homeassistant 2025.12.0b2__py3-none-any.whl → 2025.12.0b8__py3-none-any.whl

homeassistant/components/wled/translations/en.json

@@ -1,13 +1,18 @@
 {
+    "common": {
+        "unsupported_version": "The WLED device's firmware version is not supported."
+    },
     "config": {
         "abort": {
             "already_configured": "Device is already configured",
             "cannot_connect": "Failed to connect",
             "reconfigure_successful": "Re-configuration was successful",
-            "unique_id_mismatch": "MAC address does not match the configured device. Expected to connect to device with MAC: `{expected_mac}`, but connected to device with MAC: `{actual_mac}`. \n\nPlease ensure you reconfigure against the same device."
+            "unique_id_mismatch": "MAC address does not match the configured device. Expected to connect to device with MAC: `{expected_mac}`, but connected to device with MAC: `{actual_mac}`. \n\nPlease ensure you reconfigure against the same device.",
+            "unsupported_version": "The WLED device's firmware version is not supported."
         },
         "error": {
-            "cannot_connect": "Failed to connect"
+            "cannot_connect": "Failed to connect",
+            "unsupported_version": "The WLED device's firmware version is not supported."
         },
         "flow_title": "{name}",
         "step": {
@@ -138,6 +143,9 @@
         },
         "mac_address_mismatch": {
             "message": "MAC address does not match the configured device. Expected to connect to device with MAC: {expected_mac}, but connected to device with MAC: {actual_mac}."
+        },
+        "unsupported_version": {
+            "message": "The WLED device's firmware version is not supported: {error}"
         }
     },
     "options": {

homeassistant/components/wled/translations/es.json

@@ -1,11 +1,18 @@
 {
+    "common": {
+        "unsupported_version": "La versi\u00f3n de firmware del dispositivo WLED no es compatible."
+    },
     "config": {
         "abort": {
             "already_configured": "El dispositivo ya est\u00e1 configurado",
-            "cannot_connect": "No se pudo conectar"
+            "cannot_connect": "No se pudo conectar",
+            "reconfigure_successful": "Se volvi\u00f3 a configurar correctamente",
+            "unique_id_mismatch": "La direcci\u00f3n MAC no coincide con el dispositivo configurado. Se esperaba la conexi\u00f3n al dispositivo con la direcci\u00f3n MAC: `{expected_mac}`, pero se conect\u00f3 al dispositivo con MAC: `{actual_mac}`. \n \nPor favor, aseg\u00farate de volver a configurar contra el mismo dispositivo.",
+            "unsupported_version": "La versi\u00f3n de firmware del dispositivo WLED no es compatible."
         },
         "error": {
-            "cannot_connect": "No se pudo conectar"
+            "cannot_connect": "No se pudo conectar",
+            "unsupported_version": "La versi\u00f3n de firmware del dispositivo WLED no es compatible."
         },
         "flow_title": "{name}",
         "step": {
@@ -133,6 +140,12 @@
         },
         "invalid_response_wled_error": {
             "message": "Respuesta no v\u00e1lida de la API de WLED: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "La direcci\u00f3n MAC no coincide con el dispositivo configurado. Se esperaba la conexi\u00f3n al dispositivo con la MAC: {expected_mac}, pero se conect\u00f3 al dispositivo con MAC: {actual_mac}."
+        },
+        "unsupported_version": {
+            "message": "La versi\u00f3n de firmware del dispositivo WLED no es compatible: {error}"
         }
     },
     "options": {

homeassistant/components/wled/translations/ga.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "T\u00e1 an gl\u00e9as cumraithe cheana f\u00e9in",
-            "cannot_connect": "Theip ar an nascadh"
+            "cannot_connect": "Theip ar an nascadh",
+            "reconfigure_successful": "D'\u00e9irigh leis an athchumr\u00fa",
+            "unique_id_mismatch": "N\u00ed hionann an seoladh MAC agus an gl\u00e9as cumraithe. Bh\u00edothas ag s\u00fail le ceangal leis an ngl\u00e9as le MAC: `{expected_mac}`, ach bh\u00edothas ceangailte leis an ngl\u00e9as le MAC: `{actual_mac}`.\n\nCinntigh le do thoil go nd\u00e9anann t\u00fa athchumr\u00fa i gcoinne an ghl\u00e9is ch\u00e9anna."
         },
         "error": {
             "cannot_connect": "Theip ar an nascadh"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Freagra neamhbhail\u00ed \u00f3 API WLED: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "N\u00ed hionann an seoladh MAC agus an gl\u00e9as cumraithe. Bh\u00edothas ag s\u00fail le ceangal leis an ngl\u00e9as le MAC: {expected_mac}, ach bh\u00edothas ceangailte leis an ngl\u00e9as le MAC: {actual_mac}."
         }
     },
     "options": {

homeassistant/components/wled/translations/it.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Il dispositivo \u00e8 gi\u00e0 configurato",
-            "cannot_connect": "Impossibile connettersi"
+            "cannot_connect": "Impossibile connettersi",
+            "reconfigure_successful": "La riconfigurazione \u00e8 avvenuta con successo",
+            "unique_id_mismatch": "L'indirizzo MAC non coincide con quello del dispositivo configurato. Era prevista la connessione al dispositivo con MAC: `{expected_mac}`, ma la connessione \u00e8 avvenuta al dispositivo con MAC: `{actual_mac}`. \n \nVerifica di eseguire la riconfigurazione sullo stesso dispositivo."
         },
         "error": {
             "cannot_connect": "Impossibile connettersi"
@@ -99,6 +101,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Risposta non valida dall'API WLED: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "L'indirizzo MAC non corrisponde al dispositivo configurato. \u00c8 prevista la connessione al dispositivo con MAC: {expected_mac}, ma connesso al dispositivo con MAC: {actual_mac}."
         }
     },
     "options": {

homeassistant/components/wled/translations/lt.json

@@ -1,11 +1,18 @@
 {
+    "common": {
+        "unsupported_version": "WLED \u012frenginio programin\u0117s \u012frangos versija nepalaikoma."
+    },
     "config": {
         "abort": {
             "already_configured": "Prietaisas jau sukonfig\u016bruotas",
-            "cannot_connect": "Nepavyko prisijungti"
+            "cannot_connect": "Nepavyko prisijungti",
+            "reconfigure_successful": "Pakartotinis konfig\u016bravimas buvo s\u0117kmingas",
+            "unique_id_mismatch": "MAC adresas neatitinka sukonfig\u016bruoto \u012frenginio. Tikimasi, kad bus prisijungta prie \u012frenginio, kurio MAC adresas: `{expected_mac}`, bet prijungtas prie \u012frenginio su MAC kodu: `{actual_mac}`. \n \n \u012esitikinkite, kad i\u0161 naujo sukonfig\u016bruojate t\u0105 pat\u012f \u012frengin\u012f.",
+            "unsupported_version": "WLED \u012frenginio programin\u0117s \u012frangos versija nepalaikoma."
         },
         "error": {
-            "cannot_connect": "Nepavyko prisijungti"
+            "cannot_connect": "Nepavyko prisijungti",
+            "unsupported_version": "WLED \u012frenginio programin\u0117s \u012frangos versija nepalaikoma."
         },
         "flow_title": "{name}",
         "step": {
@@ -133,6 +140,12 @@
         },
         "invalid_response_wled_error": {
             "message": "Neteisingas WLED API atsakymas: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC adresas neatitinka sukonfig\u016bruoto \u012frenginio. Tikimasi, kad bus prisijungta prie \u012frenginio, kurio MAC adresas: {expected_mac}, bet prijungtas prie \u012frenginio su MAC adresu: {actual_mac}."
+        },
+        "unsupported_version": {
+            "message": "WLED \u012frenginio programin\u0117s \u012frangos versija nepalaikoma: {error}"
         }
     },
     "options": {

homeassistant/components/wled/translations/nl.json

@@ -2,7 +2,8 @@
     "config": {
         "abort": {
             "already_configured": "Apparaat is al geconfigureerd",
-            "cannot_connect": "Kan geen verbinding maken"
+            "cannot_connect": "Kan geen verbinding maken",
+            "reconfigure_successful": "Herconfiguratie was succesvol"
         },
         "error": {
             "cannot_connect": "Kan geen verbinding maken"

homeassistant/components/wled/translations/pl.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Urz\u0105dzenie jest ju\u017c skonfigurowane",
-            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia"
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia",
+            "reconfigure_successful": "Ponowna konfiguracja si\u0119 powiod\u0142a",
+            "unique_id_mismatch": "Adres MAC nie pasuje do skonfigurowanego urz\u0105dzenia. Oczekiwano po\u0142\u0105czenia z urz\u0105dzeniem o adresie MAC: `{expected_mac}`, ale po\u0142\u0105czono z urz\u0105dzeniem o adresie MAC: `{actual_mac}`. \n\nUpewnij si\u0119, \u017ce konfigurujesz ponownie to samo urz\u0105dzenie."
         },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia"
@@ -44,5 +46,10 @@
                 }
             }
         }
+    },
+    "exceptions": {
+        "mac_address_mismatch": {
+            "message": "Adres MAC nie pasuje do skonfigurowanego urz\u0105dzenia. Oczekiwano po\u0142\u0105czenia z urz\u0105dzeniem o adresie MAC: {expected_mac}, ale po\u0142\u0105czono si\u0119 z urz\u0105dzeniem o adresie MAC: {actual_mac}."
+        }
     }
 }

homeassistant/components/wled/translations/pt.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Dispositivo j\u00e1 configurado",
-            "cannot_connect": "A liga\u00e7\u00e3o falhou"
+            "cannot_connect": "A liga\u00e7\u00e3o falhou",
+            "reconfigure_successful": "A reconfigura\u00e7\u00e3o foi bem sucedida",
+            "unique_id_mismatch": "O endere\u00e7o MAC n\u00e3o corresponde ao dispositivo configurado. Esperava-se ligar ao dispositivo com MAC: `{expected_mac}`, mas ligou-se ao dispositivo com MAC: `{actual_mac}`. \n\nCertifique-se de que efetua a reconfigura\u00e7\u00e3o com o mesmo dispositivo."
         },
         "error": {
             "cannot_connect": "A liga\u00e7\u00e3o falhou"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "Resposta inv\u00e1lida da API WLED: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "O endere\u00e7o MAC n\u00e3o corresponde ao dispositivo configurado. Esperava-se ligar ao dispositivo com MAC: {expected_mac}, mas ligou-se ao dispositivo com MAC: {actual_mac}."
         }
     },
     "options": {

homeassistant/components/wled/translations/ru.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "\u042d\u0442\u043e \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e \u0443\u0436\u0435 \u0434\u043e\u0431\u0430\u0432\u043b\u0435\u043d\u043e \u0432 Home Assistant",
-            "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f"
+            "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f",
+            "reconfigure_successful": "\u041f\u043e\u0432\u0442\u043e\u0440\u043d\u0430\u044f \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430 \u0443\u0441\u043f\u0435\u0448\u043d\u043e",
+            "unique_id_mismatch": "MAC-\u0430\u0434\u0440\u0435\u0441 \u043d\u0435 \u0441\u043e\u043e\u0442\u0432\u0435\u0442\u0441\u0442\u0432\u0443\u0435\u0442 \u043d\u0430\u0441\u0442\u0440\u043e\u0435\u043d\u043d\u043e\u043c\u0443 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443. \u041e\u0436\u0438\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 \u0441 MAC: `{expected_mac}`, \u043d\u043e \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u043e \u043a \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 \u0441 MAC: `{actual_mac}`. \n\n\u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u0432\u044b \u0432\u044b\u043f\u043e\u043b\u043d\u044f\u0435\u0442\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0443 \u0434\u043b\u044f \u0442\u043e\u0433\u043e \u0436\u0435 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430."
         },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f"
@@ -124,11 +126,28 @@
             }
         }
     },
+    "exceptions": {
+        "connection_error": {
+            "message": "\u041e\u0448\u0438\u0431\u043a\u0430 \u0441\u0432\u044f\u0437\u0438 \u0441 API WLED: {error}"
+        },
+        "invalid_response_github_error": {
+            "message": "\u041d\u0435\u0432\u0435\u0440\u043d\u044b\u0439 \u043e\u0442\u0432\u0435\u0442 \u043e\u0442 API GitHub: {error}"
+        },
+        "invalid_response_wled_error": {
+            "message": "\u041d\u0435\u0432\u0435\u0440\u043d\u044b\u0439 \u043e\u0442\u0432\u0435\u0442 \u043e\u0442 API WLED: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC-\u0430\u0434\u0440\u0435\u0441 \u043d\u0435 \u0441\u043e\u043e\u0442\u0432\u0435\u0442\u0441\u0442\u0432\u0443\u0435\u0442 \u043d\u0430\u0441\u0442\u0440\u043e\u0435\u043d\u043d\u043e\u043c\u0443 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443. \u041e\u0436\u0438\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 \u0441 MAC: {expected_mac}, \u043d\u043e \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u043e \u043a \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0443 \u0441 MAC: {actual_mac}."
+        }
+    },
     "options": {
         "step": {
             "init": {
                 "data": {
                     "keep_master_light": "\u0414\u043e\u0431\u0430\u0432\u043b\u044f\u0442\u044c '\u041e\u0441\u043d\u043e\u0432\u043d\u043e\u0439' \u044d\u043b\u0435\u043c\u0435\u043d\u0442 \u0443\u043f\u0440\u0430\u0432\u043b\u0435\u043d\u0438\u044f \u0434\u0430\u0436\u0435 \u043f\u0440\u0438 \u043e\u0434\u043d\u043e\u043c \u0441\u0435\u0433\u043c\u0435\u043d\u0442\u0435"
+                },
+                "data_description": {
+                    "keep_master_light": "\u0413\u0430\u0440\u0430\u043d\u0442\u0438\u0440\u0443\u0435\u0442, \u0447\u0442\u043e \u043e\u0441\u043d\u043e\u0432\u043d\u043e\u0435 \u0443\u043f\u0440\u0430\u0432\u043b\u0435\u043d\u0438\u0435 \u043e\u0441\u0432\u0435\u0449\u0435\u043d\u0438\u0435\u043c \u0432\u0441\u0435\u0433\u0434\u0430 \u0434\u043e\u0441\u0442\u0443\u043f\u043d\u043e, \u043a\u043e\u0433\u0434\u0430 \u0432\u044b \u0434\u0438\u043d\u0430\u043c\u0438\u0447\u0435\u0441\u043a\u0438 \u0434\u043e\u0431\u0430\u0432\u043b\u044f\u0435\u0442\u0435 \u0438 \u0443\u0434\u0430\u043b\u044f\u0435\u0442\u0435 \u0441\u0435\u0433\u043c\u0435\u043d\u0442\u044b \u0447\u0435\u0440\u0435\u0437 \u0430\u0432\u0442\u043e\u043c\u0430\u0442\u0438\u0437\u0430\u0446\u0438\u044e."
                 }
             }
         }

homeassistant/components/wled/translations/sk.json

@@ -1,13 +1,18 @@
 {
+    "common": {
+        "unsupported_version": "Verzia firmv\u00e9ru zariadenia WLED nie je podporovan\u00e1."
+    },
     "config": {
         "abort": {
             "already_configured": "Zariadenie u\u017e je nakonfigurovan\u00e9",
             "cannot_connect": "Nepodarilo sa pripoji\u0165",
             "reconfigure_successful": "Rekonfigur\u00e1cia bola \u00faspe\u0161n\u00e1",
-            "unique_id_mismatch": "Adresa MAC sa nezhoduje s nakonfigurovan\u00fdm zariaden\u00edm. O\u010dak\u00e1valo sa pripojenie k zariadeniu s MAC: `{expected_mac}`, ale pripojilo sa k zariadeniu s MAC: `{actual_mac}`. \n\nZabezpe\u010dte op\u00e4tovn\u00fa konfigur\u00e1ciu vo\u010di tomu ist\u00e9mu zariadeniu."
+            "unique_id_mismatch": "Adresa MAC sa nezhoduje s nakonfigurovan\u00fdm zariaden\u00edm. O\u010dak\u00e1valo sa pripojenie k zariadeniu s MAC: `{expected_mac}`, ale pripojilo sa k zariadeniu s MAC: `{actual_mac}`. \n\nZabezpe\u010dte op\u00e4tovn\u00fa konfigur\u00e1ciu vo\u010di tomu ist\u00e9mu zariadeniu.",
+            "unsupported_version": "Verzia firmv\u00e9ru zariadenia WLED nie je podporovan\u00e1."
         },
         "error": {
-            "cannot_connect": "Nepodarilo sa pripoji\u0165"
+            "cannot_connect": "Nepodarilo sa pripoji\u0165",
+            "unsupported_version": "Verzia firmv\u00e9ru zariadenia WLED nie je podporovan\u00e1."
         },
         "flow_title": "{name}",
         "step": {
@@ -138,6 +143,9 @@
         },
         "mac_address_mismatch": {
             "message": "Adresa MAC sa nezhoduje s nakonfigurovan\u00fdm zariaden\u00edm. O\u010dak\u00e1va sa pripojenie k zariadeniu s MAC: {expected_mac}, ale pripojil sa k zariadeniu s adresou MAC: {actual_mac}."
+        },
+        "unsupported_version": {
+            "message": "Verzia firmv\u00e9ru zariadenia WLED nie je podporovan\u00e1: {error}"
         }
     },
     "options": {

homeassistant/components/wled/translations/tr.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "Cihaz zaten yap\u0131land\u0131r\u0131lm\u0131\u015f",
-            "cannot_connect": "Ba\u011flanma hatas\u0131"
+            "cannot_connect": "Ba\u011flanma hatas\u0131",
+            "reconfigure_successful": "Yeniden yap\u0131land\u0131rma ba\u015far\u0131l\u0131 oldu",
+            "unique_id_mismatch": "MAC adresi yap\u0131land\u0131r\u0131lan cihazla e\u015fle\u015fmiyor. MAC'li cihaza ba\u011flan\u0131lmas\u0131 bekleniyor: `{expected_mac}`, ancak MAC ile cihaza ba\u011fl\u0131: `{actual_mac}`. \n \n L\u00fctfen ayn\u0131 cihaza g\u00f6re yeniden yap\u0131land\u0131rma yapt\u0131\u011f\u0131n\u0131zdan emin olun."
         },
         "error": {
             "cannot_connect": "Ba\u011flanma hatas\u0131"
@@ -123,5 +125,28 @@
                 "name": "Senkronizasyon g\u00f6nder"
             }
         }
+    },
+    "exceptions": {
+        "connection_error": {
+            "message": "WLED API ile ileti\u015fimde hata olu\u015ftu: {error}"
+        },
+        "invalid_response_github_error": {
+            "message": "GitHub API'sinden ge\u00e7ersiz yan\u0131t: {error}"
+        },
+        "invalid_response_wled_error": {
+            "message": "WLED API'sinden ge\u00e7ersiz yan\u0131t: {error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC adresi yap\u0131land\u0131r\u0131lan cihazla e\u015fle\u015fmiyor. MAC adresine sahip cihaza ba\u011flan\u0131lmas\u0131 bekleniyor: {expected_mac}, ancak MAC ile cihaza ba\u011fl\u0131: {actual_mac}."
+        }
+    },
+    "options": {
+        "step": {
+            "init": {
+                "data_description": {
+                    "keep_master_light": "Otomasyon yoluyla segmentleri dinamik olarak eklerken ve \u00e7\u0131kar\u0131rken ana \u0131\u015f\u0131k kontrol\u00fcn\u00fcn her zaman kullan\u0131labilir olmas\u0131n\u0131 sa\u011flar."
+                }
+            }
+        }
     }
 }

homeassistant/components/wled/translations/zh-Hans.json

@@ -2,7 +2,9 @@
     "config": {
         "abort": {
             "already_configured": "\u8bbe\u5907\u5df2\u914d\u7f6e",
-            "cannot_connect": "\u8fde\u63a5\u5931\u8d25"
+            "cannot_connect": "\u8fde\u63a5\u5931\u8d25",
+            "reconfigure_successful": "\u91cd\u65b0\u914d\u7f6e\u6210\u529f",
+            "unique_id_mismatch": "MAC \u5730\u5740\u4e0e\u914d\u7f6e\u7684\u8bbe\u5907\u4e0d\u5339\u914d\u3002\u9884\u671f\u8fde\u63a5\u5230 MAC \u5730\u5740\u4e3a\uff1a{expected_mac}\uff0c\u4f46\u5df2\u8fde\u63a5\u5230\u5177\u6709\u4ee5\u4e0b MAC \u5730\u5740\u7684\u8bbe\u5907\uff1a{actual_mac} \u3002 \n \n\u8bf7\u786e\u4fdd\u60a8\u4f7f\u7528\u540c\u4e00\u8bbe\u5907\u91cd\u65b0\u914d\u7f6e\u3002"
         },
         "error": {
             "cannot_connect": "\u8fde\u63a5\u5931\u8d25"
@@ -133,6 +135,9 @@
         },
         "invalid_response_wled_error": {
             "message": "WLED API \u8fd4\u56de\u65e0\u6548\u54cd\u5e94\uff1a{error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC \u5730\u5740\u4e0e\u914d\u7f6e\u7684\u8bbe\u5907\u4e0d\u5339\u914d\u3002\u9884\u671f\u8fde\u63a5\u7684\u8bbe\u5907 MAC \u5730\u5740\u4e3a\uff1a{expected_mac}\uff0c\u4f46\u5df2\u8fde\u63a5\u5230\u5177\u6709\u4ee5\u4e0b MAC \u5730\u5740\u7684\u8bbe\u5907\uff1a{actual_mac} \u3002"
         }
     },
     "options": {

homeassistant/components/wled/translations/zh-Hant.json

@@ -1,11 +1,18 @@
 {
+    "common": {
+        "unsupported_version": "\u4e0d\u652f\u63f4\u6b64 WLED \u88dd\u7f6e\u7684\u97cc\u9ad4\u7248\u672c\u3002"
+    },
     "config": {
         "abort": {
             "already_configured": "\u88dd\u7f6e\u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
-            "cannot_connect": "\u9023\u7dda\u5931\u6557"
+            "cannot_connect": "\u9023\u7dda\u5931\u6557",
+            "reconfigure_successful": "\u91cd\u65b0\u8a2d\u5b9a\u6210\u529f",
+            "unique_id_mismatch": "MAC \u4f4d\u5740\u8207\u5df2\u8a2d\u5b9a\u7684\u88dd\u7f6e\u4e0d\u7b26\u3002\u9810\u671f\u9023\u7dda\u88dd\u7f6e MAC \u4f4d\u5740\uff1a`{expected_mac}` \uff0c\u4f46\u5be6\u969b\u9023\u7dda\u88dd\u7f6e MAC \u4f4d\u5740\uff1a`{actual_mac}` \u3002\n\n\u8acb\u78ba\u8a8d\u4f7f\u7528\u76f8\u540c\u88dd\u7f6e\u91cd\u65b0\u8a2d\u5b9a\u3002",
+            "unsupported_version": "\u4e0d\u652f\u63f4\u6b64 WLED \u88dd\u7f6e\u7684\u97cc\u9ad4\u7248\u672c\u3002"
         },
         "error": {
-            "cannot_connect": "\u9023\u7dda\u5931\u6557"
+            "cannot_connect": "\u9023\u7dda\u5931\u6557",
+            "unsupported_version": "\u4e0d\u652f\u63f4\u6b64 WLED \u88dd\u7f6e\u7684\u97cc\u9ad4\u7248\u672c\u3002"
         },
         "flow_title": "{name}",
         "step": {
@@ -133,6 +140,12 @@
         },
         "invalid_response_wled_error": {
             "message": "WLED API \u50b3\u56de\u7121\u6548\u56de\u61c9\uff1a{error}"
+        },
+        "mac_address_mismatch": {
+            "message": "MAC \u4f4d\u5740\u8207\u5df2\u8a2d\u5b9a\u7684\u88dd\u7f6e\u4e0d\u7b26\u3002\u9810\u671f\u9023\u7dda\u81f3 MAC \u4f4d\u5740\u70ba {expected_mac}\u7684\u88dd\u7f6e\uff0c\u4f46\u5be6\u969b\u9023\u7dda\u81f3 MAC \u4f4d\u5740\u70ba {actual_mac}\u7684\u88dd\u7f6e\u3002"
+        },
+        "unsupported_version": {
+            "message": "\u4e0d\u652f\u63f4\u6b64 WLED \u88dd\u7f6e\u7684\u97cc\u9ad4\u7248\u672c\uff1a{error}"
         }
     },
     "options": {

homeassistant/components/wled/update.py

@@ -102,7 +102,7 @@ class WLEDUpdateEntity(WLEDEntity, UpdateEntity):
         """URL to the full release notes of the latest version available."""
         if (version := self.latest_version) is None:
             return None
-        return f"https://github.com/Aircoookie/WLED/releases/tag/v{version}"
+        return f"https://github.com/wled/WLED/releases/tag/v{version}"
 
     @wled_exception_handler
     async def async_install(

homeassistant/components/workday/translations/tr.json

@@ -51,6 +51,11 @@
                     }
                 }
             }
+        },
+        "calendar": {
+            "workday": {
+                "name": "Takvim"
+            }
         }
     },
     "issues": {

homeassistant/components/xbox/translations/es.json

@@ -7,7 +7,9 @@
             "oauth_error": "Se han recibido datos de token no v\u00e1lidos.",
             "oauth_failed": "Error al obtener el token de acceso.",
             "oauth_timeout": "Tiempo de espera agotado mientras se resolv\u00eda el token OAuth.",
-            "oauth_unauthorized": "Error de autorizaci\u00f3n OAuth al obtener el token de acceso."
+            "oauth_unauthorized": "Error de autorizaci\u00f3n OAuth al obtener el token de acceso.",
+            "reauth_successful": "La autenticaci\u00f3n se volvi\u00f3 a realizar correctamente",
+            "unique_id_mismatch": "La cuenta ({gamertag}) que usaste no es la que configuraste previamente. Por favor, inicia sesi\u00f3n de nuevo con la cuenta correcta."
         },
         "create_entry": {
             "default": "Autenticado correctamente"
@@ -25,6 +27,10 @@
                     "implementation": "Las credenciales que quieres utilizar para autenticarte."
                 },
                 "title": "Selecciona el m\u00e9todo de autenticaci\u00f3n"
+            },
+            "reauth_confirm": {
+                "description": "La integraci\u00f3n de Xbox necesita volver a autenticar tu cuenta",
+                "title": "Autenticaci\u00f3n caducada para {name}"
             }
         }
     },
@@ -73,6 +79,9 @@
                 "name": "Seguidos",
                 "unit_of_measurement": "personas"
             },
+            "free_storage": {
+                "name": "Espacio libre - {name}"
+            },
             "friends": {
                 "name": "Amigos",
                 "unit_of_measurement": "personas"
@@ -129,6 +138,9 @@
             },
             "status": {
                 "name": "Estado"
+            },
+            "total_storage": {
+                "name": "Espacio total - {name}"
             }
         }
     },
@@ -136,6 +148,9 @@
         "account_not_configured": {
             "message": "La cuenta de Xbox no est\u00e1 configurada."
         },
+        "auth_exception": {
+            "message": "Error de autenticaci\u00f3n en Xbox Network, se requiere una nueva autenticaci\u00f3n"
+        },
         "media_not_found": {
             "message": "No se pudo encontrar el medio solicitado."
         },

homeassistant/components/xbox/translations/ga.json

@@ -7,7 +7,9 @@
             "oauth_error": "Fuarthas sonra\u00ed comhartha neamhbhail\u00ed.",
             "oauth_failed": "Earr\u00e1id agus comhartha rochtana \u00e1 fh\u00e1il.",
             "oauth_timeout": "Am cr\u00edochnaithe ag r\u00e9iteach comhartha OAuth.",
-            "oauth_unauthorized": "Earr\u00e1id \u00fadaraithe OAuth agus comhartha rochtana \u00e1 fh\u00e1il."
+            "oauth_unauthorized": "Earr\u00e1id \u00fadaraithe OAuth agus comhartha rochtana \u00e1 fh\u00e1il.",
+            "reauth_successful": "D'\u00e9irigh leis an athfh\u00edordheimhni\u00fa",
+            "unique_id_mismatch": "N\u00ed h\u00e9 an cuntas ({gamertag}) a d'\u00fas\u00e1id t\u00fa an ceann a chumra\u00edodh roimhe seo. S\u00ednigh isteach ar\u00eds leis an gcuntas ceart, le do thoil."
         },
         "create_entry": {
             "default": "F\u00edordheimhnithe go rath\u00fail"
@@ -22,6 +24,10 @@
                     "implementation": "Na dinti\u00fair is mian leat a \u00fas\u00e1id chun f\u00edordheimhni\u00fa."
                 },
                 "title": "Roghnaigh modh f\u00edordheimhnithe"
+            },
+            "reauth_confirm": {
+                "description": "Caithfidh an comhth\u00e1th\u00fa Xbox do chuntas a athfh\u00edordheimhni\u00fa",
+                "title": "T\u00e1 an f\u00edordheimhni\u00fa imithe in \u00e9ag do {name}"
             }
         }
     },
@@ -139,6 +145,9 @@
         "account_not_configured": {
             "message": "N\u00edl an cuntas Xbox cumraithe."
         },
+        "auth_exception": {
+            "message": "Theip ar fh\u00edordheimhni\u00fa l\u00edonra Xbox, athfh\u00edordheimhni\u00fa ag teast\u00e1il"
+        },
         "media_not_found": {
             "message": "N\u00edorbh fh\u00e9idir na me\u00e1in iarrtha a aimsi\u00fa."
         },

homeassistant/components/xbox/translations/tr.json

@@ -1,6 +1,7 @@
 {
     "config": {
         "abort": {
+            "already_configured": "Hesap zaten yap\u0131land\u0131r\u0131lm\u0131\u015f",
             "authorize_url_timeout": "Yetkilendirme URL'si olu\u015ftururken zaman a\u015f\u0131m\u0131.",
             "missing_configuration": "Bile\u015fen yap\u0131land\u0131r\u0131lmam\u0131\u015f. L\u00fctfen belgeleri takip edin.",
             "oauth_error": "Ge\u00e7ersiz anahtar verileri al\u0131nd\u0131.",
@@ -14,6 +15,10 @@
             "default": "Ba\u015far\u0131yla do\u011fruland\u0131"
         },
         "step": {
+            "oauth_discovery": {
+                "description": "Home Assistant a\u011f\u0131n\u0131zda bir Xbox cihaz\u0131 buldu. Xbox entegrasyonunu kurmaya devam etmek i\u00e7in **G\u00f6nder**'e bas\u0131n.",
+                "title": "Xbox cihaz\u0131 ke\u015ffedildi"
+            },
             "pick_implementation": {
                 "data_description": {
                     "implementation": "Kimlik do\u011frulamas\u0131 i\u00e7in kullanmak istedi\u011finiz kimlik bilgileri."
@@ -28,29 +33,135 @@
     },
     "entity": {
         "binary_sensor": {
+            "has_game_pass": {
+                "name": "Xbox Game Pass'e abone olundu"
+            },
+            "in_game": {
+                "name": "\u00c7ok oyunculu modda"
+            },
             "online": {
                 "state_attributes": {
+                    "bio": {
+                        "name": "Biyografi"
+                    },
+                    "display_name": {
+                        "name": "Ekran ad\u0131"
+                    },
                     "location": {
                         "name": "Konum"
+                    },
+                    "real_name": {
+                        "name": "Ger\u00e7ek isim"
                     }
                 }
             }
         },
+        "image": {
+            "avatar": {
+                "name": "Avatar"
+            },
+            "gamerpic": {
+                "name": "Gamerpic"
+            },
+            "now_playing": {
+                "name": "\u015eimdi oynat\u0131l\u0131yor"
+            }
+        },
         "sensor": {
+            "follower": {
+                "name": "Takip\u00e7i",
+                "unit_of_measurement": "insanlar"
+            },
+            "following": {
+                "name": "Takip ediliyor",
+                "unit_of_measurement": "insanlar"
+            },
             "free_storage": {
                 "name": "Bo\u015f alan - {name}"
             },
+            "friends": {
+                "name": "Arkada\u015flar",
+                "unit_of_measurement": "insanlar"
+            },
+            "gamer_score": {
+                "name": "Oyuncu puan\u0131",
+                "unit_of_measurement": "puanlar"
+            },
+            "in_party": {
+                "name": "Partide",
+                "unit_of_measurement": "insanlar"
+            },
+            "join_restrictions": {
+                "name": "Partiye kat\u0131l\u0131m k\u0131s\u0131tlamalar\u0131",
+                "state": {
+                    "invite_only": "Yaln\u0131zca davetliler",
+                    "joinable": "Birle\u015ftirilebilir"
+                }
+            },
+            "last_online": {
+                "name": "Son \u00e7evrimi\u00e7i"
+            },
+            "now_playing": {
+                "name": "\u015eimdi oynat\u0131l\u0131yor",
+                "state_attributes": {
+                    "achievements": {
+                        "name": "Ba\u015far\u0131lar"
+                    },
+                    "developer": {
+                        "name": "Geli\u015ftirici"
+                    },
+                    "gamerscore": {
+                        "name": "Oyuncu puan\u0131"
+                    },
+                    "genres": {
+                        "name": "T\u00fcrler"
+                    },
+                    "min_age": {
+                        "name": "Minimum ya\u015f"
+                    },
+                    "progress": {
+                        "name": "\u0130lerleme"
+                    },
+                    "publisher": {
+                        "name": "Yay\u0131nc\u0131"
+                    },
+                    "release_date": {
+                        "name": "Yay\u0131n tarihi"
+                    },
+                    "short_description": {
+                        "name": "K\u0131sa a\u00e7\u0131klama"
+                    }
+                }
+            },
+            "status": {
+                "name": "Durum"
+            },
             "total_storage": {
                 "name": "Toplam alan - {name}"
             }
         }
     },
     "exceptions": {
+        "account_not_configured": {
+            "message": "Xbox hesab\u0131 yap\u0131land\u0131r\u0131lmam\u0131\u015f."
+        },
         "auth_exception": {
             "message": "Xbox Network kimlik do\u011frulamas\u0131 ba\u015far\u0131s\u0131z oldu, yeniden kimlik do\u011frulamas\u0131 gerekiyor"
         },
+        "media_not_found": {
+            "message": "\u0130stenilen medya bulunamad\u0131."
+        },
         "oauth2_implementation_unavailable": {
             "message": "OAuth2 uygulamas\u0131 kullan\u0131lam\u0131yor, yeniden denenecek"
+        },
+        "request_exception": {
+            "message": "Xbox Network'e ba\u011flan\u0131lamad\u0131"
+        },
+        "timeout_exception": {
+            "message": "Ba\u011flant\u0131 zaman a\u015f\u0131m\u0131 nedeniyle Xbox Network'e ba\u011flan\u0131lamad\u0131"
+        },
+        "xbox_not_configured": {
+            "message": "Xbox entegrasyonu yap\u0131land\u0131r\u0131lmam\u0131\u015f."
         }
     }
 }

homeassistant/components/xiaomi_ble/manifest.json

@@ -23,6 +23,7 @@
   "config_flow": true,
   "dependencies": ["bluetooth_adapters"],
   "documentation": "https://www.home-assistant.io/integrations/xiaomi_ble",
+  "integration_type": "device",
   "iot_class": "local_push",
   "requirements": ["xiaomi-ble==1.2.0"]
 }