romdevtools 0.13.0

package/src/platforms/gba/lib/libgba/gba_crt0.s

@@ -0,0 +1,258 @@
+/*--------------------------------------------------------------------------------
+	This Source Code Form is subject to the terms of the Mozilla Public License,
+	v. 2.0. If a copy of the MPL was not distributed with this file, You can
+	obtain one at https://mozilla.org/MPL/2.0/.
+--------------------------------------------------------------------------------*/
+
+	.section	".crt0","ax"
+	.global     _start
+	.align
+
+	.arm
+	.cpu arm7tdmi
+
+@---------------------------------------------------------------------------------
+_start:
+@---------------------------------------------------------------------------------
+	b	rom_header_end
+
+	.fill   156,1,0			@ Nintendo Logo Character Data (8000004h)
+	.fill	16,1,0			@ Game Title
+	.byte   0x30,0x31		@ Maker Code (80000B0h)
+	.byte   0x96			@ Fixed Value (80000B2h)
+	.byte   0x00			@ Main Unit Code (80000B3h)
+	.byte   0x00			@ Device Type (80000B4h)
+	.fill	7,1,0			@ unused
+	.byte	0x00			@ Software Version No (80000BCh)
+	.byte	0xf0			@ Complement Check (80000BDh)
+	.byte	0x00,0x00    		@ Checksum (80000BEh)
+
+@---------------------------------------------------------------------------------
+rom_header_end:
+@---------------------------------------------------------------------------------
+	b	start_vector			@ This branch must be here for proper
+						@ positioning of the following header.
+
+	.GLOBAL	__boot_method, __slave_number
+@---------------------------------------------------------------------------------
+__boot_method:
+@---------------------------------------------------------------------------------
+	.byte   0				@ boot method (0=ROM boot, 3=Multiplay boot)
+@---------------------------------------------------------------------------------
+__slave_number:
+@---------------------------------------------------------------------------------
+	.byte   0				@ slave # (1=slave#1, 2=slave#2, 3=slave#3)
+
+	.byte   0 				@ reserved
+	.byte   0 				@ reserved
+	.word   0    				@ reserved
+	.word   0				@ reserved
+	.word   0    				@ reserved
+	.word   0    				@ reserved
+	.word   0    				@ reserved
+	.word   0    				@ reserved
+
+	.global     start_vector
+	.align
+@---------------------------------------------------------------------------------
+start_vector:
+@---------------------------------------------------------------------------------
+	mov	r0, #0x4000000			@ REG_BASE
+	str	r0, [r0, #0x208]
+
+	mov	r0, #0x12			@ Switch to IRQ Mode
+	msr	cpsr, r0
+	ldr	sp, =__sp_irq			@ Set IRQ stack
+	mov	r0, #0x1f			@ Switch to System Mode
+	msr	cpsr, r0
+	ldr	sp, =__sp_usr			@ Set user stack
+
+@---------------------------------------------------------------------------------
+@ Enter Thumb mode
+@---------------------------------------------------------------------------------
+	add	r0, pc, #1
+	bx	r0
+
+	.thumb
+
+	ldr	r0, =__text_start
+	lsl	r0, #5				@ Was code compiled at 0x08000000 or higher?
+	bcs     DoEWRAMClear			@ yes, you can not run it in external WRAM
+
+	mov     r0, pc
+	lsl     r0, #5				@ Are we running from ROM (0x8000000 or higher) ?
+	bcc     SkipEWRAMClear			@ No, so no need to do a copy.
+
+@---------------------------------------------------------------------------------
+@ We were started in ROM, silly emulators. :P
+@ So we need to copy to ExWRAM.
+@---------------------------------------------------------------------------------
+	mov	r2, #2
+	lsl	r2, r2, #24			@ r2= 0x02000000
+	ldr	r3, =__end__			@ last ewram address
+	sub	r3, r2				@ r3= actual binary size
+	mov	r6, r2				@ r6= 0x02000000
+	lsl	r1, r2, #2			@ r1= 0x08000000
+
+	bl	CopyMem
+
+	bx	r6				@ Jump to the code to execute
+
+@---------------------------------------------------------------------------------
+DoEWRAMClear:					@ Clear External WRAM to 0x00
+@---------------------------------------------------------------------------------
+	mov	r1, #0x40
+	lsl	r1, #12				@ r1 = 0x40000
+	lsl	r0, r1, #7			@ r0 = 0x2000000
+	bl	ClearMem
+
+@---------------------------------------------------------------------------------
+SkipEWRAMClear:					@ Clear Internal WRAM to 0x00
+@---------------------------------------------------------------------------------
+
+@---------------------------------------------------------------------------------
+@ Clear BSS section to 0x00
+@---------------------------------------------------------------------------------
+	ldr	r0, =__bss_start__
+	ldr	r1, =__bss_end__
+	sub	r1, r0
+	bl	ClearMem
+
+@---------------------------------------------------------------------------------
+@ Clear SBSS section to 0x00
+@---------------------------------------------------------------------------------
+	ldr	r0, =__sbss_start__
+	ldr	r1, =__sbss_end__
+	sub	r1, r0
+	bl	ClearMem
+
+@---------------------------------------------------------------------------------
+@ Copy initialized data (data section) from LMA to VMA (ROM to RAM)
+@---------------------------------------------------------------------------------
+	ldr	r1, =__data_lma
+	ldr	r2, =__data_start__
+	ldr	r4, =__data_end__
+	bl	CopyMemChk
+
+@---------------------------------------------------------------------------------
+@ Copy internal work ram (iwram section) from LMA to VMA (ROM to RAM)
+@---------------------------------------------------------------------------------
+	ldr	r1,= __iwram_lma
+	ldr	r2,= __iwram_start__
+	ldr	r4,= __iwram_end__
+	bl	CopyMemChk
+
+@---------------------------------------------------------------------------------
+@ Copy internal work ram overlay 0 (iwram0 section) from LMA to VMA (ROM to RAM)
+@---------------------------------------------------------------------------------
+	ldr	r2,= __load_stop_iwram0
+	ldr	r1,= __load_start_iwram0
+	sub	r3, r2, r1			@ Is there any data to copy?
+	beq	CIW0Skip			@ no
+
+	ldr	r2,= __iwram_overlay_start
+	bl	CopyMem
+@---------------------------------------------------------------------------------
+CIW0Skip:
+@---------------------------------------------------------------------------------
+@ Copy external work ram (ewram section) from LMA to VMA (ROM to RAM)
+@---------------------------------------------------------------------------------
+	ldr	r1, =__ewram_lma
+	ldr	r2, =__ewram_start
+	ldr	r4, =__ewram_end
+	bl	CopyMemChk
+
+@---------------------------------------------------------------------------------
+CEW0Skip:
+@---------------------------------------------------------------------------------
+@ set heap end
+@---------------------------------------------------------------------------------
+	ldr	r1, =fake_heap_end
+	ldr	r0, =__eheap_end
+	str	r0, [r1]
+@---------------------------------------------------------------------------------
+@ global constructors
+@---------------------------------------------------------------------------------
+	ldr	r3, =__libc_init_array
+	bl	_blx_r3_stub
+@---------------------------------------------------------------------------------
+@ Jump to user code
+@---------------------------------------------------------------------------------
+	mov	r0, #0				@ int argc
+	mov	r1, #0				@ char	*argv[]
+	ldr	r3, =main
+	bl	_blx_r3_stub
+
+	swi	#0x00				@ SoftReset
+
+@---------------------------------------------------------------------------------
+@ Clear memory to 0x00 if length != 0
+@---------------------------------------------------------------------------------
+@ r0 = Start Address
+@ r1 = Length
+@---------------------------------------------------------------------------------
+ClearMem:
+@---------------------------------------------------------------------------------
+	mov	r2,#3				@ These	commands are used in cases where
+	add	r1,r2				@ the length is	not a multiple of 4,
+	bic	r1,r2				@ even though it should be.
+
+	beq	ClearMX				@ Length is zero so exit
+
+	mov	r2,#0
+@---------------------------------------------------------------------------------
+ClrLoop:
+@---------------------------------------------------------------------------------
+	stmia	r0!, {r2}
+	sub	r1,#4
+	bne	ClrLoop
+@---------------------------------------------------------------------------------
+ClearMX:
+@---------------------------------------------------------------------------------
+	bx	lr
+
+@---------------------------------------------------------------------------------
+_blx_r3_stub:
+@---------------------------------------------------------------------------------
+	bx	r3
+
+@---------------------------------------------------------------------------------
+@ Copy memory if length	!= 0
+@---------------------------------------------------------------------------------
+@ r1 = Source Address
+@ r2 = Dest Address
+@ r4 = Dest Address + Length
+@---------------------------------------------------------------------------------
+CopyMemChk:
+@---------------------------------------------------------------------------------
+	sub	r3, r4, r2			@ Is there any data to copy?
+@---------------------------------------------------------------------------------
+@ Copy memory
+@---------------------------------------------------------------------------------
+@ r1 = Source Address
+@ r2 = Dest Address
+@ r3 = Length
+@---------------------------------------------------------------------------------
+CopyMem:
+@---------------------------------------------------------------------------------
+	mov	r0, #3				@ These commands are used in cases where
+	add	r3, r0				@ the length is not a multiple	of 4,
+	bic	r3, r0				@ even	though it should be.
+	beq	CIDExit				@ Length is zero so exit
+
+@---------------------------------------------------------------------------------
+CIDLoop:
+@---------------------------------------------------------------------------------
+	ldmia	r1!, {r0}
+	stmia	r2!, {r0}
+	sub	r3, #4
+	bne	CIDLoop
+@---------------------------------------------------------------------------------
+CIDExit:
+@---------------------------------------------------------------------------------
+	bx	lr
+
+	.align
+	.pool
+	.end
+

package/src/platforms/gba/lib/libgba/include/BoyScout.h

@@ -0,0 +1,128 @@
+//////////////////////////////////////////////////////////////////////////
+// File: BoyScout.h                                                     //
+//                                                                      //
+// Description: Header file for BoyScout music playback on the GameBoy. //
+//                                                                      //
+// Author: Christer Andersson (c) 2001                                  //
+// Addon:  Willem Kokke                                                 //
+//                                                                      //
+//////////////////////////////////////////////////////////////////////////
+
+//////////////////////////////////////////////////////////////
+// New section of functions were written by Willem Kokke.   //
+// He also fixed a silly miss in the wave RAM copy of the   //
+// v.0.93 playback libraries. Thanks alot mate :O)          //
+//                                                          //
+// / Christer                                               //
+//////////////////////////////////////////////////////////////
+
+// Make sure header is only included once
+#ifndef HEADER_BOYSCOUT_H
+#define HEADER_BOYSCOUT_H
+
+// DEFINES ////////
+
+#define PATTERN_PARAMETER_EMPTY	10000
+
+#define SOUND_CHANNEL_COUNT		4
+
+#define SOUND1_PARAMETER_COUNT	7
+#define SOUND2_PARAMETER_COUNT	5
+#define SOUND3_PARAMETER_COUNT	4
+#define SOUND4_PARAMETER_COUNT	7
+
+// Play states
+#define PLAYSTATE_STOP		1
+#define PLAYSTATE_PLAY		2
+#define PLAYSTATE_LOOP		4
+
+
+// STRUCTS ////////
+
+// Iterator for traversing compressed data
+typedef struct SRLEIterator
+{
+	unsigned char *pData;
+	unsigned char iValue;
+	unsigned char mask;
+	unsigned char cValue;
+	short nValue;
+	unsigned char iValuePos;
+} SRLEIterator;
+
+// Sound 1 pattern
+typedef struct
+{
+	unsigned short nLength;
+	unsigned char *apParams[SOUND1_PARAMETER_COUNT];
+} SSound1Pattern;
+
+// Sound 2 pattern
+typedef struct
+{
+	unsigned short nLength;
+	unsigned char *apParams[SOUND2_PARAMETER_COUNT];
+} SSound2Pattern;
+
+// Sound 3 pattern
+typedef struct
+{
+	unsigned short nLength;
+	unsigned char *apParams[SOUND3_PARAMETER_COUNT];
+} SSound3Pattern;
+
+// Sound 4 pattern
+typedef struct
+{
+	unsigned short nLength;
+	unsigned char *apParams[SOUND4_PARAMETER_COUNT];
+} SSound4Pattern;
+
+// PROTOTYPES /////
+
+void RLEISet(unsigned char *pData, SRLEIterator *pRLEIterator);
+void RLEINext(SRLEIterator *pRLEIterator);
+
+void BoyScoutInitialize();
+void BoyScoutOpenSong(const unsigned char *pSongData);
+void BoyScoutPlaySong(int nLoop);
+void BoyScoutStopSong();
+unsigned short BoyScoutGetNeededSongMemory(const unsigned char *pSongData);
+void BoyScoutSetMemoryArea(unsigned int nMemoryAddress);
+unsigned int BoyScoutGetMemoryArea();
+int BoyScoutUpdateSong();
+
+void DMA3Copy32(unsigned int Src, unsigned int Dst, unsigned short Count);
+
+// WK Set to 1 to use dma, or to 0 to use software copy
+// Software copy is the preffered option, it's faster and more stable
+#define USE_DMA 0
+
+// WK  some functions to manipulate the speed of the original song
+// You directly manipulate the time a beat takes
+// a beat takes x/60, where x is the value you give
+// increasing this value slows the song down, decreasing speeds it up
+
+// TODO?  move the timing to a timer to get a better control through increades granularity
+
+unsigned char BoyScoutGetNormalSpeed();
+unsigned char BoyScoutGetSpeed();
+
+void BoyScoutIncSpeed(unsigned char speed);
+void BoyScoutDecSpeed(unsigned char speed);
+void BoyScoutSetSpeed(unsigned char speed);
+
+
+// WK  some functions to mute individual channels
+void BoyScoutMuteChannel1(int mute);
+void BoyScoutMuteChannel2(int mute);
+void BoyScoutMuteChannel3(int mute);
+void BoyScoutMuteChannel4(int mute);
+
+#endif
+
+
+
+
+
+

package/src/platforms/gba/lib/libgba/include/disc.h

@@ -0,0 +1,36 @@
+/*
+ disc.h
+
+ Copyright (c) 2008 Michael "Chishm" Chisholm
+	
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation and/or
+     other materials provided with the distribution.
+  3. The name of the author may not be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+#ifndef GBA_DISC_INCLUDE
+#define GBA_DISC_INCLUDE
+
+#include "disc_io.h"
+
+extern const DISC_INTERFACE* discGetInterface (void);
+
+#endif // GBA_DISC_INCLUDE

package/src/platforms/gba/lib/libgba/include/disc_io.h

@@ -0,0 +1,64 @@
+/*
+ disc_io.h
+ Interface template for low level disc functions.
+
+ Copyright (c) 2006 Michael "Chishm" Chisholm
+ Based on code originally written by MightyMax
+	
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation and/or
+     other materials provided with the distribution.
+  3. The name of the author may not be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef GBA_DISC_IO_INCLUDE
+#define GBA_DISC_IO_INCLUDE
+
+#include "gba_types.h"
+#include <stdint.h>
+#include <sys/types.h>
+
+#define FEATURE_MEDIUM_CANREAD		0x00000001
+#define FEATURE_MEDIUM_CANWRITE		0x00000002
+#define FEATURE_SLOT_GBA			0x00000010
+#define FEATURE_SLOT_NDS			0x00000020
+
+typedef uint32_t sec_t;
+
+typedef bool (* FN_MEDIUM_STARTUP)(void) ;
+typedef bool (* FN_MEDIUM_ISINSERTED)(void) ;
+typedef bool (* FN_MEDIUM_READSECTORS)(sec_t sector, sec_t numSectors, void* buffer) ;
+typedef bool (* FN_MEDIUM_WRITESECTORS)(sec_t sector, sec_t numSectors, const void* buffer) ;
+typedef bool (* FN_MEDIUM_CLEARSTATUS)(void) ;
+typedef bool (* FN_MEDIUM_SHUTDOWN)(void) ;
+
+struct DISC_INTERFACE_STRUCT {
+	unsigned long			ioType ;
+	unsigned long			features ;
+	FN_MEDIUM_STARTUP		startup ;
+	FN_MEDIUM_ISINSERTED	isInserted ;
+	FN_MEDIUM_READSECTORS	readSectors ;
+	FN_MEDIUM_WRITESECTORS	writeSectors ;
+	FN_MEDIUM_CLEARSTATUS	clearStatus ;
+	FN_MEDIUM_SHUTDOWN		shutdown ;
+} ;
+
+typedef struct DISC_INTERFACE_STRUCT DISC_INTERFACE ;
+
+#endif	// define GBA_DISC_IO_INCLUDE

package/src/platforms/gba/lib/libgba/include/dldi.h

@@ -0,0 +1,112 @@
+/*
+ dldi.h
+
+ Copyright (c) 2006 Michael "Chishm" Chisholm
+	
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+  1. Redistributions of source code must retain the above copyright notice,
+     this list of conditions and the following disclaimer.
+  2. Redistributions in binary form must reproduce the above copyright notice,
+     this list of conditions and the following disclaimer in the documentation and/or
+     other materials provided with the distribution.
+  3. The name of the author may not be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+#ifndef GBA_DLDI_INCLUDE
+#define GBA_DLDI_INCLUDE
+
+#include "disc_io.h"
+
+#define FIX_ALL						0x01
+#define FIX_GLUE					0x02
+#define FIX_GOT						0x04
+#define FIX_BSS						0x08
+
+#define DLDI_MAGIC_STRING_LEN 		8
+#define DLDI_FRIENDLY_NAME_LEN 		48
+
+extern const u32  DLDI_MAGIC_NUMBER;
+
+// I/O interface with DLDI extensions
+typedef struct {
+	u32 	magicNumber;
+	char	magicString [DLDI_MAGIC_STRING_LEN];
+	u8		versionNumber;
+	u8		driverSize;			// log-2 of driver size in bytes
+	u8		fixSectionsFlags;
+	u8		allocatedSize;		// log-2 of the allocated space in bytes
+
+	char	friendlyName [DLDI_FRIENDLY_NAME_LEN];
+	
+	// Pointers to sections that need address fixing
+	void*	dldiStart;
+	void*	dldiEnd;
+	void*	interworkStart;
+	void*	interworkEnd;
+	void*	gotStart;
+	void*	gotEnd;
+	void*	bssStart;
+	void*	bssEnd;
+	
+	// Original I/O interface data
+	DISC_INTERFACE ioInterface;
+} DLDI_INTERFACE;
+
+
+/*
+Pointer to the internal DLDI, not directly usable by libfat.
+You'll need to set the bus permissions appropriately before using.
+*/
+extern const DLDI_INTERFACE* io_dldi_data;
+
+/*
+Return a pointer to the internal IO interface, 
+setting up bus permissions in the process.
+*/
+extern const DISC_INTERFACE* dldiGetInternal (void);
+
+/*
+Determines if an IO driver is a valid DLDI driver
+*/
+extern bool dldiIsValid (const DLDI_INTERFACE* io);
+
+/* 
+Adjust the pointer addresses within a DLDI driver
+*/
+extern void dldiFixDriverAddresses (DLDI_INTERFACE* io);
+
+/*
+Load a DLDI from disc and set up the bus permissions.
+This returns a type not directly usable in libfat,
+but it does give extra information, such as a friendly name.
+To use in libfat:
+const DLDI_INTERFACE* loadedDldi = dldi_loadFromFile ("file");
+loadedDldi->ioInterface.startup();
+fatMount(&loadedDldi->ioInterface, "devname", 0);
+*/
+extern DLDI_INTERFACE* dldiLoadFromFile (const char* path);
+
+/* 
+Free resources used by a loaded DLDI. 
+Remember to unmount and shutdown first:
+fatUnmount("devname");
+loadedDldi->ioInterface.shutdown();
+dldiFree(loadedDldi);
+*/
+extern void dldiFree (DLDI_INTERFACE* dldi);
+
+#endif // GBA_DLDI_INCLUDE