any2orca-profiles 0.1.0 → 0.3.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (52) hide show
  1. package/CHANGELOG.md +20 -0
  2. package/NOTICE +2 -2
  3. package/README.md +10 -5
  4. package/data/index.json +103 -7
  5. package/data/profiles/snapmaker-u1-0.2-0.12std.json +52 -11
  6. package/data/profiles/snapmaker-u1-0.2-hq.json +52 -11
  7. package/data/profiles/snapmaker-u1-0.2-standard.json +52 -11
  8. package/data/profiles/snapmaker-u1-0.4-0.08hq.json +49 -11
  9. package/data/profiles/snapmaker-u1-0.4-0.12fin.json +49 -11
  10. package/data/profiles/snapmaker-u1-0.4-0.16hq.json +49 -11
  11. package/data/profiles/snapmaker-u1-0.4-0.20hq.json +49 -11
  12. package/data/profiles/snapmaker-u1-0.4-0.28ed.json +49 -11
  13. package/data/profiles/snapmaker-u1-0.4-colormix.json +49 -11
  14. package/data/profiles/snapmaker-u1-0.4-draft.json +49 -11
  15. package/data/profiles/snapmaker-u1-0.4-standard.json +51 -13
  16. package/data/profiles/snapmaker-u1-0.6-0.18std.json +51 -16
  17. package/data/profiles/snapmaker-u1-0.6-fine.json +51 -16
  18. package/data/profiles/snapmaker-u1-0.6-standard.json +51 -16
  19. package/data/profiles/snapmaker-u1-0.8-0.32std.json +51 -16
  20. package/data/profiles/snapmaker-u1-0.8-0.40str.json +51 -16
  21. package/data/profiles/snapmaker-u1-0.8-fine.json +51 -16
  22. package/data/profiles/snapmaker-u1-0.8-standard.json +51 -16
  23. package/data/releases/2.4.0/index.json +1288 -0
  24. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-0.12std.json +1772 -0
  25. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-hq.json +1772 -0
  26. package/data/releases/2.4.0/profiles/snapmaker-u1-0.2-standard.json +1772 -0
  27. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.08hq.json +1843 -0
  28. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.12fin.json +1843 -0
  29. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.16hq.json +1843 -0
  30. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.20hq.json +1843 -0
  31. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-0.28ed.json +1843 -0
  32. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-colormix.json +1843 -0
  33. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-draft.json +1843 -0
  34. package/data/releases/2.4.0/profiles/snapmaker-u1-0.4-standard.json +1848 -0
  35. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-0.18std.json +1775 -0
  36. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-fine.json +1775 -0
  37. package/data/releases/2.4.0/profiles/snapmaker-u1-0.6-standard.json +1775 -0
  38. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.32std.json +1775 -0
  39. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-0.40str.json +1775 -0
  40. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-fine.json +1775 -0
  41. package/data/releases/2.4.0/profiles/snapmaker-u1-0.8-standard.json +1775 -0
  42. package/data/sources/prusaslicer/PrusaResearch-2.2.0.json +1921 -0
  43. package/data/sources/prusaslicer/PrusaResearch-2.3.1.json +2068 -0
  44. package/data/sources/prusaslicer/PrusaResearch-2.4.0.json +2201 -0
  45. package/data/sources/prusaslicer/PrusaResearch-2.4.2.json +2202 -0
  46. package/data/sources/prusaslicer/PrusaResearch-2.6.0.json +4885 -0
  47. package/data/sources/prusaslicer/PrusaResearch-2.6.1.json +5788 -0
  48. package/data/sources/prusaslicer/PrusaResearch-2.7.0.json +7406 -0
  49. package/data/sources/prusaslicer/PrusaResearch-2.7.1.json +7440 -0
  50. package/data/sources/prusaslicer/PrusaResearch-2.8.1.json +9447 -0
  51. package/data/sources/prusaslicer/PrusaResearch-2.9.6.json +11670 -0
  52. package/package.json +1 -1
package/data/profiles/snapmaker-u1-0.2-hq.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -327,6 +327,7 @@
327
327
  "bed_mesh_probe_distance": "50,50",
328
328
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
329
329
  "best_object_pos": "0.5,0.5",
330
+ "bottom_color_penetration_layers": "5",
330
331
  "bottom_shell_layers": "5",
331
332
  "bottom_shell_thickness": "0",
332
333
  "bottom_solid_infill_flow_ratio": "1",
@@ -352,7 +353,7 @@
352
353
  "0"
353
354
  ],
354
355
  "change_extrusion_role_gcode": "",
355
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
356
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
356
357
  "close_fan_the_first_x_layers": [
357
358
  "1"
358
359
  ],
@@ -430,6 +431,8 @@
430
431
  ],
431
432
  "enable_prime_tower": "1",
432
433
  "enable_support": "0",
434
+ "enable_tower_interface_cooldown_during_tower": "0",
435
+ "enable_tower_interface_features": "0",
433
436
  "enforce_support_layers": "0",
434
437
  "eng_plate_temp": [
435
438
  "45"
@@ -472,6 +475,9 @@
472
475
  ],
473
476
  "fan_speedup_overhangs": "1",
474
477
  "fan_speedup_time": "0",
478
+ "filament_adhesiveness_category": [
479
+ "100"
480
+ ],
475
481
  "filament_colour": [
476
482
  "#F2754E"
477
483
  ],
@@ -614,6 +620,15 @@
614
620
  "filament_toolchange_delay": [
615
621
  "0"
616
622
  ],
623
+ "filament_tower_interface_pre_extrusion_dist": [
624
+ "10"
625
+ ],
626
+ "filament_tower_interface_pre_extrusion_length": [
627
+ "0"
628
+ ],
629
+ "filament_tower_interface_print_temp": [
630
+ "-1"
631
+ ],
617
632
  "filament_tower_ironing_area": [
618
633
  "4"
619
634
  ],
@@ -630,6 +645,9 @@
630
645
  "snapmaker"
631
646
  ],
632
647
  "filament_volume_type": [
648
+ "standard",
649
+ "standard",
650
+ "standard",
633
651
  "standard"
634
652
  ],
635
653
  "filament_wipe": [
@@ -644,12 +662,14 @@
644
662
  "filament_z_hop_types": [
645
663
  "Slope Lift"
646
664
  ],
647
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
665
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
648
666
  "fill_multiline": "1",
649
667
  "filter_out_gap_fill": "0",
650
668
  "first_layer_print_sequence": [
651
669
  "0"
652
670
  ],
671
+ "first_layer_travel_acceleration": "100%",
672
+ "first_layer_travel_jerk": "100%",
653
673
  "flush_into_infill": "0",
654
674
  "flush_into_objects": "0",
655
675
  "flush_into_support": "1",
@@ -814,7 +834,7 @@
814
834
  "0",
815
835
  "0"
816
836
  ],
817
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
837
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
818
838
  "machine_load_filament_time": "0",
819
839
  "machine_max_acceleration_e": [
820
840
  "5000",
@@ -889,14 +909,14 @@
889
909
  "0"
890
910
  ],
891
911
  "machine_pause_gcode": "M600",
892
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
912
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
893
913
  "machine_tool_change_time": "5",
894
914
  "machine_unload_filament_time": "0",
895
915
  "make_overhang_printable": "0",
896
916
  "make_overhang_printable_angle": "55",
897
917
  "make_overhang_printable_hole_size": "0",
898
918
  "manual_filament_change": "0",
899
- "max_bridge_length": "10",
919
+ "max_bridge_length": "0",
900
920
  "max_layer_height": [
901
921
  "0.14",
902
922
  "0.14",
@@ -1023,6 +1043,7 @@
1023
1043
  "prime_tower_brim_chamfer": "1",
1024
1044
  "prime_tower_brim_chamfer_max_width": "4",
1025
1045
  "prime_tower_brim_width": "5",
1046
+ "prime_tower_enable_framework": "0",
1026
1047
  "prime_tower_width": "30",
1027
1048
  "prime_volume": "18",
1028
1049
  "print_compatible_printers": [
@@ -1058,7 +1079,7 @@
1058
1079
  "raft_contact_distance": "0.1",
1059
1080
  "raft_expansion": "1.5",
1060
1081
  "raft_first_layer_density": "90%",
1061
- "raft_first_layer_expansion": "2",
1082
+ "raft_first_layer_expansion": "-1",
1062
1083
  "raft_layers": "0",
1063
1084
  "ramming_line_width_ratio": "2",
1064
1085
  "ramming_pressure_advance_value": "0.02",
@@ -1254,6 +1275,7 @@
1254
1275
  "support_interface_bottom_layers": "2",
1255
1276
  "support_interface_filament": "0",
1256
1277
  "support_interface_loop_pattern": "0",
1278
+ "support_interface_min_area": "0.25",
1257
1279
  "support_interface_not_for_body": "1",
1258
1280
  "support_interface_pattern": "auto",
1259
1281
  "support_interface_spacing": "0.5",
@@ -1281,6 +1303,11 @@
1281
1303
  "support_threshold_angle": "30",
1282
1304
  "support_threshold_overlap": "50%",
1283
1305
  "support_top_z_distance": "0.08",
1306
+ "support_transition_flow_ratio": "1",
1307
+ "support_transition_perimeter": "1",
1308
+ "support_transition_speed": [
1309
+ "50"
1310
+ ],
1284
1311
  "support_type": "tree(auto)",
1285
1312
  "symmetric_infill_y_axis": "0",
1286
1313
  "temperature_vitrification": [
@@ -1308,6 +1335,7 @@
1308
1335
  "timelapse_type": "0",
1309
1336
  "tool_change_temprature_wait": "0",
1310
1337
  "top_bottom_infill_wall_overlap": "25%",
1338
+ "top_color_penetration_layers": "7",
1311
1339
  "top_shell_layers": "7",
1312
1340
  "top_shell_thickness": "0.8",
1313
1341
  "top_solid_infill_flow_ratio": "1",
@@ -1343,7 +1371,7 @@
1343
1371
  "tree_support_angle_slow": "25",
1344
1372
  "tree_support_auto_brim": "1",
1345
1373
  "tree_support_branch_angle": "45",
1346
- "tree_support_branch_angle_organic": "40",
1374
+ "tree_support_branch_angle_organic": "45",
1347
1375
  "tree_support_branch_diameter": "2",
1348
1376
  "tree_support_branch_diameter_angle": "5",
1349
1377
  "tree_support_branch_diameter_organic": "2",
@@ -1352,6 +1380,7 @@
1352
1380
  "tree_support_brim_width": "3",
1353
1381
  "tree_support_tip_diameter": "0.8",
1354
1382
  "tree_support_top_rate": "30%",
1383
+ "tree_support_transition_layers": "2",
1355
1384
  "tree_support_wall_count": "0",
1356
1385
  "upward_compatible_machine": [],
1357
1386
  "use_firmware_retraction": "0",
@@ -1433,7 +1462,7 @@
1433
1462
  ],
1434
1463
  "z_offset": "0",
1435
1464
  "from": "project",
1436
- "version": "2.4.0"
1465
+ "version": "2.4.1"
1437
1466
  },
1438
1467
  "filamentShape": {
1439
1468
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1470,6 +1499,9 @@
1470
1499
  "enable_overhang_bridge_fan": [
1471
1500
  "1"
1472
1501
  ],
1502
+ "filament_adhesiveness_category": [
1503
+ "100"
1504
+ ],
1473
1505
  "filament_diameter": [
1474
1506
  "1.75"
1475
1507
  ],
@@ -1766,6 +1798,15 @@
1766
1798
  ],
1767
1799
  "filament_unload_time": [
1768
1800
  "2"
1801
+ ],
1802
+ "filament_tower_interface_pre_extrusion_dist": [
1803
+ "10"
1804
+ ],
1805
+ "filament_tower_interface_pre_extrusion_length": [
1806
+ "0"
1807
+ ],
1808
+ "filament_tower_interface_print_temp": [
1809
+ "-1"
1769
1810
  ]
1770
1811
  },
1771
1812
  "highFlowOverrides": {}
package/data/profiles/snapmaker-u1-0.2-standard.json CHANGED
@@ -178,7 +178,7 @@
178
178
  "30"
179
179
  ],
180
180
  "single_extruder_multi_material": "0",
181
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
181
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
182
182
  "wipe": [
183
183
  "1",
184
184
  "1",
@@ -186,8 +186,8 @@
186
186
  "1"
187
187
  ],
188
188
  "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
189
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
189
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
190
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
191
191
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
192
192
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
193
193
  "machine_pause_gcode": "M600",
@@ -327,6 +327,7 @@
327
327
  "bed_mesh_probe_distance": "50,50",
328
328
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
329
329
  "best_object_pos": "0.5,0.5",
330
+ "bottom_color_penetration_layers": "5",
330
331
  "bottom_shell_layers": "5",
331
332
  "bottom_shell_thickness": "0",
332
333
  "bottom_solid_infill_flow_ratio": "1",
@@ -352,7 +353,7 @@
352
353
  "0"
353
354
  ],
354
355
  "change_extrusion_role_gcode": "",
355
- "change_filament_gcode": ";===== date: 20251213=====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
356
+ "change_filament_gcode": ";===== date: 20261003 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n move_z = max_print_height;\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\n\"G90\nG1 Z\" + move_z + \" F600\n\";\n\nelse\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\nendif\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M104 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M104 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}",
356
357
  "close_fan_the_first_x_layers": [
357
358
  "1"
358
359
  ],
@@ -430,6 +431,8 @@
430
431
  ],
431
432
  "enable_prime_tower": "1",
432
433
  "enable_support": "0",
434
+ "enable_tower_interface_cooldown_during_tower": "0",
435
+ "enable_tower_interface_features": "0",
433
436
  "enforce_support_layers": "0",
434
437
  "eng_plate_temp": [
435
438
  "45"
@@ -472,6 +475,9 @@
472
475
  ],
473
476
  "fan_speedup_overhangs": "1",
474
477
  "fan_speedup_time": "0",
478
+ "filament_adhesiveness_category": [
479
+ "100"
480
+ ],
475
481
  "filament_colour": [
476
482
  "#F2754E"
477
483
  ],
@@ -614,6 +620,15 @@
614
620
  "filament_toolchange_delay": [
615
621
  "0"
616
622
  ],
623
+ "filament_tower_interface_pre_extrusion_dist": [
624
+ "10"
625
+ ],
626
+ "filament_tower_interface_pre_extrusion_length": [
627
+ "0"
628
+ ],
629
+ "filament_tower_interface_print_temp": [
630
+ "-1"
631
+ ],
617
632
  "filament_tower_ironing_area": [
618
633
  "4"
619
634
  ],
@@ -630,6 +645,9 @@
630
645
  "snapmaker"
631
646
  ],
632
647
  "filament_volume_type": [
648
+ "standard",
649
+ "standard",
650
+ "standard",
633
651
  "standard"
634
652
  ],
635
653
  "filament_wipe": [
@@ -644,12 +662,14 @@
644
662
  "filament_z_hop_types": [
645
663
  "Slope Lift"
646
664
  ],
647
- "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
665
+ "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
648
666
  "fill_multiline": "1",
649
667
  "filter_out_gap_fill": "0",
650
668
  "first_layer_print_sequence": [
651
669
  "0"
652
670
  ],
671
+ "first_layer_travel_acceleration": "100%",
672
+ "first_layer_travel_jerk": "100%",
653
673
  "flush_into_infill": "0",
654
674
  "flush_into_objects": "0",
655
675
  "flush_into_support": "1",
@@ -814,7 +834,7 @@
814
834
  "0",
815
835
  "0"
816
836
  ],
817
- "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
837
+ "machine_end_gcode": ";===== date: 20261003 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = 0.0;\nmove_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP",
818
838
  "machine_load_filament_time": "0",
819
839
  "machine_max_acceleration_e": [
820
840
  "5000",
@@ -889,14 +909,14 @@
889
909
  "0"
890
910
  ],
891
911
  "machine_pause_gcode": "M600",
892
- "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
912
+ "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=48 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=45 ALARM_TEMP=51 FAN_SPEED=0.6 DELAY_OFF=0\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\n\n;==== 预挤出耗材 =====\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nT{initial_extruder}\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder]}\nSM_PRINT_PREEXTRUDE_FILAMENT INDEX={initial_extruder}\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nM107\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nM107\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nM106 S255\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\nM107\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\nM107\n{if curr_bed_type==\"Smooth PEI Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{elsif curr_bed_type==\"Graphic Effect Plate\"} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07 \n{else} \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
893
913
  "machine_tool_change_time": "5",
894
914
  "machine_unload_filament_time": "0",
895
915
  "make_overhang_printable": "0",
896
916
  "make_overhang_printable_angle": "55",
897
917
  "make_overhang_printable_hole_size": "0",
898
918
  "manual_filament_change": "0",
899
- "max_bridge_length": "10",
919
+ "max_bridge_length": "0",
900
920
  "max_layer_height": [
901
921
  "0.14",
902
922
  "0.14",
@@ -1023,6 +1043,7 @@
1023
1043
  "prime_tower_brim_chamfer": "1",
1024
1044
  "prime_tower_brim_chamfer_max_width": "4",
1025
1045
  "prime_tower_brim_width": "5",
1046
+ "prime_tower_enable_framework": "0",
1026
1047
  "prime_tower_width": "28",
1027
1048
  "prime_volume": "25",
1028
1049
  "print_compatible_printers": [
@@ -1058,7 +1079,7 @@
1058
1079
  "raft_contact_distance": "0.1",
1059
1080
  "raft_expansion": "1.5",
1060
1081
  "raft_first_layer_density": "90%",
1061
- "raft_first_layer_expansion": "2",
1082
+ "raft_first_layer_expansion": "-1",
1062
1083
  "raft_layers": "0",
1063
1084
  "ramming_line_width_ratio": "2",
1064
1085
  "ramming_pressure_advance_value": "0.02",
@@ -1254,6 +1275,7 @@
1254
1275
  "support_interface_bottom_layers": "2",
1255
1276
  "support_interface_filament": "0",
1256
1277
  "support_interface_loop_pattern": "0",
1278
+ "support_interface_min_area": "0.25",
1257
1279
  "support_interface_not_for_body": "1",
1258
1280
  "support_interface_pattern": "auto",
1259
1281
  "support_interface_spacing": "0.5",
@@ -1281,6 +1303,11 @@
1281
1303
  "support_threshold_angle": "30",
1282
1304
  "support_threshold_overlap": "50%",
1283
1305
  "support_top_z_distance": "0.1",
1306
+ "support_transition_flow_ratio": "1",
1307
+ "support_transition_perimeter": "1",
1308
+ "support_transition_speed": [
1309
+ "50"
1310
+ ],
1284
1311
  "support_type": "tree(auto)",
1285
1312
  "symmetric_infill_y_axis": "0",
1286
1313
  "temperature_vitrification": [
@@ -1308,6 +1335,7 @@
1308
1335
  "timelapse_type": "0",
1309
1336
  "tool_change_temprature_wait": "0",
1310
1337
  "top_bottom_infill_wall_overlap": "25%",
1338
+ "top_color_penetration_layers": "7",
1311
1339
  "top_shell_layers": "7",
1312
1340
  "top_shell_thickness": "0.8",
1313
1341
  "top_solid_infill_flow_ratio": "1",
@@ -1343,7 +1371,7 @@
1343
1371
  "tree_support_angle_slow": "25",
1344
1372
  "tree_support_auto_brim": "1",
1345
1373
  "tree_support_branch_angle": "45",
1346
- "tree_support_branch_angle_organic": "40",
1374
+ "tree_support_branch_angle_organic": "45",
1347
1375
  "tree_support_branch_diameter": "2",
1348
1376
  "tree_support_branch_diameter_angle": "5",
1349
1377
  "tree_support_branch_diameter_organic": "2",
@@ -1352,6 +1380,7 @@
1352
1380
  "tree_support_brim_width": "3",
1353
1381
  "tree_support_tip_diameter": "0.8",
1354
1382
  "tree_support_top_rate": "30%",
1383
+ "tree_support_transition_layers": "2",
1355
1384
  "tree_support_wall_count": "0",
1356
1385
  "upward_compatible_machine": [],
1357
1386
  "use_firmware_retraction": "0",
@@ -1433,7 +1462,7 @@
1433
1462
  ],
1434
1463
  "z_offset": "0",
1435
1464
  "from": "project",
1436
- "version": "2.4.0"
1465
+ "version": "2.4.1"
1437
1466
  },
1438
1467
  "filamentShape": {
1439
1468
  "name": "Snapmaker PLA SnapSpeed @U1",
@@ -1470,6 +1499,9 @@
1470
1499
  "enable_overhang_bridge_fan": [
1471
1500
  "1"
1472
1501
  ],
1502
+ "filament_adhesiveness_category": [
1503
+ "100"
1504
+ ],
1473
1505
  "filament_diameter": [
1474
1506
  "1.75"
1475
1507
  ],
@@ -1766,6 +1798,15 @@
1766
1798
  ],
1767
1799
  "filament_unload_time": [
1768
1800
  "2"
1801
+ ],
1802
+ "filament_tower_interface_pre_extrusion_dist": [
1803
+ "10"
1804
+ ],
1805
+ "filament_tower_interface_pre_extrusion_length": [
1806
+ "0"
1807
+ ],
1808
+ "filament_tower_interface_print_temp": [
1809
+ "-1"
1769
1810
  ]
1770
1811
  },
1771
1812
  "highFlowOverrides": {}