highcharts 13.0.0 → 13.0.2

package/options/ema.d.ts

@@ -52,698 +52,79 @@ declare module "../highcharts" {
         duration?: number;
     }
     /**
-     * (Highstock) Options for the _Series on point_ feature. Only `pie` and
-     * `sunburst` series are supported at this moment.
+     * (Highstock) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
      */
-    interface PlotEmaOnPointOptions {
+    interface PlotEmaOnPointConnectorOptions {
         /**
-         * (Highstock) Options for the connector in the _Series on point_
-         * feature.
-         *
-         * In styled mode, the connector can be styled with the
-         * `.highcharts-connector-seriesonpoint` class name.
+         * (Highstock) A name for the dash style to use for the connector.
          */
-        connectorOptions?: (Highcharts.PlotEmaOnPointConnectorOptions|Highcharts.SVGAttributes);
+        dashstyle?: string;
         /**
-         * (Highstock) The `id` of the point that we connect the series to. Only
-         * points with a given `plotX` and `plotY` values and map points are
-         * valid.
+         * (Highstock) Color of the connector line. By default it's the series'
+         * color.
          */
-        id?: string;
+        stroke?: string;
         /**
-         * (Highstock) Options allowing to set a position and an offset of the
-         * series in the _Series on point_ feature.
+         * (Highstock) Pixel width of the connector line.
          */
-        position?: (object|Highcharts.PlotEmaOnPointPositionOptions);
+        width?: number;
     }
     /**
-     * (Highstock) Exponential moving average indicator (EMA). This series
-     * requires the `linkedTo` option to be set.
-     *
-     * Configuration options for the series are given in three levels:
-     *
-     * 1. Options for all series in a chart are defined in the
-     * plotOptions.series object.
-     *
-     * 2. Options for all `ema` series are defined in plotOptions.ema.
-     *
-     * 3. Options for one single series are given in the series instance array.
-     * (see online documentation for example)
-     *
-     * **TypeScript:**
-     *
-     * - type option should always be set, otherwise a broad set of unsupported
-     * options is allowed.
-     *
-     * - when accessing an array of series, the combined set of all series types
-     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
-     * specific type can be done by checking the `type` property. (see online
-     * documentation for example)
+     * (Highstock) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
      */
-    interface PlotEmaOptions {
-        /**
-         * (Highstock) Accessibility options for a series.
-         */
-        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
-        /**
-         * (Highstock) Allow this series' points to be selected by clicking on
-         * the graphic (columns, point markers, pie slices, map areas etc).
-         *
-         * The selected points can be handled by point select and unselect
-         * events, or collectively by the getSelectedPoints function.
-         *
-         * And alternative way of selecting points is through dragging.
-         */
-        allowPointSelect?: boolean;
-        /**
-         * (Highstock) Enable or disable the initial animation when a series is
-         * displayed. The animation can also be set as a configuration object.
-         * Please note that this option only applies to the initial animation of
-         * the series itself. For other animations, see chart.animation and the
-         * animation parameter under the API methods. The following properties
-         * are supported:
-         *
-         * - `defer`: The animation delay time in milliseconds.
-         *
-         * - `duration`: The duration of the animation in milliseconds.
-         * (Defaults to `1000`)
-         *
-         * - `easing`: Can be a string reference to an easing function set on
-         * the `Math` object or a function. See the _Custom easing function_
-         * demo below. (Defaults to `easeInOutSine`)
-         *
-         * Due to poor performance, animation is disabled in old IE browsers for
-         * several chart types.
-         */
-        animation?: (boolean|Highcharts.AnimationOptionsObject);
-        /**
-         * (Highstock) For some series, there is a limit that shuts down
-         * animation by default when the total number of points in the chart is
-         * too high. For example, for a column chart and its derivatives,
-         * animation does not run if there is more than 250 points totally. To
-         * disable this cap, set `animationLimit` to `Infinity`. This option
-         * works if animation is fired on individual points, not on a group of
-         * points like e.g. during the initial animation.
-         */
-        animationLimit?: number;
-        /**
-         * (Highstock) Sets the color blending in the boost module.
-         */
-        boostBlending?: Highcharts.OptionsBoostBlendingValue;
-        /**
-         * (Highstock) Set the point threshold for when a series should enter
-         * boost mode.
-         *
-         * Setting it to e.g. 2000 will cause the series to enter boost mode
-         * when there are 2000 or more points in the series.
-         *
-         * To disable boosting on the series, set the `boostThreshold` to 0.
-         * Setting it to 1 will force boosting.
-         *
-         * Note that the cropThreshold also affects this setting. When zooming
-         * in on a series that has fewer points than the `cropThreshold`, all
-         * points are rendered although outside the visible plot area, and the
-         * `boostThreshold` won't take effect.
-         */
-        boostThreshold?: number;
-        /**
-         * (Highstock) An additional class name to apply to the series'
-         * graphical elements. This option does not replace default class names
-         * of the graphical element. Changes to the series' color will also be
-         * reflected in a chart's legend and tooltip.
-         */
-        className?: string;
-        /**
-         * (Highstock) Disable this option to allow series rendering in the
-         * whole plotting area.
-         *
-         * **Note:** Clipping should be always enabled when chart.zoomType is
-         * set
-         */
-        clip?: boolean;
-        /**
-         * (Highstock) The main color of the series. In line type series it
-         * applies to the line and the point markers unless otherwise specified.
-         * In bar type series it applies to the bars unless a color is specified
-         * per point. The default value is pulled from the `options.colors`
-         * array.
-         *
-         * In styled mode, the color can be defined by the colorIndex option.
-         * Also, the series color can be set with the `.highcharts-series`,
-         * `.highcharts-color-{n}`, `.highcharts-{type}-series` or
-         * `.highcharts-series-{n}` class, or individual classes given by the
-         * `className` option.
-         */
-        color?: Highcharts.ColorType;
-        /**
-         * (Highstock) Styled mode only. A specific color index to use for the
-         * series, so its graphic representations are given the class name
-         * `highcharts-color-{n}`.
-         *
-         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
-         * changing the color scheme very convenient.
-         */
-        colorIndex?: number;
-        /**
-         * (Highcharts, Highstock, Highmaps) Determines what data value should
-         * be used to calculate point color if `colorAxis` is used. Requires to
-         * set `min` and `max` if some custom point property is used or if
-         * approximation for data grouping is set to `'sum'`.
-         */
-        colorKey?: string;
-        /**
-         * (Highstock) Compare the values of the series against the first
-         * non-null, non- zero value in the visible range. The y axis will show
-         * percentage or absolute change depending on whether `compare` is set
-         * to `"percent"` or `"value"`. When this is applied to multiple series,
-         * it allows comparing the development of the series against each other.
-         * Adds a `change` field to every point object. If a `compare` value is
-         * not set on a linked series, it will be inherited from the parent
-         * series.
-         */
-        compare?: Highcharts.OptionsCompareValue;
-        /**
-         * (Highstock) When compare is `percent`, this option dictates whether
-         * to use 0 or 100 as the base of comparison.
-         */
-        compareBase?: (0|100);
-        /**
-         * (Highstock) Defines if comparison should start from the first point
-         * within the visible range or should start from the last point
-         * **before** the range.
-         *
-         * In other words, this flag determines if first point within the
-         * visible range will have 0% (`compareStart=true`) or should have been
-         * already calculated according to the previous point
-         * (`compareStart=false`).
-         */
-        compareStart?: boolean;
-        /**
-         * (Highstock) Whether to compare indicator to the main series values or
-         * indicator values.
-         */
-        compareToMain?: boolean;
-        /**
-         * (Highcharts, Highstock) Whether to connect a graph line across null
-         * points, or render a gap between the two points on either side of the
-         * null.
-         *
-         * In stacked area chart, if `connectNulls` is set to true, null points
-         * are interpreted as 0.
-         */
-        connectNulls?: boolean;
-        /**
-         * (Highcharts, Highstock, Gantt) When true, each point or column edge
-         * is rounded to its nearest pixel in order to render sharp on screen.
-         * In some cases, when there are a lot of densely packed columns, this
-         * leads to visible difference in column widths or distance between
-         * columns. In these cases, setting `crisp` to `false` may look better,
-         * even though each column is rendered blurry.
-         */
-        crisp?: boolean;
-        /**
-         * (Highcharts, Highstock) When the series contains less points than the
-         * crop threshold, all points are drawn, even if the points fall outside
-         * the visible plot area at the current zoom. The advantage of drawing
-         * all points (including markers and columns), is that animation is
-         * performed on updates. On the other hand, when the series contains
-         * more points than the crop threshold, the series data is cropped to
-         * only contain points that fall within the plot area. The advantage of
-         * cropping away invisible points is to increase performance on large
-         * series.
-         */
-        cropThreshold?: number;
-        /**
-         * (Highstock) Cumulative Sum feature replaces points' values with the
-         * following formula: `sum of all previous points' values + current
-         * point's value`. Works only for points in a visible range. Adds the
-         * `cumulativeSum` field to each point object that can be accessed e.g.
-         * in the tooltip.pointFormat.
-         *
-         * With `dataGrouping` enabled, default grouping approximation is set to
-         * `sum`.
-         */
-        cumulative?: boolean;
-        /**
-         * (Highstock) Defines if cumulation should start from the first point
-         * within the visible range or should start from the last point
-         * **before** the range.
-         *
-         * In other words, this flag determines if first point within the
-         * visible range will start at 0 (`cumulativeStart=true`) or should have
-         * been already calculated according to the previous point
-         * (`cumulativeStart=false`).
-         */
-        cumulativeStart?: boolean;
+    interface PlotEmaOnPointPositionOptions {
         /**
-         * (Highstock) You can set the cursor to "pointer" if you have click
-         * events attached to the series, to signal to the user that the points
-         * and lines can be clicked.
-         *
-         * In styled mode, the series cursor can be set with the same classes as
-         * listed under series.color.
+         * (Highstock) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
          */
-        cursor?: (string|Highcharts.CursorValue);
+        offsetX?: number;
         /**
-         * (Highstock) A reserved subspace to store options and values for
-         * customized functionality. Here you can add additional data for your
-         * own event callbacks and formatter callbacks.
-         */
-        custom?: Highcharts.Dictionary<any>;
-        /**
-         * (Highstock) Name of the dash style to use for the graph, or for some
-         * series types the outline of each shape.
-         *
-         * In styled mode, the stroke dash-array can be set with the same
-         * classes as listed under series.color.
-         */
-        dashStyle?: Highcharts.DashStyleValue;
-        /**
-         * (Highstock) Data grouping is the concept of sampling the data values
-         * into larger blocks in order to ease readability and increase
-         * performance of the JavaScript charts. Highcharts Stock by default
-         * applies data grouping when the points become closer than a certain
-         * pixel value, determined by the `groupPixelWidth` option.
-         *
-         * If data grouping is applied, the grouping information of grouped
-         * points can be read from the Point.dataGroup. If point options other
-         * than the data itself are set, for example `name` or `color` or custom
-         * properties, the grouping logic doesn't know how to group it. In this
-         * case the options of the first point instance are copied over to the
-         * group point. This can be altered through a custom `approximation`
-         * callback function.
-         */
-        dataGrouping?: Highcharts.DataGroupingOptionsObject;
-        /**
-         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
-         * labels, appearing next to each data point.
-         *
-         * Since v6.2.0, multiple data labels can be applied to each single
-         * point by defining them as an array of configs.
-         *
-         * In styled mode, the data labels can be styled with the
-         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
-         * (see example).
-         */
-        dataLabels?: (Highcharts.PlotEmaDataLabelsOptions|Array<Highcharts.PlotEmaDataLabelsOptions>);
-        /**
-         * (Highstock) The mapping between the data table and the series data
-         * points. This is used in conjunction with the `dataTable` option (on
-         * chart or series level) to map columns from the data table to the
-         * properties of the data points. The keys of the `dataMapping` object
-         * correspond to the properties of the data points (e.g. `x`, `y`,
-         * `name`), and the values are objects that specify which column from
-         * which data table to use for that property.
-         *
-         * The keys can also be nested paths, for example `dataLabel.format`, to
-         * map to nested properties of the data points.
-         *
-         * The values can also be strings, in which case they are interpreted as
-         * column id's from the first data table.
-         *
-         * A typical use case is that multiple series share a common column,
-         * like `name` or `x`. In this case, to avoid repetition, the common
-         * column can be applied in `plotOptions.series.dataMapping` and the
-         * individual series can specify only the columns that are unique to
-         * them.
-         *
-         * The series name defaults to the column ID of the main data column in
-         * the mapping. The main data column is typically the `y` data for
-         * cartesian series, or `value` for map series. For example, if the
-         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
-         * online documentation for example)
-         *
-         * If the columns of the DataTable have keys matching the series keys,
-         * the data mapping is not necessary. For example, this DataTable will
-         * connect directly to the series' `x` and `y` keys: (see online
-         * documentation for example)
-         */
-        dataMapping?: Highcharts.DataMappingOptionsObject;
-        /**
-         * (Highcharts, Highstock) Options for series data sorting.
-         */
-        dataSorting?: Highcharts.PlotEmaDataSortingOptions;
-        /**
-         * (Highstock) Deprecated. Use
-         * plotOptions.series.accessibility.description instead.
-         *
-         * A description of the series to add to the screen reader information
-         * about the series.
-         *
-         * @deprecated 8.0.0
-         */
-        description?: string;
-        /**
-         * (Highstock) Enable or disable the mouse tracking for a specific
-         * series. This includes point tooltips and click events on graphs and
-         * points. For large datasets it improves performance.
-         */
-        enableMouseTracking?: boolean;
-        /**
-         * (Highstock) General event handlers for the series items. These event
-         * hooks can also be attached to the series at run time using the
-         * `Highcharts.addEvent` function.
-         */
-        events?: Highcharts.SeriesEventsOptionsObject;
-        /**
-         * (Highstock) Determines whether the series should look for the nearest
-         * point in both dimensions or just the x-dimension when hovering the
-         * series. Defaults to `'xy'` for scatter series and `'x'` for most
-         * other series. If the data has duplicate x-values, it is recommended
-         * to set this to `'xy'` to allow hovering over all points.
-         *
-         * Applies only to series types using nearest neighbor search (not
-         * direct hover) for tooltip.
-         */
-        findNearestPointBy?: Highcharts.OptionsFindNearestPointByValue;
-        /**
-         * (Highcharts, Highstock) Defines when to display a gap in the graph,
-         * together with the gapUnit option.
-         *
-         * In case when `dataGrouping` is enabled, points can be grouped into a
-         * larger time span. This can make the grouped points to have a greater
-         * distance than the absolute value of `gapSize` property, which will
-         * result in disappearing graph completely. To prevent this situation
-         * the mentioned distance between grouped points is used instead of
-         * previously defined `gapSize`.
-         *
-         * In practice, this option is most often used to visualize gaps in time
-         * series. In a stock chart, intraday data is available for daytime
-         * hours, while gaps will appear in nights and weekends.
-         */
-        gapSize?: number;
-        /**
-         * (Highcharts, Highstock) Together with gapSize, this option defines
-         * where to draw gaps in the graph.
-         *
-         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
-         * that if the distance between two points is greater than 5 times that
-         * of the two closest points, the graph will be broken.
-         *
-         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
-         * values, which on a datetime axis is milliseconds. This also applies
-         * to the navigator series that inherits gap options from the base
-         * series.
-         */
-        gapUnit?: Highcharts.OptionsGapUnitValue;
-        /**
-         * (Highcharts, Highstock, Gantt) Whether to use the Y extremes of the
-         * total chart width or only the zoomed area when zooming in on parts of
-         * the X axis. By default, the Y axis adjusts to the min and max of the
-         * visible data. Cartesian series only.
-         */
-        getExtremesFromAll?: boolean;
-        /**
-         * (Highstock) Highlight only the hovered point and fade the remaining
-         * points.
-         *
-         * Scatter-type series require enabling the 'inactive' marker state and
-         * adjusting opacity. Note that this approach could affect performance
-         * with large datasets.
-         */
-        inactiveOtherPoints?: boolean;
-        /**
-         * (Highstock) When set to `false` will prevent the series data from
-         * being included in any form of data export.
-         *
-         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
-         * as `includeInCSVExport`.
-         */
-        includeInDataExport?: boolean;
-        /**
-         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
-         * the series as possible in a natural way, seeking to avoid other
-         * series. The goal of this feature is to make the chart more easily
-         * readable, like if a human designer placed the labels in the optimal
+         * (Highstock) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
          * position.
-         *
-         * The series labels currently work with series types having a `graph`
-         * or an `area`.
-         */
-        label?: Highcharts.SeriesLabelOptionsObject;
-        /**
-         * (Highstock) The line marks the last price from all points.
-         */
-        lastPrice?: Highcharts.SeriesLastPriceOptionsObject;
-        /**
-         * (Highstock) The line marks the last price from visible range of
-         * points.
-         */
-        lastVisiblePrice?: Highcharts.SeriesLastVisiblePriceOptionsObject;
-        /**
-         * (Highstock) What type of legend symbol to render for this series. Can
-         * be one of `areaMarker`, `lineMarker` or `rectangle`.
-         */
-        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
-        /**
-         * (Highcharts, Highstock, Highmaps) Defines the color of the legend
-         * symbol for this series. Defaults to undefined, in which case the
-         * series color is used. Does not work with styled mode.
-         */
-        legendSymbolColor?: Highcharts.ColorType;
-        /**
-         * (Highstock) The line cap used for line ends and line joins on the
-         * graph.
          */
-        linecap?: Highcharts.SeriesLinecapValue;
+        offsetY?: number;
         /**
-         * (Highcharts, Highstock) Pixel width of the graph line.
+         * (Highstock) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
          */
-        lineWidth?: number;
+        x?: number;
         /**
-         * (Highcharts, Highstock, Gantt) The main series ID that indicator will
-         * be based on. Required for this indicator.
+         * (Highstock) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
          */
-        linkedTo?: string;
-        /**
-         * (Highstock) Options for the point markers of line and scatter-like
-         * series. Properties like `fillColor`, `lineColor` and `lineWidth`
-         * define the visual appearance of the markers. The `symbol` option
-         * defines the shape. Other series types, like column series, don't have
-         * markers, but have visual options on the series level instead.
-         *
-         * In styled mode, the markers can be styled with the
-         * `.highcharts-point`, `.highcharts-point-hover` and
-         * `.highcharts-point-select` class names.
-         */
-        marker?: Highcharts.PointMarkerOptionsObject;
-        /**
-         * (Highstock) The name of the series as shown in the legend, tooltip
-         * etc. If not set, it will be based on a technical indicator type and
-         * default params.
-         */
-        name?: string;
-        /**
-         * (Highstock) The color for the parts of the graph or points that are
-         * below the threshold. Note that `zones` takes precedence over the
-         * negative color. Using `negativeColor` is equivalent to applying a
-         * zone with value of 0.
-         */
-        negativeColor?: Highcharts.ColorType;
-        /**
-         * (Highcharts, Highstock) Whether or not data-points with the value of
-         * `null` should be interactive. When this is set to `true`, tooltips
-         * may highlight these points, and this option also enables keyboard
-         * navigation for such points. Format options for such points include
-         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
-         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
-         */
-        nullInteraction?: (boolean|undefined);
-        /**
-         * (Highstock) Options for the _Series on point_ feature. Only `pie` and
-         * `sunburst` series are supported at this moment.
-         */
-        onPoint?: (object|Highcharts.PlotEmaOnPointOptions);
-        /**
-         * (Highstock) Opacity of a series parts: line, fill (e.g. area) and
-         * dataLabels.
-         */
-        opacity?: number;
-        /**
-         * (Highstock) Parameters used in calculation of regression series'
-         * points.
-         */
-        params?: Highcharts.PlotEmaParamsOptions;
-        /**
-         * (Highstock) Properties for each single point.
-         */
-        point?: Highcharts.PlotSeriesPointOptions;
-        /**
-         * (Highstock) Deprecated. Use
-         * series.accessibility.point.descriptionFormat instead.
-         *
-         * Same as accessibility.point.descriptionFormat, but for an individual
-         * series. Overrides the chart wide configuration.
-         *
-         * @deprecated 12.6.0
-         */
-        pointDescriptionFormat?: Function;
-        /**
-         * (Highstock) Deprecated. Use
-         * series.accessibility.point.descriptionFormatter instead.
-         *
-         * Same as accessibility.series.descriptionFormatter, but for an
-         * individual series. Overrides the chart wide configuration.
-         *
-         * @deprecated 8.0.0
-         */
-        pointDescriptionFormatter?: Function;
-        /**
-         * (Highcharts, Highstock) When true, X values in the data set are
-         * relative to the current `pointStart`, `pointInterval` and
-         * `pointIntervalUnit` settings. This allows compression of the data for
-         * datasets with irregular X values.
-         *
-         * The real X values are computed on the formula `f(x) = ax + b`, where
-         * `a` is the `pointInterval` (optionally with a time unit given by
-         * `pointIntervalUnit`), and `b` is the `pointStart`.
-         */
-        relativeXValue?: boolean;
-        /**
-         * (Highstock) Whether to select the series initially. If `showCheckbox`
-         * is true, the checkbox next to the series name in the legend will be
-         * checked for a selected series.
-         */
-        selected?: boolean;
-        /**
-         * (Highstock) Whether to apply a drop shadow to the graph line. Since
-         * 2.3 the shadow can be an object configuration containing `color`,
-         * `offsetX`, `offsetY`, `opacity` and `width`.
-         *
-         * Note that in some cases, like stacked columns or other dense layouts,
-         * the series may cast shadows on each other. In that case, the
-         * `chart.seriesGroupShadow` allows applying a common drop shadow to the
-         * whole series group.
-         */
-        shadow?: (boolean|Highcharts.ShadowOptionsObject);
-        /**
-         * (Highstock) If true, a checkbox is displayed next to the legend item
-         * to allow selecting the series. The state of the checkbox is
-         * determined by the `selected` option.
-         */
-        showCheckbox?: boolean;
-        /**
-         * (Highstock) Whether to display this particular series or series type
-         * in the legend. Standalone series are shown in legend by default, and
-         * linked series are not. Since v7.2.0 it is possible to show series
-         * that use colorAxis by setting this option to `true`.
-         */
-        showInLegend?: boolean;
-        /**
-         * (Highstock) Deprecated. Use series.accessibility.keyboardNavigation
-         * instead.
-         *
-         * If set to `true`, the accessibility module will skip past the points
-         * in this series for keyboard navigation.
-         *
-         * @deprecated 8.0.0
-         */
-        skipKeyboardNavigation?: boolean;
-        /**
-         * (Highcharts, Highstock) When this is true, the series will not cause
-         * the Y axis to cross the zero plane (or threshold option) unless the
-         * data actually crosses the plane.
-         *
-         * For example, if `softThreshold` is `false`, a series of 0, 1, 2, 3
-         * will make the Y axis show negative values according to the
-         * `minPadding` option. If `softThreshold` is `true`, the Y axis starts
-         * at 0.
-         */
-        softThreshold?: boolean;
-        /**
-         * (Highstock) Sonification/audio chart options for a series.
-         */
-        sonification?: Highcharts.SeriesSonificationOptions;
-        /**
-         * (Highstock) A collection of options for different series states.
-         */
-        states?: Highcharts.SeriesStatesOptionsObject;
-        /**
-         * (Highcharts, Highstock) Whether to apply steps to the line. Possible
-         * values are `left`, `center` and `right`.
-         */
-        step?: Highcharts.OptionsStepValue;
-        /**
-         * (Highstock) Sticky tracking of mouse events. When true, the
-         * `mouseOut` event on a series isn't triggered until the mouse moves
-         * over another series, or out of the plot area. When false, the
-         * `mouseOut` event on a series is triggered when the mouse leaves the
-         * area around the series' graph or markers. This also implies the
-         * tooltip when not shared. When `stickyTracking` is false and
-         * `tooltip.shared` is false, the tooltip will be hidden when moving the
-         * mouse between series. Defaults to true for line and area type series,
-         * but to false for columns, pies etc.
-         *
-         * **Note:** The boost module will force this option because of
-         * technical limitations.
-         */
-        stickyTracking?: boolean;
-        /**
-         * (Highcharts, Highstock) The threshold, also called zero level or base
-         * level. For line type series this is only used in conjunction with
-         * negativeColor.
-         */
-        threshold?: (number|null);
-        /**
-         * (Highstock) A configuration object for the tooltip rendering of each
-         * single series. Properties are inherited from tooltip, but only the
-         * following properties can be defined on a series level.
-         */
-        tooltip?: Highcharts.SeriesTooltipOptionsObject;
-        /**
-         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
-         * that is longer than this, the Series class looks for data
-         * configurations of plain numbers or arrays of numbers. The first and
-         * last valid points are checked. If found, the rest of the data is
-         * assumed to be the same. This saves expensive data checking and
-         * indexing in long series, and makes data-heavy charts render faster.
-         *
-         * Set it to `0` disable.
-         *
-         * Note:
-         *
-         * - In boost mode turbo threshold is forced. Only array of numbers or
-         * two dimensional arrays are allowed.
-         *
-         * - In version 11.4.3 and earlier, if object configurations were passed
-         * beyond the turbo threshold, a warning was logged in the console and
-         * the data series didn't render.
-         */
-        turboThreshold?: number;
-        /**
-         * (Highstock) Set the initial visibility of the series.
-         */
-        visible?: boolean;
-        /**
-         * (Highcharts, Highstock) Defines the Axis on which the zones are
-         * applied.
-         */
-        zoneAxis?: string;
+        y?: number;
+    }
+    /**
+     * (Highstock) Parameters used in calculation of regression series' points.
+     */
+    interface PlotEmaParamsOptions {
         /**
-         * (Highcharts, Highstock) An array defining zones within a series.
-         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
-         * according to the `zoneAxis` option. The zone definitions have to be
-         * in ascending order regarding to the value.
+         * (Highstock) The point index which indicator calculations will base.
+         * For example using OHLC data, index=2 means the indicator will be
+         * calculated using Low values.
          *
-         * In styled mode, the color zones are styled with the
-         * `.highcharts-zone-{n}` class, or custom classed from the `className`
-         * option (view live demo).
+         * By default index value used to be set to 0. Since Highcharts Stock 7
+         * by default index is set to 3 which means that the ema indicator will
+         * be calculated using Close values.
          */
-        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
+        index?: number;
         /**
-         * (Highstock) Whether to zoom non-cartesian series. If `chart.zooming`
-         * is set, the option allows to disable zooming on an individual
-         * non-cartesian series. By default zooming is enabled for all series.
-         *
-         * **Note**: This option works only for non-cartesian series.
+         * (Highstock) The base period for indicator calculations. This is the
+         * number of data points which are taken into account for the indicator
+         * calculations.
          */
-        zoomEnabled?: boolean;
+        period?: number;
     }
     /**
-     * (Highcharts, Highstock) Animation setting for hovering the graph in
-     * line-type series.
+     * (Highcharts, Highstock) Animation when not hovering over the marker.
      */
-    interface PlotEmaStatesHoverAnimationOptions {
+    interface PlotEmaStatesInactiveAnimationOptions {
         /**
          * (Highcharts, Highstock) The duration of the hover animation in
          * milliseconds. By default the hover state animates quickly in, and
@@ -752,58 +133,55 @@ declare module "../highcharts" {
         duration?: number;
     }
     /**
-     * (Highcharts, Highstock) Animation setting for hovering the graph in
-     * line-type series.
+     * (Highcharts, Highstock, Gantt) For series on datetime axes, the date
+     * format in the tooltip's header will by default be guessed based on the
+     * closest data points. This member gives the default string representations
+     * used for each unit. For an overview of the string or object
+     * configuration, see dateFormat.
      */
-    interface PlotEmaStatesSelectAnimationOptions {
-        /**
-         * (Highcharts, Highstock) The duration of the hover animation in
-         * milliseconds. By default the hover state animates quickly in, and
-         * slowly back to normal.
-         */
-        duration?: number;
+    interface PlotEmaTooltipDateTimeLabelFormatsOptions {
+        day?: string;
+        hour?: string;
+        millisecond?: string;
+        minute?: string;
+        month?: string;
+        second?: string;
+        week?: string;
+        year?: string;
     }
     /**
-     * (Highstock) Options for the tooltip header when tooltip.split is enabled.
-     * The header is the box containing the X value in a split tooltip.
+     * (Highstock) Positioning options for fixed tooltip, taking effect only
+     * when tooltip.fixed is `true`.
      */
-    interface PlotEmaTooltipHeaderOptions {
-        /**
-         * (Highstock) Background color for the tooltip header when
-         * tooltip.split is enabled.
-         */
-        backgroundColor?: Highcharts.ColorType;
+    interface PlotEmaTooltipPositionOptions {
         /**
-         * (Highstock) Border color for the tooltip header when tooltip.split is
-         * enabled.
+         * (Highstock) The horizontal alignment of the fixed tooltip.
          */
-        borderColor?: Highcharts.ColorType;
+        align?: Highcharts.AlignValue;
         /**
-         * (Highstock) The width of the border for the tooltip header when
-         * tooltip.split is enabled.
+         * (Highstock) What the fixed tooltip alignment should be relative to.
+         *
+         * The default, `pane`, means that it is aligned within the plot area
+         * for that given series. If the tooltip is split (as default in Stock
+         * charts), each partial tooltip is aligned within the series' pane.
          */
-        borderWidth?: number;
+        relativeTo?: Highcharts.OptionsRelativeToValue;
         /**
-         * (Highstock) Distance between the plot area and the header (except the
-         * chevron) in a split tooltip, in pixels. The default value makes the
-         * header text align with the axis labels.
+         * (Highstock) The vertical alignment of the fixed tooltip.
          */
-        distance?: number;
+        verticalAlign?: Highcharts.VerticalAlignValue;
         /**
-         * (Highstock) The name of a symbol to use for the border around the
-         * tooltip header. Applies only when tooltip.split is enabled.
-         *
-         * Custom callbacks for symbol path generation can also be added to
-         * `Highcharts.SVGRenderer.prototype.symbols` the same way as for
-         * series.marker.symbol.
+         * (Highstock) X pixel offset from the given position. Can be used to
+         * shy away from axis lines, grid lines etc to avoid the tooltip
+         * overlapping other elements.
          */
-        shape?: string;
+        x?: number;
         /**
-         * (Highstock) CSS styles for the tooltip header. The default is `{
-         * fontSize: '1em' }`, ensuring that the header text is the same size as
-         * the axis labels.
+         * (Highstock) Y pixel offset from the given position. Can be used to
+         * shy away from axis lines, grid lines etc to avoid the tooltip
+         * overlapping other elements.
          */
-        style?: object;
+        y?: number;
     }
     /**
      * (Highstock) A `EMA` series. If the type option is not specified, it is