foris 6.7.2 → 6.8.0-beta.b24aa684

package/translations/de/LC_MESSAGES/forisjs.po

@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
-"PO-Revision-Date: 2024-01-04 21:08+0000\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
+"PO-Revision-Date: 2025-07-16 23:01+0000\n"
 "Last-Translator: Erik Pfannenstein <debianignatz@gmx.de>\n"
 "Language: de\n"
 "Language-Team: German <https://hosted.weblate.org/projects/turris/foris-"
@@ -36,7 +36,7 @@ msgid "An unknown API error occurred."
 msgstr "Ein unbekannter API-Fehler ist aufgetreten."
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr "Schließen"
 
@@ -50,97 +50,95 @@ msgstr "Kopieren"
 
 #: src/bootstrap/NumberInput.js:84 src/bootstrap/NumberInput.js:85
 msgid "Increase value. Hint: Hold to increase faster."
-msgstr ""
+msgstr "Wert erhöhen. Hinweis: Halten, um den Wert schneller zu erhöhen."
 
 #: src/bootstrap/NumberInput.js:101 src/bootstrap/NumberInput.js:102
 msgid "Decrease value. Hint: Hold to decrease faster."
-msgstr ""
+msgstr "Wert senken. Hinweis: Halten, um den Wert schneller zu senken."
 
 #: src/common/ActionButtonWithModal/ActionButtonWithModal.js:67
-#, fuzzy
 msgid "Action successful."
-msgstr "Einstellungen erfolgreich gespeichert"
+msgstr "Aktion erfolgreich."
 
 #: src/common/ActionButtonWithModal/ActionButtonWithModal.js:76
 msgid "Action failed."
-msgstr ""
+msgstr "Aktion fehlgeschlagen."
 
 #: src/common/ActionButtonWithModal/ActionButtonWithModal.js:147
 msgid "Cancel"
 msgstr "Abbrechen"
 
 #: src/common/ActionButtonWithModal/ActionButtonWithModal.js:150
-#, fuzzy
 msgid "Confirm"
-msgstr "Neustart bestätigen"
+msgstr "Bestätigen"
 
 #: src/common/RichTable/RichTable.js:87
 msgid "Search…"
-msgstr ""
+msgstr "Suche …"
 
 #: src/common/RichTable/RichTableBody.js:50
 msgid "No results."
-msgstr ""
+msgstr "Keine Ergebnisse."
 
 #: src/common/RichTable/RichTableColumnsDropdown.js:27
 msgid "Columns"
-msgstr ""
+msgstr "Spalten"
 
 #: src/common/RichTable/RichTableColumnsDropdown.js:80
 msgid "Reset"
-msgstr ""
+msgstr "Zurücksetzen"
 
 #: src/common/RichTable/RichTableHeader.js:29
 msgid "Sort ascending"
-msgstr ""
+msgstr "Aufsteigend sortieren"
 
 #: src/common/RichTable/RichTableHeader.js:30
 msgid "Sort descending"
-msgstr ""
+msgstr "Absteigend sortieren"
 
 #: src/common/RichTable/RichTableHeader.js:31
 msgid "Clear sort"
-msgstr ""
+msgstr "Sortierung aufheben"
 
 #: src/common/RichTable/RichTablePagination.js:65
 msgid "Pagination navigation bar"
-msgstr ""
+msgstr "Paginierungs-Navigationsleiste"
 
 #: src/common/RichTable/RichTablePagination.js:71
 msgid "First page"
-msgstr ""
+msgstr "Erste Seite"
 
 #: src/common/RichTable/RichTablePagination.js:77
 msgid "Previous page"
-msgstr ""
+msgstr "Vorherige Seite"
 
 #: src/common/RichTable/RichTablePagination.js:83
 msgid "Next page"
-msgstr ""
+msgstr "Nächste Seite"
 
 #: src/common/RichTable/RichTablePagination.js:89
 msgid "Last page"
-msgstr ""
+msgstr "Letzte Seite"
 
 #: src/common/RichTable/RichTablePagination.js:95
 msgid "Page"
-msgstr ""
+msgstr "Seite"
 
 #: src/common/RichTable/RichTablePagination.js:98
 msgid "of"
-msgstr ""
+msgstr "von"
 
 #: src/common/RichTable/RichTablePagination.js:106
 msgid "Rows per page:"
-msgstr ""
+msgstr "Zeilen pro Seite:"
 
 #: src/common/RichTable/RichTablePagination.js:109
 msgid "Select rows per page"
-msgstr ""
+msgstr "Zeilen pro Seite auswählen"
 
 #: src/common/RichTable/RichTablePagination.js:121
 msgid "All"
-msgstr ""
+msgstr "Alle"
 
 #: src/common/WiFiSettings/ResetWiFiSettings.js:39
 msgid "An error occurred during resetting Wi-Fi settings."
@@ -183,10 +181,11 @@ msgstr "SSID verbergen"
 
 #: src/common/WiFiSettings/WiFiForm.js:159
 msgid "Band"
-msgstr ""
+msgstr "Band"
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+#, fuzzy
+msgid "802.11n/ac/ax/be mode"
 msgstr "802.11n/ac/ax-Modus"
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -222,16 +221,16 @@ msgstr "Benutzerdefiniert"
 msgid "Enable Guest Wi-Fi"
 msgstr "Gast-WLAN aktivieren"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr "QR-Code anzeigen"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr "WLAN QR-Code"
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr "PDF herunterladen"
 
@@ -285,9 +284,8 @@ msgid "802.11ac - 80 MHz wide channel"
 msgstr "802.11ac - 80 MHz breiter Kanal"
 
 #: src/common/WiFiSettings/constants.js:15
-#, fuzzy
 msgid "802.11ac - 80+80 MHz wide channel"
-msgstr "802.11ac - 80 MHz breiter Kanal"
+msgstr "802.11ac - 80+80 MHz breiter Kanal"
 
 #: src/common/WiFiSettings/constants.js:16
 msgid "802.11ac - 160 MHz wide channel"
@@ -306,27 +304,51 @@ msgid "802.11ax - 80 MHz wide channel"
 msgstr "802.11ax - 80 MHz breiter Kanal"
 
 #: src/common/WiFiSettings/constants.js:20
-#, fuzzy
 msgid "802.11ax - 80+80 MHz wide channel"
-msgstr "802.11ax - 80 MHz breiter Kanal"
+msgstr "802.11ax - 80+80 MHz breiter Kanal"
 
 #: src/common/WiFiSettings/constants.js:21
 msgid "802.11ax - 160 MHz wide channel"
 msgstr "802.11ax - 160 MHz breiter Kanal"
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+#, fuzzy
+msgid "802.11be - 20 MHz wide channel"
+msgstr "802.11n - 20 MHz breiter Kanal"
+
+#: src/common/WiFiSettings/constants.js:23
+#, fuzzy
+msgid "802.11be - 40 MHz wide channel"
+msgstr "802.11n - 40 MHz breiter Kanal"
+
+#: src/common/WiFiSettings/constants.js:24
+#, fuzzy
+msgid "802.11be - 80 MHz wide channel"
+msgstr "802.11ax - 80 MHz breiter Kanal"
+
+#: src/common/WiFiSettings/constants.js:25
+#, fuzzy
+msgid "802.11be - 160 MHz wide channel"
+msgstr "802.11ax - 160 MHz breiter Kanal"
+
+#: src/common/WiFiSettings/constants.js:26
+#, fuzzy
+msgid "802.11be - 320 MHz wide channel"
+msgstr "802.11n - 20 MHz breiter Kanal"
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr "Nur WPA3"
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr "WPA3 mit WPA2 als Ausweichmöglichkeit (Voreinstellung)"
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr "Nur WPA2"
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
@@ -334,22 +356,25 @@ msgstr ""
 "SSIDs, die nicht standardmäßige Zeichen enthalten, können auf manchen "
 "Geräten Probleme verursachen."
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr "WPA2/3 Pre-Shard Key, der zum Verbinden mit dem Netzwerk notwendig ist."
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 "Falls aktiviert, wird das Netzwerk nicht in der Liste der verfügbaren "
 "drahtlosen Netzwerke angezeigt."
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
+#, fuzzy
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 "Das 2,4 GHz-Band wird von allen Geräten unterstützt, ist aber tendenziell"
 " stärker mit Interferenzen belastet. Das 5-GHz-Band ist ein neuerer "
@@ -357,19 +382,19 @@ msgstr ""
 "wird. Es hat in der Regel weniger Interferenzen, aber das Signal trägt "
 "nicht so gut in Innenräumen."
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
+#, fuzzy
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 "Ändern Sie diese Option, um den 802.11n/ac/ax-Betriebsmodus anzupassen. "
 "40 MHz breite Kanäle können bei 802.11n mehr Daten transportieren, jedoch"
 " zu mehr Interferenzen im Netzwerk führen. Wenn Sie nicht wissen, was Sie"
 " wählen sollen, verwenden Sie die Voreinstellung mit 20 MHz Kanalbreite."
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -383,12 +408,14 @@ msgstr ""
 "Konfigurationsschnittstelle des Routers. Die Parameter des Gastnetzwerks "
 "können auf der Gastnetzwerk-Registerkarte eingestellt werden."
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
+#, fuzzy
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 "Der WPA3-Standard ist die neue Verschlüsselungsmethode mit der besten "
 "Sicherheit. Er empfiehlt sich für jedes Gerät, das ihn unterstützt, aber "
@@ -406,15 +433,16 @@ msgstr ""
 "Änderungen, die Sie vorgenommen haben, werden möglicherweise nicht "
 "gespeichert. Möchten Sie wirklich gehen?"
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr "Aktualisiere"
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+#, fuzzy
+msgid "Loading"
 msgstr "Einstellungen laden"
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr "Speichern"
 

package/translations/el/LC_MESSAGES/forisjs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PROJECT VERSION\n"
 "Report-Msgid-Bugs-To: EMAIL@ADDRESS\n"
-"POT-Creation-Date: 2025-04-04 15:14+0200\n"
+"POT-Creation-Date: 2025-11-26 20:12+0300\n"
 "PO-Revision-Date: 2025-01-18 11:00+0000\n"
 "Last-Translator: Thanasis <thanasakis11mail@gmail.com>\n"
 "Language: el\n"
@@ -36,7 +36,7 @@ msgid "An unknown API error occurred."
 msgstr ""
 
 #: src/bootstrap/Alert.js:73 src/bootstrap/Modal.js:103
-#: src/common/WiFiSettings/WiFiQRCode.js:89
+#: src/common/WiFiSettings/WiFiQRCode.js:88
 msgid "Close"
 msgstr "Κλείσιμο"
 
@@ -180,7 +180,7 @@ msgid "Band"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:186
-msgid "802.11n/ac/ax mode"
+msgid "802.11n/ac/ax/be mode"
 msgstr ""
 
 #: src/common/WiFiSettings/WiFiForm.js:199
@@ -215,16 +215,16 @@ msgstr "Προσαρμοσμένο"
 msgid "Enable Guest Wi-Fi"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:43
-#: src/common/WiFiSettings/WiFiQRCode.js:44
+#: src/common/WiFiSettings/WiFiQRCode.js:40
+#: src/common/WiFiSettings/WiFiQRCode.js:41
 msgid "Show QR code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:70
+#: src/common/WiFiSettings/WiFiQRCode.js:67
 msgid "Wi-Fi QR Code"
 msgstr ""
 
-#: src/common/WiFiSettings/WiFiQRCode.js:102
+#: src/common/WiFiSettings/WiFiQRCode.js:98
 msgid "Download PDF"
 msgstr ""
 
@@ -305,49 +305,70 @@ msgstr ""
 msgid "802.11ax - 160 MHz wide channel"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:29
+#: src/common/WiFiSettings/constants.js:22
+msgid "802.11be - 20 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:23
+msgid "802.11be - 40 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:24
+msgid "802.11be - 80 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:25
+msgid "802.11be - 160 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:26
+msgid "802.11be - 320 MHz wide channel"
+msgstr ""
+
+#: src/common/WiFiSettings/constants.js:34
 msgid "WPA3 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:30
+#: src/common/WiFiSettings/constants.js:35
 msgid "WPA3 with WPA2 as fallback (default)"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:31
+#: src/common/WiFiSettings/constants.js:36
 msgid "WPA2 only"
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:34
+#: src/common/WiFiSettings/constants.js:39
 msgid ""
 "SSID which contains non-standard characters could cause problems on some "
 "devices."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:37
+#: src/common/WiFiSettings/constants.js:42
 msgid "WPA2/3 pre-shared key, that is required to connect to the network."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:40
+#: src/common/WiFiSettings/constants.js:45
 msgid "If set, network is not visible when scanning for available networks."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:43
+#: src/common/WiFiSettings/constants.js:48
 msgid ""
 "The 2.4 GHz band is more widely supported by clients, but tends to have "
 "more interference. The 5 GHz band is a newer standard and may not be "
 "supported by all your devices. It usually has less interference, but the "
-"signal does not carry so well indoors."
+"signal does not carry so well indoors. The 6 GHz band is an even newer "
+"standard and is currently supported only by a limited set of devices. As "
+"it is not widely used now, it has only very little interference."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:46
+#: src/common/WiFiSettings/constants.js:51
 msgid ""
-"Change this to adjust 802.11n/ac/ax mode of operation. 802.11n with 40 "
-"MHz wide channels can yield higher throughput but can cause more "
-"interference in the network. If you don't know what to choose, use the "
-"default option with 20 MHz wide channel."
+"Change this to adjust 802.11n/ac/ax/be mode of operation. Wider channels "
+"can yield higher throughput but can cause more interference in the "
+"network. If you don't know what to choose, use the default option."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:49
+#: src/common/WiFiSettings/constants.js:54
 msgid ""
 "Enables Wi-Fi for guests, which is separated from LAN network. Devices "
 "connected to this network are allowed to access the internet, but aren't "
@@ -356,12 +377,13 @@ msgid ""
 "tab."
 msgstr ""
 
-#: src/common/WiFiSettings/constants.js:52
+#: src/common/WiFiSettings/constants.js:57
 msgid ""
 "The WPA3 standard is the new most secure encryption method that is "
 "suggested to be used with any device that supports it. The older devices "
 "without WPA3 support require older WPA2. If you experience issues with "
-"connecting older devices, try to enable WPA2."
+"connecting older devices, try to enable WPA2. The 6 GHz band supports "
+"only WPA3."
 msgstr ""
 
 #: src/form/components/ForisForm.js:121
@@ -372,15 +394,15 @@ msgstr ""
 msgid "Changes you made may not be saved. Are you sure you want to leave?"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:34
+#: src/form/components/SubmitButton.js:37
 msgid "Updating"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:37
-msgid "Load settings"
+#: src/form/components/SubmitButton.js:40
+msgid "Loading"
 msgstr ""
 
-#: src/form/components/SubmitButton.js:40
+#: src/form/components/SubmitButton.js:43
 msgid "Save"
 msgstr ""
 
@@ -522,3 +544,42 @@ msgstr ""
 #~ msgid "Are you sure you want to restart the router?"
 #~ msgstr "Είστε βέβαιοι ότι θέλετε να κάνετε επανεκκίνηση του δρομολογητή;"
 
+#~ msgid "Load settings"
+#~ msgstr ""
+
+#~ msgid "802.11n/ac/ax mode"
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The 2.4 GHz band is more widely"
+#~ " supported by clients, but tends to"
+#~ " have more interference. The 5 GHz"
+#~ " band is a newer standard and "
+#~ "may not be supported by all your"
+#~ " devices. It usually has less "
+#~ "interference, but the signal does not"
+#~ " carry so well indoors."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "Change this to adjust 802.11n/ac/ax mode"
+#~ " of operation. 802.11n with 40 MHz"
+#~ " wide channels can yield higher "
+#~ "throughput but can cause more "
+#~ "interference in the network. If you "
+#~ "don't know what to choose, use the"
+#~ " default option with 20 MHz wide "
+#~ "channel."
+#~ msgstr ""
+
+#~ msgid ""
+#~ "The WPA3 standard is the new most"
+#~ " secure encryption method that is "
+#~ "suggested to be used with any "
+#~ "device that supports it. The older "
+#~ "devices without WPA3 support require "
+#~ "older WPA2. If you experience issues "
+#~ "with connecting older devices, try to"
+#~ " enable WPA2."
+#~ msgstr ""
+