@things-factory/figure-service 10.1.70 → 10.1.71

package/recipes/drawer-stack/spec.json

@@ -0,0 +1,37 @@
+{
+  "name": "drawer-stack",
+  "category": "storage",
+  "tags": [
+    "drawer",
+    "cabinet",
+    "storage"
+  ],
+  "title": {
+    "ko": "서랍 단",
+    "en": "drawer stack"
+  },
+  "description": {
+    "ko": "고른 부품(서랍장 몸체) 앞면에 서랍을 여러 단 넣습니다. 서랍마다 조작값으로 따로 열립니다.",
+    "en": "Drawers in tiers on the front of the chosen part (a cabinet body); each opens on its own control."
+  },
+  "params": [
+    {
+      "name": "drawers",
+      "kind": "choice",
+      "default": 3,
+      "label": {
+        "ko": "서랍 수",
+        "en": "drawers"
+      },
+      "hint": {
+        "ko": "위아래로 고르게 놓이는 서랍 수",
+        "en": "how many drawers, spread evenly up the body"
+      },
+      "options": [
+        2,
+        3,
+        4
+      ]
+    }
+  ]
+}

package/recipes/drip-tray/build.mts

@@ -0,0 +1,12 @@
+/* 물받이 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_DRIP_TRAY'))
+  m.add({ id: 'tray', kind: 'hollow-box', dimensions: { width: 1600, height: 60, depth: 1000, roundX: 0, roundZ: 0, wallX: 5, wallZ: 5, floor: 5 } } as never)
+    .follow('tray', 'x', 'host', 'x')
+    .follow('tray', 'z', 'host', 'z')
+    .on('tray', 'bottom', 'host', 'top')
+    .colour('tray', 'tray-dark', '#6f7f8e')
+  return m.asset
+}

package/recipes/drip-tray/facts.md

@@ -0,0 +1,3 @@
+# drip-tray — facts (not shown on screen; the guide's basis and our review)
+
+윗면. hollow-box X·Z = 몸체 X·Z, 높이 60, 벽 5, 바닥 5.

package/recipes/drip-tray/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To show a drip tray catching leaks under a pump, tank or machine.
+
+## Putting it in
+
+1. Choose the machine or its base; the tray lies on its **top**.
+2. Press "put in".
+
+## Afterwards
+
+- The tray follows the part's width and depth. Attach the machine on top of it.
+
+## Good to know
+
+- It is a shallow tray: 60 mm deep, 5 mm walls.

package/recipes/drip-tray/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+펌프 · 탱크 · 가공기 아래 새는 액체를 받는 물받이를 보일 때 씁니다.
+
+## 넣는 순서
+
+1. 설비나 받침을 고릅니다. 물받이는 **윗면**에 깔립니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 물받이는 부품의 폭과 깊이를 따릅니다. 그 위에 설비를 붙이면 됩니다.
+
+## 알아 둘 것
+
+- 깊이 60 mm, 벽 5 mm의 얕은 쟁반입니다.

package/recipes/drip-tray/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_DRIP_TRAY","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.roundX","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.roundZ","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.wallX","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.wallZ","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"tray.dimension.floor","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.dimension.x.value","host.size.y","host.dimension.z.value"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"tray.shape","op":"hollow-box@2","args":["tray.dimension.x.value","tray.dimension.height","tray.dimension.z.value","tray.dimension.roundX","tray.dimension.roundZ","tray.dimension.wallX","tray.dimension.wallZ","tray.dimension.floor"],"outputs":{"shape":"tray.shapeValue"},"params":{"frame":"tray.local"}},{"id":"tray.pose","op":"rigid@1","args":["d.mm.0","tray.on.host.along.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"tray.poseValue"},"params":{"from":"tray.local","to":"tray.seat"}},{"id":"tray","op":"place@1","args":["tray.shapeValue","tray.world.value"],"outputs":{"placed":"tray.placed"}},{"id":"tray.dimension.x","op":"mul@1","args":["host.dimension.x.value","k.ratio.1"],"outputs":{"value":"tray.dimension.x.value"}},{"id":"host.dimension.x","op":"mul@1","args":["host.size.x","k.ratio.1"],"outputs":{"value":"host.dimension.x.value"}},{"id":"tray.dimension.z","op":"mul@1","args":["host.dimension.z.value","k.ratio.1"],"outputs":{"value":"tray.dimension.z.value"}},{"id":"host.dimension.z","op":"mul@1","args":["host.size.z","k.ratio.1"],"outputs":{"value":"host.dimension.z.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"tray.on.host.seat.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"tray.on.host.seat.y.0.times.value"}},{"id":"tray.on.host.along.y.0.times","op":"mul@1","args":["tray.dimension.height","k.ratio.0_5"],"outputs":{"value":"tray.on.host.along.y.0.times.value"}},{"id":"tray.on.host.along.y.1.sum","op":"add@1","args":["tray.on.host.along.y.0.times.value","d.mm.0"],"outputs":{"value":"tray.on.host.along.y.1.sum.value"}},{"id":"tray.seat.rigid","op":"rigid@1","args":["d.mm.0","tray.on.host.seat.y.0.times.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"tray.seat.value"},"params":{"from":"tray.seat","to":"host.local"}},{"id":"tray.chain","op":"compose@1","args":["tray.seat.value","tray.poseValue"],"outputs":{"pose":"tray.chain.value"}},{"id":"tray.world","op":"compose@1","args":["host.chain.value","tray.chain.value"],"outputs":{"pose":"tray.world.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"tray.dimension.height":60,"tray.dimension.roundX":0,"tray.dimension.roundZ":0,"tray.dimension.wallX":5,"tray.dimension.wallZ":5,"tray.dimension.floor":5},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-6f7f8e":"#6f7f8e"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"tray","material":{"token":"palette.tpl-6f7f8e"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"tray","type":"fixed","body0":{"part":"host","face":"top"},"body1":{"part":"tray","face":"bottom"},"origin":{}}]}

package/recipes/drip-tray/recipe.json

@@ -0,0 +1,86 @@
+{
+  "name": "drip-tray",
+  "title": {
+    "ko": "물받이",
+    "en": "drip tray"
+  },
+  "description": {
+    "ko": "고른 부품(설비) 윗면에 얕은 물받이를 깝니다. 물받이는 부품 크기를 따릅니다.",
+    "en": "A shallow drip tray over the chosen part's top (a machine), following its size."
+  },
+  "category": "utility",
+  "tags": [
+    "drip tray",
+    "spill",
+    "tray"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-tray",
+        "kind": "hollow-box",
+        "dimensions": {
+          "width": 1600,
+          "height": 60,
+          "depth": 1000,
+          "roundX": 0,
+          "roundZ": 0,
+          "wallX": 5,
+          "wallZ": 5,
+          "floor": 5
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-tray",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-tray",
+      "axis": "z",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "z"
+      },
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-tray",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-tray",
+          "face": "bottom"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-tray",
+      "material": {
+        "token": "palette.tpl-6f7f8e"
+      },
+      "palette": {
+        "palette.tpl-6f7f8e": "#6f7f8e"
+      }
+    }
+  ]
+}

package/recipes/drip-tray/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "drip-tray",
+  "category": "utility",
+  "tags": [
+    "drip tray",
+    "spill",
+    "tray"
+  ],
+  "title": {
+    "ko": "물받이",
+    "en": "drip tray"
+  },
+  "description": {
+    "ko": "고른 부품(설비) 윗면에 얕은 물받이를 깝니다. 물받이는 부품 크기를 따릅니다.",
+    "en": "A shallow drip tray over the chosen part's top (a machine), following its size."
+  },
+  "params": []
+}

package/recipes/duct-fan/build.mts

@@ -0,0 +1,14 @@
+/* 덕트 팬 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 4000, y: 3000, z: 200 }, 'TPL_DUCT_FAN'))
+  m.box('ring', 800, 800, 40)
+    .on('ring', 'back', 'host', 'front', { y: 'max' })
+    .colour('ring', 'panel', '#4f5d6b')
+    .box('blades', 680, 120, 20)
+    .on('blades', 'back', 'host', 'front', { y: { mm: { from: { of: 'part', part: 'host', axis: 'y' }, times: 0.5, plus: -400 } } }, 60)
+    .colour('blades', 'blade', '#e8b04a')
+    .moves('blades', { type: 'revolute', axis: 'Z', lower: -180, upper: 180, state: 'spin' })
+  return m.asset
+}

package/recipes/duct-fan/facts.md

@@ -0,0 +1,3 @@
+# duct-fan — facts (not shown on screen; the guide's basis and our review)
+
+앞면 y max. 테 800×800×40. 날개 680×120×20, 테 가운데 높이(몸체 Y×0.5 − 400), 앞으로 60 띄움. 회전 Z −180~180, 조작값 spin.

package/recipes/duct-fan/guide.en.md

@@ -0,0 +1,16 @@
+## When to use it
+
+To show a ventilation or exhaust fan in a wall.
+
+## Putting it in
+
+1. Choose the wall; the fan goes on the **upper part of its front**.
+2. Press "put in".
+
+## Afterwards
+
+- The **spin** control turns the blades from −180° to 180°. Link it to a live value to show the fan running.
+
+## Good to know
+
+- The frame is an 800 mm square; the blades stand 20 mm in front of it.

package/recipes/duct-fan/guide.ko.md

@@ -0,0 +1,16 @@
+## 언제 쓰나
+
+벽의 환기 팬 · 배기 팬을 보일 때 씁니다.
+
+## 넣는 순서
+
+1. 벽을 고릅니다. 팬은 **앞면 위쪽**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **회전** 조작값으로 날개가 −180°~180° 돕니다. 라이브 값에 이으면 가동을 보일 수 있습니다.
+
+## 알아 둘 것
+
+- 테는 800 mm 정사각형, 날개는 테 앞 20 mm에 떠 있습니다.

package/recipes/duct-fan/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_DUCT_FAN","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"ring.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"ring.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"ring.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"blades.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"blades.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"blades.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"spin","unit":"deg","min":-180,"max":180,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"d.mm.60","unit":"mm","value":60},{"id":"k.ratio.1","unit":"ratio","value":1},{"id":"d.mm._400","unit":"mm","value":-400},{"id":"axis.ratio.0","unit":"ratio","value":0}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.dimension.y.value","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"ring.shape","op":"box-shape@1","args":["ring.dimension.width","ring.dimension.height","ring.dimension.depth"],"outputs":{"shape":"ring.shapeValue"},"params":{"frame":"ring.local"}},{"id":"ring.pose","op":"rigid@1","args":["d.mm.0","ring.on.host.own-edge.y.0.times.value","ring.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"ring.poseValue"},"params":{"from":"ring.local","to":"ring.seat"}},{"id":"ring","op":"place@1","args":["ring.shapeValue","ring.world.value"],"outputs":{"placed":"ring.placed"}},{"id":"blades.shape","op":"box-shape@1","args":["blades.dimension.width","blades.dimension.height","blades.dimension.depth"],"outputs":{"shape":"blades.shapeValue"},"params":{"frame":"blades.local"}},{"id":"blades.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","blades.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"blades.poseValue"},"params":{"from":"blades.local","to":"blades.seat"}},{"id":"blades","op":"place@1","args":["blades.shapeValue","blades.world.value"],"outputs":{"placed":"blades.placed"}},{"id":"host.dimension.y","op":"mul@1","args":["host.size.y","k.ratio.1"],"outputs":{"value":"host.dimension.y.value"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.dimension.y.value","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"ring.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"ring.on.host.seat.z.0.times.value"}},{"id":"ring.on.host.along.z.0.times","op":"mul@1","args":["ring.dimension.depth","k.ratio.0_5"],"outputs":{"value":"ring.on.host.along.z.0.times.value"}},{"id":"ring.on.host.along.z.1.sum","op":"add@1","args":["ring.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"ring.on.host.along.z.1.sum.value"}},{"id":"ring.on.host.edge.y.0.times","op":"mul@1","args":["host.dimension.y.value","k.ratio.0_5"],"outputs":{"value":"ring.on.host.edge.y.0.times.value"}},{"id":"ring.on.host.own-edge.y.0.times","op":"mul@1","args":["ring.dimension.height","k.ratio._0_5"],"outputs":{"value":"ring.on.host.own-edge.y.0.times.value"}},{"id":"ring.seat.rigid","op":"rigid@1","args":["d.mm.0","ring.on.host.edge.y.0.times.value","ring.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"ring.seat.value"},"params":{"from":"ring.seat","to":"host.local"}},{"id":"ring.chain","op":"compose@1","args":["ring.seat.value","ring.poseValue"],"outputs":{"pose":"ring.chain.value"}},{"id":"ring.world","op":"compose@1","args":["host.chain.value","ring.chain.value"],"outputs":{"pose":"ring.world.value"}},{"id":"blades.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"blades.on.host.seat.z.0.times.value"}},{"id":"blades.on.host.along.z.0.times","op":"mul@1","args":["blades.dimension.depth","k.ratio.0_5"],"outputs":{"value":"blades.on.host.along.z.0.times.value"}},{"id":"blades.on.host.along.z.1.sum","op":"add@1","args":["blades.on.host.along.z.0.times.value","d.mm.60"],"outputs":{"value":"blades.on.host.along.z.1.sum.value"}},{"id":"blades.on.host.align.y.times","op":"mul@1","args":["host.dimension.y.value","k.ratio.0_5"],"outputs":{"value":"blades.on.host.align.y.times.value"}},{"id":"blades.on.host.align.y.plus","op":"add@1","args":["blades.on.host.align.y.times.value","d.mm._400"],"outputs":{"value":"blades.on.host.align.y.plus.value"}},{"id":"blades.seat.rigid","op":"rigid@1","args":["d.mm.0","blades.on.host.align.y.plus.value","blades.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"blades.seat.value"},"params":{"from":"blades.joint","to":"host.local"}},{"id":"blades.chain","op":"compose@1","args":["blades.seat.value","blades.turned.value"],"outputs":{"pose":"blades.chain.value"}},{"id":"blades.world","op":"compose@1","args":["host.chain.value","blades.chain.value"],"outputs":{"pose":"blades.world.value"}},{"id":"blades.motion","op":"axis-turn@1","args":["axis.ratio.0","axis.ratio.0","k.ratio.1","spin"],"outputs":{"pose":"blades.motion.value"},"params":{"from":"blades.seat","to":"blades.joint"}},{"id":"blades.turned","op":"compose@1","args":["blades.motion.value","blades.poseValue"],"outputs":{"pose":"blades.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":4000,"host.size.y":3000,"host.size.z":200,"ring.dimension.width":800,"ring.dimension.height":800,"ring.dimension.depth":40,"blades.dimension.width":680,"blades.dimension.height":120,"blades.dimension.depth":20},"stateDefaults":{"spin":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-4f5d6b":"#4f5d6b","palette.tpl-e8b04a":"#e8b04a"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"ring","material":{"token":"palette.tpl-4f5d6b"}},{"target":"blades","material":{"token":"palette.tpl-e8b04a"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"ring","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"ring","face":"back"},"origin":{"align":{"y":"max"}}},{"id":"blades","type":"revolute","body0":{"part":"host","face":"front"},"body1":{"part":"blades","face":"back"},"origin":{"gap":60,"align":{"y":{"mm":{"from":{"of":"part","part":"host","axis":"y"},"times":0.5,"plus":-400}}}},"axis":"Z","lowerLimit":-180,"upperLimit":180,"state":{"id":"spin"}}]}

package/recipes/duct-fan/recipe.json

@@ -0,0 +1,122 @@
+{
+  "name": "duct-fan",
+  "title": {
+    "ko": "덕트 팬",
+    "en": "duct fan"
+  },
+  "description": {
+    "ko": "고른 부품(벽) 앞면에 환기 팬의 테와 도는 날개를 넣습니다.",
+    "en": "A ventilation fan's ring and turning blades on the chosen part's front (a wall)."
+  },
+  "category": "utility",
+  "tags": [
+    "fan",
+    "exhaust",
+    "ventilation"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-ring",
+        "kind": "box",
+        "dimensions": {
+          "width": 800,
+          "height": 800,
+          "depth": 40
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-blades",
+        "kind": "box",
+        "dimensions": {
+          "width": 680,
+          "height": 120,
+          "depth": 20
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-ring",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-ring",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-blades",
+        "type": "revolute",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-blades",
+          "face": "back"
+        },
+        "origin": {
+          "gap": 60,
+          "align": {
+            "y": {
+              "mm": {
+                "from": {
+                  "of": "part",
+                  "part": "{target}",
+                  "axis": "y"
+                },
+                "times": 0.5,
+                "plus": -400
+              }
+            }
+          }
+        },
+        "axis": "Z",
+        "lowerLimit": -180,
+        "upperLimit": 180,
+        "state": {
+          "id": "{id}-spin"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-ring",
+      "material": {
+        "token": "palette.tpl-4f5d6b"
+      },
+      "palette": {
+        "palette.tpl-4f5d6b": "#4f5d6b"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-blades",
+      "material": {
+        "token": "palette.tpl-e8b04a"
+      },
+      "palette": {
+        "palette.tpl-e8b04a": "#e8b04a"
+      }
+    }
+  ]
+}

package/recipes/duct-fan/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "duct-fan",
+  "category": "utility",
+  "tags": [
+    "fan",
+    "exhaust",
+    "ventilation"
+  ],
+  "title": {
+    "ko": "덕트 팬",
+    "en": "duct fan"
+  },
+  "description": {
+    "ko": "고른 부품(벽) 앞면에 환기 팬의 테와 도는 날개를 넣습니다.",
+    "en": "A ventilation fan's ring and turning blades on the chosen part's front (a wall)."
+  },
+  "params": []
+}

package/recipes/emergency-stop/build.mts

@@ -0,0 +1,14 @@
+/* 비상정지 버튼 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 1600, y: 1400, z: 1000 }, 'TPL_EMERGENCY_STOP'))
+  m.box('base', 100, 100, 50)
+    .on('base', 'back', 'host', 'front', { x: 'max', y: 'max' })
+    .colour('base', 'palette.estop-base', '#f2c200')
+    .add({ id: 'button', kind: 'rounded-box', dimensions: { width: 70, height: 70, depth: 30, round: 12 } } as never)
+    .on('button', 'back', 'base', 'front')
+    .colour('button', 'palette.estop', '#d62828')
+    .moves('button', { type: 'prismatic', axis: 'Z', lower: -15, upper: 0, state: 'press' })
+  return m.asset
+}

package/recipes/emergency-stop/facts.md

@@ -0,0 +1,3 @@
+# emergency-stop — facts (not shown on screen; the guide's basis and our review)
+
+앞면 x 최대·y 최대. 노란 받침 100×100×50 + 빨간 버튼 70×70×30(모서리 12). 미끄러짐 Z −15~0. 한계: 앞에서 둥근 모양 없음(모서리는 위에서 본 면만 둥글다).

package/recipes/emergency-stop/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+For an emergency stop on a machine or a panel.
+
+## Putting it in
+
+1. Choose the part; the button goes at the upper right of its **front**.
+2. Press "put in".
+
+## Afterwards
+
+- The **press** control pushes the button in 15 mm.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- Seen from the front, the button is a square with slightly rounded corners.

package/recipes/emergency-stop/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+설비나 조작반에 비상정지 버튼을 달 때 씁니다.
+
+## 넣는 순서
+
+1. 부품을 고릅니다. 버튼은 **앞면의 오른쪽 위**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **누름** 조작값으로 버튼이 15 mm 들어갑니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 버튼은 앞에서 볼 때 둥글지 않고 모서리가 약간 둥근 네모입니다.

package/recipes/emergency-stop/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_EMERGENCY_STOP","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"base.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"base.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"base.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"button.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"button.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"button.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"button.dimension.round","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"press","unit":"mm","min":-15,"max":0,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.0","unit":"ratio","value":0},{"id":"axis.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"base.shape","op":"box-shape@1","args":["base.dimension.width","base.dimension.height","base.dimension.depth"],"outputs":{"shape":"base.shapeValue"},"params":{"frame":"base.local"}},{"id":"base.pose","op":"rigid@1","args":["base.on.host.own-edge.x.0.times.value","base.on.host.own-edge.y.0.times.value","base.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"base.poseValue"},"params":{"from":"base.local","to":"base.seat"}},{"id":"base","op":"place@1","args":["base.shapeValue","base.world.value"],"outputs":{"placed":"base.placed"}},{"id":"button.shape","op":"rounded-box@1","args":["button.dimension.width","button.dimension.height","button.dimension.depth","button.dimension.round"],"outputs":{"shape":"button.shapeValue"},"params":{"frame":"button.local"}},{"id":"button.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","button.on.base.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"button.poseValue"},"params":{"from":"button.local","to":"button.seat"}},{"id":"button","op":"place@1","args":["button.shapeValue","button.world.value"],"outputs":{"placed":"button.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"base.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"base.on.host.seat.z.0.times.value"}},{"id":"base.on.host.along.z.0.times","op":"mul@1","args":["base.dimension.depth","k.ratio.0_5"],"outputs":{"value":"base.on.host.along.z.0.times.value"}},{"id":"base.on.host.along.z.1.sum","op":"add@1","args":["base.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"base.on.host.along.z.1.sum.value"}},{"id":"base.on.host.edge.x.0.times","op":"mul@1","args":["host.size.x","k.ratio.0_5"],"outputs":{"value":"base.on.host.edge.x.0.times.value"}},{"id":"base.on.host.own-edge.x.0.times","op":"mul@1","args":["base.dimension.width","k.ratio._0_5"],"outputs":{"value":"base.on.host.own-edge.x.0.times.value"}},{"id":"base.on.host.edge.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"base.on.host.edge.y.0.times.value"}},{"id":"base.on.host.own-edge.y.0.times","op":"mul@1","args":["base.dimension.height","k.ratio._0_5"],"outputs":{"value":"base.on.host.own-edge.y.0.times.value"}},{"id":"base.seat.rigid","op":"rigid@1","args":["base.on.host.edge.x.0.times.value","base.on.host.edge.y.0.times.value","base.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"base.seat.value"},"params":{"from":"base.seat","to":"host.local"}},{"id":"base.chain","op":"compose@1","args":["base.seat.value","base.poseValue"],"outputs":{"pose":"base.chain.value"}},{"id":"base.world","op":"compose@1","args":["host.chain.value","base.chain.value"],"outputs":{"pose":"base.world.value"}},{"id":"button.on.base.seat.z.0.times","op":"mul@1","args":["base.dimension.depth","k.ratio.0_5"],"outputs":{"value":"button.on.base.seat.z.0.times.value"}},{"id":"button.on.base.along.z.0.times","op":"mul@1","args":["button.dimension.depth","k.ratio.0_5"],"outputs":{"value":"button.on.base.along.z.0.times.value"}},{"id":"button.on.base.along.z.1.sum","op":"add@1","args":["button.on.base.along.z.0.times.value","d.mm.0"],"outputs":{"value":"button.on.base.along.z.1.sum.value"}},{"id":"button.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","button.on.base.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"button.seat.value"},"params":{"from":"button.joint","to":"base.local"}},{"id":"button.chain","op":"compose@1","args":["button.seat.value","button.turned.value"],"outputs":{"pose":"button.chain.value"}},{"id":"button.world","op":"compose@1","args":["base.world.value","button.chain.value"],"outputs":{"pose":"button.world.value"}},{"id":"button.motion","op":"axis-slide@1","args":["axis.ratio.0","axis.ratio.0","axis.ratio.1","press"],"outputs":{"pose":"button.motion.value"},"params":{"from":"button.seat","to":"button.joint"}},{"id":"button.turned","op":"compose@1","args":["button.motion.value","button.poseValue"],"outputs":{"pose":"button.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":1600,"host.size.y":1400,"host.size.z":1000,"base.dimension.width":100,"base.dimension.height":100,"base.dimension.depth":50,"button.dimension.width":70,"button.dimension.height":70,"button.dimension.depth":30,"button.dimension.round":12},"stateDefaults":{"press":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-f2c200":"#f2c200","palette.tpl-d62828":"#d62828"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"base","material":{"token":"palette.tpl-f2c200"}},{"target":"button","material":{"token":"palette.tpl-d62828"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"base","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"base","face":"back"},"origin":{"align":{"x":"max","y":"max"}}},{"id":"button","type":"prismatic","body0":{"part":"base","face":"front"},"body1":{"part":"button","face":"back"},"origin":{},"axis":"Z","lowerLimit":-15,"upperLimit":0,"state":{"id":"press"}}]}

package/recipes/emergency-stop/recipe.json

@@ -0,0 +1,109 @@
+{
+  "name": "emergency-stop",
+  "title": {
+    "ko": "비상정지 버튼",
+    "en": "emergency stop"
+  },
+  "description": {
+    "ko": "고른 부품 앞면의 오른쪽 위에 빨간 비상정지 버튼을 넣습니다. 누르면 들어갑니다.",
+    "en": "A red emergency stop at the upper right of the chosen part's front; it goes in when pressed."
+  },
+  "category": "safety",
+  "tags": [
+    "emergency stop",
+    "button",
+    "safety"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-base",
+        "kind": "box",
+        "dimensions": {
+          "width": 100,
+          "height": 100,
+          "depth": 50
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-button",
+        "kind": "rounded-box",
+        "dimensions": {
+          "width": 70,
+          "height": 70,
+          "depth": 30,
+          "round": 12
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-base",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-base",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "x": "max",
+            "y": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-button",
+        "type": "prismatic",
+        "body0": {
+          "part": "{id}-base",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-button",
+          "face": "back"
+        },
+        "origin": {},
+        "axis": "Z",
+        "lowerLimit": -15,
+        "upperLimit": 0,
+        "state": {
+          "id": "{id}-press"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-base",
+      "material": {
+        "token": "palette.tpl-f2c200"
+      },
+      "palette": {
+        "palette.tpl-f2c200": "#f2c200"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-button",
+      "material": {
+        "token": "palette.tpl-d62828"
+      },
+      "palette": {
+        "palette.tpl-d62828": "#d62828"
+      }
+    }
+  ]
+}