@zwave-js/config 8.9.1 → 8.10.0

package/config/devices/0x014a/tstat-tbz500.json

@@ -1,12 +1,13 @@
 {
 	"manufacturer": "Ecolink",
 	"manufacturerId": "0x014a",
-	"label": "TBH500",
+	"label": "TBZ500",
 	"description": "Z-Wave Smart Thermostat",
 	"devices": [
 		{
 			"productType": "0x5442",
-			"productId": "0x5439"
+			"productId": "0x5439",
+			"zwaveAllianceId": 4093
 		}
 	],
 	"firmwareVersion": {
@@ -74,19 +75,19 @@
 		},
 		{
 			"#": "4",
-			"label": "2nd Stage Heat",
-			"$import": "~/templates/master_template.json#base_enable_disable"
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "2nd Stage Heat"
 		},
 		{
 			"#": "5",
-			"label": "Aux Heat",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Aux Heat",
 			"defaultValue": 1
 		},
 		{
 			"#": "6",
-			"label": "2nd Stage Cool",
-			"$import": "~/templates/master_template.json#base_enable_disable"
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "2nd Stage Cool"
 		},
 		{
 			"#": "7",
@@ -110,8 +111,8 @@
 		{
 			"#": "8",
 			"label": "Minimum Off Time",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 5,
 			"maxValue": 9,
 			"defaultValue": 5
@@ -119,8 +120,8 @@
 		{
 			"#": "9",
 			"label": "Minimum Run Time",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 3,
 			"maxValue": 9,
 			"defaultValue": 3
@@ -129,8 +130,8 @@
 			"#": "10",
 			"label": "Setpoint Heat/Cool Delta",
 			"description": "Sets the minimum separation between heating and cooling setpoints.",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 3,
 			"maxValue": 15,
 			"defaultValue": 3
@@ -139,8 +140,8 @@
 			"#": "11",
 			"label": "Heating Stage 1: On Delta",
 			"description": "Stage 1 starts heating when current temperature is <Heating Stage 1: On Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 1,
 			"maxValue": 6,
 			"defaultValue": 1
@@ -149,8 +150,8 @@
 			"#": "12",
 			"label": "Heating Stage 1: Off Delta",
 			"description": "Stage 1 stops heating when current temperature is <Heating Stage 1: Off Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 5,
 			"defaultValue": 0
@@ -159,8 +160,8 @@
 			"#": "13",
 			"label": "Heating Stage 2: On Delta",
 			"description": "Stage 2 starts heating when current temperature is <Heating Stage 2: On Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 2,
 			"maxValue": 7,
 			"defaultValue": 2
@@ -169,8 +170,8 @@
 			"#": "14",
 			"label": "Heating Stage 2: Off Delta",
 			"description": "Stage 2 stops heating when current temperature is <Heating Stage 2: Off Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 6,
 			"defaultValue": 0
@@ -179,8 +180,8 @@
 			"#": "15",
 			"label": "Heating Stage 3: On Delta",
 			"description": "Stage 3 starts heating when current temperature is <Heating Stage 3: On Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 3,
 			"maxValue": 8,
 			"defaultValue": 3
@@ -189,8 +190,8 @@
 			"#": "16",
 			"label": "Heating Stage 3: Off Delta",
 			"description": "Stage 3 stops heating when current temperature is <Heating Stage 3: Off Delta> degrees below <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 7,
 			"defaultValue": 0
@@ -199,8 +200,8 @@
 			"#": "17",
 			"label": "Cooling Stage 1: On Delta",
 			"description": "Stage 1 starts cooling when current temperature is <Cooling Stage 1: On Delta> degrees above <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 1,
 			"maxValue": 7,
 			"defaultValue": 1
@@ -209,8 +210,8 @@
 			"#": "18",
 			"label": "Cooling Stage 1: Off Delta",
 			"description": "Stage 1 stops cooling when current temperature is <Cooling Stage 1: Off Delta> degrees above <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 6,
 			"defaultValue": 0
@@ -219,8 +220,8 @@
 			"#": "19",
 			"label": "Cooling Stage 2: On Delta",
 			"description": "Stage 2 starts cooling when current temperature is <Cooling Stage 2: On Delta> degrees above <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 2,
 			"maxValue": 8,
 			"defaultValue": 2
@@ -229,8 +230,8 @@
 			"#": "20",
 			"label": "Cooling Stage 2: Off Delta",
 			"description": "Stage 2 stops cooling when current temperature is <Cooling Stage 2: Off Delta> degrees above <Setpoint>",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 7,
 			"defaultValue": 0
@@ -323,93 +324,93 @@
 		},
 		{
 			"#": "23[0x0001]",
-			"label": "Send Status Change Report: Temperature",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Temperature",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0002]",
-			"label": "Send Status Change Report: Heat Setpoint",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Heat Setpoint",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0004]",
-			"label": "Send Status Change Report: Cool Setpoint",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Cool Setpoint",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0008]",
-			"label": "Send Status Change Report: Mode",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Mode",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0010]",
-			"label": "Send Status Change Report: Fan Mode",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Fan Mode",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0020]",
-			"label": "Send Status Change Report: Fan State",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Fan State",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x0040]",
-			"label": "Send Status Change Report: Operating State",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Operating State",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x0080]",
-			"label": "Send Status Change Report: Schedule Enable",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Schedule Enable",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x0100]",
-			"label": "Send Status Change Report: Setback",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Setback",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x0200]",
-			"label": "Send Status Change Report: Run Hold",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Run Hold",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x0400]",
-			"label": "Send Status Change Report: Display Lock",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Display Lock",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x2000]",
-			"label": "Send Status Change Report: Battery",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Battery",
 			"valueSize": 2,
 			"defaultValue": 1
 		},
 		{
 			"#": "23[0x4000]",
-			"label": "Send Status Change Report: Mechanical Status",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: Mechanical Status",
 			"valueSize": 2
 		},
 		{
 			"#": "23[0x8000]",
-			"label": "Send Status Change Report: SCP Status",
 			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Status Change Report: SCP Status",
 			"valueSize": 2
 		},
 		{
@@ -434,8 +435,8 @@
 		{
 			"#": "26",
 			"label": "Backlight Timer",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 10,
 			"maxValue": 30,
 			"defaultValue": 20
@@ -443,8 +444,8 @@
 		{
 			"#": "33",
 			"label": "Max Heat Setpoint",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 30,
 			"maxValue": 109,
 			"defaultValue": 90
@@ -452,16 +453,16 @@
 		{
 			"#": "34",
 			"label": "Min Cool Setpoint",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 33,
 			"maxValue": 112,
 			"defaultValue": 60
 		},
 		{
 			"#": "38",
-			"label": "Schedule",
-			"$import": "~/templates/master_template.json#base_enable_disable"
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Schedule"
 		},
 		{
 			"#": "40",
@@ -485,8 +486,8 @@
 		{
 			"#": "41",
 			"label": "Unoccupied Heat Setpoint",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 30,
 			"maxValue": 109,
 			"defaultValue": 62
@@ -494,8 +495,8 @@
 		{
 			"#": "42",
 			"label": "Unoccupied Cool Setpoint",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 33,
 			"maxValue": 112,
 			"defaultValue": 80
@@ -519,8 +520,8 @@
 		{
 			"#": "46",
 			"label": "Remote Sensor Temperature",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 0,
 			"maxValue": 112,
 			"defaultValue": 0,
@@ -529,8 +530,8 @@
 		{
 			"#": "48",
 			"label": "Internal Sensor Temp Offset",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": -7,
 			"maxValue": 7,
 			"defaultValue": 0
@@ -538,8 +539,8 @@
 		{
 			"#": "49",
 			"label": "Remote Sensor Temperature Offset",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": -7,
 			"maxValue": 7,
 			"defaultValue": 0
@@ -547,8 +548,8 @@
 		{
 			"#": "52",
 			"label": "Filter Timer",
-			"unit": "hours",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 4000,
 			"defaultValue": 0
@@ -556,8 +557,8 @@
 		{
 			"#": "53",
 			"label": "Filter Timer Max",
-			"unit": "hours",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 4000,
 			"defaultValue": 300
@@ -565,8 +566,8 @@
 		{
 			"#": "54",
 			"label": "Heat Timer",
-			"unit": "hours",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 4000,
 			"defaultValue": 0
@@ -574,8 +575,8 @@
 		{
 			"#": "55",
 			"label": "Cool Timer",
-			"unit": "hours",
 			"valueSize": 2,
+			"unit": "hours",
 			"minValue": 0,
 			"maxValue": 4000,
 			"defaultValue": 0
@@ -583,8 +584,8 @@
 		{
 			"#": "61",
 			"label": "Fan Purge Heat",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 90,
 			"defaultValue": 0
@@ -592,18 +593,17 @@
 		{
 			"#": "62",
 			"label": "Fan Purge Cool",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 90,
 			"defaultValue": 0
 		},
-		// Technical Parameters 170-178 have not been included, as they would be useful only in detailed debugging situations.
 		{
 			"#": "179",
 			"label": "Battery",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 100,
 			"readOnly": true
@@ -611,8 +611,8 @@
 		{
 			"#": "181",
 			"label": "Battery Stat Shutdown Threshold",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 50,
 			"defaultValue": 0
@@ -620,8 +620,8 @@
 		{
 			"#": "182",
 			"label": "Battery Radio Cutoff Threshold",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 10,
 			"maxValue": 50,
 			"defaultValue": 10
@@ -629,8 +629,8 @@
 		{
 			"#": "183",
 			"label": "Battery LOWBATT Indicator Threshold",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 20,
 			"maxValue": 75,
 			"defaultValue": 20
@@ -638,8 +638,8 @@
 		{
 			"#": "184",
 			"label": "Battery Value for Midlevel",
-			"unit": "%",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 50,
 			"maxValue": 80,
 			"defaultValue": 50
@@ -647,8 +647,8 @@
 		{
 			"#": "185",
 			"label": "Battery Report Timer",
-			"unit": "days",
 			"valueSize": 1,
+			"unit": "days",
 			"minValue": 0,
 			"maxValue": 10,
 			"defaultValue": 1,
@@ -663,8 +663,8 @@
 			"#": "186",
 			"label": "Temperature Reporting Threshold",
 			"description": "Required change to trigger update",
-			"unit": "°F",
 			"valueSize": 1,
+			"unit": "°F",
 			"minValue": 1,
 			"maxValue": 5,
 			"defaultValue": 2
@@ -672,8 +672,8 @@
 		{
 			"#": "187",
 			"label": "Temperature Report Interval",
-			"unit": "minutes",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 0,
 			"maxValue": 120,
 			"defaultValue": 0,
@@ -684,7 +684,6 @@
 				}
 			]
 		},
-		// Technical Parameters 188-230 have not been included, as they would be useful only in detailed debugging situations.
 		{
 			"#": "231",
 			"label": "Status Display",
@@ -704,5 +703,11 @@
 				}
 			]
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "1. Follow the instructions provided with your system for enrolling the thermostat.\n2. Press and hold the FAN button on the Thermostat until the screen changes to the Menu screen.\n3. Press the UP button until ZWAVE is shown in the Status Display line then press Select.\n4. INSTALL should be shown on the status line.\n5. When instructed by your system installation to add the thermostat to the network press the “Select” button to install. Wait until SUCCESS or FAILED is shown on thestatus display.\n6. Press Done on the Thermostat to exit the ZWAVE screen.\n7. Press Done on the Thermostat again to exit the Menu screen.\n8. Once enrolled on your system’s network, continue to follow the instructions provided to complete the enrollment and naming of the thermostat.\n9. The indicator should be shown on the Thermostat Main screen indicating the thermostat has successfully been enrolled into the Z-Wave network.",
+		"exclusion": "It may be necessary to remove and/or reinstall the thermostat from a Z-Wave network if the thermostat has been previously installed on another network. Follow the instructions supplied with your Z-Wave system to remove/uninstall a Z-Wave device. When the system instructs you to press and release the Z-Wave button on the thermostat, follow these steps:\n\n1. Press and hold the FAN button for 3 seconds until the Menu screen is displayed.\n2. Press the UP arrow button to scroll to the “ZWAVE” menu.\n3. Press “Select” to select the ZWAVE screen.\n4. The display will show “REMOVE” in the text line.\n5. Press “Select” to perform the remove action.\n6. “WAIT” will be displayed in the text line. The remove operation is in process.\n7. “SUCCESS” will be display when the thermostat has been excluded from the network.\n8. Press “Done” to exit back to the thermostat screen.\n9. Thermostat is now ready to be added to any Z-Wave network.",
+		"reset": "Please use this procedure only when the Z-Wave Primary Controller is missing or otherwise inoperable. To reset the TBZ500’s Z-Wave parameters to Factory Settings (both Z-Wave and HVAC settings): 1. Remove power from the TBZ500. 2. Restore power to the TBZ500. 3. When “TBZ500” appears on the screen, hold down the MODE and FAN buttons at the same time. 4. Release the buttons when RESET appears on the Status Line. 5. Once the TBZ500 resets the Z-Wave and HVAC settings, a DONE confirmation message will appear on the screen before the thermostat self-reboots",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4093/TBZ500_manual_8_5x5_5_inch__SC_20210325.pdf"
+	}
 }

package/config/devices/0x014f/el-sc-100.json

@@ -1,13 +1,13 @@
 {
 	"manufacturer": "Nortek Security & Control LLC",
 	"manufacturerId": "0x014f",
-	"label": "EL-SC-100",
+	"label": "EL-SC-100 / EL-SC-300",
 	"description": "Elan System Controller",
 	"devices": [
 		{
 			"productType": "0x5343",
 			"productId": "0x5a57",
-			"zwaveAllianceId": 4030
+			"zwaveAllianceId": [4030, 4083]
 		}
 	],
 	"firmwareVersion": {
@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator\n\n2. Management View: Network Management\n\n3. Network Action: Reset\n\n4. Execute (button to right of Network action)",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4030/10024269_Rev-C_Quick_Start_Guide_EL_SC-100_WEB.pdf"
+		"reset": "1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or\nInput/Output Tabs in Configurator 2. Management View: Network Management 3. Network Action: Reset 4.\nExecute (button to right of Network action)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4083/10024525_Rev-B_Literature_Quick_Installation_Guide_System_Controller_Elan_EL-SC-300.pdf"
 	}
 }

package/config/devices/0x0156/m_n_kp01.json

@@ -0,0 +1,108 @@
+{
+	"manufacturer": "Vivint",
+	"manufacturerId": "0x0156",
+	"label": "KP01",
+	"description": "Z-Wave Secondary Keypad",
+	"devices": [
+		{
+			"productType": "0x4b50",
+			"productId": "0x0001",
+			"zwaveAllianceId": 4119
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Motion Detector",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable ",
+					"value": 0
+				},
+				{
+					"label": "Enable ",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "Sound",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Downcast Light",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Transmission Retry Limit",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 10,
+			"defaultValue": 3,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "Battery Check Interval",
+			"valueSize": 2,
+			"unit": "minutes",
+			"minValue": 5,
+			"maxValue": 1440,
+			"defaultValue": 70,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Use this standard method for adding Z-Wave devices at the panel or hub. Use the \"PAIR/RESET\" button next to the battery tray. Follow the onscreen prompts to add the keypad.",
+		"exclusion": "Removing Keypad from System\nTo remove the device, place the panel Use this standard method for excluding Z-Wave devices at the panel or hub. Use the \"PAIR/RESET\" button next to the battery tray. Follow the onscreen prompts to add the keypad",
+		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable.\nTo restore the keypad to factory settings which removes it from any network as well: \n1. Locate the button labeled Pair/Reset underneath the back battery cover. \n2. Insert a paperclip into the hole until you feel the button depress. \n3. Hold the button down for ten seconds. The green downcast indicator will blink rapidly while the reset button is pressed and go out after ten seconds. \n4. The device’s downcast indicator will turn red when the reset operation is complete. The device is now ready to be added back to a Z-Wave network.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4119/Quick_Reference_Vivint_Keypad%20-%20DRAFT--%20for%20testing%20and%20review%20-%20working%20file%20Rev006.pdf"
+	}
+}