@torrent-tv/proxy 2.89.5 → 2.89.7

package/services/torrent/demand/pieces.js

@@ -1,140 +1,140 @@
-/**
- * @file The one place bytes become piece numbers.
- *
- * Everything else counts in bytes. A piece is what the protocol hashes and what
- * memory is allocated in, and nothing outside these functions should have to
- * know its length. Before 2026-09-02 the division was done in three places —
- * the memory allowance, the reader's window, the eviction ceiling — each
- * rounding down on its own, and the rounding was where a real failure lived:
- * with 16 MiB pieces a 64 MB allowance is four places while two readers asking
- * for 96 MB each want six, and the shortage was invisible because both figures
- * had already been floored.
- *
- * Pure arithmetic on numbers: no torrent, no file object, nothing to stub.
- */
-
-/**
- * The pieces that hold a byte range of a file.
- *
- * Inclusive at both ends, because a byte range that ends inside a piece still
- * needs that whole piece: the protocol delivers and verifies nothing smaller.
- *
- * @param {object} params
- * @param {number} params.fileOffset - Where the file starts within the torrent.
- * @param {number} params.byteStart - First byte wanted, relative to the file.
- * @param {number} params.byteEnd - Last byte wanted, relative to the file.
- * @param {number} params.pieceLength
- * @returns {{ from: number, to: number } | null} Null when the range is not a
- *   range, or the piece length is not usable.
- */
-export function piecesOf({ fileOffset, byteStart, byteEnd, pieceLength }) {
-  if (!Number.isFinite(pieceLength) || pieceLength <= 0) {
-    return null;
-  }
-  if (!Number.isFinite(fileOffset) || fileOffset < 0) {
-    return null;
-  }
-  if (!Number.isFinite(byteStart) || !Number.isFinite(byteEnd) || byteEnd < byteStart) {
-    return null;
-  }
-  return {
-    from: Math.floor((fileOffset + Math.max(0, byteStart)) / pieceLength),
-    to: Math.floor((fileOffset + byteEnd) / pieceLength)
-  };
-}
-
-/**
- * The bytes of a file that a piece range covers, clamped to the file.
- *
- * The inverse of {@link piecesOf}, and here for the same reason: a caller that
- * still thinks in pieces — the reader, which walks a file piece by piece
- * because that is what arrives — states its need in bytes like everyone else,
- * and the conversion stays in this one file rather than being written out
- * again at the boundary.
- *
- * @param {object} params
- * @param {number} params.fileOffset - Where the file starts within the torrent.
- * @param {number} params.fileLength
- * @param {number} params.from - First piece, inclusive.
- * @param {number} params.to - Last piece, inclusive.
- * @param {number} params.pieceLength
- * @returns {{ byteStart: number, byteEnd: number } | null}
- */
-export function bytesOf({ fileOffset, fileLength, from, to, pieceLength }) {
-  if (!Number.isFinite(pieceLength) || pieceLength <= 0) {
-    return null;
-  }
-  if (!Number.isFinite(fileOffset) || !Number.isFinite(fileLength) || fileLength <= 0) {
-    return null;
-  }
-  if (!Number.isInteger(from) || !Number.isInteger(to) || to < from) {
-    return null;
-  }
-  const byteStart = Math.max(0, from * pieceLength - fileOffset);
-  const byteEnd = Math.min(fileLength - 1, (to + 1) * pieceLength - 1 - fileOffset);
-  return byteEnd < byteStart ? null : { byteStart, byteEnd };
-}
-
-/**
- * How many pieces a number of bytes needs, at worst.
- *
- * At worst, because a range of one byte can still straddle two pieces. Used
- * where a budget in bytes has to be turned into places, and rounding the other
- * way would promise room that is not there.
- *
- * @param {number} bytes
- * @param {number} pieceLength
- * @returns {number}
- */
-export function piecesNeededFor(bytes, pieceLength) {
-  if (!Number.isFinite(pieceLength) || pieceLength <= 0 || !Number.isFinite(bytes) || bytes <= 0) {
-    return 0;
-  }
-  return Math.ceil(bytes / pieceLength) + 1;
-}
-
-/**
- * How many whole pieces fit in a number of bytes.
- *
- * The other direction, and it rounds DOWN: a budget buys only the places it can
- * pay for in full.
- *
- * @param {number} bytes
- * @param {number} pieceLength
- * @returns {number}
- */
-export function piecesWithin(bytes, pieceLength) {
-  if (!Number.isFinite(pieceLength) || pieceLength <= 0 || !Number.isFinite(bytes) || bytes <= 0) {
-    return 0;
-  }
-  return Math.floor(bytes / pieceLength);
-}
-
-/**
- * Split a byte range into a few ranges, nearest to a point first.
- *
- * For the gap behind the playhead. WebTorrent walks a selection from its start
- * upwards — `for (piece = next.from + next.offset; piece <= next.to; piece++)` —
- * so one claim over everything behind the viewer would be fetched from the
- * beginning of the file, which is the end furthest from where a backward seek
- * would land. Split, and the part nearest the playhead is stated first.
- *
- * @param {object} params
- * @param {number} params.byteStart - First byte of the gap.
- * @param {number} params.byteEnd - Last byte of the gap, nearest the playhead.
- * @param {number} params.parts - How many ranges to split into.
- * @returns {Array<{ byteStart: number, byteEnd: number }>} Nearest first.
- */
-export function nearestFirst({ byteStart, byteEnd, parts }) {
-  if (!Number.isFinite(byteStart) || !Number.isFinite(byteEnd) || byteEnd < byteStart) {
-    return [];
-  }
-  const count = Number.isInteger(parts) && parts > 0 ? parts : 1;
-  const total = byteEnd - byteStart + 1;
-  const each = Math.ceil(total / count);
-  const ranges = [];
-  for (let end = byteEnd; end >= byteStart; end -= each) {
-    ranges.push({ byteStart: Math.max(byteStart, end - each + 1), byteEnd: end });
-  }
-  return ranges;
-}
+/**
+ * @file The one place bytes become piece numbers.
+ *
+ * Everything else counts in bytes. A piece is what the protocol hashes and what
+ * memory is allocated in, and nothing outside these functions should have to
+ * know its length. Before 2026-09-02 the division was done in three places —
+ * the memory allowance, the reader's window, the eviction ceiling — each
+ * rounding down on its own, and the rounding was where a real failure lived:
+ * with 16 MiB pieces a 64 MB allowance is four places while two readers asking
+ * for 96 MB each want six, and the shortage was invisible because both figures
+ * had already been floored.
+ *
+ * Pure arithmetic on numbers: no torrent, no file object, nothing to stub.
+ */
+
+/**
+ * The pieces that hold a byte range of a file.
+ *
+ * Inclusive at both ends, because a byte range that ends inside a piece still
+ * needs that whole piece: the protocol delivers and verifies nothing smaller.
+ *
+ * @param {object} params
+ * @param {number} params.fileOffset - Where the file starts within the torrent.
+ * @param {number} params.byteStart - First byte wanted, relative to the file.
+ * @param {number} params.byteEnd - Last byte wanted, relative to the file.
+ * @param {number} params.pieceLength
+ * @returns {{ from: number, to: number } | null} Null when the range is not a
+ *   range, or the piece length is not usable.
+ */
+export function piecesOf({ fileOffset, byteStart, byteEnd, pieceLength }) {
+  if (!Number.isFinite(pieceLength) || pieceLength <= 0) {
+    return null;
+  }
+  if (!Number.isFinite(fileOffset) || fileOffset < 0) {
+    return null;
+  }
+  if (!Number.isFinite(byteStart) || !Number.isFinite(byteEnd) || byteEnd < byteStart) {
+    return null;
+  }
+  return {
+    from: Math.floor((fileOffset + Math.max(0, byteStart)) / pieceLength),
+    to: Math.floor((fileOffset + byteEnd) / pieceLength)
+  };
+}
+
+/**
+ * The bytes of a file that a piece range covers, clamped to the file.
+ *
+ * The inverse of {@link piecesOf}, and here for the same reason: a caller that
+ * still thinks in pieces — the reader, which walks a file piece by piece
+ * because that is what arrives — states its need in bytes like everyone else,
+ * and the conversion stays in this one file rather than being written out
+ * again at the boundary.
+ *
+ * @param {object} params
+ * @param {number} params.fileOffset - Where the file starts within the torrent.
+ * @param {number} params.fileLength
+ * @param {number} params.from - First piece, inclusive.
+ * @param {number} params.to - Last piece, inclusive.
+ * @param {number} params.pieceLength
+ * @returns {{ byteStart: number, byteEnd: number } | null}
+ */
+export function bytesOf({ fileOffset, fileLength, from, to, pieceLength }) {
+  if (!Number.isFinite(pieceLength) || pieceLength <= 0) {
+    return null;
+  }
+  if (!Number.isFinite(fileOffset) || !Number.isFinite(fileLength) || fileLength <= 0) {
+    return null;
+  }
+  if (!Number.isInteger(from) || !Number.isInteger(to) || to < from) {
+    return null;
+  }
+  const byteStart = Math.max(0, from * pieceLength - fileOffset);
+  const byteEnd = Math.min(fileLength - 1, (to + 1) * pieceLength - 1 - fileOffset);
+  return byteEnd < byteStart ? null : { byteStart, byteEnd };
+}
+
+/**
+ * How many pieces a number of bytes needs, at worst.
+ *
+ * At worst, because a range of one byte can still straddle two pieces. Used
+ * where a budget in bytes has to be turned into places, and rounding the other
+ * way would promise room that is not there.
+ *
+ * @param {number} bytes
+ * @param {number} pieceLength
+ * @returns {number}
+ */
+export function piecesNeededFor(bytes, pieceLength) {
+  if (!Number.isFinite(pieceLength) || pieceLength <= 0 || !Number.isFinite(bytes) || bytes <= 0) {
+    return 0;
+  }
+  return Math.ceil(bytes / pieceLength) + 1;
+}
+
+/**
+ * How many whole pieces fit in a number of bytes.
+ *
+ * The other direction, and it rounds DOWN: a budget buys only the places it can
+ * pay for in full.
+ *
+ * @param {number} bytes
+ * @param {number} pieceLength
+ * @returns {number}
+ */
+export function piecesWithin(bytes, pieceLength) {
+  if (!Number.isFinite(pieceLength) || pieceLength <= 0 || !Number.isFinite(bytes) || bytes <= 0) {
+    return 0;
+  }
+  return Math.floor(bytes / pieceLength);
+}
+
+/**
+ * Split a byte range into a few ranges, nearest to a point first.
+ *
+ * For the gap behind the playhead. WebTorrent walks a selection from its start
+ * upwards — `for (piece = next.from + next.offset; piece <= next.to; piece++)` —
+ * so one claim over everything behind the viewer would be fetched from the
+ * beginning of the file, which is the end furthest from where a backward seek
+ * would land. Split, and the part nearest the playhead is stated first.
+ *
+ * @param {object} params
+ * @param {number} params.byteStart - First byte of the gap.
+ * @param {number} params.byteEnd - Last byte of the gap, nearest the playhead.
+ * @param {number} params.parts - How many ranges to split into.
+ * @returns {Array<{ byteStart: number, byteEnd: number }>} Nearest first.
+ */
+export function nearestFirst({ byteStart, byteEnd, parts }) {
+  if (!Number.isFinite(byteStart) || !Number.isFinite(byteEnd) || byteEnd < byteStart) {
+    return [];
+  }
+  const count = Number.isInteger(parts) && parts > 0 ? parts : 1;
+  const total = byteEnd - byteStart + 1;
+  const each = Math.ceil(total / count);
+  const ranges = [];
+  for (let end = byteEnd; end >= byteStart; end -= each) {
+    ranges.push({ byteStart: Math.max(byteStart, end - each + 1), byteEnd: end });
+  }
+  return ranges;
+}