fake-bpy-module-latest 20260113__py3-none-any.whl → 20260114__py3-none-any.whl

bpy/ops/mesh/__init__.pyi

@@ -21,22 +21,13 @@ def attribute_set(
 ) -> None:
     """Set values of the active attribute for selected elements
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param value_float: Value
-    :type value_float: float | None
     :param value_float_vector_2d: Value
-    :type value_float_vector_2d: collections.abc.Iterable[float] | None
     :param value_float_vector_3d: Value
-    :type value_float_vector_3d: collections.abc.Iterable[float] | None
     :param value_int: Value
-    :type value_int: int | None
     :param value_int_vector_2d: Value
-    :type value_int_vector_2d: collections.abc.Iterable[int] | None
     :param value_color: Value
-    :type value_color: collections.abc.Iterable[float] | None
     :param value_bool: Value
-    :type value_bool: bool | None
     """
 
 def average_normals(
@@ -51,8 +42,6 @@ def average_normals(
 ) -> None:
     """Average custom normals of selected vertices
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param average_type: Type, Averaging method
 
     CUSTOM_NORMAL
@@ -63,11 +52,8 @@ def average_normals(
 
     CORNER_ANGLE
     Corner Angle -- Set all vertex normals by corner angle.
-        :type average_type: typing.Literal['CUSTOM_NORMAL','FACE_AREA','CORNER_ANGLE'] | None
         :param weight: Weight, Weight applied per face
-        :type weight: int | None
         :param threshold: Threshold, Threshold value for different weights to be considered equal
-        :type threshold: float | None
     """
 
 def beautify_fill(
@@ -79,10 +65,7 @@ def beautify_fill(
 ) -> None:
     """Rearrange some faces to try to get less degenerated geometry
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param angle_limit: Max Angle, Angle limit
-    :type angle_limit: float | None
     """
 
 def bevel(
@@ -114,8 +97,6 @@ def bevel(
 ) -> None:
     """Cut into selected items at an angle to create bevel or chamfer
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param offset_type: Width Type, The method for determining the size of the bevel
 
     OFFSET
@@ -132,9 +113,7 @@ def bevel(
 
     ABSOLUTE
     Absolute -- Amount is absolute distance along adjacent edge.
-        :type offset_type: typing.Literal['OFFSET','WIDTH','DEPTH','PERCENT','ABSOLUTE'] | None
         :param offset: Width, Bevel amount
-        :type offset: float | None
         :param profile_type: Profile Type, The type of shape used to rebuild a beveled section
 
     SUPERELLIPSE
@@ -142,13 +121,9 @@ def bevel(
 
     CUSTOM
     Custom -- The profile can be any arbitrary path between its endpoints.
-        :type profile_type: typing.Literal['SUPERELLIPSE','CUSTOM'] | None
         :param offset_pct: Width Percent, Bevel amount for percentage method
-        :type offset_pct: float | None
         :param segments: Segments, Segments for curved edge
-        :type segments: int | None
         :param profile: Profile, Controls profile shape (0.5 = round)
-        :type profile: float | None
         :param affect: Affect, Affect edges or vertices
 
     VERTICES
@@ -156,19 +131,12 @@ def bevel(
 
     EDGES
     Edges -- Affect only edges.
-        :type affect: typing.Literal['VERTICES','EDGES'] | None
         :param clamp_overlap: Clamp Overlap, Do not allow beveled edges/vertices to overlap each other
-        :type clamp_overlap: bool | None
         :param loop_slide: Loop Slide, Prefer sliding along edges to even widths
-        :type loop_slide: bool | None
         :param mark_seam: Mark Seams, Preserve seams along beveled edges
-        :type mark_seam: bool | None
         :param mark_sharp: Mark Sharp, Preserve sharp edges along beveled edges
-        :type mark_sharp: bool | None
         :param material: Material Index, Material for bevel faces (-1 means use adjacent faces)
-        :type material: int | None
         :param harden_normals: Harden Normals, Match normals of new faces to adjacent faces
-        :type harden_normals: bool | None
         :param face_strength_mode: Face Strength Mode, Whether to set face strength, and which faces to set face strength on
 
     NONE
@@ -182,7 +150,6 @@ def bevel(
 
     ALL
     All -- Set face strength on all faces.
-        :type face_strength_mode: typing.Literal['NONE','NEW','AFFECTED','ALL'] | None
         :param miter_outer: Outer Miter, Pattern to use for outside of miters
 
     SHARP
@@ -193,7 +160,6 @@ def bevel(
 
     ARC
     Arc -- Outside of miter is arc.
-        :type miter_outer: typing.Literal['SHARP','PATCH','ARC'] | None
         :param miter_inner: Inner Miter, Pattern to use for inside of miters
 
     SHARP
@@ -201,9 +167,7 @@ def bevel(
 
     ARC
     Arc -- Inside of miter is arc.
-        :type miter_inner: typing.Literal['SHARP','ARC'] | None
         :param spread: Spread, Amount to spread arcs for arc inner miters
-        :type spread: float | None
         :param vmesh_method: Vertex Mesh Method, The method to use to create meshes at intersections
 
     ADJ
@@ -211,9 +175,7 @@ def bevel(
 
     CUTOFF
     Cutoff -- A cutoff at each profiles end before the intersection.
-        :type vmesh_method: typing.Literal['ADJ','CUTOFF'] | None
         :param release_confirm: Confirm on Release
-        :type release_confirm: bool | None
     """
 
 def bisect(
@@ -244,32 +206,18 @@ def bisect(
 ) -> None:
     """Cut geometry along a plane (click-drag to define plane)
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param plane_co: Plane Point, A point on the plane
-    :type plane_co: collections.abc.Sequence[float] | mathutils.Vector | None
     :param plane_no: Plane Normal, The direction the plane points
-    :type plane_no: collections.abc.Sequence[float] | mathutils.Vector | None
     :param use_fill: Fill, Fill in the cut
-    :type use_fill: bool | None
     :param clear_inner: Clear Inner, Remove geometry behind the plane
-    :type clear_inner: bool | None
     :param clear_outer: Clear Outer, Remove geometry in front of the plane
-    :type clear_outer: bool | None
     :param threshold: Axis Threshold, Preserves the existing geometry along the cut plane
-    :type threshold: float | None
     :param xstart: X Start
-    :type xstart: int | None
     :param xend: X End
-    :type xend: int | None
     :param ystart: Y Start
-    :type ystart: int | None
     :param yend: Y End
-    :type yend: int | None
     :param flip: Flip
-    :type flip: bool | None
     :param cursor: Cursor, Mouse cursor style to use during the modal operator
-    :type cursor: int | None
     """
 
 def blend_from_shape(
@@ -283,14 +231,9 @@ def blend_from_shape(
 ) -> None:
     """Blend in shape from a shape key
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param shape: Shape, Shape key to use for blending
-    :type shape: str | None
     :param blend: Blend, Blending factor
-    :type blend: float | None
     :param add: Add, Add rather than blend between shapes
-    :type add: bool | None
     """
 
 def bridge_edge_loops(
@@ -311,26 +254,15 @@ def bridge_edge_loops(
 ) -> None:
     """Create a bridge of faces between two or more selected edge loops
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param type: Connect Loops, Method of bridging multiple loops
-    :type type: typing.Literal['SINGLE','CLOSED','PAIRS'] | None
     :param use_merge: Merge, Merge rather than creating faces
-    :type use_merge: bool | None
     :param merge_factor: Merge Factor
-    :type merge_factor: float | None
     :param twist_offset: Twist, Twist offset for closed loops
-    :type twist_offset: int | None
     :param number_cuts: Number of Cuts
-    :type number_cuts: int | None
     :param interpolation: Interpolation, Interpolation method
-    :type interpolation: typing.Literal['LINEAR','PATH','SURFACE'] | None
     :param smoothness: Smoothness, Smoothness factor
-    :type smoothness: float | None
     :param profile_shape_factor: Profile Factor, How much intermediary new edges are shrunk/expanded
-    :type profile_shape_factor: float | None
     :param profile_shape: Profile Shape, Shape of the profile
-    :type profile_shape: bpy.stub_internal.rna_enums.ProportionalFalloffCurveOnlyItems | None
     """
 
 def colors_reverse(
@@ -338,11 +270,7 @@ def colors_reverse(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Flip direction of face corner color attribute inside faces
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Flip direction of face corner color attribute inside faces"""
 
 def colors_rotate(
     execution_context: int | str | None = None,
@@ -353,10 +281,7 @@ def colors_rotate(
 ) -> None:
     """Rotate face corner color attribute inside faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_ccw: Counter Clockwise
-    :type use_ccw: bool | None
     """
 
 def convex_hull(
@@ -380,34 +305,19 @@ def convex_hull(
 ) -> None:
     """Enclose selected vertices in a convex polyhedron
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param delete_unused: Delete Unused, Delete selected elements that are not used by the hull
-    :type delete_unused: bool | None
     :param use_existing_faces: Use Existing Faces, Skip hull triangles that are covered by a pre-existing face
-    :type use_existing_faces: bool | None
     :param make_holes: Make Holes, Delete selected faces that are used by the hull
-    :type make_holes: bool | None
     :param join_triangles: Join Triangles, Merge adjacent triangles into quads
-    :type join_triangles: bool | None
     :param face_threshold: Max Face Angle, Face angle limit
-    :type face_threshold: float | None
     :param shape_threshold: Max Shape Angle, Shape angle limit
-    :type shape_threshold: float | None
     :param topology_influence: Topology Influence, How much to prioritize regular grids of quads as well as quads that touch existing quads
-    :type topology_influence: float | None
     :param uvs: Compare UVs
-    :type uvs: bool | None
     :param vcols: Compare Color Attributes
-    :type vcols: bool | None
     :param seam: Compare Seam
-    :type seam: bool | None
     :param sharp: Compare Sharp
-    :type sharp: bool | None
     :param materials: Compare Materials
-    :type materials: bool | None
     :param deselect_joined: Deselect Joined, Only select remaining triangles that were not merged
-    :type deselect_joined: bool | None
     """
 
 def customdata_custom_splitnormals_add(
@@ -415,55 +325,35 @@ def customdata_custom_splitnormals_add(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Add a custom normals layer, if none exists yet
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Add a custom normals layer, if none exists yet"""
 
 def customdata_custom_splitnormals_clear(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Remove the custom normals layer, if it exists
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Remove the custom normals layer, if it exists"""
 
 def customdata_mask_clear(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Clear vertex sculpt masking data from the mesh
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Clear vertex sculpt masking data from the mesh"""
 
 def customdata_skin_add(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Add a vertex skin layer
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Add a vertex skin layer"""
 
 def customdata_skin_clear(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Clear vertex skin layer
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Clear vertex skin layer"""
 
 def decimate(
     execution_context: int | str | None = None,
@@ -479,20 +369,12 @@ def decimate(
 ) -> None:
     """Simplify geometry by collapsing edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param ratio: Ratio
-    :type ratio: float | None
     :param use_vertex_group: Vertex Group, Use active vertex group as an influence
-    :type use_vertex_group: bool | None
     :param vertex_group_factor: Weight, Vertex group strength
-    :type vertex_group_factor: float | None
     :param invert_vertex_group: Invert, Invert vertex group influence
-    :type invert_vertex_group: bool | None
     :param use_symmetry: Symmetry, Maintain symmetry on an axis
-    :type use_symmetry: bool | None
     :param symmetry_axis: Axis, Axis of symmetry
-    :type symmetry_axis: bpy.stub_internal.rna_enums.AxisXyzItems | None
     """
 
 def delete(
@@ -505,10 +387,7 @@ def delete(
 ) -> None:
     """Delete selected vertices, edges or faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param type: Type, Method used for deleting mesh data
-    :type type: typing.Literal['VERT','EDGE','FACE','EDGE_FACE','ONLY_FACE'] | None
     """
 
 def delete_edgeloop(
@@ -520,10 +399,7 @@ def delete_edgeloop(
 ) -> None:
     """Delete an edge loop by merging the faces on each side
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_face_split: Face Split, Split off face corners to maintain surrounding geometry
-    :type use_face_split: bool | None
     """
 
 def delete_loose(
@@ -537,14 +413,9 @@ def delete_loose(
 ) -> None:
     """Delete loose vertices, edges or faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_verts: Vertices, Remove loose vertices
-    :type use_verts: bool | None
     :param use_edges: Edges, Remove loose edges
-    :type use_edges: bool | None
     :param use_faces: Faces, Remove loose faces
-    :type use_faces: bool | None
     """
 
 def dissolve_degenerate(
@@ -556,10 +427,7 @@ def dissolve_degenerate(
 ) -> None:
     """Dissolve zero area faces and zero length edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param threshold: Merge Distance, Maximum distance between elements to merge
-    :type threshold: float | None
     """
 
 def dissolve_edges(
@@ -573,14 +441,9 @@ def dissolve_edges(
 ) -> None:
     """Dissolve edges, merging faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_verts: Dissolve Vertices, Dissolve remaining vertices which connect to only two edges
-    :type use_verts: bool | None
     :param angle_threshold: Angle Threshold, Remaining vertices which separate edge pairs are preserved if their edge angle exceeds this threshold.
-    :type angle_threshold: float | None
     :param use_face_split: Face Split, Split off face corners to maintain surrounding geometry
-    :type use_face_split: bool | None
     """
 
 def dissolve_faces(
@@ -592,10 +455,7 @@ def dissolve_faces(
 ) -> None:
     """Dissolve faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_verts: Dissolve Vertices, Dissolve remaining vertices which connect to only two edges
-    :type use_verts: bool | None
     """
 
 def dissolve_limited(
@@ -609,14 +469,9 @@ def dissolve_limited(
 ) -> None:
     """Dissolve selected edges and vertices, limited by the angle of surrounding geometry
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param angle_limit: Max Angle, Angle limit
-    :type angle_limit: float | None
     :param use_dissolve_boundaries: All Boundaries, Dissolve all vertices in between face boundaries
-    :type use_dissolve_boundaries: bool | None
     :param delimit: Delimit, Delimit dissolve operation
-    :type delimit: set[bpy.stub_internal.rna_enums.MeshDelimitModeItems] | None
     """
 
 def dissolve_mode(
@@ -631,16 +486,10 @@ def dissolve_mode(
 ) -> None:
     """Dissolve geometry based on the selection mode
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_verts: Dissolve Vertices, Dissolve remaining vertices which connect to only two edges
-    :type use_verts: bool | None
     :param angle_threshold: Angle Threshold, Remaining vertices which separate edge pairs are preserved if their edge angle exceeds this threshold.
-    :type angle_threshold: float | None
     :param use_face_split: Face Split, Split off face corners to maintain surrounding geometry
-    :type use_face_split: bool | None
     :param use_boundary_tear: Tear Boundary, Split off face corners instead of merging faces
-    :type use_boundary_tear: bool | None
     """
 
 def dissolve_verts(
@@ -653,12 +502,8 @@ def dissolve_verts(
 ) -> None:
     """Dissolve vertices, merge edges and faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_face_split: Face Split, Split off face corners to maintain surrounding geometry
-    :type use_face_split: bool | None
     :param use_boundary_tear: Tear Boundary, Split off face corners instead of merging faces
-    :type use_boundary_tear: bool | None
     """
 
 def dupli_extrude_cursor(
@@ -670,10 +515,7 @@ def dupli_extrude_cursor(
 ) -> None:
     """Duplicate and extrude selected vertices, edges or faces towards the mouse cursor
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param rotate_source: Rotate Source, Rotate initial selection giving better shape
-    :type rotate_source: bool | None
     """
 
 def duplicate(
@@ -685,10 +527,7 @@ def duplicate(
 ) -> None:
     """Duplicate selected vertices, edges or faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mode: Mode
-    :type mode: int | None
     """
 
 def duplicate_move(
@@ -701,12 +540,8 @@ def duplicate_move(
 ) -> None:
     """Duplicate mesh and move
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_duplicate: Duplicate, Duplicate selected vertices, edges or faces
-    :type MESH_OT_duplicate: duplicate | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def edge_collapse(
@@ -714,22 +549,14 @@ def edge_collapse(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Collapse isolated edge and face regions, merging data such as UVs and color attributes. This can collapse edge-rings as well as regions of connected faces into vertices
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Collapse isolated edge and face regions, merging data such as UVs and color attributes. This can collapse edge-rings as well as regions of connected faces into vertices"""
 
 def edge_face_add(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Add an edge or face to selected
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Add an edge or face to selected"""
 
 def edge_rotate(
     execution_context: int | str | None = None,
@@ -740,10 +567,7 @@ def edge_rotate(
 ) -> None:
     """Rotate selected edge or adjoining faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_ccw: Counter Clockwise
-    :type use_ccw: bool | None
     """
 
 def edge_split(
@@ -755,8 +579,6 @@ def edge_split(
 ) -> None:
     """Split selected edges so that each neighbor face gets its own copy
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param type: Type, Method to use for splitting
 
     EDGE
@@ -764,7 +586,6 @@ def edge_split(
 
     VERT
     Faces & Edges by Vertices -- Split faces and edges connected to selected vertices.
-        :type type: typing.Literal['EDGE','VERT'] | None
     """
 
 def edgering_select(
@@ -779,16 +600,10 @@ def edgering_select(
 ) -> None:
     """Select an edge ring
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     :param deselect: Deselect, Remove from the selection
-    :type deselect: bool | None
     :param toggle: Toggle Select, Toggle the selection
-    :type toggle: bool | None
     :param ring: Select Ring, Select ring
-    :type ring: bool | None
     """
 
 def edges_select_sharp(
@@ -800,10 +615,7 @@ def edges_select_sharp(
 ) -> None:
     """Select all sharp enough edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param sharpness: Sharpness
-    :type sharpness: float | None
     """
 
 def extrude_context(
@@ -817,14 +629,9 @@ def extrude_context(
 ) -> None:
     """Extrude selection
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_normal_flip: Flip Normals
-    :type use_normal_flip: bool | None
     :param use_dissolve_ortho_edges: Dissolve Orthogonal Edges
-    :type use_dissolve_ortho_edges: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     """
 
 def extrude_context_move(
@@ -837,12 +644,8 @@ def extrude_context_move(
 ) -> None:
     """Extrude region together along the average normal
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_context: Extrude Context, Extrude selection
-    :type MESH_OT_extrude_context: extrude_context | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def extrude_edges_indiv(
@@ -855,12 +658,8 @@ def extrude_edges_indiv(
 ) -> None:
     """Extrude individual edges only
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_normal_flip: Flip Normals
-    :type use_normal_flip: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     """
 
 def extrude_edges_move(
@@ -873,12 +672,8 @@ def extrude_edges_move(
 ) -> None:
     """Extrude edges and move result
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_edges_indiv: Extrude Only Edges, Extrude individual edges only
-    :type MESH_OT_extrude_edges_indiv: extrude_edges_indiv | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def extrude_faces_indiv(
@@ -890,10 +685,7 @@ def extrude_faces_indiv(
 ) -> None:
     """Extrude individual faces only
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     """
 
 def extrude_faces_move(
@@ -906,12 +698,8 @@ def extrude_faces_move(
 ) -> None:
     """Extrude each individual face separately along local normals
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_faces_indiv: Extrude Individual Faces, Extrude individual faces only
-    :type MESH_OT_extrude_faces_indiv: extrude_faces_indiv | None
     :param TRANSFORM_OT_shrink_fatten: Shrink/Fatten, Shrink/fatten selected vertices along normals
-    :type TRANSFORM_OT_shrink_fatten: bpy.ops.transform.shrink_fatten | None
     """
 
 def extrude_manifold(
@@ -924,12 +712,8 @@ def extrude_manifold(
 ) -> None:
     """Extrude, dissolves edges whose faces form a flat surface and intersect new edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_region: Extrude Region, Extrude region of faces
-    :type MESH_OT_extrude_region: extrude_region | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def extrude_region(
@@ -943,14 +727,9 @@ def extrude_region(
 ) -> None:
     """Extrude region of faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_normal_flip: Flip Normals
-    :type use_normal_flip: bool | None
     :param use_dissolve_ortho_edges: Dissolve Orthogonal Edges
-    :type use_dissolve_ortho_edges: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     """
 
 def extrude_region_move(
@@ -963,12 +742,8 @@ def extrude_region_move(
 ) -> None:
     """Extrude region and move result
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_region: Extrude Region, Extrude region of faces
-    :type MESH_OT_extrude_region: extrude_region | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def extrude_region_shrink_fatten(
@@ -981,12 +756,8 @@ def extrude_region_shrink_fatten(
 ) -> None:
     """Extrude region together along local normals
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_region: Extrude Region, Extrude region of faces
-    :type MESH_OT_extrude_region: extrude_region | None
     :param TRANSFORM_OT_shrink_fatten: Shrink/Fatten, Shrink/fatten selected vertices along normals
-    :type TRANSFORM_OT_shrink_fatten: bpy.ops.transform.shrink_fatten | None
     """
 
 def extrude_repeat(
@@ -1000,14 +771,9 @@ def extrude_repeat(
 ) -> None:
     """Extrude selected vertices, edges or faces repeatedly
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param steps: Steps
-    :type steps: int | None
     :param offset: Offset, Offset vector
-    :type offset: collections.abc.Sequence[float] | mathutils.Vector | None
     :param scale_offset: Scale Offset
-    :type scale_offset: float | None
     """
 
 def extrude_vertices_move(
@@ -1020,12 +786,8 @@ def extrude_vertices_move(
 ) -> None:
     """Extrude vertices and move result
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_extrude_verts_indiv: Extrude Only Vertices, Extrude individual vertices only
-    :type MESH_OT_extrude_verts_indiv: extrude_verts_indiv | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def extrude_verts_indiv(
@@ -1037,10 +799,7 @@ def extrude_verts_indiv(
 ) -> None:
     """Extrude individual vertices only
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     """
 
 def face_make_planar(
@@ -1053,12 +812,8 @@ def face_make_planar(
 ) -> None:
     """Flatten selected faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param factor: Factor
-    :type factor: float | None
     :param repeat: Iterations
-    :type repeat: int | None
     """
 
 def face_split_by_edges(
@@ -1066,11 +821,7 @@ def face_split_by_edges(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Weld loose edges into faces (splitting them into new faces)
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Weld loose edges into faces (splitting them into new faces)"""
 
 def faces_select_linked_flat(
     execution_context: int | str | None = None,
@@ -1081,10 +832,7 @@ def faces_select_linked_flat(
 ) -> None:
     """Select linked faces by angle
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param sharpness: Sharpness
-    :type sharpness: float | None
     """
 
 def faces_shade_flat(
@@ -1092,22 +840,14 @@ def faces_shade_flat(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Display faces flat
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Display faces flat"""
 
 def faces_shade_smooth(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Display faces smooth (using vertex normals)
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Display faces smooth (using vertex normals)"""
 
 def fill(
     execution_context: int | str | None = None,
@@ -1118,10 +858,7 @@ def fill(
 ) -> None:
     """Fill a selected edge loop with faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_beauty: Beauty, Use best triangulation division
-    :type use_beauty: bool | None
     """
 
 def fill_grid(
@@ -1135,14 +872,9 @@ def fill_grid(
 ) -> None:
     """Fill grid from two loops
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param span: Span, Number of grid columns
-    :type span: int | None
     :param offset: Offset, Vertex that is the corner of the grid
-    :type offset: int | None
     :param use_interp_simple: Simple Blending, Use simple interpolation of grid vertices
-    :type use_interp_simple: bool | None
     """
 
 def fill_holes(
@@ -1154,10 +886,7 @@ def fill_holes(
 ) -> None:
     """Fill in holes (boundary edge loops)
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param sides: Sides, Number of sides in hole required to fill (zero fills all holes)
-    :type sides: int | None
     """
 
 def flip_normals(
@@ -1169,10 +898,7 @@ def flip_normals(
 ) -> None:
     """Flip the direction of selected faces normals (and of their vertices)
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param only_clnors: Custom Normals Only, Only flip the custom loop normals of the selected elements
-    :type only_clnors: bool | None
     """
 
 def flip_quad_tessellation(
@@ -1180,11 +906,7 @@ def flip_quad_tessellation(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Flips the tessellation of selected quads
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Flips the tessellation of selected quads"""
 
 def hide(
     execution_context: int | str | None = None,
@@ -1195,10 +917,7 @@ def hide(
 ) -> None:
     """Hide (un)selected vertices, edges or faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param unselected: Unselected, Hide unselected rather than selected
-    :type unselected: bool | None
     """
 
 def inset(
@@ -1220,30 +939,17 @@ def inset(
 ) -> None:
     """Inset new faces into selected faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_boundary: Boundary, Inset face boundaries
-    :type use_boundary: bool | None
     :param use_even_offset: Offset Even, Scale the offset to give more even thickness
-    :type use_even_offset: bool | None
     :param use_relative_offset: Offset Relative, Scale the offset by surrounding geometry
-    :type use_relative_offset: bool | None
     :param use_edge_rail: Edge Rail, Inset the region along existing edges
-    :type use_edge_rail: bool | None
     :param thickness: Thickness
-    :type thickness: float | None
     :param depth: Depth
-    :type depth: float | None
     :param use_outset: Outset, Outset rather than inset
-    :type use_outset: bool | None
     :param use_select_inset: Select Outer, Select the new inset faces
-    :type use_select_inset: bool | None
     :param use_individual: Individual, Individual face inset
-    :type use_individual: bool | None
     :param use_interpolate: Interpolate, Blend face data across the inset
-    :type use_interpolate: bool | None
     :param release_confirm: Confirm on Release
-    :type release_confirm: bool | None
     """
 
 def intersect(
@@ -1258,8 +964,6 @@ def intersect(
 ) -> None:
     """Cut an intersection into faces
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param mode: Source
 
     SELECT
@@ -1267,7 +971,6 @@ def intersect(
 
     SELECT_UNSELECT
     Selected/Unselected -- Intersect selected with unselected faces.
-        :type mode: typing.Literal['SELECT','SELECT_UNSELECT'] | None
         :param separate_mode: Separate Mode
 
     ALL
@@ -1278,9 +981,7 @@ def intersect(
 
     NONE
     Merge -- Merge all geometry from the intersection.
-        :type separate_mode: typing.Literal['ALL','CUT','NONE'] | None
         :param threshold: Merge Threshold
-        :type threshold: float | None
         :param solver: Solver, Which Intersect solver to use
 
     FLOAT
@@ -1288,7 +989,6 @@ def intersect(
 
     EXACT
     Exact -- Slower solver with the best results for coplanar faces.
-        :type solver: typing.Literal['FLOAT','EXACT'] | None
     """
 
 def intersect_boolean(
@@ -1304,16 +1004,10 @@ def intersect_boolean(
 ) -> None:
     """Cut solid geometry from selected to unselected
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param operation: Boolean Operation, Which boolean operation to apply
-        :type operation: typing.Literal['INTERSECT','UNION','DIFFERENCE'] | None
         :param use_swap: Swap, Use with difference intersection to swap which side is kept
-        :type use_swap: bool | None
         :param use_self: Self Intersection, Do self-union or self-intersection
-        :type use_self: bool | None
         :param threshold: Merge Threshold
-        :type threshold: float | None
         :param solver: Solver, Which Boolean solver to use
 
     FLOAT
@@ -1321,7 +1015,6 @@ def intersect_boolean(
 
     EXACT
     Exact -- Exact solver, slower, handles more cases.
-        :type solver: typing.Literal['FLOAT','EXACT'] | None
     """
 
 def knife_project(
@@ -1333,10 +1026,7 @@ def knife_project(
 ) -> None:
     """Use other objects outlines and boundaries to project knife cuts
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param cut_through: Cut Through, Cut through all faces, not just visible ones
-    :type cut_through: bool | None
     """
 
 def knife_tool(
@@ -1355,14 +1045,9 @@ def knife_tool(
 ) -> None:
     """Cut new topology
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param use_occlude_geometry: Occlude Geometry, Only cut the front most geometry
-        :type use_occlude_geometry: bool | None
         :param only_selected: Only Selected, Only cut selected geometry
-        :type only_selected: bool | None
         :param xray: X-Ray, Show cuts hidden by geometry
-        :type xray: bool | None
         :param visible_measurements: Measurements, Visible distance and angle measurements
 
     NONE
@@ -1376,7 +1061,6 @@ def knife_tool(
 
     ANGLE
     Angle -- Show just angle measurements.
-        :type visible_measurements: typing.Literal['NONE','BOTH','DISTANCE','ANGLE'] | None
         :param angle_snapping: Angle Snapping, Angle snapping mode
 
     NONE
@@ -1387,11 +1071,8 @@ def knife_tool(
 
     RELATIVE
     Relative -- Angle snapping relative to the previous cut edge.
-        :type angle_snapping: typing.Literal['NONE','SCREEN','RELATIVE'] | None
         :param angle_snapping_increment: Angle Snap Increment, The angle snap increment used when in constrained angle mode
-        :type angle_snapping_increment: float | None
         :param wait_for_input: Wait for Input
-        :type wait_for_input: bool | None
     """
 
 def loop_multi_select(
@@ -1403,10 +1084,7 @@ def loop_multi_select(
 ) -> None:
     """Select a loop of connected edges by connection type
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param ring: Ring
-    :type ring: bool | None
     """
 
 def loop_select(
@@ -1421,16 +1099,10 @@ def loop_select(
 ) -> None:
     """Select a loop of connected edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param extend: Extend Select, Extend the selection
-    :type extend: bool | None
     :param deselect: Deselect, Remove from the selection
-    :type deselect: bool | None
     :param toggle: Toggle Select, Toggle the selection
-    :type toggle: bool | None
     :param ring: Select Ring, Select ring
-    :type ring: bool | None
     """
 
 def loop_to_region(
@@ -1442,10 +1114,7 @@ def loop_to_region(
 ) -> None:
     """Select region of faces inside of a selected loop of edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param select_bigger: Select Bigger, Select bigger regions instead of smaller ones
-    :type select_bigger: bool | None
     """
 
 def loopcut(
@@ -1467,19 +1136,11 @@ def loopcut(
 ) -> None:
     """Add a new loop between existing loops
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param number_cuts: Number of Cuts
-    :type number_cuts: int | None
     :param smoothness: Smoothness, Smoothness factor
-    :type smoothness: float | None
     :param falloff: Falloff, Falloff type of the feather
-    :type falloff: bpy.stub_internal.rna_enums.ProportionalFalloffCurveOnlyItems | None
     :param object_index: Object Index
-    :type object_index: int | None
     :param edge_index: Edge Index
-    :type edge_index: int | None
-    :type mesh_select_mode_init: collections.abc.Iterable[bool] | None
     """
 
 def loopcut_slide(
@@ -1492,12 +1153,8 @@ def loopcut_slide(
 ) -> None:
     """Cut mesh loop and slide it
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_loopcut: Loop Cut, Add a new loop between existing loops
-    :type MESH_OT_loopcut: loopcut | None
     :param TRANSFORM_OT_edge_slide: Edge Slide, Slide an edge loop along a mesh
-    :type TRANSFORM_OT_edge_slide: bpy.ops.transform.edge_slide | None
     """
 
 def mark_freestyle_edge(
@@ -1509,10 +1166,7 @@ def mark_freestyle_edge(
 ) -> None:
     """(Un)mark selected edges as Freestyle feature edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param clear: Clear
-    :type clear: bool | None
     """
 
 def mark_freestyle_face(
@@ -1524,10 +1178,7 @@ def mark_freestyle_face(
 ) -> None:
     """(Un)mark selected faces for exclusion from Freestyle feature edge detection
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param clear: Clear
-    :type clear: bool | None
     """
 
 def mark_seam(
@@ -1539,10 +1190,7 @@ def mark_seam(
 ) -> None:
     """(Un)mark selected edges as a seam
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param clear: Clear
-    :type clear: bool | None
     """
 
 def mark_sharp(
@@ -1555,12 +1203,8 @@ def mark_sharp(
 ) -> None:
     """(Un)mark selected edges as sharp
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param clear: Clear
-    :type clear: bool | None
     :param use_verts: Vertices, Consider vertices instead of edges to select which edges to (un)tag as sharp
-    :type use_verts: bool | None
     """
 
 def merge(
@@ -1574,12 +1218,8 @@ def merge(
 ) -> None:
     """Merge selected vertices
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param type: Type, Merge method to use
-    :type type: typing.Literal['CENTER','CURSOR','COLLAPSE','FIRST','LAST'] | None
     :param uvs: UVs, Move UVs according to merge
-    :type uvs: bool | None
     """
 
 def merge_normals(
@@ -1587,11 +1227,7 @@ def merge_normals(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Merge custom normals of selected vertices
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Merge custom normals of selected vertices"""
 
 def mod_weighted_strength(
     execution_context: int | str | None = None,
@@ -1603,12 +1239,8 @@ def mod_weighted_strength(
 ) -> None:
     """Set/Get strength of face (used in Weighted Normal modifier)
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param set: Set Value, Set value of faces
-    :type set: bool | None
     :param face_strength: Face Strength, Strength to use for assigning or selecting face influence for weighted normal modifier
-    :type face_strength: typing.Literal['WEAK','MEDIUM','STRONG'] | None
     """
 
 def normals_make_consistent(
@@ -1620,10 +1252,7 @@ def normals_make_consistent(
 ) -> None:
     """Make face and vertex normals point either outside or inside the mesh
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param inside: Inside
-    :type inside: bool | None
     """
 
 def normals_tools(
@@ -1636,8 +1265,6 @@ def normals_tools(
 ) -> None:
     """Custom normals tools using Normal Vector of UI
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param mode: Mode, Mode of tools taking input from interface
 
     COPY
@@ -1654,9 +1281,7 @@ def normals_tools(
 
     RESET
     Reset Normal -- Reset the internal clipboard and/or normal of selected element.
-        :type mode: typing.Literal['COPY','PASTE','ADD','MULTIPLY','RESET'] | None
         :param absolute: Absolute Coordinates, Copy Absolute coordinates of Normal vector
-        :type absolute: bool | None
     """
 
 def offset_edge_loops(
@@ -1668,10 +1293,7 @@ def offset_edge_loops(
 ) -> None:
     """Create offset edge loop from the current selection
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_cap_endpoint: Cap Endpoint, Extend loop around end-points
-    :type use_cap_endpoint: bool | None
     """
 
 def offset_edge_loops_slide(
@@ -1684,12 +1306,8 @@ def offset_edge_loops_slide(
 ) -> None:
     """Offset edge loop slide
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_offset_edge_loops: Offset Edge Loop, Create offset edge loop from the current selection
-    :type MESH_OT_offset_edge_loops: offset_edge_loops | None
     :param TRANSFORM_OT_edge_slide: Edge Slide, Slide an edge loop along a mesh
-    :type TRANSFORM_OT_edge_slide: bpy.ops.transform.edge_slide | None
     """
 
 def point_normals(
@@ -1710,8 +1328,6 @@ def point_normals(
 ) -> None:
     """Point selected custom normals to specified Target
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param mode: Mode, How to define coordinates to point custom normals to
 
     COORDINATES
@@ -1719,17 +1335,11 @@ def point_normals(
 
     MOUSE
     Mouse -- Follow mouse cursor.
-        :type mode: typing.Literal['COORDINATES','MOUSE'] | None
         :param invert: Invert, Invert affected normals
-        :type invert: bool | None
         :param align: Align, Make all affected normals parallel
-        :type align: bool | None
         :param target_location: Target, Target location to which normals will point
-        :type target_location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param spherize: Spherize, Interpolate between original and new normals
-        :type spherize: bool | None
         :param spherize_strength: Spherize Strength, Ratio of spherized normal to original normal
-        :type spherize_strength: float | None
     """
 
 def poke(
@@ -1744,12 +1354,8 @@ def poke(
 ) -> None:
     """Split a face into a fan
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param offset: Poke Offset, Poke Offset
-        :type offset: float | None
         :param use_relative_offset: Offset Relative, Scale the offset by surrounding geometry
-        :type use_relative_offset: bool | None
         :param center_mode: Poke Center, Poke face center calculation
 
     MEDIAN_WEIGHTED
@@ -1760,7 +1366,6 @@ def poke(
 
     BOUNDS
     Bounds -- Face bounds center.
-        :type center_mode: typing.Literal['MEDIAN_WEIGHTED','MEDIAN','BOUNDS'] | None
     """
 
 def polybuild_delete_at_cursor(
@@ -1780,24 +1385,14 @@ def polybuild_delete_at_cursor(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     """
 
 def polybuild_dissolve_at_cursor(
@@ -1805,11 +1400,7 @@ def polybuild_dissolve_at_cursor(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Undocumented, consider contributing.
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Undocumented, consider contributing."""
 
 def polybuild_extrude_at_cursor_move(
     execution_context: int | str | None = None,
@@ -1822,14 +1413,9 @@ def polybuild_extrude_at_cursor_move(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_polybuild_transform_at_cursor: Poly Build Transform at Cursor
-    :type MESH_OT_polybuild_transform_at_cursor: polybuild_transform_at_cursor | None
     :param MESH_OT_extrude_edges_indiv: Extrude Only Edges, Extrude individual edges only
-    :type MESH_OT_extrude_edges_indiv: extrude_edges_indiv | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def polybuild_face_at_cursor(
@@ -1850,26 +1436,15 @@ def polybuild_face_at_cursor(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param create_quads: Create Quads, Automatically split edges in triangles to maintain quad topology
-    :type create_quads: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     """
 
 def polybuild_face_at_cursor_move(
@@ -1882,12 +1457,8 @@ def polybuild_face_at_cursor_move(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_polybuild_face_at_cursor: Poly Build Face at Cursor
-    :type MESH_OT_polybuild_face_at_cursor: polybuild_face_at_cursor | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def polybuild_split_at_cursor(
@@ -1907,24 +1478,14 @@ def polybuild_split_at_cursor(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     """
 
 def polybuild_split_at_cursor_move(
@@ -1937,12 +1498,8 @@ def polybuild_split_at_cursor_move(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_polybuild_split_at_cursor: Poly Build Split at Cursor
-    :type MESH_OT_polybuild_split_at_cursor: polybuild_split_at_cursor | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def polybuild_transform_at_cursor(
@@ -1962,24 +1519,14 @@ def polybuild_transform_at_cursor(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     """
 
 def polybuild_transform_at_cursor_move(
@@ -1992,12 +1539,8 @@ def polybuild_transform_at_cursor_move(
 ) -> None:
     """Undocumented, consider contributing.
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_polybuild_transform_at_cursor: Poly Build Transform at Cursor
-    :type MESH_OT_polybuild_transform_at_cursor: polybuild_transform_at_cursor | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def primitive_circle_add(
@@ -2025,12 +1568,8 @@ def primitive_circle_add(
 ) -> None:
     """Construct a circle mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param vertices: Vertices
-        :type vertices: int | None
         :param radius: Radius
-        :type radius: float | None
         :param fill_type: Fill Type
 
     NOTHING
@@ -2041,11 +1580,8 @@ def primitive_circle_add(
 
     TRIFAN
     Triangle Fan -- Use triangle fans.
-        :type fill_type: typing.Literal['NOTHING','NGON','TRIFAN'] | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2056,13 +1592,9 @@ def primitive_circle_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_cone_add(
@@ -2092,16 +1624,10 @@ def primitive_cone_add(
 ) -> None:
     """Construct a conic mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param vertices: Vertices
-        :type vertices: int | None
         :param radius1: Radius 1
-        :type radius1: float | None
         :param radius2: Radius 2
-        :type radius2: float | None
         :param depth: Depth
-        :type depth: float | None
         :param end_fill_type: Base Fill Type
 
     NOTHING
@@ -2112,11 +1638,8 @@ def primitive_cone_add(
 
     TRIFAN
     Triangle Fan -- Use triangle fans.
-        :type end_fill_type: typing.Literal['NOTHING','NGON','TRIFAN'] | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2127,13 +1650,9 @@ def primitive_cone_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_cube_add(
@@ -2159,14 +1678,9 @@ def primitive_cube_add(
 ) -> None:
     """Construct a cube mesh that consists of six square faces
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param size: Size
-        :type size: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2177,13 +1691,9 @@ def primitive_cube_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_cube_add_gizmo(
@@ -2216,12 +1726,8 @@ def primitive_cube_add_gizmo(
 ) -> None:
     """Construct a cube mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2232,15 +1738,10 @@ def primitive_cube_add_gizmo(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
         :param matrix: Matrix
-        :type matrix: collections.abc.Sequence[collections.abc.Sequence[float]] | mathutils.Matrix | None
     """
 
 def primitive_cylinder_add(
@@ -2269,14 +1770,9 @@ def primitive_cylinder_add(
 ) -> None:
     """Construct a cylinder mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param vertices: Vertices
-        :type vertices: int | None
         :param radius: Radius
-        :type radius: float | None
         :param depth: Depth
-        :type depth: float | None
         :param end_fill_type: Cap Fill Type
 
     NOTHING
@@ -2287,11 +1783,8 @@ def primitive_cylinder_add(
 
     TRIFAN
     Triangle Fan -- Use triangle fans.
-        :type end_fill_type: typing.Literal['NOTHING','NGON','TRIFAN'] | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2302,13 +1795,9 @@ def primitive_cylinder_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_grid_add(
@@ -2336,18 +1825,11 @@ def primitive_grid_add(
 ) -> None:
     """Construct a subdivided plane mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param x_subdivisions: X Subdivisions
-        :type x_subdivisions: int | None
         :param y_subdivisions: Y Subdivisions
-        :type y_subdivisions: int | None
         :param size: Size
-        :type size: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2358,13 +1840,9 @@ def primitive_grid_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_ico_sphere_add(
@@ -2391,16 +1869,10 @@ def primitive_ico_sphere_add(
 ) -> None:
     """Construct a spherical mesh that consists of equally sized triangles
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param subdivisions: Subdivisions
-        :type subdivisions: int | None
         :param radius: Radius
-        :type radius: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2411,13 +1883,9 @@ def primitive_ico_sphere_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_monkey_add(
@@ -2443,14 +1911,9 @@ def primitive_monkey_add(
 ) -> None:
     """Construct a Suzanne mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param size: Size
-        :type size: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2461,13 +1924,9 @@ def primitive_monkey_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_plane_add(
@@ -2493,14 +1952,9 @@ def primitive_plane_add(
 ) -> None:
     """Construct a filled planar mesh with 4 vertices
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param size: Size
-        :type size: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2511,13 +1965,9 @@ def primitive_plane_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def primitive_torus_add(
@@ -2547,8 +1997,6 @@ def primitive_torus_add(
 ) -> None:
     """Construct a torus mesh
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param align: Align
 
     WORLD
@@ -2559,15 +2007,10 @@ def primitive_torus_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param major_segments: Major Segments, Number of segments for the main ring of the torus
-        :type major_segments: int | None
         :param minor_segments: Minor Segments, Number of segments for the minor ring of the torus
-        :type minor_segments: int | None
         :param mode: Dimensions Mode
 
     MAJOR_MINOR
@@ -2575,17 +2018,11 @@ def primitive_torus_add(
 
     EXT_INT
     Exterior/Interior -- Use the exterior/interior radii for torus dimensions.
-        :type mode: typing.Literal['MAJOR_MINOR','EXT_INT'] | None
         :param major_radius: Major Radius, Radius from the origin to the center of the cross sections
-        :type major_radius: float | None
         :param minor_radius: Minor Radius, Radius of the torus cross section
-        :type minor_radius: float | None
         :param abso_major_rad: Exterior Radius, Total Exterior Radius of the torus
-        :type abso_major_rad: float | None
         :param abso_minor_rad: Interior Radius, Total Interior Radius of the torus
-        :type abso_minor_rad: float | None
         :param generate_uvs: Generate UVs, Generate a default UV map
-        :type generate_uvs: bool | None
     """
 
 def primitive_uv_sphere_add(
@@ -2613,18 +2050,11 @@ def primitive_uv_sphere_add(
 ) -> None:
     """Construct a spherical mesh with quad faces, except for triangle faces at the top and bottom
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param segments: Segments
-        :type segments: int | None
         :param ring_count: Rings
-        :type ring_count: int | None
         :param radius: Radius
-        :type radius: float | None
         :param calc_uvs: Generate UVs, Generate a default UV map
-        :type calc_uvs: bool | None
         :param enter_editmode: Enter Edit Mode, Enter edit mode when adding this object
-        :type enter_editmode: bool | None
         :param align: Align, The alignment of the new object
 
     WORLD
@@ -2635,13 +2065,9 @@ def primitive_uv_sphere_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: typing.Literal['WORLD','VIEW','CURSOR'] | None
         :param location: Location, Location for the newly added object
-        :type location: collections.abc.Sequence[float] | mathutils.Vector | None
         :param rotation: Rotation, Rotation for the newly added object
-        :type rotation: collections.abc.Sequence[float] | mathutils.Euler | None
         :param scale: Scale, Scale for the newly added object
-        :type scale: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def quads_convert_to_tris(
@@ -2656,12 +2082,8 @@ def quads_convert_to_tris(
 ) -> None:
     """Triangulate selected faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param quad_method: Quad Method, Method for splitting the quads into triangles
-    :type quad_method: bpy.stub_internal.rna_enums.ModifierTriangulateQuadMethodItems | None
     :param ngon_method: N-gon Method, Method for splitting the n-gons into triangles
-    :type ngon_method: bpy.stub_internal.rna_enums.ModifierTriangulateNgonMethodItems | None
     """
 
 def region_to_loop(
@@ -2669,11 +2091,7 @@ def region_to_loop(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select boundary edges around the selected faces
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select boundary edges around the selected faces"""
 
 def remove_doubles(
     execution_context: int | str | None = None,
@@ -2687,16 +2105,10 @@ def remove_doubles(
 ) -> None:
     """Merge vertices based on their proximity
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param threshold: Merge Distance, Maximum distance between elements to merge
-    :type threshold: float | None
     :param use_centroid: Centroid Merge, Move vertices to the centroid of the duplicate cluster, otherwise the vertex closest to the centroid is used.
-    :type use_centroid: bool | None
     :param use_unselected: Unselected, Merge selected to other unselected vertices
-    :type use_unselected: bool | None
     :param use_sharp_edge_from_normals: Sharp Edges, Calculate sharp edges using custom normal data (when available)
-    :type use_sharp_edge_from_normals: bool | None
     """
 
 def reorder_vertices_spatial(
@@ -2704,11 +2116,7 @@ def reorder_vertices_spatial(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Reorder mesh faces and vertices based on their spatial position for better BVH building and sculpting performance.
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Reorder mesh faces and vertices based on their spatial position for better BVH building and sculpting performance."""
 
 def reveal(
     execution_context: int | str | None = None,
@@ -2719,10 +2127,7 @@ def reveal(
 ) -> None:
     """Reveal all hidden vertices, edges and faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param select: Select
-    :type select: bool | None
     """
 
 def rip(
@@ -2743,26 +2148,15 @@ def rip(
 ) -> None:
     """Disconnect vertex or edges from connected geometry
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     :param use_fill: Fill, Fill the ripped region
-    :type use_fill: bool | None
     """
 
 def rip_edge(
@@ -2782,24 +2176,14 @@ def rip_edge(
 ) -> None:
     """Extend vertices along the edge closest to the cursor
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param mirror: Mirror Editing
-    :type mirror: bool | None
     :param use_proportional_edit: Proportional Editing
-    :type use_proportional_edit: bool | None
     :param proportional_edit_falloff: Proportional Falloff, Falloff type for proportional editing mode
-    :type proportional_edit_falloff: bpy.stub_internal.rna_enums.ProportionalFalloffItems | None
     :param proportional_size: Proportional Size
-    :type proportional_size: float | None
     :param use_proportional_connected: Connected
-    :type use_proportional_connected: bool | None
     :param use_proportional_projected: Projected (2D)
-    :type use_proportional_projected: bool | None
     :param release_confirm: Confirm on Release, Always confirm operation when releasing button
-    :type release_confirm: bool | None
     :param use_accurate: Accurate, Use accurate transformation
-    :type use_accurate: bool | None
     """
 
 def rip_edge_move(
@@ -2812,12 +2196,8 @@ def rip_edge_move(
 ) -> None:
     """Extend vertices and move the result
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_rip_edge: Extend Vertices, Extend vertices along the edge closest to the cursor
-    :type MESH_OT_rip_edge: rip_edge | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def rip_move(
@@ -2830,12 +2210,8 @@ def rip_move(
 ) -> None:
     """Rip polygons and move the result
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param MESH_OT_rip: Rip, Disconnect vertex or edges from connected geometry
-    :type MESH_OT_rip: rip | None
     :param TRANSFORM_OT_translate: Move, Move selected items
-    :type TRANSFORM_OT_translate: bpy.ops.transform.translate | None
     """
 
 def screw(
@@ -2850,16 +2226,10 @@ def screw(
 ) -> None:
     """Extrude selected vertices in screw-shaped rotation around the cursor in indicated viewport
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param steps: Steps, Steps
-    :type steps: int | None
     :param turns: Turns, Turns
-    :type turns: int | None
     :param center: Center, Center in global view space
-    :type center: collections.abc.Sequence[float] | mathutils.Vector | None
     :param axis: Axis, Axis in global view space
-    :type axis: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def select_all(
@@ -2871,8 +2241,6 @@ def select_all(
 ) -> None:
     """(De)select all vertices, edges or faces
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param action: Action, Selection action to execute
 
     TOGGLE
@@ -2886,7 +2254,6 @@ def select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: typing.Literal['TOGGLE','SELECT','DESELECT','INVERT'] | None
     """
 
 def select_axis(
@@ -2901,16 +2268,10 @@ def select_axis(
 ) -> None:
     """Select all data in the mesh on a single axis
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param orientation: Axis Mode, Axis orientation
-    :type orientation: bpy.stub_internal.rna_enums.TransformOrientationItems | None
     :param sign: Axis Sign, Side to select
-    :type sign: typing.Literal['POS','NEG','ALIGN'] | None
     :param axis: Axis, Select the axis to compare each vertex on
-    :type axis: bpy.stub_internal.rna_enums.AxisXyzItems | None
     :param threshold: Threshold
-    :type threshold: float | None
     """
 
 def select_by_attribute(
@@ -2918,11 +2279,7 @@ def select_by_attribute(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select elements based on the active boolean attribute
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select elements based on the active boolean attribute"""
 
 def select_by_pole_count(
     execution_context: int | str | None = None,
@@ -2936,16 +2293,10 @@ def select_by_pole_count(
 ) -> None:
     """Select vertices at poles by the number of connected edges. In edge and face mode the geometry connected to the vertices is selected
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param pole_count: Pole Count
-    :type pole_count: int | None
     :param type: Type, Type of comparison to make
-    :type type: typing.Literal['LESS','EQUAL','GREATER','NOTEQUAL'] | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     :param exclude_nonmanifold: Exclude Non Manifold, Exclude non-manifold poles
-    :type exclude_nonmanifold: bool | None
     """
 
 def select_face_by_sides(
@@ -2959,14 +2310,9 @@ def select_face_by_sides(
 ) -> None:
     """Select vertices or faces by the number of face sides
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param number: Number of Vertices
-    :type number: int | None
     :param type: Type, Type of comparison to make
-    :type type: typing.Literal['LESS','EQUAL','GREATER','NOTEQUAL'] | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     """
 
 def select_interior_faces(
@@ -2974,11 +2320,7 @@ def select_interior_faces(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select faces where all edges have more than 2 face users
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select faces where all edges have more than 2 face users"""
 
 def select_less(
     execution_context: int | str | None = None,
@@ -2989,10 +2331,7 @@ def select_less(
 ) -> None:
     """Deselect vertices, edges or faces at the boundary of each selection region
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_face_step: Face Step, Connected faces (instead of edges)
-    :type use_face_step: bool | None
     """
 
 def select_linked(
@@ -3004,10 +2343,7 @@ def select_linked(
 ) -> None:
     """Select all vertices connected to the current selection
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param delimit: Delimit, Delimit selected region
-    :type delimit: set[bpy.stub_internal.rna_enums.MeshDelimitModeItems] | None
     """
 
 def select_linked_pick(
@@ -3022,14 +2358,8 @@ def select_linked_pick(
 ) -> None:
     """(De)select all vertices linked to the edge under the mouse cursor
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param deselect: Deselect
-    :type deselect: bool | None
     :param delimit: Delimit, Delimit selected region
-    :type delimit: set[bpy.stub_internal.rna_enums.MeshDelimitModeItems] | None
-    :type object_index: int | None
-    :type index: int | None
     """
 
 def select_loose(
@@ -3041,10 +2371,7 @@ def select_loose(
 ) -> None:
     """Select loose geometry based on the selection mode
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     """
 
 def select_mirror(
@@ -3057,12 +2384,8 @@ def select_mirror(
 ) -> None:
     """Select mesh items at mirrored locations
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param axis: Axis
-    :type axis: set[bpy.stub_internal.rna_enums.AxisFlagXyzItems] | None
     :param extend: Extend, Extend the existing selection
-    :type extend: bool | None
     """
 
 def select_mode(
@@ -3077,14 +2400,9 @@ def select_mode(
 ) -> None:
     """Change selection mode
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param use_extend: Extend
-        :type use_extend: bool | None
         :param use_expand: Expand
-        :type use_expand: bool | None
         :param type: Type
-        :type type: bpy.stub_internal.rna_enums.MeshSelectModeItems | None
         :param action: Action, Selection action to execute
 
     DISABLE
@@ -3095,7 +2413,6 @@ def select_mode(
 
     TOGGLE
     Toggle -- Toggle disabled flag for selected markers.
-        :type action: typing.Literal['DISABLE','ENABLE','TOGGLE'] | None
     """
 
 def select_more(
@@ -3107,10 +2424,7 @@ def select_more(
 ) -> None:
     """Select more vertices, edges or faces connected to initial selection
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_face_step: Face Step, Connected faces (instead of edges)
-    :type use_face_step: bool | None
     """
 
 def select_next_item(
@@ -3118,11 +2432,7 @@ def select_next_item(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select the next element (using selection order)
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select the next element (using selection order)"""
 
 def select_non_manifold(
     execution_context: int | str | None = None,
@@ -3138,20 +2448,12 @@ def select_non_manifold(
 ) -> None:
     """Select all non-manifold vertices or edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     :param use_wire: Wire, Wire edges
-    :type use_wire: bool | None
     :param use_boundary: Boundaries, Boundary edges
-    :type use_boundary: bool | None
     :param use_multi_face: Multiple Faces, Edges shared by more than two faces
-    :type use_multi_face: bool | None
     :param use_non_contiguous: Non Contiguous, Edges between faces pointing in alternate directions
-    :type use_non_contiguous: bool | None
     :param use_verts: Vertices, Vertices connecting multiple face regions
-    :type use_verts: bool | None
     """
 
 def select_nth(
@@ -3165,14 +2467,9 @@ def select_nth(
 ) -> None:
     """Deselect every Nth element starting from the active vertex, edge or face
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param skip: Deselected, Number of deselected elements in the repetitive sequence
-    :type skip: int | None
     :param nth: Selected, Number of selected elements in the repetitive sequence
-    :type nth: int | None
     :param offset: Offset, Offset from the starting point
-    :type offset: int | None
     """
 
 def select_prev_item(
@@ -3180,11 +2477,7 @@ def select_prev_item(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select the previous element (using selection order)
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select the previous element (using selection order)"""
 
 def select_random(
     execution_context: int | str | None = None,
@@ -3197,12 +2490,8 @@ def select_random(
 ) -> None:
     """Randomly select vertices
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param ratio: Ratio, Portion of items to select randomly
-        :type ratio: float | None
         :param seed: Random Seed, Seed for the random number generator
-        :type seed: int | None
         :param action: Action, Selection action to execute
 
     SELECT
@@ -3210,7 +2499,6 @@ def select_random(
 
     DESELECT
     Deselect -- Deselect all elements.
-        :type action: typing.Literal['SELECT','DESELECT'] | None
     """
 
 def select_similar(
@@ -3248,14 +2536,9 @@ def select_similar(
 ) -> None:
     """Select similar vertices, edges or faces by property types
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param type: Type
-    :type type: typing.Literal['VERT_NORMAL','VERT_FACES','VERT_GROUPS','VERT_EDGES','VERT_CREASE','EDGE_LENGTH','EDGE_DIR','EDGE_FACES','EDGE_FACE_ANGLE','EDGE_CREASE','EDGE_BEVEL','EDGE_SEAM','EDGE_SHARP','EDGE_FREESTYLE','FACE_MATERIAL','FACE_AREA','FACE_SIDES','FACE_PERIMETER','FACE_NORMAL','FACE_COPLANAR','FACE_SMOOTH','FACE_FREESTYLE'] | None
     :param compare: Compare
-    :type compare: typing.Literal['EQUAL','GREATER','LESS'] | None
     :param threshold: Threshold
-    :type threshold: float | None
     """
 
 def select_similar_region(
@@ -3263,11 +2546,7 @@ def select_similar_region(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Select similar face regions to the current selection
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Select similar face regions to the current selection"""
 
 def select_ungrouped(
     execution_context: int | str | None = None,
@@ -3278,10 +2557,7 @@ def select_ungrouped(
 ) -> None:
     """Select vertices without a group
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param extend: Extend, Extend the selection
-    :type extend: bool | None
     """
 
 def separate(
@@ -3293,10 +2569,7 @@ def separate(
 ) -> None:
     """Separate selected geometry into a new mesh
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param type: Type
-    :type type: typing.Literal['SELECTED','MATERIAL','LOOSE'] | None
     """
 
 def set_normals_from_faces(
@@ -3308,10 +2581,7 @@ def set_normals_from_faces(
 ) -> None:
     """Set the custom normals from the selected faces ones
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param keep_sharp: Keep Sharp Edges, Do not set sharp edges to face
-    :type keep_sharp: bool | None
     """
 
 def set_sharpness_by_angle(
@@ -3324,12 +2594,8 @@ def set_sharpness_by_angle(
 ) -> None:
     """Set edge sharpness based on the angle between neighboring faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param angle: Angle
-    :type angle: float | None
     :param extend: Extend, Add new sharp edges without clearing existing sharp edges
-    :type extend: bool | None
     """
 
 def shape_propagate_to_all(
@@ -3337,11 +2603,7 @@ def shape_propagate_to_all(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Apply selected vertex locations to all other shape keys
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Apply selected vertex locations to all other shape keys"""
 
 def shortest_path_pick(
     execution_context: int | str | None = None,
@@ -3360,23 +2622,13 @@ def shortest_path_pick(
 ) -> None:
     """Select shortest path between two selections
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param edge_mode: Edge Tag, The edge flag to tag when selecting the shortest path
-    :type edge_mode: typing.Literal['SELECT','SEAM','SHARP','CREASE','BEVEL','FREESTYLE'] | None
     :param use_face_step: Face Stepping, Traverse connected faces (includes diagonals and edge-rings)
-    :type use_face_step: bool | None
     :param use_topology_distance: Topology Distance, Find the minimum number of steps, ignoring spatial distance
-    :type use_topology_distance: bool | None
     :param use_fill: Fill Region, Select all paths between the source/destination elements
-    :type use_fill: bool | None
     :param skip: Deselected, Number of deselected elements in the repetitive sequence
-    :type skip: int | None
     :param nth: Selected, Number of selected elements in the repetitive sequence
-    :type nth: int | None
     :param offset: Offset, Offset from the starting point
-    :type offset: int | None
-    :type index: int | None
     """
 
 def shortest_path_select(
@@ -3395,22 +2647,13 @@ def shortest_path_select(
 ) -> None:
     """Selected shortest path between two vertices/edges/faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param edge_mode: Edge Tag, The edge flag to tag when selecting the shortest path
-    :type edge_mode: typing.Literal['SELECT','SEAM','SHARP','CREASE','BEVEL','FREESTYLE'] | None
     :param use_face_step: Face Stepping, Traverse connected faces (includes diagonals and edge-rings)
-    :type use_face_step: bool | None
     :param use_topology_distance: Topology Distance, Find the minimum number of steps, ignoring spatial distance
-    :type use_topology_distance: bool | None
     :param use_fill: Fill Region, Select all paths between the source/destination elements
-    :type use_fill: bool | None
     :param skip: Deselected, Number of deselected elements in the repetitive sequence
-    :type skip: int | None
     :param nth: Selected, Number of selected elements in the repetitive sequence
-    :type nth: int | None
     :param offset: Offset, Offset from the starting point
-    :type offset: int | None
     """
 
 def smooth_normals(
@@ -3422,10 +2665,7 @@ def smooth_normals(
 ) -> None:
     """Smooth custom normals based on adjacent vertex normals
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param factor: Factor, Specifies weight of smooth vs original normal
-    :type factor: float | None
     """
 
 def solidify(
@@ -3437,10 +2677,7 @@ def solidify(
 ) -> None:
     """Create a solid skin by extruding, compensating for sharp angles
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param thickness: Thickness
-    :type thickness: float | None
     """
 
 def sort_elements(
@@ -3464,8 +2701,6 @@ def sort_elements(
 ) -> None:
     """The order of selected vertices/edges/faces is modified, based on a given method
 
-        :type execution_context: int | str | None
-        :type undo: bool | None
         :param type: Type, Type of reordering operation to apply
 
     VIEW_ZAXIS
@@ -3489,13 +2724,9 @@ def sort_elements(
 
     REVERSE
     Reverse -- Reverse current order of selected elements.
-        :type type: typing.Literal['VIEW_ZAXIS','VIEW_XAXIS','CURSOR_DISTANCE','MATERIAL','SELECTED','RANDOMIZE','REVERSE'] | None
         :param elements: Elements, Which elements to affect (vertices, edges and/or faces)
-        :type elements: set[typing.Literal['VERT','EDGE','FACE']] | None
         :param reverse: Reverse, Reverse the sorting effect
-        :type reverse: bool | None
         :param seed: Seed, Seed for random-based operations
-        :type seed: int | None
     """
 
 def spin(
@@ -3513,22 +2744,13 @@ def spin(
 ) -> None:
     """Extrude selected vertices in a circle around the cursor in indicated viewport
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param steps: Steps, Steps
-    :type steps: int | None
     :param dupli: Use Duplicates
-    :type dupli: bool | None
     :param angle: Angle, Rotation for each step
-    :type angle: float | None
     :param use_auto_merge: Auto Merge, Merge first/last when the angle is a full revolution
-    :type use_auto_merge: bool | None
     :param use_normal_flip: Flip Normals
-    :type use_normal_flip: bool | None
     :param center: Center, Center in global view space
-    :type center: collections.abc.Sequence[float] | mathutils.Vector | None
     :param axis: Axis, Axis in global view space
-    :type axis: collections.abc.Sequence[float] | mathutils.Vector | None
     """
 
 def split(
@@ -3536,22 +2758,14 @@ def split(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Split off selected geometry from connected unselected geometry
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Split off selected geometry from connected unselected geometry"""
 
 def split_normals(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Split custom normals of selected vertices
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Split custom normals of selected vertices"""
 
 def subdivide(
     execution_context: int | str | None = None,
@@ -3569,22 +2783,13 @@ def subdivide(
 ) -> None:
     """Subdivide selected edges
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param number_cuts: Number of Cuts
-    :type number_cuts: int | None
     :param smoothness: Smoothness, Smoothness factor
-    :type smoothness: float | None
     :param ngon: Create N-Gons, When disabled, newly created faces are limited to 3 and 4 sided faces
-    :type ngon: bool | None
     :param quadcorner: Quad Corner Type, How to subdivide quad corners (anything other than Straight Cut will prevent n-gons)
-    :type quadcorner: typing.Literal['INNERVERT','PATH','STRAIGHT_CUT','FAN'] | None
     :param fractal: Fractal, Fractal randomness factor
-    :type fractal: float | None
     :param fractal_along_normal: Along Normal, Apply fractal displacement along normal only
-    :type fractal_along_normal: float | None
     :param seed: Random Seed, Seed for the random number generator
-    :type seed: int | None
     """
 
 def subdivide_edgering(
@@ -3601,18 +2806,11 @@ def subdivide_edgering(
 ) -> None:
     """Subdivide perpendicular edges to the selected edge-ring
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param number_cuts: Number of Cuts
-    :type number_cuts: int | None
     :param interpolation: Interpolation, Interpolation method
-    :type interpolation: typing.Literal['LINEAR','PATH','SURFACE'] | None
     :param smoothness: Smoothness, Smoothness factor
-    :type smoothness: float | None
     :param profile_shape_factor: Profile Factor, How much intermediary new edges are shrunk/expanded
-    :type profile_shape_factor: float | None
     :param profile_shape: Profile Shape, Shape of the profile
-    :type profile_shape: bpy.stub_internal.rna_enums.ProportionalFalloffCurveOnlyItems | None
     """
 
 def symmetrize(
@@ -3626,12 +2824,8 @@ def symmetrize(
 ) -> None:
     """Enforce symmetry (both form and topological) across an axis
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param direction: Direction, Which sides to copy from and to
-    :type direction: bpy.stub_internal.rna_enums.SymmetrizeDirectionItems | None
     :param threshold: Threshold, Limit for snap middle vertices to the axis center
-    :type threshold: float | None
     """
 
 def symmetry_snap(
@@ -3647,16 +2841,10 @@ def symmetry_snap(
 ) -> None:
     """Snap vertex pairs to their mirrored locations
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param direction: Direction, Which sides to copy from and to
-    :type direction: bpy.stub_internal.rna_enums.SymmetrizeDirectionItems | None
     :param threshold: Threshold, Distance within which matching vertices are searched
-    :type threshold: float | None
     :param factor: Factor, Mix factor of the locations of the vertices
-    :type factor: float | None
     :param use_center: Center, Snap middle vertices to the axis center
-    :type use_center: bool | None
     """
 
 def tris_convert_to_quads(
@@ -3676,26 +2864,15 @@ def tris_convert_to_quads(
 ) -> None:
     """Merge triangles into four sided polygons where possible
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param face_threshold: Max Face Angle, Face angle limit
-    :type face_threshold: float | None
     :param shape_threshold: Max Shape Angle, Shape angle limit
-    :type shape_threshold: float | None
     :param topology_influence: Topology Influence, How much to prioritize regular grids of quads as well as quads that touch existing quads
-    :type topology_influence: float | None
     :param uvs: Compare UVs
-    :type uvs: bool | None
     :param vcols: Compare Color Attributes
-    :type vcols: bool | None
     :param seam: Compare Seam
-    :type seam: bool | None
     :param sharp: Compare Sharp
-    :type sharp: bool | None
     :param materials: Compare Materials
-    :type materials: bool | None
     :param deselect_joined: Deselect Joined, Only select remaining triangles that were not merged
-    :type deselect_joined: bool | None
     """
 
 def unsubdivide(
@@ -3707,10 +2884,7 @@ def unsubdivide(
 ) -> None:
     """Un-subdivide selected edges and faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param iterations: Iterations, Number of times to un-subdivide
-    :type iterations: int | None
     """
 
 def uv_texture_add(
@@ -3718,33 +2892,21 @@ def uv_texture_add(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Add UV map
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Add UV map"""
 
 def uv_texture_remove(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Remove UV map
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Remove UV map"""
 
 def uvs_reverse(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Flip direction of UV coordinates inside faces
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Flip direction of UV coordinates inside faces"""
 
 def uvs_rotate(
     execution_context: int | str | None = None,
@@ -3755,10 +2917,7 @@ def uvs_rotate(
 ) -> None:
     """Rotate UV coordinates inside faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_ccw: Counter Clockwise
-    :type use_ccw: bool | None
     """
 
 def vert_connect(
@@ -3766,22 +2925,14 @@ def vert_connect(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Connect selected vertices of faces, splitting the face
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Connect selected vertices of faces, splitting the face"""
 
 def vert_connect_concave(
     execution_context: int | str | None = None,
     undo: bool | None = None,
     /,
 ) -> None:
-    """Make all faces convex
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Make all faces convex"""
 
 def vert_connect_nonplanar(
     execution_context: int | str | None = None,
@@ -3792,10 +2943,7 @@ def vert_connect_nonplanar(
 ) -> None:
     """Split non-planar faces that exceed the angle threshold
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param angle_limit: Max Angle, Angle limit
-    :type angle_limit: float | None
     """
 
 def vert_connect_path(
@@ -3803,11 +2951,7 @@ def vert_connect_path(
     undo: bool | None = None,
     /,
 ) -> None:
-    """Connect vertices by their selection order, creating edges, splitting faces
-
-    :type execution_context: int | str | None
-    :type undo: bool | None
-    """
+    """Connect vertices by their selection order, creating edges, splitting faces"""
 
 def vertices_smooth(
     execution_context: int | str | None = None,
@@ -3823,20 +2967,12 @@ def vertices_smooth(
 ) -> None:
     """Flatten angles of selected vertices
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param factor: Smoothing, Smoothing factor
-    :type factor: float | None
     :param repeat: Repeat, Number of times to smooth the mesh
-    :type repeat: int | None
     :param xaxis: X-Axis, Smooth along the X axis
-    :type xaxis: bool | None
     :param yaxis: Y-Axis, Smooth along the Y axis
-    :type yaxis: bool | None
     :param zaxis: Z-Axis, Smooth along the Z axis
-    :type zaxis: bool | None
     :param wait_for_input: Wait for Input
-    :type wait_for_input: bool | None
     """
 
 def vertices_smooth_laplacian(
@@ -3854,22 +2990,13 @@ def vertices_smooth_laplacian(
 ) -> None:
     """Laplacian smooth of selected vertices
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param repeat: Number of iterations to smooth the mesh
-    :type repeat: int | None
     :param lambda_factor: Lambda factor
-    :type lambda_factor: float | None
     :param lambda_border: Lambda factor in border
-    :type lambda_border: float | None
     :param use_x: Smooth X Axis, Smooth object along X axis
-    :type use_x: bool | None
     :param use_y: Smooth Y Axis, Smooth object along Y axis
-    :type use_y: bool | None
     :param use_z: Smooth Z Axis, Smooth object along Z axis
-    :type use_z: bool | None
     :param preserve_volume: Preserve Volume, Apply volume preservation after smooth
-    :type preserve_volume: bool | None
     """
 
 def wireframe(
@@ -3888,22 +3015,12 @@ def wireframe(
 ) -> None:
     """Create a solid wireframe from faces
 
-    :type execution_context: int | str | None
-    :type undo: bool | None
     :param use_boundary: Boundary, Inset face boundaries
-    :type use_boundary: bool | None
     :param use_even_offset: Offset Even, Scale the offset to give more even thickness
-    :type use_even_offset: bool | None
     :param use_relative_offset: Offset Relative, Scale the offset by surrounding geometry
-    :type use_relative_offset: bool | None
     :param use_replace: Replace, Remove original faces
-    :type use_replace: bool | None
     :param thickness: Thickness
-    :type thickness: float | None
     :param offset: Offset
-    :type offset: float | None
     :param use_crease: Crease, Crease hub edges for an improved subdivision surface
-    :type use_crease: bool | None
     :param crease_weight: Crease Weight
-    :type crease_weight: float | None
     """