foris 6.7.2 → 6.8.0-beta.b24aa684

package/common/WiFiSettings/WiFiForm.js

@@ -183,7 +183,7 @@ function DeviceForm({
                     />
 
                     <Select
-                        label={_("802.11n/ac/ax mode")}
+                        label={_("802.11n/ac/ax/be mode")}
                         choices={getHtmodeChoices(formData)}
                         value={formData.htmode}
                         helpText={HELP_TEXTS.htmode}

package/common/WiFiSettings/constants.js

@@ -19,6 +19,11 @@ export const HTMODES = {
     HE80: _("802.11ax - 80 MHz wide channel"),
     HE80_80: _("802.11ax - 80+80 MHz wide channel"),
     HE160: _("802.11ax - 160 MHz wide channel"),
+    EHT20: _("802.11be - 20 MHz wide channel"),
+    EHT40: _("802.11be - 40 MHz wide channel"),
+    EHT80: _("802.11be - 80 MHz wide channel"),
+    EHT160: _("802.11be - 160 MHz wide channel"),
+    EHT320: _("802.11be - 320 MHz wide channel"),
 };
 export const BANDS = {
     "2g": "2.4",
@@ -41,15 +46,15 @@ export const HELP_TEXTS = {
         "If set, network is not visible when scanning for available networks."
     ),
     band: _(
-        "The 2.4 GHz band is more widely supported by clients, but tends to have more interference. The 5 GHz band is a newer standard and may not be supported by all your devices. It usually has less interference, but the signal does not carry so well indoors."
+        "The 2.4 GHz band is more widely supported by clients, but tends to have more interference. The 5 GHz band is a newer standard and may not be supported by all your devices. It usually has less interference, but the signal does not carry so well indoors. The 6 GHz band is an even newer standard and is currently supported only by a limited set of devices. As it is not widely used now, it has only very little interference."
     ),
     htmode: _(
-        "Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 MHz wide channels can yield higher throughput but can cause more interference in the network. If you don't know what to choose, use the default option with 20 MHz wide channel."
+        "Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels can yield higher throughput but can cause more interference in the network. If you don't know what to choose, use the default option."
     ),
     guest_wifi_enabled: _(
         "Enables Wi-Fi for guests, which is separated from LAN network. Devices connected to this network are allowed to access the internet, but aren't allowed to access other devices and the configuration interface of the router. Parameters of the guest network can be set in the Guest network tab."
     ),
     wpa3: _(
-        "The WPA3 standard is the new most secure encryption method that is suggested to be used with any device that supports it. The older devices without WPA3 support require older WPA2. If you experience issues with connecting older devices, try to enable WPA2."
+        "The WPA3 standard is the new most secure encryption method that is suggested to be used with any device that supports it. The older devices without WPA3 support require older WPA2. If you experience issues with connecting older devices, try to enable WPA2. The 6 GHz band supports only WPA3."
     ),
 };

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "foris",
-    "version": "6.7.2",
+    "version": "6.8.0-beta.b24aa684",
     "description": "Foris JS library is a set of components and utils for reForis application and plugins.",
     "author": "CZ.NIC, z.s.p.o.",
     "repository": {
@@ -19,8 +19,8 @@
         "@fortawesome/free-solid-svg-icons": "^6.7.2",
         "@fortawesome/react-fontawesome": "^0.2.2",
         "@tanstack/match-sorter-utils": "^8.19.4",
-        "@tanstack/react-table": "^8.21.2",
-        "axios": "^1.7.9",
+        "@tanstack/react-table": "^8.21.3",
+        "axios": "^1.12.2",
         "immutability-helper": "^3.1.1",
         "moment": "^2.30.1",
         "qrcode.react": "^4.2.0",
@@ -35,24 +35,24 @@
         "react-router-dom": "^5.1.2"
     },
     "devDependencies": {
-        "@babel/cli": "^7.26.4",
-        "@babel/core": "^7.26.9",
-        "@babel/plugin-transform-runtime": "^7.26.9",
-        "@babel/preset-env": "^7.26.9",
-        "@babel/preset-react": "^7.26.3",
+        "@babel/cli": "^7.28.3",
+        "@babel/core": "^7.28.4",
+        "@babel/plugin-transform-runtime": "^7.28.3",
+        "@babel/preset-env": "^7.28.3",
+        "@babel/preset-react": "^7.27.1",
         "@testing-library/react": "^12.1.5",
         "babel-loader": "^9.2.1",
         "babel-polyfill": "^6.26.0",
-        "bootstrap": "^5.3.3",
+        "bootstrap": "^5.3.8",
         "css-loader": "^7.1.2",
         "eslint": "^8.57.0",
         "eslint-config-reforis": "^2.2.1",
         "file-loader": "^6.0.0",
         "jest": "^29.7.0",
         "jest-environment-jsdom": "^29.7.0",
-        "jest-mock-axios": "^4.8.0",
+        "jest-mock-axios": "^4.9.0",
         "moment-timezone": "^0.5.47",
-        "prettier": "^3.5.3",
+        "prettier": "^3.6.2",
         "prop-types": "15.8.1",
         "react": "16.9.0",
         "react-dom": "16.9.0",
@@ -60,7 +60,7 @@
         "react-styleguidist": "^12.0.1",
         "snapshot-diff": "^0.10.0",
         "style-loader": "^4.0.0",
-        "webpack": "^5.98.0"
+        "webpack": "^5.101.3"
     },
     "overrides": {
         "markdown-to-jsx": "^7.7.4"
@@ -74,4 +74,4 @@
         "docs": "npx styleguidist build ",
         "docs:watch": "styleguidist server"
     }
-}
+}

package/translations/cs/LC_MESSAGES/forisjs.po

@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
-"PO-Revision-Date: 2024-11-15 06:01+0000\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
+"PO-Revision-Date: 2025-05-18 10:50+0000\n"
 "Last-Translator: Pavel Borecki <pavel.borecki@gmail.com>\n"
 "Language: cs\n"
 "Language-Team: Czech <https://hosted.weblate.org/projects/turris/foris-"
@@ -36,7 +36,7 @@ msgid "An unknown API error occurred."
 msgstr "Došlo k neznámé chybě v aplikačním programovém rozhraní."
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr "Zavřít"
 
@@ -46,15 +46,15 @@ msgstr "Zkopírováno!"
 
 #: src/bootstrap/CopyInput.js:56
 msgid "Copy"
-msgstr "Kopírovat"
+msgstr "Zkopírovat"
 
 #: src/bootstrap/NumberInput.js:84 src/bootstrap/NumberInput.js:85
 msgid "Increase value. Hint: Hold to increase faster."
-msgstr ""
+msgstr "Zvýšit hodnotu. Tip: Podržte k rychlejšímu zvyšování."
 
 #: src/bootstrap/NumberInput.js:101 src/bootstrap/NumberInput.js:102
 msgid "Decrease value. Hint: Hold to decrease faster."
-msgstr ""
+msgstr "Snížit hodnotu. Tip: Podržte k rychlejšímu snižování."
 
 #: src/common/ActionButtonWithModal/ActionButtonWithModal.js:67
 msgid "Action successful."
@@ -74,19 +74,19 @@ msgstr "Potvrdit"
 
 #: src/common/RichTable/RichTable.js:87
 msgid "Search…"
-msgstr ""
+msgstr "Hledat…"
 
 #: src/common/RichTable/RichTableBody.js:50
 msgid "No results."
-msgstr ""
+msgstr "Žádné výsledky."
 
 #: src/common/RichTable/RichTableColumnsDropdown.js:27
 msgid "Columns"
-msgstr ""
+msgstr "Sloupce"
 
 #: src/common/RichTable/RichTableColumnsDropdown.js:80
 msgid "Reset"
-msgstr ""
+msgstr "Navrátit"
 
 #: src/common/RichTable/RichTableHeader.js:29
 msgid "Sort ascending"
@@ -159,9 +159,9 @@ msgid ""
 "Fi settings. Note that this will remove the current Wi-Fi configuration "
 "and restore the default values."
 msgstr ""
-"Pokud se počet bezdrátových karet neshoduje, můžete zkusit obnovit "
-"nastavení Wi-Fi. Je třeba upozornit, že se tím odstraní stávající "
-"nastavení Wi-Fi a obnoví se výchozí hodnoty."
+"Pokud se počet bezdrátových karet neshoduje, můžete zkusit resetovat "
+"nastavení Wi-Fi. Je třeba upozornit, že tím budou stávající nastavení Wi-"
+"Fi odstraněna a namísto nich vráceny jen výchozí hodnoty."
 
 #: src/common/WiFiSettings/WiFiForm.js:97
 #, python-brace-format
@@ -179,10 +179,11 @@ msgstr "Skrýt SSID"
 
 #: src/common/WiFiSettings/WiFiForm.js:159
 msgid "Band"
-msgstr ""
+msgstr "Pásmo"
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+#, fuzzy
+msgid "802.11n/ac/ax/be mode"
 msgstr "Režim 802.11n/ac/ax"
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -218,16 +219,16 @@ msgstr "Uživatelsky určené"
 msgid "Enable Guest Wi-Fi"
 msgstr "Zapnout Wi-Fi pro hosty"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr "Ukázat QR kód"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
-msgstr "Wi-Fi QR kód"
+msgstr "QR kód k Wi-Fi"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr "Stáhnout PDF"
 
@@ -254,7 +255,7 @@ msgstr "Je třeba, aby heslo obsahovalo alespoň 8 znaků"
 #: src/common/WiFiSettings/WiFiSettings.js:91
 #: src/common/WiFiSettings/WiFiSettings.js:110
 msgid "Password must not contain more than 63 symbols"
-msgstr "Heslo nemůže obsahovat více než 63 znaků"
+msgstr "Heslo nemůže být delší než 63 znaků"
 
 #: src/common/WiFiSettings/constants.js:9
 msgid "Disabled"
@@ -281,9 +282,8 @@ msgid "802.11ac - 80 MHz wide channel"
 msgstr "802.11ac – kanál šíře 80 MHz"
 
 #: src/common/WiFiSettings/constants.js:15
-#, fuzzy
 msgid "802.11ac - 80+80 MHz wide channel"
-msgstr "802.11ac – kanál šíře 80 MHz"
+msgstr "802.11ac – kanál šíře 80+80 MHz"
 
 #: src/common/WiFiSettings/constants.js:16
 msgid "802.11ac - 160 MHz wide channel"
@@ -302,27 +302,51 @@ msgid "802.11ax - 80 MHz wide channel"
 msgstr "802.11ax – kanál šíře 80 MHz"
 
 #: src/common/WiFiSettings/constants.js:20
-#, fuzzy
 msgid "802.11ax - 80+80 MHz wide channel"
-msgstr "802.11ax – kanál šíře 80 MHz"
+msgstr "802.11ax – kanál šíře 80+80 MHz"
 
 #: src/common/WiFiSettings/constants.js:21
 msgid "802.11ax - 160 MHz wide channel"
 msgstr "802.11ax – kanál šíře 160 MHz"
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+#, fuzzy
+msgid "802.11be - 20 MHz wide channel"
+msgstr "802.11n – kanál šíře 20 MHz"
+
+#: src/common/WiFiSettings/constants.js:23
+#, fuzzy
+msgid "802.11be - 40 MHz wide channel"
+msgstr "802.11n – kanál šíře 40 MHz"
+
+#: src/common/WiFiSettings/constants.js:24
+#, fuzzy
+msgid "802.11be - 80 MHz wide channel"
+msgstr "802.11ax – kanál šíře 80 MHz"
+
+#: src/common/WiFiSettings/constants.js:25
+#, fuzzy
+msgid "802.11be - 160 MHz wide channel"
+msgstr "802.11ax – kanál šíře 160 MHz"
+
+#: src/common/WiFiSettings/constants.js:26
+#, fuzzy
+msgid "802.11be - 320 MHz wide channel"
+msgstr "802.11n – kanál šíře 20 MHz"
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr "pouze WPA3"
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr "WPA3, nouzově WPA2 (výchozí)"
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr "pouze WPA2"
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
@@ -330,41 +354,44 @@ msgstr ""
 "SSID obsahující nestandardní znaky může na některých zařízení způsobovat "
 "problémy."
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr "Předsdílený klíč WPA2/3, který je vyžadován pro připojení se k síti."
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 "Při zapnutí této volby se síť nebude zobrazovat zařízením když budou "
 "vyhledávat dostupné sítě."
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
+#, fuzzy
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 "Pásmo 2,4 GHz je v klientských zařízeních podporováno nejčastěji, bývá "
 "ale více zarušené. Pásmo 5 GHz je novější standard a nemusí být "
 "podporováno všemi vámi používanými zařízeními. Obvykle bývá méně "
 "zarušené, signál se ale hůře šíří uvnitř budov."
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
+#, fuzzy
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 "Změna tohoto parametru upraví režim fungování 802.11n/ac. 802.11n s "
 "kanály o šíři 40 MHz může pomoci k vyšší propustnosti, je ale náchylnější"
 " na rušení. Pokud nevíte co zvolit, použijte výchozí volbu s kanálem šíře"
 " 20 MHz."
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -377,12 +404,14 @@ msgstr ""
 "ostatní zařízení a k rozhraní pro nastavování směrovače. Parametry sítě "
 "pro hosty je možné nastavit na panelu „Síť pro hosty“."
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
+#, fuzzy
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 "Standard WPA3 je nová nejbezpečnější metoda, již se doporučuje používat "
 "se všemi zařízeními, která ji podporují. Starší zařízení bez podpory WPA3"
@@ -399,15 +428,16 @@ msgstr ""
 "Změny, které byly provedeny, nebyly uloženy. Jste si jistý, že chcete "
 "opustit stránku?"
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr "Aktualizuje se"
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+#, fuzzy
+msgid "Loading"
 msgstr "Načíst nastavení"
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr "Uložit"
 

package/translations/da/LC_MESSAGES/forisjs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
 "PO-Revision-Date: 2019-02-19 13:34+0100\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language: da\n"
@@ -35,7 +35,7 @@ msgid "An unknown API error occurred."
 msgstr ""
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr ""
 
@@ -178,7 +178,7 @@ msgid "Band"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+msgid "802.11n/ac/ax/be mode"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -212,16 +212,16 @@ msgstr ""
 msgid "Enable Guest Wi-Fi"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr ""
 
@@ -302,49 +302,70 @@ msgstr ""
 msgid "802.11ax - 160 MHz wide channel"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+msgid "802.11be - 20 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:23
+msgid "802.11be - 40 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:24
+msgid "802.11be - 80 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:25
+msgid "802.11be - 160 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:26
+msgid "802.11be - 320 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -353,12 +374,13 @@ msgid ""
 "tab."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 
 #: src/form/components/ForisForm.js:121
@@ -369,15 +391,15 @@ msgstr ""
 msgid "Changes you made may not be saved. Are you sure you want to leave?"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+msgid "Loading"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr ""
 
@@ -522,3 +544,42 @@ msgstr ""
 #~ msgid "Confirm reboot"
 #~ msgstr ""
 
+#~ msgid "Load settings"
+#~ msgstr ""
+
+#~ msgid "802.11n/ac/ax mode"
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The 2.4 GHz band is more widely"
+#~ " supported by clients, but tends to"
+#~ " have more interference. The 5 GHz"
+#~ " band is a newer standard and "
+#~ "may not be supported by all your"
+#~ " devices. It usually has less "
+#~ "interference, but the signal does not"
+#~ " carry so well indoors."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "Change this to adjust 802.11n/ac/ax mode"
+#~ " of operation. 802.11n with 40 MHz"
+#~ " wide channels can yield higher "
+#~ "throughput but can cause more "
+#~ "interference in the network. If you "
+#~ "don't know what to choose, use the"
+#~ " default option with 20 MHz wide "
+#~ "channel."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The WPA3 standard is the new most"
+#~ " secure encryption method that is "
+#~ "suggested to be used with any "
+#~ "device that supports it. The older "
+#~ "devices without WPA3 support require "
+#~ "older WPA2. If you experience issues "
+#~ "with connecting older devices, try to"
+#~ " enable WPA2."
+#~ msgstr ""
+