@things-factory/figure-service 10.1.70 → 10.1.71

package/recipes/side-guides/build.mts

@@ -0,0 +1,12 @@
+/* 양측 가이드 레일 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 3000, y: 700, z: 800 }, 'TPL_SIDE_GUIDES'))
+  for (const [rail, side] of [['near', 'max'], ['far', 'min']] as const)
+    m.box(rail, 3000, 60, 20)
+      .follow(rail, 'x', 'host', 'x')
+      .on(rail, 'bottom', 'host', 'top', { z: side })
+      .colour(rail, 'palette.rail', '#9aa3ab')
+  return m.asset
+}

package/recipes/side-guides/facts.md

@@ -0,0 +1,3 @@
+# side-guides — facts (not shown on screen; the guide's basis and our review)
+
+윗면 z 최소·최대 가장자리. 길이 = 몸체 X, 높이 매개변수, 두께 20. 한계: 폭 조절 없음.

package/recipes/side-guides/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+To keep what travels on a conveyor from falling off the sides.
+
+## Putting it in
+
+1. Choose the conveyor body; the rails lie along both edges of its **top**.
+2. Set the **rail height** in mm.
+3. Press "put in".
+
+## Afterwards
+
+- The rails follow the body's length.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- The rails stand at the body's edges; move them after putting them in to narrow the lane.

package/recipes/side-guides/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+컨베이어 위로 흐르는 물건이 옆으로 떨어지지 않게 양쪽 가이드를 댈 때 씁니다.
+
+## 넣는 순서
+
+1. 컨베이어 몸체를 고릅니다. 레일은 **윗면의 양쪽 가장자리**에 놓입니다.
+2. **레일 높이**를 mm로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 레일 길이는 몸체 길이를 따릅니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 레일 사이 폭은 몸체 폭 그대로입니다. 좁히려면 넣은 뒤 레일을 옮깁니다.

package/recipes/side-guides/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_SIDE_GUIDES","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"near.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"near.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"far.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"far.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"near.shape","op":"box-shape@1","args":["near.dimension.x.value","near.dimension.height","near.dimension.depth"],"outputs":{"shape":"near.shapeValue"},"params":{"frame":"near.local"}},{"id":"near.pose","op":"rigid@1","args":["d.mm.0","near.on.host.along.y.1.sum.value","near.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"near.poseValue"},"params":{"from":"near.local","to":"near.seat"}},{"id":"near","op":"place@1","args":["near.shapeValue","near.world.value"],"outputs":{"placed":"near.placed"}},{"id":"near.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"near.dimension.x.value"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"far.shape","op":"box-shape@1","args":["far.dimension.x.value","far.dimension.height","far.dimension.depth"],"outputs":{"shape":"far.shapeValue"},"params":{"frame":"far.local"}},{"id":"far.pose","op":"rigid@1","args":["d.mm.0","far.on.host.along.y.1.sum.value","far.on.host.own-edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"far.poseValue"},"params":{"from":"far.local","to":"far.seat"}},{"id":"far","op":"place@1","args":["far.shapeValue","far.world.value"],"outputs":{"placed":"far.placed"}},{"id":"far.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"far.dimension.x.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"near.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"near.on.host.seat.y.0.times.value"}},{"id":"near.on.host.along.y.0.times","op":"mul@1","args":["near.dimension.height","k.ratio.0_5"],"outputs":{"value":"near.on.host.along.y.0.times.value"}},{"id":"near.on.host.along.y.1.sum","op":"add@1","args":["near.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"near.on.host.along.y.1.sum.value"}},{"id":"near.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"near.on.host.edge.z.0.times.value"}},{"id":"near.on.host.own-edge.z.0.times","op":"mul@1","args":["near.dimension.depth","k.ratio._0_5"],"outputs":{"value":"near.on.host.own-edge.z.0.times.value"}},{"id":"near.seat.rigid","op":"rigid@1","args":["d.mm.0","near.on.host.seat.y.0.times.value","near.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"near.seat.value"},"params":{"from":"near.seat","to":"host.local"}},{"id":"near.chain","op":"compose@1","args":["near.seat.value","near.poseValue"],"outputs":{"pose":"near.chain.value"}},{"id":"near.world","op":"compose@1","args":["host.chain.value","near.chain.value"],"outputs":{"pose":"near.world.value"}},{"id":"far.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"far.on.host.seat.y.0.times.value"}},{"id":"far.on.host.along.y.0.times","op":"mul@1","args":["far.dimension.height","k.ratio.0_5"],"outputs":{"value":"far.on.host.along.y.0.times.value"}},{"id":"far.on.host.along.y.1.sum","op":"add@1","args":["far.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"far.on.host.along.y.1.sum.value"}},{"id":"far.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio._0_5"],"outputs":{"value":"far.on.host.edge.z.0.times.value"}},{"id":"far.on.host.own-edge.z.0.times","op":"mul@1","args":["far.dimension.depth","k.ratio.0_5"],"outputs":{"value":"far.on.host.own-edge.z.0.times.value"}},{"id":"far.seat.rigid","op":"rigid@1","args":["d.mm.0","far.on.host.seat.y.0.times.value","far.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"far.seat.value"},"params":{"from":"far.seat","to":"host.local"}},{"id":"far.chain","op":"compose@1","args":["far.seat.value","far.poseValue"],"outputs":{"pose":"far.chain.value"}},{"id":"far.world","op":"compose@1","args":["host.chain.value","far.chain.value"],"outputs":{"pose":"far.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":3000,"host.size.y":700,"host.size.z":800,"near.dimension.height":60,"near.dimension.depth":20,"far.dimension.height":60,"far.dimension.depth":20},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-9aa3ab":"#9aa3ab"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"near","material":{"token":"palette.tpl-9aa3ab"}},{"target":"far","material":{"token":"palette.tpl-9aa3ab"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"near","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"near","face":"bottom"},"origin":{"align":{"z":"max"}}},{"id":"far","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"far","face":"bottom"},"origin":{"align":{"z":"min"}}}]}

package/recipes/side-guides/recipe.json

@@ -0,0 +1,147 @@
+{
+  "name": "side-guides",
+  "title": {
+    "ko": "양측 가이드 레일",
+    "en": "side guide rails"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 양쪽 가장자리를 따라 가이드 레일 두 줄을 넣습니다.",
+    "en": "Two guide rails along both edges of the chosen part's top."
+  },
+  "category": "conveyor",
+  "tags": [
+    "guide",
+    "rail",
+    "conveyor"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 60,
+      "min": 10,
+      "max": 400,
+      "label": {
+        "ko": "레일 높이 (mm)",
+        "en": "rail height (mm)"
+      },
+      "hint": {
+        "ko": "윗면에서 레일 위까지",
+        "en": "from the top to the rail's top"
+      }
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-near",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": {
+            "param": "height"
+          },
+          "depth": 20
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-far",
+        "kind": "box",
+        "dimensions": {
+          "width": 3000,
+          "height": {
+            "param": "height"
+          },
+          "depth": 20
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-near",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-far",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-near",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-near",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-far",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-far",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "z": "min"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-near",
+      "material": {
+        "token": "palette.tpl-9aa3ab"
+      },
+      "palette": {
+        "palette.tpl-9aa3ab": "#9aa3ab"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-far",
+      "material": {
+        "token": "palette.tpl-9aa3ab"
+      },
+      "palette": {
+        "palette.tpl-9aa3ab": "#9aa3ab"
+      }
+    }
+  ]
+}

package/recipes/side-guides/spec.json

@@ -0,0 +1,54 @@
+{
+  "name": "side-guides",
+  "category": "conveyor",
+  "tags": [
+    "guide",
+    "rail",
+    "conveyor"
+  ],
+  "title": {
+    "ko": "양측 가이드 레일",
+    "en": "side guide rails"
+  },
+  "description": {
+    "ko": "고른 부품 윗면의 양쪽 가장자리를 따라 가이드 레일 두 줄을 넣습니다.",
+    "en": "Two guide rails along both edges of the chosen part's top."
+  },
+  "params": [
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 60,
+      "min": 10,
+      "max": 400,
+      "label": {
+        "ko": "레일 높이 (mm)",
+        "en": "rail height (mm)"
+      },
+      "hint": {
+        "ko": "윗면에서 레일 위까지",
+        "en": "from the top to the rail's top"
+      },
+      "bind": [
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-near"
+            }
+          },
+          "path": "part.dimensions.height"
+        },
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-far"
+            }
+          },
+          "path": "part.dimensions.height"
+        }
+      ]
+    }
+  ]
+}

package/recipes/sign-board/build.mts

@@ -0,0 +1,11 @@
+/* 표시판 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_SIGN_BOARD'))
+  m.box('board', 960, 200, 15)
+    .follow('board', 'x', 'host', 'x', 0.6)
+    .on('board', 'back', 'host', 'front', { y: 'max' })
+    .colour('board', 'palette.sign', '#1f4e79')
+  return m.asset
+}

package/recipes/sign-board/facts.md

@@ -0,0 +1,3 @@
+# sign-board — facts (not shown on screen; the guide's basis and our review)
+
+앞면 y 최대(위쪽). 폭 = 부품 X × 비율, 높이 200, 두께 15.

package/recipes/sign-board/guide.en.md

@@ -0,0 +1,18 @@
+## When to use it
+
+For a name plate or a sign on a machine or an area.
+
+## Putting it in
+
+1. Choose the part; the board goes at the top of its **front**.
+2. Set the **width** as a % of the part's width.
+3. Press "put in".
+
+## Afterwards
+
+- Put the words on with the board's text component.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- Its height is 200 mm.

package/recipes/sign-board/guide.ko.md

@@ -0,0 +1,18 @@
+## 언제 쓰나
+
+설비나 구역의 이름표, 안내판을 달 때 씁니다.
+
+## 넣는 순서
+
+1. 부품을 고릅니다. 표시판은 **앞면 위쪽**에 붙습니다.
+2. **폭**을 부품 폭에 대한 %로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 글자는 보드의 글 부품으로 얹습니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 높이는 200 mm로 고정입니다.

package/recipes/sign-board/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_SIGN_BOARD","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"board.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"board.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"k.ratio.0_6","unit":"ratio","value":0.6},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"board.shape","op":"box-shape@1","args":["board.dimension.x.value","board.dimension.height","board.dimension.depth"],"outputs":{"shape":"board.shapeValue"},"params":{"frame":"board.local"}},{"id":"board.pose","op":"rigid@1","args":["d.mm.0","board.on.host.own-edge.y.0.times.value","board.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"board.poseValue"},"params":{"from":"board.local","to":"board.seat"}},{"id":"board","op":"place@1","args":["board.shapeValue","board.world.value"],"outputs":{"placed":"board.placed"}},{"id":"board.dimension.x","op":"mul@1","args":["board.x.follows.times.value","k.ratio.1"],"outputs":{"value":"board.dimension.x.value"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"board.x.follows.times","op":"mul@1","args":["host.dimension.x.value","k.ratio.0_6"],"outputs":{"value":"board.x.follows.times.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"board.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"board.on.host.seat.z.0.times.value"}},{"id":"board.on.host.along.z.0.times","op":"mul@1","args":["board.dimension.depth","k.ratio.0_5"],"outputs":{"value":"board.on.host.along.z.0.times.value"}},{"id":"board.on.host.along.z.1.sum","op":"add@1","args":["board.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"board.on.host.along.z.1.sum.value"}},{"id":"board.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"board.on.host.edge.y.0.times.value"}},{"id":"board.on.host.own-edge.y.0.times","op":"mul@1","args":["board.dimension.height","k.ratio._0_5"],"outputs":{"value":"board.on.host.own-edge.y.0.times.value"}},{"id":"board.seat.rigid","op":"rigid@1","args":["d.mm.0","board.on.host.edge.y.0.times.value","board.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"board.seat.value"},"params":{"from":"board.seat","to":"host.local"}},{"id":"board.chain","op":"compose@1","args":["board.seat.value","board.poseValue"],"outputs":{"pose":"board.chain.value"}},{"id":"board.world","op":"compose@1","args":["host.chain.value","board.chain.value"],"outputs":{"pose":"board.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"board.dimension.height":200,"board.dimension.depth":15},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-1f4e79":"#1f4e79"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"board","material":{"token":"palette.tpl-1f4e79"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"board","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"board","face":"back"},"origin":{"align":{"y":"max"}}}]}

package/recipes/sign-board/recipe.json

@@ -0,0 +1,93 @@
+{
+  "name": "sign-board",
+  "title": {
+    "ko": "표시판",
+    "en": "sign board"
+  },
+  "description": {
+    "ko": "고른 부품 앞면 위쪽에 표시판을 넣습니다. 폭은 부품 폭을 따릅니다.",
+    "en": "A sign board at the top of the chosen part's front; its width follows the part's."
+  },
+  "category": "signal",
+  "tags": [
+    "sign",
+    "board",
+    "label"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "width",
+      "kind": "ratio",
+      "default": 0.6,
+      "min": 0.1,
+      "max": 1,
+      "label": {
+        "ko": "폭 (부품 폭에 대해)",
+        "en": "width (of the part's)"
+      },
+      "hint": {
+        "ko": "고른 부품 폭에 대한 표시판 폭",
+        "en": "the board's width as a share of the part's"
+      }
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-board",
+        "kind": "box",
+        "dimensions": {
+          "width": 960,
+          "height": 200,
+          "depth": 15
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-board",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "times": {
+        "param": "width"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-board",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-board",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-board",
+      "material": {
+        "token": "palette.tpl-1f4e79"
+      },
+      "palette": {
+        "palette.tpl-1f4e79": "#1f4e79"
+      }
+    }
+  ]
+}

package/recipes/sign-board/spec.json

@@ -0,0 +1,44 @@
+{
+  "name": "sign-board",
+  "category": "signal",
+  "tags": [
+    "sign",
+    "board",
+    "label"
+  ],
+  "title": {
+    "ko": "표시판",
+    "en": "sign board"
+  },
+  "description": {
+    "ko": "고른 부품 앞면 위쪽에 표시판을 넣습니다. 폭은 부품 폭을 따릅니다.",
+    "en": "A sign board at the top of the chosen part's front; its width follows the part's."
+  },
+  "params": [
+    {
+      "name": "width",
+      "kind": "ratio",
+      "default": 0.6,
+      "min": 0.1,
+      "max": 1,
+      "label": {
+        "ko": "폭 (부품 폭에 대해)",
+        "en": "width (of the part's)"
+      },
+      "hint": {
+        "ko": "고른 부품 폭에 대한 표시판 폭",
+        "en": "the board's width as a share of the part's"
+      },
+      "bind": [
+        {
+          "step": {
+            "kind": "link-dimension",
+            "part": "{id}-board",
+            "axis": "x"
+          },
+          "path": "times"
+        }
+      ]
+    }
+  ]
+}

package/recipes/signal-tower-3/build.mts

@@ -0,0 +1,19 @@
+/* 시그널타워 3단 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_SIGNAL_TOWER_3'))
+  m.add({ id: 'pole', kind: 'cylinder', dimensions: { radius: 15, length: 300 } } as never)
+    .on('pole', 'bottom', 'host', 'top', { x: 'max', z: 'min' })
+    .colour('pole', 'palette.leg', '#7d8790')
+  let below = 'pole'
+  for (const [tier, colour, at] of [['green', '#2ecc71', 1], ['amber', '#f5a623', 2], ['red', '#e74c3c', 3]] as const) {
+    m.add({ id: tier, kind: 'cylinder', dimensions: { radius: 40, length: 90 } } as never)
+      .on(tier, 'bottom', below, 'top')
+      .colour(tier, `palette.${tier}`, colour, true)
+    if (tier === 'green') m.do({ kind: 'set-joint', joint: { ...m.asset.joints!.find(j => j.body1.part === 'green')!, type: 'prismatic', axis: 'Y', lowerLimit: 0, upperLimit: 0.001, state: { id: 'level' } } } as never)
+    below = tier
+    void at
+  }
+  return m.asset
+}

package/recipes/signal-tower-3/facts.md

@@ -0,0 +1,3 @@
+# signal-tower-3 — facts (not shown on screen; the guide's basis and our review)
+
+윗면 x 최대 · z 최소 모서리. 기둥 r15×300, 단 r40×90 ×3(초록·노랑·빨강, 빛남). 단마다 켜짐 조작값은 아직 없음.

package/recipes/signal-tower-3/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+For a three-tier signal tower (red, amber, green) that shows a machine's state.
+
+## Putting it in
+
+1. Choose the body; the tower stands at the right back corner of its **top**.
+2. Press "put in".
+
+## Afterwards
+
+- The three tiers are drawn lit; switching them is done by the board's data.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- The tower does not follow the body's size.

package/recipes/signal-tower-3/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+설비 상태를 알리는 3단 시그널타워(빨강·노랑·초록)를 달 때 씁니다.
+
+## 넣는 순서
+
+1. 설비 몸체를 고릅니다. 타워는 **윗면의 오른쪽 뒤 모서리**에 섭니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 세 단은 늘 빛나는 색으로 그려집니다. 켜고 끄는 것은 보드의 데이터 연결로 합니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 타워 크기는 몸체를 따르지 않습니다.

package/recipes/signal-tower-3/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_SIGNAL_TOWER_3","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"pole.dimension.radius","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"pole.dimension.length","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"green.dimension.radius","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"green.dimension.length","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"amber.dimension.radius","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"amber.dimension.length","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"red.dimension.radius","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"red.dimension.length","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"level","unit":"mm","min":0,"max":0.001,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._1","unit":"ratio","value":-1},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.0","unit":"ratio","value":0},{"id":"axis.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"pole.shape","op":"cylinder-shape@1","args":["pole.dimension.radius","pole.dimension.length"],"outputs":{"shape":"pole.shapeValue"},"params":{"frame":"pole.local"}},{"id":"pole.pose","op":"rigid@1","args":["pole.on.host.own-edge.x.0.times.value","pole.on.host.along.y.1.sum.value","pole.dimension.radius","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"pole.poseValue"},"params":{"from":"pole.local","to":"pole.seat"}},{"id":"pole","op":"place@1","args":["pole.shapeValue","pole.world.value"],"outputs":{"placed":"pole.placed"}},{"id":"green.shape","op":"cylinder-shape@1","args":["green.dimension.radius","green.dimension.length"],"outputs":{"shape":"green.shapeValue"},"params":{"frame":"green.local"}},{"id":"green.pose","op":"rigid@1","args":["d.mm.0","green.on.pole.along.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"green.poseValue"},"params":{"from":"green.local","to":"green.seat"}},{"id":"green","op":"place@1","args":["green.shapeValue","green.world.value"],"outputs":{"placed":"green.placed"}},{"id":"amber.shape","op":"cylinder-shape@1","args":["amber.dimension.radius","amber.dimension.length"],"outputs":{"shape":"amber.shapeValue"},"params":{"frame":"amber.local"}},{"id":"amber.pose","op":"rigid@1","args":["d.mm.0","amber.on.green.along.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"amber.poseValue"},"params":{"from":"amber.local","to":"amber.seat"}},{"id":"amber","op":"place@1","args":["amber.shapeValue","amber.world.value"],"outputs":{"placed":"amber.placed"}},{"id":"red.shape","op":"cylinder-shape@1","args":["red.dimension.radius","red.dimension.length"],"outputs":{"shape":"red.shapeValue"},"params":{"frame":"red.local"}},{"id":"red.pose","op":"rigid@1","args":["d.mm.0","red.on.amber.along.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"red.poseValue"},"params":{"from":"red.local","to":"red.seat"}},{"id":"red","op":"place@1","args":["red.shapeValue","red.world.value"],"outputs":{"placed":"red.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"pole.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"pole.on.host.seat.y.0.times.value"}},{"id":"pole.on.host.along.y.0.times","op":"mul@1","args":["pole.dimension.length","k.ratio.0_5"],"outputs":{"value":"pole.on.host.along.y.0.times.value"}},{"id":"pole.on.host.along.y.1.sum","op":"add@1","args":["pole.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"pole.on.host.along.y.1.sum.value"}},{"id":"pole.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio.0_5"],"outputs":{"value":"pole.on.host.edge.x.0.times.value"}},{"id":"pole.on.host.own-edge.x.0.times","op":"mul@1","args":["pole.dimension.radius","k.ratio._1"],"outputs":{"value":"pole.on.host.own-edge.x.0.times.value"}},{"id":"pole.on.host.edge.z.0.times","op":"mul@1","args":["host.size.z","k.ratio._0_5"],"outputs":{"value":"pole.on.host.edge.z.0.times.value"}},{"id":"pole.seat.rigid","op":"rigid@1","args":["pole.on.host.edge.x.0.times.value","pole.on.host.seat.y.0.times.value","pole.on.host.edge.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"pole.seat.value"},"params":{"from":"pole.seat","to":"host.local"}},{"id":"pole.chain","op":"compose@1","args":["pole.seat.value","pole.poseValue"],"outputs":{"pose":"pole.chain.value"}},{"id":"pole.world","op":"compose@1","args":["host.chain.value","pole.chain.value"],"outputs":{"pose":"pole.world.value"}},{"id":"green.on.pole.seat.y.0.times","op":"mul@1","args":["pole.dimension.length","k.ratio.0_5"],"outputs":{"value":"green.on.pole.seat.y.0.times.value"}},{"id":"green.on.pole.along.y.0.times","op":"mul@1","args":["green.dimension.length","k.ratio.0_5"],"outputs":{"value":"green.on.pole.along.y.0.times.value"}},{"id":"green.on.pole.along.y.1.sum","op":"add@1","args":["green.on.pole.along.y.0.times.value","d.mm.0"],"outputs":{"value":"green.on.pole.along.y.1.sum.value"}},{"id":"green.seat.rigid","op":"rigid@1","args":["d.mm.0","green.on.pole.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"green.seat.value"},"params":{"from":"green.joint","to":"pole.local"}},{"id":"green.chain","op":"compose@1","args":["green.seat.value","green.turned.value"],"outputs":{"pose":"green.chain.value"}},{"id":"green.world","op":"compose@1","args":["pole.world.value","green.chain.value"],"outputs":{"pose":"green.world.value"}},{"id":"green.motion","op":"axis-slide@1","args":["axis.ratio.0","axis.ratio.1","axis.ratio.0","level"],"outputs":{"pose":"green.motion.value"},"params":{"from":"green.seat","to":"green.joint"}},{"id":"green.turned","op":"compose@1","args":["green.motion.value","green.poseValue"],"outputs":{"pose":"green.turned.value"}},{"id":"amber.on.green.seat.y.0.times","op":"mul@1","args":["green.dimension.length","k.ratio.0_5"],"outputs":{"value":"amber.on.green.seat.y.0.times.value"}},{"id":"amber.on.green.along.y.0.times","op":"mul@1","args":["amber.dimension.length","k.ratio.0_5"],"outputs":{"value":"amber.on.green.along.y.0.times.value"}},{"id":"amber.on.green.along.y.1.sum","op":"add@1","args":["amber.on.green.along.y.0.times.value","d.mm.0"],"outputs":{"value":"amber.on.green.along.y.1.sum.value"}},{"id":"amber.seat.rigid","op":"rigid@1","args":["d.mm.0","amber.on.green.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"amber.seat.value"},"params":{"from":"amber.seat","to":"green.local"}},{"id":"amber.chain","op":"compose@1","args":["amber.seat.value","amber.poseValue"],"outputs":{"pose":"amber.chain.value"}},{"id":"amber.world","op":"compose@1","args":["green.world.value","amber.chain.value"],"outputs":{"pose":"amber.world.value"}},{"id":"red.on.amber.seat.y.0.times","op":"mul@1","args":["amber.dimension.length","k.ratio.0_5"],"outputs":{"value":"red.on.amber.seat.y.0.times.value"}},{"id":"red.on.amber.along.y.0.times","op":"mul@1","args":["red.dimension.length","k.ratio.0_5"],"outputs":{"value":"red.on.amber.along.y.0.times.value"}},{"id":"red.on.amber.along.y.1.sum","op":"add@1","args":["red.on.amber.along.y.0.times.value","d.mm.0"],"outputs":{"value":"red.on.amber.along.y.1.sum.value"}},{"id":"red.seat.rigid","op":"rigid@1","args":["d.mm.0","red.on.amber.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"red.seat.value"},"params":{"from":"red.seat","to":"amber.local"}},{"id":"red.chain","op":"compose@1","args":["red.seat.value","red.poseValue"],"outputs":{"pose":"red.chain.value"}},{"id":"red.world","op":"compose@1","args":["amber.world.value","red.chain.value"],"outputs":{"pose":"red.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"pole.dimension.radius":15,"pole.dimension.length":300,"green.dimension.radius":40,"green.dimension.length":90,"amber.dimension.radius":40,"amber.dimension.length":90,"red.dimension.radius":40,"red.dimension.length":90},"stateDefaults":{"level":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-7d8790":"#7d8790","palette.tpl-2ecc71":"#2ecc71","palette.tpl-f5a623":"#f5a623","palette.tpl-e74c3c":"#e74c3c"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"pole","material":{"token":"palette.tpl-7d8790"},"segments":12},{"target":"green","material":{"token":"palette.tpl-2ecc71","emissive":{"on":true,"token":"palette.tpl-2ecc71","intensity":1}},"segments":12},{"target":"amber","material":{"token":"palette.tpl-f5a623","emissive":{"on":true,"token":"palette.tpl-f5a623","intensity":1}},"segments":12},{"target":"red","material":{"token":"palette.tpl-e74c3c","emissive":{"on":true,"token":"palette.tpl-e74c3c","intensity":1}},"segments":12}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"pole","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"pole","face":"bottom"},"origin":{"align":{"x":"max","z":"min"}}},{"id":"green","type":"prismatic","body0":{"part":"pole","face":"top"},"body1":{"part":"green","face":"bottom"},"origin":{},"axis":"Y","lowerLimit":0,"upperLimit":0.001,"state":{"id":"level"}},{"id":"amber","type":"fixed","body0":{"part":"green","face":"top"},"body1":{"part":"amber","face":"bottom"},"origin":{}},{"id":"red","type":"fixed","body0":{"part":"amber","face":"top"},"body1":{"part":"red","face":"bottom"},"origin":{}}]}