romdevtools 0.13.0

package/src/platforms/snes/lib/pvsneslib/source/snesmodwla.asm

@@ -0,0 +1,1186 @@
+;----------------------------------------------------------------------
+;
+;	SNESMod from CA65 to WLA DX! By KungFuFurby.
+;	Original SNESMod by mukunda
+;	Conversion Started: 3/9/12, Last update: 3/9/12 Reason: First attempt.
+;	Adapted by Alekmaul for pvsneslib
+;
+;	This software is provided 'as-is', without any express or implied
+;	warranty.  In no event will the authors be held liable for any
+;	damages arising from the use of this software.
+;
+;	Permission is granted to anyone to use this software for any
+;	purpose, including commercial applications, and to alter it and
+;	redistribute it freely, subject to the following restrictions:
+;
+;	1.	The origin of this software must not be misrepresented; you
+;		must not claim that you wrote the original software. If you use
+;		this software in a product, an acknowledgment in the product
+;		documentation would be appreciated but is not required.
+;	2.	Altered source versions must be plainly marked as such, and
+;		must not be misrepresented as being the original software.
+;	3.	This notice may not be removed or altered from any source
+;		distribution.
+;
+;----------------------------------------------------------------------
+
+;----------------------------------------------------------------------
+; soundbank defs
+;----------------------------------------------------------------------
+
+.define SB_SAMPCOUNT	8000h
+.define SB_MODCOUNT     8002h
+.define SB_MODTABLE     8004h
+.define SB_SRCTABLE     8184h
+
+.ifdef HIROM
+.redefine SB_SAMPCOUNT  0000h
+.redefine SB_MODCOUNT   0002h
+.redefine SB_MODTABLE   0004h
+.redefine SB_SRCTABLE   0184h
+.endif
+
+.equ REG_APUIO0		2140h	; Sound Register			1B/RW
+.equ REG_APUIO1		2141h	; Sound Register			1B/RW
+.define REG_APUIO2		2142h	; Sound Register			1B/RW
+.define REG_APUIO3		2143h	; Sound Register			1B/RW
+.define REG_SLHV		2137h	; Software Latch For H/V Counter		1B/R
+.define REG_OPVCT		213Dh	; Y Scanline Location			1B/R D
+
+.equ REG_NMI_TIMEN	$4200
+
+;----------------------------------------------------------------------
+; spc commands
+;----------------------------------------------------------------------
+.define CMD_LOAD	00h
+.define CMD_LOADE	01h
+.define CMD_VOL		02h
+.define CMD_PLAY	03h
+.define CMD_STOP	04h
+.define CMD_MVOL	05h
+.define CMD_FADE	06h
+.define CMD_RES		07h
+.define CMD_FX		08h
+.define CMD_SSIZE	09h
+.define CMD_PAUSE	0Ah
+.define CMD_RESUME	0Bh
+
+;----------------------------------------------------------------------
+
+; process for 5 scanlines
+.define PROCESS_TIME 5
+.define INIT_DATACOPY 13
+
+;======================================================================
+;zeropage
+;======================================================================
+
+.BASE $00
+.RAMSECTION ".fp" BANK 0 SLOT 1
+spc_ptr:	DS 3
+spc_v:		DS 1
+spc_bank:	DS 1
+
+spc1:		DS 2
+spc2:		DS 2
+
+spc_fread:	DS 1
+spc_fwrite:	DS 1
+
+; port record [for interruption]
+spc_pr:		DS 4
+
+digi_src:	DS 3
+digi_src2:	DS 3
+
+SoundTable:	DS 3
+
+spc_fifo:	DS 256	; 128-byte command fifo
+spc_sfx_next:	DS 1
+spc_q:		DS 1
+
+digi_init:	DS 1
+digi_pitch:	DS 1
+digi_vp:	DS 1
+digi_remain:	DS 2
+digi_active:	DS 1
+digi_copyrate:	DS 1
+
+
+.ENDS
+
+;======================================================================
+;.segment "RODATA"
+;======================================================================
+
+.DEFINE SPC_BOOT 0400h ; spc entry/load address
+
+.BASE BASE_0
+.SECTION ".soundmod" SUPERFREE
+
+;======================================================================
+;.code
+;======================================================================
+
+.index 16
+.accu 8
+
+;----------------------------------------------------------------------
+; void spcBoot(void)
+spcBoot:
+	php               
+	sei
+	phb               
+	sep #$20
+    lda #$0
+	sta REG_NMI_TIMEN 
+    pha
+	plb 			; change bank address to 0
+
+-:	ldx	REG_APUIO0	; wait for 'ready signal from SPC
+	cpx	#0BBAAh		;
+	bne	-		;--------------------------------------
+	stx	REG_APUIO1	; start transfer:
+	ldx	#SPC_BOOT	; port1 = !0
+	stx	REG_APUIO2	; port2,3 = transfer address
+	lda	#$CC		; port0 = 0CCh
+	sta	REG_APUIO0	;--------------------------------------
+-:	cmp	REG_APUIO0	; wait for SPC
+	bne	-		;
+;----------------------------------------------------------------------
+; ready to transfer
+;----------------------------------------------------------------------
+	lda.l	SM_SPC	; read first byte
+	xba			;
+	lda	#0		;
+	ldx	#1		;
+	bra	sb_start	;
+;----------------------------------------------------------------------
+; transfer data
+;----------------------------------------------------------------------
+sb_send:
+;----------------------------------------------------------------------
+	xba			; swap DATA into A
+	lda.l	SM_SPC, x; read next byte
+	inx			; swap DATA into B
+	xba			;--------------------------------------
+-:	cmp	REG_APUIO0	; wait for SPC
+	bne	-		;--------------------------------------
+	ina			; increment counter (port0 data)
+;----------------------------------------------------------------------
+sb_start:
+;----------------------------------------------------------------------
+	rep	#$20		; write port0+port1 data
+	sta	REG_APUIO0	;
+	sep	#$20		;--------------------------------------
+	cpx	#SM_SPC_end-SM_SPC	; loop until all bytes transferred
+	bcc	sb_send				;
+;----------------------------------------------------------------------
+; all bytes transferred
+;----------------------------------------------------------------------
+-:	cmp	REG_APUIO0	; wait for SPC
+	bne	-		;--------------------------------------
+	ina			; add 2 or so...
+	ina			;--------------------------------------
+				; mask data so invalid 80h message won't get sent
+	stz	REG_APUIO1	; port1=0
+	ldx	#SPC_BOOT	; port2,3 = entry point
+	stx	REG_APUIO2	;
+	sta	REG_APUIO0	; write P0 data
+				;--------------------------------------
+-:	cmp	REG_APUIO0	; final sync
+	bne	-		;--------------------------------------
+	stz	REG_APUIO0
+
+	stz	spc_v		; reset V
+	stz	spc_q		; reset Q
+	stz	spc_fwrite	; reset command fifo
+	stz	spc_fread	;
+	stz	spc_sfx_next	;
+
+	stz	spc_pr+0
+	stz	spc_pr+1
+	stz	spc_pr+2
+	stz	spc_pr+3
+
+	stz	spc_ptr+0
+	stz	spc_ptr+1
+	stz	spc_ptr+2
+	stz spc_bank
+
+	stz spc1+0
+	stz spc1+1
+	stz spc2+0
+	stz spc2+1
+
+
+	stz digi_src+0
+	stz digi_src+1
+	stz digi_src+2
+	stz digi_src2+0
+	stz digi_src2+1
+	stz digi_src2+2
+
+	stz SoundTable+0
+	stz SoundTable+1
+	stz SoundTable+2
+
+	stz spc_sfx_next
+
+	stz digi_init
+	stz digi_pitch
+	stz digi_vp
+	stz digi_remain+0
+	stz digi_remain+1
+	stz digi_active
+	stz digi_copyrate
+
+	ldx #$0
+	lda #$0
+-:	sta spc_fifo,x
+	inx
+	cpx #$ff
+	bne -
+
+;----------------------------------------------------------------------
+; driver installation successful
+;----------------------------------------------------------------------
+	plb
+	cli
+	plp
+	rtl			; return
+
+;----------------------------------------------------------------------
+; void spcSetBank(u8 *bank)
+spcSetBank:
+	php
+	phb
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	lda	8,s	; index of bank -> 6..7 adrr, 8 bank
+	sta	spc_bank
+
+	plb
+	plp
+	rtl
+
+;----------------------------------------------------------------------
+; increment memory pointer by 2
+.macro incptr
+	iny
+	iny
+.ifndef HIROM
+	bmi	+	;_catch_overflow
+	inc	spc_ptr+2
+	ldy	#8000h
+.else
+	bne	+	;_catch_overflow
+	inc	spc_ptr+2
+.endif
+
++:
+.endm
+
+;----------------------------------------------------------------------
+; void spcLoad(u16 musIndex)
+spcLoad:
+	php
+	phb
+
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	rep #$30
+	lda	6,s	; module_id
+	tax
+	sep #$20
+
+	phx				; flush fifo!
+	jsr	xspcFlush		;
+	plx				;
+
+	phx
+	ldy	#SB_MODTABLE
+	sty	spc2
+	jsr	get_address
+	rep	#$20
+	lda	[spc_ptr], y	; X = MODULE SIZE
+	;lda	spc_ptr, y	; X = MODULE SIZE
+	tax
+
+	incptr
+
+	lda	[spc_ptr], y	; read SOURCE LIST SIZE
+	;lda	spc_ptr, y	; read SOURCE LIST SIZE
+
+	incptr
+
+	sty	spc1		; pointer += listsize*2
+	asl			;
+	adc	spc1		;
+.ifndef HIROM
+	bmi	+		;
+	ora	#8000h		;
+.else
+	bcc	+
+.endif
+	inc	spc_ptr+2	;
++:	tay			;
+
+	sep	#20h		;
+	lda	spc_v		; wait for spc
+	pha			;
+-:	cmp	REG_APUIO1	;
+	bne	-		;------------------------------
+	lda	#CMD_LOAD	; send LOAD message
+	sta	REG_APUIO0	;
+	pla			;
+	eor	#80h		;
+	ora	#01h		;
+	sta	spc_v		;
+	sta	REG_APUIO1	;------------------------------
+-:	cmp	REG_APUIO1	; wait for spc
+	bne	-		;------------------------------
+	jsr	do_transfer
+
+	;------------------------------------------------------
+	; transfer sources
+	;------------------------------------------------------
+
+	plx
+	ldy	#SB_MODTABLE
+	sty	spc2
+	jsr	get_address
+	incptr
+
+	rep	#20h		; x = number of sources
+	lda	[spc_ptr], y	;
+	tax			;
+
+	incptr
+
+transfer_sources:
+
+	lda	[spc_ptr], y	; read source index
+	sta	spc1		;
+
+	incptr
+
+	phy			; push memory pointer
+	sep	#20h		; and counter
+	lda	spc_ptr+2	;
+	pha			;
+	phx			;
+
+	jsr	transfer_source
+
+	plx			; pull memory pointer
+	pla			; and counter
+	sta	spc_ptr+2	;
+	ply			;
+
+	dex
+	bne	transfer_sources
+@no_more_sources:
+
+	stz	REG_APUIO0	; end transfers
+	lda	spc_v		;
+	eor	#80h		;
+	sta	spc_v		;
+	sta	REG_APUIO1	;-----------------
+-:	cmp	REG_APUIO1	; wait for spc
+	bne	-		;-----------------
+	sta	spc_pr+1
+	stz	spc_sfx_next	; reset sfx counter
+
+	plb
+	plp
+	rtl
+
+;--------------------------------------------------------------
+; spc1 = source index
+;--------------------------------------------------------------
+transfer_source:
+;--------------------------------------------------------------
+
+	ldx	spc1
+	ldy	#SB_SRCTABLE
+	sty	spc2
+	jsr	get_address
+
+	lda	#01h		; port0=01h
+	sta	REG_APUIO0	;
+	rep	#20h		; x = length (bytes->words)
+	lda	[spc_ptr], y	;
+	incptr			;
+	ina			;
+	lsr			;
+	tax			;
+	lda	[spc_ptr], y	; port2,3 = loop point
+	sta	REG_APUIO2
+	incptr
+	sep	#20h
+
+	lda	spc_v		; send message
+	eor	#80h		;
+	ora	#01h		;
+	sta	spc_v		;
+	sta	REG_APUIO1	;-----------------------
+-:	cmp	REG_APUIO1	; wait for spc
+	bne	-		;-----------------------
+	cpx	#0
+	beq	end_transfer	; if datalen != 0
+	bra	do_transfer	; transfer source data
+
+;--------------------------------------------------------------
+; spc_ptr+y: source address
+; x = length of transfer (WORDS)
+;--------------------------------------------------------------
+transfer_again:
+	eor	#80h		;
+	sta	REG_APUIO1	;
+	sta	spc_v		;
+	incptr			;
+-:	cmp	REG_APUIO1	;
+	bne	-		;
+;--------------------------------------------------------------
+do_transfer:
+;--------------------------------------------------------------
+
+	rep	#20h		; transfer 1 word
+	lda	[spc_ptr], y	;
+	sta	REG_APUIO2	;
+	sep	#20h		;
+	lda	spc_v		;
+	dex			;
+	bne	transfer_again	;
+
+	incptr
+
+end_transfer:
+	lda	#0		; final word was transferred
+	sta	REG_APUIO1	; write p1=0 to terminate
+	sta	spc_v		;
+-:	cmp	REG_APUIO1	;
+	bne	-		;
+	sta	spc_pr+1
+	rts
+
+;--------------------------------------------------------------
+; spc2 = table offset
+; x = index
+;
+; returns: spc_ptr = 0,0,bank, Y = address
+get_address:
+;--------------------------------------------------------------
+
+	lda	spc_bank	; spc_ptr = bank:SB_MODTABLE+module_id*3
+	sta	spc_ptr+2	;
+	rep	#20h		;
+	stx	spc1		;
+	txa			;
+	asl			;
+	adc	spc1		;
+	adc	spc2		;
+	sta	spc_ptr		;
+
+	lda	[spc_ptr]	; read address
+	pha			;
+	sep	#20h		;
+	ldy	#2		;
+	lda	[spc_ptr],y	; read bank#
+
+	clc			; spc_ptr = long address to module
+	adc	spc_bank	;
+	sta	spc_ptr+2	;
+	ply			;
+	stz	spc_ptr
+	stz	spc_ptr+1
+	rts			;
+
+;----------------------------------------------------------------------
+; void spcLoadEffect(u16 sfxIndex)
+spcLoadEffect:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	rep #$30
+	lda	6,s	; id
+	tax
+	sep #$20
+
+	ldy	#SB_SRCTABLE	; get address of source
+	sty	spc2		;
+	jsr	get_address	;--------------------------------------
+	lda	spc_v		; sync with SPC
+-:	cmp	REG_APUIO1	;
+	bne	-		;--------------------------------------
+	lda	#CMD_LOADE	; write message
+	sta	REG_APUIO0	;--------------------------------------
+	lda	spc_v		; dispatch message and wait
+	eor	#80h		;
+	ora	#01h		;
+	sta	spc_v		;
+	sta	REG_APUIO1	;
+-:	cmp	REG_APUIO1	;
+	bne	-		;--------------------------------------
+	rep	#20h		; x = length (bytes->words)
+	lda	[spc_ptr], y	;
+	ina			;
+	lsr			;
+	incptr			;
+	tax			;--------------------------------------
+	incptr			; skip loop
+	sep	#20h		;--------------------------------------
+	jsr	do_transfer	; transfer data
+				;--------------------------------------
+	lda	spc_sfx_next	; return sfx index
+	inc	spc_sfx_next	;
+
+	plb
+	plp
+	rtl
+
+;**********************************************************************
+; a = id
+; spc1 = params
+;**********************************************************************
+QueueMessage:
+	sei				; disable IRQ in case user
+					; has spcProcess in irq handler
+
+	sep	#10h			; queue data in fifo
+	ldx	spc_fwrite		;
+	sta	spc_fifo, x		;
+	inx				;
+	lda	spc1			;
+	sta	spc_fifo, x		;
+	inx				;
+	lda	spc1+1			;
+	sta	spc_fifo, x		;
+	inx				;
+	stx	spc_fwrite		;
+	rep	#10h			;
+	cli				;
+
+	plb
+	plp
+	rtl
+
+;----------------------------------------------------------------------
+; void spcFlush(void)
+spcFlush:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb 				; change bank address to 0
+
+spcFlush1:
+	lda	spc_fread		; call spcProcess until
+	cmp	spc_fwrite		; fifo becomes empty
+	beq	@exit1			;
+	jsr	spcProcessMessages	;
+	bra	spcFlush1		;
+
+@exit1:
+	plb
+	plp
+	rtl
+
+;----------------------------------------------------------------------
+xspcFlush:
+;----------------------------------------------------------------------
+	lda	spc_fread		; call spcProcess until
+	cmp	spc_fwrite		; fifo becomes empty
+	beq	@exit			;
+	jsr	xspcProcessMessages	;
+	bra	xspcFlush		;
+@exit:	rts				;
+
+xspcProcessMessages:
+
+	sep	#$10			; 8-bit index during this function
+	lda	spc_fwrite		; exit if fifo is empty
+	cmp	spc_fread		;
+	beq	@xexit2			;------------------------------
+	ldy	#PROCESS_TIME		; y = process time
+;----------------------------------------------------------------------
+@xprocess_again:
+;----------------------------------------------------------------------
+	lda	spc_v			; test if spc is ready
+	cmp	REG_APUIO1		;
+	bne	@xnext			; no: decrement time
+					;------------------------------
+	ldx	spc_fread		; copy message arguments
+	lda	spc_fifo, x		; and update fifo read pos
+	sta	REG_APUIO0		;
+	sta	spc_pr+0
+	inx				;
+	lda	spc_fifo, x		;
+	sta	REG_APUIO2		;
+	sta	spc_pr+2
+	inx				;
+	lda	spc_fifo, x		;
+	sta	REG_APUIO3		;
+	sta	spc_pr+3
+	inx				;
+	stx	spc_fread		;------------------------------
+	lda	spc_v			; dispatch message
+	eor	#80h			;
+	sta	spc_v			;
+	sta	REG_APUIO1		;------------------------------
+	sta	spc_pr+1
+	lda	spc_fread		; exit if fifo has become empty
+	cmp	spc_fwrite		;
+	beq	@xexit2			;
+;----------------------------------------------------------------------
+@xnext:
+;----------------------------------------------------------------------
+	lda	REG_SLHV		; latch H/V and test for change
+	lda	REG_OPVCT		;------------------------------
+	cmp	spc1			; we will loop until the VCOUNT
+	beq	@xprocess_again		; changes Y times
+	sta	spc1			;
+	dey				;
+	bne	@xprocess_again		;
+;----------------------------------------------------------------------
+@xexit2:
+;----------------------------------------------------------------------
+	rep	#$10			; restore 16-bit index
+	rts				;
+
+;----------------------------------------------------------------------
+; void spcProcess(void)
+spcProcess:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb 				; change bank address to 0
+
+	lda	digi_active
+	beq	spcProcessMessages
+	jsr	spcProcessStream
+
+spcProcessMessages:
+
+	sep	#10h			; 8-bit index during this function
+	lda	spc_fwrite		; exit if fifo is empty
+	cmp	spc_fread		;
+	beq	@exit2			;------------------------------
+	ldy	#PROCESS_TIME		; y = process time
+;----------------------------------------------------------------------
+@process_again:
+;----------------------------------------------------------------------
+	lda	spc_v			; test if spc is ready
+	cmp	REG_APUIO1		;
+	bne	@next			; no: decrement time
+					;------------------------------
+	ldx	spc_fread		; copy message arguments
+	lda	spc_fifo, x		; and update fifo read pos
+	sta	REG_APUIO0		;
+	sta	spc_pr+0
+	inx				;
+	lda	spc_fifo, x		;
+	sta	REG_APUIO2		;
+	sta	spc_pr+2
+	inx				;
+	lda	spc_fifo, x		;
+	sta	REG_APUIO3		;
+	sta	spc_pr+3
+	inx				;
+	stx	spc_fread		;------------------------------
+	lda	spc_v			; dispatch message
+	eor	#80h			;
+	sta	spc_v			;
+	sta	REG_APUIO1		;------------------------------
+	sta	spc_pr+1
+	lda	spc_fread		; exit if fifo has become empty
+	cmp	spc_fwrite		;
+	beq	@exit2			;
+;----------------------------------------------------------------------
+@next:
+;----------------------------------------------------------------------
+	lda	REG_SLHV		; latch H/V and test for change
+	lda	REG_OPVCT		;------------------------------
+	cmp	spc1			; we will loop until the VCOUNT
+	beq	@process_again		; changes Y times
+	sta	spc1			;
+	dey				;
+	bne	@process_again		;
+;----------------------------------------------------------------------
+@exit2:
+;----------------------------------------------------------------------
+	rep	#$10			; restore 16-bit index
+	plb 
+	plp 
+	rtl 
+
+;---------------------------------------------------------------------------------
+; void spcPlay(u8 startPos)
+spcPlay:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb 				; change bank address to 0
+
+	lda	6,s				; module_id
+
+	sta	spc1+1			; id -- xx
+	lda	#CMD_PLAY		;
+	jmp	QueueMessage		;
+
+;---------------------------------------------------------------------------------
+; void spcStop(void)
+spcStop:
+	php 				;
+	phb 				; 
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	lda	#CMD_STOP
+	jmp	QueueMessage
+
+;---------------------------------------------------------------------------------
+; void spcPauseMusic(void)
+spcPauseMusic:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb
+
+	lda	#CMD_PAUSE
+	jmp	QueueMessage
+
+;---------------------------------------------------------------------------------
+; void spcResumeMusic(void)
+spcResumeMusic:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb
+
+	lda	#CMD_RESUME
+	jmp	QueueMessage
+
+;---------------------------------------------------------------------------------
+; void spcSetModuleVolume(u8 vol)
+spcSetModuleVolume:
+	php
+	phb
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	lda	6,s	; volume
+
+;	txa				;queue:
+	sta	spc1+1			; id -- vv
+	lda	#CMD_MVOL		;
+	jmp	QueueMessage		;
+
+;---------------------------------------------------------------------------------
+; void spcFadeModuleVolume(u16 vol, u16 fadespeed)
+spcFadeModuleVolume:
+	php
+	phb
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	rep #$20
+	lda	6,s	; speed
+	tay
+	lda	8,s	; target volume
+	tax
+	sep #$20
+
+	txa				;queue:
+	sta	spc1+1			; id xx yy
+	tya				;
+	sta	spc1			;
+	lda	#CMD_FADE
+	jmp	QueueMessage
+
+;---------------------------------------------------------------------------------
+; void spcEffect(u16 pitch, u16 sfxIndex, u8 volpan)
+spcEffect:
+	php
+	phb
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	rep #$20
+	lda	6,s	; pitch
+	tay
+	lda	8,s	; id
+	tax
+	sep #$20
+	lda	10,s	; v*16 + p
+
+	sta	spc1			; spc1.l = "vp"
+	sty	spc2			; spc1.h = "sh"
+	txa				;
+	asl				;
+	asl				;
+	asl				;
+	asl				;
+	ora	spc2			;
+	sta	spc1+1			;------------------------------
+	lda	#CMD_FX			; queue FX message
+	jmp	QueueMessage		;
+
+;---------------------------------------------------------------------------------
+; u8 spcGetMusicPosition(void)
+spcGetMusicPosition: 
+	php
+	sep #$20
+	stz.b tcc__r0
+	lda.l REG_APUIO3
+	sta.b tcc__r0
+	rep #$20
+	plp
+	rtl
+
+;======================================================================
+;
+; STREAMING
+;
+;======================================================================
+
+;---------------------------------------------------------------------------------
+; void spcSetSoundTable(char *sndTableAddr);
+spcSetSoundTable:
+	php 
+	phb 
+	sep #$20
+	lda #$0
+	pha
+	plb 					; change bank address to 0
+
+	rep #$20
+	lda	6,s					; src (lower 16 bits)
+	sta	SoundTable
+	sep #$20
+	lda	8,s					; src bank
+	sta SoundTable+2
+
+	plb
+	plp
+	rtl			; return
+
+;----------------------------------------------------------------------
+; void spcAllocateSoundRegion(u8 size)
+spcAllocateSoundRegion:
+	php 
+	phb 				
+	sep #$20
+	lda #$0
+	pha
+	plb 				; change bank address to 0
+
+	lda	6,s				; size of buffer
+	pha					; flush command queue
+	jsr	xspcFlush		;
+						;
+	lda	spc_v			; wait for spc
+-:	cmp	REG_APUIO1		;
+	bne	-				;
+;----------------------------------------------------------------------
+	pla					; set parameter
+	sta	REG_APUIO3		;
+;----------------------------------------------------------------------
+	lda	#CMD_SSIZE		; set command
+	sta	REG_APUIO0		;
+	sta	spc_pr+0		;
+;----------------------------------------------------------------------
+	lda	spc_v			; send message
+	eor	#128			;
+	sta	REG_APUIO1		;
+	sta	spc_v			;
+	sta	spc_pr+1		;
+;----------------------------------------------------------------------
+	plb
+	plp 
+	rtl 
+
+;----------------------------------------------------------------------
+; void spcPlaySound(u8 sndIndex)
+spcPlaySound:
+	php 
+	phb 
+
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	lda	6,s	; index of sound
+
+	xba
+	lda	#128
+	xba
+	ldx	#-1
+	ldy	#-1
+	jmp	spcPlaySoundEx
+
+;----------------------------------------------------------------------
+; void spcPlaySoundV(u8 sndIndex, u16 volume)
+spcPlaySoundV:
+	php 
+	phb 
+
+	sep #$20
+	lda #$0
+	pha
+	plb ; change bank address to 0
+
+	rep #$20
+	lda	6,s	; volume of sound
+	tay
+		sep #$20
+	lda	8,s	; index of sound
+
+	xba
+	lda	#128
+	xba
+	ldx	#-1
+	jmp	spcPlaySoundEx
+
+;----------------------------------------------------------------------
+; a = index
+; b = pitch
+; y = vol (0-15)
+; x = pan (0-15, 8=center)
+;======================================================================
+spcPlaySoundEx:
+;======================================================================
+	sep	#10h			; push 8bit vol,pan on stack
+	phy				;
+	phx				;
+;----------------------------------------------------------------------------
+	rep	#30h			; um
+	pha				;
+;----------------------------------------------------------------------------
+	and	#0FFh			; y = sound table index
+	asl				;
+	asl				;
+	asl				;
+	tay				;
+;----------------------------------------------------------------------------
+	pla				; a = rate
+	xba				;
+	and	#255			; clear B
+	sep	#20h			;
+;----------------------------------------------------------------------------
+	cmp	#0			; if a < 0 then use default
+	bmi	@use_default_pitch	; otherwise use direct
+	sta	digi_pitch		;
+	bra	@direct_pitch		;
+@use_default_pitch:			;
+	lda	[SoundTable], y		;
+	sta	digi_pitch		;
+@direct_pitch:				;
+;----------------------------------------------------------------------------
+	tax				; set transfer rate
+	lda.l	digi_rates, x ;lda	digi_rates.w, x		; fixed by KunfuFurby 180210, tks !
+	sta	digi_copyrate		;
+;----------------------------------------------------------------------------
+	iny				; [point to PAN]
+	pla				; if pan <0 then use default
+	bmi	@use_default_pan	; otherwise use direct
+	sta	spc1
+	bra	@direct_pan
+@use_default_pan:
+	lda	[SoundTable], y
+	sta	spc1
+@direct_pan:
+;----------------------------------------------------------------------------
+	iny				; [point to VOL]
+	pla				; if vol < 0 then use default
+	bmi	@use_default_vol	; otherwise use direct
+	bra	@direct_vol
+@use_default_vol:
+	lda	[SoundTable], y
+@direct_vol:
+;----------------------------------------------------------------------------
+	asl				; vp = (vol << 4) | pan
+	asl				;
+	asl				;
+	asl				;
+	ora	spc1			;
+	sta	digi_vp			;
+;----------------------------------------------------------------------------
+	iny				; [point to LENGTH]
+	rep	#20h			; copy length
+	lda	[SoundTable], y		;
+	sta	digi_remain		;
+;----------------------------------------------------------------------------
+	iny				; [point to SOURCE]
+	iny				;
+	lda	[SoundTable], y		; copy SOURCE also make +2 copy
+	iny				;
+	iny				;
+	sta	digi_src		;
+	ina				;
+	ina				;
+	sta	digi_src2		;
+	sep	#20h			;
+	lda	[SoundTable], y		;
+	sta	digi_src+2		;
+	sta	digi_src2+2		;
+;----------------------------------------------------------------------------
+	lda	#1			; set flags
+	sta	digi_init		;
+	sta	digi_active		;
+;----------------------------------------------------------------------------
+	plb
+	plp 
+	rtl
+
+;============================================================================
+spcProcessStream:
+;============================================================================
+	rep	#20h			; test if there is data to copy
+	lda	digi_remain		;
+	bne	+			;
+	sep	#20h			;
+	stz	digi_active		;
+	rts				;
++:	sep	#20h			;
+;-----------------------------------------------------------------------
+	lda	spc_pr+0		; send STREAM signal
+	ora	#128			;
+	sta	REG_APUIO0		;
+;-----------------------------------------------------------------------
+-:	bit	REG_APUIO0		; wait for SPC
+	bpl	-			;
+;-----------------------------------------------------------------------
+	stz	REG_APUIO1		; if digi_init then:
+	lda	digi_init		;   clear digi_init
+	beq	@no_init		;   set newnote flag
+	stz	digi_init		;   copy vp
+	lda	digi_vp			;   copy pan
+	sta	REG_APUIO2		;   copy pitch
+	lda	digi_pitch		;
+	sta	REG_APUIO3		;
+	lda	#1			;
+	sta	REG_APUIO1		;
+	lda	digi_copyrate		; copy additional data
+	clc				;
+	adc	#INIT_DATACOPY		;
+	bra	@newnote		;
+@no_init:				;
+;-----------------------------------------------------------------------
+	lda	digi_copyrate		; get copy rate
+@newnote:
+	rep	#20h			; saturate against remaining length
+	and	#0FFh			;
+	cmp	digi_remain		;
+	bcc	@nsatcopy		;
+	lda	digi_remain		;
+	stz	digi_remain		;
+	bra	@copysat		;
+@nsatcopy:				;
+;-----------------------------------------------------------------------
+	pha				; subtract amount from remaining
+	sec				;
+	sbc	digi_remain		;
+	eor	#0FFFFH			;
+	ina				;
+	sta	digi_remain		;
+	pla				;
+@copysat:				;
+;-----------------------------------------------------------------------
+	sep	#20h			; send copy amount
+	sta	REG_APUIO0		;
+;-----------------------------------------------------------------------
+	sep	#10h			; spc1 = nn*3 (amount of tribytes to copy)
+	tax				; x = vbyte
+	sta	spc1			;
+	asl				;
+	clc				;
+	adc	spc1			;
+	sta	spc1			;
+	ldy	#0			;
+;-----------------------------------------------------------------------
+
+
+@next_block:
+
+	lda	[digi_src2], y
+	sta	spc2
+	rep	#20h			; read 2 bytes
+	lda	[digi_src], y		;
+-:	cpx	REG_APUIO0		;-sync with spc
+	bne	-			;
+	inx				; increment v
+	sta	REG_APUIO2		; write 2 bytes
+	sep	#20h			;
+	lda	spc2			; copy third byte
+	sta	REG_APUIO1		;
+	stx	REG_APUIO0		; send data
+	iny				; increment pointer
+	iny				;
+	iny				;
+	dec	spc1			; decrement block counter
+	bne	@next_block		;
+;-----------------------------------------------------------------------
+-:	cpx	REG_APUIO0		; wait for spc
+	bne	-			;
+;-----------------------------------------------------------------------:
+	lda	spc_pr+0		; restore port data
+	sta	REG_APUIO0		;
+	lda	spc_pr+1		;
+	sta	REG_APUIO1		;
+	lda	spc_pr+2		;
+	sta	REG_APUIO2		;
+	lda	spc_pr+3		;
+	sta	REG_APUIO3		;
+;-----------------------------------------------------------------------
+	tya				; add offset to source
+	rep	#31h			;
+	and	#255			;
+	adc	digi_src		;
+	sta	digi_src		;
+	ina				;
+	ina				;
+	sta	digi_src2		;
+	sep	#20h			;
+;-----------------------------------------------------------------------
+	rts
+
+digi_rates:
+	.db	0, 3, 5, 7, 9, 11, 13
+
+.ENDS
+
+; no more compiled with current toolchain as tasm is only windows compatible
+; and we never made some changes in the SPC-700 driver
+.INCLUDE "sm_spc.asm"
+
+