highcharts 13.0.0 → 13.0.2

package/options/scatter.src.d.ts

@@ -54,59 +54,688 @@ declare module "../highcharts.src" {
         fontWeight?: string;
     }
     /**
-     * (Highcharts) Options for the connector in the _Series on point_ feature.
-     *
-     * In styled mode, the connector can be styled with the
-     * `.highcharts-connector-seriesonpoint` class name.
+     * (Highcharts) Animation when hovering over the marker.
+     */
+    interface PlotScatter3dMarkerStatesSelectAnimationOptions {
+        duration?: number;
+    }
+    /**
+     * (Highcharts) Options for the _Series on point_ feature. Only `pie` and
+     * `sunburst` series are supported at this moment.
      */
-    interface PlotScatter3dOnPointConnectorOptions {
+    interface PlotScatter3dOnPointOptions {
         /**
-         * (Highcharts) A name for the dash style to use for the connector.
+         * (Highcharts) Options for the connector in the _Series on point_
+         * feature.
+         *
+         * In styled mode, the connector can be styled with the
+         * `.highcharts-connector-seriesonpoint` class name.
          */
-        dashstyle?: string;
+        connectorOptions?: (Highcharts.PlotScatter3dOnPointConnectorOptions|Highcharts.SVGAttributes);
         /**
-         * (Highcharts) Color of the connector line. By default it's the series'
-         * color.
+         * (Highcharts) The `id` of the point that we connect the series to.
+         * Only points with a given `plotX` and `plotY` values and map points
+         * are valid.
          */
-        stroke?: string;
+        id?: string;
         /**
-         * (Highcharts) Pixel width of the connector line.
+         * (Highcharts) Options allowing to set a position and an offset of the
+         * series in the _Series on point_ feature.
          */
-        width?: number;
+        position?: (object|Highcharts.PlotScatter3dOnPointPositionOptions);
     }
     /**
-     * (Highcharts) Options allowing to set a position and an offset of the
-     * series in the _Series on point_ feature.
+     * (Highcharts) A 3D scatter plot uses x, y and z coordinates to display
+     * values for three variables for a set of data.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `scatter3d` series are defined in
+     * plotOptions.scatter3d.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - type option should always be set, otherwise a broad set of unsupported
+     * options is allowed.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
      */
-    interface PlotScatter3dOnPointPositionOptions {
+    interface PlotScatter3dOptions {
         /**
-         * (Highcharts) Series center offset from the original x position. If
-         * defined, the connector line is drawn connecting original position
-         * with new position.
+         * (Highcharts) Accessibility options for a series.
          */
-        offsetX?: number;
+        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
+        /**
+         * (Highcharts) Allow this series' points to be selected by clicking on
+         * the graphic (columns, point markers, pie slices, map areas etc).
+         *
+         * The selected points can be handled by point select and unselect
+         * events, or collectively by the getSelectedPoints function.
+         *
+         * And alternative way of selecting points is through dragging.
+         */
+        allowPointSelect?: boolean;
+        /**
+         * (Highcharts) Enable or disable the initial animation when a series is
+         * displayed. The animation can also be set as a configuration object.
+         * Please note that this option only applies to the initial animation of
+         * the series itself. For other animations, see chart.animation and the
+         * animation parameter under the API methods. The following properties
+         * are supported:
+         *
+         * - `defer`: The animation delay time in milliseconds.
+         *
+         * - `duration`: The duration of the animation in milliseconds.
+         * (Defaults to `1000`)
+         *
+         * - `easing`: Can be a string reference to an easing function set on
+         * the `Math` object or a function. See the _Custom easing function_
+         * demo below. (Defaults to `easeInOutSine`)
+         *
+         * Due to poor performance, animation is disabled in old IE browsers for
+         * several chart types.
+         */
+        animation?: (boolean|Highcharts.AnimationOptionsObject);
         /**
-         * (Highcharts) Series center offset from the original y position. If
-         * defined, the connector line is drawn from original position to a new
+         * (Highcharts) For some series, there is a limit that shuts down
+         * animation by default when the total number of points in the chart is
+         * too high. For example, for a column chart and its derivatives,
+         * animation does not run if there is more than 250 points totally. To
+         * disable this cap, set `animationLimit` to `Infinity`. This option
+         * works if animation is fired on individual points, not on a group of
+         * points like e.g. during the initial animation.
+         */
+        animationLimit?: number;
+        /**
+         * (Highcharts) An additional class name to apply to the series'
+         * graphical elements. This option does not replace default class names
+         * of the graphical element. Changes to the series' color will also be
+         * reflected in a chart's legend and tooltip.
+         */
+        className?: string;
+        /**
+         * (Highcharts) Disable this option to allow series rendering in the
+         * whole plotting area.
+         *
+         * **Note:** Clipping should be always enabled when chart.zoomType is
+         * set
+         */
+        clip?: boolean;
+        /**
+         * (Highcharts) The main color of the series. In line type series it
+         * applies to the line and the point markers unless otherwise specified.
+         * In bar type series it applies to the bars unless a color is specified
+         * per point. The default value is pulled from the `options.colors`
+         * array.
+         *
+         * In styled mode, the color can be defined by the colorIndex option.
+         * Also, the series color can be set with the `.highcharts-series`,
+         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
+         * `.highcharts-series-{n}` class, or individual classes given by the
+         * `className` option.
+         */
+        color?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps) When using dual or multiple color
+         * axes, this number defines which colorAxis the particular series is
+         * connected to. It refers to either the axis id or the index of the
+         * axis in the colorAxis array, with 0 being the first. Set this option
+         * to false to prevent a series from connecting to the default color
+         * axis.
+         *
+         * Since v7.2.0 the option can also be an axis id or an axis index
+         * instead of a boolean flag.
+         */
+        colorAxis?: (boolean|number|string);
+        /**
+         * (Highcharts) Styled mode only. A specific color index to use for the
+         * series, so its graphic representations are given the class name
+         * `highcharts-color-{n}`.
+         *
+         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
+         * changing the color scheme very convenient.
+         */
+        colorIndex?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps) Determines what data value should
+         * be used to calculate point color if `colorAxis` is used. Requires to
+         * set `min` and `max` if some custom point property is used or if
+         * approximation for data grouping is set to `'sum'`.
+         */
+        colorKey?: string;
+        /**
+         * (Highcharts) Polar charts only. Whether to connect the ends of a line
+         * series plot across the extremes.
+         */
+        connectEnds?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to connect a graph line across null
+         * points, or render a gap between the two points on either side of the
+         * null.
+         *
+         * In stacked area chart, if `connectNulls` is set to true, null points
+         * are interpreted as 0.
+         */
+        connectNulls?: boolean;
+        /**
+         * (Highcharts, Highstock, Gantt) When true, each point or column edge
+         * is rounded to its nearest pixel in order to render sharp on screen.
+         * In some cases, when there are a lot of densely packed columns, this
+         * leads to visible difference in column widths or distance between
+         * columns. In these cases, setting `crisp` to `false` may look better,
+         * even though each column is rendered blurry.
+         */
+        crisp?: boolean;
+        /**
+         * (Highcharts) You can set the cursor to "pointer" if you have click
+         * events attached to the series, to signal to the user that the points
+         * and lines can be clicked.
+         *
+         * In styled mode, the series cursor can be set with the same classes as
+         * listed under series.color.
+         */
+        cursor?: (string|Highcharts.CursorValue);
+        /**
+         * (Highcharts) A reserved subspace to store options and values for
+         * customized functionality. Here you can add additional data for your
+         * own event callbacks and formatter callbacks.
+         */
+        custom?: Highcharts.Dictionary<any>;
+        /**
+         * (Highcharts) Name of the dash style to use for the graph, or for some
+         * series types the outline of each shape.
+         *
+         * In styled mode, the stroke dash-array can be set with the same
+         * classes as listed under series.color.
+         */
+        dashStyle?: Highcharts.DashStyleValue;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+         * labels, appearing next to each data point.
+         *
+         * Since v6.2.0, multiple data labels can be applied to each single
+         * point by defining them as an array of configs.
+         *
+         * In styled mode, the data labels can be styled with the
+         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+         * (see example).
+         */
+        dataLabels?: (Highcharts.PlotScatter3dDataLabelsOptions|Array<Highcharts.PlotScatter3dDataLabelsOptions>);
+        /**
+         * (Highcharts) The mapping between the data table and the series data
+         * points. This is used in conjunction with the `dataTable` option (on
+         * chart or series level) to map columns from the data table to the
+         * properties of the data points. The keys of the `dataMapping` object
+         * correspond to the properties of the data points (e.g. `x`, `y`,
+         * `name`), and the values are objects that specify which column from
+         * which data table to use for that property.
+         *
+         * The keys can also be nested paths, for example `dataLabel.format`, to
+         * map to nested properties of the data points.
+         *
+         * The values can also be strings, in which case they are interpreted as
+         * column id's from the first data table.
+         *
+         * A typical use case is that multiple series share a common column,
+         * like `name` or `x`. In this case, to avoid repetition, the common
+         * column can be applied in `plotOptions.series.dataMapping` and the
+         * individual series can specify only the columns that are unique to
+         * them.
+         *
+         * The series name defaults to the column ID of the main data column in
+         * the mapping. The main data column is typically the `y` data for
+         * cartesian series, or `value` for map series. For example, if the
+         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
+         * online documentation for example)
+         *
+         * If the columns of the DataTable have keys matching the series keys,
+         * the data mapping is not necessary. For example, this DataTable will
+         * connect directly to the series' `x` and `y` keys: (see online
+         * documentation for example)
+         */
+        dataMapping?: Highcharts.DataMappingOptionsObject;
+        /**
+         * (Highcharts, Highstock) Options for series data sorting.
+         */
+        dataSorting?: Highcharts.PlotScatter3dDataSortingOptions;
+        /**
+         * (Highcharts) Options for a specific series-level data table or an
+         * array of data tables. The `dataTable` option can be either a
+         * configuration object or an instance of the `DataTable` class. If a
+         * `DataTable` instance is passed, it will be used directly. If a
+         * configuration object or an array is passed, a new `DataTable`
+         * instance will be created based on the provided configuration.
+         */
+        dataTable?: (Highcharts.DataTable|Highcharts.DataTableOptionsObject|Array<(Highcharts.DataTable|Highcharts.DataTableOptionsObject)>);
+        /**
+         * (Highcharts) Deprecated. Use
+         * plotOptions.series.accessibility.description instead.
+         *
+         * A description of the series to add to the screen reader information
+         * about the series.
+         *
+         * @deprecated 8.0.0
+         */
+        description?: string;
+        /**
+         * (Highcharts) Enable or disable the mouse tracking for a specific
+         * series. This includes point tooltips and click events on graphs and
+         * points. For large datasets it improves performance.
+         */
+        enableMouseTracking?: boolean;
+        /**
+         * (Highcharts) General event handlers for the series items. These event
+         * hooks can also be attached to the series at run time using the
+         * `Highcharts.addEvent` function.
+         */
+        events?: Highcharts.SeriesEventsOptionsObject;
+        /**
+         * (Highcharts) Determines whether the series should look for the
+         * nearest point in both dimensions or just the x-dimension when
+         * hovering the series. Defaults to `'xy'` for scatter series and `'x'`
+         * for most other series. If the data has duplicate x-values, it is
+         * recommended to set this to `'xy'` to allow hovering over all points.
+         *
+         * Applies only to series types using nearest neighbor search (not
+         * direct hover) for tooltip.
+         */
+        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
+        /**
+         * (Highcharts, Highstock) Defines when to display a gap in the graph,
+         * together with the gapUnit option.
+         *
+         * In case when `dataGrouping` is enabled, points can be grouped into a
+         * larger time span. This can make the grouped points to have a greater
+         * distance than the absolute value of `gapSize` property, which will
+         * result in disappearing graph completely. To prevent this situation
+         * the mentioned distance between grouped points is used instead of
+         * previously defined `gapSize`.
+         *
+         * In practice, this option is most often used to visualize gaps in time
+         * series. In a stock chart, intraday data is available for daytime
+         * hours, while gaps will appear in nights and weekends.
+         */
+        gapSize?: number;
+        /**
+         * (Highcharts, Highstock) Together with gapSize, this option defines
+         * where to draw gaps in the graph.
+         *
+         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
+         * that if the distance between two points is greater than 5 times that
+         * of the two closest points, the graph will be broken.
+         *
+         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
+         * values, which on a datetime axis is milliseconds. This also applies
+         * to the navigator series that inherits gap options from the base
+         * series.
+         */
+        gapUnit?: Highcharts.OptionsGapUnitValue;
+        /**
+         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
+         * total chart width or only the zoomed area when zooming in on parts of
+         * the X axis. By default, the Y axis adjusts to the min and max of the
+         * visible data. Cartesian series only.
+         */
+        getExtremesFromAll?: boolean;
+        /**
+         * (Highcharts) Highlight only the hovered point and fade the remaining
+         * points.
+         *
+         * Scatter-type series require enabling the 'inactive' marker state and
+         * adjusting opacity. Note that this approach could affect performance
+         * with large datasets.
+         */
+        inactiveOtherPoints?: boolean;
+        /**
+         * (Highcharts) When set to `false` will prevent the series data from
+         * being included in any form of data export.
+         *
+         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
+         * as `includeInCSVExport`.
+         */
+        includeInDataExport?: boolean;
+        /**
+         * (Highcharts, Highstock) Apply a jitter effect for the rendered
+         * markers. When plotting discrete values, a little random noise may
+         * help telling the points apart. The jitter setting applies a random
+         * displacement of up to `n` axis units in either direction. So for
+         * example on a horizontal X axis, setting the `jitter.x` to 0.24 will
+         * render the point in a random position between 0.24 units to the left
+         * and 0.24 units to the right of the true axis position. On a category
+         * axis, setting it to 0.5 will fill up the bin and make the data appear
+         * continuous.
+         *
+         * When rendered on top of a box plot or a column series, a jitter value
+         * of 0.24 will correspond to the underlying series' default
+         * groupPadding and pointPadding settings.
+         *
+         * **Note:** With boost mode enabled, the jitter effect is not
+         * supported.
+         */
+        jitter?: Highcharts.PlotScatter3dJitterOptions;
+        /**
+         * (Highcharts) An array specifying which option maps to which key in
+         * the data point array. This makes it convenient to work with
+         * unstructured data arrays from different sources.
+         */
+        keys?: Array<string>;
+        /**
+         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
+         * the series as possible in a natural way, seeking to avoid other
+         * series. The goal of this feature is to make the chart more easily
+         * readable, like if a human designer placed the labels in the optimal
          * position.
+         *
+         * The series labels currently work with series types having a `graph`
+         * or an `area`.
          */
-        offsetY?: number;
+        label?: Highcharts.SeriesLabelOptionsObject;
         /**
-         * (Highcharts) X position of the series center. By default, the series
-         * is displayed on the point that it is connected to.
+         * (Highcharts) What type of legend symbol to render for this series.
+         * Can be one of `areaMarker`, `lineMarker` or `rectangle`.
          */
-        x?: number;
+        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
         /**
-         * (Highcharts) Y position of the series center. By default, the series
-         * is displayed on the point that it is connected to.
+         * (Highcharts) The line cap used for line ends and line joins on the
+         * graph.
          */
-        y?: number;
+        linecap?: Highcharts.SeriesLinecapValue;
+        /**
+         * (Highcharts, Highstock) The width of the line connecting the data
+         * points.
+         */
+        lineWidth?: number;
+        /**
+         * (Highcharts, Highstock, Gantt) The id of another series to link to.
+         * Additionally, the value can be ":previous" to link to the previous
+         * series. When two series are linked, only the first one appears in the
+         * legend. Toggling the visibility of this also toggles the linked
+         * series.
+         *
+         * If master series uses data sorting and linked series does not have
+         * its own sorting definition, the linked series will be sorted in the
+         * same order as the master one.
+         *
+         * If a `compare` value is not set on a linked series, it will be
+         * inherited from the parent series.
+         */
+        linkedTo?: string;
+        /**
+         * (Highcharts) Options for the point markers of line and scatter-like
+         * series. Properties like `fillColor`, `lineColor` and `lineWidth`
+         * define the visual appearance of the markers. The `symbol` option
+         * defines the shape. Other series types, like column series, don't have
+         * markers, but have visual options on the series level instead.
+         *
+         * In styled mode, the markers can be styled with the
+         * `.highcharts-point`, `.highcharts-point-hover` and
+         * `.highcharts-point-select` class names.
+         */
+        marker?: Highcharts.PointMarkerOptionsObject;
+        /**
+         * (Highcharts) The color for the parts of the graph or points that are
+         * below the threshold. Note that `zones` takes precedence over the
+         * negative color. Using `negativeColor` is equivalent to applying a
+         * zone with value of 0.
+         */
+        negativeColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock) Whether or not data-points with the value of
+         * `null` should be interactive. When this is set to `true`, tooltips
+         * may highlight these points, and this option also enables keyboard
+         * navigation for such points. Format options for such points include
+         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
+         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
+         */
+        nullInteraction?: (boolean|undefined);
+        /**
+         * (Highcharts) Options for the _Series on point_ feature. Only `pie`
+         * and `sunburst` series are supported at this moment.
+         */
+        onPoint?: (object|Highcharts.PlotScatter3dOnPointOptions);
+        /**
+         * (Highcharts) Opacity of a series parts: line, fill (e.g. area) and
+         * dataLabels.
+         */
+        opacity?: number;
+        /**
+         * (Highcharts) Properties for each single point.
+         */
+        point?: Highcharts.PlotSeriesPointOptions;
+        /**
+         * (Highcharts) Deprecated. Use
+         * series.accessibility.point.descriptionFormat instead.
+         *
+         * Same as accessibility.point.descriptionFormat, but for an individual
+         * series. Overrides the chart wide configuration.
+         *
+         * @deprecated 12.6.0
+         */
+        pointDescriptionFormat?: Function;
+        /**
+         * (Highcharts) Deprecated. Use
+         * series.accessibility.point.descriptionFormatter instead.
+         *
+         * Same as accessibility.series.descriptionFormatter, but for an
+         * individual series. Overrides the chart wide configuration.
+         *
+         * @deprecated 8.0.0
+         */
+        pointDescriptionFormatter?: Function;
+        /**
+         * (Highcharts, Highstock, Gantt) If no x values are given for the
+         * points in a series, `pointInterval` defines the interval of the x
+         * values. For example, if a series contains one value every decade
+         * starting from year 0, set `pointInterval` to `10`. In true `datetime`
+         * axes, the `pointInterval` is set in milliseconds.
+         *
+         * It can be also be combined with `pointIntervalUnit` to draw irregular
+         * time intervals.
+         *
+         * If combined with `relativeXValue`, an x value can be set on each
+         * point, and the `pointInterval` is added x times to the `pointStart`
+         * setting.
+         *
+         * Please note that this options applies to the _series data_, not the
+         * interval of the axis ticks, which is independent.
+         */
+        pointInterval?: number;
+        /**
+         * (Highcharts, Highstock, Gantt) On datetime series, this allows for
+         * setting the pointInterval to irregular time units, `day`, `month` and
+         * `year`. A day is usually the same as 24 hours, but
+         * `pointIntervalUnit` also takes the DST crossover into consideration
+         * when dealing with local time. Combine this option with
+         * `pointInterval` to draw weeks, quarters, 6 months, 10 years etc.
+         *
+         * Please note that this options applies to the _series data_, not the
+         * interval of the axis ticks, which is independent.
+         */
+        pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue;
+        /**
+         * (Highcharts, Highstock, Gantt) If no x values are given for the
+         * points in a series, `pointStart` defines on what value to start. For
+         * example, if a series contains one yearly value starting from 1945,
+         * set `pointStart` to 1945.
+         *
+         * The `pointStart` setting can be a number, or a datetime string that
+         * is parsed according to the `time.timezone` setting.
+         *
+         * If combined with `relativeXValue`, an x value can be set on each
+         * point. The x value from the point options is multiplied by
+         * `pointInterval` and added to `pointStart` to produce a modified x
+         * value.
+         */
+        pointStart?: (number|string);
+        /**
+         * (Highcharts, Highstock) When true, X values in the data set are
+         * relative to the current `pointStart`, `pointInterval` and
+         * `pointIntervalUnit` settings. This allows compression of the data for
+         * datasets with irregular X values.
+         *
+         * The real X values are computed on the formula `f(x) = ax + b`, where
+         * `a` is the `pointInterval` (optionally with a time unit given by
+         * `pointIntervalUnit`), and `b` is the `pointStart`.
+         */
+        relativeXValue?: boolean;
+        /**
+         * (Highcharts) Whether to select the series initially. If
+         * `showCheckbox` is true, the checkbox next to the series name in the
+         * legend will be checked for a selected series.
+         */
+        selected?: boolean;
+        /**
+         * (Highcharts) If true, a checkbox is displayed next to the legend item
+         * to allow selecting the series. The state of the checkbox is
+         * determined by the `selected` option.
+         */
+        showCheckbox?: boolean;
+        /**
+         * (Highcharts) Whether to display this particular series or series type
+         * in the legend. Standalone series are shown in legend by default, and
+         * linked series are not. Since v7.2.0 it is possible to show series
+         * that use colorAxis by setting this option to `true`.
+         */
+        showInLegend?: boolean;
+        /**
+         * (Highcharts) Deprecated. Use series.accessibility.keyboardNavigation
+         * instead.
+         *
+         * If set to `true`, the accessibility module will skip past the points
+         * in this series for keyboard navigation.
+         *
+         * @deprecated 8.0.0
+         */
+        skipKeyboardNavigation?: boolean;
+        /**
+         * (Highcharts, Highstock) When this is true, the series will not cause
+         * the Y axis to cross the zero plane (or threshold option) unless the
+         * data actually crosses the plane.
+         *
+         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
+         * will make the Y axis show negative values according to the
+         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
+         * at 0.
+         */
+        softThreshold?: boolean;
+        /**
+         * (Highcharts) Sonification/audio chart options for a series.
+         */
+        sonification?: Highcharts.SeriesSonificationOptions;
+        /**
+         * (Highcharts, Highstock) Whether to stack the values of each series on
+         * top of each other. Possible values are null to disable, `"normal"` to
+         * stack by value or `"percent"`.
+         *
+         * When stacking is enabled, data must be sorted in ascending X order.
+         *
+         * Some stacking options are related to specific series types. In the
+         * streamgraph series type, the stacking option is set to `"stream"`.
+         * The second one is `"overlap"`, which only applies to waterfall
+         * series.
+         */
+        stacking?: Highcharts.OptionsStackingValue;
+        /**
+         * (Highcharts) A collection of options for different series states.
+         *
+         * In addition to the options documented under each state, any option
+         * from the parent series type can be set, with exception of `data` and
+         * `states`.
+         */
+        states?: Highcharts.SeriesStatesOptionsObject;
+        /**
+         * (Highcharts, Highstock) Whether to apply steps to the line. Possible
+         * values are `left`, `center` and `right`.
+         */
+        step?: Highcharts.OptionsStepValue;
+        /**
+         * (Highcharts, Highstock, Highmaps) Sticky tracking of mouse events.
+         * When true, the `mouseOut` event on a series isn't triggered until the
+         * mouse moves over another series, or out of the plot area. When false,
+         * the `mouseOut` event on a series is triggered when the mouse leaves
+         * the area around the series' graph or markers. This also implies the
+         * tooltip. When `stickyTracking` is false and `tooltip.shared` is
+         * false, the tooltip will be hidden when moving the mouse between
+         * series.
+         */
+        stickyTracking?: boolean;
+        /**
+         * (Highcharts, Highstock) The threshold, also called zero level or base
+         * level. For line type series this is only used in conjunction with
+         * negativeColor.
+         */
+        threshold?: (number|null);
+        /**
+         * (Highcharts, Highstock, Highmaps) A configuration object for the
+         * tooltip rendering of each single series. Properties are inherited
+         * from tooltip. Overridable properties are `headerFormat`,
+         * `pointFormat`, `yDecimals`, `xDateFormat`, `yPrefix` and `ySuffix`.
+         * Unlike other series, in a scatter plot the series.name by default
+         * shows in the headerFormat and point.x and point.y in the pointFormat.
+         */
+        tooltip?: Highcharts.SeriesTooltipOptionsObject;
+        /**
+         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
+         * that is longer than this, the Series class looks for data
+         * configurations of plain numbers or arrays of numbers. The first and
+         * last valid points are checked. If found, the rest of the data is
+         * assumed to be the same. This saves expensive data checking and
+         * indexing in long series, and makes data-heavy charts render faster.
+         *
+         * Set it to `0` disable.
+         *
+         * Note:
+         *
+         * - In boost mode turbo threshold is forced. Only array of numbers or
+         * two dimensional arrays are allowed.
+         *
+         * - In version 11.4.3 and earlier, if object configurations were passed
+         * beyond the turbo threshold, a warning was logged in the console and
+         * the data series didn't render.
+         */
+        turboThreshold?: number;
+        /**
+         * (Highcharts) Set the initial visibility of the series.
+         */
+        visible?: boolean;
+        /**
+         * (Highcharts, Highstock) Defines the Axis on which the zones are
+         * applied.
+         */
+        zoneAxis?: string;
+        /**
+         * (Highcharts, Highstock) An array defining zones within a series.
+         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
+         * according to the `zoneAxis` option. The zone definitions have to be
+         * in ascending order regarding to the value.
+         *
+         * In styled mode, the color zones are styled with the
+         * `.highcharts-zone-{n}` class, or custom classed from the `className`
+         * option (view live demo).
+         */
+        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
+        /**
+         * (Highcharts) Whether to zoom non-cartesian series. If `chart.zooming`
+         * is set, the option allows to disable zooming on an individual
+         * non-cartesian series. By default zooming is enabled for all series.
+         *
+         * **Note**: This option works only for non-cartesian series.
+         */
+        zoomEnabled?: boolean;
     }
     /**
-     * (Highcharts, Highstock) Animation setting for hovering the graph in
-     * line-type series.
+     * (Highcharts, Highstock) Animation when not hovering over the marker.
      */
-    interface PlotScatter3dStatesHoverAnimationOptions {
+    interface PlotScatter3dStatesInactiveAnimationOptions {
         /**
          * (Highcharts, Highstock) The duration of the hover animation in
          * milliseconds. By default the hover state animates quickly in, and
@@ -115,143 +744,238 @@ declare module "../highcharts.src" {
         duration?: number;
     }
     /**
-     * (Highcharts, Highstock) Animation setting for hovering the graph in
-     * line-type series.
+     * (Highcharts, Highstock, Gantt) For series on datetime axes, the date
+     * format in the tooltip's header will by default be guessed based on the
+     * closest data points. This member gives the default string representations
+     * used for each unit. For an overview of the string or object
+     * configuration, see dateFormat.
      */
-    interface PlotScatter3dStatesSelectAnimationOptions {
-        /**
-         * (Highcharts, Highstock) The duration of the hover animation in
-         * milliseconds. By default the hover state animates quickly in, and
-         * slowly back to normal.
-         */
-        duration?: number;
+    interface PlotScatter3dTooltipDateTimeLabelFormatsOptions {
+        day?: string;
+        hour?: string;
+        millisecond?: string;
+        minute?: string;
+        month?: string;
+        second?: string;
+        week?: string;
+        year?: string;
     }
     /**
-     * (Highcharts, Highstock, Highmaps) Options for the tooltip header when
-     * tooltip.split is enabled. The header is the box containing the X value in
-     * a split tooltip.
+     * (Highcharts, Highstock, Highmaps) Positioning options for fixed tooltip,
+     * taking effect only when tooltip.fixed is `true`.
      */
-    interface PlotScatter3dTooltipHeaderOptions {
+    interface PlotScatter3dTooltipPositionOptions {
         /**
-         * (Highcharts, Highstock, Highmaps) Background color for the tooltip
-         * header when tooltip.split is enabled.
+         * (Highcharts, Highstock, Highmaps) The horizontal alignment of the
+         * fixed tooltip.
          */
-        backgroundColor?: Highcharts.ColorType;
+        align?: Highcharts.AlignValue;
         /**
-         * (Highcharts, Highstock, Highmaps) Border color for the tooltip header
-         * when tooltip.split is enabled.
+         * (Highcharts, Highstock, Highmaps) What the fixed tooltip alignment
+         * should be relative to.
+         *
+         * The default, `pane`, means that it is aligned within the plot area
+         * for that given series. If the tooltip is split (as default in Stock
+         * charts), each partial tooltip is aligned within the series' pane.
          */
-        borderColor?: Highcharts.ColorType;
+        relativeTo?: Highcharts.OptionsRelativeToValue;
         /**
-         * (Highcharts, Highstock, Highmaps) The width of the border for the
-         * tooltip header when tooltip.split is enabled.
+         * (Highcharts, Highstock, Highmaps) The vertical alignment of the fixed
+         * tooltip.
          */
-        borderWidth?: number;
+        verticalAlign?: Highcharts.VerticalAlignValue;
         /**
-         * (Highcharts, Highstock, Highmaps) Distance between the plot area and
-         * the header (except the chevron) in a split tooltip, in pixels. The
-         * default value makes the header text align with the axis labels.
+         * (Highcharts, Highstock, Highmaps) X pixel offset from the given
+         * position. Can be used to shy away from axis lines, grid lines etc to
+         * avoid the tooltip overlapping other elements.
          */
-        distance?: number;
+        x?: number;
         /**
-         * (Highcharts, Highstock, Highmaps) The name of a symbol to use for the
-         * border around the tooltip header. Applies only when tooltip.split is
-         * enabled.
-         *
-         * Custom callbacks for symbol path generation can also be added to
-         * `Highcharts.SVGRenderer.prototype.symbols` the same way as for
-         * series.marker.symbol.
+         * (Highcharts, Highstock, Highmaps) Y pixel offset from the given
+         * position. Can be used to shy away from axis lines, grid lines etc to
+         * avoid the tooltip overlapping other elements.
          */
-        shape?: string;
+        y?: number;
+    }
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotScatterClusterDataLabelsAnimationOptions {
         /**
-         * (Highcharts, Highstock, Highmaps) CSS styles for the tooltip header.
-         * The default is `{ fontSize: '1em' }`, ensuring that the header text
-         * is the same size as the axis labels.
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
          */
-        style?: object;
+        defer?: number;
     }
     /**
-     * (Highcharts, Highstock) Point accessibility options for a series.
+     * (Highcharts, Highstock, Highmaps, Gantt) Styles for the label. The
+     * default `color` setting is `"contrast"`, which is a pseudo color that
+     * Highcharts picks up and applies the maximum contrast to the underlying
+     * point item, for example the bar in a bar chart.
+     *
+     * The `textOutline` is a pseudo property that applies an outline of the
+     * given width with the given color, which by default is the maximum
+     * contrast to the text. So a bright text color will result in a black text
+     * outline for maximum readability on a mixed background. In some cases,
+     * especially with grayscale text, the text outline doesn't work well, in
+     * which cases it can be disabled by setting it to `"none"`. When `useHTML`
+     * is true, the `textOutline` will not be picked up. In this, case, the same
+     * effect can be achieved through the `text-shadow` CSS property. As a
+     * complementary or alternative to the `textOutline`, a
+     * `dataLabels.backgroundColor` can be used. It provides a more calm
+     * impression and ensures readable text label, at the cost of a risk of
+     * overshadowing the underlying chart elements.
+     *
+     * For some series types, where each point has an extent, like for example
+     * tree maps, the data label may overflow the point. There are two
+     * strategies for handling overflow. By default, the text will wrap to
+     * multiple lines. The other strategy is to set `style.textOverflow` to
+     * `ellipsis`, which will keep the text on one line plus it will break
+     * inside long words.
      */
-    interface PlotScatterAccessibilityPointOptions {
+    interface PlotScatterClusterDataLabelsStyleOptions {
+        color?: string;
+    }
+    /**
+     * (Highcharts, Highmaps) Options for layout algorithm. Inside there are
+     * options to change the type of the algorithm, gridSize, distance or
+     * iterations.
+     */
+    interface PlotScatterClusterLayoutAlgorithmOptions {
         /**
-         * (Highcharts, Highstock) Date format to use for points on datetime
-         * axes when describing them to screen reader users.
-         *
-         * Defaults to the same format as in tooltip.
-         *
-         * For an overview of the replacement codes, see dateFormat.
+         * (Highcharts, Highmaps) When `type` is set to `kmeans`, `distance` is
+         * a maximum distance between point and cluster center so that this
+         * point will be inside the cluster. The distance is either a number
+         * defining pixels or a percentage defining a percentage of the plot
+         * area width.
          */
-        dateFormat?: string;
+        distance?: (number|string);
         /**
-         * (Highcharts, Highstock) Formatter function to determine the date/time
-         * format used with points on datetime axes when describing them to
-         * screen reader users. Receives one argument, `point`, referring to the
-         * point to describe. Should return a date format string compatible with
-         * dateFormat.
+         * (Highcharts, Highmaps) When `type` is set to the `grid`, `gridSize`
+         * is a size of a grid square element either as a number defining
+         * pixels, or a percentage defining a percentage of the plot area width.
          */
-        dateFormatter?: Highcharts.ScreenReaderFormatterCallbackFunction<Highcharts.Point>;
+        gridSize?: (number|string);
         /**
-         * (Highcharts, Highstock) Whether or not to describe points with the
-         * value `null` to assistive technology, such as screen readers.
+         * (Highcharts, Highmaps) When `type` is set to `kmeans`, `iterations`
+         * are the number of iterations that this algorithm will be repeated to
+         * find clusters positions.
          */
-        describeNull?: boolean;
+        iterations?: number;
         /**
-         * (Highcharts, Highstock) A format string to use instead of the default
-         * for point descriptions.
+         * (Highcharts, Highmaps) When `type` is set to `undefined` and there
+         * are more visible points than the kmeansThreshold the `grid` algorithm
+         * is used to find clusters, otherwise `kmeans`. It ensures good
+         * performance on large datasets and better clusters arrangement after
+         * the zoom.
+         */
+        kmeansThreshold?: number;
+        /**
+         * (Highcharts, Highmaps) Type of the algorithm used to combine points
+         * into a cluster. There are three available algorithms:
+         *
+         * 1) `grid` - grid-based clustering technique. Points are assigned to
+         * squares of set size depending on their position on the plot area.
+         * Points inside the grid square are combined into a cluster. The grid
+         * size can be controlled by `gridSize` property (grid size changes at
+         * certain zoom levels).
          *
-         * The context of the format string is the point instance.
+         * 2) `kmeans` - based on K-Means clustering technique. In the first
+         * step, points are divided using the grid method (distance property is
+         * a grid size) to find the initial amount of clusters. Next, each point
+         * is classified by computing the distance between each cluster center
+         * and that point. When the closest cluster distance is lower than
+         * distance property set by a user the point is added to this cluster
+         * otherwise is classified as `noise`. The algorithm is repeated until
+         * each cluster center not change its previous position more than one
+         * pixel. This technique is more accurate but also more time consuming
+         * than the `grid` algorithm, especially for big datasets.
          *
-         * As opposed to accessibility.point.valueDescriptionFormat, this option
-         * replaces the whole description.
+         * 3) `optimizedKmeans` - based on K-Means clustering technique. This
+         * algorithm uses k-means algorithm only on the chart initialization or
+         * when chart extremes have greater range than on initialization. When a
+         * chart is redrawn the algorithm checks only clustered points distance
+         * from the cluster center and rebuild it when the point is spaced
+         * enough to be outside the cluster. It provides performance improvement
+         * and more stable clusters position yet can be used rather on small and
+         * sparse datasets.
+         *
+         * By default, the algorithm depends on visible quantity of points and
+         * `kmeansThreshold`. When there are more visible points than the
+         * `kmeansThreshold` the `grid` algorithm is used, otherwise `kmeans`.
+         *
+         * The custom clustering algorithm can be added by assigning a callback
+         * function as the type property. This function takes an array of
+         * `processedXData`, `processedYData`, `processedXData` indexes and
+         * `layoutAlgorithm` options as arguments and should return an object
+         * with grouped data.
+         *
+         * The algorithm should return an object like that: (see online
+         * documentation for example)
+         *
+         * `clusterId` (example above - unique id of a cluster or noise) is an
+         * array of points belonging to a cluster. If the array has only one
+         * point or fewer points than set in `cluster.minimumClusterSize` it
+         * won't be combined into a cluster.
          */
-        descriptionFormat?: string;
+        type?: (string|Function);
+    }
+    interface PlotScatterClusterStatesHoverOptions {
         /**
-         * (Highcharts, Highstock) Formatter function to use instead of the
-         * default for point descriptions. Same as
-         * `accessibility.point.descriptionFormatter`, but applies to a series
-         * instead of the whole chart.
-         *
-         * Note: Prefer using accessibility.point.valueDescriptionFormat instead
-         * if possible, as default functionality such as describing annotations
-         * will be preserved.
+         * (Highcharts, Highmaps) The fill color of the cluster marker in hover
+         * state. When `undefined`, the series' or point's fillColor for normal
+         * state is used.
          */
-        descriptionFormatter?: Highcharts.ScreenReaderFormatterCallbackFunction<Highcharts.Point>;
+        fillColor?: Highcharts.ColorType;
+    }
+    /**
+     * (Highcharts, Highmaps) An array defining zones within marker clusters.
+     *
+     * In styled mode, the color zones are styled with the
+     * `.highcharts-cluster-zone-{n}` class, or custom classed from the
+     * `className` option.
+     */
+    interface PlotScatterClusterZonesOptions {
         /**
-         * (Highcharts, Highstock) Decimals to use for the values in the point
-         * descriptions. Uses tooltip.valueDecimals if not defined.
+         * (Highcharts, Highmaps) Styled mode only. A custom class name for the
+         * zone.
          */
-        valueDecimals?: number;
+        className?: string;
         /**
-         * (Highcharts, Highstock) Format to use for describing the values of
-         * data points to assistive technology - including screen readers. The
-         * point context is available as `{point}`.
-         *
-         * Other available context variables include `{index}`, `{value}`, and
-         * `{xDescription}`.
-         *
-         * Additionally, the series name, annotation info, and description added
-         * in `point.accessibility.description` is added by default if relevant.
-         * To override this, use the accessibility.point.descriptionFormatter
-         * option.
+         * (Highcharts, Highmaps) The value where the zone starts.
          */
-        valueDescriptionFormat?: string;
+        from?: number;
         /**
-         * (Highcharts, Highstock) Prefix to add to the values in the point
-         * descriptions. Uses tooltip.valuePrefix if not defined.
+         * (Highcharts, Highmaps) Settings for the cluster marker belonging to
+         * the zone.
          */
-        valuePrefix?: string;
+        marker?: Highcharts.PointMarkerOptionsObject;
         /**
-         * (Highcharts, Highstock) Suffix to add to the values in the point
-         * descriptions. Uses tooltip.valueSuffix if not defined.
+         * (Highcharts, Highmaps) The value where the zone ends.
          */
-        valueSuffix?: string;
+        to?: number;
     }
     /**
-     * (Highcharts, Highstock, Highmaps, Gantt) Options for the cluster data
-     * labels.
+     * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+     * labels, appearing next to each data point.
+     *
+     * Since v6.2.0, multiple data labels can be applied to each single point by
+     * defining them as an array of configs.
+     *
+     * In styled mode, the data labels can be styled with the
+     * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+     * (see example).
      */
-    interface PlotScatterClusterDataLabelsOptions {
+    interface PlotScatterDataLabelsOptions {
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) The alignment of the data
          * label compared to the point. If `right`, the right side of the label
@@ -260,7 +984,7 @@ declare module "../highcharts.src" {
          * as given with the inside option. Can be one of `left`, `center` or
          * `right`.
          */
-        align?: string;
+        align?: (Highcharts.AlignValue|null);
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) Alignment method for data
          * labels. If set to `plotEdges`, the labels are aligned within the plot
@@ -288,7 +1012,7 @@ declare module "../highcharts.src" {
          *
          * - `defer`: The animation delay time in milliseconds.
          */
-        animation?: (boolean|Highcharts.PlotScatterClusterDataLabelsAnimationOptions|Partial<Highcharts.AnimationOptionsObject>);
+        animation?: (boolean|Highcharts.PlotScatterDataLabelsAnimationOptions|Partial<Highcharts.AnimationOptionsObject>);
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) The background color or
          * gradient for the data label. In addition to regular colors, there are
@@ -440,7 +1164,7 @@ declare module "../highcharts.src" {
          * of two numbers repeats the values for the horizontal and vertical
          * sides.
          */
-        padding?: object;
+        padding?: (number|Array<number>);
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) Aligns data labels relative
          * to points. If `center` alignment is not possible, it defaults to
@@ -492,7 +1216,7 @@ declare module "../highcharts.src" {
          * to `ellipsis`, which will keep the text on one line plus it will
          * break inside long words.
          */
-        style?: (Highcharts.CSSObject|Highcharts.PlotScatterClusterDataLabelsStyleOptions);
+        style?: Highcharts.CSSObject;
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) Options for a label text
          * which should follow marker's shape. Border and background are
@@ -517,7 +1241,7 @@ declare module "../highcharts.src" {
          * value depends on the data, for instance in a column chart, the label
          * is above positive values and below negative values.
          */
-        verticalAlign?: string;
+        verticalAlign?: (Highcharts.VerticalAlignValue|null);
         /**
          * (Highcharts, Highstock, Highmaps, Gantt) The x position offset of the
          * label relative to the point in pixels.
@@ -537,129 +1261,39 @@ declare module "../highcharts.src" {
          */
         zIndex?: number;
     }
-    interface PlotScatterClusterEventsOptions {
-        /**
-         * (Highcharts, Highmaps) Fires when the cluster point is clicked and
-         * `drillToCluster` is enabled. One parameter, `event`, is passed to the
-         * function. The default action is to zoom to the cluster points range.
-         * This can be prevented by calling `event.preventDefault()`.
-         */
-        drillToCluster?: Highcharts.MarkerClusterDrillCallbackFunction;
-    }
-    /**
-     * (Highcharts, Highmaps) Options for marker clusters, the concept of
-     * sampling the data values into larger blocks in order to ease readability
-     * and increase performance of the JavaScript charts.
-     *
-     * Note: marker clusters module is not working with `boost` and
-     * `draggable-points` modules.
-     *
-     * The marker clusters feature requires the marker-clusters.js file to be
-     * loaded, found in the modules directory of the download package, or online
-     * at code.highcharts.com/modules/marker-clusters.js.
-     */
-    interface PlotScatterClusterOptions {
-        /**
-         * (Highcharts, Highmaps) When set to `false` prevent cluster
-         * overlapping - this option works only when `layoutAlgorithm.type =
-         * "grid"`.
-         */
-        allowOverlap?: boolean;
-        /**
-         * (Highcharts, Highmaps) Options for the cluster marker animation.
-         */
-        animation?: (boolean|Partial<Highcharts.AnimationOptionsObject>);
-        /**
-         * (Highcharts, Highstock, Highmaps, Gantt) Options for the cluster data
-         * labels.
-         */
-        dataLabels?: (Highcharts.DataLabelsOptions|Highcharts.PlotScatterClusterDataLabelsOptions);
-        /**
-         * (Highcharts, Highmaps) Zoom the plot area to the cluster points range
-         * when a cluster is clicked.
-         */
-        drillToCluster?: boolean;
-        /**
-         * (Highcharts, Highmaps) Whether to enable the marker-clusters module.
-         */
-        enabled?: boolean;
-        events?: Highcharts.PlotScatterClusterEventsOptions;
-        /**
-         * (Highcharts, Highmaps) Options for layout algorithm. Inside there are
-         * options to change the type of the algorithm, gridSize, distance or
-         * iterations.
-         */
-        layoutAlgorithm?: Highcharts.PlotScatterClusterLayoutAlgorithmOptions;
-        /**
-         * (Highcharts, Highmaps) Options for the cluster marker.
-         */
-        marker?: Highcharts.PointMarkerOptionsObject;
-        /**
-         * (Highcharts, Highmaps) The minimum amount of points to be combined
-         * into a cluster. This value has to be greater or equal to 2.
-         */
-        minimumClusterSize?: number;
-        states?: Highcharts.PlotScatterClusterStatesOptions;
-        /**
-         * (Highcharts, Highmaps) An array defining zones within marker
-         * clusters.
-         *
-         * In styled mode, the color zones are styled with the
-         * `.highcharts-cluster-zone-{n}` class, or custom classed from the
-         * `className` option.
-         */
-        zones?: Array<Highcharts.PlotScatterClusterZonesOptions>;
-    }
-    interface PlotScatterClusterStatesOptions {
-        hover?: Highcharts.PlotScatterClusterStatesHoverOptions;
-    }
     /**
-     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
-     * animation when a series is displayed for the `dataLabels`. The animation
-     * can also be set as a configuration object. Please note that this option
-     * only applies to the initial animation.
+     * (Highcharts, Highstock) Apply a jitter effect for the rendered markers.
+     * When plotting discrete values, a little random noise may help telling the
+     * points apart. The jitter setting applies a random displacement of up to
+     * `n` axis units in either direction. So for example on a horizontal X
+     * axis, setting the `jitter.x` to 0.24 will render the point in a random
+     * position between 0.24 units to the left and 0.24 units to the right of
+     * the true axis position. On a category axis, setting it to 0.5 will fill
+     * up the bin and make the data appear continuous.
      *
-     * For other animations, see chart.animation and the animation parameter
-     * under the API methods. The following properties are supported:
+     * When rendered on top of a box plot or a column series, a jitter value of
+     * 0.24 will correspond to the underlying series' default groupPadding and
+     * pointPadding settings.
      *
-     * - `defer`: The animation delay time in milliseconds.
-     */
-    interface PlotScatterDataLabelsAnimationOptions {
-        /**
-         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
-         * milliseconds. Set to `0` to render the data labels immediately. As
-         * `undefined` inherits defer time from the series.animation.defer.
-         */
-        defer?: number;
-    }
-    /**
-     * (Highcharts, Highstock) Options for series data sorting.
+     * **Note:** With boost mode enabled, the jitter effect is not supported.
      */
-    interface PlotScatterDataSortingOptions {
+    interface PlotScatterJitterOptions {
         /**
-         * (Highcharts, Highstock) Enable or disable data sorting for the
-         * series. Use xAxis.reversed to change the sorting order.
+         * (Highcharts, Highstock) The maximal X offset for the random jitter
+         * effect.
          */
-        enabled?: boolean;
-        /**
-         * (Highcharts, Highstock) Whether to allow matching points by name in
-         * an update. If this option is disabled, points will be matched by
-         * order.
-         */
-        matchByName?: boolean;
+        x?: number;
         /**
-         * (Highcharts, Highstock) Determines what data value should be used to
-         * sort by.
+         * (Highcharts, Highstock) The maximal Y offset for the random jitter
+         * effect.
          */
-        sortKey?: string;
+        y?: number;
     }
     /**
-     * (Highcharts, Highstock, Gantt) Styles for the series label. The color
-     * defaults to the series color, or a contrast color if `onArea`.
+     * (Highcharts, Highstock) Animation when hovering over the marker.
      */
-    interface PlotScatterLabelStyleOptions {
-        fontSize?: number;
-        fontWeight?: string;
+    interface PlotScatterMarkerStatesHoverAnimationOptions {
+        duration?: number;
     }
     /**
      * (Highcharts, Highstock) Options for the connector in the _Series on
@@ -800,62 +1434,34 @@ declare module "../highcharts.src" {
         defer?: number;
     }
     /**
-     * (Highcharts) A `scatter3d` series. If the type option is not specified,
-     * it is inherited from chart.type.
-     *
-     * Configuration options for the series are given in three levels:
-     *
-     * 1. Options for all series in a chart are defined in the
-     * plotOptions.series object.
-     *
-     * 2. Options for all `scatter3d` series are defined in
-     * plotOptions.scatter3d.
-     *
-     * 3. Options for one single series are given in the series instance array.
-     * (see online documentation for example)
-     *
-     * **TypeScript:**
-     *
-     * - type option should always be set, otherwise a broad set of unsupported
-     * options is allowed.
-     *
-     * - when accessing an array of series, the combined set of all series types
-     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
-     * specific type can be done by checking the `type` property. (see online
-     * documentation for example)
+     * (Highcharts, Highstock) Animation when hovering over the marker.
+     */
+    interface SeriesScatter3dDataMarkerStatesSelectAnimationOptions {
+        duration?: number;
+    }
+    /**
+     * (Highcharts, Highstock, Gantt) Enable or disable the initial animation
+     * when a series is displayed for the `dataLabels`. The animation can also
+     * be set as a configuration object. Please note that this option only
+     * applies to the initial animation.
      *
-     * You have to extend the `SeriesScatter3dOptions` via an interface to allow
-     * custom properties: ``` declare interface SeriesScatter3dOptions {
-     * customProperty: string; }
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
      *
+     * - `defer`: The animation delay time in milliseconds.
      */
-    interface SeriesScatter3dOptions extends Highcharts.PlotScatter3dOptions, Highcharts.SeriesOptions {
+    interface SeriesScatterDataDataLabelsAnimationOptions {
         /**
-         * (Highcharts) An array of data points for the series. For the
-         * `scatter3d` series type, points can be given in the following ways:
-         *
-         * 1. An array of arrays with 3 values. In this case, the values
-         * correspond to `x,y,z`. If the first value is a string, it is applied
-         * as the name of the point, and the `x` value is inferred. (see online
-         * documentation for example)
-         *
-         * 3. An array of objects with named values. The following snippet shows
-         * only a few settings, see the complete options set below. If the total
-         * number of data points exceeds the series' turboThreshold, this option
-         * is not available. (see online documentation for example)
-         */
-        data?: Array<(Array<number>|Highcharts.PointOptionsObject)>;
-        /**
-         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
-         * TypeScript non-optional and might be `undefined` in series objects
-         * from unknown sources.
+         * (Highcharts, Highstock, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
          */
-        type: "scatter3d";
+        defer?: number;
     }
     /**
      * (Highcharts, Highstock) Animation when hovering over the marker.
      */
-    interface SeriesScatterDataMarkerStatesHoverAnimationOptions {
+    interface SeriesScatterDataMarkerStatesSelectAnimationOptions {
         duration?: number;
     }
 }