iobroker.poolcontrol 1.3.30 → 1.3.32

package/admin/i18n/zh-cn/translations.json

@@ -1,158 +0,0 @@
-{
-  "0.5x": "0.5倍",
-  "1.0x": "1.0倍",
-  "1.5x": "1.5倍",
-  "2.0x": "2.0倍",
-  "2.5x": "2.5倍",
-  "3.0x": "3.0倍",
-  "Additional Actuators": "附加执行器",
-  "Additional actuators (valves, lighting & auxiliary pumps)": "附加执行器（阀门、照明和辅助泵）",
-  "Alexa device": "Alexa 设备",
-  "All text and speech outputs of the adapter – including AI forecasts, warnings, pump status, solar hints and diagnostic messages – are emitted via the central 'speech.queue' datapoint. This datapoint should be used for VIS displays, Alexa or Telegram outputs.": "适配器的所有文本和语音输出（包括人工智能预测、警告、泵状态、太阳能提示和诊断消息）均通过中央“speech.queue”数据点发出。该数据点应用于 VIS 显示、Alexa 或 Telegram 输出。",
-  "Amazon Alexa": "亚马逊 Alexa",
-  "Announce / Notify on Warning": "公布/通知警告",
-  "Announce error messages": "公布错误信息",
-  "Auxiliary pump 1 active": "辅助泵 1 启用",
-  "Auxiliary pump 2 active": "辅助泵 2 激活",
-  "Auxiliary pump 3 active": "辅助泵 3 激活",
-  "Auxiliary pumps & attractions": "辅助泵和景点",
-  "Central speech output (speech.queue)": "中央语音输出（speech.queue）",
-  "Collector Temperature Off Threshold (°C)": "集电极温度关闭阈值 (°C)",
-  "Collector Temperature On Threshold (°C)": "集电极温度阈值 (°C)",
-  "Collector Temperature Warning": "集热器温度警告",
-  "Collector Temperature Warning Threshold (°C)": "集电极温度警告阈值 (°C)",
-  "Consumption and cost calculation": "消耗及成本计算",
-  "Datapoint containing current PV power (Watts)": "包含当前光伏功率（瓦）的数据点",
-  "Datapoint containing current house consumption (Watts)": "包含当前房屋消耗（瓦）的数据点",
-  "Default (female)": "默认（女）",
-  "Difference between PV generation and house consumption that counts as surplus": "光伏发电与家庭消费之间的差额算作盈余",
-  "Electricity price (€ / kWh)": "电价（欧元/千瓦时）",
-  "Email adapter instance": "电子邮件适配器实例",
-  "Email subject": "电子邮件主题",
-  "Enable Alexa output": "启用 Alexa 输出",
-  "Enable Collector Temperature Warning": "启用收集器温度警告",
-  "Enable Frost Protection": "启用防霜冻保护",
-  "Enable Heating Control": "启用加热控制",
-  "Enable Solar Control": "启用太阳能控制",
-  "Enable Telegram output": "启用电报输出",
-  "Enable Time Window 1": "启用时间窗口 1",
-  "Enable Time Window 2": "启用时间窗口 2",
-  "Enable Time Window 3": "启用时间窗口 3",
-  "Enable consumption and cost calculation": "启用消耗和成本计算",
-  "Enable email output": "启用电子邮件输出",
-  "Enable safety functions also in 'Manual' mode": "在“手动”模式下也启用安全功能",
-  "Enable speech output": "启用语音输出",
-  "End (HH:MM)": "结束（时:分）",
-  "Example: Dirk,Dennis (empty = send to all users)": "示例：Dirk,Dennis（空 = 发送给所有用户）",
-  "Friday": "星期五",
-  "Frost Protection": "防冻保护",
-  "Frost Protection Temperature (°C)": "防冻温度 (°C)",
-  "General": "一般的",
-  "General Pool Settings": "常规池设置",
-  "General Settings": "常规设置",
-  "Heating / Heat Pump": "供暖/热泵",
-  "Help & Info": "帮助和信息",
-  "Help and Information": "帮助和信息",
-  "Here you will find the complete documentation and information about all settings. Additional information about future versions will follow.": "在这里您可以找到有关所有设置的完整文档和信息。有关未来版本的更多信息将随之而来。",
-  "Hysteresis": "迟滞",
-  "If enabled, safety functions such as frost protection and overheating protection (solar) remain active.": "如果启用，防冻保护和过热保护（太阳能）等安全功能将保持激活状态。",
-  "Important information about the AI system": "有关人工智能系统的重要信息",
-  "Internet access & data protection": "互联网访问和数据保护",
-  "Lighting": "灯光",
-  "Lighting 1 active": "照明 1 激活",
-  "Lighting 2 active": "照明 2 激活",
-  "Lighting 3 active": "照明 3 激活",
-  "Logical Control State (true / false)": "逻辑控制状态（真/假）",
-  "Mail": "邮件",
-  "Male": "男性",
-  "Many automatic features (e.g. solar control, photovoltaic mode, AI weather logic and diagnostic functions) only operate when the pool season is active. The season status can be changed at any time via the 'status.season_active' datapoint or your visualization. The instance configuration only provides the initial value when the datapoint is created for the first time.": "许多自动功能（例如太阳能控制、光伏模式、人工智能天气逻辑和诊断功能）仅在泳池季节活跃时运行。季节状态可以随时通过“status.season_active”数据点或可视化更改。实例配置仅在第一次创建数据点时提供初始值。",
-  "Max Power (Watt)": "最大功率（瓦）",
-  "Maximum Pool Temperature (°C – Safety Cutoff)": "最高水池温度（°C – 安全截止值）",
-  "Minimum Circulation per Day": "每日最低流通量",
-  "Monday": "周一",
-  "Name Auxiliary pump 1": "名称 辅助泵1",
-  "Name Auxiliary pump 2": "名称 辅助泵2",
-  "Name Auxiliary pump 3": "名称 辅助泵3",
-  "Name Lighting 1": "名称 灯光 1",
-  "Name Lighting 2": "名称 灯光 2",
-  "Name Lighting 3": "名称 灯光 3",
-  "Note about pool season": "关于泳池季节的注意事项",
-  "Note: An external kWh meter is required for consumption calculation (e.g. smart plug).": "注意：消耗量计算需要外部千瓦时表（例如智能插头）。",
-  "Note: Heating control is temperature-driven and only active during pool season. Depending on the selected control type, either a smart plug is switched or a logical control state (true/false) is set.": "注意：加热控制由温度驱动，仅在泳池季节有效。根据所选的控制类型，切换智能插头或设置逻辑控制状态（真/假）。",
-  "Note: Supports external sensors as well as the PoolControl pressure box.": "注意：支持外部传感器以及 PoolControl 压力盒。",
-  "Note: The AI features are completely optional and can be disabled at any time via the 'ai.enabled' datapoint. Weather features (e.g. weather hints, pool tips, forecast for tomorrow) can also be individually enabled or disabled via 'ai.weather.switches.*'. The adapter uses the Open-Meteo service to generate weather data. For this, the geo-coordinates stored in ioBroker (latitude and longitude from system.config) are required.": "注意：AI 功能完全是可选的，可以随时通过“ai.enabled”数据点禁用。天气功能（例如天气提示、泳池提示、明天天气预报）也可以通过“ai.weather.switches.*”单独启用或禁用。该适配器使用 Open-Meteo 服务生成天气数据。为此，需要存储在 ioBroker 中的地理坐标（来自 system.config 的纬度和经度）。",
-  "Note: The warning resets automatically once the temperature drops 10% below the configured threshold.": "注意：一旦温度下降到配置阈值以下 10%，警告就会自动重置。",
-  "Note: These settings are mainly used as initial values when PoolControl is set up for the first time. Later operation should be done via the PoolControl datapoints or your visualization. Existing runtime datapoints are not overwritten on adapter restart.": "注意：这些设置主要用作第一次设置 PoolControl 时的初始值。稍后的操作应通过 PoolControl 数据点或可视化来完成。适配器重新启动时不会覆盖现有运行时数据点。",
-  "Object ID Auxiliary pump 1": "对象 ID 辅助泵 1",
-  "Object ID Auxiliary pump 2": "对象 ID 辅助泵 2",
-  "Object ID Auxiliary pump 3": "对象 ID 辅助泵 3",
-  "Object ID Collector Sensor": "物体 ID 收集器传感器",
-  "Object ID Current Power (W)": "对象 ID 当前功率（W）",
-  "Object ID Flow Sensor": "物体 ID 流量传感器",
-  "Object ID Ground Sensor": "物体 ID 地面传感器",
-  "Object ID Heating / Heat Pump": "对象 ID 加热/热泵",
-  "Object ID Lighting 1": "对象 ID 照明 1",
-  "Object ID Lighting 2": "对象 ID 照明 2",
-  "Object ID Lighting 3": "对象 ID 照明 3",
-  "Object ID Outside Temperature Sensor": "物体 ID 外部温度传感器",
-  "Object ID PV generation power (W)": "对象ID 光伏发电功率（W）",
-  "Object ID Pressure Sensor (bar)": "对象 ID 压力传感器 (bar)",
-  "Object ID Pump Switch Socket": "对象 ID 泵开关插座",
-  "Object ID Return Sensor": "物体 ID 返回传感器",
-  "Object ID Surface Sensor": "物体 ID 表面传感器",
-  "Object ID external kWh meter": "对象 ID 外部电能表",
-  "Object ID house consumption (W)": "对象ID房屋消耗（W）",
-  "Open documentation (English) on GitHub": "GitHub 上的开放文档（英文）",
-  "Open documentation (German) on GitHub": "GitHub 上的开放文档（德语）",
-  "Optional additional actuators can be configured here. Actuators are only created in the adapter if they are explicitly enabled.": "可以在此处配置可选的附加执行器。仅当明确启用执行器时，才会在适配器中创建执行器。",
-  "PV, Consumption & Costs": "光伏、消耗和成本",
-  "Photovoltaics (Surplus detection)": "光伏（剩余检测）",
-  "Pool Name": "矿池名称",
-  "Pool Season Active": "泳池季节活跃",
-  "Pool Size (Liters)": "泳池尺寸（升）",
-  "Pressure Sensor (Filter Pressure)": "压力传感器（过滤器压力）",
-  "Pump": "泵",
-  "Pump Data Points (Smart Socket & Current Power Consumption)": "泵数据点（智能插座和当前功耗）",
-  "Pump Flow Rate (l/h)": "泵流量（升/小时）",
-  "Pump Settings (Rated Power)": "泵设置（额定功率）",
-  "Pump mode (Auto/Manual/Off/Timer) can be controlled via data point 'pump.mode'.": "泵模式（自动/手动/关闭/定时器）可以通过数据点“pump.mode”进行控制。",
-  "Recipient address": "收件人地址",
-  "Safety Functions": "安全功能",
-  "Saturday": "周六",
-  "Season Settings": "季节设置",
-  "Solar / Heating Control": "太阳能/加热控制",
-  "Speech Output": "语音输出",
-  "Start (HH:MM)": "开始（小时：分钟）",
-  "Sunday": "星期日",
-  "Switch Smart Plug (On / Off)": "开关智能插头（开/关）",
-  "Target Pool Temperature (°C)": "目标水池温度 (°C)",
-  "Telegram": "电报",
-  "Telegram instance": "电报实例",
-  "Telegram recipients (usernames, comma separated / empty = send to all users)": "电报收件人（用户名，逗号分隔/空=发送给所有用户）",
-  "Temperature Management": "温度管理",
-  "Temperature Sensors": "温度传感器",
-  "Temperature threshold for announcement (°C)": "公告温度阈值（℃）",
-  "The AI system (aiHelper & aiForecastHelper) retrieves weather data from Open-Meteo via HTTPS. It uses the geo-coordinates from the ioBroker system configuration (system.config › latitude/longitude). No data is stored or transmitted to third parties. Without valid geo-coordinates, the AI system cannot generate forecasts.": "AI 系统（aiHelper 和 aiForecastHelper）通过 HTTPS 从 Open-Meteo 检索天气数据。它使用 ioBroker 系统配置（system.config › 纬度/经度）中的地理坐标。不会存储任何数据或将其传输给第三方。如果没有有效的地理坐标，人工智能系统就无法生成预测。",
-  "The PoolControl adapter works completely locally by default. Currently, only the AI features access weather data from Open-Meteo via encrypted HTTPS. Only the geo-coordinates stored in ioBroker (latitude and longitude) are transmitted. No additional data is stored or sent to third parties. Future optional internet services may be added, but they will always be clearly marked.": "默认情况下，PoolControl 适配器完全在本地工作。目前，只有 AI 功能可以通过加密的 HTTPS 访问 Open-Meteo 的天气数据。仅传输存储在 ioBroker 中的地理坐标（纬度和经度）。不会存储任何额外数据或将其发送给第三方。未来可能会添加可选的互联网服务，但它们将始终被明确标记。",
-  "These warning values are used as initial values when the datapoints are created for the first time. Later changes should be made via 'solar.warn_active', 'solar.warn_temp' and 'solar.warn_speech' or your visualization.": "首次创建数据点时，这些警告值将用作初始值。稍后的更改应通过“solar.warn_active”、“solar.warn_temp”和“solar.warn_speech”或您的可视化进行。",
-  "This value is used as the initial season status when the datapoint is created for the first time. Later changes should be made via 'status.season_active' or your visualization.": "当第一次创建数据点时，该值用作初始季节状态。稍后的更改应通过“status.season_active”或您的可视化进行。",
-  "Threshold for PV surplus (W)": "光伏剩余阈值（W）",
-  "Thursday": "周四",
-  "Time Control": "时间控制",
-  "Time Window 2": "时间窗口2",
-  "Time Window 3": "时间窗口3",
-  "Time Windows": "时间窗口",
-  "Tuesday": "周二",
-  "Type of Heating Control": "加热控制类型",
-  "Use Collector Sensor": "使用收集器传感器",
-  "Use Flow Sensor": "使用流量传感器",
-  "Use Ground Sensor": "使用地面传感器",
-  "Use Hysteresis Control": "使用迟滞控制",
-  "Use Outside Temperature Sensor": "使用室外温度传感器",
-  "Use Pressure Sensor": "使用压力传感器",
-  "Use Return Sensor": "使用返回传感器",
-  "Use Surface Sensor": "使用表面传感器",
-  "Voice": "嗓音",
-  "Volume (0–100)": "音量 (0–100)",
-  "Wednesday": "周三"
-}