@zwave-js/config 8.9.1 → 8.10.0

package/config/devices/0x0450/h3ps-wc1.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Rent Café",
+	"manufacturerId": "0x0450",
+	"label": "H3PS-WC1",
+	"description": "HomeIQ Hub",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0001",
+			"zwaveAllianceId": 4299
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "Using the console application you can execute the “Network-Reset” command to factory reset the Z-Wave controller",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4299/Yardi_Hub_Manual_Console.pdf"
+	}
+}

package/config/devices/0x0452/u-bolt-pro-zwave.json

@@ -0,0 +1,30 @@
+{
+	"manufacturer": "Ultraloq",
+	"manufacturerId": "0x0452",
+	"label": "U-BOLT-PRO-ZWAVE",
+	"description": "U-Bolt Pro Z-Wave Smart Lock",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0001",
+			"zwaveAllianceId": [4115, 4179]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"inclusion": "Step1\nSet the Z-Wave network main controller or hub into inclusion mode.\n\nStep2\nPress the button 5 on the lock keypad, until you hear beep sound and the indicator light flashes blue. \nIf your Z-Wave hub is Security 2 enabled and requires the Z-Wave QR code or pin code to add the lock automatically, please find it on the back of the battery cover of your smart lock.\n\nStep3\nFollow the instructions of your Z-Wave hub to finish the inclusion process",
+		"exclusion": "Step1\nSet the Z-Wave network main controller or hub into exclusion mode.\n\nStep2\nPress the button 5 on the lock keypad, until you hear the beep sound and the indicator light flashes red. \n\nStep3\nFollow the instructions of your Z-Wave hub to finish the exclusion process",
+		"reset": "CAUTION: Resetting a Z-Wave device without notifying the hub may cause performance problems. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable.\n\nIf you are using U-tec App as Owner, please click “Delete and Reset” to remove the lock from your U-tec Account, then use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.\n\nIf U-Bolt Pro Z-Wave is working as Standalone Mode without the App, please use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4115/U-Bolt%20Pro%20Z-Wave%20QuickGuide%20V1.4%20成品95x210cm(出血98mmx216mm)%2080g%20双胶纸%20共42P%20骑马钉装订.pdf"
+	}
+}

package/config/devices/0x0454/v11-n13.json

@@ -0,0 +1,30 @@
+{
+	"manufacturer": "Sengled",
+	"manufacturerId": "0x0454",
+	"label": "V11-N13",
+	"description": "Smart LED Classic A19 CRI90",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0007",
+			"zwaveAllianceId": 4212
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"inclusion": "Power cycle Sengled Smart Z-Wave™ bulb once within 2 seconds and keep the bulb on, it can go to the Inclusion mode. Then enable the Inclusion command in app can add the bulb successfully. If you would like to stop the Inclusion mode, power off the bulb more than 8 seconds, then you power on it, it can go to SmartStart mode again",
+		"exclusion": "If you would like to remove the bulb from your app, keep your bulb online and light on, then click the Exclusion button on your app, and power cycle the desired bulb once and keep on, it will be deleted from app automatically. Note: the bulb that you want to delete should be within the required time. If you want to delete another device, you should try the same operation again",
+		"reset": "To reset your Smart Z-Wave™ bulb to factory mode, ensure that the bulb is on firstly, then quickly turn the bulb off and on at least 5 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash 3 times, and the device in app will be removed automatically. If it does not flash 3 times, you will have to try again. Once successfully reset, please try to pair it again",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4212/Z-Wave%20Plus™%20Sengled Smart LED User Guide --210803.pdf"
+	}
+}

package/config/devices/0x0456/homee-005.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Homee",
+	"manufacturerId": "0x0456",
+	"label": "HOMEE-005",
+	"description": "700 Series Cube",
+	"devices": [
+		{
+			"productType": "0x0013",
+			"productId": "0x3800",
+			"zwaveAllianceId": 4271
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "If the Z Wave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessar y after the reset to remove and add all of the nodes in the network.\nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4271/homee_zwave_pdf-komprimiert.pdf"
+	}
+}

package/config/devices/0x4118/tsm02.json

@@ -0,0 +1,122 @@
+// This is a copy of the variant with manufacturerId 0x0118
+// Apparently there is a typo in the firmware, so some devices identify as 0x4118.
+{
+	"manufacturer": "TKB Home",
+	"manufacturerId": "0x4118",
+	"label": "TSM02",
+	"description": "Slim Multi-Sensor",
+	"devices": [
+		{
+			"productType": "0x0002",
+			"productId": "0x0002",
+			"zwaveAllianceId": [838, 839]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Light Control",
+			"maxNodes": 7
+		},
+		"2": {
+			"label": "Reports",
+			"maxNodes": 7,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"label": "Basic Set Level",
+			"description": "Allowable range: 0-99, 255",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 255,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "PIR Sensitivity",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 70
+		},
+		{
+			"#": "4",
+			"label": "Light Threshold",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 100
+		},
+		{
+			"#": "5",
+			"label": "Operation Mode",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 127,
+			"defaultValue": 0
+		},
+		{
+			"#": "6",
+			"label": "Multi-Sensor Function Switch",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 127,
+			"defaultValue": 4
+		},
+		{
+			"#": "8",
+			"label": "PIR Re-Detect Interval Time",
+			"valueSize": 1,
+			"minValue": 3,
+			"maxValue": 127,
+			"defaultValue": 3
+		},
+		{
+			"#": "9",
+			"label": "Turn Off Light Time",
+			"valueSize": 1,
+			"minValue": 4,
+			"maxValue": 127,
+			"defaultValue": 4
+		},
+		{
+			"#": "10",
+			"label": "Auto Report Battery Time",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 12
+		},
+		{
+			"#": "11",
+			"label": "Auto Report Door/Window State Time",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 12
+		},
+		{
+			"#": "12",
+			"label": "Auto Report Illumination Time",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 12
+		},
+		{
+			"#": "13",
+			"label": "Auto Report Temperature Time",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 12
+		}
+	]
+}

package/config/devices/templates/master_template.json

@@ -126,6 +126,20 @@
 		"maxValue": 127,
 		"unsigned": true
 	},
+	"base_0-65535": {
+		"valueSize": 4,
+		"minValue": 0,
+		"maxValue": 65535,
+		"defaultValue": 0,
+		"unsigned": true
+	},
+	"base_1-65535": {
+		"valueSize": 4,
+		"minValue": 1,
+		"maxValue": 65535,
+		"defaultValue": 0,
+		"unsigned": true
+	},
 	"base_true_false": {
 		"valueSize": 1,
 		"minValue": 0,
@@ -145,13 +159,15 @@
 		]
 	},
 	"dimming_timing_with_0": {
-		"description": "Set 0 to disable",
-		"valueSize": 1,
+		"$import": "#base_0-255_nounit",
 		"unit": "10ms",
-		"minValue": 0,
-		"maxValue": 255,
 		"defaultValue": 3,
-		"unsigned": true
+		"options": [
+			{
+				"label": "Disable",
+				"value": 0
+			}
+		]
 	},
 	"dimming_timing": {
 		"valueSize": 1,
@@ -161,6 +177,56 @@
 		"defaultValue": 3,
 		"unsigned": true
 	},
+	"dimming_speed_1-99_seconds": {
+		"$import": "#base_1-99_nounit",
+		"label": "Dimming Speed",
+		"unit": "seconds",
+		"defaultValue": 5
+	},
+	"dim_rate": {
+		"$import": "#base_1-99_nounit",
+		"label": "Dimming rate"
+	},
+	"minimum_dim_level_0-99": {
+		"$import": "#base_0-99_nounit",
+		"label": "Minimum Dim Level",
+		"defaultValue": 1
+	},
+	"minimum_dim_level_1-99": {
+		"$import": "#base_1-99_nounit",
+		"label": "Minimum Dim Level",
+		"defaultValue": 1
+	},
+	"maximum_dim_level_0-99": {
+		"$import": "#base_0-99_nounit",
+		"label": "Maximum Dim Level",
+		"defaultValue": 99
+	},
+	"maximum_dim_level_0-100": {
+		"$import": "#base_0-100_nounit",
+		"label": "Maximum Dim Level",
+		"defaultValue": 100
+	},
+	"maximum_dim_level_1-99": {
+		"$import": "#base_1-99_nounit",
+		"label": "Maximum Dim Level",
+		"defaultValue": 99
+	},
+	"maximum_dim_level_1-100": {
+		"$import": "#base_1-100_nounit",
+		"label": "Maximum Dim Level",
+		"defaultValue": 100
+	},
+	"default_dim_level_0-99": {
+		"$import": "#base_0-99_nounit",
+		"label": "Default Dim Level",
+		"options": [
+			{
+				"label": "Last brightness level",
+				"value": 0
+			}
+		]
+	},
 	"orientation": {
 		"$import": "#base_enable_disable",
 		"label": "Inverted Orientation"
@@ -476,6 +542,10 @@
 			}
 		]
 	},
+	"enable_scene_control": {
+		"$import": "#base_enable_disable",
+		"label": "Scene Control"
+	},
 	"volume_three": {
 		"label": "Volume",
 		"valueSize": 1,
@@ -515,6 +585,24 @@
 			}
 		]
 	},
+	"temperature_scale_celsius_fahrenheit": {
+		"label": "Temperature Scale",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 1,
+		"defaultValue": 0,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Celsius",
+				"value": 0
+			},
+			{
+				"label": "Fahrenheit",
+				"value": 1
+			}
+		]
+	},
 	"clock_format": {
 		"label": "Clock Format",
 		"valueSize": 1,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "8.9.1",
+  "version": "8.10.0",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -40,8 +40,8 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "8.9.0",
-    "@zwave-js/shared": "8.9.0",
+    "@zwave-js/core": "8.10.0",
+    "@zwave-js/shared": "8.10.0",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.1",
     "fs-extra": "^10.0.0",
@@ -53,25 +53,25 @@
   "devDependencies": {
     "@types/fs-extra": "^9.0.13",
     "@types/jest": "^26.0.24",
-    "@types/js-levenshtein": "^1.1.0",
+    "@types/js-levenshtein": "^1.1.1",
     "@types/json-logic-js": "^1.2.1",
     "@types/node": "^15.12.5",
     "@types/pegjs": "^0.10.3",
     "@types/semver": "^7.3.9",
     "@types/xml2json": "^0.11.4",
-    "@types/yargs": "^17.0.7",
-    "@zwave-js/maintenance": "8.9.0",
+    "@types/yargs": "^17.0.8",
+    "@zwave-js/maintenance": "8.10.0",
     "axios": "^0.24.0",
     "comment-json": "^4.1.1",
     "esbuild": "*",
-    "esbuild-register": "^3.2.0",
+    "esbuild-register": "^3.3.1",
     "jest-extended": "^0.11.5",
     "js-levenshtein": "^1.1.6",
     "pegjs": "^0.10.0",
     "ts-pegjs": "^0.3.1",
-    "typescript": "4.5.2",
+    "typescript": "4.5.4",
     "xml2json": "^0.12.0",
-    "yargs": "^17.3.0"
+    "yargs": "^17.3.1"
   },
-  "gitHead": "3b6295a292e7e6f2ebd083949afa31448ec219a0"
+  "gitHead": "a2f936145db19ae5e7e90730a93723d1dd35ba47"
 }

package/config/devices/0x0090/892.json

@@ -1,170 +0,0 @@
-{
-	"manufacturer": "Spectrum Brands",
-	"manufacturerId": "0x0090",
-	"label": "892",
-	"description": "10 Button Z-Wave Plus v2 Deadbolt",
-	"devices": [
-		{
-			"productType": "0x0811",
-			"productId": "0x03a8",
-			"zwaveAllianceId": 4026
-		}
-	],
-	"firmwareVersion": {
-		"min": "0.0",
-		"max": "255.255"
-	},
-	"paramInformation": [
-		{
-			"#": "1",
-			"label": "Status LED",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "2",
-			"label": "Buzzer",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "3",
-			"label": "User Program Button",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "4",
-			"label": "Secure Screen",
-			"description": "Control the secure screen functionality (on touch locks only)",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "10",
-			"label": "Lock Direction",
-			"description": "Indicates the direction of the lock. Set to 1 (Right handed lock) to initiate direction detection.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Unknown latch position",
-					"value": 0
-				},
-				{
-					"label": "Right handed lock",
-					"value": 1
-				},
-				{
-					"label": "Left handed lock",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "40",
-			"label": "Reset to Factory Default Settings",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"writeOnly": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Operation",
-					"value": 0
-				},
-				{
-					"label": "Reset to Factory Defaults",
-					"value": 1
-				},
-				{
-					"label": "Perform a modified factory reset",
-					"value": 2
-				}
-			]
-		},
-		{
-			"#": "46",
-			"label": "Motor Resistance",
-			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 0,
-			"unsigned": true,
-			"readOnly": true
-		}
-	],
-	"metadata": {
-		"inclusion": "For classic inclusion, initiate the process to add the lock to your system at your smart home controller. When prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters inclusion mode. If successful, re-name the lock in your system. If unsuccessful, follow your system's instruction to remove the lock from the network, press button 'A' one time to remove, and then repeat the process",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button 'A' on the lock interior once",
-		"reset": "NOTICE: A factory reset will delete all user codes associated with the lock as well as removing it from your smart home system.\n1. Remove the battery pack\n2. Press and HOLD the program button while reinserting the battery pack.\n3. Continue to hold the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the program button once more. The LEDs will cycle flashing between red and green while the reset process is being performed. \n5. When complete, the lock will reset and initiate the door handing process",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4026/69369%20Rev%2002%20KS%20892_small1.pdf"
-	}
-}