homeassistant 2025.12.0b2__py3-none-any.whl → 2025.12.0b8__py3-none-any.whl

homeassistant/components/openai_conversation/translations/tr.json

@@ -15,6 +15,9 @@
     },
     "config_subentries": {
         "ai_task_data": {
+            "error": {
+                "web_search_minimal_reasoning": "Web aramas\u0131 \u015fu anda asgari d\u00fczeyde ak\u0131l y\u00fcr\u00fctme \u00e7abas\u0131yla desteklenmiyor"
+            },
             "step": {
                 "model": {
                     "data": {
@@ -28,7 +31,8 @@
         },
         "conversation": {
             "error": {
-                "model_not_supported": "Bu model desteklenmiyor, l\u00fctfen farkl\u0131 bir model se\u00e7in"
+                "model_not_supported": "Bu model desteklenmiyor, l\u00fctfen farkl\u0131 bir model se\u00e7in",
+                "web_search_minimal_reasoning": "Web aramas\u0131 \u015fu anda asgari d\u00fczeyde ak\u0131l y\u00fcr\u00fctme \u00e7abas\u0131yla desteklenmiyor"
             },
             "initiate_flow": {
                 "reconfigure": "Konu\u015fma arac\u0131s\u0131n\u0131 yeniden yap\u0131land\u0131r\u0131n",
@@ -82,6 +86,7 @@
     "selector": {
         "reasoning_effort": {
             "options": {
+                "minimal": "Minimal",
                 "none": "Hi\u00e7biri"
             }
         }

homeassistant/components/openrgb/translations/tr.json

@@ -0,0 +1,84 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Cihaz zaten yap\u0131land\u0131r\u0131lm\u0131\u015f",
+            "reconfigure_successful": "Yeniden yap\u0131land\u0131rma ba\u015far\u0131l\u0131 oldu"
+        },
+        "error": {
+            "cannot_connect": "Ba\u011flanma hatas\u0131",
+            "invalid_host": "Ge\u00e7ersiz ana bilgisayar ad\u0131 veya IP adresi",
+            "unknown": "Beklenmeyen hata"
+        },
+        "step": {
+            "reconfigure": {
+                "data": {
+                    "host": "Sunucu",
+                    "port": "Port"
+                },
+                "data_description": {
+                    "host": "OpenRGB SDK sunucusunu \u00e7al\u0131\u015ft\u0131ran bilgisayar\u0131n IP adresi veya ana bilgisayar ad\u0131.",
+                    "port": "OpenRGB SDK sunucusunun \u00e7al\u0131\u015ft\u0131\u011f\u0131 port numaras\u0131."
+                },
+                "description": "OpenRGB SDK sunucunuzun ba\u011flant\u0131 ayarlar\u0131n\u0131 g\u00fcncelleyin.",
+                "title": "OpenRGB SDK sunucusunu yeniden yap\u0131land\u0131r\u0131n"
+            },
+            "user": {
+                "data": {
+                    "host": "Sunucu",
+                    "name": "Ad",
+                    "port": "Port"
+                },
+                "data_description": {
+                    "host": "OpenRGB SDK sunucusunu \u00e7al\u0131\u015ft\u0131ran bilgisayar\u0131n IP adresi veya ana bilgisayar ad\u0131.",
+                    "name": "Bu entegrasyon giri\u015fi i\u00e7in bir ad, \u00f6rne\u011fin OpenRGB SDK sunucusunu \u00e7al\u0131\u015ft\u0131ran bilgisayar\u0131n ad\u0131.",
+                    "port": "OpenRGB SDK sunucusunun \u00e7al\u0131\u015ft\u0131\u011f\u0131 port numaras\u0131."
+                },
+                "description": "Home Assistant i\u00e7inden kontrole izin vermek i\u00e7in OpenRGB SDK sunucunuzu ayarlay\u0131n.",
+                "title": "OpenRGB SDK sunucusunu kurun"
+            }
+        }
+    },
+    "entity": {
+        "light": {
+            "openrgb_light": {
+                "state_attributes": {
+                    "effect": {
+                        "state": {
+                            "breathing": "Nefes al",
+                            "chase": "Takip et",
+                            "chase_fade": "Kovalamaca solma",
+                            "cram": "T\u0131k\u0131nma",
+                            "flashing": "Yan\u0131p s\u00f6nen",
+                            "music": "M\u00fczik",
+                            "neon": "Neon",
+                            "rainbow": "G\u00f6kku\u015fa\u011f\u0131",
+                            "random": "Rastgele",
+                            "random_flicker": "Rastgele titre\u015fim",
+                            "scan": "Tarama",
+                            "spectrum_cycle": "Spektrum d\u00f6ng\u00fcs\u00fc",
+                            "spring": "\u0130lkbahar",
+                            "stack": "Y\u0131\u011f\u0131n",
+                            "strobe": "Fla\u015f\u00f6r",
+                            "water": "Su",
+                            "wave": "Dalga"
+                        }
+                    }
+                }
+            }
+        }
+    },
+    "exceptions": {
+        "communication_error": {
+            "message": "OpenRGB SDK sunucusuyla ileti\u015fim kurulamad\u0131 {server_address}: {error}"
+        },
+        "effect_no_color_support": {
+            "message": "Etkisi `{effect}` renk denetimini desteklemiyor {device_name}"
+        },
+        "openrgb_error": {
+            "message": "Bir OpenRGB hatas\u0131 olu\u015ftu: {error}"
+        },
+        "unsupported_effect": {
+            "message": "Etkisi `{effect}` taraf\u0131ndan desteklenmiyor {device_name}"
+        }
+    }
+}

homeassistant/components/opentherm_gw/services.py

@@ -237,7 +237,13 @@ def async_setup_services(hass: HomeAssistant) -> None:
         await gw_hub.gateway.set_gpio_mode(gpio_id, gpio_mode)
 
     hass.services.async_register(
-        DOMAIN, SERVICE_SET_GPIO_MODE, set_gpio_mode, service_set_gpio_mode_schema
+        DOMAIN,
+        SERVICE_SET_GPIO_MODE,
+        set_gpio_mode,
+        service_set_gpio_mode_schema,
+        description_placeholders={
+            "gpio_modes_documentation_url": "https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes"
+        },
     )
 
     async def set_led_mode(call: ServiceCall) -> None:
@@ -248,7 +254,13 @@ def async_setup_services(hass: HomeAssistant) -> None:
         await gw_hub.gateway.set_led_mode(led_id, led_mode)
 
     hass.services.async_register(
-        DOMAIN, SERVICE_SET_LED_MODE, set_led_mode, service_set_led_mode_schema
+        DOMAIN,
+        SERVICE_SET_LED_MODE,
+        set_led_mode,
+        service_set_led_mode_schema,
+        description_placeholders={
+            "led_modes_documentation_url": "https://www.home-assistant.io/integrations/opentherm_gw/#led-modes"
+        },
     )
 
     async def set_max_mod(call: ServiceCall) -> None:
@@ -294,4 +306,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
         SERVICE_SEND_TRANSP_CMD,
         send_transparent_cmd,
         service_send_transp_cmd_schema,
+        description_placeholders={
+            "opentherm_gateway_firmware_url": "https://otgw.tclcode.com/firmware.html"
+        },
     )

homeassistant/components/opentherm_gw/strings.json

@@ -386,7 +386,7 @@
       "name": "Reset gateway"
     },
     "send_transparent_command": {
-      "description": "Sends custom otgw commands (https://otgw.tclcode.com/firmware.html) through a transparent interface.",
+      "description": "Sends custom OTGW commands ({opentherm_gateway_firmware_url}) through a transparent interface.",
       "fields": {
         "gateway_id": {
           "description": "[%key:component::opentherm_gw::services::reset_gateway::fields::gateway_id::description%]",
@@ -461,7 +461,7 @@
           "name": "ID"
         },
         "mode": {
-          "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes for an explanation of the values.",
+          "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See {gpio_modes_documentation_url} for an explanation of the values.",
           "name": "[%key:common::config_flow::data::mode%]"
         }
       },
@@ -507,7 +507,7 @@
           "name": "ID"
         },
         "mode": {
-          "description": "The function to assign to the LED. See https://www.home-assistant.io/integrations/opentherm_gw/#led-modes for an explanation of the values.",
+          "description": "The function to assign to the LED. See {led_modes_documentation_url} for an explanation of the values.",
           "name": "[%key:common::config_flow::data::mode%]"
         }
       },

homeassistant/components/opentherm_gw/translations/cs.json

@@ -386,7 +386,7 @@
             "name": "Resetovat br\u00e1nu"
         },
         "send_transparent_command": {
-            "description": "Odes\u00edl\u00e1 vlastn\u00ed p\u0159\u00edkazy otgw (https://otgw.tclcode.com/firmware.html) prost\u0159ednictv\u00edm transparentn\u00edho rozhran\u00ed.",
+            "description": "Odes\u00edl\u00e1 vlastn\u00ed OTGW p\u0159\u00edkazy ({opentherm_gateway_firmware_url}) prost\u0159ednictv\u00edm transparentn\u00edho rozhran\u00ed.",
             "fields": {
                 "gateway_id": {
                     "description": "ID br\u00e1ny OpenTherm.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Re\u017eim pro nastaven\u00ed na pinu GPIO. Jsou akceptov\u00e1ny hodnoty 0 a\u017e 6 pro ob\u011b GPIO, 7 je akceptov\u00e1na jen pro GPIO \"B\". Vysv\u011btlen\u00ed hodnot najdete na https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
+                    "description": "Re\u017eim, kter\u00fd se m\u00e1 nastavit na pinu GPIO. Hodnoty 0 a\u017e 6 jsou akceptov\u00e1ny pro oba GPIO, 7 je akceptov\u00e1na jen pro GPIO \"B\". Viz {gpio_modes_documentation_url} pro vysv\u011btlen\u00ed hodnot.",
                     "name": "Re\u017eim"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Funkce, kter\u00e1 se m\u00e1 p\u0159i\u0159adit k LED. Vysv\u011btlen\u00ed hodnot najdete na https://www.home-assistant.io/integrations/opentherm_gw/#led-modes.",
+                    "description": "Funkce, kter\u00e1 se m\u00e1 p\u0159i\u0159adit LED diod\u011b. Viz {led_modes_documentation_url} pro vysv\u011btlen\u00ed hodnot.",
                     "name": "Re\u017eim"
                 }
             },

homeassistant/components/opentherm_gw/translations/de.json

@@ -386,7 +386,7 @@
             "name": "Gateway zur\u00fccksetzen"
         },
         "send_transparent_command": {
-            "description": "Sendet benutzerdefinierte OTGW-Befehle (https://otgw.tclcode.com/firmware.html) \u00fcber eine transparente Schnittstelle.",
+            "description": "Sendet benutzerdefinierte OTGW-Befehle ({opentherm_gateway_firmware_url}) \u00fcber eine transparente Schnittstelle.",
             "fields": {
                 "gateway_id": {
                     "description": "Die ID des OpenTherm-Gateways.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Modus, der f\u00fcr den GPIO-Pin eingestellt werden soll. Die Werte 0 bis 6 werden f\u00fcr beide GPIOs akzeptiert, 7 wird nur f\u00fcr GPIO \u201eB\u201c akzeptiert. Siehe https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes f\u00fcr eine Erl\u00e4uterung der Werte.",
+                    "description": "Modus, der f\u00fcr den GPIO-Pin eingestellt werden soll. Die Werte 0 bis 6 werden f\u00fcr beide GPIOs akzeptiert, 7 wird nur f\u00fcr GPIO \u201eB\u201c akzeptiert. Eine Erl\u00e4uterung der Werte findest du unter {gpio_modes_documentation_url}.",
                     "name": "Modus"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Die der LED zuzuweisende Funktion. Eine Erl\u00e4uterung der Werte findest du unter https://www.home-assistant.io/integrations/opentherm_gw/#led-modes",
+                    "description": "Die der LED zuzuweisende Funktion. Eine Erl\u00e4uterung der Werte findest du unter {led_modes_documentation_url}.",
                     "name": "Modus"
                 }
             },

homeassistant/components/opentherm_gw/translations/el.json

@@ -386,7 +386,7 @@
             "name": "\u0395\u03c0\u03b1\u03bd\u03b1\u03c6\u03bf\u03c1\u03ac gateway"
         },
         "send_transparent_command": {
-            "description": "\u03a3\u03c4\u03ad\u03bb\u03bd\u03b5\u03b9 \u03c0\u03c1\u03bf\u03c3\u03b1\u03c1\u03bc\u03bf\u03c3\u03bc\u03ad\u03bd\u03b5\u03c2 \u03b5\u03bd\u03c4\u03bf\u03bb\u03ad\u03c2 otgw (https://otgw.tclcode.com/firmware.html) \u03bc\u03ad\u03c3\u03c9 \u03bc\u03b9\u03b1\u03c2 \u03b4\u03b9\u03b1\u03c6\u03b1\u03bd\u03bf\u03cd\u03c2 \u03b4\u03b9\u03b5\u03c0\u03b1\u03c6\u03ae\u03c2.",
+            "description": "\u03a3\u03c4\u03ad\u03bb\u03bd\u03b5\u03b9 \u03c0\u03c1\u03bf\u03c3\u03b1\u03c1\u03bc\u03bf\u03c3\u03bc\u03ad\u03bd\u03b5\u03c2 \u03b5\u03bd\u03c4\u03bf\u03bb\u03ad\u03c2 OTGW ({opentherm_gateway_firmware_url}) \u03bc\u03ad\u03c3\u03c9 \u03bc\u03b9\u03b1\u03c2 \u03b4\u03b9\u03b1\u03c6\u03b1\u03bd\u03bf\u03cd\u03c2 \u03b4\u03b9\u03b5\u03c0\u03b1\u03c6\u03ae\u03c2.",
             "fields": {
                 "gateway_id": {
                     "description": "\u03a4\u03bf ID \u03c4\u03bf\u03c5 OpenTherm Gateway.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bf\u03c5 \u03b8\u03b1 \u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af \u03c3\u03c4\u03bf\u03bd \u03b1\u03ba\u03c1\u03bf\u03b4\u03ad\u03ba\u03c4\u03b7 GPIO. \u039f\u03b9 \u03c4\u03b9\u03bc\u03ad\u03c2 0 \u03ad\u03c9\u03c2 6 \u03b3\u03af\u03bd\u03bf\u03bd\u03c4\u03b1\u03b9 \u03b4\u03b5\u03ba\u03c4\u03ad\u03c2 \u03ba\u03b1\u03b9 \u03b3\u03b9\u03b1 \u03c4\u03b1 \u03b4\u03cd\u03bf GPIO, \u03b5\u03bd\u03ce \u03b7 \u03c4\u03b9\u03bc\u03ae 7 \u03b3\u03af\u03bd\u03b5\u03c4\u03b1\u03b9 \u03b4\u03b5\u03ba\u03c4\u03ae \u03bc\u03cc\u03bd\u03bf \u03b3\u03b9\u03b1 \u03c4\u03bf GPIO \"B\". \u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03bf https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes \u03b3\u03b9\u03b1 \u03b5\u03c0\u03b5\u03be\u03ae\u03b3\u03b7\u03c3\u03b7 \u03c4\u03c9\u03bd \u03c4\u03b9\u03bc\u03ce\u03bd.",
+                    "description": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bf\u03c5 \u03b8\u03b1 \u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af \u03c3\u03c4\u03bf\u03bd \u03b1\u03ba\u03c1\u03bf\u03b4\u03ad\u03ba\u03c4\u03b7 GPIO. \u039f\u03b9 \u03c4\u03b9\u03bc\u03ad\u03c2 0 \u03ad\u03c9\u03c2 6 \u03b3\u03af\u03bd\u03bf\u03bd\u03c4\u03b1\u03b9 \u03b4\u03b5\u03ba\u03c4\u03ad\u03c2 \u03ba\u03b1\u03b9 \u03b3\u03b9\u03b1 \u03c4\u03b1 \u03b4\u03cd\u03bf GPIO, \u03b7 \u03c4\u03b9\u03bc\u03ae 7 \u03b3\u03af\u03bd\u03b5\u03c4\u03b1\u03b9 \u03b4\u03b5\u03ba\u03c4\u03ae \u03bc\u03cc\u03bd\u03bf \u03b3\u03b9\u03b1 \u03c4\u03bf GPIO \"B\". \u0394\u03b5\u03af\u03c4\u03b5 {gpio_modes_documentation_url} \u03b3\u03b9\u03b1 \u03bc\u03b9\u03b1 \u03b5\u03be\u03ae\u03b3\u03b7\u03c3\u03b7 \u03c4\u03c9\u03bd \u03c4\u03b9\u03bc\u03ce\u03bd.",
                     "name": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "\u0397 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bf\u03c5 \u03b8\u03b1 \u03b5\u03ba\u03c7\u03c9\u03c1\u03b7\u03b8\u03b5\u03af \u03c3\u03c4\u03bf LED. \u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03bf https://www.home-assistant.io/integrations/opentherm_gw/#led-modes \u03b3\u03b9\u03b1 \u03b5\u03c0\u03b5\u03be\u03ae\u03b3\u03b7\u03c3\u03b7 \u03c4\u03c9\u03bd \u03c4\u03b9\u03bc\u03ce\u03bd.",
+                    "description": "\u0397 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bf\u03c5 \u03b8\u03b1 \u03b5\u03ba\u03c7\u03c9\u03c1\u03b7\u03b8\u03b5\u03af \u03c3\u03c4\u03bf LED. \u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03b7 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 {led_modes_documentation_url} \u03b3\u03b9\u03b1 \u03b5\u03c0\u03b5\u03be\u03ae\u03b3\u03b7\u03c3\u03b7 \u03c4\u03c9\u03bd \u03c4\u03b9\u03bc\u03ce\u03bd.",
                     "name": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1"
                 }
             },

homeassistant/components/opentherm_gw/translations/en-GB.json

@@ -386,7 +386,7 @@
             "name": "Reset gateway"
         },
         "send_transparent_command": {
-            "description": "Sends custom otgw commands (https://otgw.tclcode.com/firmware.html) through a transparent interface.",
+            "description": "Sends custom OTGW commands ({opentherm_gateway_firmware_url}) through a transparent interface.",
             "fields": {
                 "gateway_id": {
                     "description": "The ID of the OpenTherm Gateway.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes for an explanation of the values.",
+                    "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See {gpio_modes_documentation_url} for an explanation of the values.",
                     "name": "Mode"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "The function to assign to the LED. See https://www.home-assistant.io/integrations/opentherm_gw/#led-modes for an explanation of the values.",
+                    "description": "The function to assign to the LED. See {led_modes_documentation_url} for an explanation of the values.",
                     "name": "Mode"
                 }
             },

homeassistant/components/opentherm_gw/translations/en.json

@@ -386,7 +386,7 @@
             "name": "Reset gateway"
         },
         "send_transparent_command": {
-            "description": "Sends custom otgw commands (https://otgw.tclcode.com/firmware.html) through a transparent interface.",
+            "description": "Sends custom OTGW commands ({opentherm_gateway_firmware_url}) through a transparent interface.",
             "fields": {
                 "gateway_id": {
                     "description": "The ID of the OpenTherm Gateway.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes for an explanation of the values.",
+                    "description": "Mode to set on the GPIO pin. Values 0 through 6 are accepted for both GPIOs, 7 is only accepted for GPIO \"B\". See {gpio_modes_documentation_url} for an explanation of the values.",
                     "name": "Mode"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "The function to assign to the LED. See https://www.home-assistant.io/integrations/opentherm_gw/#led-modes for an explanation of the values.",
+                    "description": "The function to assign to the LED. See {led_modes_documentation_url} for an explanation of the values.",
                     "name": "Mode"
                 }
             },

homeassistant/components/opentherm_gw/translations/es.json

@@ -386,7 +386,7 @@
             "name": "Restablecer puerta de enlace"
         },
         "send_transparent_command": {
-            "description": "Env\u00eda comandos otgw personalizados (https://otgw.tclcode.com/firmware.html) a trav\u00e9s de una interfaz transparente.",
+            "description": "Env\u00eda comandos OTGW personalizados ({opentherm_gateway_firmware_url}) a trav\u00e9s de una interfaz transparente.",
             "fields": {
                 "gateway_id": {
                     "description": "El ID del OpenTherm Gateway.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Modo que se debe configurar en el pin GPIO. Los valores del 0 al 6 se aceptan para ambos GPIO, el 7 solo se acepta para GPIO \"B\". Consulta https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes para obtener una explicaci\u00f3n de los valores.",
+                    "description": "Modo para configurar en el pin GPIO. Los valores del 0 al 6 se aceptan para ambos GPIO; el 7 solo se acepta para el GPIO \"B\". Consulta {gpio_modes_documentation_url} para una explicaci\u00f3n de los valores.",
                     "name": "Modo"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "La funci\u00f3n que se debe asignar al LED. Consulta https://www.home-assistant.io/integrations/opentherm_gw/#led-modes para obtener una explicaci\u00f3n de los valores.",
+                    "description": "La funci\u00f3n que se asignar\u00e1 al LED. Consulta {led_modes_documentation_url} para una explicaci\u00f3n de los valores.",
                     "name": "Modo"
                 }
             },

homeassistant/components/opentherm_gw/translations/et.json

@@ -386,7 +386,7 @@
             "name": "L\u00e4htesta l\u00fc\u00fcs"
         },
         "send_transparent_command": {
-            "description": "Saadab l\u00e4bipaistva liidese kaudu kohandatud otgw-k\u00e4ske (https://otgw.tclcode.com/firmware.html).",
+            "description": "Saadab kohandatud OTGW k\u00e4ske ({opentherm_gateway_firmware_url}) l\u00e4bipaistva liidese kaudu.",
             "fields": {
                 "gateway_id": {
                     "description": "OpenTherm Gateway l\u00fc\u00fcsi ID.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "GPIO viigui seadistamise re\u017eiim. V\u00e4\u00e4rtused 0 kuni 6 aktsepteeritakse m\u00f5lema GPIO puhul, 7 aktsepteeritakse ainult GPIO \"B\" puhul. V\u00e4\u00e4rtuste selgituse leiad https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
+                    "description": "Re\u017eiim, mida GPIO viigule m\u00e4\u00e4rata. V\u00e4\u00e4rtused 0 kuni 6 on lubatud m\u00f5lema GPIO puhul, 7 on lubatud ainult GPIO \"B\" puhul. Vt {gpio_modes_documentation_url} v\u00e4\u00e4rtuste selgitamiseks.",
                     "name": "Re\u017eiim"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Funktsioon, mis m\u00e4\u00e4ratakse LED-ile. Vt https://www.home-assistant.io/integrations/opentherm_gw/#led-modes v\u00e4\u00e4rtuste selgitamiseks.",
+                    "description": "LED-ile m\u00e4\u00e4ratav funktsioon. Vt {led_modes_documentation_url} v\u00e4\u00e4rtuste selgituse saamiseks.",
                     "name": "Re\u017eiim"
                 }
             },

homeassistant/components/opentherm_gw/translations/ga.json

@@ -386,7 +386,6 @@
             "name": "Athshocraigh an geata"
         },
         "send_transparent_command": {
-            "description": "Seolann s\u00e9 orduithe saincheaptha otgw (https://otgw.tclcode.com/firmware.html) tr\u00ed chomh\u00e9adan tr\u00e9dhearcach.",
             "fields": {
                 "gateway_id": {
                     "description": "Aitheantas Gheata OpenTherm.",
@@ -461,7 +460,6 @@
                     "name": "Aitheantas"
                 },
                 "mode": {
-                    "description": "M\u00f3d le socr\u00fa ar an bior\u00e1n GPIO. Glactar le luachanna 0 go 6 do na GPIOanna araon, n\u00ed ghlactar le 7 ach amh\u00e1in do GPIO \"B\". F\u00e9ach https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes le haghaidh m\u00edni\u00fa ar na luachanna.",
                     "name": "M\u00f3d"
                 }
             },
@@ -507,7 +505,6 @@
                     "name": "Aitheantas"
                 },
                 "mode": {
-                    "description": "An fheidhm at\u00e1 le sannadh don LED. F\u00e9ach https://www.home-assistant.io/integrations/opentherm_gw/#led-modes le haghaidh m\u00edni\u00fa ar na luachanna.",
                     "name": "M\u00f3d"
                 }
             },

homeassistant/components/opentherm_gw/translations/hu.json

@@ -383,7 +383,6 @@
             "name": "\u00c1tj\u00e1r\u00f3 \u00fajraind\u00edt\u00e1sa"
         },
         "send_transparent_command": {
-            "description": "Egyedi otgw parancsok k\u00fcld\u00e9se (https://otgw.tclcode.com/firmware.html) \u00e1tl\u00e1tsz\u00f3 fel\u00fcleten kereszt\u00fcl.",
             "fields": {
                 "gateway_id": {
                     "description": "Az OpenTherm Gateway azonos\u00edt\u00f3ja.",
@@ -458,7 +457,6 @@
                     "name": "Azonos\u00edt\u00f3"
                 },
                 "mode": {
-                    "description": "A GPIO t\u0171re be\u00e1ll\u00edtand\u00f3 m\u00f3d. Mindk\u00e9t GPIO eset\u00e9ben elfogadottak a 0-t\u00f3l 6-ig terjed\u0151 \u00e9rt\u00e9kek, a 7-es \u00e9rt\u00e9k csak a GPIO \"B\" eset\u00e9ben fogadhat\u00f3 el. Az \u00e9rt\u00e9kek magyar\u00e1zat\u00e1t itt tal\u00e1lja: https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
                     "name": "M\u00f3d"
                 }
             },
@@ -504,7 +502,6 @@
                     "name": "Azonos\u00edt\u00f3"
                 },
                 "mode": {
-                    "description": "A LED-hez rendelend\u0151 funkci\u00f3. Az \u00e9rt\u00e9kek magyar\u00e1zat\u00e1t l\u00e1sd a https://www.home-assistant.io/integrations/opentherm_gw/#led-modes oldalon.",
                     "name": "M\u00f3d"
                 }
             },

homeassistant/components/opentherm_gw/translations/it.json

@@ -312,7 +312,6 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Modalit\u00e0 da impostare sul pin GPIO. I valori da 0 a 6 sono accettati per entrambi i GPIO, 7 \u00e8 accettato solo per GPIO \"B\". Vedere https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes per una spiegazione dei valori.",
                     "name": "Modalit\u00e0"
                 }
             },
@@ -354,7 +353,6 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "La funzione da assegnare al LED. Vedere https://www.home-assistant.io/integrations/opentherm_gw/#led-modes per una spiegazione dei valori.",
                     "name": "Modalit\u00e0"
                 }
             },

homeassistant/components/opentherm_gw/translations/ja.json

@@ -381,7 +381,6 @@
             "name": "\u30b2\u30fc\u30c8\u30a6\u30a7\u30a4\u306e\u30ea\u30bb\u30c3\u30c8"
         },
         "send_transparent_command": {
-            "description": "\u30ab\u30b9\u30bf\u30e0 otgw \u30b3\u30de\u30f3\u30c9(https://otgw.tclcode.com/firmware.html)\u3092\u30c8\u30e9\u30f3\u30b9\u30da\u30a2\u30ec\u30f3\u30c8 \u30a4\u30f3\u30bf\u30fc\u30d5\u30a7\u30a4\u30b9\u7d4c\u7531\u3067\u9001\u4fe1\u3057\u307e\u3059\u3002",
             "fields": {
                 "gateway_id": {
                     "description": "OpenTherm \u30b2\u30fc\u30c8\u30a6\u30a7\u30a4\u306e ID\u3002",
@@ -454,7 +453,6 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "GPIO \u30d4\u30f3\u306b\u8a2d\u5b9a\u3059\u308b\u30e2\u30fc\u30c9\u3002\u50240\u304b\u30896\u306f\u4e21\u65b9\u306eGPIO\u3067\u4f7f\u7528\u3067\u304d\u30017\u306fGPIO \"B \"\u3067\u306e\u307f\u4f7f\u7528\u3067\u304d\u307e\u3059\u3002\u5024\u306e\u8aac\u660e\u306b\u3064\u3044\u3066\u306f https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes \u3092\u53c2\u7167\u3057\u3066\u304f\u3060\u3055\u3044\u3002",
                     "name": "\u30e2\u30fc\u30c9"
                 }
             },
@@ -499,7 +497,6 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "LED\u306b\u5272\u308a\u5f53\u3066\u308b\u95a2\u6570\u3002\u5024\u306e\u8aac\u660e\u306f \nhttps://www.home-assistant.io/integrations/opentherm_gw/#led-modes\n \u3092\u53c2\u7167\u3002",
                     "name": "\u30e2\u30fc\u30c9"
                 }
             },

homeassistant/components/opentherm_gw/translations/lt.json

@@ -386,7 +386,7 @@
             "name": "I\u0161 naujo nustatyti prieigos vartus"
         },
         "send_transparent_command": {
-            "description": "Siun\u010dia pasirinktines otgw komandas (https://otgw.tclcode.com/firmware.html) per skaidri\u0105 s\u0105saj\u0105.",
+            "description": "Siun\u010dia pasirinktines OTGW komandas ({opentherm_gateway_firmware_url}) per skaidri\u0105 s\u0105saj\u0105.",
             "fields": {
                 "gateway_id": {
                     "description": "OpenTherm Gateway ID.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Re\u017eimas, skirtas nustatyti GPIO kai\u0161tyje. Vert\u0117s nuo 0 iki 6 priimamos abiem GPIO, o 7 \u2013 tik GPIO \u201eB\u201c. Jei norite paai\u0161kinti vertes, \u017er. https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
+                    "description": "Re\u017eimas, kur\u012f reikia nustatyti GPIO kai\u0161tyje. Abiem GPIO priimamos vert\u0117s nuo 0 iki 6, 7 \u2013 tik GPIO \"B\". \u017dr. {gpio_modes_documentation_url} d\u0117l vertybi\u0173 paai\u0161kinimo.",
                     "name": "Re\u017eimas"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Funkcija, kuri\u0105 reikia priskirti \u0161viesos diodui. Jei norite paai\u0161kinti vertes, \u017er. https://www.home-assistant.io/integrations/opentherm_gw/#led-modes.",
+                    "description": "Funkcija, kuri\u0105 reikia priskirti \u0161viesos diodui. \u017dr. {led_modes_documentation_url} d\u0117l vertybi\u0173 paai\u0161kinimo.",
                     "name": "Re\u017eimas"
                 }
             },

homeassistant/components/opentherm_gw/translations/nl.json

@@ -299,7 +299,6 @@
             "name": "Gateway opnieuw instellen"
         },
         "send_transparent_command": {
-            "description": "Verstuurt aangepaste otgw-commando's (https://otgw.tclcode.com/firmware.html) via een transparante interface.",
             "fields": {
                 "gateway_id": {
                     "description": "Het ID van de OpenTherm Gateway.",
@@ -366,7 +365,6 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Modus om in te stellen op de GPIO-pin. Waarden 0 tot en met 6 worden geaccepteerd voor beide GPIO's, 7 wordt alleen geaccepteerd voor GPIO \"B\". Zie [OpenTherm GPIO modus](https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes) voor een uitleg van de waarden.",
                     "name": "Modus"
                 }
             },

homeassistant/components/opentherm_gw/translations/pt.json

@@ -386,7 +386,7 @@
             "name": "Reiniciar o gateway"
         },
         "send_transparent_command": {
-            "description": "Envia comandos otgw personalizados (https://otgw.tclcode.com/firmware.html) atrav\u00e9s de uma interface transparente.",
+            "description": "Envia comandos OTGW personalizados ({opentherm_gateway_firmware_url}) atrav\u00e9s de uma interface transparente.",
             "fields": {
                 "gateway_id": {
                     "description": "O ID do Gateway OpenTherm.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Modo a definir no pino GPIO. Os valores de 0 a 6 s\u00e3o aceites para ambos os GPIOs, 7 s\u00f3 \u00e9 aceite para o GPIO \"B\". Ver https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes para uma explica\u00e7\u00e3o dos valores.",
+                    "description": "Modo a definir no pino GPIO. Os valores de 0 a 6 s\u00e3o aceites para ambos os GPIO, 7 s\u00f3 \u00e9 aceite para o GPIO \"B\". Ver {gpio_modes_documentation_url} para uma explica\u00e7\u00e3o dos valores.",
                     "name": "Modo"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "A fun\u00e7\u00e3o a atribuir ao LED. Ver https://www.home-assistant.io/integrations/opentherm_gw/#led-modes para uma explica\u00e7\u00e3o dos valores.",
+                    "description": "A fun\u00e7\u00e3o a atribuir ao LED. Ver {led_modes_documentation_url} para uma explica\u00e7\u00e3o dos valores.",
                     "name": "Modo"
                 }
             },

homeassistant/components/opentherm_gw/translations/ru.json

@@ -383,7 +383,7 @@
             "name": "\u0421\u0431\u0440\u043e\u0441 \u0448\u043b\u044e\u0437\u0430"
         },
         "send_transparent_command": {
-            "description": "\u041e\u0442\u043f\u0440\u0430\u0432\u043b\u044f\u0435\u0442 \u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u0435\u043b\u044c\u0441\u043a\u0438\u0435 \u043a\u043e\u043c\u0430\u043d\u0434\u044b otgw (https://otgw.tclcode.com/firmware.html) \u0447\u0435\u0440\u0435\u0437 \u043f\u0440\u043e\u0437\u0440\u0430\u0447\u043d\u044b\u0439 \u0438\u043d\u0442\u0435\u0440\u0444\u0435\u0439\u0441.",
+            "description": "\u041e\u0442\u043f\u0440\u0430\u0432\u043b\u044f\u0435\u0442 \u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u0442\u0435\u043b\u044c\u0441\u043a\u0438\u0435 \u043a\u043e\u043c\u0430\u043d\u0434\u044b OTGW ({opentherm_gateway_firmware_url}) \u0447\u0435\u0440\u0435\u0437 \u043f\u0440\u043e\u0437\u0440\u0430\u0447\u043d\u044b\u0439 \u0438\u043d\u0442\u0435\u0440\u0444\u0435\u0439\u0441.",
             "fields": {
                 "gateway_id": {
                     "description": "\u0418\u0434\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0442\u043e\u0440 \u0448\u043b\u044e\u0437\u0430 OpenTherm.",
@@ -458,7 +458,7 @@
                     "name": "\u0418\u0434\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0442\u043e\u0440"
                 },
                 "mode": {
-                    "description": "\u0420\u0435\u0436\u0438\u043c \u0434\u043b\u044f \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u043d\u0430 \u0432\u044b\u0432\u043e\u0434\u0435 GPIO. \u0417\u043d\u0430\u0447\u0435\u043d\u0438\u044f \u043e\u0442 0 \u0434\u043e 6 \u043f\u0440\u0438\u043d\u0438\u043c\u0430\u044e\u0442\u0441\u044f \u0434\u043b\u044f \u043e\u0431\u043e\u0438\u0445 GPIO, 7 \u043f\u0440\u0438\u043d\u0438\u043c\u0430\u0435\u0442\u0441\u044f \u0442\u043e\u043b\u044c\u043a\u043e \u0434\u043b\u044f GPIO \"B\". \u041e\u0431\u044a\u044f\u0441\u043d\u0435\u043d\u0438\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0439 \u0441\u043c. \u043d\u0430 \u0441\u0430\u0439\u0442\u0435 https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
+                    "description": "\u0420\u0435\u0436\u0438\u043c \u0434\u043b\u044f \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u043d\u0430 \u0432\u044b\u0432\u043e\u0434\u0435 GPIO. \u0417\u043d\u0430\u0447\u0435\u043d\u0438\u044f \u043e\u0442 0 \u0434\u043e 6 \u043f\u0440\u0438\u043d\u0438\u043c\u0430\u044e\u0442\u0441\u044f \u0434\u043b\u044f \u043e\u0431\u043e\u0438\u0445 GPIO, 7 \u043f\u0440\u0438\u043d\u0438\u043c\u0430\u0435\u0442\u0441\u044f \u0442\u043e\u043b\u044c\u043a\u043e \u0434\u043b\u044f GPIO \"B\". \u041e\u0431\u044a\u044f\u0441\u043d\u0435\u043d\u0438\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0439 \u0441\u043c. \u043d\u0430 \u0441\u0430\u0439\u0442\u0435 {gpio_modes_documentation_url}.",
                     "name": "\u0420\u0435\u0436\u0438\u043c"
                 }
             },
@@ -504,7 +504,7 @@
                     "name": "\u0418\u0434\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0442\u043e\u0440"
                 },
                 "mode": {
-                    "description": "\u0424\u0443\u043d\u043a\u0446\u0438\u044f, \u043a\u043e\u0442\u043e\u0440\u0443\u044e \u0441\u043b\u0435\u0434\u0443\u0435\u0442 \u043d\u0430\u0437\u043d\u0430\u0447\u0438\u0442\u044c \u0441\u0432\u0435\u0442\u043e\u0434\u0438\u043e\u0434\u0443. \u041e\u0431\u044a\u044f\u0441\u043d\u0435\u043d\u0438\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0439 \u0441\u043c. \u043d\u0430 \u0441\u0430\u0439\u0442\u0435 https://www.home-assistant.io/integrations/opentherm_gw/#led-modes.",
+                    "description": "\u0424\u0443\u043d\u043a\u0446\u0438\u044f, \u043a\u043e\u0442\u043e\u0440\u0443\u044e \u0441\u043b\u0435\u0434\u0443\u0435\u0442 \u043d\u0430\u0437\u043d\u0430\u0447\u0438\u0442\u044c \u0441\u0432\u0435\u0442\u043e\u0434\u0438\u043e\u0434\u0443. \u041e\u0431\u044a\u044f\u0441\u043d\u0435\u043d\u0438\u0435 \u0437\u043d\u0430\u0447\u0435\u043d\u0438\u0439 \u0441\u043c. \u043d\u0430 \u0441\u0430\u0439\u0442\u0435 {led_modes_documentation_url}.",
                     "name": "\u0420\u0435\u0436\u0438\u043c"
                 }
             },

homeassistant/components/opentherm_gw/translations/sk.json

@@ -386,7 +386,7 @@
             "name": "Resetova\u0165 gateway"
         },
         "send_transparent_command": {
-            "description": "Odosiela vlastn\u00e9 pr\u00edkazy otgw (https://otgw.tclcode.com/firmware.html) prostredn\u00edctvom transparentn\u00e9ho rozhrania.",
+            "description": "Odosiela vlastn\u00e9 OTGW pr\u00edkazy ({opentherm_gateway_firmware_url}) prostredn\u00edctvom transparentn\u00e9ho rozhrania.",
             "fields": {
                 "gateway_id": {
                     "description": "ID br\u00e1ny OpenTherm.",
@@ -461,7 +461,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Re\u017eim, ktor\u00fd sa m\u00e1 nastavi\u0165 na pine GPIO. Hodnoty 0 a\u017e 6 s\u00fa akceptovan\u00e9 pre oba GPIO, 7 je akceptovan\u00e1 len pre GPIO \"B\". Vysvetlenie hodn\u00f4t n\u00e1jdete na str\u00e1nke https://www.home-assistant.io/integrations/opentherm_gw/#gpio-modes.",
+                    "description": "Re\u017eim, ktor\u00fd sa m\u00e1 nastavi\u0165 na pine GPIO. Hodnoty 0 a\u017e 6 s\u00fa akceptovan\u00e9 pre oba GPIO, 7 je akceptovan\u00e1 len pre GPIO \"B\". Vysvetlenie hodn\u00f4t n\u00e1jdete na str\u00e1nke {gpio_modes_documentation_url} .",
                     "name": "Re\u017eim"
                 }
             },
@@ -507,7 +507,7 @@
                     "name": "ID"
                 },
                 "mode": {
-                    "description": "Funkcia, ktor\u00e1 sa m\u00e1 priradi\u0165 LED di\u00f3de. Vysvetlenie hodn\u00f4t n\u00e1jdete na str\u00e1nke https://www.home-assistant.io/integrations/opentherm_gw/#led-modes.",
+                    "description": "Funkcia, ktor\u00e1 sa m\u00e1 priradi\u0165 LED di\u00f3de. Vysvetlenie hodn\u00f4t n\u00e1jdete na str\u00e1nke {led_modes_documentation_url} .",
                     "name": "Re\u017eim"
                 }
             },