cgse 2023.38.0__py3-none-any.whl → 2024.1.3__py3-none-any.whl

egse/fee/fee.py

@@ -1,631 +0,0 @@
-"""
-This module contains functions and classes that are typically used by the FEE.
-"""
-import ctypes
-import logging
-from pathlib import Path
-
-import numpy as np
-
-from egse import h5
-from egse.bits import beautify_binary
-from egse.decorators import static_vars
-from egse.dsi import constants
-from egse.dsi.esl import ESL
-from egse.dsi.esl import ESLError
-from egse.dsi.esl import esl_flush
-from egse.dsi.esl import esl_get_esl_error
-from egse.dsi.esl import esl_read_packet
-from egse.dsi.esl import esl_write_packet
-from egse.dsi.esl import get_extension_name
-from egse.dsi.esl import get_terminator_name
-from egse.dsi.esl import is_extension_code
-from egse.dsi.esl import is_terminator_code
-from egse.dsi.esl import pretty_print_packet
-from egse.dsi.rmap import CheckError
-from egse.dsi.rmap import ESL_RMAP
-from egse.dsi.rmap import check_data_crc
-from egse.dsi.rmap import check_header_crc
-from egse.dsi.rmap import check_initiator_logical_address
-from egse.dsi.rmap import check_instruction
-from egse.dsi.rmap import check_key
-from egse.dsi.rmap import check_protocol_id
-from egse.dsi.rmap import check_target_logical_address
-from egse.dsi.rmap import create_rmap_read_reply_packet
-from egse.dsi.rmap import get_address
-from egse.dsi.rmap import get_data_length
-from egse.dsi.rmap import get_instruction_field
-from egse.dsi.rmap import get_transaction_identifier
-from egse.dsi.rmap import is_command
-from egse.dsi.rmap import is_increment
-from egse.dsi.rmap import is_write
-from egse.dsi.rmap import rmap_crc_check
-from egse.dsi.spw import handle_extension_packet
-from egse.dsi.spw import handle_special_packet
-from egse.settings import Settings
-from egse.spw import DataPacketHeader
-from egse.spw import PacketType
-from egse.spw import SpaceWirePacket
-from egse.state import GlobalState
-from egse.system import Timer
-
-fee_settings = Settings.load("FEE")
-dsi_settings = Settings.load("DSI")
-site_settings = Settings.load("SITE")
-
-LOGGER = logging.getLogger(__name__)
-
-DATA_DIR = (Path(__file__).parent / "../../data").resolve()
-
-
-def create_pattern_data(timecode: int, ccd_id: int, ccd_side: int) -> np.ndarray:
-    """
-    Create pattern data as a two-dimensional ND array. The pattern data is generated as described
-    in PLATO-LESIA-PL-TN-023 - SimuCam pattern requirement.
-
-    The pattern is build up like this: each pixel is a 16-bit number with the following structure:
-
-        * Bits [15:13] = time-code % 8
-        * Bits [12:11] = CCD number [1, 2, 3, 4]  should be [0-3]!
-        * Bit [10] = CCD side: 0 = left side, 1 = right side
-        * Bits [9:5] = Y-coordinate % 32
-        * Bits [4:0] = X-coordinate % 32
-
-    The total image data size of a full frame CCD is:
-
-        x = 4590 = 2 x (25 [serial prescan] + 2255 + 15 [serial overscan])
-        y = 4540 = 4510 + 30 [parallel overscan]
-
-    This function creates each side of the CCD separately, so each half can be treated individually
-    as is done in the N-FEE. The two sides can easily be concatenated to form the full image:
-
-        data = np.concatenate((data_left, data_right), axis=1)
-
-    Args:
-        timecode (int): the timecode for this readout
-        ccd_id (int): the CCD number [0-3]
-        ccd_side (int): the CCD side, 0 = left = E-side, 1 = right = F-side
-    Returns:
-        A two-dimensional ND array representing half of a CCD.
-    """
-
-    ccd_number = ccd_id  # save for later use
-
-    timecode = (timecode % 8) << 13  # timecode is 3 bits at [15:13]
-    ccd_id = (ccd_id & 0b0011) << 11  # ccd_id is 2 bits at [12:11]
-    ccd_side = (ccd_side & 0b0001) << 10  # ccd_side is 1 bit at [10]
-
-    x_size = 25 + 2255 + 15
-    y_size = 4510 + 30
-
-    rows, cols = np.indices((y_size, x_size), dtype=np.uint16)
-    cols %= 32
-    rows %= 32
-
-    data = rows * 16 + cols + timecode + ccd_side + ccd_id
-
-    # We leave set the msb because of the bit flipt for N-FEE EM
-
-    data[50:300, 100:105] = ccd_number | 0b10000000_00000000
-    data[100:105, 50:500] = ccd_number | 0b10000000_00000000
-    data[300:305, 50:150] = ccd_number | 0b10000000_00000000
-    data[50:150, 500:505] = ccd_number | 0b10000000_00000000
-
-    # We unset the msb because of the bit flip for N-FEE EM
-
-    data[110, 110] = 0x7FFF
-
-    return data
-
-
-def generate_data_packets(data: np.ndarray, header: DataPacketHeader,
-                          v_start: int, v_end: int):
-    """
-    This generator function creates and returns the SpaceWire packets to send to the DPU Processor.
-
-    Args:
-        data (ndarray): the full frame image data
-        header (DataPacketHeader): the data packet header
-        v_start (int): the first row to be transmitted
-        v_end (int): the last row to be transmitted
-
-    Returns:
-
-    """
-    # steps:
-    # * reshape data to 1D array
-    # * update header with length, last_packet
-    # * increment sequence number?
-    # * convert data part into bytes object
-    # * concatenate header and data -> bytes
-    # * yield the packet
-
-    N_FEE_SIDE = GlobalState.setup.camera.fee.ccd_sides.enum
-
-    MAX_PACKET_SIZE = 32140  # this is a register value reg_4_config
-    HEADER_LENGTH = 10
-    H_END = 2294
-    MAX_CCD_LINE = 4509
-    MAX_OVERSCAN_LINE = MAX_CCD_LINE + 30
-
-    nr_rows_in_packet = row_offset = (MAX_PACKET_SIZE - HEADER_LENGTH) // (H_END + 1) // 2
-
-    y_size, x_size = data.shape
-    h_end = x_size - 1
-    v_end_ccd = min(MAX_CCD_LINE, v_end)
-
-    ccd_side = header.type_as_object.ccd_side
-
-    # F-side is read out starting from the right, so we flip the data left to right
-    # before sending, which simulates the reverse readout.
-
-    data = np.fliplr(data) if ccd_side == N_FEE_SIDE.RIGHT_SIDE else data
-
-    header.length = nr_rows_in_packet * ((h_end + 1) * 2)
-    LOGGER.debug(f"{header.length = }, {nr_rows_in_packet = }, {h_end = }")
-
-    for idx in range(v_start, v_end_ccd + 1, nr_rows_in_packet):
-        if idx + nr_rows_in_packet > v_end_ccd:
-            row_offset = v_end_ccd - idx + 1
-            header.length = row_offset * ((h_end + 1) * 2)
-            header.last_packet = True
-        # LOGGER.debug(f"{idx=}, {row_offset=}")
-        chunk = bytearray(data[idx:idx+row_offset, :])
-        chunk[0::2], chunk[1::2] = chunk[1::2], chunk[0::2]
-        packet_data = header.data_as_bytes() + chunk
-        # LOGGER.debug(f"{len(packet_data)=}, {len(chunk)=}")
-        yield SpaceWirePacket.create_packet(packet_data)
-
-    # reset the header for the overscan lines
-
-    header.packet_type = PacketType.OVERSCAN_DATA
-    header.last_packet = False
-    header.length = nr_rows_in_packet * ((h_end + 1) * 2)
-
-    v_end_overscan = min(MAX_OVERSCAN_LINE, v_end)
-
-    # reset the row_offset
-
-    row_offset = nr_rows_in_packet
-
-    for idx in range(MAX_CCD_LINE+1, v_end_overscan + 1, nr_rows_in_packet):
-        if idx + nr_rows_in_packet > v_end_overscan:
-            row_offset = v_end_overscan - idx + 1
-            header.length = row_offset * ((h_end + 1) * 2)
-            header.last_packet = True
-        LOGGER.debug(f"{idx=}, {row_offset=}")
-        chunk = bytearray(data[idx:idx+row_offset, :])
-        chunk[0::2], chunk[1::2] = chunk[1::2], chunk[0::2]
-        packet_data = header.data_as_bytes() + chunk
-        LOGGER.debug(f"{len(packet_data)=}, {len(chunk)=}")
-        yield SpaceWirePacket.create_packet(packet_data)
-
-def read_exposure(image_count):
-    """
-    Private method to extract an exposure from the PlatoSim HDF5 file.
-
-    This method uses an internal counter to read the next exposure from the
-    HDF5 file. When no exposures are available, an empty numpy array is returned.
-    """
-
-    platosim_filename = DATA_DIR / fee_settings.PLATOSIM_FILENAME
-    platosim_hdf5file = h5.get_file(platosim_filename, "r")
-
-    # Construct the image name that was used to store the image
-    image_name = "image{0:06d}".format(image_count)
-
-    # Copy the contents of the Image into a numpy array
-    try:
-        dataset = platosim_hdf5file["Images"][image_name]
-        image = np.zeros(dataset.shape, dataset.dtype)
-        LOGGER.info("image shape {} and type {}".format(dataset.shape, dataset.dtype))
-        dataset.read_direct(image)
-        return image
-    except KeyError as msg:
-        LOGGER.error("KeyError: {}".format(msg))
-        LOGGER.error("Cannot read exposure {} from the HDF5 file".format(image_name))
-        return np.array([])
-    except TypeError as msg:
-        LOGGER.error("TypeError: {}".format(msg))
-        LOGGER.error(
-            "Somehow the shape and/or the data type of the image are wrong in the HDF5 file."
-        )
-        return np.array([])
-
-
-def is_data_packet(packet):
-    return packet[0] == 0x50 and packet[1] == 0xF0
-
-
-def is_hk_data_packet(packet):
-    packet_type = int.from_bytes(packet[4:6], "big")
-
-    return (packet_type & 0b0011) == 2
-
-
-def is_data_data_packet(packet):
-    packet_type = int.from_bytes(packet[4:6], "big")
-
-    return (packet_type & 0b0011) == 0
-
-
-def is_overscan_data_packet(packet):
-    packet_type = int.from_bytes(packet[4:6], "big")
-
-    return (packet_type & 0b0011) == 1
-
-
-def is_last_packet(packet):
-
-    # Note that this bit is only set when in readout mode and when data is sent.
-    # It's currently not clear if the HK data packet will then also have the bit set (as there is
-    # only one HK packet) or if it is only the last data packet.
-
-    # bit 7 of the Data Packet Field: Type
-    packet_type = int.from_bytes(packet[4:6], "big")
-
-    LOGGER.log(5, f"Packet Type Field: 0b{beautify_binary(packet_type, size=16)}")
-
-    return packet_type & 0b10000000
-
-
-def get_mode(packet):
-    # bit [8:12] of the Data Packet Field: Type
-    packet_type = int.from_bytes(packet[4:6], "big")
-
-    mode = (packet_type & 0b111100000000) >> 8
-    return mode
-
-
-def get_data(packet) -> bytes:
-    """Return the data from the HK or Data packet.
-
-    Raises:
-        ValueError: if there is no data section in the packet (TODO: not yet implemented)
-    """
-    if not is_data_packet(packet):
-        LOGGER.debug(f"0x{packet.hex()}")
-        raise ValueError("Trying to read data from a packet that is not a data packet.")
-
-    length = int.from_bytes(packet[2:4], "big")
-    data = packet[10:]
-
-    LOGGER.debug(f"length field={length}, packet length={len(packet)}, data length={len(data)}")
-
-    return data
-
-
-@static_vars(timecode=0)
-def increment_timecode() -> int:
-    if increment_timecode.timecode == 0x3F:
-        increment_timecode.timecode = 0
-    else:
-        increment_timecode.timecode += 1
-
-    return increment_timecode.timecode
-
-
-def process_rmap_commands(esl_link: ESL, rmap_link: ESL_RMAP):
-    total_received = 0
-    packet = bytes()
-
-    terminator, rx_buffer = esl_read_packet(esl_link)
-    bytes_received = len(rx_buffer)
-
-    if is_terminator_code(terminator):
-        LOGGER.debug(
-            f"bytes received={bytes_received}, terminator={terminator} "
-            f"[{get_terminator_name(terminator)}]"
-        )
-    elif is_extension_code(terminator):
-        LOGGER.debug(
-            f"bytes received={bytes_received}, terminator={terminator} "
-            f"[{get_extension_name(terminator)}]"
-        )
-    else:
-        LOGGER.debug(f"bytes received={bytes_received}, terminator={terminator}")
-
-    # TODO:
-    #   When the link is  closed from the other end (dpusim) just one byte (b'\x08') is received.
-    #   So, we should try to restart the link...
-
-    if bytes_received == 1:
-        LOGGER.warning("Link was closed from the initiator side, terminating.")
-        return
-
-    # First check if we encountered any errors or shutdown,
-    # if True then break the main while loop and end the connection
-    #
-    # FIXME:
-    #   We need better handling of exceptional conditions here since the FEE Simulator can never
-    #   die.
-    #       - what shall we do when a shutdown is received?
-    #       - what shall we do when a timeout has occured?
-    #       - what shall we do with a buffer overflow? When can this happen?
-    #       - some errors are related to the virtual DSI, how do we solve those?
-
-    if bytes_received < 0:
-        error = esl_get_esl_error(esl_link)
-        if error == constants.ESL_ERROR_TIMEOUT:
-            LOGGER.debug("Received a timeout, continuing...")
-            return
-        # FIXME: We should handle all these cases in a simpler way
-        if error == constants.ESL_ERROR_RECEIVER_SHUTDOWN:
-            LOGGER.info("Shutdown detected.")
-            return
-        if error == constants.ESL_ERROR_BUFFER_OVERFLOW:
-            # FIXME: Can we recover from this situation?
-            LOGGER.error("Insufficient buffer to read full packet, bailing out.")
-            return
-        if error == constants.ESL_ERROR_RECFILE_WRITE:
-            LOGGER.error("Write error on record file, bailing out.")
-            return
-
-        LOGGER.error(
-            f"read_packet: returned error, "
-            f"ESL error = {constants.esl_error_codes[error]} [{error}]"
-        )
-        return
-
-    # When we receive an unknown terminator we just ignore, log the error and continue...
-
-    if terminator not in (
-        constants.ESL_EXTN,
-        constants.ESL_SPECIAL,
-        constants.ESL_PART_EOP_EEP,
-        constants.ESL_PART_EXTN,
-        constants.ESL_PART_SPECIAL,
-        constants.ESL_EEP,
-        constants.ESL_EOP,
-    ):
-        LOGGER.error(f"Unknown terminator [{terminator}] received.")
-        return
-
-    if terminator == constants.ESL_EXTN:
-        handle_extension_packet(rx_buffer, bytes_received)
-
-    if terminator == constants.ESL_SPECIAL:
-        handle_special_packet(rx_buffer, bytes_received)
-
-    if terminator in (
-        constants.ESL_PART_EOP_EEP,
-        constants.ESL_PART_EXTN,
-        constants.ESL_PART_SPECIAL,
-    ):
-        LOGGER.debug("Partial Data Packet received.")
-
-        total_received += bytes_received
-        packet += rx_buffer[:bytes_received]
-
-        # FIXME:
-        #   at this point we need to go for the next part of the packet
-        #   continue was used in the while loop before splitting off this code. We now do a
-        #   return, but we loose information on the total packet size etc.
-        return
-
-    if terminator == constants.ESL_EEP:
-        LOGGER.debug("Error End of Packet returned by DSI")
-
-    if terminator == constants.ESL_EOP:
-        LOGGER.debug("Normal End of Packet returned by DSI")
-
-        total_received += bytes_received
-        packet += rx_buffer[:bytes_received]
-
-        LOGGER.debug(f"total_received={total_received}")
-        LOGGER.debug("Pretty Print Received Packet:\n" + pretty_print_packet(packet))
-
-        # Deal with RMAP request packet
-        # FIXME: shouldn't this all be checked on packet instead of rx_buffer?
-
-        try:
-            # Run a number of checks on the received packet
-
-            check_target_logical_address(rmap_link, rx_buffer, dsi_settings.TARGET_LOGICAL_ADDRESS)
-            check_protocol_id(rx_buffer)
-            check_instruction(rx_buffer)
-            check_key(rmap_link, rx_buffer)
-            check_initiator_logical_address(rx_buffer, dsi_settings.INITIATOR_LOGICAL_ADDRESS)
-            check_header_crc(rx_buffer)
-
-            # Extract information from the packet that we need further on
-
-            tid = get_transaction_identifier(rx_buffer)
-            address = get_address(rx_buffer)
-            data_length = get_data_length(rx_buffer)
-        except CheckError as ce:
-            LOGGER.error(f"{ce.message}, status = {ce.status}")
-            status = ce.status
-            # FIXME:
-            #   Something is wrong with the packet here, do proper exception handling.
-            #   We are not anymore in the while loop after we have split off this code,
-            #   so continue doesn't work anymore...
-            # continue
-            raise ce
-
-        # Do something with the packet received
-
-        instruction_field = get_instruction_field(packet)
-
-        if is_command(instruction_field):
-
-            status = constants.RMAP_SUCCESS
-
-            if (
-                not dsi_settings.RMAP_BASE_ADDRESS
-                <= address
-                < (dsi_settings.RMAP_BASE_ADDRESS + dsi_settings.RMAP_MEMORY_SIZE)
-            ):
-                LOGGER.error(f"ERROR: Access outside of RMAP memory area, address=0x{address:010X}")
-                status = constants.RMAP_GENERAL_ERROR
-
-            # Handling an RMAP Write Command
-            #
-            # - Send a reply
-            # - Check Data CRC before writing
-            # - Write the data into memory
-
-            if is_write(instruction_field):
-
-                LOGGER.debug("RMAP write command received, sending reply packet...")
-
-                # FIXME: need some work here!!!!
-
-                # Create the target memory map and fill it with a pattern.
-                # This is just to simplify checking the correct write command.
-                # TODO: this should be replaced with the RegistryMap
-
-                rmap_target_memory = ctypes.create_string_buffer(
-                    bytes([x & 0xFF for x in range(dsi_settings.RMAP_MEMORY_SIZE)])
-                )
-
-                tx_buffer = ctypes.create_string_buffer(dsi_settings.TX_BUFFER_LENGTH)
-
-                tx_buffer[7] = rmap_crc_check(tx_buffer, 0, 7)
-
-                result = esl_write_packet(esl_link, tx_buffer, 8, constants.ESL_EOP)
-
-                esl_flush(esl_link)
-
-                # When no errors, then write the data into memory at the given position
-
-                if status == constants.RMAP_SUCCESS:
-
-                    # Check the Data CRC
-
-                    try:
-                        check_data_crc(rx_buffer)
-                    except CheckError as ce:
-                        LOGGER.error(f"{ce}, status = {ce.status}")
-                        raise ce
-
-                    # Write the data into the target memory map
-
-                    # FIXME: I do not understand why this is !!!!
-
-                    if is_increment(instruction_field):
-                        # change this code to work with RegisterMap
-                        # rmap_target_memory[address:address + data_length] = get_data(rx_buffer)
-                        pass
-                    else:
-                        # change this code to work with RegisterMap
-                        # Overwrite all the data into the same memory address, why?
-                        # for b in get_data(rx_buffer):
-                        #    rmap_target_memory[address] = b
-                        pass
-
-            # Handling an RMAP Read Command
-
-            else:
-                if status:
-                    data_length = 0
-
-                LOGGER.warning(
-                    "Commented out this code, work needs to be done on RMAP read command"
-                )
-                # data = self.register_map.get_data(address, data_length)
-                data = b"\x00\x01\x02\x03"
-
-                tx_buffer = create_rmap_read_reply_packet(
-                    rmap_link, instruction_field, tid, status, data, data_length
-                )
-
-                result = esl_write_packet(esl_link, tx_buffer, len(tx_buffer), constants.ESL_EOP)
-
-                result = esl_flush(
-                    esl_link
-                )  # FIXME: This will mask previous ESL_error if there was one
-
-                if result:
-                    raise ESLError(
-                        f"Could not write the packet, "
-                        f"ESL error code = {constants.esl_error_codes[esl_link.contents.ESL_error]} "
-                        f"[{esl_link.contents.ESL_error}]"
-                    )
-
-        else:
-            LOGGER.warning("The packet is not an RMAP read/write command.")
-
-        total_received = 0
-        packet = bytes()
-
-    LOGGER.debug("Going for the next SpaceWire packet...")
-
-
-if __name__ == "__main__":
-
-    import numpy as np
-    import matplotlib.pyplot as plt
-    from egse.fee import n_fee_mode
-
-    fig, (ax1, ax2, ax3) = plt.subplots(3)
-
-    header = DataPacketHeader()
-
-    timecode = 0
-    ccd_side = 0
-    ccd_id = 2
-
-    data_left = create_pattern_data(timecode, ccd_id, ccd_side)
-
-    print(f"{data_left[0, 0]=:016b}, {data_left[0, 1]=:016b}, {data_left[0, 2278]=:016b}, {data_left[0, 2279]=:016b}")
-    print(f"{data_left[1, 0]=:016b}, {data_left[1, 1]=:016b}, {data_left[1, 2278]=:016b}, {data_left[1, 2279]=:016b}")
-    print(f"{data_left[4538, 0]=:016b}, {data_left[4538, 1]=:016b}, {data_left[4538, 2278]=:016b}, {data_left[4538, 2279]=:016b}")
-    print(f"{data_left[4539, 0]=:016b}, {data_left[4539, 1]=:016b}, {data_left[4539, 2278]=:016b}, {data_left[4539, 2279]=:016b}")
-
-    v_start = 0
-    v_end = 4509  # remember that v_end is inclusive
-
-    data_left = create_pattern_data(62, 0, 0)
-    data_right = create_pattern_data(62, 0, 1)
-
-    data = np.concatenate((data_left, data_right), axis=1)
-    data = data[v_start:v_end+1, :]
-
-    LOGGER.info(f"{data.shape=}")
-
-    ax1.imshow(data, origin='lower')
-
-    # now generate the packet for the first 10 lines and glue the data together again to
-    # be displayed
-
-    packet_type = header.type_as_object
-    packet_type.ccd_side = ccd_side
-    packet_type.ccd_number = ccd_id
-    packet_type.last_packet = False
-    packet_type.frame_number = 2
-    packet_type.mode = n_fee_mode.FULL_IMAGE_PATTERN_MODE
-    header.type = packet_type
-
-    nr_lines = 0
-    image_left = np.empty((0,), dtype=np.uint16)
-
-    with Timer("Generate left side data packets") as timer:
-        for packet in generate_data_packets(data_left, header, v_start, v_end):
-            image_left = np.concatenate((image_left, packet.data_as_ndarray))
-            nr_lines += len(packet.data_as_ndarray) // 2295
-
-    image_left = image_left.reshape(nr_lines, 2295)
-    LOGGER.info(f"{image_left.shape = }")
-
-    nr_lines = 0
-    image_right = np.empty((0,), dtype=np.uint16)
-
-    with Timer("Generate right side datapackets"):
-        for packet in generate_data_packets(data_right, header, v_start, v_end):
-            image_right = np.concatenate((image_right, packet.data_as_ndarray))
-            nr_lines += len(packet.data_as_ndarray) // 2295
-
-    image_right = image_right.reshape(nr_lines, 2295)
-    LOGGER.info(f"{image_right.shape = }")
-
-    image = np.concatenate((image_left, image_right), axis=1)
-
-    ax2.imshow(image, origin='lower')
-
-    x = data - image
-
-    print(f"{np.count_nonzero(x)=}")
-
-    ax3.imshow(x, origin='lower')
-    plt.show()