highcharts 13.0.0 → 13.0.2

package/options/bullet.src.d.ts

@@ -6,865 +6,502 @@
 import * as Highcharts from "../highcharts.src";
 declare module "../highcharts.src" {
     /**
-     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
-     * animation when a series is displayed for the `dataLabels`. The animation
-     * can also be set as a configuration object. Please note that this option
-     * only applies to the initial animation.
-     *
-     * For other animations, see chart.animation and the animation parameter
-     * under the API methods. The following properties are supported:
-     *
-     * - `defer`: The animation delay time in milliseconds.
-     */
-    interface PlotBulletDataLabelsAnimationOptions {
-        /**
-         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
-         * milliseconds. Set to `0` to render the data labels immediately. As
-         * `undefined` inherits defer time from the series.animation.defer.
-         */
-        defer?: number;
-    }
-    /**
-     * (Highcharts, Highstock, Gantt) Styles for the series label. The color
-     * defaults to the series color, or a contrast color if `onArea`.
-     */
-    interface PlotBulletLabelStyleOptions {
-        fontSize?: number;
-        fontWeight?: string;
-    }
-    /**
-     * (Highcharts) Options for the _Series on point_ feature. Only `pie` and
-     * `sunburst` series are supported at this moment.
-     */
-    interface PlotBulletOnPointOptions {
-        /**
-         * (Highcharts) Options for the connector in the _Series on point_
-         * feature.
-         *
-         * In styled mode, the connector can be styled with the
-         * `.highcharts-connector-seriesonpoint` class name.
-         */
-        connectorOptions?: (Highcharts.PlotBulletOnPointConnectorOptions|Highcharts.SVGAttributes);
-        /**
-         * (Highcharts) The `id` of the point that we connect the series to.
-         * Only points with a given `plotX` and `plotY` values and map points
-         * are valid.
-         */
-        id?: string;
-        /**
-         * (Highcharts) Options allowing to set a position and an offset of the
-         * series in the _Series on point_ feature.
-         */
-        position?: (object|Highcharts.PlotBulletOnPointPositionOptions);
-    }
-    /**
-     * (Highcharts) A bullet graph is a variation of a bar graph. The bullet
-     * graph features a single measure, compares it to a target, and displays it
-     * in the context of qualitative ranges of performance that could be set
-     * using plotBands on yAxis.
-     *
-     * Configuration options for the series are given in three levels:
-     *
-     * 1. Options for all series in a chart are defined in the
-     * plotOptions.series object.
-     *
-     * 2. Options for all `bullet` series are defined in plotOptions.bullet.
-     *
-     * 3. Options for one single series are given in the series instance array.
-     * (see online documentation for example)
-     *
-     * **TypeScript:**
-     *
-     * - type option should always be set, otherwise a broad set of unsupported
-     * options is allowed.
-     *
-     * - when accessing an array of series, the combined set of all series types
-     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
-     * specific type can be done by checking the `type` property. (see online
-     * documentation for example)
+     * (Highcharts) Point accessibility options for a series.
      */
-    interface PlotBulletOptions {
-        /**
-         * (Highcharts) Accessibility options for a series.
-         */
-        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
+    interface PlotBulletAccessibilityPointOptions {
         /**
-         * (Highcharts) Allow this series' points to be selected by clicking on
-         * the graphic (columns, point markers, pie slices, map areas etc).
+         * (Highcharts) Date format to use for points on datetime axes when
+         * describing them to screen reader users.
          *
-         * The selected points can be handled by point select and unselect
-         * events, or collectively by the getSelectedPoints function.
+         * Defaults to the same format as in tooltip.
          *
-         * And alternative way of selecting points is through dragging.
+         * For an overview of the replacement codes, see dateFormat.
          */
-        allowPointSelect?: boolean;
+        dateFormat?: string;
         /**
-         * (Highcharts) Enable or disable the initial animation when a series is
-         * displayed. The animation can also be set as a configuration object.
-         * Please note that this option only applies to the initial animation of
-         * the series itself. For other animations, see chart.animation and the
-         * animation parameter under the API methods. The following properties
-         * are supported:
-         *
-         * - `defer`: The animation delay time in milliseconds.
-         *
-         * - `duration`: The duration of the animation in milliseconds.
-         * (Defaults to `1000`)
-         *
-         * - `easing`: Can be a string reference to an easing function set on
-         * the `Math` object or a function. See the _Custom easing function_
-         * demo below. (Defaults to `easeInOutSine`)
-         *
-         * Due to poor performance, animation is disabled in old IE browsers for
-         * several chart types.
+         * (Highcharts) Formatter function to determine the date/time format
+         * used with points on datetime axes when describing them to screen
+         * reader users. Receives one argument, `point`, referring to the point
+         * to describe. Should return a date format string compatible with
+         * dateFormat.
          */
-        animation?: (boolean|Highcharts.AnimationOptionsObject);
+        dateFormatter?: Highcharts.ScreenReaderFormatterCallbackFunction<Highcharts.Point>;
         /**
-         * (Highcharts) For some series, there is a limit that shuts down
-         * animation by default when the total number of points in the chart is
-         * too high. For example, for a column chart and its derivatives,
-         * animation does not run if there is more than 250 points totally. To
-         * disable this cap, set `animationLimit` to `Infinity`. This option
-         * works if animation is fired on individual points, not on a group of
-         * points like e.g. during the initial animation.
+         * (Highcharts) Whether or not to describe points with the value `null`
+         * to assistive technology, such as screen readers.
          */
-        animationLimit?: number;
+        describeNull?: boolean;
         /**
-         * (Highcharts, Highstock, Gantt) The color of the border surrounding
-         * each column or bar.
+         * (Highcharts) A format string to use instead of the default for point
+         * descriptions.
          *
-         * In styled mode, the border stroke can be set with the
-         * `.highcharts-point` rule.
-         */
-        borderColor?: Highcharts.ColorType;
-        /**
-         * (Highcharts, Highstock, Gantt) The corner radius of the border
-         * surrounding each column or bar. A number signifies pixels. A
-         * percentage string, like for example `50%`, signifies a relative size.
-         * For columns this is relative to the column width, for pies it is
-         * relative to the radius and the inner radius.
-         */
-        borderRadius?: (number|string|Highcharts.BorderRadiusOptionsObject);
-        /**
-         * (Highcharts, Highstock, Gantt) The width of the border surrounding
-         * each column or bar. Defaults to `1` when there is room for a border,
-         * but to `0` when the columns are so dense that a border would cover
-         * the next column.
+         * The context of the format string is the point instance.
          *
-         * In styled mode, the stroke width can be set with the
-         * `.highcharts-point` rule.
+         * As opposed to accessibility.point.valueDescriptionFormat, this option
+         * replaces the whole description.
          */
-        borderWidth?: number;
+        descriptionFormat?: string;
         /**
-         * (Highcharts, Highstock, Gantt) When `true`, the columns will center
-         * in the category, ignoring null or missing points. When `false`, space
-         * will be reserved for null or missing points.
-         */
-        centerInCategory?: boolean;
-        /**
-         * (Highcharts) An additional class name to apply to the series'
-         * graphical elements. This option does not replace default class names
-         * of the graphical element. Changes to the series' color will also be
-         * reflected in a chart's legend and tooltip.
-         */
-        className?: string;
-        /**
-         * (Highcharts) Disable this option to allow series rendering in the
-         * whole plotting area.
+         * (Highcharts) Formatter function to use instead of the default for
+         * point descriptions. Same as
+         * `accessibility.point.descriptionFormatter`, but applies to a series
+         * instead of the whole chart.
          *
-         * **Note:** Clipping should be always enabled when chart.zoomType is
-         * set
+         * Note: Prefer using accessibility.point.valueDescriptionFormat instead
+         * if possible, as default functionality such as describing annotations
+         * will be preserved.
          */
-        clip?: boolean;
+        descriptionFormatter?: Highcharts.ScreenReaderFormatterCallbackFunction<Highcharts.Point>;
         /**
-         * (Highcharts) The main color of the series. In line type series it
-         * applies to the line and the point markers unless otherwise specified.
-         * In bar type series it applies to the bars unless a color is specified
-         * per point. The default value is pulled from the `options.colors`
-         * array.
-         *
-         * In styled mode, the color can be defined by the colorIndex option.
-         * Also, the series color can be set with the `.highcharts-series`,
-         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
-         * `.highcharts-series-{n}` class, or individual classes given by the
-         * `className` option.
+         * (Highcharts) Decimals to use for the values in the point
+         * descriptions. Uses tooltip.valueDecimals if not defined.
          */
-        color?: Highcharts.ColorType;
+        valueDecimals?: number;
         /**
-         * (Highcharts, Highstock, Gantt) When using automatic point colors
-         * pulled from the global colors or series-specific
-         * plotOptions.column.colors collections, this option determines whether
-         * the chart should receive one color per series or one color per point.
+         * (Highcharts) Format to use for describing the values of data points
+         * to assistive technology - including screen readers. The point context
+         * is available as `{point}`.
          *
-         * In styled mode, the `colors` or `series.colors` arrays are not
-         * supported, and instead this option gives the points individual color
-         * class names on the form `highcharts-color-{n}`.
-         */
-        colorByPoint?: boolean;
-        /**
-         * (Highcharts) Styled mode only. A specific color index to use for the
-         * series, so its graphic representations are given the class name
-         * `highcharts-color-{n}`.
+         * Other available context variables include `{index}`, `{value}`, and
+         * `{xDescription}`.
          *
-         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
-         * changing the color scheme very convenient.
+         * Additionally, the series name, annotation info, and description added
+         * in `point.accessibility.description` is added by default if relevant.
+         * To override this, use the accessibility.point.descriptionFormatter
+         * option.
          */
-        colorIndex?: number;
+        valueDescriptionFormat?: string;
         /**
-         * (Highcharts, Highstock, Highmaps) Determines what data value should
-         * be used to calculate point color if `colorAxis` is used. Requires to
-         * set `min` and `max` if some custom point property is used or if
-         * approximation for data grouping is set to `'sum'`.
+         * (Highcharts) Prefix to add to the values in the point descriptions.
+         * Uses tooltip.valuePrefix if not defined.
          */
-        colorKey?: string;
+        valuePrefix?: string;
         /**
-         * (Highcharts, Highstock, Gantt) A series specific or series type
-         * specific color set to apply instead of the global colors when
-         * colorByPoint is true.
+         * (Highcharts) Suffix to add to the values in the point descriptions.
+         * Uses tooltip.valueSuffix if not defined.
          */
-        colors?: Array<Highcharts.ColorType>;
-        /**
-         * (Highcharts, Highstock, Gantt) When true, each point or column edge
-         * is rounded to its nearest pixel in order to render sharp on screen.
-         * In some cases, when there are a lot of densely packed columns, this
-         * leads to visible difference in column widths or distance between
-         * columns. In these cases, setting `crisp` to `false` may look better,
-         * even though each column is rendered blurry.
-         */
-        crisp?: boolean;
-        /**
-         * (Highcharts, Highstock, Gantt) When the series contains less points
-         * than the crop threshold, all points are drawn, even if the points
-         * fall outside the visible plot area at the current zoom. The advantage
-         * of drawing all points (including markers and columns), is that
-         * animation is performed on updates. On the other hand, when the series
-         * contains more points than the crop threshold, the series data is
-         * cropped to only contain points that fall within the plot area. The
-         * advantage of cropping away invisible points is to increase
-         * performance on large series.
-         */
-        cropThreshold?: number;
+        valueSuffix?: string;
+    }
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+     * labels, appearing next to each data point.
+     *
+     * Since v6.2.0, multiple data labels can be applied to each single point by
+     * defining them as an array of configs.
+     *
+     * In styled mode, the data labels can be styled with the
+     * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+     * (see example).
+     */
+    interface PlotBulletDataLabelsOptions {
         /**
-         * (Highcharts) You can set the cursor to "pointer" if you have click
-         * events attached to the series, to signal to the user that the points
-         * and lines can be clicked.
-         *
-         * In styled mode, the series cursor can be set with the same classes as
-         * listed under series.color.
+         * (Highcharts, Highstock, Highmaps, Gantt) The alignment of the data
+         * label compared to the point. If `right`, the right side of the label
+         * should be touching the point. For points with an extent, like
+         * columns, the alignments also dictates how to align it inside the box,
+         * as given with the inside option. Can be one of `left`, `center` or
+         * `right`.
          */
-        cursor?: (string|Highcharts.CursorValue);
+        align?: string;
         /**
-         * (Highcharts) A reserved subspace to store options and values for
-         * customized functionality. Here you can add additional data for your
-         * own event callbacks and formatter callbacks.
+         * (Highcharts, Highstock, Highmaps, Gantt) Alignment method for data
+         * labels. If set to `plotEdges`, the labels are aligned within the plot
+         * area in the direction of the y-axis. So in a regular column chart,
+         * the labels are aligned vertically according to the `verticalAlign`
+         * setting. In a bar chart, which is inverted, the labels are aligned
+         * horizontally according to the `align` setting. Applies to cartesian
+         * series only.
          */
-        custom?: Highcharts.Dictionary<any>;
+        alignTo?: string;
         /**
-         * (Highcharts) Name of the dash style to use for the graph, or for some
-         * series types the outline of each shape.
-         *
-         * In styled mode, the stroke dash-array can be set with the same
-         * classes as listed under series.color.
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to allow data labels
+         * to overlap. To make the labels less sensitive for overlapping, the
+         * dataLabels.padding can be set to 0.
          */
-        dashStyle?: Highcharts.DashStyleValue;
+        allowOverlap?: boolean;
         /**
-         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
-         * labels, appearing next to each data point.
-         *
-         * Since v6.2.0, multiple data labels can be applied to each single
-         * point by defining them as an array of configs.
-         *
-         * In styled mode, the data labels can be styled with the
-         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
-         * (see example).
-         */
-        dataLabels?: (Highcharts.PlotBulletDataLabelsOptions|Array<Highcharts.PlotBulletDataLabelsOptions>);
-        /**
-         * (Highcharts) The mapping between the data table and the series data
-         * points. This is used in conjunction with the `dataTable` option (on
-         * chart or series level) to map columns from the data table to the
-         * properties of the data points. The keys of the `dataMapping` object
-         * correspond to the properties of the data points (e.g. `x`, `y`,
-         * `name`), and the values are objects that specify which column from
-         * which data table to use for that property.
+         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the
+         * initial animation when a series is displayed for the `dataLabels`.
+         * The animation can also be set as a configuration object. Please note
+         * that this option only applies to the initial animation.
          *
-         * The keys can also be nested paths, for example `dataLabel.format`, to
-         * map to nested properties of the data points.
+         * For other animations, see chart.animation and the animation parameter
+         * under the API methods. The following properties are supported:
          *
-         * The values can also be strings, in which case they are interpreted as
-         * column id's from the first data table.
-         *
-         * A typical use case is that multiple series share a common column,
-         * like `name` or `x`. In this case, to avoid repetition, the common
-         * column can be applied in `plotOptions.series.dataMapping` and the
-         * individual series can specify only the columns that are unique to
-         * them.
-         *
-         * The series name defaults to the column ID of the main data column in
-         * the mapping. The main data column is typically the `y` data for
-         * cartesian series, or `value` for map series. For example, if the
-         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
-         * online documentation for example)
-         *
-         * If the columns of the DataTable have keys matching the series keys,
-         * the data mapping is not necessary. For example, this DataTable will
-         * connect directly to the series' `x` and `y` keys: (see online
-         * documentation for example)
-         */
-        dataMapping?: Highcharts.DataMappingOptionsObject;
-        /**
-         * (Highcharts) Depth of the columns in a 3D column chart.
+         * - `defer`: The animation delay time in milliseconds.
          */
-        depth?: number;
+        animation?: (boolean|Highcharts.PlotBulletDataLabelsAnimationOptions|Partial<Highcharts.AnimationOptionsObject>);
         /**
-         * (Highcharts) Deprecated. Use
-         * plotOptions.series.accessibility.description instead.
-         *
-         * A description of the series to add to the screen reader information
-         * about the series.
+         * (Highcharts, Highstock, Highmaps, Gantt) The background color or
+         * gradient for the data label. In addition to regular colors, there are
+         * two special setting for this option:
          *
-         * @deprecated 8.0.0
-         */
-        description?: string;
-        /**
-         * (Highcharts) The draggable-points module allows points to be moved
-         * around or modified in the chart. In addition to the options mentioned
-         * under the `dragDrop` API structure, the module fires three events,
-         * point.dragStart, point.drag and point.drop.
-         */
-        dragDrop?: Highcharts.SeriesDragDropOptionsObject;
-        /**
-         * (Highcharts) 3D columns only. The color of the edges. Similar to
-         * `borderColor`, except it defaults to the same color as the column.
-         */
-        edgeColor?: Highcharts.ColorString;
-        /**
-         * (Highcharts) 3D columns only. The width of the colored edges.
-         */
-        edgeWidth?: number;
-        /**
-         * (Highcharts) Enable or disable the mouse tracking for a specific
-         * series. This includes point tooltips and click events on graphs and
-         * points. For large datasets it improves performance.
-         */
-        enableMouseTracking?: boolean;
-        /**
-         * (Highcharts) General event handlers for the series items. These event
-         * hooks can also be attached to the series at run time using the
-         * `Highcharts.addEvent` function.
-         */
-        events?: Highcharts.SeriesEventsOptionsObject;
-        /**
-         * (Highcharts) Determines whether the series should look for the
-         * nearest point in both dimensions or just the x-dimension when
-         * hovering the series. Defaults to `'xy'` for scatter series and `'x'`
-         * for most other series. If the data has duplicate x-values, it is
-         * recommended to set this to `'xy'` to allow hovering over all points.
+         * - `auto` will set the background color the point's color.
          *
-         * Applies only to series types using nearest neighbor search (not
-         * direct hover) for tooltip.
+         * - `contrast` will set it to a contrast against the text color, with
+         * an opacity allowing to see the underlying content. The contrast is
+         * great enough to ensure readability for the text according to
+         * accessibility standards.
          */
-        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
+        backgroundColor?: Highcharts.ColorType;
         /**
-         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
-         * total chart width or only the zoomed area when zooming in on parts of
-         * the X axis. By default, the Y axis adjusts to the min and max of the
-         * visible data. Cartesian series only.
+         * (Highcharts, Highstock, Highmaps, Gantt) The border color for the
+         * data label. Setting it to `auto` will use the point's color. Defaults
+         * to `undefined`.
          */
-        getExtremesFromAll?: boolean;
+        borderColor?: Highcharts.ColorType;
         /**
-         * (Highcharts, Highstock, Gantt) Whether to group non-stacked columns
-         * or to let them render independent of each other. Non-grouped columns
-         * will be laid out individually and overlap each other.
+         * (Highcharts, Highstock, Highmaps, Gantt) The border radius in pixels
+         * for the data label.
          */
-        grouping?: boolean;
+        borderRadius?: number;
         /**
-         * (Highcharts, Highstock, Gantt) Padding between each value groups, in
-         * x axis units.
+         * (Highcharts, Highstock, Highmaps, Gantt) The border width in pixels
+         * for the data label.
          */
-        groupPadding?: number;
+        borderWidth?: number;
         /**
-         * (Highcharts) The spacing between columns on the Z Axis in a 3D chart.
+         * (Highcharts, Highstock, Highmaps, Gantt) A class name for the data
+         * label. Particularly in styled mode, this can be used to give each
+         * series' or point's data label unique styling. In addition to this
+         * option, a default color class name is added so that we can give the
+         * labels a contrast text shadow.
          */
-        groupZPadding?: number;
+        className?: string;
         /**
-         * (Highcharts) Highlight only the hovered point and fade the remaining
-         * points.
+         * (Highcharts, Highstock, Highmaps, Gantt) This options is deprecated.
+         * Use style.color instead.
          *
-         * Scatter-type series require enabling the 'inactive' marker state and
-         * adjusting opacity. Note that this approach could affect performance
-         * with large datasets.
-         */
-        inactiveOtherPoints?: boolean;
-        /**
-         * (Highcharts) When set to `false` will prevent the series data from
-         * being included in any form of data export.
+         * The text color for the data labels. Defaults to `undefined`. For
+         * certain series types, like column or map, the data labels can be
+         * drawn inside the points. In this case the data label will be drawn
+         * with maximum contrast by default. Additionally, it will be given a
+         * `text-outline` style with the opposite color, to further increase the
+         * contrast. This can be overridden by setting the `text-outline` style
+         * to `none` in the `dataLabels.style` option.
          *
-         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
-         * as `includeInCSVExport`.
+         * @deprecated 10.3.0
          */
-        includeInDataExport?: boolean;
+        color?: Highcharts.ColorType;
         /**
-         * (Highcharts) An array specifying which option maps to which key in
-         * the data point array. This makes it convenient to work with
-         * unstructured data arrays from different sources.
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to hide data labels
+         * that are outside the plot area. By default, the data label is moved
+         * inside the plot area according to the overflow option.
          */
-        keys?: Array<string>;
+        crop?: boolean;
         /**
-         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
-         * the series as possible in a natural way, seeking to avoid other
-         * series. The goal of this feature is to make the chart more easily
-         * readable, like if a human designer placed the labels in the optimal
-         * position.
-         *
-         * The series labels currently work with series types having a `graph`
-         * or an `area`.
+         * (Highcharts, Highstock, Gantt) Whether to defer displaying the data
+         * labels until the initial series animation has finished. Setting to
+         * `false` renders the data label immediately. If set to `true` inherits
+         * the defer time set in plotOptions.series.animation.
          */
-        label?: Highcharts.SeriesLabelOptionsObject;
+        defer?: boolean;
         /**
-         * (Highcharts) What type of legend symbol to render for this series.
-         * Can be one of `areaMarker`, `lineMarker` or `rectangle`.
+         * (Highcharts, Highstock, Gantt) The distance of the data label from
+         * the data point. Note that the `padding` setting also affects the
+         * rendered distance, but is not visible unless the data label has a
+         * border or background.
          */
-        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
+        distance?: number;
         /**
-         * (Highcharts, Highstock, Highmaps) Defines the color of the legend
-         * symbol for this series. Defaults to undefined, in which case the
-         * series color is used. Does not work with styled mode.
+         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the data
+         * labels.
          */
-        legendSymbolColor?: Highcharts.ColorType;
+        enabled?: boolean;
         /**
-         * (Highcharts, Highstock, Gantt) The id of another series to link to.
-         * Additionally, the value can be ":previous" to link to the previous
-         * series. When two series are linked, only the first one appears in the
-         * legend. Toggling the visibility of this also toggles the linked
-         * series.
-         *
-         * If master series uses data sorting and linked series does not have
-         * its own sorting definition, the linked series will be sorted in the
-         * same order as the master one.
-         *
-         * If a `compare` value is not set on a linked series, it will be
-         * inherited from the parent series.
+         * (Highcharts, Highstock, Highmaps, Gantt) A declarative filter to
+         * control of which data labels to display. The declarative filter is
+         * designed for use when callback functions are not available, like when
+         * the chart options require a pure JSON structure or for use with
+         * graphical editors. For programmatic control, use the `formatter`
+         * instead, and return `undefined` to disable a single data label. (see
+         * online documentation for example)
          */
-        linkedTo?: string;
+        filter?: Highcharts.DataLabelsFilterOptionsObject;
         /**
-         * (Highcharts, Highstock, Gantt) The maximum allowed pixel width for a
-         * column, translated to the height of a bar in a bar chart. This
-         * prevents the columns from becoming too wide when there is a small
-         * number of points in the chart.
+         * (Highcharts, Highstock, Highmaps, Gantt) A format string for the data
+         * label. Available variables are the same as for `formatter`.
          */
-        maxPointWidth?: number;
+        format?: string;
         /**
-         * (Highcharts, Highstock, Gantt) The minimal height for a column or
-         * width for a bar. By default, 0 values are not shown. To visualize a 0
-         * (or close to zero) point, set the minimal point length to a pixel
-         * value like 3\. In stacked column charts, minPointLength might not be
-         * respected for tightly packed values.
+         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
+         * to format the data label. Note that if a `format` is defined, the
+         * format takes precedence and the formatter is ignored.
          */
-        minPointLength?: number;
+        formatter?: Highcharts.DataLabelsFormatterCallbackFunction;
         /**
-         * (Highcharts) The color for the parts of the graph or points that are
-         * below the threshold. Note that `zones` takes precedence over the
-         * negative color. Using `negativeColor` is equivalent to applying a
-         * zone with value of 0.
+         * (Highcharts, Highstock, Highmaps, Gantt) For points with an extent,
+         * like columns or map areas, whether to align the data label inside the
+         * box or to the actual value point. Defaults to `false` in most cases,
+         * `true` in stacked columns.
          */
-        negativeColor?: Highcharts.ColorType;
+        inside?: boolean;
         /**
-         * (Highcharts, Highstock) Whether or not data-points with the value of
-         * `null` should be interactive. When this is set to `true`, tooltips
-         * may highlight these points, and this option also enables keyboard
-         * navigation for such points. Format options for such points include
-         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
-         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
+         * (Highcharts, Highstock, Highmaps, Gantt) The rank for this point's
+         * data label in case of collision. If two data labels are about to
+         * overlap, only the one with the highest `labelrank` will be drawn.
          */
-        nullInteraction?: (boolean|undefined);
+        labelrank?: number;
         /**
-         * (Highcharts) Options for the _Series on point_ feature. Only `pie`
-         * and `sunburst` series are supported at this moment.
+         * (Highcharts, Highstock, Highmaps, Gantt) Format for points with the
+         * value of null. Works analogously to format. `nullFormat` can be
+         * applied only to series which support displaying null points.
+         * `heatmap` and `tilemap` supports `nullFormat` by default while the
+         * following series requires [#series.nullInteraction] set to `true`:
+         * `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
+         * `timeline`. Does not work with series that don't display null points,
+         * like `pie`.
          */
-        onPoint?: (object|Highcharts.PlotBulletOnPointOptions);
+        nullFormat?: (boolean|string);
         /**
-         * (Highcharts) Opacity of a series parts: line, fill (e.g. area) and
-         * dataLabels.
+         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
+         * that defines formatting for points with the value of null. Works
+         * analogously to formatter. `nullFormatter` can be applied only to
+         * series which support displaying null points. `heatmap` and `tilemap`
+         * supports `nullFormatter` by default while the following series
+         * requires (series.nullInteraction)[#series.nullInteraction] set to
+         * `true`: `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
+         * `timeline`. Does not work with series that don't display null points,
+         * like `pie`.
          */
-        opacity?: number;
+        nullFormatter?: Highcharts.DataLabelsFormatterCallbackFunction;
         /**
-         * (Highcharts) Properties for each single point.
+         * (Highcharts, Highstock, Highmaps, Gantt) How to handle data labels
+         * that flow outside the plot area. The default is `"justify"`, which
+         * aligns them inside the plot area. For columns and bars, this means it
+         * will be moved inside the bar. To display data labels outside the plot
+         * area, set `crop` to `false` and `overflow` to `"allow"`.
          */
-        point?: Highcharts.PlotSeriesPointOptions;
+        overflow?: Highcharts.DataLabelsOverflowValue;
         /**
-         * (Highcharts) Deprecated. Use
-         * series.accessibility.point.descriptionFormat instead.
-         *
-         * Same as accessibility.point.descriptionFormat, but for an individual
-         * series. Overrides the chart wide configuration.
+         * (Highcharts, Highstock, Highmaps, Gantt) When either the
+         * `borderWidth` or the `backgroundColor` is set, this is the padding
+         * within the box.
          *
-         * @deprecated 12.6.0
+         * An array of numbers sets padding for the respective sides. An array
+         * of two numbers repeats the values for the horizontal and vertical
+         * sides.
          */
-        pointDescriptionFormat?: Function;
+        padding?: (number|Array<number>);
         /**
-         * (Highcharts) Deprecated. Use
-         * series.accessibility.point.descriptionFormatter instead.
-         *
-         * Same as accessibility.series.descriptionFormatter, but for an
-         * individual series. Overrides the chart wide configuration.
-         *
-         * @deprecated 8.0.0
+         * (Highcharts, Highstock, Highmaps, Gantt) Aligns data labels relative
+         * to points. If `center` alignment is not possible, it defaults to
+         * `right`.
          */
-        pointDescriptionFormatter?: Function;
+        position?: Highcharts.AlignValue;
         /**
-         * (Highcharts, Highstock, Gantt) If no x values are given for the
-         * points in a series, `pointInterval` defines the interval of the x
-         * values. For example, if a series contains one value every decade
-         * starting from year 0, set `pointInterval` to `10`. In true `datetime`
-         * axes, the `pointInterval` is set in milliseconds.
-         *
-         * It can be also be combined with `pointIntervalUnit` to draw irregular
-         * time intervals.
-         *
-         * If combined with `relativeXValue`, an x value can be set on each
-         * point, and the `pointInterval` is added x times to the `pointStart`
-         * setting.
-         *
-         * Please note that this options applies to the _series data_, not the
-         * interval of the axis ticks, which is independent.
+         * (Highcharts, Highstock, Highmaps, Gantt) Text rotation in degrees.
+         * Note that due to a more complex structure, backgrounds, borders and
+         * padding will be lost on a rotated data label.
          */
-        pointInterval?: number;
+        rotation?: number;
         /**
-         * (Highcharts, Highstock, Gantt) On datetime series, this allows for
-         * setting the pointInterval to irregular time units, `day`, `month` and
-         * `year`. A day is usually the same as 24 hours, but
-         * `pointIntervalUnit` also takes the DST crossover into consideration
-         * when dealing with local time. Combine this option with
-         * `pointInterval` to draw weeks, quarters, 6 months, 10 years etc.
-         *
-         * Please note that this options applies to the _series data_, not the
-         * interval of the axis ticks, which is independent.
+         * (Highcharts, Highstock, Highmaps, Gantt) The shadow of the box. Works
+         * best with `borderWidth` or `backgroundColor`. Since 2.3 the shadow
+         * can be an object configuration containing `color`, `offsetX`,
+         * `offsetY`, `opacity` and `width`.
          */
-        pointIntervalUnit?: Highcharts.OptionsPointIntervalUnitValue;
+        shadow?: (boolean|Highcharts.ShadowOptionsObject);
         /**
-         * (Highcharts, Highstock, Gantt) Padding between each column or bar, in
-         * x axis units.
+         * (Highcharts, Highstock, Highmaps, Gantt) The name of a symbol to use
+         * for the border around the label. Symbols are predefined functions on
+         * the Renderer object.
          */
-        pointPadding?: number;
-        /**
-         * (Highcharts, Highstock, Gantt) Possible values: `"on"`, `"between"`,
-         * `number`.
-         *
-         * In a column chart, when pointPlacement is `"on"`, the point will not
-         * create any padding of the X axis. In a polar column chart this means
-         * that the first column points directly north. If the pointPlacement is
-         * `"between"`, the columns will be laid out between ticks. This is
-         * useful for example for visualizing an amount between two points in
-         * time or in a certain sector of a polar chart.
-         *
-         * Since Highcharts 3.0.2, the point placement can also be numeric,
-         * where 0 is on the axis value, -0.5 is between this value and the
-         * previous, and 0.5 is between this value and the next. Unlike the
-         * textual options, numeric point placement options won't affect axis
-         * padding.
-         *
-         * Note that pointPlacement needs a pointRange to work. For column
-         * series this is computed, but for line-type series it needs to be set.
-         *
-         * For the `xrange` series type and gantt charts, if the Y axis is a
-         * category axis, the `pointPlacement` applies to the Y axis rather than
-         * the (typically datetime) X axis.
-         *
-         * Defaults to `undefined` in cartesian charts, `"between"` in polar
-         * charts.
-         */
-        pointPlacement?: (number|string);
+        shape?: string;
         /**
-         * (Highcharts, Highstock, Gantt) The X axis range that each point is
-         * valid for. This determines the width of the column. On a categorized
-         * axis, the range will be 1 by default (one category unit). On linear
-         * and datetime axes, the range will be computed as the distance between
-         * the two closest data points.
+         * (Highcharts, Highstock, Highmaps, Gantt) Styles for the label. The
+         * default `color` setting is `"contrast"`, which is a pseudo color that
+         * Highcharts picks up and applies the maximum contrast to the
+         * underlying point item, for example the bar in a bar chart.
          *
-         * The default `null` means it is computed automatically, but this
-         * option can be used to override the automatic value.
+         * The `textOutline` is a pseudo property that applies an outline of the
+         * given width with the given color, which by default is the maximum
+         * contrast to the text. So a bright text color will result in a black
+         * text outline for maximum readability on a mixed background. In some
+         * cases, especially with grayscale text, the text outline doesn't work
+         * well, in which cases it can be disabled by setting it to `"none"`.
+         * When `useHTML` is true, the `textOutline` will not be picked up. In
+         * this, case, the same effect can be achieved through the `text-shadow`
+         * CSS property. As a complementary or alternative to the `textOutline`,
+         * a `dataLabels.backgroundColor` can be used. It provides a more calm
+         * impression and ensures readable text label, at the cost of a risk of
+         * overshadowing the underlying chart elements.
          *
-         * This option is set by default to 1 if data sorting is enabled.
+         * For some series types, where each point has an extent, like for
+         * example tree maps, the data label may overflow the point. There are
+         * two strategies for handling overflow. By default, the text will wrap
+         * to multiple lines. The other strategy is to set `style.textOverflow`
+         * to `ellipsis`, which will keep the text on one line plus it will
+         * break inside long words.
          */
-        pointRange?: (number|null);
+        style?: Highcharts.CSSObject;
         /**
-         * (Highcharts, Highstock, Gantt) If no x values are given for the
-         * points in a series, `pointStart` defines on what value to start. For
-         * example, if a series contains one yearly value starting from 1945,
-         * set `pointStart` to 1945.
-         *
-         * The `pointStart` setting can be a number, or a datetime string that
-         * is parsed according to the `time.timezone` setting.
+         * (Highcharts, Highstock, Highmaps, Gantt) Options for a label text
+         * which should follow marker's shape. Border and background are
+         * disabled for a label that follows a path.
          *
-         * If combined with `relativeXValue`, an x value can be set on each
-         * point. The x value from the point options is multiplied by
-         * `pointInterval` and added to `pointStart` to produce a modified x
-         * value.
-         */
-        pointStart?: (number|string);
-        /**
-         * (Highcharts, Highstock, Gantt) A pixel value specifying a fixed width
-         * for each column or bar point. When set to `undefined`, the width is
-         * calculated from the `pointPadding` and `groupPadding`. The width
-         * effects the dimension that is not based on the point value. For
-         * column series it is the horizontal length and for bar series it is
-         * the vertical length.
-         */
-        pointWidth?: number;
-        /**
-         * (Highcharts, Highstock) When true, X values in the data set are
-         * relative to the current `pointStart`, `pointInterval` and
-         * `pointIntervalUnit` settings. This allows compression of the data for
-         * datasets with irregular X values.
-         *
-         * The real X values are computed on the formula `f(x) = ax + b`, where
-         * `a` is the `pointInterval` (optionally with a time unit given by
-         * `pointIntervalUnit`), and `b` is the `pointStart`.
-         */
-        relativeXValue?: boolean;
-        /**
-         * (Highcharts) Whether to select the series initially. If
-         * `showCheckbox` is true, the checkbox next to the series name in the
-         * legend will be checked for a selected series.
-         */
-        selected?: boolean;
-        /**
-         * (Highcharts) Whether to apply a drop shadow to the graph line. Since
-         * 2.3 the shadow can be an object configuration containing `color`,
-         * `offsetX`, `offsetY`, `opacity` and `width`.
+         * **Note:** Only SVG-based renderer supports this option. Setting
+         * `useHTML` to true will disable this option.
          *
-         * Note that in some cases, like stacked columns or other dense layouts,
-         * the series may cast shadows on each other. In that case, the
-         * `chart.seriesGroupShadow` allows applying a common drop shadow to the
-         * whole series group.
-         */
-        shadow?: (boolean|Highcharts.ShadowOptionsObject);
-        /**
-         * (Highcharts) If true, a checkbox is displayed next to the legend item
-         * to allow selecting the series. The state of the checkbox is
-         * determined by the `selected` option.
+         * Text path support is not bundled into `highcharts.js`, and requires
+         * the `modules/textpath.js` file. However, it is included in the script
+         * files of those series types that use it by default.
          */
-        showCheckbox?: boolean;
+        textPath?: Highcharts.DataLabelsTextPathOptionsObject;
         /**
-         * (Highcharts) Whether to display this particular series or series type
-         * in the legend. Standalone series are shown in legend by default, and
-         * linked series are not. Since v7.2.0 it is possible to show series
-         * that use colorAxis by setting this option to `true`.
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to use HTML to
+         * render the labels.
          */
-        showInLegend?: boolean;
+        useHTML?: boolean;
         /**
-         * (Highcharts) Deprecated. Use series.accessibility.keyboardNavigation
-         * instead.
-         *
-         * If set to `true`, the accessibility module will skip past the points
-         * in this series for keyboard navigation.
-         *
-         * @deprecated 8.0.0
+         * (Highcharts, Highstock, Highmaps, Gantt) The vertical alignment of a
+         * data label. Can be one of `top`, `middle` or `bottom`. The default
+         * value depends on the data, for instance in a column chart, the label
+         * is above positive values and below negative values.
          */
-        skipKeyboardNavigation?: boolean;
+        verticalAlign?: string;
         /**
-         * (Highcharts, Highstock) When this is true, the series will not cause
-         * the Y axis to cross the zero plane (or threshold option) unless the
-         * data actually crosses the plane.
-         *
-         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
-         * will make the Y axis show negative values according to the
-         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
-         * at 0.
+         * (Highcharts, Highstock, Highmaps, Gantt) The x position offset of the
+         * label relative to the point in pixels.
          */
-        softThreshold?: boolean;
+        x?: number;
         /**
-         * (Highcharts) Sonification/audio chart options for a series.
+         * (Highcharts, Highstock, Highmaps, Gantt) The y position offset of the
+         * label relative to the point in pixels.
          */
-        sonification?: Highcharts.SeriesSonificationOptions;
+        y?: number;
         /**
-         * (Highcharts, Highstock) Whether to stack the values of each series on
-         * top of each other. Possible values are null to disable, `"normal"` to
-         * stack by value or `"percent"`.
-         *
-         * When stacking is enabled, data must be sorted in ascending X order.
+         * (Highcharts, Highstock, Highmaps, Gantt) The z index of the data
+         * labels group. Does not apply below series level options.
          *
-         * Some stacking options are related to specific series types. In the
-         * streamgraph series type, the stacking option is set to `"stream"`.
-         * The second one is `"overlap"`, which only applies to waterfall
-         * series.
-         */
-        stacking?: Highcharts.OptionsStackingValue;
-        /**
-         * (Highcharts) A collection of options for different series states.
-         */
-        states?: Highcharts.SeriesStatesOptionsObject;
-        /**
-         * (Highcharts) Sticky tracking of mouse events. When true, the
-         * `mouseOut` event on a series isn't triggered until the mouse moves
-         * over another series, or out of the plot area. When false, the
-         * `mouseOut` event on a series is triggered when the mouse leaves the
-         * area around the series' graph or markers. This also implies the
-         * tooltip when not shared. When `stickyTracking` is false and
-         * `tooltip.shared` is false, the tooltip will be hidden when moving the
-         * mouse between series. Defaults to true for line and area type series,
-         * but to false for columns, pies etc.
-         *
-         * **Note:** The boost module will force this option because of
-         * technical limitations.
-         */
-        stickyTracking?: boolean;
-        /**
-         * (Highcharts) All options related with look and positioning of
-         * targets.
+         * Use a `zIndex` of 6 to display it above the series, or use a `zIndex`
+         * of 2 to display it behind the series.
          */
-        targetOptions?: Highcharts.PlotBulletTargetOptions;
+        zIndex?: number;
+    }
+    /**
+     * (Highcharts) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
+     */
+    interface PlotBulletOnPointConnectorOptions {
         /**
-         * (Highcharts) The Y axis value to serve as the base for the columns,
-         * for distinguishing between values above and below a threshold. If
-         * `null`, the columns extend from the padding Y axis minimum.
+         * (Highcharts) A name for the dash style to use for the connector.
          */
-        threshold?: (number|null);
+        dashstyle?: string;
         /**
-         * (Highcharts) A configuration object for the tooltip rendering of each
-         * single series. Properties are inherited from tooltip, but only the
-         * following properties can be defined on a series level.
+         * (Highcharts) Color of the connector line. By default it's the series'
+         * color.
          */
-        tooltip?: Highcharts.SeriesTooltipOptionsObject;
+        stroke?: string;
         /**
-         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
-         * that is longer than this, the Series class looks for data
-         * configurations of plain numbers or arrays of numbers. The first and
-         * last valid points are checked. If found, the rest of the data is
-         * assumed to be the same. This saves expensive data checking and
-         * indexing in long series, and makes data-heavy charts render faster.
-         *
-         * Set it to `0` disable.
-         *
-         * Note:
-         *
-         * - In boost mode turbo threshold is forced. Only array of numbers or
-         * two dimensional arrays are allowed.
-         *
-         * - In version 11.4.3 and earlier, if object configurations were passed
-         * beyond the turbo threshold, a warning was logged in the console and
-         * the data series didn't render.
+         * (Highcharts) Pixel width of the connector line.
          */
-        turboThreshold?: number;
+        width?: number;
+    }
+    /**
+     * (Highcharts) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
+     */
+    interface PlotBulletOnPointPositionOptions {
         /**
-         * (Highcharts) Set the initial visibility of the series.
+         * (Highcharts) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
          */
-        visible?: boolean;
+        offsetX?: number;
         /**
-         * (Highcharts, Highstock) Defines the Axis on which the zones are
-         * applied.
+         * (Highcharts) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
+         * position.
          */
-        zoneAxis?: string;
+        offsetY?: number;
         /**
-         * (Highcharts, Highstock) An array defining zones within a series.
-         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
-         * according to the `zoneAxis` option. The zone definitions have to be
-         * in ascending order regarding to the value.
-         *
-         * In styled mode, the color zones are styled with the
-         * `.highcharts-zone-{n}` class, or custom classed from the `className`
-         * option (view live demo).
+         * (Highcharts) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
          */
-        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
+        x?: number;
         /**
-         * (Highcharts) Whether to zoom non-cartesian series. If `chart.zooming`
-         * is set, the option allows to disable zooming on an individual
-         * non-cartesian series. By default zooming is enabled for all series.
-         *
-         * **Note**: This option works only for non-cartesian series.
+         * (Highcharts) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
          */
-        zoomEnabled?: boolean;
+        y?: number;
     }
     /**
-     * (Highcharts) Animation when not hovering over the marker.
+     * (Highcharts, Highstock) Animation setting for hovering the graph in
+     * line-type series.
      */
-    interface PlotBulletStatesInactiveAnimationOptions {
+    interface PlotBulletStatesHoverAnimationOptions {
+        /**
+         * (Highcharts, Highstock) The duration of the hover animation in
+         * milliseconds. By default the hover state animates quickly in, and
+         * slowly back to normal.
+         */
         duration?: number;
     }
     /**
-     * (Highcharts) All options related with look and positioning of targets.
+     * (Highcharts, Highstock) Animation setting for hovering the graph in
+     * line-type series.
      */
-    interface PlotBulletTargetOptions {
-        /**
-         * (Highcharts) The border color of the rectangle representing the
-         * target. When not set, the point's border color is used.
-         *
-         * In styled mode, use class `highcharts-bullet-target` instead.
-         */
-        borderColor?: Highcharts.ColorString;
-        /**
-         * (Highcharts) The border radius of the rectangle representing the
-         * target.
-         */
-        borderRadius?: number;
+    interface PlotBulletStatesSelectAnimationOptions {
         /**
-         * (Highcharts) The border width of the rectangle representing the
-         * target.
-         *
-         * In styled mode, use class `highcharts-bullet-target` instead.
-         */
-        borderWidth?: number;
-        /**
-         * (Highcharts) The color of the rectangle representing the target. When
-         * not set, point's color (if set in point's options - `color`) or zone
-         * of the target value (if `zones` or `negativeColor` are set) or the
-         * same color as the point has is used.
-         *
-         * In styled mode, use class `highcharts-bullet-target` instead.
-         */
-        color?: Highcharts.ColorType;
-        /**
-         * (Highcharts) The height of the rectangle representing the target.
-         */
-        height?: number;
-        /**
-         * (Highcharts) The width of the rectangle representing the target.
-         * Could be set as a pixel value or as a percentage of a column width.
+         * (Highcharts, Highstock) The duration of the hover animation in
+         * milliseconds. By default the hover state animates quickly in, and
+         * slowly back to normal.
          */
-        width?: (number|string);
+        duration?: number;
     }
     /**
-     * (Highcharts) Options for the tooltip header when tooltip.split is
-     * enabled. The header is the box containing the X value in a split tooltip.
+     * (Highcharts, Highstock, Gantt) For series on datetime axes, the date
+     * format in the tooltip's header will by default be guessed based on the
+     * closest data points. This member gives the default string representations
+     * used for each unit. For an overview of the string or object
+     * configuration, see dateFormat.
      */
-    interface PlotBulletTooltipHeaderOptions {
-        /**
-         * (Highcharts) Background color for the tooltip header when
-         * tooltip.split is enabled.
-         */
-        backgroundColor?: Highcharts.ColorType;
+    interface PlotBulletTooltipDateTimeLabelFormatsOptions {
+        day?: string;
+        hour?: string;
+        millisecond?: string;
+        minute?: string;
+        month?: string;
+        second?: string;
+        week?: string;
+        year?: string;
+    }
+    /**
+     * (Highcharts) Positioning options for fixed tooltip, taking effect only
+     * when tooltip.fixed is `true`.
+     */
+    interface PlotBulletTooltipPositionOptions {
         /**
-         * (Highcharts) Border color for the tooltip header when tooltip.split
-         * is enabled.
+         * (Highcharts) The horizontal alignment of the fixed tooltip.
          */
-        borderColor?: Highcharts.ColorType;
+        align?: Highcharts.AlignValue;
         /**
-         * (Highcharts) The width of the border for the tooltip header when
-         * tooltip.split is enabled.
+         * (Highcharts) What the fixed tooltip alignment should be relative to.
+         *
+         * The default, `pane`, means that it is aligned within the plot area
+         * for that given series. If the tooltip is split (as default in Stock
+         * charts), each partial tooltip is aligned within the series' pane.
          */
-        borderWidth?: number;
+        relativeTo?: Highcharts.OptionsRelativeToValue;
         /**
-         * (Highcharts) Distance between the plot area and the header (except
-         * the chevron) in a split tooltip, in pixels. The default value makes
-         * the header text align with the axis labels.
+         * (Highcharts) The vertical alignment of the fixed tooltip.
          */
-        distance?: number;
+        verticalAlign?: Highcharts.VerticalAlignValue;
         /**
-         * (Highcharts) The name of a symbol to use for the border around the
-         * tooltip header. Applies only when tooltip.split is enabled.
-         *
-         * Custom callbacks for symbol path generation can also be added to
-         * `Highcharts.SVGRenderer.prototype.symbols` the same way as for
-         * series.marker.symbol.
+         * (Highcharts) X pixel offset from the given position. Can be used to
+         * shy away from axis lines, grid lines etc to avoid the tooltip
+         * overlapping other elements.
          */
-        shape?: string;
+        x?: number;
         /**
-         * (Highcharts) CSS styles for the tooltip header. The default is `{
-         * fontSize: '1em' }`, ensuring that the header text is the same size as
-         * the axis labels.
+         * (Highcharts) Y pixel offset from the given position. Can be used to
+         * shy away from axis lines, grid lines etc to avoid the tooltip
+         * overlapping other elements.
          */
-        style?: object;
+        y?: number;
     }
     /**
      * (Highcharts, Highstock) Animation setting for hovering the graph in