romdevtools 0.13.0

package/src/platforms/gba/lib/libgba/include/gba_dma.h

@@ -0,0 +1,100 @@
+/*
+
+	Header file for libgba DMA definitions
+
+	Copyright 2003-2007 by Dave Murphy.
+
+	This library is free software; you can redistribute it and/or
+	modify it under the terms of the GNU Library General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later version.
+
+	This library is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+	Library General Public License for more details.
+
+	You should have received a copy of the GNU Library General Public
+	License along with this library; if not, write to the Free Software
+	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+	USA.
+
+	Please report all bugs and problems through the bug tracker at
+	"http://sourceforge.net/tracker/?group_id=114505&atid=668551".
+
+*/
+
+//---------------------------------------------------------------------------------
+#ifndef _gba_dma_h_
+#define _gba_dma_h_
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+extern "C" {
+#endif
+//---------------------------------------------------------------------------------
+
+#include "gba_base.h"
+
+
+#define REG_DMA0SAD	*(vu32*)(REG_BASE + 0x0b0)
+#define REG_DMA0DAD	*(vu32*)(REG_BASE + 0x0b4)
+#define REG_DMA0CNT	*(vu32*)(REG_BASE + 0x0b8)
+
+#define REG_DMA1SAD	*(vu32*)(REG_BASE + 0x0bc)
+#define REG_DMA1DAD	*(vu32*)(REG_BASE + 0x0c0)
+#define REG_DMA1CNT	*(vu32*)(REG_BASE + 0x0c4)
+
+#define REG_DMA2SAD	*(vu32*)(REG_BASE + 0x0c8)
+#define REG_DMA2DAD	*(vu32*)(REG_BASE + 0x0cc)
+#define REG_DMA2CNT	*(vu32*)(REG_BASE + 0x0d0)
+
+#define REG_DMA3SAD	*(vu32*)(REG_BASE + 0x0d4)
+#define REG_DMA3DAD	*(vu32*)(REG_BASE + 0x0d8)
+#define REG_DMA3CNT	*(vu32*)(REG_BASE + 0x0dc)
+
+
+#define DMA_DST_INC		(0<<21)
+#define DMA_DST_DEC		(1<<21)
+#define DMA_DST_FIXED	(2<<21)
+#define DMA_DST_RELOAD	(3<<21)
+
+#define DMA_SRC_INC		(0<<23)
+#define DMA_SRC_DEC		(1<<23)
+#define DMA_SRC_FIXED	(2<<23)
+
+#define DMA_REPEAT		(1<<25)
+
+#define DMA16			(0<<26)
+#define DMA32			(1<<26)
+
+#define	GAMEPAK_DRQ		(1<<27)
+
+#define DMA_IMMEDIATE	(0<<28)
+#define DMA_VBLANK		(1<<28)
+#define DMA_HBLANK		(2<<28)
+#define DMA_SPECIAL		(3<<28)
+
+#define DMA_IRQ			(1<<30)
+#define DMA_ENABLE		(1<<31)
+
+#define DMA_Copy(channel, source, dest, mode) {\
+	REG_DMA##channel##SAD = (u32)(source);\
+	REG_DMA##channel##DAD = (u32)(dest);\
+	REG_DMA##channel##CNT = DMA_ENABLE | (mode); \
+}
+
+static inline void dmaCopy(const void * source, void * dest, u32 size) {
+	DMA_Copy(3, source, dest, DMA16 | size>>1);
+}
+
+#define	DMA0COPY( source, dest, mode) DMA_Copy(0,(source),(dest),(mode))
+#define	DMA1COPY( source, dest, mode) DMA_Copy(1,(source),(dest),(mode))
+#define	DMA2COPY( source, dest, mode) DMA_Copy(2,(source),(dest),(mode))
+#define	DMA3COPY( source, dest, mode) DMA_Copy(3,(source),(dest),(mode))
+
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+}	   // extern "C"
+#endif
+//---------------------------------------------------------------------------------
+#endif // _gba_dma_h_

package/src/platforms/gba/lib/libgba/include/gba_input.h

@@ -0,0 +1,127 @@
+/*
+
+	Header file for libgba input functions
+
+	Copyright 2003-2004 by Dave Murphy.
+
+	This library is free software; you can redistribute it and/or
+	modify it under the terms of the GNU Library General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later version.
+
+	This library is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+	Library General Public License for more details.
+
+	You should have received a copy of the GNU Library General Public
+	License along with this library; if not, write to the Free Software
+	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+	USA.
+
+	Please report all bugs and problems through the bug tracker at
+	"http://sourceforge.net/tracker/?group_id=114505&atid=668551".
+
+
+*/
+
+/*! \file gba_input.h
+    \brief gba inout support functions.
+
+*/
+
+//---------------------------------------------------------------------------------
+#ifndef _gba_input_h_
+#define _gba_input_h_
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+extern "C" {
+#endif
+//---------------------------------------------------------------------------------
+#include "gba_base.h"
+
+/*! \def REG_KEYINPUT
+
+    \brief Keypad status register.
+
+*/
+#define REG_KEYINPUT	*(vu16*)(REG_BASE + 0x130)  // Key Input
+/*! \def REG_KEYCNT
+
+    \brief Keypad interrupt control register.
+
+*/
+#define REG_KEYCNT		*(vu16*)(REG_BASE + 0x132)  // Key Control
+/*! \enum KEYPAD_BITS
+
+	\brief bit values for keypad buttons
+*/
+typedef enum KEYPAD_BITS {
+	KEY_A		=	(1<<0),	/*!< keypad A button */
+	KEY_B		=	(1<<1),	/*!< keypad B button */
+	KEY_SELECT	=	(1<<2),	/*!< keypad SELECT button */
+	KEY_START	=	(1<<3),	/*!< keypad START button */
+	KEY_RIGHT	=	(1<<4),	/*!< dpad RIGHT */
+	KEY_LEFT	=	(1<<5),	/*!< dpad LEFT */
+	KEY_UP		=	(1<<6),	/*!< dpad UP */
+	KEY_DOWN	=	(1<<7),	/*!< dpad DOWN */
+	KEY_R		=	(1<<8),	/*!< Right shoulder button */
+	KEY_L		=	(1<<9),	/*!< Left shoulder button */
+
+	KEYIRQ_ENABLE	=	(1<<14),	/*!< Enable keypad interrupt */
+	KEYIRQ_OR		=	(0<<15),	/*!< interrupt logical OR mode */
+	KEYIRQ_AND		=	(1<<15),	/*!< interrupt logical AND mode */
+	DPAD 		=	(KEY_UP | KEY_DOWN | KEY_LEFT | KEY_RIGHT) /*!< mask all dpad buttons */
+} KEYPAD_BITS;
+
+
+/*! \fn scanKeys()
+	\brief obtain the current keypad states.
+
+	Call this function once per main loop in order to use the keypad functions.
+*/
+void scanKeys(void);
+/*! \fn u16 keysDown()
+	\brief obtain the current keypad pressed state.
+
+	Returns the keys which have been pressed since the last call to KeysDown(), the keys are reset on this call.
+	Keys which are pressed will not be reported again until they are released.
+*/
+u16	keysDown();
+/*! \fn u16 keysDownRepeat()
+	\brief obtain the current keypad pressed state with repeat.
+
+*/
+u16	keysDownRepeat();
+/*! \fn u16 keysUp()
+	\brief obtain the current keypad released.
+
+	Returns the keys which have been pressed since the last call to KeysDown(), the keys are reset on this call.
+	Keys which are pressed will not be reported again until they have been held for the times specified using SetRepeat().
+*/
+u16 keysUp();
+/*! \fn u16 keysHeld()
+	\brief obtain the current keypad held state.
+
+	Returns the keys which have been pressed since the last call to KeysUp(), the keys are reset on this call.
+	Keys which are released will not be reported again until they are pressed.
+*/
+u16 keysHeld();
+
+
+/*! \fn setRepeat(int SetDelay, int SetRepeat)
+	\brief Set the repeat parameters for KeyDownRepeat.
+	\param SetDelay The count before the key starts to repeat
+	\param SetRepeat The count at which the key will repeat
+
+	The counts are updated on each call to ScanKeys(), the rates are dependent on how often that function is called.
+*/
+void setRepeat( int SetDelay, int SetRepeat);
+
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+	}	   // extern "C"
+#endif
+//---------------------------------------------------------------------------------
+#endif // _gba_input_h_
+//---------------------------------------------------------------------------------

package/src/platforms/gba/lib/libgba/include/gba_interrupt.h

@@ -0,0 +1,146 @@
+/*
+
+	Header file for libgba interrupt handling
+
+	Copyright 2003-2006 by Dave Murphy.
+
+	This library is free software; you can redistribute it and/or
+	modify it under the terms of the GNU Library General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later version.
+
+	This library is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+	Library General Public License for more details.
+
+	You should have received a copy of the GNU Library General Public
+	License along with this library; if not, write to the Free Software
+	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+	USA.
+
+	Please report all bugs and problems through the bug tracker at
+	"http://sourceforge.net/tracker/?group_id=114505&atid=668551".
+
+
+*/
+
+/*! \file gba_interrupt.h
+    \brief gba interrupt support.
+
+*/
+
+#ifndef _gba_interrupt_h_
+#define _gba_interrupt_h_
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+extern "C" {
+#endif
+//---------------------------------------------------------------------------------
+
+#include "gba_base.h"
+
+/*! \var typedef void ( * IntFn)(void)
+    \brief A type definition for an interrupt function pointer
+*/
+typedef void ( * IntFn)(void);
+
+struct IntTable{IntFn handler; u32 mask;};
+
+#define MAX_INTS	15
+
+#define INT_VECTOR	*(IntFn *)(0x03007ffc)		// BIOS Interrupt vector
+/*! \def REG_IME
+
+    \brief Interrupt Master Enable Register.
+
+	When bit 0 is clear, all interrupts are masked.  When it is 1,
+	interrupts will occur if not masked out in REG_IE.
+
+*/
+#define	REG_IME		*(vu16 *)(REG_BASE + 0x208)	// Interrupt Master Enable
+/*! \def REG_IE
+
+    \brief Interrupt Enable Register.
+
+	This is the activation mask for the internal interrupts.  Unless
+	the corresponding bit is set, the IRQ will be masked out.
+*/
+#define	REG_IE		*(vu16 *)(REG_BASE + 0x200)	// Interrupt Enable
+/*! \def REG_IF
+
+    \brief Interrupt Flag Register.
+
+	Since there is only one hardware interrupt vector, the IF register
+	contains flags to indicate when a particular of interrupt has occured.
+	To acknowledge processing interrupts, set IF to the value of the
+	interrupt handled.
+
+*/
+#define	REG_IF		*(vu16 *)(REG_BASE + 0x202)	// Interrupt Request
+
+//!  interrupt masks.
+/*!
+  These masks are used in conjuction with REG_IE to enable specific interrupts
+  and with REG_IF to acknowledge interrupts have been serviced.
+*/
+typedef enum irqMASKS {
+	IRQ_VBLANK	=	(1<<0),		/*!< vertical blank interrupt mask */
+	IRQ_HBLANK	=	(1<<1),		/*!< horizontal blank interrupt mask */
+	IRQ_VCOUNT	=	(1<<2),		/*!< vcount match interrupt mask */
+	IRQ_TIMER0	=	(1<<3),		/*!< timer 0 interrupt mask */
+	IRQ_TIMER1	=	(1<<4),		/*!< timer 1 interrupt mask */
+	IRQ_TIMER2	=	(1<<5),		/*!< timer 2 interrupt mask */
+	IRQ_TIMER3	=	(1<<6),		/*!< timer 3 interrupt mask */
+	IRQ_SERIAL	=	(1<<7),		/*!< serial interrupt mask */
+	IRQ_DMA0	=	(1<<8),		/*!< DMA 0 interrupt mask */
+	IRQ_DMA1	=	(1<<9),		/*!< DMA 1 interrupt mask */
+	IRQ_DMA2	=	(1<<10),	/*!< DMA 2 interrupt mask */
+	IRQ_DMA3	=	(1<<11),	/*!< DMA 3 interrupt mask */
+	IRQ_KEYPAD	=	(1<<12),	/*!< Keypad interrupt mask */
+	IRQ_GAMEPAK	=	(1<<13)		/*!< horizontal blank interrupt mask */
+} irqMASK;
+
+extern struct IntTable IntrTable[];
+
+/*! \fn void irqInit(void)
+    \brief initialises the gba interrupt code.
+
+*/
+void InitInterrupt(void) __attribute__ ((deprecated));
+void irqInit();
+
+/*! \fn IntFn *irqSet(irqMASK mask, IntFn function)
+    \brief sets the interrupt handler for a particular interrupt.
+
+	\param mask
+	\param function
+*/
+IntFn *SetInterrupt(irqMASK mask, IntFn function) __attribute__ ((deprecated));
+IntFn *irqSet(irqMASK mask, IntFn function);
+/*! \fn void irqEnable(int mask)
+    \brief allows an interrupt to occur.
+
+	\param mask
+*/
+void EnableInterrupt(irqMASK mask) __attribute__ ((deprecated));
+void irqEnable(int mask);
+
+/*! \fn void irqDisable(int mask)
+    \brief prevents an interrupt occuring.
+
+	\param mask
+*/
+void DisableInterrupt(irqMASK mask) __attribute__ ((deprecated));
+void irqDisable(int mask);
+
+void IntrMain();
+
+
+
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+}	   // extern "C"
+#endif
+//---------------------------------------------------------------------------------
+#endif // _gba_interrupt_h_

package/src/platforms/gba/lib/libgba/include/gba_multiboot.h

@@ -0,0 +1,72 @@
+/*
+
+	Header file for libgba multiboot definitions
+
+	Copyright 2003-2004 by Dave Murphy.
+
+	This library is free software; you can redistribute it and/or
+	modify it under the terms of the GNU Library General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later version.
+
+	This library is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+	Library General Public License for more details.
+
+	You should have received a copy of the GNU Library General Public
+	License along with this library; if not, write to the Free Software
+	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+	USA.
+
+	Please report all bugs and problems through the bug tracker at
+	"http://sourceforge.net/tracker/?group_id=114505&atid=668551".
+
+	
+
+*/
+
+//---------------------------------------------------------------------------------
+#ifndef	_gba_multiboot_h_
+#define	_gba_multiboot_h_
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+extern "C" {
+#endif
+//---------------------------------------------------------------------------------
+
+#include "gba_base.h"
+
+typedef	struct {
+	u32	reserved1[5];
+	u8	handshake_data;
+	u8	padding;
+	u16	handshake_timeout;
+	u8	probe_count;
+	u8	client_data[3];
+	u8	palette_data;
+	u8	response_bit;
+	u8	client_bit;
+	u8	reserved2;
+	u8	*boot_srcp;
+	u8	*boot_endp;
+	u8	*masterp;
+	u8	*reserved3[3];
+	u32	system_work2[4];
+	u8	sendflag;
+	u8	probe_target_bit;
+	u8	check_wait;
+	u8	server_type;
+} MultiBootParam;
+
+enum MULTIBOOT_MODES { MODE32_NORMAL, MODE16_MULTI, MODE32_2MHZ};
+
+u32 MultiBoot(MultiBootParam *mp, u32 mode);
+
+
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+}	   // extern "C"
+#endif
+//---------------------------------------------------------------------------------
+#endif //_gba_multiboot_h_

package/src/platforms/gba/lib/libgba/include/gba_sio.h

@@ -0,0 +1,124 @@
+/*
+
+	Header file for libgba serial communication functions
+
+	Copyright 2003-2004 by Dave Murphy.
+
+	This library is free software; you can redistribute it and/or
+	modify it under the terms of the GNU Library General Public
+	License as published by the Free Software Foundation; either
+	version 2 of the License, or (at your option) any later version.
+
+	This library is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+	Library General Public License for more details.
+
+	You should have received a copy of the GNU Library General Public
+	License along with this library; if not, write to the Free Software
+	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+	USA.
+
+	Please report all bugs and problems through the bug tracker at
+	"http://sourceforge.net/tracker/?group_id=114505&atid=668551".
+
+	
+
+*/
+
+//---------------------------------------------------------------------------------
+#ifndef	_gba_sio_h_
+#define	_gba_sio_h_
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+extern "C" {
+#endif
+//---------------------------------------------------------------------------------
+#include "gba_base.h"
+
+//---------------------------------------------------------------------------------
+// SIO mode control bits used with REG_SIOCNT
+//---------------------------------------------------------------------------------
+#define SIO_8BIT		0x0000	// Normal 8-bit communication mode
+#define SIO_32BIT		0x1000	// Normal 32-bit communication mode
+#define SIO_MULTI		0x2000	// Multi-play communication mode
+#define SIO_UART		0x3000	// UART communication mode
+#define SIO_IRQ			0x4000	// Enable serial irq
+
+
+//---------------------------------------------------------------------------------
+// baud rate settings
+//---------------------------------------------------------------------------------
+#define SIO_9600		0x0000
+#define SIO_38400		0x0001
+#define SIO_57600		0x0002
+#define SIO_115200		0x0003
+
+#define SIO_CLK_INT		(1<<0)	// Select internal clock
+#define SIO_2MHZ_CLK	(1<<1)	// Select 2MHz clock
+#define SIO_RDY			(1<<2)	// Opponent SO state
+#define SIO_SO_HIGH		(1<<3)	// Our SO state
+#define SIO_START		(1<<7)
+
+
+//---------------------------------------------------------------------------------
+// SIO modes set with REG_RCNT
+//---------------------------------------------------------------------------------
+#define R_NORMAL		0x0000
+#define R_MULTI			0x0000
+#define R_UART			0x0000
+#define R_GPIO			0x8000
+#define R_JOYBUS		0xC000
+
+//---------------------------------------------------------------------------------
+// General purpose mode control bits used with REG_RCNT
+//---------------------------------------------------------------------------------
+#define	GPIO_SC			0x0001	// Data
+#define	GPIO_SD			0x0002
+#define	GPIO_SI			0x0004
+#define	GPIO_SO			0x0008
+#define	GPIO_SC_IO		0x0010	// Select I/O
+#define	GPIO_SD_IO		0x0020
+#define	GPIO_SI_IO		0x0040
+#define	GPIO_SO_IO		0x0080
+#define	GPIO_SC_INPUT	0x0000	// Input setting
+#define GPIO_SD_INPUT	0x0000
+#define	GPIO_SI_INPUT	0x0000
+#define	GPIO_SO_INPUT	0x0000
+#define	GPIO_SC_OUTPUT	0x0010	// Output setting
+#define	GPIO_SD_OUTPUT	0x0020
+#define	GPIO_SI_OUTPUT	0x0040
+#define	GPIO_SO_OUTPUT	0x0080
+
+
+#define REG_SIOCNT		*(vu16*)(REG_BASE + 0x128)	// Serial Communication Control
+#define REG_SIODATA8	*(vu16*)(REG_BASE + 0x12a)	// 8bit Serial Communication Data
+#define REG_SIODATA32	*(vu32*)(REG_BASE + 0x120)	// 32bit Serial Communication Data
+#define REG_SIOMLT_SEND	*(vu16*)(REG_BASE + 0x12a)	// Multi-play SIO Send Data
+#define REG_SIOMLT_RECV	*(vu16*)(REG_BASE + 0x120)	// Multi-play SIO Receive Data
+#define REG_SIOMULTI0	*(vu16*)(REG_BASE + 0x120)	// Master data
+#define REG_SIOMULTI1	*(vu16*)(REG_BASE + 0x122)	// Slave 1 data
+#define REG_SIOMULTI2	*(vu16*)(REG_BASE + 0x124)	// Slave 2 data
+#define REG_SIOMULTI3	*(vu16*)(REG_BASE + 0x126)	// Slave 3 data
+
+#define REG_RCNT		*(vu16*)(REG_BASE + 0x134)	// SIO Mode Select/General Purpose Data
+
+#define REG_HS_CTRL		*(vu16*)(REG_BASE + 0x140)	// SIO JOY Bus Control
+
+#define REG_JOYRE		*(vu32*)(REG_BASE + 0x150)	// SIO JOY Bus Receive Data
+#define REG_JOYRE_L		*(vu16*)(REG_BASE + 0x150)
+#define REG_JOYRE_H		*(vu16*)(REG_BASE + 0x152)
+
+#define REG_JOYTR		*(vu32*)(REG_BASE + 0x154)	// SIO JOY Bus Transmit Data
+#define REG_JOYTR_L		*(vu16*)(REG_BASE + 0x154)
+#define REG_JOYTR_H		*(vu16*)(REG_BASE + 0x156)
+
+#define REG_JSTAT		*(vu16*)(REG_BASE + 0x158)	// SIO JOY Bus Receive Status
+
+
+//---------------------------------------------------------------------------------
+#ifdef __cplusplus
+}	   // extern "C"
+#endif
+//---------------------------------------------------------------------------------
+#endif // _gba_sio_h