ObjectNat 1.2.0__py3-none-any.whl → 1.2.1__py3-none-any.whl

objectnat/methods/noise/noise_reduce.py

@@ -1,155 +1,155 @@
-import numpy as np
-from scipy.optimize import fsolve
-
-from objectnat import config
-
-from .noise_init_data import air_resist_ratio
-
-logger = config.logger
-
-
-def get_air_resist_ratio(temp, freq, check_temp_freq=False):
-    if check_temp_freq:
-        if temp > max(air_resist_ratio.columns) or temp < min(air_resist_ratio.columns):
-            logger.warning(
-                f"The specified temperature of {temp}°C is outside the tabulated data range. "
-                f"The air resistance coefficient for these values may be inaccurate. "
-                f"Recommended temperature range: {min(air_resist_ratio.columns)}°C "
-                f"to {max(air_resist_ratio.columns)}°C."
-            )
-
-        if freq > max(air_resist_ratio.index) or freq < min(air_resist_ratio.index):
-            logger.warning(
-                f"The specified geometric mean frequency of {freq} Hz is outside the tabulated data range."
-                f" The air resistance coefficient for these values may be inaccurate."
-                f" Recommended frequency range: {min(air_resist_ratio.index)} Hz to {max(air_resist_ratio.index)} Hz."
-            )
-
-    def get_nearest_values(array, value):
-        sorted_array = sorted(array)
-        if value in sorted_array:
-            return [value]
-        if value > max(sorted_array):
-            return [sorted_array[-1]]
-        if value < min(sorted_array):
-            return [sorted_array[0]]
-
-        for i, val in enumerate(sorted_array):
-            if value < val:
-                return sorted_array[max(i - 1, 0)], sorted_array[i]
-        return sorted_array[-2], sorted_array[-1]
-
-    nearest_temp = get_nearest_values(air_resist_ratio.columns, temp)
-    nearest_freq = get_nearest_values(air_resist_ratio.index, freq)
-
-    if len(nearest_temp) == 1 and len(nearest_freq) == 1:
-        return air_resist_ratio.loc[nearest_freq[0], nearest_temp[0]]
-
-    if len(nearest_temp) == 2 and len(nearest_freq) == 2:
-        freq1, freq2 = nearest_freq
-        temp1, temp2 = nearest_temp
-
-        coef_temp1_freq1 = air_resist_ratio.loc[freq1, temp1]
-        coef_temp1_freq2 = air_resist_ratio.loc[freq2, temp1]
-        coef_temp2_freq1 = air_resist_ratio.loc[freq1, temp2]
-        coef_temp2_freq2 = air_resist_ratio.loc[freq2, temp2]
-
-        weight_temp1 = (temp2 - temp) / (temp2 - temp1)
-        weight_temp2 = (temp - temp1) / (temp2 - temp1)
-        weight_freq1 = (freq2 - freq) / (freq2 - freq1)
-        weight_freq2 = (freq - freq1) / (freq2 - freq1)
-
-        coef_freq1 = coef_temp1_freq1 * weight_temp1 + coef_temp2_freq1 * weight_temp2
-        coef_freq2 = coef_temp1_freq2 * weight_temp1 + coef_temp2_freq2 * weight_temp2
-
-        final_coef = coef_freq1 * weight_freq1 + coef_freq2 * weight_freq2
-
-        return final_coef
-
-    if len(nearest_temp) == 2 and len(nearest_freq) == 1:
-        temp1, temp2 = nearest_temp
-        freq1 = nearest_freq[0]
-
-        coef_temp1 = air_resist_ratio.loc[freq1, temp1]
-        coef_temp2 = air_resist_ratio.loc[freq1, temp2]
-
-        weight_temp1 = (temp2 - temp) / (temp2 - temp1)
-        weight_temp2 = (temp - temp1) / (temp2 - temp1)
-
-        return coef_temp1 * weight_temp1 + coef_temp2 * weight_temp2
-
-    if len(nearest_temp) == 1 and len(nearest_freq) == 2:
-        temp1 = nearest_temp[0]
-        freq1, freq2 = nearest_freq
-
-        coef_freq1 = air_resist_ratio.loc[freq1, temp1]
-        coef_freq2 = air_resist_ratio.loc[freq2, temp1]
-
-        weight_freq1 = (freq2 - freq) / (freq2 - freq1)
-        weight_freq2 = (freq - freq1) / (freq2 - freq1)
-
-        return coef_freq1 * weight_freq1 + coef_freq2 * weight_freq2
-
-
-def dist_to_target_db(
-    init_noise_db, target_noise_db, geometric_mean_freq_hz, air_temperature, return_desc=False, check_temp_freq=False
-) -> float | str:
-    """
-    Calculates the distance required for a sound wave to decay from an initial noise level to a target noise level,
-    based on the geometric mean frequency of the sound and the air temperature. Optionally, can return a description
-    of the sound propagation behavior.
-
-    Args:
-        init_noise_db (float): The initial noise level of the source in decibels (dB). This is the starting sound
-            intensity.
-        target_noise_db (float): The target noise level in decibels (dB), representing the level to which the sound
-            decays over distance.
-        geometric_mean_freq_hz (float): The geometric mean frequency of the sound (in Hz). This frequency influences
-            the attenuation of sound over distance. Higher frequencies decay faster than lower ones.
-        air_temperature (float): The temperature of the air in degrees Celsius. This influences the air's resistance
-            to sound propagation.
-        return_desc (bool, optional): If set to `True`, the function will return a description of the sound decay
-            process instead of the calculated distance.
-        check_temp_freq (bool, optional): If `True`, the function will check whether the temperature and frequency
-            are within valid ranges.
-
-    Returns:
-        float or str: If `return_desc` is `False`, the function returns the distance (in meters) over which the sound
-        decays from `init_noise_db` to `target_noise_db`. If `return_desc` is `True`, a descriptive string is returned
-        explaining the calculation and the conditions.
-    """
-
-    def equation(r):
-        return l - l_ist + 20 * np.log10(r) + k * r
-
-    l_ist = init_noise_db
-    l = target_noise_db
-    k = get_air_resist_ratio(air_temperature, geometric_mean_freq_hz, check_temp_freq)
-    initial_guess = 1
-    r_solution = fsolve(equation, initial_guess)
-    if return_desc:
-        string = (
-            f"Noise level of {init_noise_db} dB "
-            f"with a geometric mean frequency of {geometric_mean_freq_hz} Hz "
-            f"at an air temperature of {air_temperature}°C decays to {target_noise_db} dB "
-            f"over a distance of {r_solution[0]} meters. Air resistance coefficient: {k}."
-        )
-        return string
-    return r_solution[0]
-
-
-def green_noise_reduce_db(geometric_mean_freq_hz, r_tree) -> float:
-    """
-    Calculates the amount of noise reduction (in dB) provided by vegetation of a given thickness at a specified
-    geometric mean frequency. The function models the reduction based on the interaction of the sound with trees or
-    vegetation.
-
-    Args:
-        geometric_mean_freq_hz (float): The geometric mean frequency of the sound (in Hz).
-        r_tree (float): The thickness or density of the vegetation (in meters).
-
-    Returns:
-        float: The noise reduction (in dB) achieved by the vegetation. This value indicates how much quieter the sound
-        will be after passing through or interacting with the vegetation of the specified thickness.
-    """
-    return round(0.08 * r_tree * ((geometric_mean_freq_hz ** (1 / 3)) / 8), 1)
+import numpy as np
+from scipy.optimize import fsolve
+
+from objectnat import config
+
+from .noise_init_data import air_resist_ratio
+
+logger = config.logger
+
+
+def get_air_resist_ratio(temp, freq, check_temp_freq=False):
+    if check_temp_freq:
+        if temp > max(air_resist_ratio.columns) or temp < min(air_resist_ratio.columns):
+            logger.warning(
+                f"The specified temperature of {temp}°C is outside the tabulated data range. "
+                f"The air resistance coefficient for these values may be inaccurate. "
+                f"Recommended temperature range: {min(air_resist_ratio.columns)}°C "
+                f"to {max(air_resist_ratio.columns)}°C."
+            )
+
+        if freq > max(air_resist_ratio.index) or freq < min(air_resist_ratio.index):
+            logger.warning(
+                f"The specified geometric mean frequency of {freq} Hz is outside the tabulated data range."
+                f" The air resistance coefficient for these values may be inaccurate."
+                f" Recommended frequency range: {min(air_resist_ratio.index)} Hz to {max(air_resist_ratio.index)} Hz."
+            )
+
+    def get_nearest_values(array, value):
+        sorted_array = sorted(array)
+        if value in sorted_array:
+            return [value]
+        if value > max(sorted_array):
+            return [sorted_array[-1]]
+        if value < min(sorted_array):
+            return [sorted_array[0]]
+
+        for i, val in enumerate(sorted_array):
+            if value < val:
+                return sorted_array[max(i - 1, 0)], sorted_array[i]
+        return sorted_array[-2], sorted_array[-1]
+
+    nearest_temp = get_nearest_values(air_resist_ratio.columns, temp)
+    nearest_freq = get_nearest_values(air_resist_ratio.index, freq)
+
+    if len(nearest_temp) == 1 and len(nearest_freq) == 1:
+        return air_resist_ratio.loc[nearest_freq[0], nearest_temp[0]]
+
+    if len(nearest_temp) == 2 and len(nearest_freq) == 2:
+        freq1, freq2 = nearest_freq
+        temp1, temp2 = nearest_temp
+
+        coef_temp1_freq1 = air_resist_ratio.loc[freq1, temp1]
+        coef_temp1_freq2 = air_resist_ratio.loc[freq2, temp1]
+        coef_temp2_freq1 = air_resist_ratio.loc[freq1, temp2]
+        coef_temp2_freq2 = air_resist_ratio.loc[freq2, temp2]
+
+        weight_temp1 = (temp2 - temp) / (temp2 - temp1)
+        weight_temp2 = (temp - temp1) / (temp2 - temp1)
+        weight_freq1 = (freq2 - freq) / (freq2 - freq1)
+        weight_freq2 = (freq - freq1) / (freq2 - freq1)
+
+        coef_freq1 = coef_temp1_freq1 * weight_temp1 + coef_temp2_freq1 * weight_temp2
+        coef_freq2 = coef_temp1_freq2 * weight_temp1 + coef_temp2_freq2 * weight_temp2
+
+        final_coef = coef_freq1 * weight_freq1 + coef_freq2 * weight_freq2
+
+        return final_coef
+
+    if len(nearest_temp) == 2 and len(nearest_freq) == 1:
+        temp1, temp2 = nearest_temp
+        freq1 = nearest_freq[0]
+
+        coef_temp1 = air_resist_ratio.loc[freq1, temp1]
+        coef_temp2 = air_resist_ratio.loc[freq1, temp2]
+
+        weight_temp1 = (temp2 - temp) / (temp2 - temp1)
+        weight_temp2 = (temp - temp1) / (temp2 - temp1)
+
+        return coef_temp1 * weight_temp1 + coef_temp2 * weight_temp2
+
+    if len(nearest_temp) == 1 and len(nearest_freq) == 2:
+        temp1 = nearest_temp[0]
+        freq1, freq2 = nearest_freq
+
+        coef_freq1 = air_resist_ratio.loc[freq1, temp1]
+        coef_freq2 = air_resist_ratio.loc[freq2, temp1]
+
+        weight_freq1 = (freq2 - freq) / (freq2 - freq1)
+        weight_freq2 = (freq - freq1) / (freq2 - freq1)
+
+        return coef_freq1 * weight_freq1 + coef_freq2 * weight_freq2
+
+
+def dist_to_target_db(
+    init_noise_db, target_noise_db, geometric_mean_freq_hz, air_temperature, return_desc=False, check_temp_freq=False
+) -> float | str:
+    """
+    Calculates the distance required for a sound wave to decay from an initial noise level to a target noise level,
+    based on the geometric mean frequency of the sound and the air temperature. Optionally, can return a description
+    of the sound propagation behavior.
+
+    Args:
+        init_noise_db (float): The initial noise level of the source in decibels (dB). This is the starting sound
+            intensity.
+        target_noise_db (float): The target noise level in decibels (dB), representing the level to which the sound
+            decays over distance.
+        geometric_mean_freq_hz (float): The geometric mean frequency of the sound (in Hz). This frequency influences
+            the attenuation of sound over distance. Higher frequencies decay faster than lower ones.
+        air_temperature (float): The temperature of the air in degrees Celsius. This influences the air's resistance
+            to sound propagation.
+        return_desc (bool, optional): If set to `True`, the function will return a description of the sound decay
+            process instead of the calculated distance.
+        check_temp_freq (bool, optional): If `True`, the function will check whether the temperature and frequency
+            are within valid ranges.
+
+    Returns:
+        float or str: If `return_desc` is `False`, the function returns the distance (in meters) over which the sound
+        decays from `init_noise_db` to `target_noise_db`. If `return_desc` is `True`, a descriptive string is returned
+        explaining the calculation and the conditions.
+    """
+
+    def equation(r):
+        return l - l_ist + 20 * np.log10(r) + k * r
+
+    l_ist = init_noise_db
+    l = target_noise_db
+    k = get_air_resist_ratio(air_temperature, geometric_mean_freq_hz, check_temp_freq)
+    initial_guess = 1
+    r_solution = fsolve(equation, initial_guess)
+    if return_desc:
+        string = (
+            f"Noise level of {init_noise_db} dB "
+            f"with a geometric mean frequency of {geometric_mean_freq_hz} Hz "
+            f"at an air temperature of {air_temperature}°C decays to {target_noise_db} dB "
+            f"over a distance of {r_solution[0]} meters. Air resistance coefficient: {k}."
+        )
+        return string
+    return r_solution[0]
+
+
+def green_noise_reduce_db(geometric_mean_freq_hz, r_tree) -> float:
+    """
+    Calculates the amount of noise reduction (in dB) provided by vegetation of a given thickness at a specified
+    geometric mean frequency. The function models the reduction based on the interaction of the sound with trees or
+    vegetation.
+
+    Args:
+        geometric_mean_freq_hz (float): The geometric mean frequency of the sound (in Hz).
+        r_tree (float): The thickness or density of the vegetation (in meters).
+
+    Returns:
+        float: The noise reduction (in dB) achieved by the vegetation. This value indicates how much quieter the sound
+        will be after passing through or interacting with the vegetation of the specified thickness.
+    """
+    return round(0.08 * r_tree * ((geometric_mean_freq_hz ** (1 / 3)) / 8), 1)