@zwave-js/config 8.9.1 → 8.10.0

package/config/devices/0x0390/ah-hub3.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Alloy",
+	"manufacturerId": "0x0390",
+	"label": "AH-HUB3",
+	"description": "SmartHome Hub",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0001",
+			"zwaveAllianceId": 4077
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "To reset the Alloy SmartHome Hub to its factory settings, you will first need to remove all\ndevices. A ​ Factory reset​ button will then become visible. Pressing the ​ Factory reset​ button will immediately reset the Hub. The Hub will reboot.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in\nyour network being orphaned and it will be necessary after the reset to exclude and re-include\nall of the nodes in the network. If this controller is being used as a secondary controller in the\nnetwork, use this procedure to reset this controller only in the event that the network primary\ncontroller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4077/Alloy%20SmartHome%20Hub%20User%20Guide.pdf"
+	}
+}

package/config/devices/0x039a/INT-SMDWD-01.json

@@ -0,0 +1,99 @@
+{
+	"manufacturer": "Inteset",
+	"manufacturerId": "0x039a",
+	"label": "INT-SMDWD-01",
+	"description": "Inteset Door/Window Sensor",
+	"devices": [
+		{
+			"productType": "0x0003",
+			"productId": "0x0101"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Basic Set: Off Delay Time",
+			"unit": "seconds",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 0
+		},
+		{
+			"#": "2",
+			"label": "Basic Set: Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 100,
+			"options": [
+				{
+					"label": "Off",
+					"value": 0
+				},
+				{
+					"label": "On",
+					"value": 100
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "LED Indicator: Open/Close",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": " Binary Sensor Report",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Battery Report Interval",
+			"unit": "minutes",
+			"valueSize": 2,
+			"minValue": 1,
+			"maxValue": 1080,
+			"defaultValue": 480
+		}
+	],
+	"metadata": {
+		"wakeup": "Press the button briefly",
+		"inclusion": "Press the button 3 times within 1.5s to enter inclusion mode.",
+		"exclusion": "Press the button 3 times within 1.5s",
+		"reset": "Press and hold the button for 10s until LED light is on, then release the button.",
+		"manual": "http://downloads.inteset.com/DoorSensorManualS2.pdf"
+	}
+}

package/config/devices/0x041b/39455_zw4008.json

@@ -7,7 +7,7 @@
 		{
 			"productType": "0x4952",
 			"productId": "0x3036",
-			"zwaveAllianceId": 3835
+			"zwaveAllianceId": 4169
 		}
 	],
 	"firmwareVersion": {
@@ -34,7 +34,6 @@
 		{
 			"#": "3",
 			"label": "LED Light",
-			"description": "LED status when device on or off.",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
@@ -58,23 +57,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Invert Switch",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal Orientation",
-					"value": 0
-				},
-				{
-					"label": "Invert",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		},
 		{
 			"#": "19",
@@ -101,8 +84,9 @@
 		"treatBasicSetAsEvent": true
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a\ndevice to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top\nor bottom of the smart switch (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the\nQR code/security number on the back of the box, or the QR code label on\nthe product",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a\ndevice from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release\nthe top or bottom of the smart switch (rocker) to remove it from the\nnetwork",
-		"reset": "Quickly press ON (top) button three times, then, immediately press the OFF\n(bottom) button three times. The LED indicator will flash ON/OFF five times\nwhen completed successfully.\nNOTE: This should only be used in the event your network’s primary controller\nis missing or otherwise inoperable"
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart switch (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart switch (rocker) to remove it from the network",
+		"reset": "Quickly press ON (top) button three times, then, immediately press the OFF (bottom) button three times. The LED indicator will flash ON/OFF five times when completed successfully.\nNOTE: This should only be used in the event your network’s primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4169/39455_HQSG_v4.pdf"
 	}
 }

package/config/devices/0x0445/trf-zw10.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "URC Automation",
+	"manufacturerId": "0x0445",
+	"label": "TRF-ZW10",
+	"description": "Z-Wave Gateway",
+	"devices": [
+		{
+			"productType": "0x0020",
+			"productId": "0x0001",
+			"zwaveAllianceId": 4287
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "Resets the memory of the TRF-ZW10 to factory settings. All existing programming is erased. The gateway requires a download from the URC software in order to be programmed again.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo factory default the TRF-ZW10, turn the gateway over and locate the Reset button. Using a thin object, press and hold the button down for fifteen (15) seconds. \n\nWARNING! Only use this button when instructed by URC’s Technical Support team",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4287/URC_Total_Control_TRF-ZW10_OM_rev1.6_08132021.pdf"
+	}
+}

package/config/devices/0x0447/sqr14101_z.json

@@ -1,7 +1,7 @@
 {
 	"manufacturer": "Schneider Electric",
 	"manufacturerId": "0x0447",
-	"label": "SQR14101**Z",
+	"label": "SQR14101",
 	"description": "Z-Wave Switch Single Pole",
 	"devices": [
 		{
@@ -17,23 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "LED Indicator",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Power on, LED off; power off, LED on",
-					"value": 0
-				},
-				{
-					"label": "Power on, LED on;power off, LED off",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
 		}
 	],
 	"metadata": {

package/config/devices/0x0447/sqr14102_z.json

@@ -0,0 +1,52 @@
+{
+	"manufacturer": "Schneider Electric",
+	"manufacturerId": "0x0447",
+	"label": "SQR14102",
+	"description": "Z-Wave Plus Switch",
+	"devices": [
+		{
+			"productType": "0x000e",
+			"productId": "0x1106",
+			"zwaveAllianceId": 4110
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
+		},
+		{
+			"#": "2",
+			"$import": "~/0x0447/templates/schneider_template.json#delayed_off_time"
+		},
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "4",
+			"$import": "~/0x0447/templates/schneider_template.json#child_lock"
+		}
+	],
+	"metadata": {
+		"inclusion": "A. SmartStart inclusion: \nThe feature assumes the gateway has implemented SmartStart. Users could use the APP of the gateway or the gateway camera to scan the QR code on device or on device package before powering on the device, and then when the device is powered on, it shall be automatically added to the gateway.\n\nB. Manual inclusion (Figure 6): \nWhen the gateway is in adding mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself)",
+		"exclusion": "Exclusion from a Z-Wave network (Figure 6): \nWhen the gateway is in removing mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself)",
+		"reset": "Long press the reset button for >20 seconds till the blue LED blink 5 times within one second",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4110/GDE7798200_Z-Wave%20Plus%20Switch%20user%20manual_English%20version.pdf"
+	}
+}

package/config/devices/0x0447/sqr22101_z.json

@@ -1,7 +1,7 @@
 {
 	"manufacturer": "Schneider Electric",
 	"manufacturerId": "0x0447",
-	"label": "SQR22101**Z",
+	"label": "SQR22101",
 	"description": "Z-Wave Dimmer",
 	"devices": [
 		{
@@ -17,23 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "LED Indicator",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Power on, LED off; power off, LED on",
-					"value": 0
-				},
-				{
-					"label": "Power on, LED on; power off, LED off",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
 		}
 	],
 	"metadata": {

package/config/devices/0x0447/sqr22102_z.json

@@ -0,0 +1,74 @@
+{
+	"manufacturer": "Schneider Electric",
+	"manufacturerId": "0x0447",
+	"label": "SQR22102",
+	"description": "Z-Wave Plus Dimmer",
+	"devices": [
+		{
+			"productType": "0x000e",
+			"productId": "0x1202",
+			"zwaveAllianceId": 4180
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Dimmer Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
+		},
+		{
+			"#": "2",
+			"$import": "~/0x0447/templates/schneider_template.json#delayed_off_time"
+		},
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "4",
+			"$import": "~/0x0447/templates/schneider_template.json#child_lock"
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds",
+			"minValue": 0,
+			"maxValue": 180,
+			"defaultValue": 3
+		},
+		{
+			"#": "6",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Kickstart Mode",
+			"description": "Ensures lamp start-up even at low dim levels"
+		},
+		{
+			"#": "7",
+			"$import": "~/templates/master_template.json#minimum_dim_level_1-99",
+			"maxValue": 45
+		},
+		{
+			"#": "8",
+			"$import": "~/templates/master_template.json#maximum_dim_level_1-99",
+			"minValue": 55
+		}
+	],
+	"metadata": {
+		"inclusion": "Quick click x3, within 1.5s",
+		"exclusion": "Quick click x3, within 1.5s",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4180/GDE7797900_Z-Wave%20Plus%20dimmer%20user%20manual_English%20version_20210514.pdf"
+	}
+}

package/config/devices/0x0447/sqr44101_z.json

@@ -1,7 +1,7 @@
 {
 	"manufacturer": "Schneider Electric",
 	"manufacturerId": "0x0447",
-	"label": "SQR44101**Z",
+	"label": "SQR44101",
 	"description": "Z-Wave Receptacle",
 	"devices": [
 		{
@@ -17,23 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "LED Indicator",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Power on, LED off; power off, LED on",
-					"value": 0
-				},
-				{
-					"label": "Power on, LED on;power off, LED off",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
 		}
 	],
 	"metadata": {

package/config/devices/0x0447/sqr44102_z.json

@@ -0,0 +1,52 @@
+{
+	"manufacturer": "Schneider Electric",
+	"manufacturerId": "0x0447",
+	"label": "SQR44102",
+	"description": "Z-Wave Plus Receptacle",
+	"devices": [
+		{
+			"productType": "0x000e",
+			"productId": "0x1107",
+			"zwaveAllianceId": 4121
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
+		},
+		{
+			"#": "2",
+			"$import": "~/0x0447/templates/schneider_template.json#delayed_off_time"
+		},
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "4",
+			"$import": "~/0x0447/templates/schneider_template.json#child_lock"
+		}
+	],
+	"metadata": {
+		"inclusion": "A. SmartStart inclusion: The feature assumes the gateway has implemented SmartStart. Users could use the APP of the gateway or the gateway camera to scan the QR code on device or on the enclosed label inside the package before powering on the device, and then when the device is powered on, it shall be automatically added to the gateway.\n\nB. Manual inclusion (Figure 5): When the gateway is in adding mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself), press the program button 3 times within 1.5s (the interval between each press is less than 0.5s)",
+		"exclusion": "Exclusion from a Z-Wave network: When the gateway is in removing mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself), press the program button 3 times within 1.5s (the interval between each press is less than 0.5s)",
+		"reset": "Long press the reset button for >20 seconds till the blue LED blink 5 times within one second",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4121/GDE7798100_Z-Wave%20Plus%20Receptacle%20user%20manual_English%20version.pdf"
+	}
+}

package/config/devices/0x0447/sqr50101_z.json

@@ -0,0 +1,44 @@
+{
+	"manufacturer": "Schneider Electric",
+	"manufacturerId": "0x0447",
+	"label": "SQR50101",
+	"description": "Z-Wave Plus Auxiliary Switch",
+	"devices": [
+		{
+			"productType": "0x000e",
+			"productId": "0x1301",
+			"zwaveAllianceId": 4116
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Dimmer Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/0x0447/templates/schneider_template.json#child_lock"
+		}
+	],
+	"metadata": {
+		"inclusion": "A. SmartStart inclusion: The feature assumes the gateway has implemented SmartStart. Users could use the APP of the gateway or the gateway camera to scan the QR code on device or on the enclosed label inside the package before powering on the device, and then when the device is powered on, it shall be automatically added to the gateway.\nB. Manual inclusion (Figure 4): When the gateway is in adding mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself), quick click the upper paddle or lower paddle 3 times within 1.5 seconds",
+		"exclusion": "When the gateway is in removing mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself), quick click the upper paddle or lower paddle 3 times within 1.5 seconds",
+		"reset": "Reset to factory defaults (Figure 10):\nLong press the reset button for >20 seconds till the blue LED blink 5 times within one second.\nNOTE:\n• Use this procedure only when the Z-Wave gateway is missing or otherwise inoperable.\n• Reset the device to factory default settings will set the device to not in Z-Wave network state, delete the association setting and restore the configuration setting to the default",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4116/GDE77963_Z-Wave%20Plus%20Auxiliary%20Switch%20user%20manual_English%20version.pdf"
+	}
+}

package/config/devices/0x0447/sqr62101whz.json

@@ -17,23 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "LED Indicator",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Power on, LED off; power off, LED on",
-					"value": 0
-				},
-				{
-					"label": "Power on, LED on;power off, LED off",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
 		}
 	],
 	"metadata": {

package/config/devices/0x0447/sqr62102whz.json

@@ -0,0 +1,52 @@
+{
+	"manufacturer": "Schneider Electric",
+	"manufacturerId": "0x0447",
+	"label": "SQR62102WHZ",
+	"description": "Z-Wave Plus Plug-in",
+	"devices": [
+		{
+			"productType": "0x000e",
+			"productId": "0x1108",
+			"zwaveAllianceId": 4112
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
+		},
+		{
+			"#": "2",
+			"$import": "~/0x0447/templates/schneider_template.json#delayed_off_time"
+		},
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "4",
+			"$import": "~/0x0447/templates/schneider_template.json#child_lock"
+		}
+	],
+	"metadata": {
+		"inclusion": "A. SmartStart inclusion: The feature assumes the gateway has implemented SmartStart. Users could use the APP of the gateway or the gateway camera to scan the QR code (located on the device or on the enclosed label in the package) before powering on the device, and then when the device is powered on, it shall be automatically added to the gateway.\nB. Manual inclusion (Figure 4): When the gateway is in adding mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself). Press the program button 3 times within 1.5s (the interval between each press is less than 0.5s)",
+		"exclusion": "Exclusion from a Z-Wave network (Figure 4): When the gateway is in removing mode (please refer to the instruction of the Z-Wave gateway for the operations on gateway itself). Press the program button 3 times within 1.5s (the interval between each press is less than 0.5s)",
+		"reset": "Long press the reset button for >20 seconds till the blue LED blink 5 times within one second",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4112/GDE7798000_Z-Wave%20Plus%20Plug-in%20user%20manual_English%20version_20210514.pdf"
+	}
+}

package/config/devices/0x0447/templates/schneider_template.json

@@ -0,0 +1,15 @@
+{
+	"delayed_off_time": {
+		"label": "Delayed Off Time",
+		"valueSize": 1,
+		"unit": "seconds",
+		"minValue": 0,
+		"maxValue": 240,
+		"defaultValue": 0,
+		"unsigned": true
+	},
+	"child_lock": {
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"label": "Child Lockout Enable"
+	}
+}

package/config/devices/0x044f/uvh1301.json

@@ -0,0 +1,30 @@
+{
+	"manufacturer": "GE",
+	"manufacturerId": "0x044f",
+	"label": "UVH1301",
+	"description": "Kitchen Hub",
+	"devices": [
+		{
+			"productType": "0x1100",
+			"productId": "0x0001",
+			"zwaveAllianceId": 4285
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"inclusion": "Select \"Join Network\" in the app to put the kitchen hub into learn mode to join another network",
+		"exclusion": "Same as Inclusion",
+		"reset": "Factory Reset is available through the Settings menu in the app",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4285/zwave%20manual%20fixed.pdf"
+	}
+}