ysk-server-shared 1.0.0 → 1.1.9

package/locales/zh-CN/protection.json

@@ -30,7 +30,9 @@
   "note": {
     "notApplied": "未套用到系统（需 root + YSK_EXECUTE=1）— 已记到管理设置",
     "nginxWritten": "已写入 Nginx 限速管理檔",
-    "f2bWritten": "已写入 fail2ban 管理設定"
+    "f2bWritten": "已写入 fail2ban 管理設定",
+    "hintDropped": "Internal protection hint omitted",
+    "nginxLimits": "Will write Nginx rate-limit snippet"
   },
   "rel": {
     "justNow": "刚刚",
@@ -344,5 +346,67 @@
   "plusRegion": "+ 省 {{v}}",
   "plusCity": "+ 城市 {{v}}",
   "lastTickPrefix": "· 上次 {{t}}",
-  "nextTickPrefix": "· 下轮 {{t}}"
+  "nextTickPrefix": "· 下轮 {{t}}",
+  "stackApply": "套用防護組合（UFW、fail2ban、建議檔）",
+  "stackApplyDone": "已要求套用防護組合",
+  "stackApplyHint": "會啟用 UFW 並套用 fail2ban 與建議防護檔。遠端面板請先確認不會把自己鎖在外面。",
+  "cannotBanSelf": "不可封锁 {{ip}} — 这是本机、你的登录 IP 或 ignoreip",
+  "selfIp": "本主机",
+  "selfHostIp": "主机IP",
+  "selfLoginIp": "您的登录IP",
+  "showZeroScore": "显示 0 分",
+  "hideZeroScore": "隐藏 0 分",
+  "freshnessNa": "不适用",
+  "geoDraftOnly": "政策未启用 — 保存只写草稿，Nginx 不会执行，直到你勾选启用。",
+  "selectAllCountriesWarn": "封锁名单模式下全选全部国家？这可能把本机与你的登录所在地一并封锁。",
+  "badgeRecommendPreset": "以目前威胁水平，建议改用更强预设",
+  "badgeAutomationOn": "自动化已开启",
+  "badgeBanCount": "目前封锁数",
+  "badgeGeoOn": "Geo 准入政策已启用",
+  "badgeGeoNotReady": "GeoIP 数据库尚未就绪",
+  "badgeIntelSignals": "目前计分的信号数",
+  "signalActive": "运行中",
+  "signalInactive": "未启用",
+  "signalJails": "{{n}} 个 jail",
+  "dbReadyHint": "已有 MMDB 文件",
+  "dbNotReadyHint": "请先下载 GeoIP 数据库",
+  "staleHint": "上次成功更新是否已超过 7 日",
+  "statSuspects": "可疑IP",
+  "scoreBasisHint": "威胁评分使用防火墙、fail2ban 禁止量和请求率信号——与英特尔嫌疑人列表的计数不同。",
+  "geoNeedDb": "GeoIP 数据库丢失 - 首先更新 MMDB 文件",
+  "colHits": "次数",
+  "col429": "429",
+  "topIpsTitle": "热点 IP",
+  "hitsCount": "{{n}} 次",
+  "sampleWindowHint": "计数来自当前 access 与 auth 样本窗口，不是完整日志文件。",
+  "statSuspectsSplit": "{{actionable}} actionable / {{total}} listed",
+  "suspectActionableCount": "Actionable IPs {{count}}",
+  "uaNeedZones": "Set a Cloudflare zone first",
+  "banConfirmTitle": "Ban {{ip}}?",
+  "banConfirmDesc": "This IP will be blocked on the host. Confirm it is not a current panel or session address.",
+  "ufwOff": "UFW (off)",
+  "ufwOffHint": "UFW is not active — fail2ban is the usable target.",
+  "whitelistSyncHint": "{{n}} panel entries · fail2ban ignoreip sync: {{sync}}",
+  "whitelistSyncOn": "on",
+  "whitelistSyncOff": "off (lists may differ)",
+  "draftBadge": "Draft",
+  "banIsSelf": "This IP matches the current panel source or this host.",
+  "banNotSelf": "This IP is not the current panel source.",
+  "geoSourceLocal": "Local GeoIP library (sapics + DB-IP)",
+  "nginxPreviewHint": "Nginx snippet this preset would write (preview only):",
+  "modeValue": {
+    "normal": "Normal",
+    "degraded": "Degraded",
+    "ddos-protection": "DDoS protection",
+    "offline": "Offline"
+  },
+  "wlRemovedUndo": "Removed {{ip}} from the allow list. Undo within 5 seconds.",
+  "undo": "Undo",
+  "banSelectedConfirmTitle": "Ban {{count}} selected IPs?",
+  "banSelectedConfirmDesc": "These addresses will be blocked on the host: {{ips}}",
+  "freshnessMissing": "No database",
+  "freshnessStale": "Stale",
+  "freshnessFresh": "Current",
+  "banConfirmMethod": "Method: {{method}}",
+  "banConfirmUntilUnban": "Stays banned until you unban it (or fail2ban expiry)."
 }

package/locales/zh-CN/publicFiles.json

@@ -28,5 +28,22 @@
   "diskRoot": "磁盘根目录",
   "filesInRoot": "条目数",
   "managedConf": "管理 conf",
-  "systemConf": "系统 conf.d"
+  "systemConf": "系统 conf.d",
+  "notes": {
+    "noManagedConf": "尚无托管 Nginx 配置 — 单击“应用”",
+    "notSynced": "托管conf存在，但不在/etc/nginx/conf.d下——使用YSK_EXECUTE再次以root身份申请"
+  },
+  "autoindex": "目录列表（autoindex）",
+  "liveSystemConf": "现行系统配置：{{path}}",
+  "publicRootNote": "公开根目录：{{path}}",
+  "applyConfirmTitle": "套用公开文件站点？",
+  "applyConfirmDesc": "写入 Nginx server_name {{name}} 并重载 Nginx。",
+  "serverNameMismatch": "现行配置为 {{live}}；表单为 {{draft}}。套用后会覆盖。",
+  "executeFlag": "Execute",
+  "asRoot": "Root",
+  "statusDraft": "Draft / not applied",
+  "liveName": "Live name",
+  "draftName": "Draft name",
+  "draftUnapplied": "This draft is not applied. Nginx still serves the live name.",
+  "discardDraft": "Discard draft"
 }

package/locales/zh-CN/rbac.json

@@ -80,7 +80,13 @@
     "auditExport": "审计导出",
     "securityApiKeysAdmin": "API 密钥管理",
     "networkBrowse": "主機代瀏覽",
-    "networkVnc": "VNC 远程桌面管理"
+    "networkVnc": "VNC 远程桌面管理",
+    "validatorsRead": "验证者节点（读取）",
+    "validatorsManage": "验证者节点管理",
+    "validatorsWipe": "验证者节点清空数据",
+    "dockerRead": "Docker（读取）",
+    "dockerManage": "Docker 管理",
+    "dockerWipe": "Docker 删除／清理"
   },
   "aboutRoles": "角色说明（出厂默认）",
   "aboutRolesBody": "角色决定默认权限；用户可再覆盖个别能力。",
@@ -96,5 +102,12 @@
   "capabilitiesHint": "勾选此角色可用的功能。橙点表示与系统默认不同。",
   "enabledCount": "已开 {{enabled}}／{{total}}",
   "bandAboveMax": "高于最高等级",
-  "dirtyHint": "已自定义（与系统默认不同）"
+  "dirtyHint": "已自定义（与系统默认不同）",
+  "unsaved": "未储存",
+  "unsavedHint": "此角色有未储存变更",
+  "nothingToSave": "没有要储存的变更",
+  "saveRole": "储存「{{role}}」政策",
+  "discardTitle": "放弃未储存政策？",
+  "discardDesc": "转到另一个角色会丢弃未储存的权限变更。",
+  "roleUnavailable": "Not available for this role"
 }

package/locales/zh-CN/readiness.json

@@ -4,7 +4,7 @@
     "security": "权限与安全",
     "binaries": "系统软件",
     "hosting": "运行环境",
-    "dns": "DNS",
+    "dns": "域名系统",
     "email": "邮件",
     "isolation": "项目隔离",
     "ops": "运维"
@@ -107,5 +107,36 @@
   "fixNow": "立即修复",
   "fixFailed": "修复失败",
   "fixDone": "已修复 dataDir 权限（chmod 750）",
-  "fixDoneWebUi": "已构建／安装 Web 界面"
+  "fixDoneWebUi": "已构建／安装 Web 界面",
+  "rootLabel": "超级用户",
+  "exportStarted": "正在下載 {{name}}",
+  "blockersHint": "「阻挡」是「缺少」中的关键项，不是额外检查。",
+  "techDetails": "技术细节",
+  "missingOwner": "未分配面板所有者（包配额归属）",
+  "notOsProvisioned": "操作系统用户/主目录尚未配置",
+  "ondrejNone": "未检测到 ondrej Launchpad PHP 源",
+  "ondrejFound": "发现旧版 ondrej/php 源与packages.sury.org 冲突：{{paths}}",
+  "ondrejTitle": "PHP apt源（ondrej残差）",
+  "systemctlActive": "服务正在运行",
+  "systemctlStatus": "服务状态：{{status}}",
+  "binInPath": "路径中的 {{bin}}",
+  "leftoverApache": "Apache 剩余的默认站点",
+  "leftoverVsftpd": "vsftpd 单元失败",
+  "leftoverCli": "过时的剩余 CLI",
+  "leftoverNginx": "Nginx 包罗万象缺失",
+  "leftoverDovecot": "Dovecot TLS 指出缺少证书",
+  "leftoverOther": "主机剩余物",
+  "leftoverApply": "剩余的适用",
+  "isolationOwnerDegrades": "缺少owner_user_id会影响程序包配额属性 - 状态已降级，未就绪。",
+  "totalChecks": "All checks",
+  "totalChecksHint": "Ready + degraded + missing = this total. Blockers are the critical missing subset.",
+  "requireAdminTotp": "require admin 2FA policy",
+  "listenBind": "listen address",
+  "item": {
+    "admin2fa": "Admin two-factor"
+  },
+  "dataDirPerms": "panel data-directory permissions",
+  "mode750": "mode 750",
+  "gateBlocked": "Not passed · {{n}} missing",
+  "isolationPendingOs": "Same as project status: OS user pending. Open Isolation to provision the system user and home."
 }

package/locales/zh-CN/redis.json

@@ -64,5 +64,28 @@
   "pickKey": "从左側选擇一个鍵，即可查看内容。",
   "ttlPrefix": "过期：{{ttl}}",
   "writeLiveHint": "此操作直接写入执行中的 Redis，无法从面板一鍵还原。",
-  "refPath": "参考：{{path}}"
+  "refPath": "参考：{{path}}",
+  "dbEmptyMark": " · 空",
+  "noRequirepass": "保护模式已开，但 requirepass 为空或未读到 — 实际无密码。",
+  "setRequirepass": "设定密码",
+  "rdbOnlyLossHint": "AOF 关闭且 RDB 开启。重启或崩溃可能丢失最近写入。",
+  "dirDataContainer": "/data (container)",
+  "dirHostDefault": "/var/lib/redis",
+  "dirDefaultInstance": "/var/lib/redis/default",
+  "dirDataWarn": "/data is usually a container path; this panel cannot confirm it exists.",
+  "saveOff": "禁用快照（不推荐）",
+  "saveOffWarn": "空保存字符串会关闭 RDB 快照。如果 AOF 也关闭，则崩溃可能会丢失所有数据。",
+  "dirMoveWarn": "更改目录不会移动 dump.rdb / AOF。下次启动将按原样使用新路径。",
+  "passwordUnset": "未在服务上设置",
+  "passwordSetHidden": "设置（未显示）",
+  "scanHint": "Uses SCAN, not KEYS. Returns at most {{n}} keys — avoid * on huge databases.",
+  "scanCapped": "Showing the first {{n}} matches.",
+  "dbOptionKeys": "DB {{i}} · {{n}} keys",
+  "dbOptionEmpty": "DB {{i}} · empty",
+  "insecureShort": "No password",
+  "generateRequirepass": "Generate and apply password",
+  "generateRequirepassTitle": "Generate a Redis password?",
+  "generateRequirepassDesc": "Writes requirepass and restarts Redis. The password is shown once. Host change needs EXECUTE.",
+  "generateRequirepassDone": "Redis password applied",
+  "generatedOnce": "Generated password (shown once): {{password}}"
 }

package/locales/zh-CN/runtime.json

@@ -356,7 +356,7 @@
       "errorLogDefault": "系统默认（空）",
       "errorLogPhp": "/var/log/php/error.log",
       "errorLogFpm": "FPM 日志路径",
-      "errorLogSyslog": "syslog"
+      "errorLogSyslog": "系统日志"
     },
     "disableFn": {
       "groups": {
@@ -451,7 +451,29 @@
     "projectsCount": "YSK 项目数",
     "noProjects": "没有项目",
     "noProjectsDesc": "面板没有 node/bun 项目，或未建 OS 用户。",
-    "pm2OnlyDesc": "仅显示 panel 用户用 PM2 启动的进程。systemd 部署见上方项目表。"
+    "pm2OnlyDesc": "仅显示 panel 用户用 PM2 启动的进程。systemd 部署见上方项目表。",
+    "startupTitle": "开机启动",
+    "startupDesc": "注册 PM2，以便进程在重新启动后恢复。",
+    "systemdActionsHint": "systemd 操作需要 root 和 YSK_EXECUTE。",
+    "startupOk": "已登记开机启动。{{notes}}",
+    "startupFail": "无法登记开机启动。{{notes}}",
+    "actionOk": "{{action}} {{name}} — {{notes}}",
+    "actionFail": "无法 {{action}} {{name}}。{{notes}}",
+    "startupReady": "就绪",
+    "startupReadyYes": "是",
+    "startupReadyNo": "否",
+    "startupUnit": "单元",
+    "startupDump": "转储",
+    "startupInstall": "安装开机启动",
+    "startupSave": "保存进程列表",
+    "actRestart": "重启",
+    "actStop": "停止",
+    "actReload": "重新加载",
+    "pm2ActionsHint": "PM2 操作只作用于面板用户的进程列表。",
+    "noteUnparsed": "PM2 list could not be parsed (empty or unexpected output).",
+    "notePanelUserOnly": "PM2 list is for the panel process user only.",
+    "noteProjectUnits": "{{n}} YSK project unit(s) listed",
+    "glossary": "PM2 = process manager; SSE = live stream."
   },
   "recordedInstalled": "记录已装 {{v}}",
   "remoteSourceSuffix": "（{{source}}）",
@@ -505,5 +527,30 @@
   "path": "路径",
   "fullVersion": "完整版本",
   "useListForDefaults": "要改主机／面板默认或移除此版本，请用上方列表。",
-  "alreadyHostDefaultShort": "主机默认"
+  "alreadyHostDefaultShort": "主机默认",
+  "managedPathMissingTitle": "受管 {{name}} 路徑未就緒",
+  "managedPathMissing": "版本 {{version}} 的 YSK 受管 {{name}} 尚未就緒。請重新探測或重新安裝。",
+  "installRecordedCta": "前往软件分页安装 {{v}}",
+  "targetMissing": "目标版本未安装",
+  "targetMissingHint": "目标 {{version}} 不在本机。请改绑已安装的版本，或先安装此版本。",
+  "needsInstall": "需安装",
+  "needsInstallHint": "此版本未在本机。请先安装，或改选已安装的版本。",
+  "unitBytes": "字节",
+  "headerSizeKb": "{{n}} KB",
+  "phpIniChipEmpty": "未载入 — 请打开 php.ini 分页",
+  "phpFpmService": "PHP-FPM",
+  "phpFpmServiceDesc": "启动、停止、重载或重启 PHP-FPM 单元",
+  "rustupDefaultMissingTitle": "未设 rustup 默认工具链",
+  "rustupDefaultMissing": "rustup 未设默认工具链。请到「软件」分页设为 stable。",
+  "rustupDefaultMissingShort": "没有默认工具链",
+  "rustupSetDefaultHint": "设置默认工具链",
+  "uninstalledCountHint": "{{n}} 个版本未在本机",
+  "applyPhpVhostTitle": "需要确认 - 写入池/虚拟主机文件",
+  "applyPhpVhostDesc": "将写入 {{pool}} 池和 {{domain}} 虚拟主机。重新加载服务：{{reload}}。",
+  "binaryPath": "二进制路径",
+  "installedLabel": "Installed",
+  "installedHint": "Host probe result — not the control-plane record",
+  "targetHint": "Version this page will install or pin",
+  "rebuildFromHost": "Rebuild record from host",
+  "rebuiltFromHost": "Record refreshed from host probe"
 }

package/locales/zh-CN/search.json

@@ -10,7 +10,7 @@
     "email": "邮件",
     "mailbox": "邮箱",
     "ssl": "SSL",
-    "dns": "DNS",
+    "dns": "域名系统",
     "nginx": "Nginx",
     "share": "分享",
     "ftp": "FTP",
@@ -20,5 +20,9 @@
     "cron": "Cron",
     "user": "用户",
     "other": "其他"
+  },
+  "alias": {
+    "ssl": "证书 cert certificate certs",
+    "projects": "项目 专案 project sites"
   }
 }

package/locales/zh-CN/security.json

@@ -19,7 +19,7 @@
   "tabApiKeys": "API 密钥",
   "tabSsh": "SSH",
   "tabApprovals": "审批",
-  "tabAllowlist": "允许清单",
+  "tabAllowlist": "工具权限",
   "apiTokenOnce": "API token（只显示一次）：",
   "copiedToken": "已复制 token",
   "totpTitle": "双重验证 (TOTP)",
@@ -103,8 +103,8 @@
   "revokeAllDevices": "撤销全部设备",
   "revokedAllDevices": "已撤销全部信任设备",
   "export2faBackup": "导出 2FA 加密备份",
-  "fail2banSnippetMsg": "Fail2ban 片段：{{written}} — {{notes}}",
-  "generateFail2ban": "生成 Fail2ban 片段",
+  "fail2banSnippetMsg": "fail2ban 片段：{{written}} — {{notes}}",
+  "generatefail2ban": "生成 fail2ban 片段",
   "adminPolicyTitle": "管理员 2FA 政策",
   "adminPolicyDesc": "",
   "requireAdmin2fa": "要求管理员启用 2FA",
@@ -124,8 +124,9 @@
   "apiKeysEmpty": "尚未有 API 密钥",
   "apiKeysEmptyHint": "用列表右上角创建；创建后可用 Bearer token 调用 API",
   "approve": "批准",
-  "allowlistTitle": "允许列表（{{count}}）",
-  "allowlistEmpty": "尚无 allowlist 工具",
+  "allowlistTitle": "工具权限（{{count}}）",
+  "allowlistEmpty": "尚无工具目录项目",
+  "totpStatusLoadFailed": "无法载入双重验证状态",
   "createApiKeyTitle": "创建 API 密钥",
   "createApiKeyDesc": "创建后完整 token 只显示一次",
   "createKeyBtn": "创建密钥",
@@ -367,7 +368,23 @@
     "sharePanelTitle": "共用 panel TOTP secret？",
     "sharePanelDesc": "风险高。请输入 SHARED 确认。",
     "confirmString": "确认字符串",
-    "enableShare": "启用共用"
+    "enableShare": "启用共用",
+    "invalidPub": "请贴上完整 OpenSSH 公钥行（ssh-ed25519／ssh-rsa／ecdsa…）。",
+    "dryRunOk": "预览试行完成。请查看下方预览。",
+    "strictDryRun": "严格模式预览",
+    "errorNoDetail": "测试失败（无详情）",
+    "strictBlocked": "套件或 PAM 未就绪，已停用套用 Strict。",
+    "privCloseWithoutAck": "已关闭。私钥不会再显示；若尚未保存，请立即重新生成。",
+    "loginNoProjects": "没有项目。在下面授权现有的 Linux 用户（root / tester）。写入/root/.ssh需要YSK_EXECUTE=1。",
+    "loginLinuxHint": "没有项目时使用。示例：root 或 tester。",
+    "pkgStatus": "Package {{status}}",
+    "pamStatus": "PAM {{status}}",
+    "kbdStatus": "sshd keyboard-interactive {{status}}",
+    "light": {
+      "green": "ok",
+      "yellow": "check",
+      "red": "missing"
+    }
   },
   "sessionsActive": "使用中",
   "sessionsOther": "其他设备",
@@ -390,5 +407,49 @@
   "revokeOthersDesc": "将结束 {{count}} 个其他会话。当前浏览器保持登录。",
   "sessionRevoked": "已登出该会话",
   "mySecurityHint": "",
-  "policyTotpHint": "全站政策：要求 admin 角色各自启用 2FA（每人自己扫码），不是共用同一组验证码。"
+  "policyTotpHint": "全站政策：要求 admin 角色各自启用 2FA（每人自己扫码），不是共用同一组验证码。",
+  "requireUser2fa": "要求所有面板用户启用 2FA",
+  "generateFail2ban": "产生 fail2ban 片段",
+  "changePasswordTitle": "变更登录密码",
+  "currentPassword": "目前密码",
+  "newPassword": "新密码",
+  "confirmNewPassword": "确认新密码",
+  "passwordMismatch": "两次新密码不一致。",
+  "changePassword": "变更密码",
+  "passwordChanged": "已更新密码。",
+  "strictNeedsEnrolled": "至少一名管理员已开 2FA，才可开启 Strict。",
+  "policyTotpNeedSelf": "请先在本帐号启用 2FA，否则确认码无法填写。",
+  "fail2banSnippetTitle": "fail2ban 片段",
+  "fail2banSnippetEmpty": "没有写入片段。",
+  "trustedDevicesTitle": "信任装置",
+  "noTrustedDevices": "尚未有信任装置。",
+  "strictConfirmTitle": "开启 Strict 2FA？",
+  "strictConfirmDesc": "未开 2FA 的用户会被拒绝登录。请确认你已有可用的 TOTP 或通行密钥。",
+  "revokeDevicesTitle": "撤销信任装置？",
+  "revokeDevicesDesc": "已记住的浏览器要再做 2FA。",
+  "approvalsHint": "高风险工具需要第二人批准时会出现在此。权限在「用户 → 权限」设定。",
+  "allowlistReadonly": "代理工具目录（只读）。能力授权在「用户 → 权限」设定。",
+  "colTool": "工具",
+  "colAllowed": "允许",
+  "colRisk": "风险",
+  "colApproval": "审批",
+  "risk": {
+    "low": "低",
+    "medium": "中",
+    "high": "高",
+    "critical": "严重"
+  },
+  "confirmDeleteApiKey": "删除此 API 密钥？",
+  "confirmDeleteApiKeyDesc": "删除后「{{name}}」无法再验证。此操作无法复原。",
+  "policyNoTotpHint": "This account has no 2FA yet — saving policy does not need a TOTP. Set up 2FA above if you want to require it for others.",
+  "sessionCli": "CLI",
+  "sessionApi": "API",
+  "statApiSessions": "API 会话",
+  "revokeOtherTitle": "退出 {{n}} 个其他会话",
+  "policyNeedSelf2fa": "首先在此帐户上启用 2FA，然后使用 TOTP 代码进行确认",
+  "revokeAllDevicesTitle": "撤销每个记住的设备 - 您和其他管理员必须再次验证 2FA",
+  "statSshValue": "{{keys}} keys · {{auth}} authorized",
+  "statSshHint": "Outbound identities / authorized login keys",
+  "needCurrentPassword": "Enter the current password first",
+  "passwordMin8": "New password must be at least 8 characters"
 }

package/locales/zh-CN/serviceExposure.json

@@ -27,5 +27,17 @@
   "restrictedNeedSource": "受限模式请至少加入 IP／网段或国家代码。",
   "privateStartTitle": "要对外开放 {{service}} 吗？",
   "confirmAndStart": "确认并启动",
-  "cloudSgNote": "仅主机防火墙 — 不会改云安全组（AWS／GCP／Azure）。"
+  "cloudSgNote": "仅主机防火墙 — 不会改云安全组（AWS／GCP／Azure）。",
+  "serviceNotInstalled": "此服務尚未安裝，防火牆規則不會生效。",
+  "modeUndecided": "尚未設定",
+  "modeLoading": "載入中",
+  "summaryUndecided": "尚未確認存取模式（目錄建議：{{suggested}}）。",
+  "summaryNotEnforced": "防火牆未啟用，面板未強制開放或封鎖此埠。",
+  "roleSmtp": "SMTP 提交",
+  "roleImap": "IMAP／POP3 收件",
+  "openButStopped": "端口打开 — 服务未运行",
+  "openNoTenants": "没有租户的公共港口",
+  "summaryFirewallOffOnly": "Host firewall is not enabled, so port rules are not enforced.",
+  "modePublicLive": "Public (live bind)",
+  "summaryPublicLive": "Listening on {{bind}} — reachable on all interfaces. Confirm access mode; this is not private."
 }

package/locales/zh-CN/services.json

@@ -4,8 +4,30 @@
     "start": "启动",
     "stop": "停止",
     "restart": "重启",
-    "reload": "重载"
+    "reload": "重载",
+    "enable": "开机启用",
+    "disable": "取消开机启用"
   },
+  "lifecycleTitle": "{{label}} 服務控制",
+  "startedOk": "已啟動 {{label}}",
+  "stoppedOk": "已停止 {{label}}",
+  "restartedOk": "已重啟 {{label}}",
+  "reloadedOk": "已重載 {{label}}",
+  "stopConfirmTitle": "停止 {{label}}？",
+  "stopConfirmDesc": "{{label}} 將停止接聽。需要時可在本頁再啟動。",
+  "stopConfirmEdgeDesc": "停止 {{label}} 會令站點與反向代理離線，直至再次啟動。",
+  "stopConfirmEdgeConsequence": "{{label}} 停止期間，本機不會提供 HTTP／HTTPS。",
+  "stopConfirmSshdTitle": "停止 sshd？",
+  "stopConfirmSshdDesc": "停止 sshd 會中斷遠端 SSH。請確認你仍有主機控制台或其他登入途徑。",
+  "stopConfirmSshdToken": "停止 sshd",
+  "stopConfirmSshdConsequence": "新的 SSH 連線會失敗，直至在主機控制台再啟動 sshd。",
+  "stopConfirmPanelTitle": "停止 YSK Server？",
+  "stopConfirmPanelDesc": "面板與 API 會離線，直至在主機上再啟動該服務單元。",
+  "stopConfirmPanelToken": "停止 ysk 服务器",
+  "stopConfirmPanelConsequence": "此瀏覽器工作階段會中斷。請從 SSH 或主機控制台啟動服務單元。",
+  "stopConfirmFail2banTitle": "停止 fail2ban？",
+  "stopConfirmFail2banDesc": "停止 fail2ban 後不會再自動封鎖 IP。網站與 SSH 會繼續運作。",
+  "stopConfirmFail2banConsequence": "在再次啟動 fail2ban 之前，新的攻擊來源不會被自動封鎖。",
   "actionDone": "已{{action}}",
   "runningOf": "{{running}}/{{total}} 运行中",
   "canMutate": "可变更",
@@ -31,10 +53,54 @@
   "bootPrefix": "开机 {{state}}",
   "controlPage": "控制页",
   "manageRuntime": "安装／更新",
+  "installOrOpen": "安裝／開啟",
   "protectionTitle": "保护探测",
   "protectionSub": "只读；不改防火墙／fail2ban",
   "protectionDoneNote": "保护探测完成",
   "probeDone": "探测完成",
   "runProtection": "执行保护探测",
-  "notProbedYet": "尚未探测"
+  "notProbedYet": "尚未探测",
+  "statusFilter": {
+    "all": "所有州",
+    "running": "跑步",
+    "failed": "失败的",
+    "missing": "未安装"
+  },
+  "stopNeedConfirm": "需确认",
+  "stopNeedConfirmPhrase": "需输入确认短语",
+  "enabledOk": "已设置 {{label}} 开机启动",
+  "bootDisabledWarn": "{{label}} 正在运行，但重启后不会自动启动。请启用开机启动。",
+  "bootDisabledShort": "未开机启动",
+  "mariadbNotInstalled": "尚未安装 MariaDB",
+  "mariadbNotInstalledMysqlOk": "Not installed: MariaDB (MySQL is installed)",
+  "restartConfirmPanelTitle": "Restart YSK Server?",
+  "restartConfirmPanelDesc": "The panel and API will drop briefly while the unit restarts.",
+  "unitNotFound": "Unit not installed",
+  "unitNa": "Not applicable",
+  "unitStatic": "static",
+  "unitIndirect": "indirect",
+  "needRunning": "{{label}} is not running",
+  "bootNa": "Not applicable",
+  "permLabel": "Permission",
+  "permCanChange": "Can change the system (superuser)",
+  "permBlocked": "Cannot change the system",
+  "permHint": "System change {{exec}} · Superuser {{root}}",
+  "clusterLegend": "Planned = saved in the panel, not applied on the host.",
+  "active": {
+    "active": "Running",
+    "inactive": "Stopped",
+    "not-found": "Not installed",
+    "failed": "Failed",
+    "tool": "Tool",
+    "activating": "Starting"
+  },
+  "sshdBootOffWarn": "sshd is not enabled on boot. After reboot this host will have no SSH rescue path.",
+  "restartConfirmTitle": "Restart {{label}}?",
+  "restartConfirmDesc": "Restart {{label}} now. Active connections may drop.",
+  "startVerifyFailed": "{{label}} start did not stay healthy.",
+  "stopNeedConfirmImpact": "Stop {{label}}? Active connections to this service will drop.",
+  "reloadTitle": "Reload {{label}} configuration without a full restart",
+  "stopConfirmPanelSshdOffDesc": "The panel and API will go offline. sshd is not enabled on boot, so SSH may not be a rescue path after reboot.",
+  "stopConfirmPanelSshdOffConsequence": "sshd is not enabled on boot. After reboot you may have no SSH rescue path.",
+  "ufwNoLifecycle": "UFW is not started or stopped from this matrix."
 }

package/locales/zh-CN/software.json

@@ -87,7 +87,8 @@
     "pick": "选择版本",
     "noTarget": "没有可更新版本",
     "needRuntimePage": "请在运行环境页安装此版本",
-    "noAptCandidate": "没有可用的 apt 候选版本"
+    "noAptCandidate": "没有可用的 apt 候选版本",
+    "sourceLabel": "来源"
   },
   "install": {
     "progress": "正在安装：{{list}}…",

package/locales/zh-CN/softwareLifecycle.json

@@ -50,12 +50,22 @@
     "generic": "相關服务可能停止",
     "purgeData": "将删除資料路径",
     "protectedSkipped": "受保护元件會跳过",
-    "runtimeStack": "将移除此运行时面板管理的全部版本"
+    "runtimeStack": "将移除此运行时面板管理的全部版本",
+    "containers": "正在运行的容器将停止",
+    "validators": "使用 Docker Compose 的验证者节点堆栈将停止"
   },
   "requestCancel": "请求取消",
   "cancelling": "取消中…",
   "dockCancelling": "取消中 · {{title}}",
   "dockCancelled": "已取消 · {{title}}",
   "cancelHint": "已请求取消。浏览器已停止接收日志；主机可能仍会完成当前的 apt／步骤。请稍后重新探测状态。",
-  "cancelledToast": "已取消操作（客户端已停止串流）"
+  "cancelledToast": "已取消操作（客户端已停止串流）",
+  "kindApply": "套用",
+  "kindScan": "扫描",
+  "kindDeploy": "部署",
+  "kindRuntime": "运行时",
+  "jobDone": "完成 · {{title}}",
+  "jobFailed": "失败 · {{title}}",
+  "uninstallUfwWarn": "卸载 UFW 后，主机将失去面板管理的端口防火墙。",
+  "uninstallFail2banWarn": "卸载 fail2ban 会停止 jail 并解除现有封锁。若要保留服务，请先把登录 IP 加入 ignoreip。"
 }

package/locales/zh-CN/ssl.json

@@ -99,5 +99,16 @@
   "requestDone": "证书申请已完成",
   "requestFailed": "证书申请未成功",
   "applyFailed": "申请失败",
-  "deletedCert": "已删除 {{domain}}"
+  "deletedCert": "已删除 {{domain}}",
+  "uninstallCertbotWarn": "解除安装 certbot 会使现有 Let's Encrypt 证书无法自动续期。",
+  "renew": "更新",
+  "renewFor": "为 {{domain}} 续订 Let's Encrypt",
+  "domainRequired": "请填写域名。",
+  "domainInvalid": "域名格式无效。",
+  "domainKnownHint": "可从已知项目、DNS 或邮件域名选择，或自行输入。",
+  "deleteNeedDomain": "删除此证书 — 输入域名进行确认",
+  "panelCertHint": "Panel HTTPS uses {{path}} (expires {{exp}}). It is not listed as a site certificate.",
+  "openPanelTls": "Open panel HTTPS",
+  "deleteDomain": "Delete {{domain}}",
+  "uninstallCertbot": "Uninstall certbot (loses auto-renew)"
 }

package/locales/zh-CN/stackWizard.json

@@ -11,9 +11,16 @@
   "componentsTitle": "将安装的组件",
   "dryRun": "预览试行",
   "installNow": "立即安装",
-  "uninstallHint": "勾选要移除的套餐；若全部不勾选，则移除清单内全部组件。默认保留数据。",
+  "uninstallHint": "勾选要移除的套餐。未勾选时无法移除。默认保留数据。",
   "dataPolicy": "数据策略",
   "keepData": "保留数据",
   "purgeData": "清除数据",
-  "uninstallNow": "立即移除"
+  "uninstallNow": "立即移除",
+  "uninstallNeedSelect": "至少选择一个捆绑包。空选择不再意味着全部删除。",
+  "uninstallConfirmTitle": "删除选定的捆绑包？",
+  "uninstallConfirmDesc": "{{count}} 个捆绑包将被删除。键入 REMOVE 进行确认。",
+  "countHint": "These counts are OS packages in the software plan — not the service-matrix units on the other tab.",
+  "executeRoot": "System changes {{execute}} · administrator {{root}}",
+  "manifestPlan": "Plan {{plan}} ({{bundles}})",
+  "manifestHint": "Last chosen software plan and bundles"
 }

package/locales/zh-CN/support.json

@@ -1,7 +1,7 @@
 {
   "title": "支持",
   "sub": "Creator、赞助与 YSK Limited — 免费产品，实在支持",
-  "creatorTitle": "Creator",
+  "creatorTitle": "创作者",
   "creatorBody": "YSK Server 是免费、诚实的单机控制平面，给想自己掌控服务器的人。项目开源维护；你的反馈和 bug 报告很重要。",
   "donateTitle": "支持／赞助",
   "donateBody": "如果 YSK Server 帮你省时间，欢迎赞助开发。每一份支持都帮产品继续免费给所有人用。",
@@ -24,5 +24,21 @@
   "cryptoNetwork": "网络",
   "cryptoAddress": "地址",
   "copy": "复制",
-  "copied": "已复制"
+  "copied": "已复制",
+  "docsLink": "说明文件",
+  "diagTitle": "诊断总结",
+  "diagBody": "复制版本、执行并托管事实以粘贴到电子邮件中。这不是完整的日志包。",
+  "diagCopy": "复制诊断摘要",
+  "diagCopied": "已复制诊断摘要",
+  "copyTitle": "复制 {{address}}",
+  "diagCopyTitle": "复制版本、EXECUTE 与主机资料",
+  "diagPreview": "预览将复制的内容",
+  "diagLoading": "正在加载诊断...",
+  "diagLoadFailed": "无法加载诊断",
+  "copiedAddr": "Copied {{addr}}",
+  "diagStatus": "Status",
+  "diagMode": "Mode",
+  "diagProtection": "Protection",
+  "diagHostname": "Hostname",
+  "diagOs": "OS"
 }