homeassistant 2025.9.3__py3-none-any.whl → 2025.9.4__py3-none-any.whl

homeassistant/components/elkm1/translations/en.json

@@ -1,8 +1,8 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "An ElkM1 with this address is already configured",
-            "already_configured": "An ElkM1 with this prefix is already configured",
+            "address_already_configured": "An Elk-M1 with this address is already configured",
+            "already_configured": "An Elk-M1 with this prefix is already configured",
             "already_in_progress": "Configuration flow is already in progress",
             "cannot_connect": "Failed to connect",
             "invalid_auth": "Invalid authentication",
@@ -19,7 +19,7 @@
                 "data": {
                     "password": "Password",
                     "protocol": "Protocol",
-                    "temperature_unit": "The temperature unit ElkM1 uses.",
+                    "temperature_unit": "The temperature unit Elk-M1 uses.",
                     "username": "Username"
                 },
                 "description": "Connect to the discovered system: {mac_address} ({host})",
@@ -29,9 +29,9 @@
                 "data": {
                     "address": "The IP address or domain or serial port if connecting via serial.",
                     "password": "Password",
-                    "prefix": "A unique prefix (leave blank if you only have one ElkM1).",
+                    "prefix": "A unique prefix (leave blank if you only have one Elk-M1).",
                     "protocol": "Protocol",
-                    "temperature_unit": "The temperature unit ElkM1 uses.",
+                    "temperature_unit": "The temperature unit Elk-M1 uses.",
                     "username": "Username"
                 },
                 "description": "The address string must be in the form 'address[:port]' for 'secure' and 'non-secure'. Example: '192.168.1.1'. The port is optional and defaults to 2101 for 'non-secure' and 2601 for 'secure'. For the serial protocol, the address must be in the form 'tty[:baud]'. Example: '/dev/ttyS1'. The baud is optional and defaults to 115200.",
@@ -48,7 +48,7 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Arms the ElkM1 in home instant mode.",
+            "description": "Arms the Elk-M1 in home instant mode.",
             "fields": {
                 "code": {
                     "description": "Alarm code to arm the alarm control panel.",
@@ -58,7 +58,7 @@
             "name": "Alarm arm home instant"
         },
         "alarm_arm_night_instant": {
-            "description": "Arms the ElkM1 in night instant mode.",
+            "description": "Arms the Elk-M1 in night instant mode.",
             "fields": {
                 "code": {
                     "description": "Alarm code to arm the alarm control panel.",
@@ -68,7 +68,7 @@
             "name": "Alarm arm night instant"
         },
         "alarm_arm_vacation": {
-            "description": "Arms the ElkM1 in vacation mode.",
+            "description": "Arms the Elk-M1 in vacation mode.",
             "fields": {
                 "code": {
                     "description": "Alarm code to arm the alarm control panel.",
@@ -98,7 +98,7 @@
             "name": "Alarm clear bypass"
         },
         "alarm_display_message": {
-            "description": "Displays a message on all of the ElkM1 keypads for an area.",
+            "description": "Displays a message on all of the Elk-M1 keypads for an area.",
             "fields": {
                 "beep": {
                     "description": "0=no beep, 1=beep.",
@@ -162,7 +162,7 @@
             "name": "Set time"
         },
         "speak_phrase": {
-            "description": "Speaks a phrase. See list of phrases in ElkM1 ASCII Protocol documentation.",
+            "description": "Speaks a phrase. See list of phrases in Elk-M1 ASCII Protocol documentation.",
             "fields": {
                 "number": {
                     "description": "Phrase number to speak.",
@@ -176,7 +176,7 @@
             "name": "Speak phrase"
         },
         "speak_word": {
-            "description": "Speaks a word. See list of words in ElkM1 ASCII Protocol documentation.",
+            "description": "Speaks a word. See list of words in Elk-M1 ASCII Protocol documentation.",
             "fields": {
                 "number": {
                     "description": "Word number to speak.",

homeassistant/components/elkm1/translations/es-419.json

@@ -1,9 +1,5 @@
 {
     "config": {
-        "abort": {
-            "address_already_configured": "Un ElkM1 con esta direcci\u00f3n ya est\u00e1 configurado",
-            "already_configured": "Un ElkM1 con este prefijo ya est\u00e1 configurado"
-        },
         "step": {
             "user": {
                 "title": "Con\u00e9ctese al control Elk-M1"

homeassistant/components/elkm1/translations/es.json

@@ -19,7 +19,7 @@
                 "data": {
                     "password": "Contrase\u00f1a",
                     "protocol": "Protocolo",
-                    "temperature_unit": "La unidad de temperatura que utiliza ElkM1.",
+                    "temperature_unit": "La unidad de temperatura que utiliza Elk-M1.",
                     "username": "Nombre de usuario"
                 },
                 "description": "Conectar con el sistema descubierto: {mac_address} ({host})",
@@ -29,9 +29,9 @@
                 "data": {
                     "address": "La direcci\u00f3n IP o dominio o puerto serie si se conecta a trav\u00e9s de serie.",
                     "password": "Contrase\u00f1a",
-                    "prefix": "Un prefijo \u00fanico (d\u00e9jalo en blanco si solo tienes un ElkM1).",
+                    "prefix": "Un prefijo \u00fanico (d\u00e9jalo en blanco si solo tienes un Elk-M1).",
                     "protocol": "Protocolo",
-                    "temperature_unit": "La unidad de temperatura que utiliza ElkM1.",
+                    "temperature_unit": "La unidad de temperatura que utiliza Elk-M1.",
                     "username": "Nombre de usuario"
                 },
                 "description": "La cadena de direcci\u00f3n debe tener el formato 'direcci\u00f3n[:puerto]' para 'seguro' y 'no seguro'. Ejemplo: '192.168.1.1'. El puerto es opcional y el valor predeterminado es 2101 para 'no seguro' y 2601 para 'seguro'. Para el protocolo serial, la direcci\u00f3n debe tener el formato 'tty[:baudios]'. Ejemplo: '/dev/ttyS1'. Los baudios son opcionales y el valor predeterminado es 115200.",
@@ -48,7 +48,7 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Arma el ElkM1 en modo instant\u00e1neo en casa.",
+            "description": "Arma el Elk-M1 en modo instant\u00e1neo en casa.",
             "fields": {
                 "code": {
                     "description": "C\u00f3digo de alarma para armar la central de alarma.",
@@ -58,7 +58,7 @@
             "name": "Armar en casa instant\u00e1neamente"
         },
         "alarm_arm_night_instant": {
-            "description": "Arma el ElkM1 en modo instant\u00e1neo nocturno.",
+            "description": "Arma el Elk-M1 en modo instant\u00e1neo noche.",
             "fields": {
                 "code": {
                     "description": "C\u00f3digo de alarma para armar la central de alarma.",
@@ -68,7 +68,7 @@
             "name": "Armar alarma en modo instant\u00e1neo nocturno"
         },
         "alarm_arm_vacation": {
-            "description": "Arma el ElkM1 en modo vacaciones.",
+            "description": "Arma el Elk-M1 en modo vacaciones.",
             "fields": {
                 "code": {
                     "description": "C\u00f3digo de alarma para armar la central de alarma.",
@@ -98,7 +98,7 @@
             "name": "Borrar bypass de alarma"
         },
         "alarm_display_message": {
-            "description": "Muestra un mensaje en todos los teclados ElkM1 de un \u00e1rea.",
+            "description": "Muestra un mensaje en todos los teclados Elk-M1 de un \u00e1rea.",
             "fields": {
                 "beep": {
                     "description": "0=sin pitido, 1=pitido.",
@@ -162,7 +162,7 @@
             "name": "Establecer hora"
         },
         "speak_phrase": {
-            "description": "Pronuncia una frase. Consulta la lista de frases en la documentaci\u00f3n del Protocolo ASCII ElkM1.",
+            "description": "Pronuncia una frase. Consulta la lista de frases en la documentaci\u00f3n del Protocolo ASCII Elk-M1.",
             "fields": {
                 "number": {
                     "description": "N\u00famero de frase para hablar.",
@@ -176,7 +176,7 @@
             "name": "Hablar frase"
         },
         "speak_word": {
-            "description": "Pronuncia una palabra. Consulta la lista de palabras en la documentaci\u00f3n del Protocolo ASCII ElkM1.",
+            "description": "Pronuncia una palabra. Consulta la lista de palabras en la documentaci\u00f3n del Protocolo ASCII Elk-M1.",
             "fields": {
                 "number": {
                     "description": "N\u00famero de palabra para hablar.",

homeassistant/components/elkm1/translations/et.json

@@ -1,8 +1,8 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "Selle aadressiga ElkM1 on juba seadistatud",
-            "already_configured": "Selle eesliitega ElkM1 on juba seadistatud",
+            "address_already_configured": "Selle aadressiga Elk-M1 on juba seadistatud",
+            "already_configured": "Selle eesliitega Elk-M1 on juba seadistatud",
             "already_in_progress": "Seadistamine juba k\u00e4ib",
             "cannot_connect": "\u00dchendumine nurjus",
             "invalid_auth": "Tuvastamine nurjus",
@@ -29,9 +29,9 @@
                 "data": {
                     "address": "IP-aadress v\u00f5i domeen v\u00f5i jadaport kui \u00fchendus toimub jadapordi kaudu.",
                     "password": "Salas\u00f5na",
-                    "prefix": "Unikaalne eesliide (j\u00e4ta t\u00fchjaks kui sul on ainult \u00fcks ElkM1).",
+                    "prefix": "Unikaalne eesliide (j\u00e4ta t\u00fchjaks kui sul on ainult \u00fcks Elk-M1).",
                     "protocol": "Protokoll",
-                    "temperature_unit": "Temperatuuri\u00fchik mida ElkM1 kasutab.",
+                    "temperature_unit": "Temperatuuri\u00fchik mida Elk-M1 kasutab.",
                     "username": "Kasutajanimi"
                 },
                 "description": "Turvalise ja mitteturvalise aadressi puhul peab aadressi string olema kujul 'address[:port]'. N\u00e4ide: '192.168.1.1'. Port on valikuline ja vaikimisi on see 2101 \"mitteturvalise\" ja 2601 \"turvalise\" puhul. Seeriaprotokolli puhul peab aadress olema kujul 'tty[:baud]'. N\u00e4ide: '/dev/ttyS1'. Baud on valikuline ja vaikimisi 115200.",
@@ -48,7 +48,7 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Valvastab ElkM1 koheselt koduses re\u017eiimis.",
+            "description": "Valvastab Elk-M1 koheselt koduses re\u017eiimis.",
             "fields": {
                 "code": {
                     "description": "Juhtpaneeli valvestamise kood.",
@@ -58,7 +58,7 @@
             "name": "Valvesta kohe kodus re\u017eiimis"
         },
         "alarm_arm_night_instant": {
-            "description": "Valvastab ElkM1 koheselt \u00f6ises re\u017eiimis.",
+            "description": "Valvastab Elk-M1 koheselt \u00f6ises re\u017eiimis.",
             "fields": {
                 "code": {
                     "description": "Juhtpaneeli valvestamise kood.",
@@ -68,7 +68,7 @@
             "name": "Valvesta kohe \u00f6\u00f6re\u017eiimis"
         },
         "alarm_arm_vacation": {
-            "description": "Valvestab ElkM1 puhkusere\u017eiimis.",
+            "description": "Valvestab Elk-M1 puhkusere\u017eiimis.",
             "fields": {
                 "code": {
                     "description": "Juhtpaneeli valvestamise kood.",
@@ -98,7 +98,7 @@
             "name": "H\u00e4ire l\u00f5petamise alistamine"
         },
         "alarm_display_message": {
-            "description": "Kuvab teate k\u00f5igil piirkonna ElkM1 klahvistikel.",
+            "description": "Kuvab teate k\u00f5igil piirkonna Elk-M1 klahvistikel.",
             "fields": {
                 "beep": {
                     "description": "0=piiksu pole, 1=piiks.",
@@ -162,7 +162,7 @@
             "name": "M\u00e4\u00e4ra aeg"
         },
         "speak_phrase": {
-            "description": "R\u00e4\u00e4gib fraasi. Vaadake fraaside loendit ElkM1 ASCII protokolli dokumentatsioonis.",
+            "description": "R\u00e4\u00e4gib fraasi. Vaadake fraaside loendit Elk-M1 ASCII protokolli dokumentatsioonis.",
             "fields": {
                 "number": {
                     "description": "R\u00e4\u00e4gitava lausendi number.",
@@ -176,7 +176,7 @@
             "name": "\u00dctle lausend"
         },
         "speak_word": {
-            "description": "\u00dctleb s\u00f5na. ElkM1 ASCII protokolli dokumentatsioonis on s\u00f5nade loend.",
+            "description": "\u00dctleb s\u00f5na. Elk-M1 ASCII protokolli dokumentatsioonis on s\u00f5nade loend.",
             "fields": {
                 "number": {
                     "description": "\u00d6eldava s\u00f5na number.",

homeassistant/components/elkm1/translations/fi.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "ElkM1 t\u00e4ll\u00e4 osoitteella on jo m\u00e4\u00e4ritetty",
-            "already_configured": "T\u00e4ll\u00e4 etuliitteell\u00e4 varustettu ElkM1 on jo m\u00e4\u00e4ritetty",
             "already_in_progress": "M\u00e4\u00e4ritysprosessi on jo k\u00e4ynniss\u00e4",
             "cannot_connect": "Yhteyden muodostaminen ep\u00e4onnistui",
             "invalid_auth": "Virheellinen todennus",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "IP-osoite tai verkkotunnus tai sarjaportti, jos yhteys muodostetaan sarjaliit\u00e4nn\u00e4n kautta.",
                     "password": "Salasana",
-                    "prefix": "Yksil\u00f6llinen etuliite (j\u00e4t\u00e4 tyhj\u00e4ksi, jos sinulla on vain yksi ElkM1).",
                     "protocol": "Protokolla",
-                    "temperature_unit": "L\u00e4mp\u00f6tilayksikk\u00f6, jota ElkM1 k\u00e4ytt\u00e4\u00e4.",
                     "username": "K\u00e4ytt\u00e4j\u00e4tunnus"
                 },
                 "description": "Osoitejonon on oltava muodossa 'address[:port]', kun kyseess\u00e4 on 'secure' ja 'non-secure'. Esimerkki: '192.168.1.1'. Portti on valinnainen, ja sen oletusarvo on 2101, kun kyseess\u00e4 on 'ei-turvallinen', ja 2601, kun kyseess\u00e4 on 'suojattu'. Sarjaprotokollaa varten osoitteen on oltava muodossa 'tty[:baud]'. Esimerkki: '/dev/ttyS1'. Baud on valinnainen ja sen oletusarvo on 115200.",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Viritt\u00e4\u00e4 ElkM1 kotona v\u00e4litt\u00f6m\u00e4sti.",
             "fields": {
                 "code": {
                     "name": "Koodi"
@@ -56,7 +51,6 @@
             }
         },
         "alarm_arm_night_instant": {
-            "description": "Viritt\u00e4\u00e4 ElkM1 y\u00f6ll\u00e4 v\u00e4litt\u00f6m\u00e4sti.",
             "fields": {
                 "code": {
                     "description": "Koodi h\u00e4lytyskeskuksen viritt\u00e4miseksi.",
@@ -93,7 +87,6 @@
             "name": "H\u00e4lytyksen tyhjennys ohitus"
         },
         "alarm_display_message": {
-            "description": "N\u00e4ytt\u00e4\u00e4 viestin kaikissa alueen ElkM1-n\u00e4pp\u00e4imist\u00f6iss\u00e4.",
             "fields": {
                 "beep": {
                     "description": "0 = ei piippausta, 1 = piippaus.",
@@ -156,7 +149,6 @@
             "name": "Aseta aika"
         },
         "speak_phrase": {
-            "description": "Puhuu lauseen. Katso luettelo lausekkeista ElkM1 ASCII Protocol -dokumentaatiosta.",
             "fields": {
                 "number": {
                     "description": "Puhuttava lausenumero.",
@@ -170,7 +162,6 @@
             "name": "Puhu lause"
         },
         "speak_word": {
-            "description": "Puhuu sanan. Katso sanaluettelo ElkM1 ASCII Protocol -dokumentaatiosta.",
             "fields": {
                 "number": {
                     "description": "Puhuttava sananumero.",

homeassistant/components/elkm1/translations/fr.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "Un ElkM1 avec cette adresse est d\u00e9j\u00e0 configur\u00e9",
-            "already_configured": "Un ElkM1 avec ce pr\u00e9fixe est d\u00e9j\u00e0 configur\u00e9",
             "already_in_progress": "La configuration est d\u00e9j\u00e0 en cours",
             "cannot_connect": "\u00c9chec de connexion",
             "invalid_auth": "Authentification non valide",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "L'adresse IP ou le domaine ou le port s\u00e9rie en cas de connexion via le port s\u00e9rie.",
                     "password": "Mot de passe",
-                    "prefix": "Un pr\u00e9fixe unique (laissez vide si vous n'avez qu'un seul ElkM1).",
                     "protocol": "Protocole",
-                    "temperature_unit": "L'unit\u00e9 de temp\u00e9rature utilis\u00e9e par ElkM1.",
                     "username": "Nom d'utilisateur"
                 },
                 "description": "La cha\u00eene d'adresse doit \u00eatre au format 'adresse[:port]' pour 's\u00e9curis\u00e9' et 'non s\u00e9curis\u00e9'. Exemple\u00a0: '192.168.1.1'. Le port est facultatif et sa valeur par d\u00e9faut est 2101 pour \"non s\u00e9curis\u00e9\" et 2601 pour \"s\u00e9curis\u00e9\". Pour le protocole s\u00e9rie, l'adresse doit \u00eatre sous la forme 'tty[:baud]'. Exemple\u00a0: '/dev/ttyS1'. Le baud est facultatif et sa valeur par d\u00e9faut est 115200.",

homeassistant/components/elkm1/translations/ga.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "T\u00e1 ElkM1 leis an seoladh seo cumraithe cheana f\u00e9in",
-            "already_configured": "T\u00e1 ElkM1 leis an r\u00e9im\u00edr seo cumraithe cheana f\u00e9in",
             "already_in_progress": "T\u00e1 sreabhadh cumra\u00edochta ar si\u00fal cheana f\u00e9in",
             "cannot_connect": "Theip ar an nascadh",
             "invalid_auth": "F\u00edordheimhni\u00fa neamhbhail\u00ed",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "An seoladh IP n\u00f3 an fearann n\u00f3 an port sraitheach m\u00e1 t\u00e1 t\u00fa ag ceangal tr\u00ed ch\u00f3ras sraitheach.",
                     "password": "Pasfhocal",
-                    "prefix": "R\u00e9im\u00edr uath\u00fail (f\u00e1g b\u00e1n mura bhfuil ach ElkM1 amh\u00e1in agat).",
                     "protocol": "Pr\u00f3tacal",
-                    "temperature_unit": "An t-aonad teochta a \u00fas\u00e1ideann ElkM1.",
                     "username": "Ainm \u00fas\u00e1ideora"
                 },
                 "description": "Caithfidh an teaghr\u00e1n seolta\u00ed a bheith san fhoirm 'address[:port]' le haghaidh 'sl\u00e1n' agus 'neamhshl\u00e1n'. Sampla: '192.168.1.1'. T\u00e1 an port roghnach agus is \u00e9 2101 an r\u00e9amhshocr\u00fa le haghaidh 'neamhshl\u00e1n' agus 2601 le haghaidh 'sl\u00e1n'. I gc\u00e1s an phr\u00f3tacail sraitheach, n\u00ed m\u00f3r an seoladh a bheith san fhoirm 'tty[:baud]'. Sampla: '/dev/ttyS1'. T\u00e1 an baud roghnach agus is \u00e9 115200 an r\u00e9amhshocr\u00fa.",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Arm\u00e1lann s\u00e9 an ElkM1 i m\u00f3d meandarach baile.",
             "fields": {
                 "code": {
                     "description": "C\u00f3d al\u00e1raim chun an pain\u00e9al rialaithe al\u00e1raim a arm\u00e1il.",
@@ -58,7 +53,6 @@
             "name": "L\u00e1mh al\u00e1raim sa bhaile l\u00e1ithreach"
         },
         "alarm_arm_night_instant": {
-            "description": "Arm\u00e1lann s\u00e9 an ElkM1 i m\u00f3d meandarach o\u00edche.",
             "fields": {
                 "code": {
                     "description": "C\u00f3d al\u00e1raim chun an pain\u00e9al rialaithe al\u00e1raim a arm\u00e1il.",
@@ -68,7 +62,6 @@
             "name": "L\u00e1mh al\u00e1raim o\u00edche l\u00e1ithreach"
         },
         "alarm_arm_vacation": {
-            "description": "Arm\u00e1lann s\u00e9 an ElkM1 i m\u00f3d saoire.",
             "fields": {
                 "code": {
                     "description": "C\u00f3d al\u00e1raim chun an pain\u00e9al rialaithe al\u00e1raim a arm\u00e1il.",
@@ -98,7 +91,6 @@
             "name": "Seachbh\u00f3thar soil\u00e9ir al\u00e1raim"
         },
         "alarm_display_message": {
-            "description": "Taispe\u00e1nann s\u00e9 teachtaireacht ar gach ceann de na m\u00e9archl\u00e1ir ElkM1 do cheantar.",
             "fields": {
                 "beep": {
                     "description": "0=gan b\u00edp, 1=b\u00edp.",
@@ -162,7 +154,6 @@
             "name": "Socraigh am"
         },
         "speak_phrase": {
-            "description": "Labhra\u00edonn fr\u00e1sa. F\u00e9ach liosta fr\u00e1sa\u00ed i ndoicim\u00e9ad\u00fa Pr\u00f3tacal ASCII ElkM1.",
             "fields": {
                 "number": {
                     "description": "Uimhir na fr\u00e1sa le labhairt.",
@@ -176,7 +167,6 @@
             "name": "Abair fr\u00e1sa"
         },
         "speak_word": {
-            "description": "Labhra\u00edonn focal. F\u00e9ach ar an liosta focal i ndoicim\u00e9adacht Phr\u00f3tacal ASCII ElkM1.",
             "fields": {
                 "number": {
                     "description": "Uimhir focal le labhairt.",

homeassistant/components/elkm1/translations/he.json

@@ -26,7 +26,6 @@
                 "data": {
                     "password": "\u05e1\u05d9\u05e1\u05de\u05d4",
                     "protocol": "\u05e4\u05e8\u05d5\u05d8\u05d5\u05e7\u05d5\u05dc",
-                    "temperature_unit": "\u05d9\u05d7\u05d9\u05d3\u05ea \u05d4\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05d4 \u05e9\u05d1\u05d4 \u05de\u05e9\u05ea\u05de\u05e9 ElkM1.",
                     "username": "\u05e9\u05dd \u05de\u05e9\u05ea\u05de\u05e9"
                 },
                 "title": "\u05d4\u05ea\u05d7\u05d1\u05e8 \u05d0\u05dc \u05d1\u05e7\u05e8\u05ea Elk-M1"

homeassistant/components/elkm1/translations/hu.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "Az ElkM1 ezzel a c\u00edmmel m\u00e1r konfigur\u00e1lva van",
-            "already_configured": "Az ezzel az el\u0151taggal rendelkez\u0151 ElkM1 m\u00e1r konfigur\u00e1lva van",
             "already_in_progress": "A konfigur\u00e1l\u00e1s m\u00e1r folyamatban van",
             "cannot_connect": "Sikertelen csatlakoz\u00e1s",
             "invalid_auth": "\u00c9rv\u00e9nytelen hiteles\u00edt\u00e9s",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "Az IP-c\u00edm vagy tartom\u00e1ny vagy soros port, ha soros kapcsolaton kereszt\u00fcl csatlakozik.",
                     "password": "Jelsz\u00f3",
-                    "prefix": "Egyedi el\u0151tag (hagyja \u00fcresen, ha csak egy ElkM1 van).",
                     "protocol": "Protokoll",
-                    "temperature_unit": "Az ElkM1 \u00e1ltal haszn\u00e1lt h\u0151m\u00e9rs\u00e9kleti egys\u00e9g.",
                     "username": "Felhaszn\u00e1l\u00f3n\u00e9v"
                 },
                 "description": "A c\u00edmsornak a \"biztons\u00e1gos\" \u00e9s a \"nem biztons\u00e1gos\" eset\u00e9ben is \"address[:port]\" form\u00e1j\u00fanak kell lennie. P\u00e9lda: '192.168.1.1'. A port megad\u00e1sa opcion\u00e1lis \u00e9s alap\u00e9rtelmez\u00e9s szerint 2101 a \"nem biztons\u00e1gos\", 2601 a \"biztons\u00e1gos\" eset\u00e9ben. A soros protokoll eset\u00e9ben a c\u00edmnek a 'tty[:baud]' form\u00e1j\u00fanak kell lennie. P\u00e9lda: '/dev/ttyS1'. A baud nem k\u00f6telez\u0151 \u00e9s alap\u00e9rtelmez\u00e9s szerint 115200.",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "\u00c9les\u00edtse az ElkM1 rendszert azonnali otthoni m\u00f3dban.",
             "fields": {
                 "code": {
                     "description": "Riaszt\u00f3k\u00f3d a riaszt\u00f3 vez\u00e9rl\u0151panel \u00e9les\u00edt\u00e9s\u00e9hez.",
@@ -58,7 +53,6 @@
             "name": "Otthoni m\u00f3dban azonnali \u00e9les\u00edt\u00e9s"
         },
         "alarm_arm_night_instant": {
-            "description": "\u00c9les\u00edti az ElkM1-et azonnali \u00e9jszakai m\u00f3dban.",
             "fields": {
                 "code": {
                     "description": "Riaszt\u00f3k\u00f3d a riaszt\u00f3 vez\u00e9rl\u0151panel \u00e9les\u00edt\u00e9s\u00e9hez.",
@@ -68,7 +62,6 @@
             "name": "\u00c9jszakai m\u00f3dban azonnali \u00e9les\u00edt\u00e9s"
         },
         "alarm_arm_vacation": {
-            "description": "\u00c9les\u00edti az ElkM1-et vak\u00e1ci\u00f3 m\u00f3dban.",
             "fields": {
                 "code": {
                     "description": "Riaszt\u00f3k\u00f3d a riaszt\u00f3 vez\u00e9rl\u0151panel \u00e9les\u00edt\u00e9s\u00e9hez.",
@@ -98,7 +91,6 @@
             "name": "Riaszt\u00f3 kihagy\u00e1s m\u00f3d t\u00f6rl\u00e9se"
         },
         "alarm_display_message": {
-            "description": "Megjelen\u00edt egy \u00fczenetet egy ter\u00fclet \u00f6sszes ElkM1 billenty\u0171zet\u00e9n.",
             "fields": {
                 "beep": {
                     "description": "0 = nincs hangjelz\u00e9s, 1 = hangjelz\u00e9s.",
@@ -162,7 +154,6 @@
             "name": "Id\u0151 be\u00e1ll\u00edt\u00e1sa"
         },
         "speak_phrase": {
-            "description": "Kimond egy mondatot. L\u00e1sd a mondatok list\u00e1j\u00e1t az ElkM1 ASCII protokoll dokument\u00e1ci\u00f3j\u00e1ban.",
             "fields": {
                 "number": {
                     "description": "Mondatsz\u00e1m a besz\u00e9dhez.",
@@ -176,7 +167,6 @@
             "name": "Mondat kimond\u00e1s"
         },
         "speak_word": {
-            "description": "Kimond egy sz\u00f3t. L\u00e1sd a szavak list\u00e1j\u00e1t az ElkM1 ASCII protokoll dokument\u00e1ci\u00f3ban.",
             "fields": {
                 "number": {
                     "description": "Sz\u00f3sz\u00e1m a besz\u00e9dhez.",

homeassistant/components/elkm1/translations/id.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "ElkM1 dengan alamat ini sudah dikonfigurasi",
-            "already_configured": "ElkM1 dengan prefiks ini sudah dikonfigurasi",
             "already_in_progress": "Alur konfigurasi sedang berlangsung",
             "cannot_connect": "Gagal terhubung",
             "invalid_auth": "Autentikasi tidak valid",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "Alamat IP atau domain atau port serial jika terhubung melalui serial.",
                     "password": "Kata Sandi",
-                    "prefix": "Prefiks unik (kosongkan jika hanya ada satu ElkM1).",
                     "protocol": "Protokol",
-                    "temperature_unit": "Unit suhu yang digunakan ElkM1.",
                     "username": "Nama Pengguna"
                 },
                 "description": "String alamat harus dalam format 'alamat[:port]' untuk 'aman' dan 'tidak aman'. Misalnya, '192.168.1.1'. Port bersifat opsional dan nilai baku adalah 2101 untuk 'tidak aman' dan 2601 untuk 'aman'. Untuk protokol serial, alamat harus dalam format 'tty[:baud]'. Misalnya, '/dev/ttyS1'. Baud bersifat opsional dan nilai bakunya adalah 115200.",

homeassistant/components/elkm1/translations/it.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "Un ElkM1 con questo indirizzo \u00e8 gi\u00e0 configurato",
-            "already_configured": "Un ElkM1 con questo prefisso \u00e8 gi\u00e0 configurato",
             "already_in_progress": "Il flusso di configurazione \u00e8 gi\u00e0 in corso",
             "cannot_connect": "Impossibile connettersi",
             "invalid_auth": "Autenticazione non valida",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "L'indirizzo IP o il dominio o la porta seriale in caso di connessione tramite seriale.",
                     "password": "Password",
-                    "prefix": "Un prefisso univoco (lascia vuoto se hai solo un ElkM1).",
                     "protocol": "Protocollo",
-                    "temperature_unit": "L'unit\u00e0 di temperatura utilizzata da ElkM1.",
                     "username": "Nome utente"
                 },
                 "description": "La stringa dell'indirizzo deve essere nel formato 'indirizzo[:porta]' per 'sicuro' e 'non-sicuro'. Esempio: '192.168.1.1'. La porta \u00e8 facoltativa e per impostazione predefinita \u00e8 2101 per 'non-sicuro' e 2601 per 'sicuro'. Per il protocollo seriale, l'indirizzo deve essere nel formato 'tty[:baud]'. Esempio: '/dev/ttyS1'. Il baud \u00e8 opzionale e il valore predefinito \u00e8 115200.",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "Arma l'ElkM1 in modalit\u00e0 istantanea in casa.",
             "fields": {
                 "code": {
                     "name": "Codice"
@@ -56,7 +51,6 @@
             }
         },
         "alarm_arm_night_instant": {
-            "description": "Arma ElkM1 in modalit\u00e0 notte istantanea.",
             "fields": {
                 "code": {
                     "description": "Un codice per inserire la centrale di allarme.",
@@ -93,7 +87,6 @@
             "name": "Allarme cancellazione esclusione "
         },
         "alarm_display_message": {
-            "description": "Visualizza un messaggio su tutte le tastiere ElkM1 per un'area.",
             "fields": {
                 "beep": {
                     "description": "0=nessun segnale acustico, 1=segnale acustico.",
@@ -156,7 +149,6 @@
             "name": "Imposta l'ora"
         },
         "speak_phrase": {
-            "description": "Pronuncia una frase. Vedere l'elenco delle frasi nella documentazione del protocollo ASCII ElkM1.",
             "fields": {
                 "number": {
                     "description": "Numero di frase da pronunciare.",
@@ -170,7 +162,6 @@
             "name": "Pronuncia frase"
         },
         "speak_word": {
-            "description": "Pronuncia una parola. Vedere l'elenco delle parole nella documentazione del protocollo ASCII ElkM1.",
             "fields": {
                 "number": {
                     "description": "Numero di parole da pronunciare.",

homeassistant/components/elkm1/translations/ja.json

@@ -1,8 +1,6 @@
 {
     "config": {
         "abort": {
-            "address_already_configured": "\u3053\u306e\u30a2\u30c9\u30ec\u30b9\u306eElkM1\u306f\u3059\u3067\u306b\u8a2d\u5b9a\u3055\u308c\u3066\u3044\u307e\u3059",
-            "already_configured": "\u3053\u306e\u30d7\u30ec\u30d5\u30a3\u30c3\u30af\u30b9\u3092\u6301\u3064ElkM1\u306f\u3059\u3067\u306b\u8a2d\u5b9a\u3055\u308c\u3066\u3044\u307e\u3059",
             "already_in_progress": "\u69cb\u6210\u30d5\u30ed\u30fc\u306f\u3059\u3067\u306b\u9032\u884c\u4e2d\u3067\u3059",
             "cannot_connect": "\u63a5\u7d9a\u306b\u5931\u6557\u3057\u307e\u3057\u305f",
             "invalid_auth": "\u7121\u52b9\u306a\u8a8d\u8a3c",
@@ -29,9 +27,7 @@
                 "data": {
                     "address": "IP\u30a2\u30c9\u30ec\u30b9\u307e\u305f\u306f\u30c9\u30e1\u30a4\u30f3\u3001\u3082\u3057\u304f\u306f\u30b7\u30ea\u30a2\u30eb\u3067\u63a5\u7d9a\u3059\u308b\u5834\u5408\u306b\u306f\u30b7\u30ea\u30a2\u30eb\u30dd\u30fc\u30c8\u3002",
                     "password": "\u30d1\u30b9\u30ef\u30fc\u30c9",
-                    "prefix": "\u30e6\u30cb\u30fc\u30af(\u4e00\u610f)\u306a\u30d7\u30ec\u30d5\u30a3\u30c3\u30af\u30b9(\u63a5\u982d\u8f9e)(ElkM1\u304c1\u3064\u306e\u5834\u5408\u306f\u7a7a\u767d\u306e\u307e\u307e)",
                     "protocol": "\u30d7\u30ed\u30c8\u30b3\u30eb",
-                    "temperature_unit": "ElkM1\u304c\u4f7f\u7528\u3059\u308b\u6e29\u5ea6\u5358\u4f4d\u3002",
                     "username": "\u30e6\u30fc\u30b6\u30fc\u540d"
                 },
                 "description": "\u30a2\u30c9\u30ec\u30b9\u6587\u5b57\u5217\u306f\u3001 '\u30bb\u30ad\u30e5\u30a2 '\u304a\u3088\u3073 '\u975e\u30bb\u30ad\u30e5\u30a2 '\u306e\u5834\u5408\u306f\u3001'address[:port]'\u306e\u5f62\u5f0f\u3067\u3042\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u3002\u4f8b: '192.168.1.1'\u3002\u30dd\u30fc\u30c8\u306f\u30aa\u30d7\u30b7\u30e7\u30f3\u3067\u3001\u30c7\u30d5\u30a9\u30eb\u30c8\u306f'\u975e\u30bb\u30ad\u30e5\u30a2'\u306e\u5834\u5408\u306f\u30012101 \u3067'\u30bb\u30ad\u30e5\u30a2'\u306e\u5834\u5408\u306f\u30012601 \u3067\u3059\u3002\u30b7\u30ea\u30a2\u30eb\u30d7\u30ed\u30c8\u30b3\u30eb\u306e\u5834\u5408\u3001\u30a2\u30c9\u30ec\u30b9\u306f\u3001'tty[:baud]' \u306e\u5f62\u5f0f\u3067\u3042\u308b\u5fc5\u8981\u304c\u3042\u308a\u307e\u3059\u3002\u4f8b: '/dev/ttyS1'\u3002\u30dc\u30fc(baud)\u306f\u30aa\u30d7\u30b7\u30e7\u30f3\u3067\u3001\u30c7\u30d5\u30a9\u30eb\u30c8\u306f115200\u3067\u3059\u3002",
@@ -48,7 +44,6 @@
     },
     "services": {
         "alarm_arm_home_instant": {
-            "description": "ElkM1 \u3092\u30db\u30fc\u30e0\u30a4\u30f3\u30b9\u30bf\u30f3\u30c8\u30e2\u30fc\u30c9\u3067\u8b66\u6212\u3057\u307e\u3059\u3002",
             "fields": {
                 "code": {
                     "name": "\u30b3\u30fc\u30c9"
@@ -57,7 +52,6 @@
             "name": "\u30a2\u30e9\u30fc\u30e0\u30a2\u30fc\u30e0\u30db\u30fc\u30e0\u30a4\u30f3\u30b9\u30bf\u30f3\u30c8"
         },
         "alarm_arm_night_instant": {
-            "description": "ElkM1 \u3092\u591c\u9593\u30a4\u30f3\u30b9\u30bf\u30f3\u30c8 \u30e2\u30fc\u30c9\u3067\u8b66\u6212\u3057\u307e\u3059\u3002",
             "fields": {
                 "code": {
                     "description": "\u30a2\u30e9\u30fc\u30e0\u30b3\u30f3\u30c8\u30ed\u30fc\u30eb\u30d1\u30cd\u30eb\u3092\u4f5c\u52d5\u3055\u305b\u308b\u305f\u3081\u306e\u30b3\u30fc\u30c9\u3002",
@@ -67,7 +61,6 @@
             "name": "\u30a2\u30e9\u30fc\u30e0\u8b66\u6212 \u591c\u9593\u30a4\u30f3\u30b9\u30bf\u30f3\u30c8"
         },
         "alarm_arm_vacation": {
-            "description": "ElkM1 \u3092\u30d0\u30b1\u30fc\u30b7\u30e7\u30f3\u30e2\u30fc\u30c9\u306b\u3059\u308b\u3002",
             "fields": {
                 "code": {
                     "description": "\u30a2\u30e9\u30fc\u30e0\u30b3\u30f3\u30c8\u30ed\u30fc\u30eb\u30d1\u30cd\u30eb\u3092\u4f5c\u52d5\u3055\u305b\u308b\u305f\u3081\u306e\u30b3\u30fc\u30c9\u3002",
@@ -95,7 +88,6 @@
             "name": "\u30a2\u30e9\u30fc\u30e0\u30af\u30ea\u30a2\u30d0\u30a4\u30d1\u30b9"
         },
         "alarm_display_message": {
-            "description": "\u30a8\u30ea\u30a2\u306e\u3059\u3079\u3066\u306e ElkM1 \u30ad\u30fc\u30d1\u30c3\u30c9\u306b\u30e1\u30c3\u30bb\u30fc\u30b8\u3092\u8868\u793a\u3057\u307e\u3059\u3002",
             "fields": {
                 "beep": {
                     "description": "0=\u30d3\u30fc\u30d7\u97f3\u306a\u3057\u30011=\u30d3\u30fc\u30d7\u97f3\u3002",
@@ -158,7 +150,6 @@
             "name": "\u6642\u9593\u3092\u8a2d\u5b9a"
         },
         "speak_phrase": {
-            "description": "\u30d5\u30ec\u30fc\u30ba\u3092\u8a71\u3057\u307e\u3059\u3002 ElkM1 ASCII \u30d7\u30ed\u30c8\u30b3\u30eb\u306e\u30c9\u30ad\u30e5\u30e1\u30f3\u30c8\u306e\u30d5\u30ec\u30fc\u30ba\u306e\u30ea\u30b9\u30c8\u3092\u53c2\u7167\u3057\u3066\u304f\u3060\u3055\u3044\u3002",
             "fields": {
                 "number": {
                     "description": "\u8a71\u3059\u30d5\u30ec\u30fc\u30ba\u756a\u53f7\u3002",
@@ -172,7 +163,6 @@
             "name": "\u30d5\u30ec\u30fc\u30ba\u3092\u8a71\u3059"
         },
         "speak_word": {
-            "description": "\u8a00\u8449\u3092\u8a71\u3057\u307e\u3059\u3002 ElkM1 ASCII \u30d7\u30ed\u30c8\u30b3\u30eb\u306e\u30c9\u30ad\u30e5\u30e1\u30f3\u30c8\u306e\u5358\u8a9e\u30ea\u30b9\u30c8\u3092\u53c2\u7167\u3057\u3066\u304f\u3060\u3055\u3044\u3002",
             "fields": {
                 "number": {
                     "description": "\u8a71\u3059\u5358\u8a9e\u306e\u756a\u53f7\u3002",