@things-factory/figure-service 10.1.70 → 10.1.71

package/recipes/partition-wall/recipe.json

@@ -0,0 +1,203 @@
+{
+  "name": "partition-wall",
+  "title": {
+    "ko": "칸막이 벽",
+    "en": "partition wall"
+  },
+  "description": {
+    "ko": "고른 부품(바닥) 윗면 가운데에 폭 1.2 m 출입구가 난 칸막이 벽을 세웁니다. 벽 길이는 바닥 길이를 따릅니다.",
+    "en": "A partition wall with a 1.2 m opening across the middle of the chosen part's top (a floor); it follows the floor's length."
+  },
+  "category": "space",
+  "tags": [
+    "wall",
+    "partition",
+    "opening"
+  ],
+  "target": "part",
+  "params": [
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 3000,
+      "min": 2400,
+      "max": 8000,
+      "label": {
+        "ko": "벽 높이 (mm)",
+        "en": "wall height (mm)"
+      },
+      "hint": {
+        "ko": "바닥에서 벽 위까지. 출입구는 2.2 m 높이",
+        "en": "from the floor to the wall's top; the opening is 2.2 m high"
+      }
+    }
+  ],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-wall-left",
+        "kind": "box",
+        "dimensions": {
+          "width": 2400,
+          "height": {
+            "param": "height"
+          },
+          "depth": 100
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-wall-right",
+        "kind": "box",
+        "dimensions": {
+          "width": 2400,
+          "height": {
+            "param": "height"
+          },
+          "depth": 100
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-lintel",
+        "kind": "box",
+        "dimensions": {
+          "width": 1200,
+          "height": 800,
+          "depth": 100
+        }
+      }
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-wall-left",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "times": 0.5,
+      "plus": -600,
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-wall-right",
+      "axis": "x",
+      "source": {
+        "of": "part",
+        "part": "{target}",
+        "axis": "x"
+      },
+      "times": 0.5,
+      "plus": -600,
+      "narrowRange": true
+    },
+    {
+      "kind": "link-dimension",
+      "part": "{id}-lintel",
+      "axis": "y",
+      "source": {
+        "of": "part",
+        "part": "{id}-wall-left",
+        "axis": "y"
+      },
+      "plus": -2200,
+      "narrowRange": true
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-wall-left",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-wall-left",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "x": "min"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-wall-right",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-wall-right",
+          "face": "bottom"
+        },
+        "origin": {
+          "align": {
+            "x": "max"
+          }
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-lintel",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "top"
+        },
+        "body1": {
+          "part": "{id}-lintel",
+          "face": "bottom"
+        },
+        "origin": {
+          "gap": 2200
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-wall-left",
+      "material": {
+        "token": "palette.tpl-c7cdd3"
+      },
+      "palette": {
+        "palette.tpl-c7cdd3": "#c7cdd3"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-wall-right",
+      "material": {
+        "token": "palette.tpl-c7cdd3"
+      },
+      "palette": {
+        "palette.tpl-c7cdd3": "#c7cdd3"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-lintel",
+      "material": {
+        "token": "palette.tpl-c7cdd3"
+      },
+      "palette": {
+        "palette.tpl-c7cdd3": "#c7cdd3"
+      }
+    }
+  ]
+}

package/recipes/partition-wall/spec.json

@@ -0,0 +1,54 @@
+{
+  "name": "partition-wall",
+  "category": "space",
+  "tags": [
+    "wall",
+    "partition",
+    "opening"
+  ],
+  "title": {
+    "ko": "칸막이 벽",
+    "en": "partition wall"
+  },
+  "description": {
+    "ko": "고른 부품(바닥) 윗면 가운데에 폭 1.2 m 출입구가 난 칸막이 벽을 세웁니다. 벽 길이는 바닥 길이를 따릅니다.",
+    "en": "A partition wall with a 1.2 m opening across the middle of the chosen part's top (a floor); it follows the floor's length."
+  },
+  "params": [
+    {
+      "name": "height",
+      "kind": "mm",
+      "default": 3000,
+      "min": 2400,
+      "max": 8000,
+      "label": {
+        "ko": "벽 높이 (mm)",
+        "en": "wall height (mm)"
+      },
+      "hint": {
+        "ko": "바닥에서 벽 위까지. 출입구는 2.2 m 높이",
+        "en": "from the floor to the wall's top; the opening is 2.2 m high"
+      },
+      "bind": [
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-wall-left"
+            }
+          },
+          "path": "part.dimensions.height"
+        },
+        {
+          "step": {
+            "kind": "add-part",
+            "part": {
+              "id": "{id}-wall-right"
+            }
+          },
+          "path": "part.dimensions.height"
+        }
+      ]
+    }
+  ]
+}

package/recipes/pass-box/build.mts

@@ -0,0 +1,14 @@
+/* 패스 박스 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 4000, y: 3000, z: 6000 }, 'TPL_PASS_BOX'))
+  m.box('box', 600, 600, 500)
+    .on('box', 'back', 'host', 'front')
+    .colour('box', 'booth', '#7f93a6')
+    .box('door', 560, 560, 20)
+    .on('door', 'back', 'box', 'front', { x: 'min' })
+    .colour('door', 'leaf', '#5c7c96')
+    .moves('door', { type: 'revolute', axis: 'Y', lower: -100, upper: 0, state: 'open' })
+  return m.asset
+}

package/recipes/pass-box/facts.md

@@ -0,0 +1,3 @@
+# pass-box — facts (not shown on screen; the guide's basis and our review)
+
+앞면 가운데. 상자 600×600×500, 문 560×560×20 왼쪽 경첩, 회전 −100~0°.

package/recipes/pass-box/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+For a pass box to hand things through a clean-room wall.
+
+## Putting it in
+
+1. Choose the wall; the pass box goes in the middle of its **front**.
+2. Press "put in".
+
+## Afterwards
+
+- The **open** control swings its door up to 100°.
+- The parts are ordinary parts: change them one by one, or take them all out with one undo.
+
+## Good to know
+
+- It does not cut the wall; there is no back door.

package/recipes/pass-box/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+클린룸 벽으로 물건을 넘기는 패스 박스를 달 때 씁니다.
+
+## 넣는 순서
+
+1. 벽 부품을 고릅니다. 패스 박스는 **앞면 가운데**에 붙습니다.
+2. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- **열림** 조작값으로 앞문이 100°까지 열립니다.
+- 넣은 부품은 보통 부품이라 하나씩 고칠 수 있고, 되돌리기 한 번에 모두 빠집니다.
+
+## 알아 둘 것
+
+- 벽을 실제로 뚫지 않습니다. 뒤쪽 문은 없습니다.

package/recipes/pass-box/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_PASS_BOX","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"box.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"box.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"box.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"door.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"open","unit":"deg","min":-100,"max":0,"role":"state"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"axis.ratio.0","unit":"ratio","value":0},{"id":"axis.ratio.1","unit":"ratio","value":1}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"box.shape","op":"box-shape@1","args":["box.dimension.width","box.dimension.height","box.dimension.depth"],"outputs":{"shape":"box.shapeValue"},"params":{"frame":"box.local"}},{"id":"box.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","box.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"box.poseValue"},"params":{"from":"box.local","to":"box.seat"}},{"id":"box","op":"place@1","args":["box.shapeValue","box.world.value"],"outputs":{"placed":"box.placed"}},{"id":"door.shape","op":"box-shape@1","args":["door.dimension.width","door.dimension.height","door.dimension.depth"],"outputs":{"shape":"door.shapeValue"},"params":{"frame":"door.local"}},{"id":"door.pose","op":"rigid@1","args":["door.on.box.own-edge.x.0.times.value","d.mm.0","door.on.box.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"door.poseValue"},"params":{"from":"door.local","to":"door.seat"}},{"id":"door","op":"place@1","args":["door.shapeValue","door.world.value"],"outputs":{"placed":"door.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"box.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"box.on.host.seat.z.0.times.value"}},{"id":"box.on.host.along.z.0.times","op":"mul@1","args":["box.dimension.depth","k.ratio.0_5"],"outputs":{"value":"box.on.host.along.z.0.times.value"}},{"id":"box.on.host.along.z.1.sum","op":"add@1","args":["box.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"box.on.host.along.z.1.sum.value"}},{"id":"box.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","box.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"box.seat.value"},"params":{"from":"box.seat","to":"host.local"}},{"id":"box.chain","op":"compose@1","args":["box.seat.value","box.poseValue"],"outputs":{"pose":"box.chain.value"}},{"id":"box.world","op":"compose@1","args":["host.chain.value","box.chain.value"],"outputs":{"pose":"box.world.value"}},{"id":"door.on.box.seat.z.0.times","op":"mul@1","args":["box.dimension.depth","k.ratio.0_5"],"outputs":{"value":"door.on.box.seat.z.0.times.value"}},{"id":"door.on.box.along.z.0.times","op":"mul@1","args":["door.dimension.depth","k.ratio.0_5"],"outputs":{"value":"door.on.box.along.z.0.times.value"}},{"id":"door.on.box.along.z.1.sum","op":"add@1","args":["door.on.box.along.z.0.times.value","d.mm.0"],"outputs":{"value":"door.on.box.along.z.1.sum.value"}},{"id":"door.on.box.edge.x.0.times","op":"mul@1","args":["box.dimension.width","k.ratio._0_5"],"outputs":{"value":"door.on.box.edge.x.0.times.value"}},{"id":"door.on.box.own-edge.x.0.times","op":"mul@1","args":["door.dimension.width","k.ratio.0_5"],"outputs":{"value":"door.on.box.own-edge.x.0.times.value"}},{"id":"door.seat.rigid","op":"rigid@1","args":["door.on.box.edge.x.0.times.value","d.mm.0","door.on.box.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"door.seat.value"},"params":{"from":"door.joint","to":"box.local"}},{"id":"door.chain","op":"compose@1","args":["door.seat.value","door.turned.value"],"outputs":{"pose":"door.chain.value"}},{"id":"door.world","op":"compose@1","args":["box.world.value","door.chain.value"],"outputs":{"pose":"door.world.value"}},{"id":"door.motion","op":"axis-turn@1","args":["axis.ratio.0","axis.ratio.1","axis.ratio.0","open"],"outputs":{"pose":"door.motion.value"},"params":{"from":"door.seat","to":"door.joint"}},{"id":"door.turned","op":"compose@1","args":["door.motion.value","door.poseValue"],"outputs":{"pose":"door.turned.value"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":4000,"host.size.y":3000,"host.size.z":6000,"box.dimension.width":600,"box.dimension.height":600,"box.dimension.depth":500,"door.dimension.width":560,"door.dimension.height":560,"door.dimension.depth":20},"stateDefaults":{"open":0},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-7f93a6":"#7f93a6","palette.tpl-5c7c96":"#5c7c96"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"box","material":{"token":"palette.tpl-7f93a6"}},{"target":"door","material":{"token":"palette.tpl-5c7c96"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"box","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"box","face":"back"},"origin":{}},{"id":"door","type":"revolute","body0":{"part":"box","face":"front"},"body1":{"part":"door","face":"back"},"origin":{"align":{"x":"min"}},"axis":"Y","lowerLimit":-100,"upperLimit":0,"state":{"id":"open"}}]}

package/recipes/pass-box/recipe.json

@@ -0,0 +1,107 @@
+{
+  "name": "pass-box",
+  "title": {
+    "ko": "패스 박스",
+    "en": "pass box"
+  },
+  "description": {
+    "ko": "고른 부품(벽)의 앞면 가운데에 물건을 넘기는 패스 박스와 여닫이 문을 넣습니다.",
+    "en": "A pass box and its hinged door in the middle of the chosen part's front (a wall)."
+  },
+  "category": "door",
+  "tags": [
+    "pass box",
+    "cleanroom",
+    "transfer"
+  ],
+  "target": "part",
+  "params": [],
+  "steps": [
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-box",
+        "kind": "box",
+        "dimensions": {
+          "width": 600,
+          "height": 600,
+          "depth": 500
+        }
+      }
+    },
+    {
+      "kind": "add-part",
+      "part": {
+        "id": "{id}-door",
+        "kind": "box",
+        "dimensions": {
+          "width": 560,
+          "height": 560,
+          "depth": 20
+        }
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-box",
+        "type": "fixed",
+        "body0": {
+          "part": "{target}",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-box",
+          "face": "back"
+        },
+        "origin": {}
+      }
+    },
+    {
+      "kind": "set-joint",
+      "joint": {
+        "id": "{id}-door",
+        "type": "revolute",
+        "body0": {
+          "part": "{id}-box",
+          "face": "front"
+        },
+        "body1": {
+          "part": "{id}-door",
+          "face": "back"
+        },
+        "origin": {
+          "align": {
+            "x": "min"
+          }
+        },
+        "axis": "Y",
+        "lowerLimit": -100,
+        "upperLimit": 0,
+        "state": {
+          "id": "{id}-open"
+        }
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-box",
+      "material": {
+        "token": "palette.tpl-7f93a6"
+      },
+      "palette": {
+        "palette.tpl-7f93a6": "#7f93a6"
+      }
+    },
+    {
+      "kind": "set-material",
+      "target": "{id}-door",
+      "material": {
+        "token": "palette.tpl-5c7c96"
+      },
+      "palette": {
+        "palette.tpl-5c7c96": "#5c7c96"
+      }
+    }
+  ]
+}

package/recipes/pass-box/spec.json

@@ -0,0 +1,18 @@
+{
+  "name": "pass-box",
+  "category": "door",
+  "tags": [
+    "pass box",
+    "cleanroom",
+    "transfer"
+  ],
+  "title": {
+    "ko": "패스 박스",
+    "en": "pass box"
+  },
+  "description": {
+    "ko": "고른 부품(벽)의 앞면 가운데에 물건을 넘기는 패스 박스와 여닫이 문을 넣습니다.",
+    "en": "A pass box and its hinged door in the middle of the chosen part's front (a wall)."
+  },
+  "params": []
+}

package/recipes/peg-board/build.mts

@@ -0,0 +1,14 @@
+/* 공구판 — the model. */
+import { host, Model } from '../_lib/model.mts'
+
+export default function build() {
+  const m = new Model(host({ x: 4000, y: 3000, z: 200 }, 'TPL_PEG_BOARD'))
+  m.box('board', 1200, 800, 15)
+    .on('board', 'back', 'host', 'front')
+    .colour('board', 'pegboard', '#a8875a')
+    .box('hook', 10, 10, 80)
+    .on('hook', 'back', 'board', 'front')
+    .colour('hook', 'hook', '#2f3437')
+    .do({ kind: 'make-repeat', part: 'hook', axis: 'x', pitch: 150, narrowRange: true })
+  return m.asset
+}

package/recipes/peg-board/facts.md

@@ -0,0 +1,3 @@
+# peg-board — facts (not shown on screen; the guide's basis and our review)
+
+앞면 가운데. 판 1200×800×15. 걸이 10×10×80 판 앞면, make-repeat x pitch, narrowRange. 간격 50~600.

package/recipes/peg-board/guide.en.md

@@ -0,0 +1,17 @@
+## When to use it
+
+To put a board for hanging tools on a bench back or wall.
+
+## Putting it in
+
+1. Choose the wall or back panel; the board goes in the middle of its **front**.
+2. Set the **hook spacing** in mm.
+3. Press "put in".
+
+## Afterwards
+
+- The hooks stand in one row across the board at that spacing. Resize the board and the number of hooks follows.
+
+## Good to know
+
+- The board is 1200 × 800 mm.

package/recipes/peg-board/guide.ko.md

@@ -0,0 +1,17 @@
+## 언제 쓰나
+
+작업대 뒤판 · 벽에 공구를 거는 판을 둘 때 씁니다.
+
+## 넣는 순서
+
+1. 벽이나 뒤판을 고릅니다. 공구판은 **앞면** 가운데에 붙습니다.
+2. **걸이 간격**을 mm로 정합니다.
+3. 「넣기」를 누릅니다.
+
+## 넣은 뒤
+
+- 걸이는 공구판 폭 안에서 간격대로 한 줄 늘어섭니다. 공구판 폭을 바꾸면 걸이 수가 따라 바뀝니다.
+
+## 알아 둘 것
+
+- 공구판은 1200 × 800 mm입니다.

package/recipes/peg-board/models/default.json

@@ -0,0 +1 @@
+{"version":"figure-v3-asset-1","name":"TPL_PEG_BOARD","document":{"version":"figure-v3-prototype-1","model":{"version":"r3-spatial-1","inputs":[{"id":"host.size.x","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.y","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"host.size.z","unit":"mm","min":5e-324,"max":1.7976931348623157e+308,"role":"design"},{"id":"board.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"board.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"board.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"hook.dimension.width","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"hook.dimension.height","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"},{"id":"hook.dimension.depth","unit":"mm","min":0,"max":1.7976931348623157e+308,"role":"design"}],"constants":[{"id":"d.mm.0","unit":"mm","value":0},{"id":"a.deg.0","unit":"deg","value":0},{"id":"k.ratio.0_5","unit":"ratio","value":0.5},{"id":"k.ratio._0_5","unit":"ratio","value":-0.5},{"id":"limit.count.100","unit":"count","value":100},{"id":"d.mm.150","unit":"mm","value":150}],"nodes":[{"id":"host.shape","op":"box-shape@1","args":["host.size.x","host.size.y","host.size.z"],"outputs":{"shape":"host.shapeValue"},"params":{"frame":"host.local"}},{"id":"host.pose","op":"rigid@1","args":["d.mm.0","host.on.plane.stand.y.1.sum.value","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.poseValue"},"params":{"from":"host.local","to":"host.seat"}},{"id":"host","op":"place@1","args":["host.shapeValue","host.chain.value"],"outputs":{"placed":"host.placed"}},{"id":"board.shape","op":"box-shape@1","args":["board.dimension.width","board.dimension.height","board.dimension.depth"],"outputs":{"shape":"board.shapeValue"},"params":{"frame":"board.local"}},{"id":"board.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","board.on.host.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"board.poseValue"},"params":{"from":"board.local","to":"board.seat"}},{"id":"board","op":"place@1","args":["board.shapeValue","board.world.value"],"outputs":{"placed":"board.placed"}},{"id":"hook.shape","op":"box-shape@1","args":["hook.dimension.width","hook.dimension.height","hook.dimension.depth"],"outputs":{"shape":"hook.shapeValue"},"params":{"frame":"hook.local"}},{"id":"hook.pose","op":"rigid@1","args":["d.mm.0","d.mm.0","hook.on.board.along.z.1.sum.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"hook.poseValue"},"params":{"from":"hook.local","to":"hook.seat"}},{"id":"hook","op":"member@1","args":["hook.shapeValue","hook.poseValue"],"outputs":{"placed":"hook.placed"}},{"id":"host.on.plane.stand.y.0.times","op":"mul@1","args":["host.size.y","k.ratio.0_5"],"outputs":{"value":"host.on.plane.stand.y.0.times.value"}},{"id":"host.on.plane.stand.y.1.sum","op":"add@1","args":["host.on.plane.stand.y.0.times.value","d.mm.0"],"outputs":{"value":"host.on.plane.stand.y.1.sum.value"}},{"id":"host.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","d.mm.0","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"host.seat.value"},"params":{"from":"host.seat","to":"asset"}},{"id":"host.chain","op":"compose@1","args":["host.seat.value","host.poseValue"],"outputs":{"pose":"host.chain.value"}},{"id":"board.on.host.seat.z.0.times","op":"mul@1","args":["host.size.z","k.ratio.0_5"],"outputs":{"value":"board.on.host.seat.z.0.times.value"}},{"id":"board.on.host.along.z.0.times","op":"mul@1","args":["board.dimension.depth","k.ratio.0_5"],"outputs":{"value":"board.on.host.along.z.0.times.value"}},{"id":"board.on.host.along.z.1.sum","op":"add@1","args":["board.on.host.along.z.0.times.value","d.mm.0"],"outputs":{"value":"board.on.host.along.z.1.sum.value"}},{"id":"board.seat.rigid","op":"rigid@1","args":["d.mm.0","d.mm.0","board.on.host.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"board.seat.value"},"params":{"from":"board.seat","to":"host.local"}},{"id":"board.chain","op":"compose@1","args":["board.seat.value","board.poseValue"],"outputs":{"pose":"board.chain.value"}},{"id":"board.world","op":"compose@1","args":["host.chain.value","board.chain.value"],"outputs":{"pose":"board.world.value"}},{"id":"hook.on.board.seat.z.0.times","op":"mul@1","args":["board.dimension.depth","k.ratio.0_5"],"outputs":{"value":"hook.on.board.seat.z.0.times.value"}},{"id":"hook.on.board.along.z.0.times","op":"mul@1","args":["hook.dimension.depth","k.ratio.0_5"],"outputs":{"value":"hook.on.board.along.z.0.times.value"}},{"id":"hook.on.board.along.z.1.sum","op":"add@1","args":["hook.on.board.along.z.0.times.value","d.mm.0"],"outputs":{"value":"hook.on.board.along.z.1.sum.value"}},{"id":"hook.seat.rigid","op":"rigid@1","args":["hook.row.start.0.times.value","d.mm.0","hook.on.board.seat.z.0.times.value","a.deg.0","a.deg.0","a.deg.0"],"outputs":{"pose":"hook.seat.value"},"params":{"from":"hook.seat","to":"board.local"}},{"id":"hook.row.start.0.times","op":"mul@1","args":["board.dimension.width","k.ratio._0_5"],"outputs":{"value":"hook.row.start.0.times.value"}},{"id":"hook.row.length.0.times","op":"mul@1","args":["board.dimension.width","k.ratio.0_5"],"outputs":{"value":"hook.row.length.0.times.value"}},{"id":"hook.row.length.1.times","op":"mul@1","args":["board.dimension.width","k.ratio.0_5"],"outputs":{"value":"hook.row.length.1.times.value"}},{"id":"hook.row.length.1.sum","op":"add@1","args":["hook.row.length.0.times.value","hook.row.length.1.times.value"],"outputs":{"value":"hook.row.length.1.sum.value"}},{"id":"hook.row.extent.0.times","op":"mul@1","args":["hook.dimension.width","k.ratio.0_5"],"outputs":{"value":"hook.row.extent.0.times.value"}},{"id":"hook.row.extent.1.times","op":"mul@1","args":["hook.dimension.width","k.ratio.0_5"],"outputs":{"value":"hook.row.extent.1.times.value"}},{"id":"hook.row.extent.1.sum","op":"add@1","args":["hook.row.extent.0.times.value","hook.row.extent.1.times.value"],"outputs":{"value":"hook.row.extent.1.sum.value"}},{"id":"hook.layout","op":"fit-pitch@1","args":["hook.row.length.1.sum.value","d.mm.0","d.mm.0","hook.row.extent.1.sum.value","d.mm.150","k.ratio.0_5","limit.count.100"],"outputs":{"layout":"hook.layout.value"}},{"id":"hook.assembly","op":"assembly@1","args":["hook.placed"],"outputs":{"assembly":"hook.assembly.value"}},{"id":"hook.row","op":"compose@1","args":["board.world.value","hook.seat.value"],"outputs":{"pose":"hook.row.value"}},{"id":"hook.repeat","op":"repeat@1","args":["hook.layout.value","hook.assembly.value","hook.row.value"],"outputs":{"collection":"hook.repeat.value"},"params":{"axis":"x"}}]},"capabilities":{"version":"r3-capability-3","assetFrame":"asset","bindings":[]}},"designInputs":{"host.size.x":4000,"host.size.y":3000,"host.size.z":200,"board.dimension.width":1200,"board.dimension.height":800,"board.dimension.depth":15,"hook.dimension.width":10,"hook.dimension.height":10,"hook.dimension.depth":80},"stateDefaults":{},"palette":{"palette.primary":"#477b9e","palette.host":"#d9dde2","palette.tpl-a8875a":"#a8875a","palette.tpl-2f3437":"#2f3437"},"appearance":[{"target":"host","material":{"token":"palette.host"}},{"target":"board","material":{"token":"palette.tpl-a8875a"}},{"target":"hook","material":{"token":"palette.tpl-2f3437"}}],"joints":[{"id":"host","type":"fixed","body0":{"plane":"mounting-plane"},"body1":{"part":"host","face":"bottom"},"origin":{}},{"id":"board","type":"fixed","body0":{"part":"host","face":"front"},"body1":{"part":"board","face":"back"},"origin":{}},{"id":"hook","type":"fixed","body0":{"part":"board","face":"front"},"body1":{"part":"hook","face":"back"},"origin":{},"repeat":{"axis":"X","pitch":150}}]}