any2orca-profiles 0.1.0 → 0.3.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (52) hide show
  1. package/CHANGELOG.md +20 -0
  2. package/NOTICE +2 -2
  3. package/README.md +10 -5
  4. package/data/index.json +103 -7
  5. package/data/profiles/snapmaker-u1-0.2-0.12std.json +52 -11
  6. package/data/profiles/snapmaker-u1-0.2-hq.json +52 -11
  7. package/data/profiles/snapmaker-u1-0.2-standard.json +52 -11
  8. package/data/profiles/snapmaker-u1-0.4-0.08hq.json +49 -11
  9. package/data/profiles/snapmaker-u1-0.4-0.12fin.json +49 -11
  10. package/data/profiles/snapmaker-u1-0.4-0.16hq.json +49 -11
  11. package/data/profiles/snapmaker-u1-0.4-0.20hq.json +49 -11
  12. package/data/profiles/snapmaker-u1-0.4-0.28ed.json +49 -11
  13. package/data/profiles/snapmaker-u1-0.4-colormix.json +49 -11
  14. package/data/profiles/snapmaker-u1-0.4-draft.json +49 -11
  15. package/data/profiles/snapmaker-u1-0.4-standard.json +51 -13
  16. package/data/profiles/snapmaker-u1-0.6-0.18std.json +51 -16
  17. package/data/profiles/snapmaker-u1-0.6-fine.json +51 -16
  18. package/data/profiles/snapmaker-u1-0.6-standard.json +51 -16
  19. package/data/profiles/snapmaker-u1-0.8-0.32std.json +51 -16
  20. package/data/profiles/snapmaker-u1-0.8-0.40str.json +51 -16
  21. package/data/profiles/snapmaker-u1-0.8-fine.json +51 -16
  22. package/data/profiles/snapmaker-u1-0.8-standard.json +51 -16
  23. package/data/releases/2.4.0/index.json +1288 -0
  24. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-0.12std.json +1772 -0
  25. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-hq.json +1772 -0
  26. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-standard.json +1772 -0
  27. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.08hq.json +1843 -0
  28. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.12fin.json +1843 -0
  29. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.16hq.json +1843 -0
  30. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.20hq.json +1843 -0
  31. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.28ed.json +1843 -0
  32. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-colormix.json +1843 -0
  33. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-draft.json +1843 -0
  34. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-standard.json +1848 -0
  35. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-0.18std.json +1775 -0
  36. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-fine.json +1775 -0
  37. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-standard.json +1775 -0
  38. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.32std.json +1775 -0
  39. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.40str.json +1775 -0
  40. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-fine.json +1775 -0
  41. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-standard.json +1775 -0
  42. package/data/sources/prusaslicer/PrusaResearch-2.2.0.json +1921 -0
  43. package/data/sources/prusaslicer/PrusaResearch-2.3.1.json +2068 -0
  44. package/data/sources/prusaslicer/PrusaResearch-2.4.0.json +2201 -0
  45. package/data/sources/prusaslicer/PrusaResearch-2.4.2.json +2202 -0
  46. package/data/sources/prusaslicer/PrusaResearch-2.6.0.json +4885 -0
  47. package/data/sources/prusaslicer/PrusaResearch-2.6.1.json +5788 -0
  48. package/data/sources/prusaslicer/PrusaResearch-2.7.0.json +7406 -0
  49. package/data/sources/prusaslicer/PrusaResearch-2.7.1.json +7440 -0
  50. package/data/sources/prusaslicer/PrusaResearch-2.8.1.json +9447 -0
  51. package/data/sources/prusaslicer/PrusaResearch-2.9.6.json +11670 -0
  52. package/package.json +1 -1
package/data/profiles/snapmaker-u1-0.6-standard.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -327,6 +327,7 @@
327
327
  "bed_mesh_probe_distance": "50,50",
328
328
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
329
329
  "best_object_pos": "0.5,0.5",
330
+ "bottom_color_penetration_layers": "3",
330
331
  "bottom_shell_layers": "3",
331
332
  "bottom_shell_thickness": "0",
332
333
  "bottom_solid_infill_flow_ratio": "1",
@@ -352,7 +353,7 @@
352
353
  "0"
353
354
  ],
354
355
  "change_extrusion_role_gcode": "",
355
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
356
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
356
357
  "close_fan_the_first_x_layers": [
357
358
  "1"
358
359
  ],
@@ -430,6 +431,8 @@
430
431
  ],
431
432
  "enable_prime_tower": "1",
432
433
  "enable_support": "0",
434
+ "enable_tower_interface_cooldown_during_tower": "0",
435
+ "enable_tower_interface_features": "0",
433
436
  "enforce_support_layers": "0",
434
437
  "eng_plate_temp": [
435
438
  "45"
@@ -472,6 +475,9 @@
472
475
  ],
473
476
  "fan_speedup_overhangs": "1",
474
477
  "fan_speedup_time": "0",
478
+ "filament_adhesiveness_category": [
479
+ "100"
480
+ ],
475
481
  "filament_colour": [
476
482
  "#F2754E"
477
483
  ],
@@ -614,6 +620,15 @@
614
620
  "filament_toolchange_delay": [
615
621
  "0"
616
622
  ],
623
+ "filament_tower_interface_pre_extrusion_dist": [
624
+ "10"
625
+ ],
626
+ "filament_tower_interface_pre_extrusion_length": [
627
+ "0"
628
+ ],
629
+ "filament_tower_interface_print_temp": [
630
+ "-1"
631
+ ],
617
632
  "filament_tower_ironing_area": [
618
633
  "4"
619
634
  ],
@@ -630,9 +645,6 @@
630
645
  "snapmaker"
631
646
  ],
632
647
  "filament_volume_type": [
633
- "standard",
634
- "standard",
635
- "standard",
636
648
  "standard"
637
649
  ],
638
650
  "filament_wipe": [
@@ -647,12 +659,14 @@
647
659
  "filament_z_hop_types": [
648
660
  "Slope Lift"
649
661
  ],
650
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
662
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
651
663
  "fill_multiline": "1",
652
664
  "filter_out_gap_fill": "1",
653
665
  "first_layer_print_sequence": [
654
666
  "0"
655
667
  ],
668
+ "first_layer_travel_acceleration": "100%",
669
+ "first_layer_travel_jerk": "100%",
656
670
  "flush_into_infill": "0",
657
671
  "flush_into_objects": "0",
658
672
  "flush_into_support": "1",
@@ -719,10 +733,10 @@
719
733
  "hole_to_polyhole_twisted": "1",
720
734
  "host_type": "octoprint",
721
735
  "hot_plate_temp": [
722
- "55"
736
+ "65"
723
737
  ],
724
738
  "hot_plate_temp_initial_layer": [
725
- "55"
739
+ "65"
726
740
  ],
727
741
  "idle_temperature": [
728
742
  "0"
@@ -817,7 +831,7 @@
817
831
  "0",
818
832
  "0"
819
833
  ],
820
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
834
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
821
835
  "machine_load_filament_time": "0",
822
836
  "machine_max_acceleration_e": [
823
837
  "5000",
@@ -892,14 +906,14 @@
892
906
  "0"
893
907
  ],
894
908
  "machine_pause_gcode": "M600",
895
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
909
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
896
910
  "machine_tool_change_time": "5",
897
911
  "machine_unload_filament_time": "0",
898
912
  "make_overhang_printable": "0",
899
913
  "make_overhang_printable_angle": "55",
900
914
  "make_overhang_printable_hole_size": "0",
901
915
  "manual_filament_change": "0",
902
- "max_bridge_length": "10",
916
+ "max_bridge_length": "0",
903
917
  "max_layer_height": [
904
918
  "0.42",
905
919
  "0.42",
@@ -1026,6 +1040,7 @@
1026
1040
  "prime_tower_brim_chamfer": "1",
1027
1041
  "prime_tower_brim_chamfer_max_width": "4",
1028
1042
  "prime_tower_brim_width": "5",
1043
+ "prime_tower_enable_framework": "0",
1029
1044
  "prime_tower_width": "30",
1030
1045
  "prime_volume": "68",
1031
1046
  "print_compatible_printers": [
@@ -1061,7 +1076,7 @@
1061
1076
  "raft_contact_distance": "0.1",
1062
1077
  "raft_expansion": "1.5",
1063
1078
  "raft_first_layer_density": "90%",
1064
- "raft_first_layer_expansion": "2",
1079
+ "raft_first_layer_expansion": "-1",
1065
1080
  "raft_layers": "0",
1066
1081
  "ramming_line_width_ratio": "2",
1067
1082
  "ramming_pressure_advance_value": "0.02",
@@ -1257,6 +1272,7 @@
1257
1272
  "support_interface_bottom_layers": "2",
1258
1273
  "support_interface_filament": "0",
1259
1274
  "support_interface_loop_pattern": "0",
1275
+ "support_interface_min_area": "0.25",
1260
1276
  "support_interface_not_for_body": "1",
1261
1277
  "support_interface_pattern": "auto",
1262
1278
  "support_interface_spacing": "0.5",
@@ -1284,6 +1300,11 @@
1284
1300
  "support_threshold_angle": "35",
1285
1301
  "support_threshold_overlap": "50%",
1286
1302
  "support_top_z_distance": "0.2",
1303
+ "support_transition_flow_ratio": "1",
1304
+ "support_transition_perimeter": "1",
1305
+ "support_transition_speed": [
1306
+ "50"
1307
+ ],
1287
1308
  "support_type": "tree(auto)",
1288
1309
  "symmetric_infill_y_axis": "0",
1289
1310
  "temperature_vitrification": [
@@ -1311,6 +1332,7 @@
1311
1332
  "timelapse_type": "0",
1312
1333
  "tool_change_temprature_wait": "0",
1313
1334
  "top_bottom_infill_wall_overlap": "25%",
1335
+ "top_color_penetration_layers": "4",
1314
1336
  "top_shell_layers": "3",
1315
1337
  "top_shell_thickness": "0.8",
1316
1338
  "top_solid_infill_flow_ratio": "1",
@@ -1346,7 +1368,7 @@
1346
1368
  "tree_support_angle_slow": "25",
1347
1369
  "tree_support_auto_brim": "1",
1348
1370
  "tree_support_branch_angle": "45",
1349
- "tree_support_branch_angle_organic": "40",
1371
+ "tree_support_branch_angle_organic": "45",
1350
1372
  "tree_support_branch_diameter": "2",
1351
1373
  "tree_support_branch_diameter_angle": "5",
1352
1374
  "tree_support_branch_diameter_organic": "2",
@@ -1355,6 +1377,7 @@
1355
1377
  "tree_support_brim_width": "3",
1356
1378
  "tree_support_tip_diameter": "0.8",
1357
1379
  "tree_support_top_rate": "30%",
1380
+ "tree_support_transition_layers": "2",
1358
1381
  "tree_support_wall_count": "0",
1359
1382
  "upward_compatible_machine": [],
1360
1383
  "use_firmware_retraction": "0",
@@ -1436,7 +1459,7 @@
1436
1459
  ],
1437
1460
  "z_offset": "0",
1438
1461
  "from": "project",
1439
- "version": "2.4.0"
1462
+ "version": "2.4.1"
1440
1463
  },
1441
1464
  "filamentShape": {
1442
1465
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1473,6 +1496,9 @@
1473
1496
  "enable_overhang_bridge_fan": [
1474
1497
  "1"
1475
1498
  ],
1499
+ "filament_adhesiveness_category": [
1500
+ "100"
1501
+ ],
1476
1502
  "filament_diameter": [
1477
1503
  "1.75"
1478
1504
  ],
@@ -1769,6 +1795,15 @@
1769
1795
  ],
1770
1796
  "filament_unload_time": [
1771
1797
  "2"
1798
+ ],
1799
+ "filament_tower_interface_pre_extrusion_dist": [
1800
+ "10"
1801
+ ],
1802
+ "filament_tower_interface_pre_extrusion_length": [
1803
+ "0"
1804
+ ],
1805
+ "filament_tower_interface_print_temp": [
1806
+ "-1"
1772
1807
  ]
1773
1808
  },
1774
1809
  "highFlowOverrides": {}
package/data/profiles/snapmaker-u1-0.8-0.32std.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213 =====================\n\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -327,6 +327,7 @@
327
327
  "bed_mesh_probe_distance": "50,50",
328
328
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
329
329
  "best_object_pos": "0.5,0.5",
330
+ "bottom_color_penetration_layers": "3",
330
331
  "bottom_shell_layers": "3",
331
332
  "bottom_shell_thickness": "0",
332
333
  "bottom_solid_infill_flow_ratio": "1",
@@ -352,7 +353,7 @@
352
353
  "0"
353
354
  ],
354
355
  "change_extrusion_role_gcode": "",
355
- "change_filament_gcode": ";===== date: 20251213 =====================\n\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
356
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
356
357
  "close_fan_the_first_x_layers": [
357
358
  "1"
358
359
  ],
@@ -430,6 +431,8 @@
430
431
  ],
431
432
  "enable_prime_tower": "1",
432
433
  "enable_support": "0",
434
+ "enable_tower_interface_cooldown_during_tower": "0",
435
+ "enable_tower_interface_features": "0",
433
436
  "enforce_support_layers": "0",
434
437
  "eng_plate_temp": [
435
438
  "45"
@@ -472,6 +475,9 @@
472
475
  ],
473
476
  "fan_speedup_overhangs": "1",
474
477
  "fan_speedup_time": "0",
478
+ "filament_adhesiveness_category": [
479
+ "100"
480
+ ],
475
481
  "filament_colour": [
476
482
  "#F2754E"
477
483
  ],
@@ -614,6 +620,15 @@
614
620
  "filament_toolchange_delay": [
615
621
  "0"
616
622
  ],
623
+ "filament_tower_interface_pre_extrusion_dist": [
624
+ "10"
625
+ ],
626
+ "filament_tower_interface_pre_extrusion_length": [
627
+ "0"
628
+ ],
629
+ "filament_tower_interface_print_temp": [
630
+ "-1"
631
+ ],
617
632
  "filament_tower_ironing_area": [
618
633
  "4"
619
634
  ],
@@ -630,9 +645,6 @@
630
645
  "snapmaker"
631
646
  ],
632
647
  "filament_volume_type": [
633
- "standard",
634
- "standard",
635
- "standard",
636
648
  "standard"
637
649
  ],
638
650
  "filament_wipe": [
@@ -647,12 +659,14 @@
647
659
  "filament_z_hop_types": [
648
660
  "nil"
649
661
  ],
650
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
662
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
651
663
  "fill_multiline": "1",
652
664
  "filter_out_gap_fill": "1",
653
665
  "first_layer_print_sequence": [
654
666
  "0"
655
667
  ],
668
+ "first_layer_travel_acceleration": "100%",
669
+ "first_layer_travel_jerk": "100%",
656
670
  "flush_into_infill": "0",
657
671
  "flush_into_objects": "0",
658
672
  "flush_into_support": "1",
@@ -719,10 +733,10 @@
719
733
  "hole_to_polyhole_twisted": "1",
720
734
  "host_type": "octoprint",
721
735
  "hot_plate_temp": [
722
- "55"
736
+ "65"
723
737
  ],
724
738
  "hot_plate_temp_initial_layer": [
725
- "55"
739
+ "65"
726
740
  ],
727
741
  "idle_temperature": [
728
742
  "0"
@@ -817,7 +831,7 @@
817
831
  "0",
818
832
  "0"
819
833
  ],
820
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
834
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
821
835
  "machine_load_filament_time": "0",
822
836
  "machine_max_acceleration_e": [
823
837
  "5000",
@@ -892,14 +906,14 @@
892
906
  "0"
893
907
  ],
894
908
  "machine_pause_gcode": "M600",
895
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
909
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
896
910
  "machine_tool_change_time": "5",
897
911
  "machine_unload_filament_time": "0",
898
912
  "make_overhang_printable": "0",
899
913
  "make_overhang_printable_angle": "55",
900
914
  "make_overhang_printable_hole_size": "0",
901
915
  "manual_filament_change": "0",
902
- "max_bridge_length": "10",
916
+ "max_bridge_length": "0",
903
917
  "max_layer_height": [
904
918
  "0.56",
905
919
  "0.56",
@@ -1026,6 +1040,7 @@
1026
1040
  "prime_tower_brim_chamfer": "1",
1027
1041
  "prime_tower_brim_chamfer_max_width": "4",
1028
1042
  "prime_tower_brim_width": "5",
1043
+ "prime_tower_enable_framework": "0",
1029
1044
  "prime_tower_width": "30",
1030
1045
  "prime_volume": "72",
1031
1046
  "print_compatible_printers": [
@@ -1061,7 +1076,7 @@
1061
1076
  "raft_contact_distance": "0.1",
1062
1077
  "raft_expansion": "1.5",
1063
1078
  "raft_first_layer_density": "90%",
1064
- "raft_first_layer_expansion": "2",
1079
+ "raft_first_layer_expansion": "-1",
1065
1080
  "raft_layers": "0",
1066
1081
  "ramming_line_width_ratio": "2",
1067
1082
  "ramming_pressure_advance_value": "0.02",
@@ -1257,6 +1272,7 @@
1257
1272
  "support_interface_bottom_layers": "2",
1258
1273
  "support_interface_filament": "0",
1259
1274
  "support_interface_loop_pattern": "0",
1275
+ "support_interface_min_area": "0.25",
1260
1276
  "support_interface_not_for_body": "1",
1261
1277
  "support_interface_pattern": "auto",
1262
1278
  "support_interface_spacing": "0.5",
@@ -1284,6 +1300,11 @@
1284
1300
  "support_threshold_angle": "35",
1285
1301
  "support_threshold_overlap": "50%",
1286
1302
  "support_top_z_distance": "0.2",
1303
+ "support_transition_flow_ratio": "1",
1304
+ "support_transition_perimeter": "1",
1305
+ "support_transition_speed": [
1306
+ "50"
1307
+ ],
1287
1308
  "support_type": "tree(auto)",
1288
1309
  "symmetric_infill_y_axis": "0",
1289
1310
  "temperature_vitrification": [
@@ -1311,6 +1332,7 @@
1311
1332
  "timelapse_type": "0",
1312
1333
  "tool_change_temprature_wait": "0",
1313
1334
  "top_bottom_infill_wall_overlap": "25%",
1335
+ "top_color_penetration_layers": "4",
1314
1336
  "top_shell_layers": "3",
1315
1337
  "top_shell_thickness": "0.8",
1316
1338
  "top_solid_infill_flow_ratio": "1",
@@ -1346,7 +1368,7 @@
1346
1368
  "tree_support_angle_slow": "25",
1347
1369
  "tree_support_auto_brim": "1",
1348
1370
  "tree_support_branch_angle": "45",
1349
- "tree_support_branch_angle_organic": "40",
1371
+ "tree_support_branch_angle_organic": "45",
1350
1372
  "tree_support_branch_diameter": "2",
1351
1373
  "tree_support_branch_diameter_angle": "5",
1352
1374
  "tree_support_branch_diameter_organic": "2",
@@ -1355,6 +1377,7 @@
1355
1377
  "tree_support_brim_width": "3",
1356
1378
  "tree_support_tip_diameter": "0.8",
1357
1379
  "tree_support_top_rate": "30%",
1380
+ "tree_support_transition_layers": "2",
1358
1381
  "tree_support_wall_count": "0",
1359
1382
  "upward_compatible_machine": [],
1360
1383
  "use_firmware_retraction": "0",
@@ -1436,7 +1459,7 @@
1436
1459
  ],
1437
1460
  "z_offset": "0",
1438
1461
  "from": "project",
1439
- "version": "2.4.0"
1462
+ "version": "2.4.1"
1440
1463
  },
1441
1464
  "filamentShape": {
1442
1465
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1473,6 +1496,9 @@
1473
1496
  "enable_overhang_bridge_fan": [
1474
1497
  "1"
1475
1498
  ],
1499
+ "filament_adhesiveness_category": [
1500
+ "100"
1501
+ ],
1476
1502
  "filament_diameter": [
1477
1503
  "1.75"
1478
1504
  ],
@@ -1769,6 +1795,15 @@
1769
1795
  ],
1770
1796
  "filament_unload_time": [
1771
1797
  "2"
1798
+ ],
1799
+ "filament_tower_interface_pre_extrusion_dist": [
1800
+ "10"
1801
+ ],
1802
+ "filament_tower_interface_pre_extrusion_length": [
1803
+ "0"
1804
+ ],
1805
+ "filament_tower_interface_print_temp": [
1806
+ "-1"
1772
1807
  ]
1773
1808
  },
1774
1809
  "highFlowOverrides": {}