any2orca-profiles 0.1.0 → 0.3.0

package/CHANGELOG.md

@@ -1,5 +1,25 @@
 # any2orca-profiles
 
+## 0.3.0
+
+### Output-affecting
+
+- **Prusa Research's print presets, for PrusaSlicer conversions.** `data/sources/prusaslicer/PrusaResearch-<version>.json`, one per PrusaSlicer release from 2.2.0 to 2.9.6 (ten), each the bundle PrusaSlicer ships in its own repository at that release tag (AGPL-3.0, like this package) with the release's built-in defaults from its source: the print presets as the bundle has them, own keys and `inherits`, unresolved. Listed in the top `index.json` under `sources`. any2orca 0.7.0 uses them to carry only the print settings a PrusaSlicer project's creator changed, so converted PrusaSlicer files change; nothing else in the catalog changes.
+
+## 0.2.0
+
+### Output-affecting
+
+- **Snapmaker Orca 2.4.1's U1 profiles are added and are the default.** Generated from Snapmaker's v2.4.1 profiles and checked against stock projects saved in 2.4.1, so files converted with the default carry 2.4.1's stock values, its 16 new settings and its version line. The same 18 profiles as 2.4.0; none renamed or retired. Filament settings no filament preset sets, but which Snapmaker Orca writes once per filament (2.4.1's prime tower interface settings), are in the filament template, so a project carries one value per filament.
+
+### Profiles
+
+- **Snapmaker Orca 2.4.0's profiles stay available** in `data/releases/2.4.0/`, unchanged.
+
+### Features
+
+- **One folder per Snapmaker Orca release.** The newest is at the top of `data/`, so a copy made for an older any2orca keeps working and gets it; each older release is in `data/releases/<version>/`, laid out the same way. The top `index.json` lists them all in a new `releases` field (`version`, `application`, `path`).
+
 ## 0.1.0
 
 ### Profiles

package/NOTICE

@@ -2,11 +2,11 @@ any2orca-profiles: third-party data attribution
 
 This is not legal advice; see LICENSE for the terms that apply to this package.
 
-The profile catalog (templates/ and the generated data/) is derived from preset
+The profile catalog (releases/ and the generated data/) is derived from preset
 data published by each supported printer vendor's own OrcaSlicer-family fork,
 today Snapmaker Orca (github.com/Snapmaker/OrcaSlicer), which is
 AGPL-3.0-or-later. That provenance is why this package is AGPL-3.0-or-later.
-data/index.json names the upstream release the catalog tracks.
+data/index.json names the upstream releases the catalog holds.
 
 "Snapmaker," "OrcaSlicer," and other printer and slicer names used in this
 package are trademarks of their respective owners. any2orca is an independent

package/README.md

@@ -1,10 +1,13 @@
 # any2orca-profiles
 
-The printer profile catalog for [any2orca](https://www.npmjs.com/package/any2orca): data only, no code. It holds the Snapmaker U1 profiles, tracking Snapmaker Orca's own presets (`data/index.json` says which release).
+The printer profile catalog for [any2orca](https://www.npmjs.com/package/any2orca): data only, no code. It holds the Snapmaker U1 profiles, Snapmaker Orca's own presets, for each Snapmaker Orca release it supports (`data/index.json` lists them). The newest release is at the top of `data/` and is the default; each older one is in a folder of its own, laid out the same way.
 
 ```
-data/index.json            versions, printers, profiles, retired profile ids, filament names
-data/profiles/<id>.json    one self-contained file per profile
+data/index.json                       the newest release: versions, printers, profiles, retired ids, filament names, and every release held
+data/profiles/<id>.json               one self-contained file per profile
+data/releases/<version>/index.json    an older release's index
+data/releases/<version>/profiles/     its profiles
+data/sources/prusaslicer/<Vendor>-<version>.json  a PrusaSlicer vendor's print presets as that PrusaSlicer release shipped them (own keys and `inherits`, unresolved) and the release's built-in defaults, for telling what a PrusaSlicer project's creator changed
 ```
 
 `any2orca` installs this package and its CLI uses it automatically. In a browser, copy `data/` into your site's static files and point `fetchProfileSource()` or the Web Worker's `profilesUrl` at it.
@@ -25,6 +28,8 @@ Both files are JSON with `"schema": 1`, and `any2orca` checks them when it loads
 | `profiles` | One entry per profile: `id`, `printerId`, `displayName`, `nozzleDiameter`, `layerHeight`, `autoSelectable` (false for a profile only chosen by hand) and `highFlowSpeeds`. |
 | `retired` | Old profile ids that still convert: `id`, the `successorId` used instead, and the old `displayName`. |
 | `filamentNames` | The filament presets Snapmaker installs per nozzle size, for the Snapmaker and Generic naming options. |
+| `sources` | Only in the top `index.json`, optional: `prusaslicer`, the PrusaSlicer vendor bundles the package holds, one per PrusaSlicer release (`vendor`, `name`, `path`, `slicerVersion`, `configVersion`, `slicerTag`). Each is the bundle PrusaSlicer ships in its own repository at that release tag, AGPL-3.0 like this package, with the release's built-in defaults from its source. |
+| `releases` | Only in the top `index.json`: every Snapmaker Orca release the package holds, newest first. Each has `version`, `application` and `path`, the folder it's in (`.` for the top one, `releases/<version>` for the others). |
 
 **`data/profiles/<id>.json`**: `id` and `displayName`; `printer` (its `id`, `printableArea`, `extruderClearanceRadius`, `highFlowSupported` and the stock `machineSettings`); `baselineProjectSettings`, the profile's stock print settings; `filamentShape`, the layout filament settings are written in; and `highFlowOverrides`, the speeds the profile uses with high-flow hotends (empty when it has none).
 
@@ -32,11 +37,11 @@ To try your own profiles, edit a copy of these files and point `--profiles-dir`,
 
 ## Where the data comes from
 
-The profiles are Snapmaker's own stock U1 presets at the Snapmaker Orca release named in `data/index.json` (`source`: repository, release tag and commit). `data/index.json` also lists the filament presets Snapmaker installs for each nozzle size, which the Snapmaker and Generic filament naming options use, so they only ever write a preset Snapmaker Orca has. The maintainers update the catalog when Snapmaker publishes a new release.
+The profiles are Snapmaker's own stock U1 presets at each Snapmaker Orca release the catalog holds (each index's `source`: repository, release tag and commit). `data/index.json` also lists the filament presets Snapmaker installs for each nozzle size, which the Snapmaker and Generic filament naming options use, so they only ever write a preset Snapmaker Orca has. The maintainers add a release when Snapmaker publishes one; it becomes the default, and the earlier ones stay available.
 
 ## Changing the data
 
-`data/` is built from `templates/` (the settings files) and `catalog.json` (which templates make up which profile, plus retired ids). To change a profile, edit those and rebuild (`high_flow.json` and `filament_names.json` are generated by the maintainers from Snapmaker's release; open an issue for those instead):
+`data/` is built from `releases/<version>/`, one folder per Snapmaker Orca release, each with its `templates/` (the settings files) and `catalog.json` (which templates make up which profile, plus retired ids). To change a profile, edit those and rebuild (`high_flow.json` and `filament_names.json` are generated by the maintainers from Snapmaker's release; open an issue for those instead):
 
 ```sh
 npm run generate -w any2orca-profiles   # rebuild data/

package/data/index.json

@@ -1,10 +1,10 @@
 {
   "schema": 1,
-  "dataVersion": "0.1.0",
+  "dataVersion": "0.3.0",
   "slicer": {
     "name": "Snapmaker Orca",
-    "version": "2.4.0",
-    "application": "Snapmaker_Orca-2.4.0"
+    "version": "2.4.1",
+    "application": "Snapmaker_Orca-2.4.1"
   },
   "defaultProfileId": "snapmaker-u1-0.4-standard",
   "printers": [
@@ -291,14 +291,14 @@
   ],
   "source": {
     "repository": "Snapmaker/OrcaSlicer",
-    "tag": "v2.4.0",
-    "commit": "b1831e5dcb464172de33783142425aafda834fbc"
+    "tag": "v2.4.1",
+    "commit": "bac6fd5c1e1c23ddf057cf6471ba4ed7ed621c4c"
   },
   "filamentNames": {
     "profileSet": {
       "repository": "Snapmaker/OrcaSlicer",
-      "version": "02.03.03.03",
-      "commit": "b1831e5dcb464172de33783142425aafda834fbc"
+      "version": "02.03.04.04",
+      "commit": "bac6fd5c1e1c23ddf057cf6471ba4ed7ed621c4c"
     },
     "materialAliases": {
       "PETG-HF": "PETG",
@@ -1284,5 +1284,101 @@
         }
       }
     }
+  },
+  "releases": [
+    {
+      "version": "2.4.1",
+      "application": "Snapmaker_Orca-2.4.1",
+      "path": "."
+    },
+    {
+      "version": "2.4.0",
+      "application": "Snapmaker_Orca-2.4.0",
+      "path": "releases/2.4.0"
+    }
+  ],
+  "sources": {
+    "prusaslicer": [
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.2.0.json",
+        "slicerVersion": "2.2.0",
+        "configVersion": "1.1.2",
+        "slicerTag": "version_2.2.0"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.3.1.json",
+        "slicerVersion": "2.3.1",
+        "configVersion": "1.2.4",
+        "slicerTag": "version_2.3.1"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.4.0.json",
+        "slicerVersion": "2.4.0",
+        "configVersion": "1.4.0",
+        "slicerTag": "version_2.4.0"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.4.2.json",
+        "slicerVersion": "2.4.2",
+        "configVersion": "1.4.4",
+        "slicerTag": "version_2.4.2"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.6.0.json",
+        "slicerVersion": "2.6.0",
+        "configVersion": "1.9.1",
+        "slicerTag": "version_2.6.0"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.6.1.json",
+        "slicerVersion": "2.6.1",
+        "configVersion": "1.9.8",
+        "slicerTag": "version_2.6.1"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.7.0.json",
+        "slicerVersion": "2.7.0",
+        "configVersion": "1.11.2",
+        "slicerTag": "version_2.7.0"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.7.1.json",
+        "slicerVersion": "2.7.1",
+        "configVersion": "1.11.7",
+        "slicerTag": "version_2.7.1"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.8.1.json",
+        "slicerVersion": "2.8.1",
+        "configVersion": "2.1.0",
+        "slicerTag": "version_2.8.1"
+      },
+      {
+        "vendor": "PrusaResearch",
+        "name": "Prusa Research",
+        "path": "sources/prusaslicer/PrusaResearch-2.9.6.json",
+        "slicerVersion": "2.9.6",
+        "configVersion": "2.4.14",
+        "slicerTag": "version_2.9.6"
+      }
+    ]
   }
 }

package/data/profiles/snapmaker-u1-0.2-0.12std.json

@@ -178,7 +178,7 @@
         "30"
       ],
       "single_extruder_multi_material": "0",
-      "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
+      "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n    move_z = max_print_height;\n    if max_layer_z < ((max_print_height - z_offset) - 2) then\n        move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n    endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
       "wipe": [
         "1",
         "1",
@@ -186,8 +186,8 @@
         "1"
       ],
       "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
-      "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
-      "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
+      "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+      "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
       "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
       "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
       "machine_pause_gcode": "M600",
@@ -327,6 +327,7 @@
     "bed_mesh_probe_distance": "50,50",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
     "best_object_pos": "0.5,0.5",
+    "bottom_color_penetration_layers": "4",
     "bottom_shell_layers": "5",
     "bottom_shell_thickness": "0",
     "bottom_solid_infill_flow_ratio": "1",
@@ -352,7 +353,7 @@
       "0"
     ],
     "change_extrusion_role_gcode": "",
-    "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
+    "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n    move_z = max_print_height;\n    if max_layer_z < ((max_print_height - z_offset) - 2) then\n        move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n    endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
     "close_fan_the_first_x_layers": [
       "1"
     ],
@@ -430,6 +431,8 @@
     ],
     "enable_prime_tower": "1",
     "enable_support": "0",
+    "enable_tower_interface_cooldown_during_tower": "0",
+    "enable_tower_interface_features": "0",
     "enforce_support_layers": "0",
     "eng_plate_temp": [
       "45"
@@ -472,6 +475,9 @@
     ],
     "fan_speedup_overhangs": "1",
     "fan_speedup_time": "0",
+    "filament_adhesiveness_category": [
+      "100"
+    ],
     "filament_colour": [
       "#F2754E"
     ],
@@ -614,6 +620,15 @@
     "filament_toolchange_delay": [
       "0"
     ],
+    "filament_tower_interface_pre_extrusion_dist": [
+      "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+      "0"
+    ],
+    "filament_tower_interface_print_temp": [
+      "-1"
+    ],
     "filament_tower_ironing_area": [
       "4"
     ],
@@ -630,6 +645,9 @@
       "snapmaker"
     ],
     "filament_volume_type": [
+      "standard",
+      "standard",
+      "standard",
       "standard"
     ],
     "filament_wipe": [
@@ -644,12 +662,14 @@
     "filament_z_hop_types": [
       "Slope Lift"
     ],
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "fill_multiline": "1",
     "filter_out_gap_fill": "0",
     "first_layer_print_sequence": [
       "0"
     ],
+    "first_layer_travel_acceleration": "100%",
+    "first_layer_travel_jerk": "100%",
     "flush_into_infill": "0",
     "flush_into_objects": "0",
     "flush_into_support": "1",
@@ -814,7 +834,7 @@
       "0",
       "0"
     ],
-    "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
+    "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
     "machine_load_filament_time": "0",
     "machine_max_acceleration_e": [
       "5000",
@@ -889,14 +909,14 @@
       "0"
     ],
     "machine_pause_gcode": "M600",
-    "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+    "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
     "machine_tool_change_time": "5",
     "machine_unload_filament_time": "0",
     "make_overhang_printable": "0",
     "make_overhang_printable_angle": "55",
     "make_overhang_printable_hole_size": "0",
     "manual_filament_change": "0",
-    "max_bridge_length": "10",
+    "max_bridge_length": "0",
     "max_layer_height": [
       "0.14",
       "0.14",
@@ -1023,6 +1043,7 @@
     "prime_tower_brim_chamfer": "1",
     "prime_tower_brim_chamfer_max_width": "4",
     "prime_tower_brim_width": "5",
+    "prime_tower_enable_framework": "0",
     "prime_tower_width": "28",
     "prime_volume": "27",
     "print_compatible_printers": [
@@ -1058,7 +1079,7 @@
     "raft_contact_distance": "0.1",
     "raft_expansion": "1.5",
     "raft_first_layer_density": "90%",
-    "raft_first_layer_expansion": "2",
+    "raft_first_layer_expansion": "-1",
     "raft_layers": "0",
     "ramming_line_width_ratio": "2",
     "ramming_pressure_advance_value": "0.02",
@@ -1254,6 +1275,7 @@
     "support_interface_bottom_layers": "2",
     "support_interface_filament": "0",
     "support_interface_loop_pattern": "0",
+    "support_interface_min_area": "0.25",
     "support_interface_not_for_body": "1",
     "support_interface_pattern": "auto",
     "support_interface_spacing": "0.5",
@@ -1281,6 +1303,11 @@
     "support_threshold_angle": "30",
     "support_threshold_overlap": "50%",
     "support_top_z_distance": "0.12",
+    "support_transition_flow_ratio": "1",
+    "support_transition_perimeter": "1",
+    "support_transition_speed": [
+      "50"
+    ],
     "support_type": "tree(auto)",
     "symmetric_infill_y_axis": "0",
     "temperature_vitrification": [
@@ -1308,6 +1335,7 @@
     "timelapse_type": "0",
     "tool_change_temprature_wait": "0",
     "top_bottom_infill_wall_overlap": "25%",
+    "top_color_penetration_layers": "6",
     "top_shell_layers": "7",
     "top_shell_thickness": "0.8",
     "top_solid_infill_flow_ratio": "1",
@@ -1343,7 +1371,7 @@
     "tree_support_angle_slow": "25",
     "tree_support_auto_brim": "1",
     "tree_support_branch_angle": "45",
-    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_angle_organic": "45",
     "tree_support_branch_diameter": "2",
     "tree_support_branch_diameter_angle": "5",
     "tree_support_branch_diameter_organic": "2",
@@ -1352,6 +1380,7 @@
     "tree_support_brim_width": "3",
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
+    "tree_support_transition_layers": "2",
     "tree_support_wall_count": "0",
     "upward_compatible_machine": [],
     "use_firmware_retraction": "0",
@@ -1433,7 +1462,7 @@
     ],
     "z_offset": "0",
     "from": "project",
-    "version": "2.4.0"
+    "version": "2.4.1"
   },
   "filamentShape": {
     "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1470,6 +1499,9 @@
     "enable_overhang_bridge_fan": [
       "1"
     ],
+    "filament_adhesiveness_category": [
+      "100"
+    ],
     "filament_diameter": [
       "1.75"
     ],
@@ -1766,6 +1798,15 @@
     ],
     "filament_unload_time": [
       "2"
+    ],
+    "filament_tower_interface_pre_extrusion_dist": [
+      "10"
+    ],
+    "filament_tower_interface_pre_extrusion_length": [
+      "0"
+    ],
+    "filament_tower_interface_print_temp": [
+      "-1"
     ]
   },
   "highFlowOverrides": {}