any2orca-profiles 0.1.0 → 0.3.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (52) hide show
  1. package/CHANGELOG.md +20 -0
  2. package/NOTICE +2 -2
  3. package/README.md +10 -5
  4. package/data/index.json +103 -7
  5. package/data/profiles/snapmaker-u1-0.2-0.12std.json +52 -11
  6. package/data/profiles/snapmaker-u1-0.2-hq.json +52 -11
  7. package/data/profiles/snapmaker-u1-0.2-standard.json +52 -11
  8. package/data/profiles/snapmaker-u1-0.4-0.08hq.json +49 -11
  9. package/data/profiles/snapmaker-u1-0.4-0.12fin.json +49 -11
  10. package/data/profiles/snapmaker-u1-0.4-0.16hq.json +49 -11
  11. package/data/profiles/snapmaker-u1-0.4-0.20hq.json +49 -11
  12. package/data/profiles/snapmaker-u1-0.4-0.28ed.json +49 -11
  13. package/data/profiles/snapmaker-u1-0.4-colormix.json +49 -11
  14. package/data/profiles/snapmaker-u1-0.4-draft.json +49 -11
  15. package/data/profiles/snapmaker-u1-0.4-standard.json +51 -13
  16. package/data/profiles/snapmaker-u1-0.6-0.18std.json +51 -16
  17. package/data/profiles/snapmaker-u1-0.6-fine.json +51 -16
  18. package/data/profiles/snapmaker-u1-0.6-standard.json +51 -16
  19. package/data/profiles/snapmaker-u1-0.8-0.32std.json +51 -16
  20. package/data/profiles/snapmaker-u1-0.8-0.40str.json +51 -16
  21. package/data/profiles/snapmaker-u1-0.8-fine.json +51 -16
  22. package/data/profiles/snapmaker-u1-0.8-standard.json +51 -16
  23. package/data/releases/2.4.0/index.json +1288 -0
  24. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-0.12std.json +1772 -0
  25. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-hq.json +1772 -0
  26. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-standard.json +1772 -0
  27. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.08hq.json +1843 -0
  28. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.12fin.json +1843 -0
  29. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.16hq.json +1843 -0
  30. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.20hq.json +1843 -0
  31. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.28ed.json +1843 -0
  32. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-colormix.json +1843 -0
  33. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-draft.json +1843 -0
  34. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-standard.json +1848 -0
  35. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-0.18std.json +1775 -0
  36. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-fine.json +1775 -0
  37. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-standard.json +1775 -0
  38. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.32std.json +1775 -0
  39. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.40str.json +1775 -0
  40. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-fine.json +1775 -0
  41. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-standard.json +1775 -0
  42. package/data/sources/prusaslicer/PrusaResearch-2.2.0.json +1921 -0
  43. package/data/sources/prusaslicer/PrusaResearch-2.3.1.json +2068 -0
  44. package/data/sources/prusaslicer/PrusaResearch-2.4.0.json +2201 -0
  45. package/data/sources/prusaslicer/PrusaResearch-2.4.2.json +2202 -0
  46. package/data/sources/prusaslicer/PrusaResearch-2.6.0.json +4885 -0
  47. package/data/sources/prusaslicer/PrusaResearch-2.6.1.json +5788 -0
  48. package/data/sources/prusaslicer/PrusaResearch-2.7.0.json +7406 -0
  49. package/data/sources/prusaslicer/PrusaResearch-2.7.1.json +7440 -0
  50. package/data/sources/prusaslicer/PrusaResearch-2.8.1.json +9447 -0
  51. package/data/sources/prusaslicer/PrusaResearch-2.9.6.json +11670 -0
  52. package/package.json +1 -1
package/data/profiles/snapmaker-u1-0.4-0.16hq.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -333,6 +333,7 @@
333
333
  "bed_mesh_probe_distance": "50,50",
334
334
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
335
335
  "best_object_pos": "0.5,0.5",
336
+ "bottom_color_penetration_layers": "4",
336
337
  "bottom_shell_layers": "4",
337
338
  "bottom_shell_thickness": "0",
338
339
  "bottom_solid_infill_flow_ratio": "1",
@@ -360,7 +361,7 @@
360
361
  "0"
361
362
  ],
362
363
  "change_extrusion_role_gcode": "",
363
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
364
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
364
365
  "close_fan_the_first_x_layers": [
365
366
  "1"
366
367
  ],
@@ -443,6 +444,8 @@
443
444
  ],
444
445
  "enable_prime_tower": "1",
445
446
  "enable_support": "0",
447
+ "enable_tower_interface_cooldown_during_tower": "0",
448
+ "enable_tower_interface_features": "0",
446
449
  "enforce_support_layers": "0",
447
450
  "eng_plate_temp": [
448
451
  "60"
@@ -488,6 +491,9 @@
488
491
  ],
489
492
  "fan_speedup_overhangs": "1",
490
493
  "fan_speedup_time": "0",
494
+ "filament_adhesiveness_category": [
495
+ "100"
496
+ ],
491
497
  "filament_colour": [
492
498
  "#F2754E"
493
499
  ],
@@ -641,6 +647,15 @@
641
647
  "filament_toolchange_delay": [
642
648
  "0"
643
649
  ],
650
+ "filament_tower_interface_pre_extrusion_dist": [
651
+ "10"
652
+ ],
653
+ "filament_tower_interface_pre_extrusion_length": [
654
+ "0"
655
+ ],
656
+ "filament_tower_interface_print_temp": [
657
+ "-1"
658
+ ],
644
659
  "filament_tower_ironing_area": [
645
660
  "4"
646
661
  ],
@@ -673,12 +688,14 @@
673
688
  "Slope Lift",
674
689
  "Slope Lift"
675
690
  ],
676
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
691
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
677
692
  "fill_multiline": "1",
678
693
  "filter_out_gap_fill": "0",
679
694
  "first_layer_print_sequence": [
680
695
  "0"
681
696
  ],
697
+ "first_layer_travel_acceleration": "100%",
698
+ "first_layer_travel_jerk": "100%",
682
699
  "flush_into_infill": "0",
683
700
  "flush_into_objects": "0",
684
701
  "flush_into_support": "1",
@@ -857,7 +874,7 @@
857
874
  "0",
858
875
  "0"
859
876
  ],
860
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
877
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
861
878
  "machine_load_filament_time": "0",
862
879
  "machine_max_acceleration_e": [
863
880
  "5000",
@@ -932,14 +949,14 @@
932
949
  "0"
933
950
  ],
934
951
  "machine_pause_gcode": "M600",
935
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
952
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
936
953
  "machine_tool_change_time": "5",
937
954
  "machine_unload_filament_time": "0",
938
955
  "make_overhang_printable": "0",
939
956
  "make_overhang_printable_angle": "55",
940
957
  "make_overhang_printable_hole_size": "0",
941
958
  "manual_filament_change": "0",
942
- "max_bridge_length": "10",
959
+ "max_bridge_length": "0",
943
960
  "max_layer_height": [
944
961
  "0.32",
945
962
  "0.32",
@@ -1078,6 +1095,7 @@
1078
1095
  "prime_tower_brim_chamfer": "1",
1079
1096
  "prime_tower_brim_chamfer_max_width": "4",
1080
1097
  "prime_tower_brim_width": "5",
1098
+ "prime_tower_enable_framework": "0",
1081
1099
  "prime_tower_width": "30",
1082
1100
  "prime_volume": "36",
1083
1101
  "print_compatible_printers": [
@@ -1115,7 +1133,7 @@
1115
1133
  "raft_contact_distance": "0.1",
1116
1134
  "raft_expansion": "1.5",
1117
1135
  "raft_first_layer_density": "90%",
1118
- "raft_first_layer_expansion": "2",
1136
+ "raft_first_layer_expansion": "-1",
1119
1137
  "raft_layers": "0",
1120
1138
  "ramming_line_width_ratio": "2",
1121
1139
  "ramming_pressure_advance_value": "0.02",
@@ -1317,6 +1335,7 @@
1317
1335
  "support_interface_bottom_layers": "2",
1318
1336
  "support_interface_filament": "0",
1319
1337
  "support_interface_loop_pattern": "0",
1338
+ "support_interface_min_area": "0.25",
1320
1339
  "support_interface_not_for_body": "1",
1321
1340
  "support_interface_pattern": "auto",
1322
1341
  "support_interface_spacing": "0.5",
@@ -1346,6 +1365,11 @@
1346
1365
  "support_threshold_angle": "30",
1347
1366
  "support_threshold_overlap": "50%",
1348
1367
  "support_top_z_distance": "0.16",
1368
+ "support_transition_flow_ratio": "1",
1369
+ "support_transition_perimeter": "1",
1370
+ "support_transition_speed": [
1371
+ "50"
1372
+ ],
1349
1373
  "support_type": "tree(auto)",
1350
1374
  "symmetric_infill_y_axis": "0",
1351
1375
  "temperature_vitrification": [
@@ -1373,6 +1397,7 @@
1373
1397
  "timelapse_type": "0",
1374
1398
  "tool_change_temprature_wait": "0",
1375
1399
  "top_bottom_infill_wall_overlap": "25%",
1400
+ "top_color_penetration_layers": "6",
1376
1401
  "top_shell_layers": "6",
1377
1402
  "top_shell_thickness": "1",
1378
1403
  "top_solid_infill_flow_ratio": "1",
@@ -1414,7 +1439,7 @@
1414
1439
  "tree_support_angle_slow": "25",
1415
1440
  "tree_support_auto_brim": "1",
1416
1441
  "tree_support_branch_angle": "45",
1417
- "tree_support_branch_angle_organic": "40",
1442
+ "tree_support_branch_angle_organic": "45",
1418
1443
  "tree_support_branch_diameter": "2",
1419
1444
  "tree_support_branch_diameter_angle": "5",
1420
1445
  "tree_support_branch_diameter_organic": "2",
@@ -1423,6 +1448,7 @@
1423
1448
  "tree_support_brim_width": "3",
1424
1449
  "tree_support_tip_diameter": "0.8",
1425
1450
  "tree_support_top_rate": "30%",
1451
+ "tree_support_transition_layers": "2",
1426
1452
  "tree_support_wall_count": "0",
1427
1453
  "upward_compatible_machine": [],
1428
1454
  "use_firmware_retraction": "0",
@@ -1504,7 +1530,7 @@
1504
1530
  ],
1505
1531
  "z_offset": "0",
1506
1532
  "from": "project",
1507
- "version": "2.4.0"
1533
+ "version": "2.4.1"
1508
1534
  },
1509
1535
  "filamentShape": {
1510
1536
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1541,6 +1567,9 @@
1541
1567
  "enable_overhang_bridge_fan": [
1542
1568
  "1"
1543
1569
  ],
1570
+ "filament_adhesiveness_category": [
1571
+ "100"
1572
+ ],
1544
1573
  "filament_diameter": [
1545
1574
  "1.75"
1546
1575
  ],
@@ -1837,6 +1866,15 @@
1837
1866
  ],
1838
1867
  "filament_unload_time": [
1839
1868
  "2"
1869
+ ],
1870
+ "filament_tower_interface_pre_extrusion_dist": [
1871
+ "10"
1872
+ ],
1873
+ "filament_tower_interface_pre_extrusion_length": [
1874
+ "0"
1875
+ ],
1876
+ "filament_tower_interface_print_temp": [
1877
+ "-1"
1840
1878
  ]
1841
1879
  },
1842
1880
  "highFlowOverrides": {}
package/data/profiles/snapmaker-u1-0.4-0.20hq.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -333,6 +333,7 @@
333
333
  "bed_mesh_probe_distance": "50,50",
334
334
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
335
335
  "best_object_pos": "0.5,0.5",
336
+ "bottom_color_penetration_layers": "3",
336
337
  "bottom_shell_layers": "3",
337
338
  "bottom_shell_thickness": "0",
338
339
  "bottom_solid_infill_flow_ratio": "1",
@@ -360,7 +361,7 @@
360
361
  "0"
361
362
  ],
362
363
  "change_extrusion_role_gcode": "",
363
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
364
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
364
365
  "close_fan_the_first_x_layers": [
365
366
  "1"
366
367
  ],
@@ -443,6 +444,8 @@
443
444
  ],
444
445
  "enable_prime_tower": "1",
445
446
  "enable_support": "0",
447
+ "enable_tower_interface_cooldown_during_tower": "0",
448
+ "enable_tower_interface_features": "0",
446
449
  "enforce_support_layers": "0",
447
450
  "eng_plate_temp": [
448
451
  "60"
@@ -488,6 +491,9 @@
488
491
  ],
489
492
  "fan_speedup_overhangs": "1",
490
493
  "fan_speedup_time": "0",
494
+ "filament_adhesiveness_category": [
495
+ "100"
496
+ ],
491
497
  "filament_colour": [
492
498
  "#F2754E"
493
499
  ],
@@ -641,6 +647,15 @@
641
647
  "filament_toolchange_delay": [
642
648
  "0"
643
649
  ],
650
+ "filament_tower_interface_pre_extrusion_dist": [
651
+ "10"
652
+ ],
653
+ "filament_tower_interface_pre_extrusion_length": [
654
+ "0"
655
+ ],
656
+ "filament_tower_interface_print_temp": [
657
+ "-1"
658
+ ],
644
659
  "filament_tower_ironing_area": [
645
660
  "4"
646
661
  ],
@@ -673,12 +688,14 @@
673
688
  "Slope Lift",
674
689
  "Slope Lift"
675
690
  ],
676
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
691
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
677
692
  "fill_multiline": "1",
678
693
  "filter_out_gap_fill": "0",
679
694
  "first_layer_print_sequence": [
680
695
  "0"
681
696
  ],
697
+ "first_layer_travel_acceleration": "100%",
698
+ "first_layer_travel_jerk": "100%",
682
699
  "flush_into_infill": "0",
683
700
  "flush_into_objects": "0",
684
701
  "flush_into_support": "1",
@@ -857,7 +874,7 @@
857
874
  "0",
858
875
  "0"
859
876
  ],
860
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
877
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
861
878
  "machine_load_filament_time": "0",
862
879
  "machine_max_acceleration_e": [
863
880
  "5000",
@@ -932,14 +949,14 @@
932
949
  "0"
933
950
  ],
934
951
  "machine_pause_gcode": "M600",
935
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
952
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n\n{endif} \nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
936
953
  "machine_tool_change_time": "5",
937
954
  "machine_unload_filament_time": "0",
938
955
  "make_overhang_printable": "0",
939
956
  "make_overhang_printable_angle": "55",
940
957
  "make_overhang_printable_hole_size": "0",
941
958
  "manual_filament_change": "0",
942
- "max_bridge_length": "10",
959
+ "max_bridge_length": "0",
943
960
  "max_layer_height": [
944
961
  "0.32",
945
962
  "0.32",
@@ -1078,6 +1095,7 @@
1078
1095
  "prime_tower_brim_chamfer": "1",
1079
1096
  "prime_tower_brim_chamfer_max_width": "4",
1080
1097
  "prime_tower_brim_width": "5",
1098
+ "prime_tower_enable_framework": "0",
1081
1099
  "prime_tower_width": "30",
1082
1100
  "prime_volume": "45",
1083
1101
  "print_compatible_printers": [
@@ -1115,7 +1133,7 @@
1115
1133
  "raft_contact_distance": "0.1",
1116
1134
  "raft_expansion": "1.5",
1117
1135
  "raft_first_layer_density": "90%",
1118
- "raft_first_layer_expansion": "2",
1136
+ "raft_first_layer_expansion": "-1",
1119
1137
  "raft_layers": "0",
1120
1138
  "ramming_line_width_ratio": "2",
1121
1139
  "ramming_pressure_advance_value": "0.02",
@@ -1317,6 +1335,7 @@
1317
1335
  "support_interface_bottom_layers": "2",
1318
1336
  "support_interface_filament": "0",
1319
1337
  "support_interface_loop_pattern": "0",
1338
+ "support_interface_min_area": "0.25",
1320
1339
  "support_interface_not_for_body": "1",
1321
1340
  "support_interface_pattern": "auto",
1322
1341
  "support_interface_spacing": "0.5",
@@ -1346,6 +1365,11 @@
1346
1365
  "support_threshold_angle": "30",
1347
1366
  "support_threshold_overlap": "50%",
1348
1367
  "support_top_z_distance": "0.2",
1368
+ "support_transition_flow_ratio": "1",
1369
+ "support_transition_perimeter": "1",
1370
+ "support_transition_speed": [
1371
+ "50"
1372
+ ],
1349
1373
  "support_type": "tree(auto)",
1350
1374
  "symmetric_infill_y_axis": "0",
1351
1375
  "temperature_vitrification": [
@@ -1373,6 +1397,7 @@
1373
1397
  "timelapse_type": "0",
1374
1398
  "tool_change_temprature_wait": "0",
1375
1399
  "top_bottom_infill_wall_overlap": "25%",
1400
+ "top_color_penetration_layers": "5",
1376
1401
  "top_shell_layers": "5",
1377
1402
  "top_shell_thickness": "1",
1378
1403
  "top_solid_infill_flow_ratio": "1",
@@ -1414,7 +1439,7 @@
1414
1439
  "tree_support_angle_slow": "25",
1415
1440
  "tree_support_auto_brim": "1",
1416
1441
  "tree_support_branch_angle": "45",
1417
- "tree_support_branch_angle_organic": "40",
1442
+ "tree_support_branch_angle_organic": "45",
1418
1443
  "tree_support_branch_diameter": "2",
1419
1444
  "tree_support_branch_diameter_angle": "5",
1420
1445
  "tree_support_branch_diameter_organic": "2",
@@ -1423,6 +1448,7 @@
1423
1448
  "tree_support_brim_width": "3",
1424
1449
  "tree_support_tip_diameter": "0.8",
1425
1450
  "tree_support_top_rate": "30%",
1451
+ "tree_support_transition_layers": "2",
1426
1452
  "tree_support_wall_count": "0",
1427
1453
  "upward_compatible_machine": [],
1428
1454
  "use_firmware_retraction": "0",
@@ -1504,7 +1530,7 @@
1504
1530
  ],
1505
1531
  "z_offset": "0",
1506
1532
  "from": "project",
1507
- "version": "2.4.0"
1533
+ "version": "2.4.1"
1508
1534
  },
1509
1535
  "filamentShape": {
1510
1536
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1541,6 +1567,9 @@
1541
1567
  "enable_overhang_bridge_fan": [
1542
1568
  "1"
1543
1569
  ],
1570
+ "filament_adhesiveness_category": [
1571
+ "100"
1572
+ ],
1544
1573
  "filament_diameter": [
1545
1574
  "1.75"
1546
1575
  ],
@@ -1837,6 +1866,15 @@
1837
1866
  ],
1838
1867
  "filament_unload_time": [
1839
1868
  "2"
1869
+ ],
1870
+ "filament_tower_interface_pre_extrusion_dist": [
1871
+ "10"
1872
+ ],
1873
+ "filament_tower_interface_pre_extrusion_length": [
1874
+ "0"
1875
+ ],
1876
+ "filament_tower_interface_print_temp": [
1877
+ "-1"
1840
1878
  ]
1841
1879
  },
1842
1880
  "highFlowOverrides": {}