iobroker.poolcontrol 1.3.30 → 1.3.32

package/admin/i18n/it/translations.json

@@ -1,158 +0,0 @@
-{
-  "0.5x": "0,5x",
-  "1.0x": "1.0x",
-  "1.5x": "1,5x",
-  "2.0x": "2.0x",
-  "2.5x": "2,5x",
-  "3.0x": "3.0x",
-  "Additional Actuators": "Attuatori aggiuntivi",
-  "Additional actuators (valves, lighting & auxiliary pumps)": "Attuatori aggiuntivi (valvole, illuminazione e pompe ausiliarie)",
-  "Alexa device": "Dispositivo Alexa",
-  "All text and speech outputs of the adapter – including AI forecasts, warnings, pump status, solar hints and diagnostic messages – are emitted via the central 'speech.queue' datapoint. This datapoint should be used for VIS displays, Alexa or Telegram outputs.": "Tutti gli output di testo e vocali dell'adattatore, comprese previsioni AI, avvisi, stato della pompa, suggerimenti solari e messaggi diagnostici, vengono emessi tramite il datapoint centrale \"speech.queue\". Questo punto dati dovrebbe essere utilizzato per i display VIS, gli output Alexa o Telegram.",
-  "Amazon Alexa": "AmazonAlexa",
-  "Announce / Notify on Warning": "Annuncia/notifica in caso di avviso",
-  "Announce error messages": "Annunciare messaggi di errore",
-  "Auxiliary pump 1 active": "Pompa ausiliaria 1 attiva",
-  "Auxiliary pump 2 active": "Pompa ausiliaria 2 attiva",
-  "Auxiliary pump 3 active": "Pompa ausiliaria 3 attiva",
-  "Auxiliary pumps & attractions": "Pompe ausiliarie e attrazioni",
-  "Central speech output (speech.queue)": "Output vocale centrale (speech.queue)",
-  "Collector Temperature Off Threshold (°C)": "Soglia temperatura collettore disattivata (°C)",
-  "Collector Temperature On Threshold (°C)": "Soglia temperatura collettore (°C)",
-  "Collector Temperature Warning": "Avviso temperatura collettore",
-  "Collector Temperature Warning Threshold (°C)": "Soglia di avviso temperatura collettore (°C)",
-  "Consumption and cost calculation": "Calcolo dei consumi e dei costi",
-  "Datapoint containing current PV power (Watts)": "Punto dati contenente la potenza FV attuale (Watt)",
-  "Datapoint containing current house consumption (Watts)": "Datapoint contenente il consumo attuale della casa (Watt)",
-  "Default (female)": "Predefinito (femmina)",
-  "Difference between PV generation and house consumption that counts as surplus": "Differenza tra produzione fotovoltaica e consumo domestico che conta come surplus",
-  "Electricity price (€ / kWh)": "Prezzo dell'elettricità (€/kWh)",
-  "Email adapter instance": "Istanza dell'adattatore di posta elettronica",
-  "Email subject": "Oggetto dell'e-mail",
-  "Enable Alexa output": "Abilita l'uscita Alexa",
-  "Enable Collector Temperature Warning": "Abilita l'avviso temperatura collettore",
-  "Enable Frost Protection": "Abilita la protezione antigelo",
-  "Enable Heating Control": "Abilita il controllo del riscaldamento",
-  "Enable Solar Control": "Abilita il controllo solare",
-  "Enable Telegram output": "Abilita l'uscita telegramma",
-  "Enable Time Window 1": "Abilita finestra temporale 1",
-  "Enable Time Window 2": "Abilita finestra temporale 2",
-  "Enable Time Window 3": "Abilita finestra temporale 3",
-  "Enable consumption and cost calculation": "Abilita il calcolo dei consumi e dei costi",
-  "Enable email output": "Abilita l'output della posta elettronica",
-  "Enable safety functions also in 'Manual' mode": "Abilita le funzioni di sicurezza anche in modalità 'Manuale'",
-  "Enable speech output": "Abilita l'output vocale",
-  "End (HH:MM)": "Fine (OO:MM)",
-  "Example: Dirk,Dennis (empty = send to all users)": "Esempio: Dirk,Dennis (vuoto = invia a tutti gli utenti)",
-  "Friday": "Venerdì",
-  "Frost Protection": "Protezione antigelo",
-  "Frost Protection Temperature (°C)": "Temperatura di protezione antigelo (°C)",
-  "General": "Generale",
-  "General Pool Settings": "Impostazioni generali della piscina",
-  "General Settings": "Impostazioni generali",
-  "Heating / Heat Pump": "Riscaldamento / Pompa di calore",
-  "Help & Info": "Aiuto e informazioni",
-  "Help and Information": "Aiuto e informazioni",
-  "Here you will find the complete documentation and information about all settings. Additional information about future versions will follow.": "Qui troverete la documentazione completa e le informazioni su tutte le impostazioni. Seguiranno ulteriori informazioni sulle versioni future.",
-  "Hysteresis": "Isteresi",
-  "If enabled, safety functions such as frost protection and overheating protection (solar) remain active.": "Se abilitate, le funzioni di sicurezza come la protezione antigelo e la protezione dal surriscaldamento (solare) rimangono attive.",
-  "Important information about the AI system": "Informazioni importanti sul sistema AI",
-  "Internet access & data protection": "Accesso a Internet e protezione dei dati",
-  "Lighting": "Illuminazione",
-  "Lighting 1 active": "Illuminazione 1 attiva",
-  "Lighting 2 active": "Illuminazione 2 attiva",
-  "Lighting 3 active": "Illuminazione 3 attiva",
-  "Logical Control State (true / false)": "Stato del controllo logico (vero/falso)",
-  "Mail": "Posta",
-  "Male": "Maschio",
-  "Many automatic features (e.g. solar control, photovoltaic mode, AI weather logic and diagnostic functions) only operate when the pool season is active. The season status can be changed at any time via the 'status.season_active' datapoint or your visualization. The instance configuration only provides the initial value when the datapoint is created for the first time.": "Molte funzionalità automatiche (ad esempio controllo solare, modalità fotovoltaica, logica meteorologica AI e funzioni diagnostiche) funzionano solo quando la stagione della piscina è attiva. Lo stato della stagione può essere modificato in qualsiasi momento tramite il datapoint 'status.season_active' o la tua visualizzazione. La configurazione dell'istanza fornisce il valore iniziale solo quando il datapoint viene creato per la prima volta.",
-  "Max Power (Watt)": "Potenza massima (Watt)",
-  "Maximum Pool Temperature (°C – Safety Cutoff)": "Temperatura massima della piscina (°C – Interruzione di sicurezza)",
-  "Minimum Circulation per Day": "Circolazione minima al giorno",
-  "Monday": "Lunedi",
-  "Name Auxiliary pump 1": "Nome Pompa ausiliaria 1",
-  "Name Auxiliary pump 2": "Nome Pompa ausiliaria 2",
-  "Name Auxiliary pump 3": "Nome Pompa ausiliaria 3",
-  "Name Lighting 1": "Nome Illuminazione 1",
-  "Name Lighting 2": "Nome Illuminazione 2",
-  "Name Lighting 3": "Nome Illuminazione 3",
-  "Note about pool season": "Nota sulla stagione della piscina",
-  "Note: An external kWh meter is required for consumption calculation (e.g. smart plug).": "Nota: per il calcolo del consumo è necessario un contatore kWh esterno (ad esempio smart plug).",
-  "Note: Heating control is temperature-driven and only active during pool season. Depending on the selected control type, either a smart plug is switched or a logical control state (true/false) is set.": "Nota: il controllo del riscaldamento è basato sulla temperatura ed è attivo solo durante la stagione della piscina. A seconda del tipo di controllo selezionato, viene commutata una presa intelligente oppure viene impostato uno stato di controllo logico (vero/falso).",
-  "Note: Supports external sensors as well as the PoolControl pressure box.": "Nota: supporta sensori esterni e la scatola di pressione PoolControl.",
-  "Note: The AI features are completely optional and can be disabled at any time via the 'ai.enabled' datapoint. Weather features (e.g. weather hints, pool tips, forecast for tomorrow) can also be individually enabled or disabled via 'ai.weather.switches.*'. The adapter uses the Open-Meteo service to generate weather data. For this, the geo-coordinates stored in ioBroker (latitude and longitude from system.config) are required.": "Nota: le funzionalità AI sono completamente opzionali e possono essere disabilitate in qualsiasi momento tramite il datapoint \"ai.enabled\". Le funzionalità meteo (ad esempio suggerimenti meteo, consigli sulla piscina, previsioni per domani) possono anche essere abilitate o disabilitate individualmente tramite \"ai.weather.switches.*\". L'adattatore utilizza il servizio Open-Meteo per generare dati meteorologici. Per questo sono necessarie le coordinate geografiche memorizzate in ioBroker (latitudine e longitudine da system.config).",
-  "Note: The warning resets automatically once the temperature drops 10% below the configured threshold.": "Nota: l'avviso si ripristina automaticamente quando la temperatura scende del 10% al di sotto della soglia configurata.",
-  "Note: These settings are mainly used as initial values when PoolControl is set up for the first time. Later operation should be done via the PoolControl datapoints or your visualization. Existing runtime datapoints are not overwritten on adapter restart.": "Nota: queste impostazioni vengono utilizzate principalmente come valori iniziali quando PoolControl viene configurato per la prima volta. Le operazioni successive dovrebbero essere eseguite tramite i datapoint PoolControl o la visualizzazione. I datapoint di runtime esistenti non vengono sovrascritti al riavvio dell'adattatore.",
-  "Object ID Auxiliary pump 1": "ID oggetto Pompa ausiliaria 1",
-  "Object ID Auxiliary pump 2": "ID oggetto Pompa ausiliaria 2",
-  "Object ID Auxiliary pump 3": "ID oggetto Pompa ausiliaria 3",
-  "Object ID Collector Sensor": "Sensore raccoglitore ID oggetto",
-  "Object ID Current Power (W)": "ID oggetto Potenza attuale (W)",
-  "Object ID Flow Sensor": "Sensore di flusso ID oggetto",
-  "Object ID Ground Sensor": "Sensore di terra ID oggetto",
-  "Object ID Heating / Heat Pump": "ID oggetto Riscaldamento/Pompa di calore",
-  "Object ID Lighting 1": "Illuminazione ID oggetto 1",
-  "Object ID Lighting 2": "Illuminazione ID oggetto 2",
-  "Object ID Lighting 3": "Illuminazione ID oggetto 3",
-  "Object ID Outside Temperature Sensor": "ID oggetto Sensore temperatura esterna",
-  "Object ID PV generation power (W)": "ID oggetto Potenza di generazione FV (W)",
-  "Object ID Pressure Sensor (bar)": "Sensore di pressione ID oggetto (bar)",
-  "Object ID Pump Switch Socket": "Presa interruttore pompa ID oggetto",
-  "Object ID Return Sensor": "Sensore di restituzione dell'ID oggetto",
-  "Object ID Surface Sensor": "Sensore di superficie ID oggetto",
-  "Object ID external kWh meter": "ID oggetto contatore kWh esterno",
-  "Object ID house consumption (W)": "Consumo domestico ID oggetto (W)",
-  "Open documentation (English) on GitHub": "Apri la documentazione (inglese) su GitHub",
-  "Open documentation (German) on GitHub": "Apri la documentazione (tedesco) su GitHub",
-  "Optional additional actuators can be configured here. Actuators are only created in the adapter if they are explicitly enabled.": "Qui è possibile configurare attuatori aggiuntivi opzionali. Gli attuatori vengono creati nell'adattatore solo se sono abilitati esplicitamente.",
-  "PV, Consumption & Costs": "Fotovoltaico, Consumi e Costi",
-  "Photovoltaics (Surplus detection)": "Fotovoltaico (Rilevamento Eccedenze)",
-  "Pool Name": "Nome della piscina",
-  "Pool Season Active": "Stagione della piscina attiva",
-  "Pool Size (Liters)": "Dimensioni della piscina (litri)",
-  "Pressure Sensor (Filter Pressure)": "Sensore di pressione (pressione del filtro)",
-  "Pump": "Pompa",
-  "Pump Data Points (Smart Socket & Current Power Consumption)": "Punti dati della pompa (presa intelligente e consumo energetico attuale)",
-  "Pump Flow Rate (l/h)": "Portata della pompa (l/h)",
-  "Pump Settings (Rated Power)": "Impostazioni della pompa (potenza nominale)",
-  "Pump mode (Auto/Manual/Off/Timer) can be controlled via data point 'pump.mode'.": "La modalità pompa (Auto/Manuale/Off/Timer) può essere controllata tramite il punto dati 'pump.mode'.",
-  "Recipient address": "Indirizzo del destinatario",
-  "Safety Functions": "Funzioni di sicurezza",
-  "Saturday": "Sabato",
-  "Season Settings": "Impostazioni della stagione",
-  "Solar / Heating Control": "Controllo solare/riscaldamento",
-  "Speech Output": "Uscita vocale",
-  "Start (HH:MM)": "Inizio (OO:MM)",
-  "Sunday": "Domenica",
-  "Switch Smart Plug (On / Off)": "Commuta Smart Plug (acceso/spento)",
-  "Target Pool Temperature (°C)": "Temperatura target della piscina (°C)",
-  "Telegram": "Telegramma",
-  "Telegram instance": "Istanza di Telegram",
-  "Telegram recipients (usernames, comma separated / empty = send to all users)": "Destinatari di Telegram (nomi utente, separati da virgole/vuoto = invia a tutti gli utenti)",
-  "Temperature Management": "Gestione della temperatura",
-  "Temperature Sensors": "Sensori di temperatura",
-  "Temperature threshold for announcement (°C)": "Soglia di temperatura per l'annuncio (°C)",
-  "The AI system (aiHelper & aiForecastHelper) retrieves weather data from Open-Meteo via HTTPS. It uses the geo-coordinates from the ioBroker system configuration (system.config › latitude/longitude). No data is stored or transmitted to third parties. Without valid geo-coordinates, the AI system cannot generate forecasts.": "Il sistema AI (aiHelper e aiForecastHelper) recupera i dati meteorologici da Open-Meteo tramite HTTPS. Utilizza le coordinate geografiche dalla configurazione del sistema ioBroker (system.config › latitudine/longitudine). Nessun dato viene memorizzato o trasmesso a terzi. Senza coordinate geografiche valide, il sistema AI non può generare previsioni.",
-  "The PoolControl adapter works completely locally by default. Currently, only the AI features access weather data from Open-Meteo via encrypted HTTPS. Only the geo-coordinates stored in ioBroker (latitude and longitude) are transmitted. No additional data is stored or sent to third parties. Future optional internet services may be added, but they will always be clearly marked.": "Per impostazione predefinita, l'adattatore PoolControl funziona completamente localmente. Attualmente, solo le funzionalità AI accedono ai dati meteorologici da Open-Meteo tramite HTTPS crittografato. Vengono trasmesse solo le coordinate geografiche memorizzate in ioBroker (latitudine e longitudine). Nessun dato aggiuntivo viene memorizzato o inviato a terzi. Potranno essere aggiunti futuri servizi internet opzionali, ma saranno sempre chiaramente segnalati.",
-  "These warning values are used as initial values when the datapoints are created for the first time. Later changes should be made via 'solar.warn_active', 'solar.warn_temp' and 'solar.warn_speech' or your visualization.": "Questi valori di avviso vengono utilizzati come valori iniziali quando i datapoint vengono creati per la prima volta. Le modifiche successive dovranno essere apportate tramite 'solar.warn_active', 'solar.warn_temp' e 'solar.warn_speech' o tramite la visualizzazione.",
-  "This value is used as the initial season status when the datapoint is created for the first time. Later changes should be made via 'status.season_active' or your visualization.": "Questo valore viene utilizzato come stato stagionale iniziale quando il datapoint viene creato per la prima volta. Le modifiche successive dovrebbero essere apportate tramite \"status.season_active\" o la tua visualizzazione.",
-  "Threshold for PV surplus (W)": "Soglia per surplus FV (W)",
-  "Thursday": "Giovedì",
-  "Time Control": "Controllo del tempo",
-  "Time Window 2": "Finestra temporale 2",
-  "Time Window 3": "Finestra temporale 3",
-  "Time Windows": "Finestre temporali",
-  "Tuesday": "Martedì",
-  "Type of Heating Control": "Tipo di controllo del riscaldamento",
-  "Use Collector Sensor": "Utilizzare il sensore del collettore",
-  "Use Flow Sensor": "Utilizzare il sensore di flusso",
-  "Use Ground Sensor": "Usa il sensore di terra",
-  "Use Hysteresis Control": "Utilizzare il controllo dell'isteresi",
-  "Use Outside Temperature Sensor": "Utilizzare il sensore della temperatura esterna",
-  "Use Pressure Sensor": "Utilizzare il sensore di pressione",
-  "Use Return Sensor": "Utilizzare il sensore di ritorno",
-  "Use Surface Sensor": "Usa il sensore di superficie",
-  "Voice": "Voce",
-  "Volume (0–100)": "Volume (0–100)",
-  "Wednesday": "Mercoledì"
-}

package/admin/i18n/nl/translations.json

@@ -1,158 +0,0 @@
-{
-  "0.5x": "0,5x",
-  "1.0x": "1,0x",
-  "1.5x": "1,5x",
-  "2.0x": "2,0x",
-  "2.5x": "2,5x",
-  "3.0x": "3,0x",
-  "Additional Actuators": "Extra actuatoren",
-  "Additional actuators (valves, lighting & auxiliary pumps)": "Extra actuatoren (kleppen, verlichting en hulppompen)",
-  "Alexa device": "Alexa-apparaat",
-  "All text and speech outputs of the adapter – including AI forecasts, warnings, pump status, solar hints and diagnostic messages – are emitted via the central 'speech.queue' datapoint. This datapoint should be used for VIS displays, Alexa or Telegram outputs.": "Alle tekst- en spraakuitvoer van de adapter – inclusief AI-voorspellingen, waarschuwingen, pompstatus, zonne-energiehints en diagnostische berichten – worden verzonden via het centrale 'speech.queue'-datapunt. Dit datapunt moet worden gebruikt voor VIS-displays, Alexa- of Telegram-uitgangen.",
-  "Amazon Alexa": "Amazon Alexa",
-  "Announce / Notify on Warning": "Aankondigen / melden bij waarschuwing",
-  "Announce error messages": "Meld foutmeldingen",
-  "Auxiliary pump 1 active": "Hulppomp 1 actief",
-  "Auxiliary pump 2 active": "Hulppomp 2 actief",
-  "Auxiliary pump 3 active": "Hulppomp 3 actief",
-  "Auxiliary pumps & attractions": "Hulppompen en attracties",
-  "Central speech output (speech.queue)": "Centrale spraakuitvoer (speech.queue)",
-  "Collector Temperature Off Threshold (°C)": "Collectortemperatuur uitschakeldrempel (°C)",
-  "Collector Temperature On Threshold (°C)": "Collectortemperatuur op drempel (°C)",
-  "Collector Temperature Warning": "Waarschuwing collectortemperatuur",
-  "Collector Temperature Warning Threshold (°C)": "Waarschuwingsdrempel collectortemperatuur (°C)",
-  "Consumption and cost calculation": "Verbruik en kostenberekening",
-  "Datapoint containing current PV power (Watts)": "Datapunt met het huidige PV-vermogen (Watt)",
-  "Datapoint containing current house consumption (Watts)": "Datapunt met actueel woningverbruik (Watt)",
-  "Default (female)": "Standaard (vrouwelijk)",
-  "Difference between PV generation and house consumption that counts as surplus": "Verschil tussen PV-opwekking en woningverbruik dat als surplus geldt",
-  "Electricity price (€ / kWh)": "Elektriciteitsprijs (€ / kWh)",
-  "Email adapter instance": "E-mailadapterinstantie",
-  "Email subject": "E-mailonderwerp",
-  "Enable Alexa output": "Schakel Alexa-uitvoer in",
-  "Enable Collector Temperature Warning": "Schakel Collectortemperatuurwaarschuwing in",
-  "Enable Frost Protection": "Vorstbeveiliging inschakelen",
-  "Enable Heating Control": "Verwarmingsregeling inschakelen",
-  "Enable Solar Control": "Schakel zonneregeling in",
-  "Enable Telegram output": "Schakel Telegram-uitvoer in",
-  "Enable Time Window 1": "Tijdvenster 1 inschakelen",
-  "Enable Time Window 2": "Schakel Tijdvenster 2 in",
-  "Enable Time Window 3": "Tijdvenster inschakelen 3",
-  "Enable consumption and cost calculation": "Maak verbruiks- en kostenberekening mogelijk",
-  "Enable email output": "Schakel e-mailuitvoer in",
-  "Enable safety functions also in 'Manual' mode": "Schakel veiligheidsfuncties ook in 'Handmatige' modus in",
-  "Enable speech output": "Schakel spraakuitvoer in",
-  "End (HH:MM)": "Einde (UU:MM)",
-  "Example: Dirk,Dennis (empty = send to all users)": "Voorbeeld: Dirk,Dennis (leeg = verzenden naar alle gebruikers)",
-  "Friday": "Vrijdag",
-  "Frost Protection": "Vorstbescherming",
-  "Frost Protection Temperature (°C)": "Vorstbeschermingstemperatuur (°C)",
-  "General": "Algemeen",
-  "General Pool Settings": "Algemene zwembadinstellingen",
-  "General Settings": "Algemene instellingen",
-  "Heating / Heat Pump": "Verwarming / Warmtepomp",
-  "Help & Info": "Hulp & Info",
-  "Help and Information": "Hulp en informatie",
-  "Here you will find the complete documentation and information about all settings. Additional information about future versions will follow.": "Hier vindt u de volledige documentatie en informatie over alle instellingen. Aanvullende informatie over toekomstige versies volgt.",
-  "Hysteresis": "Hysterese",
-  "If enabled, safety functions such as frost protection and overheating protection (solar) remain active.": "Indien ingeschakeld blijven veiligheidsfuncties zoals vorstbeveiliging en oververhittingsbeveiliging (zonne-energie) actief.",
-  "Important information about the AI system": "Belangrijke informatie over het AI-systeem",
-  "Internet access & data protection": "Internettoegang en gegevensbescherming",
-  "Lighting": "Verlichting",
-  "Lighting 1 active": "Verlichting 1 actief",
-  "Lighting 2 active": "Verlichting 2 actief",
-  "Lighting 3 active": "Verlichting 3 actief",
-  "Logical Control State (true / false)": "Logische controlestatus (waar / onwaar)",
-  "Mail": "Mail",
-  "Male": "Mannelijk",
-  "Many automatic features (e.g. solar control, photovoltaic mode, AI weather logic and diagnostic functions) only operate when the pool season is active. The season status can be changed at any time via the 'status.season_active' datapoint or your visualization. The instance configuration only provides the initial value when the datapoint is created for the first time.": "Veel automatische functies (bijv. zonneregeling, fotovoltaïsche modus, AI-weerlogica en diagnosefuncties) werken alleen als het zwembadseizoen actief is. De seizoensstatus kan op elk moment worden gewijzigd via het datapunt 'status.season_active' of uw visualisatie. De instanceconfiguratie levert alleen de initiële waarde wanneer het datapunt voor de eerste keer wordt aangemaakt.",
-  "Max Power (Watt)": "Maximaal vermogen (Watt)",
-  "Maximum Pool Temperature (°C – Safety Cutoff)": "Maximale zwembadtemperatuur (°C – veiligheidsuitschakeling)",
-  "Minimum Circulation per Day": "Minimale oplage per dag",
-  "Monday": "Maandag",
-  "Name Auxiliary pump 1": "Naam Hulppomp 1",
-  "Name Auxiliary pump 2": "Naam Hulppomp 2",
-  "Name Auxiliary pump 3": "Naam Hulppomp 3",
-  "Name Lighting 1": "Naam Verlichting 1",
-  "Name Lighting 2": "Naam Verlichting 2",
-  "Name Lighting 3": "Naam Verlichting 3",
-  "Note about pool season": "Opmerking over het zwembadseizoen",
-  "Note: An external kWh meter is required for consumption calculation (e.g. smart plug).": "Let op: Voor de verbruiksberekening is een externe kWh-meter nodig (bijv. slimme stekker).",
-  "Note: Heating control is temperature-driven and only active during pool season. Depending on the selected control type, either a smart plug is switched or a logical control state (true/false) is set.": "Opmerking: de verwarmingsregeling is temperatuurgestuurd en alleen actief tijdens het zwembadseizoen. Afhankelijk van het geselecteerde besturingstype wordt er een slimme stekker geschakeld of wordt er een logische besturingsstatus (waar/onwaar) ingesteld.",
-  "Note: Supports external sensors as well as the PoolControl pressure box.": "Opmerking: Ondersteunt externe sensoren en de PoolControl-drukbox.",
-  "Note: The AI features are completely optional and can be disabled at any time via the 'ai.enabled' datapoint. Weather features (e.g. weather hints, pool tips, forecast for tomorrow) can also be individually enabled or disabled via 'ai.weather.switches.*'. The adapter uses the Open-Meteo service to generate weather data. For this, the geo-coordinates stored in ioBroker (latitude and longitude from system.config) are required.": "Let op: De AI-functies zijn volledig optioneel en kunnen op elk moment worden uitgeschakeld via het datapunt 'ai.enabled'. Weerfuncties (bijv. weertips, zwembadtips, voorspelling voor morgen) kunnen ook individueel worden in- of uitgeschakeld via 'ai.weather.switches.*'. De adapter maakt gebruik van de dienst Open-Meteo om weergegevens te genereren. Hiervoor zijn de in ioBroker opgeslagen geocoördinaten (breedtegraad en lengtegraad uit system.config) vereist.",
-  "Note: The warning resets automatically once the temperature drops 10% below the configured threshold.": "Opmerking: De waarschuwing wordt automatisch gereset zodra de temperatuur 10% onder de geconfigureerde drempel daalt.",
-  "Note: These settings are mainly used as initial values when PoolControl is set up for the first time. Later operation should be done via the PoolControl datapoints or your visualization. Existing runtime datapoints are not overwritten on adapter restart.": "Let op: Deze instellingen worden voornamelijk gebruikt als beginwaarden wanneer PoolControl voor de eerste keer wordt ingesteld. Een latere bediening moet via de PoolControl-datapunten of uw visualisatie plaatsvinden. Bestaande runtime-datapunten worden niet overschreven bij het opnieuw opstarten van de adapter.",
-  "Object ID Auxiliary pump 1": "Object-ID Hulppomp 1",
-  "Object ID Auxiliary pump 2": "Object-ID Hulppomp 2",
-  "Object ID Auxiliary pump 3": "Object-ID Hulppomp 3",
-  "Object ID Collector Sensor": "Object-ID-collectorsensor",
-  "Object ID Current Power (W)": "Object-ID Huidig ​​vermogen (W)",
-  "Object ID Flow Sensor": "Object-ID-stroomsensor",
-  "Object ID Ground Sensor": "Object-ID grondsensor",
-  "Object ID Heating / Heat Pump": "Object-ID Verwarming / Warmtepomp",
-  "Object ID Lighting 1": "Object-ID Verlichting 1",
-  "Object ID Lighting 2": "Object-ID Verlichting 2",
-  "Object ID Lighting 3": "Object-ID Verlichting 3",
-  "Object ID Outside Temperature Sensor": "Object-ID Buitentemperatuursensor",
-  "Object ID PV generation power (W)": "Object-ID PV-opwekkingsvermogen (W)",
-  "Object ID Pressure Sensor (bar)": "Object-ID Druksensor (bar)",
-  "Object ID Pump Switch Socket": "Object-ID Pompschakelaaraansluiting",
-  "Object ID Return Sensor": "Object-ID retoursensor",
-  "Object ID Surface Sensor": "Object-ID oppervlaktesensor",
-  "Object ID external kWh meter": "Object-ID externe kWh-meter",
-  "Object ID house consumption (W)": "Object ID huisverbruik (W)",
-  "Open documentation (English) on GitHub": "Open documentatie (Engels) op GitHub",
-  "Open documentation (German) on GitHub": "Open documentatie (Duits) op GitHub",
-  "Optional additional actuators can be configured here. Actuators are only created in the adapter if they are explicitly enabled.": "Optioneel kunnen hier extra actuatoren worden geconfigureerd. Actuatoren worden alleen in de adapter aangemaakt als ze expliciet zijn ingeschakeld.",
-  "PV, Consumption & Costs": "PV, verbruik en kosten",
-  "Photovoltaics (Surplus detection)": "Fotovoltaïsche zonne-energie (overschotdetectie)",
-  "Pool Name": "Naam zwembad",
-  "Pool Season Active": "Zwembadseizoen actief",
-  "Pool Size (Liters)": "Zwembadgrootte (liter)",
-  "Pressure Sensor (Filter Pressure)": "Druksensor (filterdruk)",
-  "Pump": "Pomp",
-  "Pump Data Points (Smart Socket & Current Power Consumption)": "Pompgegevenspunten (Smart Socket en huidig ​​stroomverbruik)",
-  "Pump Flow Rate (l/h)": "Pompdebiet (l/u)",
-  "Pump Settings (Rated Power)": "Pompinstellingen (nominaal vermogen)",
-  "Pump mode (Auto/Manual/Off/Timer) can be controlled via data point 'pump.mode'.": "Pompmodus (Auto/Handmatig/Uit/Timer) kan worden geregeld via datapunt 'pump.mode'.",
-  "Recipient address": "Adres van ontvanger",
-  "Safety Functions": "Veiligheidsfuncties",
-  "Saturday": "Zaterdag",
-  "Season Settings": "Seizoensinstellingen",
-  "Solar / Heating Control": "Zonne-/verwarmingsregeling",
-  "Speech Output": "Spraakuitvoer",
-  "Start (HH:MM)": "Begin (UU:MM)",
-  "Sunday": "Zondag",
-  "Switch Smart Plug (On / Off)": "Slimme stekker schakelen (aan / uit)",
-  "Target Pool Temperature (°C)": "Doelzwembadtemperatuur (°C)",
-  "Telegram": "Telegram",
-  "Telegram instance": "Telegram-instantie",
-  "Telegram recipients (usernames, comma separated / empty = send to all users)": "Telegramontvangers (gebruikersnamen, door komma's gescheiden / leeg = verzenden naar alle gebruikers)",
-  "Temperature Management": "Temperatuurbeheer",
-  "Temperature Sensors": "Temperatuursensoren",
-  "Temperature threshold for announcement (°C)": "Temperatuurdrempel voor aankondiging (°C)",
-  "The AI system (aiHelper & aiForecastHelper) retrieves weather data from Open-Meteo via HTTPS. It uses the geo-coordinates from the ioBroker system configuration (system.config › latitude/longitude). No data is stored or transmitted to third parties. Without valid geo-coordinates, the AI system cannot generate forecasts.": "Het AI-systeem (aiHelper & aiForecastHelper) haalt weergegevens op van Open-Meteo via HTTPS. Het gebruikt de geocoördinaten van de ioBroker-systeemconfiguratie (system.config ›breedtegraad/lengtegraad). Er worden geen gegevens opgeslagen of doorgegeven aan derden. Zonder geldige geocoördinaten kan het AI-systeem geen voorspellingen genereren.",
-  "The PoolControl adapter works completely locally by default. Currently, only the AI features access weather data from Open-Meteo via encrypted HTTPS. Only the geo-coordinates stored in ioBroker (latitude and longitude) are transmitted. No additional data is stored or sent to third parties. Future optional internet services may be added, but they will always be clearly marked.": "De PoolControl adapter werkt standaard volledig lokaal. Momenteel heeft alleen de AI-functie toegang tot weergegevens van Open-Meteo via gecodeerde HTTPS. Alleen de geocoördinaten die zijn opgeslagen in ioBroker (breedtegraad en lengtegraad) worden verzonden. Er worden geen aanvullende gegevens opgeslagen of verzonden naar derden. In de toekomst kunnen optionele internetdiensten worden toegevoegd, maar deze zullen altijd duidelijk worden gemarkeerd.",
-  "These warning values are used as initial values when the datapoints are created for the first time. Later changes should be made via 'solar.warn_active', 'solar.warn_temp' and 'solar.warn_speech' or your visualization.": "Deze waarschuwingswaarden worden gebruikt als initiële waarden wanneer de datapunten voor de eerste keer worden aangemaakt. Latere wijzigingen moeten worden aangebracht via 'solar.warn_active', 'solar.warn_temp' en 'solar.warn_speech' of uw visualisatie.",
-  "This value is used as the initial season status when the datapoint is created for the first time. Later changes should be made via 'status.season_active' or your visualization.": "Deze waarde wordt gebruikt als de initiële seizoenstatus wanneer het datapunt voor de eerste keer wordt aangemaakt. Latere wijzigingen dienen via 'status.season_active' of uw visualisatie te worden doorgevoerd.",
-  "Threshold for PV surplus (W)": "Drempel voor PV-overschot (W)",
-  "Thursday": "Donderdag",
-  "Time Control": "Tijdcontrole",
-  "Time Window 2": "Tijdvenster 2",
-  "Time Window 3": "Tijdvenster 3",
-  "Time Windows": "Tijdvensters",
-  "Tuesday": "Dinsdag",
-  "Type of Heating Control": "Type verwarmingsregeling",
-  "Use Collector Sensor": "Gebruik een collectorsensor",
-  "Use Flow Sensor": "Gebruik flowsensor",
-  "Use Ground Sensor": "Gebruik grondsensor",
-  "Use Hysteresis Control": "Gebruik hysteresiscontrole",
-  "Use Outside Temperature Sensor": "Gebruik buitentemperatuursensor",
-  "Use Pressure Sensor": "Gebruik druksensor",
-  "Use Return Sensor": "Gebruik retoursensor",
-  "Use Surface Sensor": "Gebruik oppervlaktesensor",
-  "Voice": "Stem",
-  "Volume (0–100)": "Volume (0–100)",
-  "Wednesday": "Woensdag"
-}

package/admin/i18n/pl/translations.json

@@ -1,158 +0,0 @@
-{
-  "0.5x": "0,5x",
-  "1.0x": "1,0x",
-  "1.5x": "1,5x",
-  "2.0x": "2,0x",
-  "2.5x": "2,5x",
-  "3.0x": "3,0x",
-  "Additional Actuators": "Dodatkowe siłowniki",
-  "Additional actuators (valves, lighting & auxiliary pumps)": "Dodatkowe siłowniki (zawory, oświetlenie i pompy pomocnicze)",
-  "Alexa device": "Urządzenie Alexa",
-  "All text and speech outputs of the adapter – including AI forecasts, warnings, pump status, solar hints and diagnostic messages – are emitted via the central 'speech.queue' datapoint. This datapoint should be used for VIS displays, Alexa or Telegram outputs.": "Wszystkie teksty i komunikaty głosowe adaptera – w tym prognozy AI, ostrzeżenia, stan pompy, wskazówki dotyczące energii słonecznej i komunikaty diagnostyczne – są emitowane za pośrednictwem centralnego punktu danych „kolejka mowy”. Ten punkt danych powinien być używany do wyświetlaczy VIS, wyjść Alexa lub Telegram.",
-  "Amazon Alexa": "Amazonka Alexa",
-  "Announce / Notify on Warning": "Ogłoś / Powiadom o ostrzeżeniu",
-  "Announce error messages": "Ogłaszaj komunikaty o błędach",
-  "Auxiliary pump 1 active": "Pompa pomocnicza 1 aktywna",
-  "Auxiliary pump 2 active": "Pompa pomocnicza 2 aktywna",
-  "Auxiliary pump 3 active": "Pompa pomocnicza 3 aktywna",
-  "Auxiliary pumps & attractions": "Pompy pomocnicze i atrakcje",
-  "Central speech output (speech.queue)": "Centralne wyjście mowy (kolejka mowy)",
-  "Collector Temperature Off Threshold (°C)": "Próg wyłączenia temperatury kolektora (°C)",
-  "Collector Temperature On Threshold (°C)": "Wartość progowa temperatury kolektora (°C)",
-  "Collector Temperature Warning": "Ostrzeżenie o temperaturze kolektora",
-  "Collector Temperature Warning Threshold (°C)": "Próg ostrzegawczy temperatury kolektora (°C)",
-  "Consumption and cost calculation": "Kalkulacja zużycia i kosztów",
-  "Datapoint containing current PV power (Watts)": "Punkt danych zawierający aktualną moc fotowoltaiczną (W)",
-  "Datapoint containing current house consumption (Watts)": "Punkt danych zawierający bieżące zużycie energii w domu (W)",
-  "Default (female)": "Domyślny (kobieta)",
-  "Difference between PV generation and house consumption that counts as surplus": "Różnica między wytwarzaniem energii fotowoltaicznej a zużyciem przez gospodarstwa domowe liczona jako nadwyżka",
-  "Electricity price (€ / kWh)": "Cena energii elektrycznej (€ / kWh)",
-  "Email adapter instance": "Instancja adaptera poczty e-mail",
-  "Email subject": "Temat wiadomości e-mail",
-  "Enable Alexa output": "Włącz wyjście Alexa",
-  "Enable Collector Temperature Warning": "Włącz ostrzeżenie o temperaturze kolektora",
-  "Enable Frost Protection": "Włącz ochronę przed zamarzaniem",
-  "Enable Heating Control": "Włącz sterowanie ogrzewaniem",
-  "Enable Solar Control": "Włącz kontrolę słoneczną",
-  "Enable Telegram output": "Włącz wyjście telegramu",
-  "Enable Time Window 1": "Włącz okno czasowe 1",
-  "Enable Time Window 2": "Włącz okno czasowe 2",
-  "Enable Time Window 3": "Włącz okno czasowe 3",
-  "Enable consumption and cost calculation": "Włącz obliczanie zużycia i kosztów",
-  "Enable email output": "Włącz wysyłanie wiadomości e-mail",
-  "Enable safety functions also in 'Manual' mode": "Włącz funkcje bezpieczeństwa także w trybie „Ręcznym”.",
-  "Enable speech output": "Włącz mowę",
-  "End (HH:MM)": "Koniec (GG:MM)",
-  "Example: Dirk,Dennis (empty = send to all users)": "Przykład: Dirk,Dennis (pusty = wyślij do wszystkich użytkowników)",
-  "Friday": "Piątek",
-  "Frost Protection": "Ochrona przed mrozem",
-  "Frost Protection Temperature (°C)": "Temperatura ochrony przed zamarzaniem (°C)",
-  "General": "Ogólny",
-  "General Pool Settings": "Ogólne ustawienia puli",
-  "General Settings": "Ustawienia ogólne",
-  "Heating / Heat Pump": "Ogrzewanie / Pompa ciepła",
-  "Help & Info": "Pomoc i informacje",
-  "Help and Information": "Pomoc i informacje",
-  "Here you will find the complete documentation and information about all settings. Additional information about future versions will follow.": "Tutaj znajdziesz pełną dokumentację i informacje o wszystkich ustawieniach. Dalsze informacje na temat przyszłych wersji zostaną podane poniżej.",
-  "Hysteresis": "Histereza",
-  "If enabled, safety functions such as frost protection and overheating protection (solar) remain active.": "Jeśli są włączone, funkcje bezpieczeństwa, takie jak ochrona przed zamarzaniem i ochrona przed przegrzaniem (solarna), pozostają aktywne.",
-  "Important information about the AI system": "Ważne informacje o systemie AI",
-  "Internet access & data protection": "Dostęp do Internetu i ochrona danych",
-  "Lighting": "Oświetlenie",
-  "Lighting 1 active": "Oświetlenie 1 aktywne",
-  "Lighting 2 active": "Oświetlenie 2 aktywne",
-  "Lighting 3 active": "Oświetlenie 3 aktywne",
-  "Logical Control State (true / false)": "Stan kontroli logicznej (prawda / fałsz)",
-  "Mail": "Poczta",
-  "Male": "Mężczyzna",
-  "Many automatic features (e.g. solar control, photovoltaic mode, AI weather logic and diagnostic functions) only operate when the pool season is active. The season status can be changed at any time via the 'status.season_active' datapoint or your visualization. The instance configuration only provides the initial value when the datapoint is created for the first time.": "Wiele funkcji automatycznych (np. sterowanie solarne, tryb fotowoltaiczny, logika pogodowa AI i funkcje diagnostyczne) działa tylko wtedy, gdy trwa sezon basenowy. Status sezonu można zmienić w dowolnym momencie za pomocą punktu danych „status.season_active” lub za pomocą wizualizacji. Konfiguracja instancji zapewnia wartość początkową tylko wtedy, gdy punkt danych jest tworzony po raz pierwszy.",
-  "Max Power (Watt)": "Maksymalna moc (W)",
-  "Maximum Pool Temperature (°C – Safety Cutoff)": "Maksymalna temperatura basenu (°C – wyłącznik bezpieczeństwa)",
-  "Minimum Circulation per Day": "Minimalny nakład dziennie",
-  "Monday": "Poniedziałek",
-  "Name Auxiliary pump 1": "Nazwa Pompa pomocnicza 1",
-  "Name Auxiliary pump 2": "Nazwa Pompa pomocnicza 2",
-  "Name Auxiliary pump 3": "Nazwa Pompa pomocnicza 3",
-  "Name Lighting 1": "Nazwa Oświetlenie 1",
-  "Name Lighting 2": "Nazwa Oświetlenie 2",
-  "Name Lighting 3": "Nazwa Oświetlenie 3",
-  "Note about pool season": "Uwaga dotycząca sezonu basenowego",
-  "Note: An external kWh meter is required for consumption calculation (e.g. smart plug).": "Uwaga: Do obliczenia zużycia wymagany jest zewnętrzny licznik kWh (np. inteligentna wtyczka).",
-  "Note: Heating control is temperature-driven and only active during pool season. Depending on the selected control type, either a smart plug is switched or a logical control state (true/false) is set.": "Uwaga: Sterowanie ogrzewaniem zależy od temperatury i jest aktywne tylko w sezonie basenowym. W zależności od wybranego typu sterowania następuje przełączenie inteligentnej wtyczki lub ustawienie logicznego stanu sterowania (prawda/fałsz).",
-  "Note: Supports external sensors as well as the PoolControl pressure box.": "Uwaga: obsługuje czujniki zewnętrzne oraz skrzynkę ciśnieniową PoolControl.",
-  "Note: The AI features are completely optional and can be disabled at any time via the 'ai.enabled' datapoint. Weather features (e.g. weather hints, pool tips, forecast for tomorrow) can also be individually enabled or disabled via 'ai.weather.switches.*'. The adapter uses the Open-Meteo service to generate weather data. For this, the geo-coordinates stored in ioBroker (latitude and longitude from system.config) are required.": "Uwaga: funkcje AI są całkowicie opcjonalne i można je wyłączyć w dowolnym momencie za pośrednictwem punktu danych „ai.enabled”. Funkcje pogodowe (np. wskazówki pogodowe, typy basenów, prognoza na jutro) można również indywidualnie włączać i wyłączać za pomocą „ai.weather.switches.*”. Adapter wykorzystuje usługę Open-Meteo do generowania danych pogodowych. W tym celu wymagane są współrzędne geograficzne zapisane w ioBroker (szerokość i długość geograficzna z system.config).",
-  "Note: The warning resets automatically once the temperature drops 10% below the configured threshold.": "Uwaga: ostrzeżenie resetuje się automatycznie, gdy temperatura spadnie o 10% poniżej skonfigurowanego progu.",
-  "Note: These settings are mainly used as initial values when PoolControl is set up for the first time. Later operation should be done via the PoolControl datapoints or your visualization. Existing runtime datapoints are not overwritten on adapter restart.": "Uwaga: Te ustawienia są używane głównie jako wartości początkowe podczas pierwszej konfiguracji PoolControl. Późniejszą operację należy wykonać za pomocą punktów danych PoolControl lub wizualizacji. Istniejące punkty danych środowiska wykonawczego nie są nadpisywane po ponownym uruchomieniu adaptera.",
-  "Object ID Auxiliary pump 1": "Identyfikator obiektu Pompa pomocnicza 1",
-  "Object ID Auxiliary pump 2": "Identyfikator obiektu Pompa pomocnicza 2",
-  "Object ID Auxiliary pump 3": "Identyfikator obiektu Pompa pomocnicza 3",
-  "Object ID Collector Sensor": "Czujnik zbierający identyfikator obiektu",
-  "Object ID Current Power (W)": "Identyfikator obiektu Aktualna moc (W)",
-  "Object ID Flow Sensor": "Czujnik przepływu z identyfikatorem obiektu",
-  "Object ID Ground Sensor": "Czujnik uziemienia obiektu ID",
-  "Object ID Heating / Heat Pump": "Identyfikator obiektu Ogrzewanie / Pompa ciepła",
-  "Object ID Lighting 1": "Oświetlenie identyfikacyjne obiektu 1",
-  "Object ID Lighting 2": "Oświetlenie identyfikacyjne obiektu 2",
-  "Object ID Lighting 3": "Oświetlenie identyfikacyjne obiektu 3",
-  "Object ID Outside Temperature Sensor": "Identyfikator obiektu Czujnik temperatury zewnętrznej",
-  "Object ID PV generation power (W)": "Identyfikator obiektu Moc generacji fotowoltaicznej (W)",
-  "Object ID Pressure Sensor (bar)": "Identyfikator obiektu Czujnik ciśnienia (bar)",
-  "Object ID Pump Switch Socket": "Gniazdo przełącznika pompy z identyfikatorem obiektu",
-  "Object ID Return Sensor": "Czujnik powrotu identyfikatora obiektu",
-  "Object ID Surface Sensor": "Czujnik powierzchniowy identyfikatora obiektu",
-  "Object ID external kWh meter": "Zewnętrzny licznik kWh ID obiektu",
-  "Object ID house consumption (W)": "Identyfikator obiektu Zużycie domu (W)",
-  "Open documentation (English) on GitHub": "Otwórz dokumentację (w języku angielskim) w serwisie GitHub",
-  "Open documentation (German) on GitHub": "Otwórz dokumentację (w języku niemieckim) w serwisie GitHub",
-  "Optional additional actuators can be configured here. Actuators are only created in the adapter if they are explicitly enabled.": "Tutaj można skonfigurować opcjonalne dodatkowe siłowniki. Siłowniki są tworzone w adapterze tylko wtedy, gdy są jawnie włączone.",
-  "PV, Consumption & Costs": "Fotowoltaika, zużycie i koszty",
-  "Photovoltaics (Surplus detection)": "Fotowoltaika (wykrywanie nadwyżek)",
-  "Pool Name": "Nazwa basenu",
-  "Pool Season Active": "Sezon basenowy aktywny",
-  "Pool Size (Liters)": "Rozmiar basenu (litry)",
-  "Pressure Sensor (Filter Pressure)": "Czujnik ciśnienia (ciśnienie filtra)",
-  "Pump": "Pompa",
-  "Pump Data Points (Smart Socket & Current Power Consumption)": "Punkty danych pompy (inteligentne gniazdo i bieżący pobór mocy)",
-  "Pump Flow Rate (l/h)": "Natężenie przepływu pompy (l/h)",
-  "Pump Settings (Rated Power)": "Ustawienia pompy (moc znamionowa)",
-  "Pump mode (Auto/Manual/Off/Timer) can be controlled via data point 'pump.mode'.": "Tryb pompy (automatyczny/ręczny/wyłączony/timer) można kontrolować za pomocą punktu danych „tryb pompy”.",
-  "Recipient address": "Adres odbiorcy",
-  "Safety Functions": "Funkcje bezpieczeństwa",
-  "Saturday": "Sobota",
-  "Season Settings": "Ustawienia sezonu",
-  "Solar / Heating Control": "Sterowanie energią słoneczną/ogrzewaniem",
-  "Speech Output": "Wyjście mowy",
-  "Start (HH:MM)": "Rozpocznij (GG:MM)",
-  "Sunday": "Niedziela",
-  "Switch Smart Plug (On / Off)": "Przełącznik inteligentnej wtyczki (wł./wył.)",
-  "Target Pool Temperature (°C)": "Docelowa temperatura basenu (°C)",
-  "Telegram": "Telegram",
-  "Telegram instance": "Instancja telegramu",
-  "Telegram recipients (usernames, comma separated / empty = send to all users)": "Odbiorcy telegramu (nazwy użytkowników, oddzielone przecinkami / puste = wyślij do wszystkich użytkowników)",
-  "Temperature Management": "Zarządzanie temperaturą",
-  "Temperature Sensors": "Czujniki temperatury",
-  "Temperature threshold for announcement (°C)": "Próg temperatury ogłaszania (°C)",
-  "The AI system (aiHelper & aiForecastHelper) retrieves weather data from Open-Meteo via HTTPS. It uses the geo-coordinates from the ioBroker system configuration (system.config › latitude/longitude). No data is stored or transmitted to third parties. Without valid geo-coordinates, the AI system cannot generate forecasts.": "System AI (aiHelper i aiForecastHelper) pobiera dane pogodowe z Open-Meteo za pośrednictwem protokołu HTTPS. Wykorzystuje współrzędne geograficzne z konfiguracji systemu ioBroker (system.config › latitude/longitude). Żadne dane nie są przechowywane ani przekazywane osobom trzecim. Bez prawidłowych współrzędnych geograficznych system AI nie może generować prognoz.",
-  "The PoolControl adapter works completely locally by default. Currently, only the AI features access weather data from Open-Meteo via encrypted HTTPS. Only the geo-coordinates stored in ioBroker (latitude and longitude) are transmitted. No additional data is stored or sent to third parties. Future optional internet services may be added, but they will always be clearly marked.": "Adapter PoolControl domyślnie działa całkowicie lokalnie. Obecnie tylko sztuczna inteligencja umożliwia dostęp do danych pogodowych z Open-Meteo za pośrednictwem szyfrowanego protokołu HTTPS. Przesyłane są tylko współrzędne geograficzne zapisane w ioBroker (szerokość i długość geograficzna). Żadne dodatkowe dane nie są przechowywane ani przesyłane osobom trzecim. W przyszłości mogą zostać dodane opcjonalne usługi internetowe, ale zawsze będą one wyraźnie oznaczone.",
-  "These warning values are used as initial values when the datapoints are created for the first time. Later changes should be made via 'solar.warn_active', 'solar.warn_temp' and 'solar.warn_speech' or your visualization.": "Te wartości ostrzegawcze są używane jako wartości początkowe podczas tworzenia punktów danych po raz pierwszy. Późniejszych zmian należy dokonać poprzez 'solar.warn_active', 'solar.warn_temp' i 'solar.warn_speech' lub poprzez swoją wizualizację.",
-  "This value is used as the initial season status when the datapoint is created for the first time. Later changes should be made via 'status.season_active' or your visualization.": "Ta wartość jest używana jako początkowy stan sezonu, gdy punkt danych jest tworzony po raz pierwszy. Późniejszych zmian należy dokonać poprzez 'status.season_active' lub swoją wizualizację.",
-  "Threshold for PV surplus (W)": "Próg nadwyżki PV (W)",
-  "Thursday": "Czwartek",
-  "Time Control": "Kontrola czasu",
-  "Time Window 2": "Okno czasowe 2",
-  "Time Window 3": "Okno czasowe 3",
-  "Time Windows": "Okna czasu",
-  "Tuesday": "Wtorek",
-  "Type of Heating Control": "Rodzaj sterowania ogrzewaniem",
-  "Use Collector Sensor": "Użyj czujnika kolektora",
-  "Use Flow Sensor": "Użyj czujnika przepływu",
-  "Use Ground Sensor": "Użyj czujnika uziemienia",
-  "Use Hysteresis Control": "Użyj kontroli histerezy",
-  "Use Outside Temperature Sensor": "Użyj czujnika temperatury zewnętrznej",
-  "Use Pressure Sensor": "Użyj czujnika ciśnienia",
-  "Use Return Sensor": "Użyj czujnika powrotu",
-  "Use Surface Sensor": "Użyj czujnika powierzchniowego",
-  "Voice": "Głos",
-  "Volume (0–100)": "Głośność (0–100)",
-  "Wednesday": "Środa"
-}