foris 6.7.2 → 6.8.0-beta.b24aa684

package/translations/nb_NO/LC_MESSAGES/forisjs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
 "PO-Revision-Date: 2023-03-02 11:40+0000\n"
 "Last-Translator: Allan Nordhøy <epost@anotheragency.no>\n"
 "Language: nb_NO\n"
@@ -37,7 +37,7 @@ msgid "An unknown API error occurred."
 msgstr "Ukjent API-feil."
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr ""
 
@@ -187,7 +187,7 @@ msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:186
 #, fuzzy
-msgid "802.11n/ac/ax mode"
+msgid "802.11n/ac/ax/be mode"
 msgstr "802.11n/ac mode"
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -226,17 +226,17 @@ msgstr "Tilpasset"
 msgid "Enable Guest Wi-Fi"
 msgstr "Skru på gjestetrådløsnett"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 #, fuzzy
 msgid "Show QR code"
 msgstr "QR-kode for Wi-Fi"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr "QR-kode for Wi-Fi"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr "Last ned PDF"
 
@@ -326,38 +326,66 @@ msgstr "802.11ac - 80 MHz vid kanal"
 msgid "802.11ax - 160 MHz wide channel"
 msgstr "802.11ac - 80 MHz vid kanal"
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+#, fuzzy
+msgid "802.11be - 20 MHz wide channel"
+msgstr "802.11n - 20 MHz vid kanal"
+
+#: src/common/WiFiSettings/constants.js:23
+#, fuzzy
+msgid "802.11be - 40 MHz wide channel"
+msgstr "802.11n - 40 MHz vid kanal"
+
+#: src/common/WiFiSettings/constants.js:24
+#, fuzzy
+msgid "802.11be - 80 MHz wide channel"
+msgstr "802.11ac - 80 MHz vid kanal"
+
+#: src/common/WiFiSettings/constants.js:25
+#, fuzzy
+msgid "802.11be - 160 MHz wide channel"
+msgstr "802.11ac - 80 MHz vid kanal"
+
+#: src/common/WiFiSettings/constants.js:26
+#, fuzzy
+msgid "802.11be - 320 MHz wide channel"
+msgstr "802.11n - 20 MHz vid kanal"
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr "Kun WPA3"
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr "WPA3 med WPA2 som tilbakefall (forvalg)"
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr "Kun WPA2"
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
 msgstr "SSID som inneholder uvanlige tegn kan forårsake problemer på noen enheter."
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr "WPA2/3 med forhåndsdelt nøkkel, (som kreves for å koble til nettverket)."
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr "Skjuler nettverket fra nettverkslister."
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
+#, fuzzy
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 "2.4 GHz-båndet støttes av flere klienter, men har vanligvis flere "
 "forstyrrelser. 5 Ghz-båndet er en nyere standard,\n"
@@ -365,19 +393,19 @@ msgstr ""
 "forstyrrelse,\n"
 "men signalet er mer utsatt for hindringer innendørs."
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
+#, fuzzy
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 "Endringer her justerer 802.11n/ac/ax-modus. 802.11.n med 40 Mhz brede "
 "kanaler kan gi høyere gjennomstrømming,\n"
 "men kan forårsake mer forstyrrelse i nettverket. Hvis du ikke vet hva du "
 "skal velge, bruk forvalget på 20 MHz brede kanaler."
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -391,12 +419,14 @@ msgstr ""
 "ruteren.\n"
 "Parametere for gjestenettverket kan settes i gjestenettverksfanen."
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
+#, fuzzy
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 "WPA3-standarden er den nye mest sikre krypteringsmetoden som anbefales "
 "for alle enheter som støtter den.\n"
@@ -411,16 +441,17 @@ msgstr "Innstillinger lagret"
 msgid "Changes you made may not be saved. Are you sure you want to leave?"
 msgstr "Endringer du har gjort vil ikke bli lagret. Er du sikker?"
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 #, fuzzy
 msgid "Updating"
 msgstr "Oppdaterer"
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+#, fuzzy
+msgid "Loading"
 msgstr "Last inn innstillinger"
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr "Lagre"
 

package/translations/nl/LC_MESSAGES/forisjs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
 "PO-Revision-Date: 2024-01-04 21:08+0000\n"
 "Last-Translator: powerburner-nl <peter.mulder.1981@gmail.com>\n"
 "Language: nl\n"
@@ -36,7 +36,7 @@ msgid "An unknown API error occurred."
 msgstr ""
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr ""
 
@@ -180,7 +180,7 @@ msgid "Band"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+msgid "802.11n/ac/ax/be mode"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -215,16 +215,16 @@ msgstr "auto"
 msgid "Enable Guest Wi-Fi"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr ""
 
@@ -305,49 +305,70 @@ msgstr ""
 msgid "802.11ax - 160 MHz wide channel"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+msgid "802.11be - 20 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:23
+msgid "802.11be - 40 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:24
+msgid "802.11be - 80 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:25
+msgid "802.11be - 160 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:26
+msgid "802.11be - 320 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -356,12 +377,13 @@ msgid ""
 "tab."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 
 #: src/form/components/ForisForm.js:121
@@ -372,15 +394,16 @@ msgstr ""
 msgid "Changes you made may not be saved. Are you sure you want to leave?"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr "Bijwerken"
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+#, fuzzy
+msgid "Loading"
 msgstr "Instellingen laden"
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr "Opslaan"
 
@@ -523,3 +546,39 @@ msgstr "Bevat geen lijst met e-mails gescheiden door komma's."
 #~ msgid "Are you sure you want to restart the router?"
 #~ msgstr "Weet u zeker dat u de router opnieuw wilt opstarten?"
 
+#~ msgid "802.11n/ac/ax mode"
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The 2.4 GHz band is more widely"
+#~ " supported by clients, but tends to"
+#~ " have more interference. The 5 GHz"
+#~ " band is a newer standard and "
+#~ "may not be supported by all your"
+#~ " devices. It usually has less "
+#~ "interference, but the signal does not"
+#~ " carry so well indoors."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "Change this to adjust 802.11n/ac/ax mode"
+#~ " of operation. 802.11n with 40 MHz"
+#~ " wide channels can yield higher "
+#~ "throughput but can cause more "
+#~ "interference in the network. If you "
+#~ "don't know what to choose, use the"
+#~ " default option with 20 MHz wide "
+#~ "channel."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The WPA3 standard is the new most"
+#~ " secure encryption method that is "
+#~ "suggested to be used with any "
+#~ "device that supports it. The older "
+#~ "devices without WPA3 support require "
+#~ "older WPA2. If you experience issues "
+#~ "with connecting older devices, try to"
+#~ " enable WPA2."
+#~ msgstr ""
+

package/translations/pl/LC_MESSAGES/forisjs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
 "PO-Revision-Date: 2023-03-07 16:37+0000\n"
 "Last-Translator: Arusekk <arek_koz@o2.pl>\n"
 "Language: pl\n"
@@ -37,7 +37,7 @@ msgid "An unknown API error occurred."
 msgstr "Wystąpił nieznany błąd API."
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr ""
 
@@ -182,7 +182,7 @@ msgid "Band"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+msgid "802.11n/ac/ax/be mode"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -216,16 +216,16 @@ msgstr "Własny"
 msgid "Enable Guest Wi-Fi"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr ""
 
@@ -306,49 +306,70 @@ msgstr ""
 msgid "802.11ax - 160 MHz wide channel"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+msgid "802.11be - 20 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:23
+msgid "802.11be - 40 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:24
+msgid "802.11be - 80 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:25
+msgid "802.11be - 160 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:26
+msgid "802.11be - 320 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -357,12 +378,13 @@ msgid ""
 "tab."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 
 #: src/form/components/ForisForm.js:121
@@ -375,15 +397,16 @@ msgstr ""
 "Wprowadzone zmiany mogą nie zostać zapisane. Jesteś pewny, że chcesz "
 "wyjść?"
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr "Aktualizacja"
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+#, fuzzy
+msgid "Loading"
 msgstr "Wczytaj ustawienia"
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr "Zapisz"
 
@@ -523,3 +546,39 @@ msgstr "Nie zawiera listy e-maili oddzielonych przecinkami."
 #~ msgid "Are you sure you want to restart the router?"
 #~ msgstr "Czy na pewno zrestartować router?"
 
+#~ msgid "802.11n/ac/ax mode"
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The 2.4 GHz band is more widely"
+#~ " supported by clients, but tends to"
+#~ " have more interference. The 5 GHz"
+#~ " band is a newer standard and "
+#~ "may not be supported by all your"
+#~ " devices. It usually has less "
+#~ "interference, but the signal does not"
+#~ " carry so well indoors."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "Change this to adjust 802.11n/ac/ax mode"
+#~ " of operation. 802.11n with 40 MHz"
+#~ " wide channels can yield higher "
+#~ "throughput but can cause more "
+#~ "interference in the network. If you "
+#~ "don't know what to choose, use the"
+#~ " default option with 20 MHz wide "
+#~ "channel."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The WPA3 standard is the new most"
+#~ " secure encryption method that is "
+#~ "suggested to be used with any "
+#~ "device that supports it. The older "
+#~ "devices without WPA3 support require "
+#~ "older WPA2. If you experience issues "
+#~ "with connecting older devices, try to"
+#~ " enable WPA2."
+#~ msgstr ""
+