hane 1.1.1 → 1.2.0

package/vendor/zlib/contrib/iostream2/zstream.h

@@ -1,307 +1,307 @@
-/*
- *
- * Copyright (c) 1997
- * Christian Michelsen Research AS
- * Advanced Computing
- * Fantoftvegen 38, 5036 BERGEN, Norway
- * http://www.cmr.no
- *
- * Permission to use, copy, modify, distribute and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and
- * that both that copyright notice and this permission notice appear
- * in supporting documentation.  Christian Michelsen Research AS makes no
- * representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied warranty.
- *
- */
-
-#ifndef ZSTREAM__H
-#define ZSTREAM__H
-
-/*
- * zstream.h - C++ interface to the 'zlib' general purpose compression library
- * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
- */
-
-#include <strstream.h>
-#include <string.h>
-#include <stdio.h>
-#include "zlib.h"
-
-#if defined(_WIN32)
-#   include <fcntl.h>
-#   include <io.h>
-#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-#   define SET_BINARY_MODE(file)
-#endif
-
-class zstringlen {
-public:
-    zstringlen(class izstream&);
-    zstringlen(class ozstream&, const char*);
-    size_t value() const { return val.word; }
-private:
-    struct Val { unsigned char byte; size_t word; } val;
-};
-
-//  ----------------------------- izstream -----------------------------
-
-class izstream
-{
-    public:
-        izstream() : m_fp(0) {}
-        izstream(FILE* fp) : m_fp(0) { open(fp); }
-        izstream(const char* name) : m_fp(0) { open(name); }
-        ~izstream() { close(); }
-
-        /* Opens a gzip (.gz) file for reading.
-         * open() can be used to read a file which is not in gzip format;
-         * in this case read() will directly read from the file without
-         * decompression. errno can be checked to distinguish two error
-         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
-         */
-        void open(const char* name) {
-            if (m_fp) close();
-            m_fp = ::gzopen(name, "rb");
-        }
-
-        void open(FILE* fp) {
-            SET_BINARY_MODE(fp);
-            if (m_fp) close();
-            m_fp = ::gzdopen(fileno(fp), "rb");
-        }
-
-        /* Flushes all pending input if necessary, closes the compressed file
-         * and deallocates all the (de)compression state. The return value is
-         * the zlib error number (see function error() below).
-         */
-        int close() {
-            int r = ::gzclose(m_fp);
-            m_fp = 0; return r;
-        }
-
-        /* Binary read the given number of bytes from the compressed file.
-         */
-        int read(void* buf, size_t len) {
-            return ::gzread(m_fp, buf, len);
-        }
-
-        /* Returns the error message for the last error which occurred on the
-         * given compressed file. errnum is set to zlib error number. If an
-         * error occurred in the file system and not in the compression library,
-         * errnum is set to Z_ERRNO and the application may consult errno
-         * to get the exact error code.
-         */
-        const char* error(int* errnum) {
-            return ::gzerror(m_fp, errnum);
-        }
-
-        gzFile fp() { return m_fp; }
-
-    private:
-        gzFile m_fp;
-};
-
-/*
- * Binary read the given (array of) object(s) from the compressed file.
- * If the input file was not in gzip format, read() copies the objects number
- * of bytes into the buffer.
- * returns the number of uncompressed bytes actually read
- * (0 for end of file, -1 for error).
- */
-template <class T, class Items>
-inline int read(izstream& zs, T* x, Items items) {
-    return ::gzread(zs.fp(), x, items*sizeof(T));
-}
-
-/*
- * Binary input with the '>' operator.
- */
-template <class T>
-inline izstream& operator>(izstream& zs, T& x) {
-    ::gzread(zs.fp(), &x, sizeof(T));
-    return zs;
-}
-
-
-inline zstringlen::zstringlen(izstream& zs) {
-    zs > val.byte;
-    if (val.byte == 255) zs > val.word;
-    else val.word = val.byte;
-}
-
-/*
- * Read length of string + the string with the '>' operator.
- */
-inline izstream& operator>(izstream& zs, char* x) {
-    zstringlen len(zs);
-    ::gzread(zs.fp(), x, len.value());
-    x[len.value()] = '\0';
-    return zs;
-}
-
-inline char* read_string(izstream& zs) {
-    zstringlen len(zs);
-    char* x = new char[len.value()+1];
-    ::gzread(zs.fp(), x, len.value());
-    x[len.value()] = '\0';
-    return x;
-}
-
-// ----------------------------- ozstream -----------------------------
-
-class ozstream
-{
-    public:
-        ozstream() : m_fp(0), m_os(0) {
-        }
-        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
-            : m_fp(0), m_os(0) {
-            open(fp, level);
-        }
-        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
-            : m_fp(0), m_os(0) {
-            open(name, level);
-        }
-        ~ozstream() {
-            close();
-        }
-
-        /* Opens a gzip (.gz) file for writing.
-         * The compression level parameter should be in 0..9
-         * errno can be checked to distinguish two error cases
-         * (if errno is zero, the zlib error is Z_MEM_ERROR).
-         */
-        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
-            char mode[4] = "wb\0";
-            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
-            if (m_fp) close();
-            m_fp = ::gzopen(name, mode);
-        }
-
-        /* open from a FILE pointer.
-         */
-        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
-            SET_BINARY_MODE(fp);
-            char mode[4] = "wb\0";
-            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
-            if (m_fp) close();
-            m_fp = ::gzdopen(fileno(fp), mode);
-        }
-
-        /* Flushes all pending output if necessary, closes the compressed file
-         * and deallocates all the (de)compression state. The return value is
-         * the zlib error number (see function error() below).
-         */
-        int close() {
-            if (m_os) {
-                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
-                delete[] m_os->str(); delete m_os; m_os = 0;
-            }
-            int r = ::gzclose(m_fp); m_fp = 0; return r;
-        }
-
-        /* Binary write the given number of bytes into the compressed file.
-         */
-        int write(const void* buf, size_t len) {
-            return ::gzwrite(m_fp, (voidp) buf, len);
-        }
-
-        /* Flushes all pending output into the compressed file. The parameter
-         * _flush is as in the deflate() function. The return value is the zlib
-         * error number (see function gzerror below). flush() returns Z_OK if
-         * the flush_ parameter is Z_FINISH and all output could be flushed.
-         * flush() should be called only when strictly necessary because it can
-         * degrade compression.
-         */
-        int flush(int _flush) {
-            os_flush();
-            return ::gzflush(m_fp, _flush);
-        }
-
-        /* Returns the error message for the last error which occurred on the
-         * given compressed file. errnum is set to zlib error number. If an
-         * error occurred in the file system and not in the compression library,
-         * errnum is set to Z_ERRNO and the application may consult errno
-         * to get the exact error code.
-         */
-        const char* error(int* errnum) {
-            return ::gzerror(m_fp, errnum);
-        }
-
-        gzFile fp() { return m_fp; }
-
-        ostream& os() {
-            if (m_os == 0) m_os = new ostrstream;
-            return *m_os;
-        }
-
-        void os_flush() {
-            if (m_os && m_os->pcount()>0) {
-                ostrstream* oss = new ostrstream;
-                oss->fill(m_os->fill());
-                oss->flags(m_os->flags());
-                oss->precision(m_os->precision());
-                oss->width(m_os->width());
-                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
-                delete[] m_os->str(); delete m_os; m_os = oss;
-            }
-        }
-
-    private:
-        gzFile m_fp;
-        ostrstream* m_os;
-};
-
-/*
- * Binary write the given (array of) object(s) into the compressed file.
- * returns the number of uncompressed bytes actually written
- * (0 in case of error).
- */
-template <class T, class Items>
-inline int write(ozstream& zs, const T* x, Items items) {
-    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
-}
-
-/*
- * Binary output with the '<' operator.
- */
-template <class T>
-inline ozstream& operator<(ozstream& zs, const T& x) {
-    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
-    return zs;
-}
-
-inline zstringlen::zstringlen(ozstream& zs, const char* x) {
-    val.byte = 255;  val.word = ::strlen(x);
-    if (val.word < 255) zs < (val.byte = val.word);
-    else zs < val;
-}
-
-/*
- * Write length of string + the string with the '<' operator.
- */
-inline ozstream& operator<(ozstream& zs, const char* x) {
-    zstringlen len(zs, x);
-    ::gzwrite(zs.fp(), (voidp) x, len.value());
-    return zs;
-}
-
-#ifdef _MSC_VER
-inline ozstream& operator<(ozstream& zs, char* const& x) {
-    return zs < (const char*) x;
-}
-#endif
-
-/*
- * Ascii write with the << operator;
- */
-template <class T>
-inline ostream& operator<<(ozstream& zs, const T& x) {
-    zs.os_flush();
-    return zs.os() << x;
-}
-
-#endif
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.  Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+    zstringlen(class izstream&);
+    zstringlen(class ozstream&, const char*);
+    size_t value() const { return val.word; }
+private:
+    struct Val { unsigned char byte; size_t word; } val;
+};
+
+//  ----------------------------- izstream -----------------------------
+
+class izstream
+{
+    public:
+        izstream() : m_fp(0) {}
+        izstream(FILE* fp) : m_fp(0) { open(fp); }
+        izstream(const char* name) : m_fp(0) { open(name); }
+        ~izstream() { close(); }
+
+        /* Opens a gzip (.gz) file for reading.
+         * open() can be used to read a file which is not in gzip format;
+         * in this case read() will directly read from the file without
+         * decompression. errno can be checked to distinguish two error
+         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name) {
+            if (m_fp) close();
+            m_fp = ::gzopen(name, "rb");
+        }
+
+        void open(FILE* fp) {
+            SET_BINARY_MODE(fp);
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), "rb");
+        }
+
+        /* Flushes all pending input if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            int r = ::gzclose(m_fp);
+            m_fp = 0; return r;
+        }
+
+        /* Binary read the given number of bytes from the compressed file.
+         */
+        int read(void* buf, size_t len) {
+            return ::gzread(m_fp, buf, len);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+    private:
+        gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+    return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+    ::gzread(zs.fp(), &x, sizeof(T));
+    return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+    zs > val.byte;
+    if (val.byte == 255) zs > val.word;
+    else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+    zstringlen len(zs);
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return zs;
+}
+
+inline char* read_string(izstream& zs) {
+    zstringlen len(zs);
+    char* x = new char[len.value()+1];
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+    public:
+        ozstream() : m_fp(0), m_os(0) {
+        }
+        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(fp, level);
+        }
+        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(name, level);
+        }
+        ~ozstream() {
+            close();
+        }
+
+        /* Opens a gzip (.gz) file for writing.
+         * The compression level parameter should be in 0..9
+         * errno can be checked to distinguish two error cases
+         * (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzopen(name, mode);
+        }
+
+        /* open from a FILE pointer.
+         */
+        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+            SET_BINARY_MODE(fp);
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), mode);
+        }
+
+        /* Flushes all pending output if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            if (m_os) {
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = 0;
+            }
+            int r = ::gzclose(m_fp); m_fp = 0; return r;
+        }
+
+        /* Binary write the given number of bytes into the compressed file.
+         */
+        int write(const void* buf, size_t len) {
+            return ::gzwrite(m_fp, (voidp) buf, len);
+        }
+
+        /* Flushes all pending output into the compressed file. The parameter
+         * _flush is as in the deflate() function. The return value is the zlib
+         * error number (see function gzerror below). flush() returns Z_OK if
+         * the flush_ parameter is Z_FINISH and all output could be flushed.
+         * flush() should be called only when strictly necessary because it can
+         * degrade compression.
+         */
+        int flush(int _flush) {
+            os_flush();
+            return ::gzflush(m_fp, _flush);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+        ostream& os() {
+            if (m_os == 0) m_os = new ostrstream;
+            return *m_os;
+        }
+
+        void os_flush() {
+            if (m_os && m_os->pcount()>0) {
+                ostrstream* oss = new ostrstream;
+                oss->fill(m_os->fill());
+                oss->flags(m_os->flags());
+                oss->precision(m_os->precision());
+                oss->width(m_os->width());
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = oss;
+            }
+        }
+
+    private:
+        gzFile m_fp;
+        ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+    return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+    val.byte = 255;  val.word = ::strlen(x);
+    if (val.word < 255) zs < (val.byte = val.word);
+    else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+    zstringlen len(zs, x);
+    ::gzwrite(zs.fp(), (voidp) x, len.value());
+    return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+    return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+    zs.os_flush();
+    return zs.os() << x;
+}
+
+#endif

package/vendor/zlib/contrib/iostream2/zstream_test.cpp

@@ -1,25 +1,25 @@
-#include "zstream.h"
-#include <math.h>
-#include <stdlib.h>
-#include <iomanip.h>
-
-void main() {
-    char h[256] = "Hello";
-    char* g = "Goodbye";
-    ozstream out("temp.gz");
-    out < "This works well" < h < g;
-    out.close();
-
-    izstream in("temp.gz"); // read it back
-    char *x = read_string(in), *y = new char[256], z[256];
-    in > y > z;
-    in.close();
-    cout << x << endl << y << endl << z << endl;
-
-    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
-    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
-    out << z << endl << y << endl << x << endl;
-    out << 1.1234567890123456789 << endl;
-
-    delete[] x; delete[] y;
-}
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+    char h[256] = "Hello";
+    char* g = "Goodbye";
+    ozstream out("temp.gz");
+    out < "This works well" < h < g;
+    out.close();
+
+    izstream in("temp.gz"); // read it back
+    char *x = read_string(in), *y = new char[256], z[256];
+    in > y > z;
+    in.close();
+    cout << x << endl << y << endl << z << endl;
+
+    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+    out << z << endl << y << endl << x << endl;
+    out << 1.1234567890123456789 << endl;
+
+    delete[] x; delete[] y;
+}