hane 1.1.1 → 1.2.0

package/vendor/zlib/examples/zran.h

@@ -1,53 +1,53 @@
-/* zran.h -- example of deflated stream indexing and random access
- * Copyright (C) 2005, 2012, 2018, 2023, 2024 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- * Version 1.5  4 Feb 2024  Mark Adler */
-
-#include <stdio.h>
-#include "zlib.h"
-
-// Access point.
-typedef struct point {
-    off_t out;          // offset in uncompressed data
-    off_t in;           // offset in compressed file of first full byte
-    int bits;           // 0, or number of bits (1-7) from byte at in-1
-    unsigned dict;      // number of bytes in window to use as a dictionary
-    unsigned char *window;  // preceding 32K (or less) of uncompressed data
-} point_t;
-
-// Access point list.
-struct deflate_index {
-    int have;           // number of access points in list
-    int mode;           // -15 for raw, 15 for zlib, or 31 for gzip
-    off_t length;       // total length of uncompressed data
-    point_t *list;      // allocated list of access points
-    z_stream strm;      // re-usable inflate engine for extraction
-};
-
-// Make one pass through a zlib, gzip, or raw deflate compressed stream and
-// build an index, with access points about every span bytes of uncompressed
-// output. gzip files with multiple members are fully indexed. span should be
-// chosen to balance the speed of random access against the memory requirements
-// of the list, which is about 32K bytes per access point. The return value is
-// the number of access points on success (>= 1), Z_MEM_ERROR for out of
-// memory, Z_BUF_ERROR for a premature end of input, Z_DATA_ERROR for a format
-// or verification error in the input file, or Z_ERRNO for a file read error.
-// On success, *built points to the resulting index, otherwise it's NULL.
-int deflate_index_build(FILE *in, off_t span, struct deflate_index **built);
-
-// Use the index to read len bytes from offset into buf. Return the number of
-// bytes read or a negative error code. If data is requested past the end of
-// the uncompressed data, then deflate_index_extract() will return a value less
-// than len, indicating how much was actually read into buf. If given a valid
-// index, this function should not return an error unless the file was modified
-// somehow since the index was generated, given that deflate_index_build() had
-// validated all of the input. If nevertheless there is a failure, Z_BUF_ERROR
-// is returned if the compressed data ends prematurely, Z_DATA_ERROR if the
-// deflate compressed data is not valid, Z_MEM_ERROR if out of memory,
-// Z_STREAM_ERROR if the index is not valid, or Z_ERRNO if there is an error
-// reading or seeking on the input file.
-ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
-                                off_t offset, unsigned char *buf, size_t len);
-
-// Deallocate an index built by deflate_index_build().
-void deflate_index_free(struct deflate_index *index);
+/* zran.h -- example of deflated stream indexing and random access
+ * Copyright (C) 2005, 2012, 2018, 2023, 2024 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ * Version 1.5  4 Feb 2024  Mark Adler */
+
+#include <stdio.h>
+#include "zlib.h"
+
+// Access point.
+typedef struct point {
+    off_t out;          // offset in uncompressed data
+    off_t in;           // offset in compressed file of first full byte
+    int bits;           // 0, or number of bits (1-7) from byte at in-1
+    unsigned dict;      // number of bytes in window to use as a dictionary
+    unsigned char *window;  // preceding 32K (or less) of uncompressed data
+} point_t;
+
+// Access point list.
+struct deflate_index {
+    int have;           // number of access points in list
+    int mode;           // -15 for raw, 15 for zlib, or 31 for gzip
+    off_t length;       // total length of uncompressed data
+    point_t *list;      // allocated list of access points
+    z_stream strm;      // re-usable inflate engine for extraction
+};
+
+// Make one pass through a zlib, gzip, or raw deflate compressed stream and
+// build an index, with access points about every span bytes of uncompressed
+// output. gzip files with multiple members are fully indexed. span should be
+// chosen to balance the speed of random access against the memory requirements
+// of the list, which is about 32K bytes per access point. The return value is
+// the number of access points on success (>= 1), Z_MEM_ERROR for out of
+// memory, Z_BUF_ERROR for a premature end of input, Z_DATA_ERROR for a format
+// or verification error in the input file, or Z_ERRNO for a file read error.
+// On success, *built points to the resulting index, otherwise it's NULL.
+int deflate_index_build(FILE *in, off_t span, struct deflate_index **built);
+
+// Use the index to read len bytes from offset into buf. Return the number of
+// bytes read or a negative error code. If data is requested past the end of
+// the uncompressed data, then deflate_index_extract() will return a value less
+// than len, indicating how much was actually read into buf. If given a valid
+// index, this function should not return an error unless the file was modified
+// somehow since the index was generated, given that deflate_index_build() had
+// validated all of the input. If nevertheless there is a failure, Z_BUF_ERROR
+// is returned if the compressed data ends prematurely, Z_DATA_ERROR if the
+// deflate compressed data is not valid, Z_MEM_ERROR if out of memory,
+// Z_STREAM_ERROR if the index is not valid, or Z_ERRNO if there is an error
+// reading or seeking on the input file.
+ptrdiff_t deflate_index_extract(FILE *in, struct deflate_index *index,
+                                off_t offset, unsigned char *buf, size_t len);
+
+// Deallocate an index built by deflate_index_build().
+void deflate_index_free(struct deflate_index *index);

package/vendor/zlib/gzclose.c

@@ -1,23 +1,23 @@
-/* gzclose.c -- zlib gzclose() function
- * Copyright (C) 2004, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* gzclose() is in a separate file so that it is linked in only if it is used.
-   That way the other gzclose functions can be used instead to avoid linking in
-   unneeded compression or decompression routines. */
-int ZEXPORT gzclose(gzFile file) {
-#ifndef NO_GZCOMPRESS
-    gz_statep state;
-
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
-#else
-    return gzclose_r(file);
-#endif
-}
+/* gzclose.c -- zlib gzclose() function
+ * Copyright (C) 2004, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* gzclose() is in a separate file so that it is linked in only if it is used.
+   That way the other gzclose functions can be used instead to avoid linking in
+   unneeded compression or decompression routines. */
+int ZEXPORT gzclose(gzFile file) {
+#ifndef NO_GZCOMPRESS
+    gz_statep state;
+
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    return state->mode == GZ_READ ? gzclose_r(file) : gzclose_w(file);
+#else
+    return gzclose_r(file);
+#endif
+}

package/vendor/zlib/gzguts.h

@@ -1,215 +1,215 @@
-/* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004-2024 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#ifdef _LARGEFILE64_SOURCE
-#  ifndef _LARGEFILE_SOURCE
-#    define _LARGEFILE_SOURCE 1
-#  endif
-#  undef _FILE_OFFSET_BITS
-#  undef _TIME_BITS
-#endif
-
-#ifdef HAVE_HIDDEN
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
-
-#if defined(_WIN32)
-#  ifndef WIN32_LEAN_AND_MEAN
-#    define WIN32_LEAN_AND_MEAN
-#  endif
-#  ifndef _CRT_SECURE_NO_WARNINGS
-#    define _CRT_SECURE_NO_WARNINGS
-#  endif
-#  ifndef _CRT_NONSTDC_NO_DEPRECATE
-#    define _CRT_NONSTDC_NO_DEPRECATE
-#  endif
-#endif
-
-#include <stdio.h>
-#include "zlib.h"
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#  include <limits.h>
-#endif
-
-#ifndef _POSIX_C_SOURCE
-#  define _POSIX_C_SOURCE 200112L
-#endif
-#include <fcntl.h>
-
-#ifdef _WIN32
-#  include <stddef.h>
-#endif
-
-#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
-#  include <io.h>
-#  include <sys/stat.h>
-#endif
-
-#if defined(_WIN32) && !defined(WIDECHAR)
-#  define WIDECHAR
-#endif
-
-#ifdef NO_DEFLATE       /* for compatibility with old definition */
-#  define NO_GZCOMPRESS
-#endif
-
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#if defined(__CYGWIN__)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-
-#ifndef HAVE_VSNPRINTF
-#  if !defined(NO_vsnprintf) && \
-      (defined(MSDOS) || defined(__TURBOC__) || defined(__SASC) || \
-       defined(VMS) || defined(__OS400) || defined(__MVS__))
-/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
-   but for now we just assume it doesn't. */
-#    define NO_vsnprintf
-#  endif
-#  ifdef WIN32
-/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-#    if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#      ifndef vsnprintf
-#        define vsnprintf _vsnprintf
-#      endif
-#    endif
-#  elif !defined(__STDC_VERSION__) || __STDC_VERSION__-0 < 199901L
-/* Otherwise if C89/90, assume no C99 snprintf() or vsnprintf() */
-#    ifndef NO_snprintf
-#      define NO_snprintf
-#    endif
-#    ifndef NO_vsnprintf
-#      define NO_vsnprintf
-#    endif
-#  endif
-#endif
-
-/* unlike snprintf (which is required in C99), _snprintf does not guarantee
-   null termination of the result -- however this is only used in gzlib.c where
-   the result is assured to fit in the space provided */
-#if defined(_MSC_VER) && _MSC_VER < 1900
-#  define snprintf _snprintf
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* since "static" is used to mean two completely different things in C, we
-   define "local" for the non-static meaning of "static", for readability
-   (compile with -Dlocal if your debugger can't find static symbols) */
-
-/* gz* functions always use library allocation functions */
-#ifndef STDC
-  extern voidp  malloc(uInt size);
-  extern void   free(voidpf ptr);
-#endif
-
-/* get errno and strerror definition */
-#if defined UNDER_CE
-#  include <windows.h>
-#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
-#else
-#  ifndef NO_STRERROR
-#    include <errno.h>
-#    define zstrerror() strerror(errno)
-#  else
-#    define zstrerror() "stdio error (consult errno)"
-#  endif
-#endif
-
-/* provide prototypes for these when building zlib without LFS */
-#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-    ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
-    ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
-    ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
-    ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
-#endif
-
-/* default memLevel */
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-
-/* default i/o buffer size -- double this for output when reading (this and
-   twice this must be able to fit in an unsigned type) */
-#define GZBUFSIZE 8192
-
-/* gzip modes, also provide a little integrity check on the passed structure */
-#define GZ_NONE 0
-#define GZ_READ 7247
-#define GZ_WRITE 31153
-#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
-
-/* values for gz_state how */
-#define LOOK 0      /* look for a gzip header */
-#define COPY 1      /* copy input directly */
-#define GZIP 2      /* decompress a gzip stream */
-
-/* internal gzip file state data structure */
-typedef struct {
-        /* exposed contents for gzgetc() macro */
-    struct gzFile_s x;      /* "x" for exposed */
-                            /* x.have: number of bytes available at x.next */
-                            /* x.next: next output data to deliver or write */
-                            /* x.pos: current position in uncompressed data */
-        /* used for both reading and writing */
-    int mode;               /* see gzip modes above */
-    int fd;                 /* file descriptor */
-    char *path;             /* path or fd for error messages */
-    unsigned size;          /* buffer size, zero if not allocated yet */
-    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
-    unsigned char *in;      /* input buffer (double-sized when writing) */
-    unsigned char *out;     /* output buffer (double-sized when reading) */
-    int direct;             /* 0 if processing gzip, 1 if transparent */
-        /* just for reading */
-    int how;                /* 0: get header, 1: copy, 2: decompress */
-    z_off64_t start;        /* where the gzip data started, for rewinding */
-    int eof;                /* true if end of input file reached */
-    int past;               /* true if read requested past end */
-        /* just for writing */
-    int level;              /* compression level */
-    int strategy;           /* compression strategy */
-    int reset;              /* true if a reset is pending after a Z_FINISH */
-        /* seek request */
-    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
-    int seek;               /* true if seek request pending */
-        /* error information */
-    int err;                /* error code */
-    char *msg;              /* error message */
-        /* zlib inflate or deflate stream */
-    z_stream strm;          /* stream structure in-place (not a pointer) */
-} gz_state;
-typedef gz_state FAR *gz_statep;
-
-/* shared functions */
-void ZLIB_INTERNAL gz_error(gz_statep, int, const char *);
-#if defined UNDER_CE
-char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
-#endif
-
-/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
-   value -- needed when comparing unsigned to z_off64_t, which is signed
-   (possible z_off64_t types off_t, off64_t, and long are all signed) */
-unsigned ZLIB_INTERNAL gz_intmax(void);
-#define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004-2024 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+#  ifndef _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE 1
+#  endif
+#  undef _FILE_OFFSET_BITS
+#  undef _TIME_BITS
+#endif
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#if defined(_WIN32)
+#  ifndef WIN32_LEAN_AND_MEAN
+#    define WIN32_LEAN_AND_MEAN
+#  endif
+#  ifndef _CRT_SECURE_NO_WARNINGS
+#    define _CRT_SECURE_NO_WARNINGS
+#  endif
+#  ifndef _CRT_NONSTDC_NO_DEPRECATE
+#    define _CRT_NONSTDC_NO_DEPRECATE
+#  endif
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#  include <limits.h>
+#endif
+
+#ifndef _POSIX_C_SOURCE
+#  define _POSIX_C_SOURCE 200112L
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+#  include <io.h>
+#  include <sys/stat.h>
+#endif
+
+#if defined(_WIN32) && !defined(WIDECHAR)
+#  define WIDECHAR
+#endif
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+#  if !defined(NO_vsnprintf) && \
+      (defined(MSDOS) || defined(__TURBOC__) || defined(__SASC) || \
+       defined(VMS) || defined(__OS400) || defined(__MVS__))
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+   but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#      ifndef vsnprintf
+#        define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  elif !defined(__STDC_VERSION__) || __STDC_VERSION__-0 < 199901L
+/* Otherwise if C89/90, assume no C99 snprintf() or vsnprintf() */
+#    ifndef NO_snprintf
+#      define NO_snprintf
+#    endif
+#    ifndef NO_vsnprintf
+#      define NO_vsnprintf
+#    endif
+#  endif
+#endif
+
+/* unlike snprintf (which is required in C99), _snprintf does not guarantee
+   null termination of the result -- however this is only used in gzlib.c where
+   the result is assured to fit in the space provided */
+#if defined(_MSC_VER) && _MSC_VER < 1900
+#  define snprintf _snprintf
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+  extern voidp  malloc(uInt size);
+  extern void   free(voidpf ptr);
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+#  include <windows.h>
+#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+#  ifndef NO_STRERROR
+#    include <errno.h>
+#    define zstrerror() strerror(errno)
+#  else
+#    define zstrerror() "stdio error (consult errno)"
+#  endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *);
+    ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int);
+    ZEXTERN z_off64_t ZEXPORT gztell64(gzFile);
+    ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile);
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+   twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0      /* look for a gzip header */
+#define COPY 1      /* copy input directly */
+#define GZIP 2      /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+        /* exposed contents for gzgetc() macro */
+    struct gzFile_s x;      /* "x" for exposed */
+                            /* x.have: number of bytes available at x.next */
+                            /* x.next: next output data to deliver or write */
+                            /* x.pos: current position in uncompressed data */
+        /* used for both reading and writing */
+    int mode;               /* see gzip modes above */
+    int fd;                 /* file descriptor */
+    char *path;             /* path or fd for error messages */
+    unsigned size;          /* buffer size, zero if not allocated yet */
+    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
+    unsigned char *in;      /* input buffer (double-sized when writing) */
+    unsigned char *out;     /* output buffer (double-sized when reading) */
+    int direct;             /* 0 if processing gzip, 1 if transparent */
+        /* just for reading */
+    int how;                /* 0: get header, 1: copy, 2: decompress */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    int eof;                /* true if end of input file reached */
+    int past;               /* true if read requested past end */
+        /* just for writing */
+    int level;              /* compression level */
+    int strategy;           /* compression strategy */
+    int reset;              /* true if a reset is pending after a Z_FINISH */
+        /* seek request */
+    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
+    int seek;               /* true if seek request pending */
+        /* error information */
+    int err;                /* error code */
+    char *msg;              /* error message */
+        /* zlib inflate or deflate stream */
+    z_stream strm;          /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error(gz_statep, int, const char *);
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror(DWORD error);
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+   value -- needed when comparing unsigned to z_off64_t, which is signed
+   (possible z_off64_t types off_t, off64_t, and long are all signed) */
+unsigned ZLIB_INTERNAL gz_intmax(void);
+#define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())