device_name}` (MAC: `{unexpected_mac}`) oodatud seadme asemel (MAC: `{expected_mac}`).",
@@ -131,10 +131,10 @@
             "message": "Viga seadmega {device_name} suhtlemisel: {error}"
         },
         "error_compiling": {
-            "message": "Viga {configuration} kompileerimisel ; Lisateabe saamiseks proovi uuesti ESPHome'i paneelil."
+            "message": "Viga {configuration} kompileerimisel. Lisateabe saamiseks proovi uuesti ESPHome'i paneelil."
         },
         "error_uploading": {
-            "message": "T\u00f5rge OTA (Over-The-Air) ajal {configuration}; Lisateabe saamiseks proovi uuesti ESPHome armatuurlaual."
+            "message": "T\u00f5rge OTA (Over-The-Air) uuenduse ajal {configuration}; Lisateabe saamiseks proovi uuesti ESPHome armatuurlaual."
         },
         "ota_in_progress": {
             "message": "OTA (Over-The-Air) v\u00e4rskendus on juba k\u00e4imas aadressil {configuration}."
@@ -195,7 +195,7 @@
                     "subscribe_logs": "Telli seadmest logid."
                 },
                 "data_description": {
-                    "allow_service_calls": "Kui see on lubatud, saavad ESPHome'i seadmed teha Home Assistantiga toiminguid nagu teenuste kutsumine v\u00f5i s\u00fcndmuste saatmine. Luba see ainult siis kui usaldad seadet.",
+                    "allow_service_calls": "Kui see on lubatud, saavad ESPHome'i seadmed teha Home Assistantiga toiminguid nagu toimingud v\u00f5i s\u00fcndmuste saatmine. Luba see ainult siis kui usaldad seadet.",
                     "subscribe_logs": "Kui see on lubatud, saadab seade logisid Home Assistant'ile ja neid saab vaadata logide paneelil."
                 }
             }

homeassistant/components/esphome/translations/fi.json

@@ -64,8 +64,7 @@
     },
     "issues": {
         "api_password_deprecated": {
-            "description": "ESPHomen API-salasana on vanhentunut, ja sen sijaan suositellaan API-salausavaimen k\u00e4ytt\u00f6\u00e4. \n\n Poista API-salasana ja lis\u00e4\u00e4 salausavain ESPHome-laitteeseesi ratkaistaksesi t\u00e4m\u00e4n ongelman.",
-            "title": "API-salasana poistettu k\u00e4yt\u00f6st\u00e4 {name}"
+            "description": "ESPHomen API-salasana on vanhentunut, ja sen sijaan suositellaan API-salausavaimen k\u00e4ytt\u00f6\u00e4. \n\n Poista API-salasana ja lis\u00e4\u00e4 salausavain ESPHome-laitteeseesi ratkaistaksesi t\u00e4m\u00e4n ongelman."
         },
         "ble_firmware_outdated": {
             "description": "Parantaaksesi Bluetoothin luotettavuutta ja suorituskyky\u00e4 suosittelemme, ett\u00e4 p\u00e4ivit\u00e4t {name} ESPHome {version}:lla tai uudemmalla versiolla. Kun laite p\u00e4ivitet\u00e4\u00e4n ESPHomesta aiemmin kuin 2022.12.0, on suositeltavaa k\u00e4ytt\u00e4\u00e4 sarjaporttia verkkop\u00e4ivityksen sijaan, jotta voidaan hy\u00f6dynt\u00e4\u00e4 uutta osiointij\u00e4rjestelm\u00e4\u00e4.",