highcharts 13.0.0 → 13.0.2

package/options/linearregression.d.ts

@@ -83,44 +83,301 @@ declare module "../highcharts" {
         valueSuffix?: string;
     }
     /**
-     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
-     * animation when a series is displayed for the `dataLabels`. The animation
-     * can also be set as a configuration object. Please note that this option
-     * only applies to the initial animation.
+     * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+     * labels, appearing next to each data point.
      *
-     * For other animations, see chart.animation and the animation parameter
-     * under the API methods. The following properties are supported:
+     * Since v6.2.0, multiple data labels can be applied to each single point by
+     * defining them as an array of configs.
      *
-     * - `defer`: The animation delay time in milliseconds.
+     * In styled mode, the data labels can be styled with the
+     * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+     * (see example).
      */
-    interface PlotLinearregressionDataLabelsAnimationOptions {
+    interface PlotLinearregressionDataLabelsOptions {
         /**
-         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
-         * milliseconds. Set to `0` to render the data labels immediately. As
-         * `undefined` inherits defer time from the series.animation.defer.
+         * (Highcharts, Highstock, Highmaps, Gantt) The alignment of the data
+         * label compared to the point. If `right`, the right side of the label
+         * should be touching the point. For points with an extent, like
+         * columns, the alignments also dictates how to align it inside the box,
+         * as given with the inside option. Can be one of `left`, `center` or
+         * `right`.
          */
-        defer?: number;
-    }
-    /**
-     * (Highcharts, Highstock) Options for series data sorting.
-     */
-    interface PlotLinearregressionDataSortingOptions {
+        align?: (Highcharts.AlignValue|null);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Alignment method for data
+         * labels. If set to `plotEdges`, the labels are aligned within the plot
+         * area in the direction of the y-axis. So in a regular column chart,
+         * the labels are aligned vertically according to the `verticalAlign`
+         * setting. In a bar chart, which is inverted, the labels are aligned
+         * horizontally according to the `align` setting. Applies to cartesian
+         * series only.
+         */
+        alignTo?: string;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to allow data labels
+         * to overlap. To make the labels less sensitive for overlapping, the
+         * dataLabels.padding can be set to 0.
+         */
+        allowOverlap?: boolean;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the
+         * initial animation when a series is displayed for the `dataLabels`.
+         * The animation can also be set as a configuration object. Please note
+         * that this option only applies to the initial animation.
+         *
+         * For other animations, see chart.animation and the animation parameter
+         * under the API methods. The following properties are supported:
+         *
+         * - `defer`: The animation delay time in milliseconds.
+         */
+        animation?: (boolean|Highcharts.PlotLinearregressionDataLabelsAnimationOptions|Partial<Highcharts.AnimationOptionsObject>);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The background color or
+         * gradient for the data label. In addition to regular colors, there are
+         * two special setting for this option:
+         *
+         * - `auto` will set the background color the point's color.
+         *
+         * - `contrast` will set it to a contrast against the text color, with
+         * an opacity allowing to see the underlying content. The contrast is
+         * great enough to ensure readability for the text according to
+         * accessibility standards.
+         */
+        backgroundColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The border color for the
+         * data label. Setting it to `auto` will use the point's color. Defaults
+         * to `undefined`.
+         */
+        borderColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The border radius in pixels
+         * for the data label.
+         */
+        borderRadius?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The border width in pixels
+         * for the data label.
+         */
+        borderWidth?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) A class name for the data
+         * label. Particularly in styled mode, this can be used to give each
+         * series' or point's data label unique styling. In addition to this
+         * option, a default color class name is added so that we can give the
+         * labels a contrast text shadow.
+         */
+        className?: string;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This options is deprecated.
+         * Use style.color instead.
+         *
+         * The text color for the data labels. Defaults to `undefined`. For
+         * certain series types, like column or map, the data labels can be
+         * drawn inside the points. In this case the data label will be drawn
+         * with maximum contrast by default. Additionally, it will be given a
+         * `text-outline` style with the opposite color, to further increase the
+         * contrast. This can be overridden by setting the `text-outline` style
+         * to `none` in the `dataLabels.style` option.
+         *
+         * @deprecated 10.3.0
+         */
+        color?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to hide data labels
+         * that are outside the plot area. By default, the data label is moved
+         * inside the plot area according to the overflow option.
+         */
+        crop?: boolean;
+        /**
+         * (Highcharts, Highstock, Gantt) Whether to defer displaying the data
+         * labels until the initial series animation has finished. Setting to
+         * `false` renders the data label immediately. If set to `true` inherits
+         * the defer time set in plotOptions.series.animation.
+         */
+        defer?: boolean;
+        /**
+         * (Highcharts, Highstock, Gantt) The distance of the data label from
+         * the data point. Note that the `padding` setting also affects the
+         * rendered distance, but is not visible unless the data label has a
+         * border or background.
+         */
+        distance?: number;
         /**
-         * (Highcharts, Highstock) Enable or disable data sorting for the
-         * series. Use xAxis.reversed to change the sorting order.
+         * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the data
+         * labels.
          */
         enabled?: boolean;
         /**
-         * (Highcharts, Highstock) Whether to allow matching points by name in
-         * an update. If this option is disabled, points will be matched by
-         * order.
+         * (Highcharts, Highstock, Highmaps, Gantt) A declarative filter to
+         * control of which data labels to display. The declarative filter is
+         * designed for use when callback functions are not available, like when
+         * the chart options require a pure JSON structure or for use with
+         * graphical editors. For programmatic control, use the `formatter`
+         * instead, and return `undefined` to disable a single data label. (see
+         * online documentation for example)
+         */
+        filter?: Highcharts.DataLabelsFilterOptionsObject;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) A format string for the data
+         * label. Available variables are the same as for `formatter`.
+         */
+        format?: string;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
+         * to format the data label. Note that if a `format` is defined, the
+         * format takes precedence and the formatter is ignored.
+         */
+        formatter?: Highcharts.DataLabelsFormatterCallbackFunction;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) For points with an extent,
+         * like columns or map areas, whether to align the data label inside the
+         * box or to the actual value point. Defaults to `false` in most cases,
+         * `true` in stacked columns.
+         */
+        inside?: boolean;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The rank for this point's
+         * data label in case of collision. If two data labels are about to
+         * overlap, only the one with the highest `labelrank` will be drawn.
+         */
+        labelrank?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Format for points with the
+         * value of null. Works analogously to format. `nullFormat` can be
+         * applied only to series which support displaying null points.
+         * `heatmap` and `tilemap` supports `nullFormat` by default while the
+         * following series requires [#series.nullInteraction] set to `true`:
+         * `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
+         * `timeline`. Does not work with series that don't display null points,
+         * like `pie`.
+         */
+        nullFormat?: (boolean|string);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Callback JavaScript function
+         * that defines formatting for points with the value of null. Works
+         * analogously to formatter. `nullFormatter` can be applied only to
+         * series which support displaying null points. `heatmap` and `tilemap`
+         * supports `nullFormatter` by default while the following series
+         * requires (series.nullInteraction)[#series.nullInteraction] set to
+         * `true`: `line`, `spline`, `area`, `area-spline`, `column`, `bar`, and
+         * `timeline`. Does not work with series that don't display null points,
+         * like `pie`.
+         */
+        nullFormatter?: Highcharts.DataLabelsFormatterCallbackFunction;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) How to handle data labels
+         * that flow outside the plot area. The default is `"justify"`, which
+         * aligns them inside the plot area. For columns and bars, this means it
+         * will be moved inside the bar. To display data labels outside the plot
+         * area, set `crop` to `false` and `overflow` to `"allow"`.
+         */
+        overflow?: Highcharts.DataLabelsOverflowValue;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) When either the
+         * `borderWidth` or the `backgroundColor` is set, this is the padding
+         * within the box.
+         *
+         * An array of numbers sets padding for the respective sides. An array
+         * of two numbers repeats the values for the horizontal and vertical
+         * sides.
+         */
+        padding?: (number|Array<number>);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Aligns data labels relative
+         * to points. If `center` alignment is not possible, it defaults to
+         * `right`.
+         */
+        position?: Highcharts.AlignValue;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Text rotation in degrees.
+         * Note that due to a more complex structure, backgrounds, borders and
+         * padding will be lost on a rotated data label.
+         */
+        rotation?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The shadow of the box. Works
+         * best with `borderWidth` or `backgroundColor`. Since 2.3 the shadow
+         * can be an object configuration containing `color`, `offsetX`,
+         * `offsetY`, `opacity` and `width`.
+         */
+        shadow?: (boolean|Highcharts.ShadowOptionsObject);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The name of a symbol to use
+         * for the border around the label. Symbols are predefined functions on
+         * the Renderer object.
+         */
+        shape?: string;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Styles for the label. The
+         * default `color` setting is `"contrast"`, which is a pseudo color that
+         * Highcharts picks up and applies the maximum contrast to the
+         * underlying point item, for example the bar in a bar chart.
+         *
+         * The `textOutline` is a pseudo property that applies an outline of the
+         * given width with the given color, which by default is the maximum
+         * contrast to the text. So a bright text color will result in a black
+         * text outline for maximum readability on a mixed background. In some
+         * cases, especially with grayscale text, the text outline doesn't work
+         * well, in which cases it can be disabled by setting it to `"none"`.
+         * When `useHTML` is true, the `textOutline` will not be picked up. In
+         * this, case, the same effect can be achieved through the `text-shadow`
+         * CSS property. As a complementary or alternative to the `textOutline`,
+         * a `dataLabels.backgroundColor` can be used. It provides a more calm
+         * impression and ensures readable text label, at the cost of a risk of
+         * overshadowing the underlying chart elements.
+         *
+         * For some series types, where each point has an extent, like for
+         * example tree maps, the data label may overflow the point. There are
+         * two strategies for handling overflow. By default, the text will wrap
+         * to multiple lines. The other strategy is to set `style.textOverflow`
+         * to `ellipsis`, which will keep the text on one line plus it will
+         * break inside long words.
+         */
+        style?: Highcharts.CSSObject;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Options for a label text
+         * which should follow marker's shape. Border and background are
+         * disabled for a label that follows a path.
+         *
+         * **Note:** Only SVG-based renderer supports this option. Setting
+         * `useHTML` to true will disable this option.
+         *
+         * Text path support is not bundled into `highcharts.js`, and requires
+         * the `modules/textpath.js` file. However, it is included in the script
+         * files of those series types that use it by default.
+         */
+        textPath?: Highcharts.DataLabelsTextPathOptionsObject;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Whether to use HTML to
+         * render the labels.
+         */
+        useHTML?: boolean;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The vertical alignment of a
+         * data label. Can be one of `top`, `middle` or `bottom`. The default
+         * value depends on the data, for instance in a column chart, the label
+         * is above positive values and below negative values.
+         */
+        verticalAlign?: (Highcharts.VerticalAlignValue|null);
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The x position offset of the
+         * label relative to the point in pixels.
+         */
+        x?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The y position offset of the
+         * label relative to the point in pixels.
          */
-        matchByName?: boolean;
+        y?: number;
         /**
-         * (Highcharts, Highstock) Determines what data value should be used to
-         * sort by.
+         * (Highcharts, Highstock, Highmaps, Gantt) The z index of the data
+         * labels group. Does not apply below series level options.
+         *
+         * Use a `zIndex` of 6 to display it above the series, or use a `zIndex`
+         * of 2 to display it behind the series.
          */
-        sortKey?: string;
+        zIndex?: number;
     }
     /**
      * (Highcharts, Highstock, Gantt) Styles for the series label. The color
@@ -131,94 +388,712 @@ declare module "../highcharts" {
         fontWeight?: string;
     }
     /**
-     * (Highstock) Options for the connector in the _Series on point_ feature.
-     *
-     * In styled mode, the connector can be styled with the
-     * `.highcharts-connector-seriesonpoint` class name.
+     * (Highstock) Animation when hovering over the marker.
      */
-    interface PlotLinearregressionOnPointConnectorOptions {
+    interface PlotLinearregressionMarkerStatesSelectAnimationOptions {
+        duration?: number;
+    }
+    /**
+     * (Highstock) Options for the _Series on point_ feature. Only `pie` and
+     * `sunburst` series are supported at this moment.
+     */
+    interface PlotLinearregressionOnPointOptions {
         /**
-         * (Highstock) A name for the dash style to use for the connector.
+         * (Highstock) Options for the connector in the _Series on point_
+         * feature.
+         *
+         * In styled mode, the connector can be styled with the
+         * `.highcharts-connector-seriesonpoint` class name.
          */
-        dashstyle?: string;
+        connectorOptions?: (Highcharts.PlotLinearregressionOnPointConnectorOptions|Highcharts.SVGAttributes);
         /**
-         * (Highstock) Color of the connector line. By default it's the series'
-         * color.
+         * (Highstock) The `id` of the point that we connect the series to. Only
+         * points with a given `plotX` and `plotY` values and map points are
+         * valid.
          */
-        stroke?: string;
+        id?: string;
         /**
-         * (Highstock) Pixel width of the connector line.
+         * (Highstock) Options allowing to set a position and an offset of the
+         * series in the _Series on point_ feature.
          */
-        width?: number;
+        position?: (object|Highcharts.PlotLinearregressionOnPointPositionOptions);
     }
     /**
-     * (Highstock) Options allowing to set a position and an offset of the
-     * series in the _Series on point_ feature.
+     * (Highstock) Linear regression indicator. This series requires `linkedTo`
+     * option to be set.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `linearregression` series are defined in
+     * plotOptions.linearregression.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - type option should always be set, otherwise a broad set of unsupported
+     * options is allowed.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
      */
-    interface PlotLinearregressionOnPointPositionOptions {
+    interface PlotLinearregressionOptions {
+        /**
+         * (Highstock) Accessibility options for a series.
+         */
+        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
+        /**
+         * (Highstock) Allow this series' points to be selected by clicking on
+         * the graphic (columns, point markers, pie slices, map areas etc).
+         *
+         * The selected points can be handled by point select and unselect
+         * events, or collectively by the getSelectedPoints function.
+         *
+         * And alternative way of selecting points is through dragging.
+         */
+        allowPointSelect?: boolean;
+        /**
+         * (Highstock) Enable or disable the initial animation when a series is
+         * displayed. The animation can also be set as a configuration object.
+         * Please note that this option only applies to the initial animation of
+         * the series itself. For other animations, see chart.animation and the
+         * animation parameter under the API methods. The following properties
+         * are supported:
+         *
+         * - `defer`: The animation delay time in milliseconds.
+         *
+         * - `duration`: The duration of the animation in milliseconds.
+         * (Defaults to `1000`)
+         *
+         * - `easing`: Can be a string reference to an easing function set on
+         * the `Math` object or a function. See the _Custom easing function_
+         * demo below. (Defaults to `easeInOutSine`)
+         *
+         * Due to poor performance, animation is disabled in old IE browsers for
+         * several chart types.
+         */
+        animation?: (boolean|Highcharts.AnimationOptionsObject);
+        /**
+         * (Highstock) For some series, there is a limit that shuts down
+         * animation by default when the total number of points in the chart is
+         * too high. For example, for a column chart and its derivatives,
+         * animation does not run if there is more than 250 points totally. To
+         * disable this cap, set `animationLimit` to `Infinity`. This option
+         * works if animation is fired on individual points, not on a group of
+         * points like e.g. during the initial animation.
+         */
+        animationLimit?: number;
+        /**
+         * (Highstock) Sets the color blending in the boost module.
+         */
+        boostBlending?: Highcharts.OptionsBoostBlendingValue;
+        /**
+         * (Highstock) Set the point threshold for when a series should enter
+         * boost mode.
+         *
+         * Setting it to e.g. 2000 will cause the series to enter boost mode
+         * when there are 2000 or more points in the series.
+         *
+         * To disable boosting on the series, set the `boostThreshold` to 0.
+         * Setting it to 1 will force boosting.
+         *
+         * Note that the cropThreshold also affects this setting. When zooming
+         * in on a series that has fewer points than the `cropThreshold`, all
+         * points are rendered although outside the visible plot area, and the
+         * `boostThreshold` won't take effect.
+         */
+        boostThreshold?: number;
+        /**
+         * (Highstock) An additional class name to apply to the series'
+         * graphical elements. This option does not replace default class names
+         * of the graphical element. Changes to the series' color will also be
+         * reflected in a chart's legend and tooltip.
+         */
+        className?: string;
+        /**
+         * (Highstock) Disable this option to allow series rendering in the
+         * whole plotting area.
+         *
+         * **Note:** Clipping should be always enabled when chart.zoomType is
+         * set
+         */
+        clip?: boolean;
+        /**
+         * (Highstock) The main color of the series. In line type series it
+         * applies to the line and the point markers unless otherwise specified.
+         * In bar type series it applies to the bars unless a color is specified
+         * per point. The default value is pulled from the `options.colors`
+         * array.
+         *
+         * In styled mode, the color can be defined by the colorIndex option.
+         * Also, the series color can be set with the `.highcharts-series`,
+         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
+         * `.highcharts-series-{n}` class, or individual classes given by the
+         * `className` option.
+         */
+        color?: Highcharts.ColorType;
+        /**
+         * (Highstock) Styled mode only. A specific color index to use for the
+         * series, so its graphic representations are given the class name
+         * `highcharts-color-{n}`.
+         *
+         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
+         * changing the color scheme very convenient.
+         */
+        colorIndex?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps) Determines what data value should
+         * be used to calculate point color if `colorAxis` is used. Requires to
+         * set `min` and `max` if some custom point property is used or if
+         * approximation for data grouping is set to `'sum'`.
+         */
+        colorKey?: string;
+        /**
+         * (Highstock) Compare the values of the series against the first
+         * non-null, non- zero value in the visible range. The y axis will show
+         * percentage or absolute change depending on whether `compare` is set
+         * to `"percent"` or `"value"`. When this is applied to multiple series,
+         * it allows comparing the development of the series against each other.
+         * Adds a `change` field to every point object. If a `compare` value is
+         * not set on a linked series, it will be inherited from the parent
+         * series.
+         */
+        compare?: Highcharts.OptionsCompareValue;
+        /**
+         * (Highstock) When compare is `percent`, this option dictates whether
+         * to use 0 or 100 as the base of comparison.
+         */
+        compareBase?: (0|100);
+        /**
+         * (Highstock) Defines if comparison should start from the first point
+         * within the visible range or should start from the last point
+         * **before** the range.
+         *
+         * In other words, this flag determines if first point within the
+         * visible range will have 0% (`compareStart=true`) or should have been
+         * already calculated according to the previous point
+         * (`compareStart=false`).
+         */
+        compareStart?: boolean;
+        /**
+         * (Highstock) Whether to compare indicator to the main series values or
+         * indicator values.
+         */
+        compareToMain?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to connect a graph line across null
+         * points, or render a gap between the two points on either side of the
+         * null.
+         *
+         * In stacked area chart, if `connectNulls` is set to true, null points
+         * are interpreted as 0.
+         */
+        connectNulls?: boolean;
+        /**
+         * (Highcharts, Highstock, Gantt) When true, each point or column edge
+         * is rounded to its nearest pixel in order to render sharp on screen.
+         * In some cases, when there are a lot of densely packed columns, this
+         * leads to visible difference in column widths or distance between
+         * columns. In these cases, setting `crisp` to `false` may look better,
+         * even though each column is rendered blurry.
+         */
+        crisp?: boolean;
+        /**
+         * (Highcharts, Highstock) When the series contains less points than the
+         * crop threshold, all points are drawn, even if the points fall outside
+         * the visible plot area at the current zoom. The advantage of drawing
+         * all points (including markers and columns), is that animation is
+         * performed on updates. On the other hand, when the series contains
+         * more points than the crop threshold, the series data is cropped to
+         * only contain points that fall within the plot area. The advantage of
+         * cropping away invisible points is to increase performance on large
+         * series.
+         */
+        cropThreshold?: number;
+        /**
+         * (Highstock) Cumulative Sum feature replaces points' values with the
+         * following formula: `sum of all previous points' values + current
+         * point's value`. Works only for points in a visible range. Adds the
+         * `cumulativeSum` field to each point object that can be accessed e.g.
+         * in the tooltip.pointFormat.
+         *
+         * With `dataGrouping` enabled, default grouping approximation is set to
+         * `sum`.
+         */
+        cumulative?: boolean;
+        /**
+         * (Highstock) Defines if cumulation should start from the first point
+         * within the visible range or should start from the last point
+         * **before** the range.
+         *
+         * In other words, this flag determines if first point within the
+         * visible range will start at 0 (`cumulativeStart=true`) or should have
+         * been already calculated according to the previous point
+         * (`cumulativeStart=false`).
+         */
+        cumulativeStart?: boolean;
+        /**
+         * (Highstock) You can set the cursor to "pointer" if you have click
+         * events attached to the series, to signal to the user that the points
+         * and lines can be clicked.
+         *
+         * In styled mode, the series cursor can be set with the same classes as
+         * listed under series.color.
+         */
+        cursor?: (string|Highcharts.CursorValue);
+        /**
+         * (Highstock) A reserved subspace to store options and values for
+         * customized functionality. Here you can add additional data for your
+         * own event callbacks and formatter callbacks.
+         */
+        custom?: Highcharts.Dictionary<any>;
+        /**
+         * (Highstock) Name of the dash style to use for the graph, or for some
+         * series types the outline of each shape.
+         *
+         * In styled mode, the stroke dash-array can be set with the same
+         * classes as listed under series.color.
+         */
+        dashStyle?: Highcharts.DashStyleValue;
+        /**
+         * (Highstock) Data grouping is the concept of sampling the data values
+         * into larger blocks in order to ease readability and increase
+         * performance of the JavaScript charts. Highcharts Stock by default
+         * applies data grouping when the points become closer than a certain
+         * pixel value, determined by the `groupPixelWidth` option.
+         *
+         * If data grouping is applied, the grouping information of grouped
+         * points can be read from the Point.dataGroup. If point options other
+         * than the data itself are set, for example `name` or `color` or custom
+         * properties, the grouping logic doesn't know how to group it. In this
+         * case the options of the first point instance are copied over to the
+         * group point. This can be altered through a custom `approximation`
+         * callback function.
+         */
+        dataGrouping?: Highcharts.DataGroupingOptionsObject;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+         * labels, appearing next to each data point.
+         *
+         * Since v6.2.0, multiple data labels can be applied to each single
+         * point by defining them as an array of configs.
+         *
+         * In styled mode, the data labels can be styled with the
+         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+         * (see example).
+         */
+        dataLabels?: (Highcharts.PlotLinearregressionDataLabelsOptions|Array<Highcharts.PlotLinearregressionDataLabelsOptions>);
+        /**
+         * (Highstock) The mapping between the data table and the series data
+         * points. This is used in conjunction with the `dataTable` option (on
+         * chart or series level) to map columns from the data table to the
+         * properties of the data points. The keys of the `dataMapping` object
+         * correspond to the properties of the data points (e.g. `x`, `y`,
+         * `name`), and the values are objects that specify which column from
+         * which data table to use for that property.
+         *
+         * The keys can also be nested paths, for example `dataLabel.format`, to
+         * map to nested properties of the data points.
+         *
+         * The values can also be strings, in which case they are interpreted as
+         * column id's from the first data table.
+         *
+         * A typical use case is that multiple series share a common column,
+         * like `name` or `x`. In this case, to avoid repetition, the common
+         * column can be applied in `plotOptions.series.dataMapping` and the
+         * individual series can specify only the columns that are unique to
+         * them.
+         *
+         * The series name defaults to the column ID of the main data column in
+         * the mapping. The main data column is typically the `y` data for
+         * cartesian series, or `value` for map series. For example, if the
+         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
+         * online documentation for example)
+         *
+         * If the columns of the DataTable have keys matching the series keys,
+         * the data mapping is not necessary. For example, this DataTable will
+         * connect directly to the series' `x` and `y` keys: (see online
+         * documentation for example)
+         */
+        dataMapping?: Highcharts.DataMappingOptionsObject;
+        /**
+         * (Highcharts, Highstock) Options for series data sorting.
+         */
+        dataSorting?: Highcharts.PlotLinearregressionDataSortingOptions;
+        /**
+         * (Highstock) Options for a specific series-level data table or an
+         * array of data tables. The `dataTable` option can be either a
+         * configuration object or an instance of the `DataTable` class. If a
+         * `DataTable` instance is passed, it will be used directly. If a
+         * configuration object or an array is passed, a new `DataTable`
+         * instance will be created based on the provided configuration.
+         */
+        dataTable?: (Highcharts.DataTable|Highcharts.DataTableOptionsObject|Array<(Highcharts.DataTable|Highcharts.DataTableOptionsObject)>);
+        /**
+         * (Highstock) Deprecated. Use
+         * plotOptions.series.accessibility.description instead.
+         *
+         * A description of the series to add to the screen reader information
+         * about the series.
+         *
+         * @deprecated 8.0.0
+         */
+        description?: string;
         /**
-         * (Highstock) Series center offset from the original x position. If
-         * defined, the connector line is drawn connecting original position
-         * with new position.
+         * (Highstock) Enable or disable the mouse tracking for a specific
+         * series. This includes point tooltips and click events on graphs and
+         * points. For large datasets it improves performance.
+         */
+        enableMouseTracking?: boolean;
+        /**
+         * (Highstock) General event handlers for the series items. These event
+         * hooks can also be attached to the series at run time using the
+         * `Highcharts.addEvent` function.
+         */
+        events?: Highcharts.SeriesEventsOptionsObject;
+        /**
+         * (Highstock) Determines whether the series should look for the nearest
+         * point in both dimensions or just the x-dimension when hovering the
+         * series. Defaults to `'xy'` for scatter series and `'x'` for most
+         * other series. If the data has duplicate x-values, it is recommended
+         * to set this to `'xy'` to allow hovering over all points.
+         *
+         * Applies only to series types using nearest neighbor search (not
+         * direct hover) for tooltip.
+         */
+        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
+        /**
+         * (Highcharts, Highstock) Defines when to display a gap in the graph,
+         * together with the gapUnit option.
+         *
+         * In case when `dataGrouping` is enabled, points can be grouped into a
+         * larger time span. This can make the grouped points to have a greater
+         * distance than the absolute value of `gapSize` property, which will
+         * result in disappearing graph completely. To prevent this situation
+         * the mentioned distance between grouped points is used instead of
+         * previously defined `gapSize`.
+         *
+         * In practice, this option is most often used to visualize gaps in time
+         * series. In a stock chart, intraday data is available for daytime
+         * hours, while gaps will appear in nights and weekends.
          */
-        offsetX?: number;
+        gapSize?: number;
         /**
-         * (Highstock) Series center offset from the original y position. If
-         * defined, the connector line is drawn from original position to a new
+         * (Highcharts, Highstock) Together with gapSize, this option defines
+         * where to draw gaps in the graph.
+         *
+         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
+         * that if the distance between two points is greater than 5 times that
+         * of the two closest points, the graph will be broken.
+         *
+         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
+         * values, which on a datetime axis is milliseconds. This also applies
+         * to the navigator series that inherits gap options from the base
+         * series.
+         */
+        gapUnit?: Highcharts.OptionsGapUnitValue;
+        /**
+         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
+         * total chart width or only the zoomed area when zooming in on parts of
+         * the X axis. By default, the Y axis adjusts to the min and max of the
+         * visible data. Cartesian series only.
+         */
+        getExtremesFromAll?: boolean;
+        /**
+         * (Highstock) Highlight only the hovered point and fade the remaining
+         * points.
+         *
+         * Scatter-type series require enabling the 'inactive' marker state and
+         * adjusting opacity. Note that this approach could affect performance
+         * with large datasets.
+         */
+        inactiveOtherPoints?: boolean;
+        /**
+         * (Highstock) When set to `false` will prevent the series data from
+         * being included in any form of data export.
+         *
+         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
+         * as `includeInCSVExport`.
+         */
+        includeInDataExport?: boolean;
+        /**
+         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
+         * the series as possible in a natural way, seeking to avoid other
+         * series. The goal of this feature is to make the chart more easily
+         * readable, like if a human designer placed the labels in the optimal
          * position.
+         *
+         * The series labels currently work with series types having a `graph`
+         * or an `area`.
          */
-        offsetY?: number;
+        label?: Highcharts.SeriesLabelOptionsObject;
         /**
-         * (Highstock) X position of the series center. By default, the series
-         * is displayed on the point that it is connected to.
+         * (Highstock) The line marks the last price from all points.
          */
-        x?: number;
+        lastPrice?: Highcharts.SeriesLastPriceOptionsObject;
         /**
-         * (Highstock) Y position of the series center. By default, the series
-         * is displayed on the point that it is connected to.
+         * (Highstock) The line marks the last price from visible range of
+         * points.
          */
-        y?: number;
-    }
-    /**
-     * (Highstock) Parameters used in calculation of regression series' points.
-     */
-    interface PlotLinearregressionParamsOptions {
+        lastVisiblePrice?: Highcharts.SeriesLastVisiblePriceOptionsObject;
         /**
-         * (Highstock) The point index which indicator calculations will base.
-         * For example using OHLC data, index=2 means the indicator will be
-         * calculated using Low values.
+         * (Highstock) What type of legend symbol to render for this series. Can
+         * be one of `areaMarker`, `lineMarker` or `rectangle`.
          */
-        index?: number;
+        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
         /**
-         * (Highstock) The base period for indicator calculations. This is the
-         * number of data points which are taken into account for the indicator
-         * calculations.
+         * (Highcharts, Highstock, Highmaps) Defines the color of the legend
+         * symbol for this series. Defaults to undefined, in which case the
+         * series color is used. Does not work with styled mode.
          */
-        period?: number;
+        legendSymbolColor?: Highcharts.ColorType;
         /**
-         * (Highstock) Unit (in milliseconds) for the x axis distances used to
-         * compute the regression line parameters (slope & intercept) for every
-         * range. In Highcharts Stock the x axis values are always represented
-         * in milliseconds which may cause that distances between points are
-         * "big" integer numbers.
+         * (Highstock) The line cap used for line ends and line joins on the
+         * graph.
+         */
+        linecap?: Highcharts.SeriesLinecapValue;
+        /**
+         * (Highcharts, Highstock) Pixel width of the graph line.
+         */
+        lineWidth?: number;
+        /**
+         * (Highcharts, Highstock, Gantt) The main series ID that indicator will
+         * be based on. Required for this indicator.
+         */
+        linkedTo?: string;
+        /**
+         * (Highstock) Options for the point markers of line and scatter-like
+         * series. Properties like `fillColor`, `lineColor` and `lineWidth`
+         * define the visual appearance of the markers. The `symbol` option
+         * defines the shape. Other series types, like column series, don't have
+         * markers, but have visual options on the series level instead.
+         *
+         * In styled mode, the markers can be styled with the
+         * `.highcharts-point`, `.highcharts-point-hover` and
+         * `.highcharts-point-select` class names.
+         */
+        marker?: Highcharts.PointMarkerOptionsObject;
+        /**
+         * (Highstock) The name of the series as shown in the legend, tooltip
+         * etc. If not set, it will be based on a technical indicator type and
+         * default params.
+         */
+        name?: string;
+        /**
+         * (Highstock) The color for the parts of the graph or points that are
+         * below the threshold. Note that `zones` takes precedence over the
+         * negative color. Using `negativeColor` is equivalent to applying a
+         * zone with value of 0.
+         */
+        negativeColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock) Whether or not data-points with the value of
+         * `null` should be interactive. When this is set to `true`, tooltips
+         * may highlight these points, and this option also enables keyboard
+         * navigation for such points. Format options for such points include
+         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
+         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
+         */
+        nullInteraction?: (boolean|undefined);
+        /**
+         * (Highstock) Options for the _Series on point_ feature. Only `pie` and
+         * `sunburst` series are supported at this moment.
+         */
+        onPoint?: (object|Highcharts.PlotLinearregressionOnPointOptions);
+        /**
+         * (Highstock) Opacity of a series parts: line, fill (e.g. area) and
+         * dataLabels.
+         */
+        opacity?: number;
+        /**
+         * (Highstock) Parameters used in calculation of regression series'
+         * points.
+         */
+        params?: Highcharts.PlotLinearregressionParamsOptions;
+        /**
+         * (Highstock) Properties for each single point.
+         */
+        point?: Highcharts.PlotSeriesPointOptions;
+        /**
+         * (Highstock) Deprecated. Use
+         * series.accessibility.point.descriptionFormat instead.
+         *
+         * Same as accessibility.point.descriptionFormat, but for an individual
+         * series. Overrides the chart wide configuration.
+         *
+         * @deprecated 12.6.0
+         */
+        pointDescriptionFormat?: Function;
+        /**
+         * (Highstock) Deprecated. Use
+         * series.accessibility.point.descriptionFormatter instead.
+         *
+         * Same as accessibility.series.descriptionFormatter, but for an
+         * individual series. Overrides the chart wide configuration.
+         *
+         * @deprecated 8.0.0
+         */
+        pointDescriptionFormatter?: Function;
+        /**
+         * (Highcharts, Highstock) When true, X values in the data set are
+         * relative to the current `pointStart`, `pointInterval` and
+         * `pointIntervalUnit` settings. This allows compression of the data for
+         * datasets with irregular X values.
+         *
+         * The real X values are computed on the formula `f(x) = ax + b`, where
+         * `a` is the `pointInterval` (optionally with a time unit given by
+         * `pointIntervalUnit`), and `b` is the `pointStart`.
+         */
+        relativeXValue?: boolean;
+        /**
+         * (Highstock) Whether to select the series initially. If `showCheckbox`
+         * is true, the checkbox next to the series name in the legend will be
+         * checked for a selected series.
+         */
+        selected?: boolean;
+        /**
+         * (Highstock) Whether to apply a drop shadow to the graph line. Since
+         * 2.3 the shadow can be an object configuration containing `color`,
+         * `offsetX`, `offsetY`, `opacity` and `width`.
+         *
+         * Note that in some cases, like stacked columns or other dense layouts,
+         * the series may cast shadows on each other. In that case, the
+         * `chart.seriesGroupShadow` allows applying a common drop shadow to the
+         * whole series group.
+         */
+        shadow?: (boolean|Highcharts.ShadowOptionsObject);
+        /**
+         * (Highstock) If true, a checkbox is displayed next to the legend item
+         * to allow selecting the series. The state of the checkbox is
+         * determined by the `selected` option.
+         */
+        showCheckbox?: boolean;
+        /**
+         * (Highstock) Whether to display this particular series or series type
+         * in the legend. Standalone series are shown in legend by default, and
+         * linked series are not. Since v7.2.0 it is possible to show series
+         * that use colorAxis by setting this option to `true`.
+         */
+        showInLegend?: boolean;
+        /**
+         * (Highstock) Deprecated. Use series.accessibility.keyboardNavigation
+         * instead.
          *
-         * Highcharts Stock's linear regression algorithm (least squares method)
-         * will utilize these "big" integers for finding the slope and the
-         * intercept of the regression line for each period. In consequence,
-         * this value may be a very "small" decimal number that's hard to
-         * interpret by a human.
+         * If set to `true`, the accessibility module will skip past the points
+         * in this series for keyboard navigation.
          *
-         * For instance: `xAxisUnit` equaled to `86400000` ms (1 day) forces the
-         * algorithm to treat `86400000` as `1` while computing the slope and
-         * the intercept. This may enhance the legibility of the indicator's
-         * values.
+         * @deprecated 8.0.0
+         */
+        skipKeyboardNavigation?: boolean;
+        /**
+         * (Highcharts, Highstock) When this is true, the series will not cause
+         * the Y axis to cross the zero plane (or threshold option) unless the
+         * data actually crosses the plane.
          *
-         * Default value is the closest distance between two data points.
+         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
+         * will make the Y axis show negative values according to the
+         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
+         * at 0.
+         */
+        softThreshold?: boolean;
+        /**
+         * (Highstock) Sonification/audio chart options for a series.
+         */
+        sonification?: Highcharts.SeriesSonificationOptions;
+        /**
+         * (Highstock) A collection of options for different series states.
+         *
+         * In addition to the options documented under each state, any option
+         * from the parent series type can be set, with exception of `data` and
+         * `states`.
+         */
+        states?: Highcharts.SeriesStatesOptionsObject;
+        /**
+         * (Highcharts, Highstock) Whether to apply steps to the line. Possible
+         * values are `left`, `center` and `right`.
+         */
+        step?: Highcharts.OptionsStepValue;
+        /**
+         * (Highstock) Sticky tracking of mouse events. When true, the
+         * `mouseOut` event on a series isn't triggered until the mouse moves
+         * over another series, or out of the plot area. When false, the
+         * `mouseOut` event on a series is triggered when the mouse leaves the
+         * area around the series' graph or markers. This also implies the
+         * tooltip when not shared. When `stickyTracking` is false and
+         * `tooltip.shared` is false, the tooltip will be hidden when moving the
+         * mouse between series. Defaults to true for line and area type series,
+         * but to false for columns, pies etc.
+         *
+         * **Note:** The boost module will force this option because of
+         * technical limitations.
+         */
+        stickyTracking?: boolean;
+        /**
+         * (Highcharts, Highstock) The threshold, also called zero level or base
+         * level. For line type series this is only used in conjunction with
+         * negativeColor.
+         */
+        threshold?: (number|null);
+        /**
+         * (Highstock) A configuration object for the tooltip rendering of each
+         * single series. Properties are inherited from tooltip, but only the
+         * following properties can be defined on a series level.
+         */
+        tooltip?: Highcharts.SeriesTooltipOptionsObject;
+        /**
+         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
+         * that is longer than this, the Series class looks for data
+         * configurations of plain numbers or arrays of numbers. The first and
+         * last valid points are checked. If found, the rest of the data is
+         * assumed to be the same. This saves expensive data checking and
+         * indexing in long series, and makes data-heavy charts render faster.
+         *
+         * Set it to `0` disable.
+         *
+         * Note:
+         *
+         * - In boost mode turbo threshold is forced. Only array of numbers or
+         * two dimensional arrays are allowed.
+         *
+         * - In version 11.4.3 and earlier, if object configurations were passed
+         * beyond the turbo threshold, a warning was logged in the console and
+         * the data series didn't render.
+         */
+        turboThreshold?: number;
+        /**
+         * (Highstock) Set the initial visibility of the series.
+         */
+        visible?: boolean;
+        /**
+         * (Highcharts, Highstock) Defines the Axis on which the zones are
+         * applied.
+         */
+        zoneAxis?: string;
+        /**
+         * (Highcharts, Highstock) An array defining zones within a series.
+         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
+         * according to the `zoneAxis` option. The zone definitions have to be
+         * in ascending order regarding to the value.
+         *
+         * In styled mode, the color zones are styled with the
+         * `.highcharts-zone-{n}` class, or custom classed from the `className`
+         * option (view live demo).
+         */
+        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
+        /**
+         * (Highstock) Whether to zoom non-cartesian series. If `chart.zooming`
+         * is set, the option allows to disable zooming on an individual
+         * non-cartesian series. By default zooming is enabled for all series.
          *
-         * In `v9.0.2`, the default value has been changed from `undefined` to
-         * `null`.
+         * **Note**: This option works only for non-cartesian series.
          */
-        xAxisUnit?: (number|null);
+        zoomEnabled?: boolean;
     }
     /**
      * (Highcharts, Highstock) Animation setting for hovering the graph in