hane 1.1.1 → 1.2.0

package/vendor/zlib/contrib/puff/puff.h

@@ -1,35 +1,35 @@
-/* puff.h
-  Copyright (C) 2002-2013 Mark Adler, all rights reserved
-  version 2.3, 21 Jan 2013
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the author be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Mark Adler    madler@alumni.caltech.edu
- */
-
-
-/*
- * See puff.c for purpose and usage.
- */
-#ifndef NIL
-#  define NIL ((unsigned char *)0)      /* for no output option */
-#endif
-
-int puff(unsigned char *dest,           /* pointer to destination pointer */
-         unsigned long *destlen,        /* amount of output space */
-         const unsigned char *source,   /* pointer to source data pointer */
-         unsigned long *sourcelen);     /* amount of input available */
+/* puff.h
+  Copyright (C) 2002-2013 Mark Adler, all rights reserved
+  version 2.3, 21 Jan 2013
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler    madler@alumni.caltech.edu
+ */
+
+
+/*
+ * See puff.c for purpose and usage.
+ */
+#ifndef NIL
+#  define NIL ((unsigned char *)0)      /* for no output option */
+#endif
+
+int puff(unsigned char *dest,           /* pointer to destination pointer */
+         unsigned long *destlen,        /* amount of output space */
+         const unsigned char *source,   /* pointer to source data pointer */
+         unsigned long *sourcelen);     /* amount of input available */

package/vendor/zlib/contrib/puff/pufftest.c

@@ -1,169 +1,169 @@
-/*
- * pufftest.c
- * Copyright (C) 2002-2013 Mark Adler
- * For conditions of distribution and use, see copyright notice in puff.h
- * version 2.3, 21 Jan 2013
- */
-
-/* Example of how to use puff().
-
-   Usage: puff [-w] [-f] [-nnn] file
-          ... | puff [-w] [-f] [-nnn]
-
-   where file is the input file with deflate data, nnn is the number of bytes
-   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-   -w is used to write the decompressed data to stdout.  -f is for coverage
-   testing, and causes pufftest to fail with not enough output space (-f does
-   a write like -w, so -w is not required). */
-
-#if defined(_WIN32) && !defined(_CRT_NONSTDC_NO_DEPRECATE)
-#  define _CRT_NONSTDC_NO_DEPRECATE
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "puff.h"
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
-#  include <fcntl.h>
-#  include <io.h>
-#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#  define SET_BINARY_MODE(file)
-#endif
-
-#define local static
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
-   3, or 5 times a power of 2 -- the result is always > size, until the result
-   is the maximum value of an unsigned long, where it remains.  This is useful
-   to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
-    int n;
-    size_t m;
-
-    m = size;
-    for (n = 0; m; n++)
-        m >>= 1;
-    if (n < 3)
-        return size + 1;
-    n -= 3;
-    m = size >> n;
-    m += m == 6 ? 2 : 1;
-    m <<= n;
-    return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
-   Reallocate to larger buffers until the entire file is read in.  Return a
-   pointer to the allocated data, or NULL if there was a memory allocation
-   failure.  *len is the number of bytes of data read from the input file (even
-   if load() returns NULL).  If the input file was empty or could not be opened
-   or read, *len is zero. */
-local void *load(const char *name, size_t *len)
-{
-    size_t size;
-    void *buf, *swap;
-    FILE *in;
-
-    *len = 0;
-    buf = malloc(size = 4096);
-    if (buf == NULL)
-        return NULL;
-    in = name == NULL ? stdin : fopen(name, "rb");
-    if (in != NULL) {
-        for (;;) {
-            *len += fread((char *)buf + *len, 1, size - *len, in);
-            if (*len < size) break;
-            size = bythirds(size);
-            if (size == *len || (swap = realloc(buf, size)) == NULL) {
-                free(buf);
-                buf = NULL;
-                break;
-            }
-            buf = swap;
-        }
-        fclose(in);
-    }
-    return buf;
-}
-
-int main(int argc, char **argv)
-{
-    int ret, put = 0, fail = 0;
-    unsigned skip = 0;
-    char *arg, *name = NULL;
-    unsigned char *source = NULL, *dest;
-    size_t len = 0;
-    unsigned long sourcelen, destlen;
-
-    /* process arguments */
-    while (arg = *++argv, --argc)
-        if (arg[0] == '-') {
-            if (arg[1] == 'w' && arg[2] == 0)
-                put = 1;
-            else if (arg[1] == 'f' && arg[2] == 0)
-                fail = 1, put = 1;
-            else if (arg[1] >= '0' && arg[1] <= '9')
-                skip = (unsigned)atoi(arg + 1);
-            else {
-                fprintf(stderr, "invalid option %s\n", arg);
-                return 3;
-            }
-        }
-        else if (name != NULL) {
-            fprintf(stderr, "only one file name allowed\n");
-            return 3;
-        }
-        else
-            name = arg;
-    source = load(name, &len);
-    if (source == NULL) {
-        fprintf(stderr, "memory allocation failure\n");
-        return 4;
-    }
-    if (len == 0) {
-        fprintf(stderr, "could not read %s, or it was empty\n",
-                name == NULL ? "<stdin>" : name);
-        free(source);
-        return 3;
-    }
-    if (skip >= len) {
-        fprintf(stderr, "skip request of %d leaves no input\n", skip);
-        free(source);
-        return 3;
-    }
-
-    /* test inflate data with offset skip */
-    len -= skip;
-    sourcelen = (unsigned long)len;
-    ret = puff(NIL, &destlen, source + skip, &sourcelen);
-    if (ret)
-        fprintf(stderr, "puff() failed with return code %d\n", ret);
-    else {
-        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
-                                     len - sourcelen);
-    }
-
-    /* if requested, inflate again and write decompressed data to stdout */
-    if (put && ret == 0) {
-        if (fail)
-            destlen >>= 1;
-        dest = malloc(destlen);
-        if (dest == NULL) {
-            fprintf(stderr, "memory allocation failure\n");
-            free(source);
-            return 4;
-        }
-        puff(dest, &destlen, source + skip, &sourcelen);
-        SET_BINARY_MODE(stdout);
-        fwrite(dest, 1, destlen, stdout);
-        free(dest);
-    }
-
-    /* clean up */
-    free(source);
-    return ret;
-}
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2013 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.3, 21 Jan 2013
+ */
+
+/* Example of how to use puff().
+
+   Usage: puff [-w] [-f] [-nnn] file
+          ... | puff [-w] [-f] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout.  -f is for coverage
+   testing, and causes pufftest to fail with not enough output space (-f does
+   a write like -w, so -w is not required). */
+
+#if defined(_WIN32) && !defined(_CRT_NONSTDC_NO_DEPRECATE)
+#  define _CRT_NONSTDC_NO_DEPRECATE
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
+    FILE *in;
+
+    *len = 0;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
+    }
+    return buf;
+}
+
+int main(int argc, char **argv)
+{
+    int ret, put = 0, fail = 0;
+    unsigned skip = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
+
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] == 'f' && arg[2] == 0)
+                fail = 1, put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = (unsigned)atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
+    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressed data to stdout */
+    if (put && ret == 0) {
+        if (fail)
+            destlen >>= 1;
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        SET_BINARY_MODE(stdout);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
+    free(source);
+    return ret;
+}

package/vendor/zlib/contrib/untgz/Makefile

@@ -1,14 +1,14 @@
-CC=cc
-CFLAGS=-g
-
-untgz: untgz.o ../../libz.a
-	$(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz
-
-untgz.o: untgz.c ../../zlib.h
-	$(CC) $(CFLAGS) -c -I../.. untgz.c
-
-../../libz.a:
-	cd ../..; ./configure; make
-
-clean:
-	rm -f untgz untgz.o *~
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o ../../libz.a
+	$(CC) $(CFLAGS) -o untgz untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+	$(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+	cd ../..; ./configure; make
+
+clean:
+	rm -f untgz untgz.o *~

package/vendor/zlib/contrib/untgz/Makefile.msc

@@ -1,17 +1,17 @@
-CC=cl
-CFLAGS=-MD
-
-untgz.exe: untgz.obj ..\..\zlib.lib
-	$(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib
-
-untgz.obj: untgz.c ..\..\zlib.h
-	$(CC) $(CFLAGS) -c -I..\.. untgz.c
-
-..\..\zlib.lib:
-	cd ..\..
-	$(MAKE) -f win32\makefile.msc
-	cd contrib\untgz
-
-clean:
-	-del untgz.obj
-	-del untgz.exe
+CC=cl
+CFLAGS=-MD
+
+untgz.exe: untgz.obj ..\..\zlib.lib
+	$(CC) $(CFLAGS) untgz.obj ..\..\zlib.lib
+
+untgz.obj: untgz.c ..\..\zlib.h
+	$(CC) $(CFLAGS) -c -I..\.. untgz.c
+
+..\..\zlib.lib:
+	cd ..\..
+	$(MAKE) -f win32\makefile.msc
+	cd contrib\untgz
+
+clean:
+	-del untgz.obj
+	-del untgz.exe